MSA-907: Care Pendant

devicetypes/mitchpond/iris-care-pendant.src/iris-care-pendant.groovy

@@ -0,0 +1,225 @@
+/**
+ *  Iris Care Pendant
+ *	
+ *  Copyright 2015 Mitch Pond
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+metadata {
+	definition (name: "Iris Care Pendant", namespace: "mitchpond", author: "Mitch Pond") {
+    	capability "Sensor"
+    	capability "Battery"
+		capability "Configuration"
+        capability "Button"
+        
+        command "enrollResponse"
+
+		fingerprint endpointId: "01", inClusters: "0000,0001,0003,0020,0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L"
+	}
+
+	preferences {}
+ 
+	tiles(scale: 2) {
+    	standardTile("button", "device.button", decoration: "flat", width: 2, height:2) {
+        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+            state "pushed", backgroundColor: "#79b821"
+        }
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["battery"])
+		details(["button","battery"])
+	}
+}
+ 
+def parse(String description) {
+	//log.debug "description: $description"
+    
+	def results = []
+	if (description?.startsWith('catchall:')) {
+		results = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		results = parseReportAttributeMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	results = parseIasMessage(description)
+    }
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        results = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return results
+}
+ 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+ 
+private parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+
+	def results = []
+    
+	if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		log.debug "Received battery level report"
+		results = createEvent(getBatteryResult(Integer.parseInt(descMap.value, 16)))
+	}
+
+	return results
+}
+
+private parseIasMessage(String description) {
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
+	int status = Integer.decode(msgCode)
+	def linkText = getLinkText(device)
+
+	def results = []
+	//log.debug(description)
+	if (status & 0b00000010) {results << createEvent(getButtonResult('pushed'))}
+	else if (~status & 0b00000010) results << createEvent(getButtonResult('released'))
+
+	if (status & 0b00000100) {
+    	//tampered
+	}
+	else if (~status & 0b00000100) {
+		//not tampered
+	}
+	
+	if (status & 0b00001000) {
+	}
+	else if (~status & 0b00001000) {
+		//log.debug "${linkText} battery OK"
+	}
+	//log.debug results
+	return results
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+    
+    def result = [
+    	name: 'battery'
+    ]
+    
+	def volts = rawValue / 10
+	def descriptionText
+	if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
+		def minVolts = 2.1
+    	def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		result.value = Math.min(100, (int) pct * 100)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+	}
+
+	return result
+}
+
+private Map getButtonResult(value) {
+	//log.debug 'Button Status'
+	def linkText = getLinkText(device)
+	def descriptionText = "${linkText} was ${value == 'pushed' ? 'pushed' : 'released'}"
+	return [
+		name: 'button',
+		value: value,
+        data: [buttonNumber: 1],
+		descriptionText: descriptionText,
+        displayed: true,
+        isStateChange: true
+	]
+}
+
+def configure() {
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 100",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 3600 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+	]
+    return configCmds
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -1,5 +1,7 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Ecobee Sensor
+ *
+ *  Copyright 2015 Juan Risso
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -10,9 +12,6 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
- *	Ecobee Sensor
- *
- *	Author: SmartThings
  */
 metadata {
 	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -27,16 +26,7 @@ metadata {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
 					backgroundColors:[
-							// Celsius
-							[value: 0, color: "#153591"],
-							[value: 7, color: "#1e9cbb"],
-							[value: 15, color: "#90d2a7"],
-							[value: 23, color: "#44b621"],
-							[value: 28, color: "#f1d801"],
-							[value: 35, color: "#d04e00"],
-							[value: 37, color: "#bc2323"],
-							// Fahrenheit
-							[value: 40, color: "#153591"],
+							[value: 31, color: "#153591"],
 							[value: 44, color: "#1e9cbb"],
 							[value: 59, color: "#90d2a7"],
 							[value: 74, color: "#44b621"],

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -16,8 +16,8 @@ metadata {
 		capability "Sensor"
 
 		command "setAdjustedColor"
-		command "reset"
-		command "refresh"
+                command "reset"        
+                command "refresh"
 	}
 
 	simulator {
@@ -68,17 +68,17 @@ def parse(description) {
 }
 
 // handle commands
-void on() {
+def on() {
 	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-void off() {
+def off() {
 	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-void nextLevel() {
+def nextLevel() {
 	def level = device.latestValue("level") as Integer ?: 0
 	if (level <= 100) {
 		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
@@ -89,25 +89,25 @@ void nextLevel() {
 	setLevel(level)
 }
 
-void setLevel(percent) {
+def setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
 	sendEvent(name: "level", value: percent)
 }
 
-void setSaturation(percent) {
+def setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	parent.setSaturation(this, percent)
 	sendEvent(name: "saturation", value: percent)
 }
 
-void setHue(percent) {
+def setHue(percent) {
 	log.debug "Executing 'setHue'"
 	parent.setHue(this, percent)
 	sendEvent(name: "hue", value: percent)
 }
 
-void setColor(value) {
+def setColor(value) {
 	log.debug "setColor: ${value}, $this"
 	parent.setColor(this, value)
 	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
@@ -117,25 +117,25 @@ void setColor(value) {
 	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
 }
 
-void reset() {
+def reset() {
 	log.debug "Executing 'reset'"
-	def value = [level:100, hex:"#90C638", saturation:56, hue:23]
-	setAdjustedColor(value)
+    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
+    setAdjustedColor(value)
 	parent.poll()
 }
 
-void setAdjustedColor(value) {
+def setAdjustedColor(value) {
 	if (value) {
-		log.trace "setAdjustedColor: ${value}"
-		def adjusted = value + [:]
-		adjusted.hue = adjustOutgoingHue(value.hue)
-		// Needed because color picker always sends 100
-		adjusted.level = null
-		setColor(adjusted)
-	}
+        log.trace "setAdjustedColor: ${value}"
+        def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
+        // Needed because color picker always sends 100
+        adjusted.level = null 
+        setColor(adjusted)
+    }
 }
 
-void refresh() {
+def refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -12,48 +12,48 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-
-		command "refresh"
+       
+        command "refresh"       
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+    
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-			}
-			tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "level", label: 'Level ${currentValue}%'
-			}
-		}
-
+        }
+    
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
+        }
+        
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
+           
+        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }        
 
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-
-		standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["rich-control", "refresh"])
-	}
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }    
 }
 
 // parse events into attributes
@@ -74,23 +74,23 @@ def parse(description) {
 }
 
 // handle commands
-void on() {
+def on() {
 	parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-void off() {
+def off() {
 	parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-void setLevel(percent) {
+def setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
 	sendEvent(name: "level", value: percent)
 }
 
-void refresh() {
+def refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,31 +0,0 @@
-#==============================================================================
-#  Copyright 2016 SmartThings
-#
-#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
-#  use this file except in compliance with the License. You may obtain a copy 
-#  of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software 
-#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
-#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
-#  License for the specific language governing permissions and limitations 
-#  under the License.
-#==============================================================================
-# Purpose: Mobile Presence i18n Translation File
-#
-# Filename: mobile-presence.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160205 TW Initial release with informal Korean translation.
-#==============================================================================
-# Korean (ko)
-# Device Preferences
-'''Give your device a name'''.ko=기기 이름 바꾸기
-'''Set Device Image'''.ko=디바이스 이미지 설정
-# Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}님이 나갔습니다
-'''{{ linkText }} has arrived'''.ko={{ linkText }}님이 도착했습니다
-'''present'''.ko=집안
-'''not present'''.ko=부재중

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,14 +0,0 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
-'''battery'''.ko=배터리
-'''dry'''.ko=건조
-'''wet'''.ko=누수
-'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
-'''{{ device.displayName }} is {{ value | translate }}'''.ko={{ device.displayName }}이(가) {{ value | translate }}입니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,13 +0,0 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
-'''battery'''.ko=배터리
-'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }} 동작이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,20 +0,0 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
-'''No'''.ko=아니요
-'''Tap to set'''.ko=눌러서 설정
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
-'''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
-'''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Yes'''.ko=예
-'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
-'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}이(가) 활성화되었습니다
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}이(가) 닫혔습니다
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}이(가) 비활성화되었습니다
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}이(가) 열렸습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -72,12 +72,15 @@ metadata {
 				]
 			)
 		}
+		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
+			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
+		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "battery"])
+		details(["contact", "acceleration", "temperature", "3axis", "battery"])
 	}
 }
 

smartapps/acrow311/controlled-power-off.src/controlled-power-off.groovy

@@ -1,65 +0,0 @@
-/**
- *  Controlled Power Off
- *
- *  Copyright 2016 Andrew Crow
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Controlled Power Off",
-    namespace: "acrow311",
-    author: "Andrew Crow",
-    description: "Application used to power off devices that should be allowed to finish their cycle before being shut down such as air conditions and tankless water heaters.  Application will monitor electric usage and delay shutdown until usage has returned to inactive state.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	section("Shutdown when device not active") {
-		input(name: "meter", type: "capability.powerMeter", title: "When This Power Meter...", required: true, multiple: false, description: null)
-        input(name: "threshold", type: "number", title: "Reports Below...", required: true, description: "In watts, enter integer value")
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	initialize()
-}
-
-def initialize() {
-	unsubscribe()
-	subscribe(meter, "power", meterHandler)
-}
-
-def meterHandler(evt) {
-    def meterValue = evt.value as double
-    def thresholdValue = threshold as int
-	def switchState = meter.currentValue("switch") == "on"  // Get current switch status (on = true)
-	
-    if (switchState) {  // If the switch is already off, do nothing
-        if (meterValue < thresholdValue) { // If the power consumption is low enough, turn off switch
-            log.info "${meter} reported energy ${meterValue} below ${threshold}. Turning off switch."
-            sendNotificationEvent("${meter} not running, shutting down.")
-            meter.off()
-        } else { // Power consumption too high - device connected to switch in use - do not shutdown.
-            sendNotificationEvent("Power consumption too high to shut off ${meter}.  Attempting again in a moment.")
-            log.info "${meter} reported energy ${meterValue} above ${threshold}. Leaving switch on."
-        }
-    }
-}

smartapps/mitchpond/3400-x-keypad-manager.src/3400-x-keypad-manager.groovy

@@ -0,0 +1,129 @@
+/**
+ *  3400-X Keypad Manager
+ *
+ *  Copyright 2015 Mitch Pond
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "3400-X Keypad Manager",
+    namespace: "mitchpond",
+    author: "Mitch Pond",
+    description: "Service manager for Centralite 3400-X security keypad. Keeps keypad state in sync with Smart Home Monitor",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    singleInstance: false)
+
+
+preferences {
+	page(name: "setupPage")
+}
+
+def setupPage() {
+	dynamicPage(name: "setupPage",title: "3400-X Keypad Manager", install: true, uninstall: true) {
+        section("Settings") {
+            input(name: "keypad", title: "Keypad", type: "capability.lockCodes", multiple: false, required: true)
+            input(name: "pin"	, title: "PIN code", type: "number", range: "0000..9999", required: true)
+            paragraph "PIN should be four digits. Shorter PINs will be padded with leading zeroes. (42 becomes 0042)"
+            label(title: "Assign a name", required: false)
+        }
+        def routines = location.helloHome?.getPhrases()*.label
+        routines?.sort()
+        section("Routines", hideable: true, hidden: true) {
+        	input(name: "armRoutine", title: "Arm/Away routine", type: "enum", options: routines, required: false)
+            input(name: "disarmRoutine", title: "Disarm routine", type: "enum", options: routines, required: false)
+            input(name: "stayRoutine", title: "Arm/Stay routine", type: "enum", options: routines, required: false)
+            //input(name: "nightRoutine", title: "Arm/Night routine", type: "enum", options: routines, required: false)
+        }
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(location,"alarmSystemStatus",alarmStatusHandler)
+    subscribe(keypad,"codeEntered",codeEntryHandler)   
+
+    //initialize keypad to correct state
+    def event = [name:"alarmSystemStatus", value: location.currentState("alarmSystemStatus").value, 
+    			displayed: true, description: "System Status is ${shmState}"]
+    alarmStatusHandler(event)
+}
+
+//Returns the PIN padded with zeroes to 4 digits
+private String getPIN(){
+	return settings.pin.value.toString().padLeft(4,'0')
+}
+
+// TODO: implement event handlers
+def alarmStatusHandler(event) {
+	log.debug "Keypad manager caught alarm status change: "+event.value
+    if (event.value == "off") keypad?.setDisarmed()
+    else if (event.value == "away") keypad?.setArmedAway()
+    else if (event.value == "stay") keypad?.setArmedStay()
+}
+
+private sendSHMEvent(String shmState){
+	def event = [name:"alarmSystemStatus", value: shmState, 
+    			displayed: true, description: "System Status is ${shmState}"]
+    sendLocationEvent(event)
+}
+
+private execRoutine(armMode) {
+	if (armMode == 'away') location.helloHome?.execute(settings.armRoutine)
+    else if (armMode == 'stay') location.helloHome?.execute(settings.stayRoutine)
+    else if (armMode == 'off') location.helloHome?.execute(settings.disarmRoutine)    
+}
+
+def codeEntryHandler(evt){
+	//do stuff
+    log.debug "Caught code entry event! ${evt.value.value}"
+    
+    def codeEntered = evt.value as String
+    def correctCode = getPIN()
+    def data = evt.data as String
+    def armMode = ''
+    
+    if (data == '0') armMode = 'off'
+    else if (data == '3') armMode = 'away'
+    else if (data == '1') armMode = 'stay'
+    else if (data == '2') armMode = 'stay'	//Currently no separate night mode for SHM, set to 'stay'
+    else {
+    	log.error "${app.label}: Unexpected arm mode sent by keypad!: "+data
+        return []
+        }
+    
+    if (codeEntered == correctCode) {
+    	log.debug "Correct PIN entered. Change SHM state to ${armMode}"
+        keypad.acknowledgeArmRequest(data)
+        sendSHMEvent(armMode)
+		execRoutine(armMode)
+    }
+    else {
+    	log.debug "Invalid PIN"
+        //Could also call acknowledgeArmRequest() with a parameter of 4 to report invalid code. Opportunity to simplify code?
+    	keypad.sendInvalidKeycodeResponse()
+    }
+}

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -235,7 +235,6 @@ def connectionStatus(message, redirectUrl = null) {
 
 def getEcobeeThermostats() {
 	log.debug "getting device list"
-	atomicState.remoteSensors = []
 
 	def requestBody = '{"selection":{"selectionType":"registered","selectionMatch":"","includeRuntime":true,"includeSensors":true}}'
 
@@ -252,7 +251,7 @@ def getEcobeeThermostats() {
 
 			if (resp.status == 200) {
 				resp.data.thermostatList.each { stat ->
-					atomicState.remoteSensors = atomicState.remoteSensors == null ? stat.remoteSensors : atomicState.remoteSensors <<  stat.remoteSensors
+					atomicState.remoteSensors = stat.remoteSensors
 					def dni = [app.id, stat.identifier].join('.')
 					stats[dni] = getThermostatDisplayName(stat)
 				}
@@ -274,14 +273,11 @@ def getEcobeeThermostats() {
 
 Map sensorsDiscovered() {
 	def map = [:]
-	log.info "list ${atomicState.remoteSensors}"
-	atomicState.remoteSensors.each { sensors ->
-		sensors.each {
-			if (it.type != "thermostat") {
-				def value = "${it?.name}"
-				def key = "ecobee_sensor-"+ it?.id + "-" + it?.code
-				map["${key}"] = value
-			}
+	atomicState.remoteSensors.each {
+		if (it.type != "thermostat") {
+			def value = "${it?.name}"
+			def key = "ecobee_sensor-"+ it?.id + "-" + it?.code
+			map["${key}"] = value
 		}
 	}
 	atomicState.sensors = map

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -455,7 +455,7 @@ def locationHandler(evt) {
 					log.error "/description.xml returned a bridge that didn't exist"
 				}
 			}
-		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
+		} else if(headerString?.contains("json")) {
             log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
@@ -494,11 +494,6 @@ def doDeviceSync(){
 	discoverBridges()
 }
 
-def isValidSource(macAddress) {
-	def vbridges = getVerifiedHueBridges()
-	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
-}
-
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////