Merge pull request #599 from SmartThingsCommunity/staging

Rolling up changes to production from staging 2016-03-10 Release

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,4 +1,3 @@
-
 /**
  *  Hue Bulb
  *
@@ -11,13 +10,14 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-		command "reset"
-		command "refresh"
+        command "reset"
+        command "refresh"
 	}
 
 	simulator {
@@ -25,7 +25,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,23 +33,58 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-	}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-	main(["switch"])
-	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
+		main(["switch"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
 }
 
 // parse events into attributes
@@ -119,19 +154,27 @@ void setColor(value) {
 
 void reset() {
 	log.debug "Executing 'reset'"
-	def value = [level:100, hex:"#90C638", saturation:56, hue:23]
-	setAdjustedColor(value)
+    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
+    setAdjustedColor(value)
 	parent.poll()
 }
 
 void setAdjustedColor(value) {
 	if (value) {
-		log.trace "setAdjustedColor: ${value}"
-		def adjusted = value + [:]
-		adjusted.hue = adjustOutgoingHue(value.hue)
-		// Needed because color picker always sends 100
-		adjusted.level = null
-		setColor(adjusted)
+        log.trace "setAdjustedColor: ${value}"
+        def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
+        // Needed because color picker always sends 100
+        adjusted.level = null
+        setColor(adjusted)
+    }
+}
+
+void setColorTemperature(value) {
+	if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
 	}
 }
 

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -13,47 +13,47 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		command "refresh"
+        command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-			}
-			tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "level", label: 'Level ${currentValue}%'
-			}
-		}
+        }
 
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
+        }
 
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
 
-		standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
 
-		main(["switch"])
-		details(["rich-control", "refresh"])
-	}
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
 }
 
 // parse events into attributes

smartapps/acrow311/controlled-power-off.src/controlled-power-off.groovy

@@ -1,65 +0,0 @@
-/**
- *  Controlled Power Off
- *
- *  Copyright 2016 Andrew Crow
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Controlled Power Off",
-    namespace: "acrow311",
-    author: "Andrew Crow",
-    description: "Application used to power off devices that should be allowed to finish their cycle before being shut down such as air conditions and tankless water heaters.  Application will monitor electric usage and delay shutdown until usage has returned to inactive state.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	section("Shutdown when device not active") {
-		input(name: "meter", type: "capability.powerMeter", title: "When This Power Meter...", required: true, multiple: false, description: null)
-        input(name: "threshold", type: "number", title: "Reports Below...", required: true, description: "In watts, enter integer value")
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	initialize()
-}
-
-def initialize() {
-	unsubscribe()
-	subscribe(meter, "power", meterHandler)
-}
-
-def meterHandler(evt) {
-    def meterValue = evt.value as double
-    def thresholdValue = threshold as int
-	def switchState = meter.currentValue("switch") == "on"  // Get current switch status (on = true)
-	
-    if (switchState) {  // If the switch is already off, do nothing
-        if (meterValue < thresholdValue) { // If the power consumption is low enough, turn off switch
-            log.info "${meter} reported energy ${meterValue} below ${threshold}. Turning off switch."
-            sendNotificationEvent("${meter} not running, shutting down.")
-            meter.off()
-        } else { // Power consumption too high - device connected to switch in use - do not shutdown.
-            sendNotificationEvent("Power consumption too high to shut off ${meter}.  Attempting again in a moment.")
-            log.info "${meter} reported energy ${meterValue} above ${threshold}. Leaving switch on."
-        }
-    }
-}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,7 +15,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Hue (Connect)",
 	namespace: "smartthings",
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -58,7 +58,7 @@ def bridgeDiscovery(params=[:])
     	state.bridges = [:]
         state.bridgeRefreshCount = 0
         app.updateSetting("selectedHue", "")
-    }    
+    }
 
 	subscribe(location, null, locationHandler, [filterEvents:false])
 
@@ -130,8 +130,8 @@ def bulbDiscovery() {
 	def bulboptions = bulbsDiscovered() ?: [:]
 	def numFound = bulboptions.size() ?: 0
     if (numFound == 0)
-    	app.updateSetting("selectedBulbs", "") 
-        
+    	app.updateSetting("selectedBulbs", "")
+
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
@@ -140,7 +140,7 @@ def bulbDiscovery() {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
-		section {				
+		section {
 			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
@@ -246,13 +246,13 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
-	unsubscribe() 
-    unschedule()    
+	unsubscribe()
+    unschedule()
 	initialize()
 }
 
 def initialize() {
-	log.debug "Initializing"  
+	log.debug "Initializing"
     unsubscribe(bridge)
     state.inBulbDiscovery = false
     state.bridgeRefreshCount = 0
@@ -281,18 +281,18 @@ def uninstalled(){
 def bulbListHandler(hub, data = "") {
 	def msg = "Bulbs list not processed. Only while in settings menu."
     def bulbs = [:]
-	if (state.inBulbDiscovery) {       
+	if (state.inBulbDiscovery) {
         def logg = ""
         log.trace "Adding bulbs to state..."
         state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)   
+        def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
-            if (v instanceof Map) 
+            if (v instanceof Map)
                 bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
         }
-    }  
+    }
     def bridge = null
-	if (selectedHue) 
+	if (selectedHue)
         bridge = getChildDevice(selectedHue)
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
@@ -318,7 +318,7 @@ def addBulbs() {
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
-			} else { 
+			} else {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
@@ -344,7 +344,7 @@ def addBridge() {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
      		// compatibility with old devices
-            def newbridge = true 
+            def newbridge = true
             childDevices.each {
             	if (it.getDeviceDataByName("mac")) {
                     def newDNI = "${it.getDeviceDataByName("mac")}"
@@ -354,10 +354,10 @@ def addBridge() {
                         it.setDeviceNetworkId("${newDNI}")
                         if (oldDNI == selectedHue)
                         	app.updateSetting("selectedHue", newDNI)
-                        newbridge = false 
+                        newbridge = false
                     }
-                }    
-            }  
+                }
+            }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
@@ -368,13 +368,13 @@ def addBridge() {
                     	childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
                         childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
                     } else {
-                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))	
+                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
                         childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-                    }    
+                    }
 				} else {
 					childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
                     childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
-                }    
+                }
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $selectedHue already exists"
@@ -436,7 +436,7 @@ def locationHandler(evt) {
                     dstate.name = "Philips hue ($ip)"
                     d.sendEvent(name:"networkAddress", value: host)
                     d.updateDataValue("networkAddress", host)
-            	} 
+            	}
             }
 		}
 	}
@@ -504,11 +504,11 @@ def isValidSource(macAddress) {
 /////////////////////////////////////
 
 def parse(childDevice, description) {
-	def parsedEvent = parseLanMessage(description) 
+	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
         def bodyString = parsedEvent.body.toString()
-		if (headerString?.contains("json")) { 
+		if (headerString?.contains("json")) {
         	def body
         	try {
             	body = new groovy.json.JsonSlurper().parseText(bodyString)
@@ -516,11 +516,11 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) { 
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
-                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}    
+                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
                     if (d) {
                         if (bulb.value.state?.reachable) {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
@@ -535,18 +535,18 @@ def parse(childDevice, description) {
                             }
                         } else {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
-                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])                     
+                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])
                             if (bulb.value.state.sat) {
                                 def hue = 23
                                 def sat = 56
                                 def hex = colorUtil.hslToHex(23, 56)
                                 sendEvent(d.deviceNetworkId, [name: "color", value: hex])
                                 sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])                               
-                            }    
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
+                            }
                         }
                     }
-                }     
+                }
             }
             else
             { //put response
@@ -595,7 +595,7 @@ def parse(childDevice, description) {
                 }
 
             }
-    	}        
+    	}
 	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
@@ -616,7 +616,7 @@ def off(childDevice) {
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-    def level 
+    def level
     if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
@@ -633,6 +633,14 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
+def setColorTemperature(childDevice, huesettings) {
+	log.debug "Executing 'setColorTemperature($huesettings)'"
+	def ct = Math.round(Math.abs((huesettings / 12.96829971181556) - 654))
+	def value = [ct: ct, on: true]
+	log.trace "sending command $value"
+	put("lights/${getId(childDevice)}/state", value)
+}
+
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
@@ -689,7 +697,7 @@ HOST: ${host}
 }
 
 private put(path, body) {
-	def host = getBridgeIP()	
+	def host = getBridgeIP()
 	def uri = "/api/${state.username}/$path"
 	def bodyJSON = new groovy.json.JsonBuilder(body).toString()
 	def length = bodyJSON.getBytes().size().toString()
@@ -715,11 +723,11 @@ private getBridgeIP() {
             	host =  d.getDeviceDataByName("networkAddress")
             else
         		host = d.latestState('networkAddress').stringValue
-        }    
+        }
         if (host == null || host == "") {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-            if (!bridge) { 
+            if (!bridge) {
             	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
             }
             if (bridge?.ip && bridge?.port) {
@@ -729,9 +737,9 @@ private getBridgeIP() {
                 	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
             } else if (bridge?.networkAddress && bridge?.deviceAddress)
             	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }    
+        }
         log.trace "Bridge: $selectedHue - Host: $host"
-    }    
+    }
     return host
 }