Merge pull request #599 from SmartThingsCommunity/staging

Rolling up changes to production from staging 2016-03-10 Release

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -1,294 +1,294 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Arrival Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Tone"
-		capability "Actuator"
-		capability "Signal Strength"
-		capability "Presence Sensor"
-		capability "Sensor"
-		capability "Battery"
-
-		fingerprint profileId: "FC01", deviceId: "019A"
-		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
-		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000", outClusters: "0006"
-	}
-
-	simulator {
-		status "present": "presence: 1"
-		status "not present": "presence: 0"
-		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
-				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
-				])
-		}
-	}
-
-	tiles {
-		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
-		}
-		standardTile("beep", "device.beep", decoration: "flat") {
-			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
-				[value: 5, color: "#BC2323"],
-				[value: 10, color: "#D04E00"],
-				[value: 15, color: "#F1D801"],
-				[value: 16, color: "#FFFFFF"]
-			]*/
-		}
-		/*
-		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
-			state "lqi", label:'${currentValue}% signal', unit:""
-		}
-		*/
-		
-		main "presence"
-		details(["presence", "beep", "battery"/*, "lqi"*/])
-	}
-}
-
-def beep() {
-	/*
-	You can make the speaker turn on for 0.5-second beeps by sending some CLI commands:
-
-		Command: send raw, wait 7, send raw, wait 7, send raw
-		Future: new packet type "st.beep"
-
-		raw 0xFC05 {15 0A 11 00 00 15 01}
-		send 0x2F7F 2 2
-
-	where "0xABCD" is the node ID of the Smart Tag, everything else above is a constant. Except
-	the "15 01" at the end of the first raw command, that sets the speaker's period (reciprocal
-	of frequency). You can play with this value up or down to experiment with loudness as the
-	loudness will be strongly dependent upon frequency and the enclosure that it's in. Note that
-	"15 01" represents the hex number 0x0115 so a lower frequency is "16 01" (longer period) and
-	a higher frequency is "14 01" (shorter period). Note that since the tag only checks its parent
-	for messages every 5 seconds (while at rest) or every 3 seconds (while in motion) it will take
-	up to this long from the time you send the message to the time you hear a sound.
-	*/
-
-	[
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
-	]
-}
-
-def parse(String description) {
-	def results
-	if (isBatteryMessage(description)) {
-		results = parseBatteryMessage(description)
-	}
-	else {
-		results = parsePresenceMessage(description)
-	}
-
-	log.debug "Parse returned $results.descriptionText"
-	results
-}
-
-private Map parsePresenceMessage(String description) {
-	def name = parseName(description)
-	def value = parseValue(description)
-	def linkText = getLinkText(device)
-	def descriptionText = parseDescriptionText(linkText, value, description)
-	def handlerName = getState(value)
-	def isStateChange = isStateChange(device, name, value)
-
-	def results = [
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
-
-	results
-}
-
-private String parseName(String description) {
-	if (description?.startsWith("presence: ")) {
-		return "presence"
-	}
-	null
-}
-
-private String parseValue(String description) {
-	if (description?.startsWith("presence: "))
-	{
-		if (description?.endsWith("1"))
-		{
-			return "present"
-		}
-		else if (description?.endsWith("0"))
-		{
-			return "not present"
-		}
-	}
-
-	description
-}
-
-private parseDescriptionText(String linkText, String value, String description) {
-	switch(value) {
-		case "present": return "$linkText has arrived"
-		case "not present": return "$linkText has left"
-		default: return value
-	}
-}
-
-private getState(String value) {
-	def state = value
-	if (value == "present") {
-		state = "arrived"
-	}
-	else if (value == "not present") {
-		state = "left"
-	}
-
-	state
-}
-
-private Boolean isBatteryMessage(String description) {
-	// "raw:36EF1C, dni:36EF, battery:1B, rssi:, lqi:"
-	description ==~ /.*battery:.*rssi:.*lqi:.*/
-}
-
-private List parseBatteryMessage(String description) {
-	def results = []
-	def parts = description.split(',')
-	parts.each { part ->
-		part = part.trim()
-		if (part.startsWith('battery:')) {
-			def batteryResult = getBatteryResult(part, description)
-			if (batteryResult) {
-				results << batteryResult
-			}
-		}
-		else if (part.startsWith('rssi:')) {
-			def rssiResult = getRssiResult(part, description)
-			if (rssiResult) {
-				results << rssiResult
-			}
-		}
-		else if (part.startsWith('lqi:')) {
-			def lqiResult = getLqiResult(part, description)
-			if (lqiResult) {
-				results << lqiResult
-			}
-		}
-	}
-
-	results
-}
-
-private getBatteryResult(part, description) {
-	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
-	def name = "battery"
-	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
-	def unit = "%"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText battery was ${value}${unit}"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: unit,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: name,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
-
-private getRssiResult(part, description) {
-	def name = "rssi"
-	def parts = part.split(":")
-	if (parts.size() != 2) return null
-
-	def valueString = parts[1].trim()
-	def valueInt = Integer.parseInt(valueString, 16)
-	def value = (valueInt - 128).toString()
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value dBm"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: "dBm",
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: null,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
-
-/**
- * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
- * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
- * strength. Return as a percentage of 255.
- *
- * Note: To make the signal strength indicator more accurate, we could combine
- * LQI with RSSI.
- */
-private getLqiResult(part, description) {
-	def name = "lqi"
-	def parts = part.split(":")
-	if (parts.size() != 2) return null
-
-	def valueString = parts[1].trim()
-	def valueInt = Integer.parseInt(valueString, 16)
-	def percentageOf = 255
-	def value = Math.round((valueInt / percentageOf * 100)).toString()
-	def unit = "%"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText Signal (LQI) was ${value}${unit}"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: unit,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: null,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Arrival Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Tone"
+		capability "Actuator"
+		capability "Signal Strength"
+		capability "Presence Sensor"
+		capability "Sensor"
+		capability "Battery"
+
+		fingerprint profileId: "FC01", deviceId: "019A"
+		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
+		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000", outClusters: "0006"
+	}
+
+	simulator {
+		status "present": "presence: 1"
+		status "not present": "presence: 0"
+		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
+				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
+				])
+		}
+	}
+
+	tiles {
+		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
+		}
+		standardTile("beep", "device.beep", decoration: "flat") {
+			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
+				[value: 5, color: "#BC2323"],
+				[value: 10, color: "#D04E00"],
+				[value: 15, color: "#F1D801"],
+				[value: 16, color: "#FFFFFF"]
+			]*/
+		}
+		/*
+		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
+			state "lqi", label:'${currentValue}% signal', unit:""
+		}
+		*/
+		
+		main "presence"
+		details(["presence", "beep", "battery"/*, "lqi"*/])
+	}
+}
+
+def beep() {
+	/*
+	You can make the speaker turn on for 0.5-second beeps by sending some CLI commands:
+
+		Command: send raw, wait 7, send raw, wait 7, send raw
+		Future: new packet type "st.beep"
+
+		raw 0xFC05 {15 0A 11 00 00 15 01}
+		send 0x2F7F 2 2
+
+	where "0xABCD" is the node ID of the Smart Tag, everything else above is a constant. Except
+	the "15 01" at the end of the first raw command, that sets the speaker's period (reciprocal
+	of frequency). You can play with this value up or down to experiment with loudness as the
+	loudness will be strongly dependent upon frequency and the enclosure that it's in. Note that
+	"15 01" represents the hex number 0x0115 so a lower frequency is "16 01" (longer period) and
+	a higher frequency is "14 01" (shorter period). Note that since the tag only checks its parent
+	for messages every 5 seconds (while at rest) or every 3 seconds (while in motion) it will take
+	up to this long from the time you send the message to the time you hear a sound.
+	*/
+
+	[
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 7000",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+	]
+}
+
+def parse(String description) {
+	def results
+	if (isBatteryMessage(description)) {
+		results = parseBatteryMessage(description)
+	}
+	else {
+		results = parsePresenceMessage(description)
+	}
+
+	log.debug "Parse returned $results.descriptionText"
+	results
+}
+
+private Map parsePresenceMessage(String description) {
+	def name = parseName(description)
+	def value = parseValue(description)
+	def linkText = getLinkText(device)
+	def descriptionText = parseDescriptionText(linkText, value, description)
+	def handlerName = getState(value)
+	def isStateChange = isStateChange(device, name, value)
+
+	def results = [
+		name: name,
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	]
+
+	results
+}
+
+private String parseName(String description) {
+	if (description?.startsWith("presence: ")) {
+		return "presence"
+	}
+	null
+}
+
+private String parseValue(String description) {
+	if (description?.startsWith("presence: "))
+	{
+		if (description?.endsWith("1"))
+		{
+			return "present"
+		}
+		else if (description?.endsWith("0"))
+		{
+			return "not present"
+		}
+	}
+
+	description
+}
+
+private parseDescriptionText(String linkText, String value, String description) {
+	switch(value) {
+		case "present": return "$linkText has arrived"
+		case "not present": return "$linkText has left"
+		default: return value
+	}
+}
+
+private getState(String value) {
+	def state = value
+	if (value == "present") {
+		state = "arrived"
+	}
+	else if (value == "not present") {
+		state = "left"
+	}
+
+	state
+}
+
+private Boolean isBatteryMessage(String description) {
+	// "raw:36EF1C, dni:36EF, battery:1B, rssi:, lqi:"
+	description ==~ /.*battery:.*rssi:.*lqi:.*/
+}
+
+private List parseBatteryMessage(String description) {
+	def results = []
+	def parts = description.split(',')
+	parts.each { part ->
+		part = part.trim()
+		if (part.startsWith('battery:')) {
+			def batteryResult = getBatteryResult(part, description)
+			if (batteryResult) {
+				results << batteryResult
+			}
+		}
+		else if (part.startsWith('rssi:')) {
+			def rssiResult = getRssiResult(part, description)
+			if (rssiResult) {
+				results << rssiResult
+			}
+		}
+		else if (part.startsWith('lqi:')) {
+			def lqiResult = getLqiResult(part, description)
+			if (lqiResult) {
+				results << lqiResult
+			}
+		}
+	}
+
+	results
+}
+
+private getBatteryResult(part, description) {
+	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
+	def name = "battery"
+	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText battery was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: name,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}
+
+private getRssiResult(part, description) {
+	def name = "rssi"
+	def parts = part.split(":")
+	if (parts.size() != 2) return null
+
+	def valueString = parts[1].trim()
+	def valueInt = Integer.parseInt(valueString, 16)
+	def value = (valueInt - 128).toString()
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText was $value dBm"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: "dBm",
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}
+
+/**
+ * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
+ * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
+ * strength. Return as a percentage of 255.
+ *
+ * Note: To make the signal strength indicator more accurate, we could combine
+ * LQI with RSSI.
+ */
+private getLqiResult(part, description) {
+	def name = "lqi"
+	def parts = part.split(":")
+	if (parts.size() != 2) return null
+
+	def valueString = parts[1].trim()
+	def valueInt = Integer.parseInt(valueString, 16)
+	def percentageOf = 255
+	def value = Math.round((valueInt / percentageOf * 100)).toString()
+	def unit = "%"
+	def linkText = getLinkText(device)
+	def descriptionText = "$linkText Signal (LQI) was ${value}${unit}"
+	def isStateChange = isStateChange(device, name, value)
+
+	[
+		name: name,
+		value: value,
+		unit: unit,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: null,
+		isStateChange: isStateChange,
+		//displayed: displayed(description, isStateChange)
+		displayed: false
+	]
+}

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -1,7 +1,5 @@
 /**
- *  Ecobee Sensor
- *
- *  Copyright 2015 Juan Risso
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -12,6 +10,9 @@
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
  *  for the specific language governing permissions and limitations under the License.
  *
+ *	Ecobee Sensor
+ *
+ *	Author: SmartThings
  */
 metadata {
 	definition (name: "Ecobee Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -26,7 +27,16 @@ metadata {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
 					backgroundColors:[
-							[value: 31, color: "#153591"],
+							// Celsius
+							[value: 0, color: "#153591"],
+							[value: 7, color: "#1e9cbb"],
+							[value: 15, color: "#90d2a7"],
+							[value: 23, color: "#44b621"],
+							[value: 28, color: "#f1d801"],
+							[value: 35, color: "#d04e00"],
+							[value: 37, color: "#bc2323"],
+							// Fahrenheit
+							[value: 40, color: "#153591"],
 							[value: 44, color: "#1e9cbb"],
 							[value: 59, color: "#90d2a7"],
 							[value: 74, color: "#44b621"],

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -395,7 +395,7 @@ def generateModeEvent(mode) {
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${mode} mode", displayed: true)
+	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -493,7 +493,7 @@ def fanOn() {
 	} else {
 		log.debug "Error setting new mode."
 		def currentFanMode = device.currentState("thermostatFanMode")?.value
-		generateModeEvent(currentFanMode) // reset the tile back
+		generateFanModeEvent(currentFanMode) // reset the tile back
 	}
 }
 
@@ -514,7 +514,7 @@ def fanAuto() {
 	} else {
 		log.debug "Error setting new mode."
 		def currentFanMode = device.currentState("thermostatFanMode")?.value
-		generateModeEvent(currentFanMode) // reset the tile back
+		generateFanModeEvent(currentFanMode) // reset the tile back
 	}
 }
 

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,4 +1,3 @@
-
 /**
  *  Hue Bulb
  *
@@ -11,13 +10,14 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-                command "reset"        
-                command "refresh"
+        command "reset"
+        command "refresh"
 	}
 
 	simulator {
@@ -25,7 +25,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,23 +33,58 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-	}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-	main(["switch"])
-	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
+		main(["switch"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
 }
 
 // parse events into attributes
@@ -68,17 +103,17 @@ def parse(description) {
 }
 
 // handle commands
-def on() {
+void on() {
 	log.trace parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off() {
+void off() {
 	log.trace parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-def nextLevel() {
+void nextLevel() {
 	def level = device.latestValue("level") as Integer ?: 0
 	if (level <= 100) {
 		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
@@ -89,25 +124,25 @@ def nextLevel() {
 	setLevel(level)
 }
 
-def setLevel(percent) {
+void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
 	sendEvent(name: "level", value: percent)
 }
 
-def setSaturation(percent) {
+void setSaturation(percent) {
 	log.debug "Executing 'setSaturation'"
 	parent.setSaturation(this, percent)
 	sendEvent(name: "saturation", value: percent)
 }
 
-def setHue(percent) {
+void setHue(percent) {
 	log.debug "Executing 'setHue'"
 	parent.setHue(this, percent)
 	sendEvent(name: "hue", value: percent)
 }
 
-def setColor(value) {
+void setColor(value) {
 	log.debug "setColor: ${value}, $this"
 	parent.setColor(this, value)
 	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
@@ -117,25 +152,33 @@ def setColor(value) {
 	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
 }
 
-def reset() {
+void reset() {
 	log.debug "Executing 'reset'"
     def value = [level:100, hex:"#90C638", saturation:56, hue:23]
     setAdjustedColor(value)
 	parent.poll()
 }
 
-def setAdjustedColor(value) {
+void setAdjustedColor(value) {
 	if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
         adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
-        adjusted.level = null 
+        adjusted.level = null
         setColor(adjusted)
     }
 }
 
-def refresh() {
+void setColorTemperature(value) {
+	if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
+	}
+}
+
+void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -12,14 +12,14 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
-       
-        command "refresh"       
+
+        command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
-    
+
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -35,25 +35,25 @@ metadata {
 	            attributeState "level", label: 'Level ${currentValue}%'
 			}
         }
-    
+
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
         }
-        
+
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
             state "level", action:"switch level.setLevel"
         }
-           
-        standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }        
+        }
 
         main(["switch"])
         details(["rich-control", "refresh"])
-    }    
+    }
 }
 
 // parse events into attributes
@@ -74,23 +74,23 @@ def parse(description) {
 }
 
 // handle commands
-def on() {
+void on() {
 	parent.on(this)
 	sendEvent(name: "switch", value: "on")
 }
 
-def off() {
+void off() {
 	parent.off(this)
 	sendEvent(name: "switch", value: "off")
 }
 
-def setLevel(percent) {
+void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
 	parent.setLevel(this, percent)
 	sendEvent(name: "level", value: percent)
 }
 
-def refresh() {
+void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -0,0 +1,31 @@
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: Mobile Presence i18n Translation File
+#
+# Filename: mobile-presence.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160205 TW Initial release with informal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Set Device Image'''.ko=디바이스 이미지 설정
+# Events / Notifications
+'''{{ linkText }} has left'''.ko={{ linkText }}님이 나갔습니다
+'''{{ linkText }} has arrived'''.ko={{ linkText }}님이 도착했습니다
+'''present'''.ko=집안
+'''not present'''.ko=부재중

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -0,0 +1,14 @@
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+'''battery'''.ko=배터리
+'''dry'''.ko=건조
+'''wet'''.ko=누수
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
+'''{{ device.displayName }} is {{ value | translate }}'''.ko={{ device.displayName }}이(가) {{ value | translate }}입니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -0,0 +1,13 @@
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+'''battery'''.ko=배터리
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}가 움직임을 감지하였습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }} 동작이 중단되었습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -0,0 +1,20 @@
+
+# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Degrees'''.ko=온도
+'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+'''No'''.ko=아니요
+'''Tap to set'''.ko=눌러서 설정
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
+'''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
+'''Yes'''.ko=예
+'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
+'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }}이(가) 활성화되었습니다
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}이(가) 닫혔습니다
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}이(가) 비활성화되었습니다
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}이(가) 열렸습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -72,15 +72,12 @@ metadata {
 				]
 			)
 		}
-		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
-			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
-		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
 
 		main(["contact", "acceleration", "temperature"])
-		details(["contact", "acceleration", "temperature", "3axis", "battery"])
+		details(["contact", "acceleration", "temperature", "battery"])
 	}
 }
 

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -23,22 +23,14 @@
         capability "Battery"
         capability "Configuration"
 
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10", deviceJoinName: "Kwikset 10-Button Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10", deviceJoinName: "Kwikset 10-Button Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale Touch Screen Lever Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
     }
 
     tiles(scale: 2) {

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -1,322 +1,322 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	Button Controller
- *
- *	Author: SmartThings
- *	Date: 2014-5-21
- */
-definition(
-    name: "Button Controller",
-    namespace: "smartthings",
-    author: "SmartThings",
-    description: "Control devices with buttons like the Aeon Labs Minimote",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/MyApps/Cat-MyApps.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/MyApps/Cat-MyApps@2x.png"
-)
-
-preferences {
-	page(name: "selectButton")
-	page(name: "configureButton1")
-	page(name: "configureButton2")
-	page(name: "configureButton3")
-	page(name: "configureButton4")
-
-	page(name: "timeIntervalInput", title: "Only during a certain time") {
-		section {
-			input "starting", "time", title: "Starting", required: false
-			input "ending", "time", title: "Ending", required: false
-		}
-	}
-}
-
-def selectButton() {
-	dynamicPage(name: "selectButton", title: "First, select your button device", nextPage: "configureButton1", uninstall: configured()) {
-		section {
-			input "buttonDevice", "capability.button", title: "Button", multiple: false, required: true
-		}
-
-		section(title: "More options", hidden: hideOptionsSection(), hideable: true) {
-
-			def timeLabel = timeIntervalLabel()
-
-			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : null
-
-			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
-				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
-
-			input "modes", "mode", title: "Only when mode is", multiple: true, required: false
-		}
-	}
-}
-
-def configureButton1() {
-	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
-		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
-}
-def configureButton2() {
-	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
-		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
-}
-
-def configureButton3() {
-	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
-		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
-}
-def configureButton4() {
-	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
-		install: true, uninstall: true, getButtonSections(4))
-}
-
-def getButtonSections(buttonNumber) {
-	return {
-		section("Lights") {
-			input "lights_${buttonNumber}_pushed", "capability.switch", title: "Pushed", multiple: true, required: false
-			input "lights_${buttonNumber}_held", "capability.switch", title: "Held", multiple: true, required: false
-		}
-		section("Locks") {
-			input "locks_${buttonNumber}_pushed", "capability.lock", title: "Pushed", multiple: true, required: false
-			input "locks_${buttonNumber}_held", "capability.lock", title: "Held", multiple: true, required: false
-		}
-		section("Sonos") {
-			input "sonos_${buttonNumber}_pushed", "capability.musicPlayer", title: "Pushed", multiple: true, required: false
-			input "sonos_${buttonNumber}_held", "capability.musicPlayer", title: "Held", multiple: true, required: false
-		}
-		section("Modes") {
-			input "mode_${buttonNumber}_pushed", "mode", title: "Pushed", required: false
-			input "mode_${buttonNumber}_held", "mode", title: "Held", required: false
-		}
-		def phrases = location.helloHome?.getPhrases()*.label
-		if (phrases) {
-			section("Hello Home Actions") {
-				log.trace phrases
-				input "phrase_${buttonNumber}_pushed", "enum", title: "Pushed", required: false, options: phrases
-				input "phrase_${buttonNumber}_held", "enum", title: "Held", required: false, options: phrases
-			}
-		}
-        section("Sirens") {
-            input "sirens_${buttonNumber}_pushed","capability.alarm" ,title: "Pushed", multiple: true, required: false
-            input "sirens_${buttonNumber}_held", "capability.alarm", title: "Held", multiple: true, required: false
-        }
-
-		section("Custom Message") {
-			input "textMessage_${buttonNumber}", "text", title: "Message", required: false
-		}
-
-        section("Push Notifications") {
-            input "notifications_${buttonNumber}_pushed","bool" ,title: "Pushed", required: false, defaultValue: false
-            input "notifications_${buttonNumber}_held", "bool", title: "Held", required: false, defaultValue: false
-        }
-
-        section("Sms Notifications") {
-            input "phone_${buttonNumber}_pushed","phone" ,title: "Pushed", required: false
-            input "phone_${buttonNumber}_held", "phone", title: "Held", required: false
-        }
-	}
-}
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	subscribe(buttonDevice, "button", buttonEvent)
-}
-
-def configured() {
-	return buttonDevice || buttonConfigured(1) || buttonConfigured(2) || buttonConfigured(3) || buttonConfigured(4)
-}
-
-def buttonConfigured(idx) {
-	return settings["lights_$idx_pushed"] ||
-		settings["locks_$idx_pushed"] ||
-		settings["sonos_$idx_pushed"] ||
-		settings["mode_$idx_pushed"] ||
-        settings["notifications_$idx_pushed"] ||
-        settings["sirens_$idx_pushed"] ||
-        settings["notifications_$idx_pushed"]   ||
-        settings["phone_$idx_pushed"]
-}
-
-def buttonEvent(evt){
-	if(allOk) {
-		def buttonNumber = evt.data // why doesn't jsonData work? always returning [:]
-		def value = evt.value
-		log.debug "buttonEvent: $evt.name = $evt.value ($evt.data)"
-		log.debug "button: $buttonNumber, value: $value"
-
-		def recentEvents = buttonDevice.eventsSince(new Date(now() - 3000)).findAll{it.value == evt.value && it.data == evt.data}
-		log.debug "Found ${recentEvents.size()?:0} events in past 3 seconds"
-
-		if(recentEvents.size <= 1){
-			switch(buttonNumber) {
-				case ~/.*1.*/:
-					executeHandlers(1, value)
-					break
-				case ~/.*2.*/:
-					executeHandlers(2, value)
-					break
-				case ~/.*3.*/:
-					executeHandlers(3, value)
-					break
-				case ~/.*4.*/:
-					executeHandlers(4, value)
-					break
-			}
-		} else {
-			log.debug "Found recent button press events for $buttonNumber with value $value"
-		}
-	}
-}
-
-def executeHandlers(buttonNumber, value) {
-	log.debug "executeHandlers: $buttonNumber - $value"
-
-	def lights = find('lights', buttonNumber, value)
-	if (lights != null) toggle(lights)
-
-	def locks = find('locks', buttonNumber, value)
-	if (locks != null) toggle(locks)
-
-	def sonos = find('sonos', buttonNumber, value)
-	if (sonos != null) toggle(sonos)
-
-	def mode = find('mode', buttonNumber, value)
-	if (mode != null) changeMode(mode)
-
-	def phrase = find('phrase', buttonNumber, value)
-	if (phrase != null) location.helloHome.execute(phrase)
-
-	def textMessage = findMsg('textMessage', buttonNumber)
-
-	def notifications = find('notifications', buttonNumber, value)
-	if (notifications?.toBoolean()) sendPush(textMessage ?: "Button $buttonNumber was pressed" )
-
-	def phone = find('phone', buttonNumber, value)
-	if (phone != null) sendSms(phone, textMessage ?:"Button $buttonNumber was pressed")
-
-    def sirens = find('sirens', buttonNumber, value)
-    if (sirens != null) toggle(sirens)
-}
-
-def find(type, buttonNumber, value) {
-	def preferenceName = type + "_" + buttonNumber + "_" + value
-	def pref = settings[preferenceName]
-	if(pref != null) {
-		log.debug "Found: $pref for $preferenceName"
-	}
-
-	return pref
-}
-
-def findMsg(type, buttonNumber) {
-	def preferenceName = type + "_" + buttonNumber
-	def pref = settings[preferenceName]
-	if(pref != null) {
-		log.debug "Found: $pref for $preferenceName"
-	}
-
-	return pref
-}
-
-def toggle(devices) {
-	log.debug "toggle: $devices = ${devices*.currentValue('switch')}"
-
-	if (devices*.currentValue('switch').contains('on')) {
-		devices.off()
-	}
-	else if (devices*.currentValue('switch').contains('off')) {
-		devices.on()
-	}
-	else if (devices*.currentValue('lock').contains('locked')) {
-		devices.unlock()
-	}
-	else if (devices*.currentValue('lock').contains('unlocked')) {
-		devices.lock()
-	}
-	else if (devices*.currentValue('alarm').contains('off')) {
-        devices.siren()
-    }
-	else {
-		devices.on()
-	}
-}
-
-def changeMode(mode) {
-	log.debug "changeMode: $mode, location.mode = $location.mode, location.modes = $location.modes"
-
-	if (location.mode != mode && location.modes?.find { it.name == mode }) {
-		setLocationMode(mode)
-	}
-}
-
-// execution filter methods
-private getAllOk() {
-	modeOk && daysOk && timeOk
-}
-
-private getModeOk() {
-	def result = !modes || modes.contains(location.mode)
-	log.trace "modeOk = $result"
-	result
-}
-
-private getDaysOk() {
-	def result = true
-	if (days) {
-		def df = new java.text.SimpleDateFormat("EEEE")
-		if (location.timeZone) {
-			df.setTimeZone(location.timeZone)
-		}
-		else {
-			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-		}
-		def day = df.format(new Date())
-		result = days.contains(day)
-	}
-	log.trace "daysOk = $result"
-	result
-}
-
-private getTimeOk() {
-	def result = true
-	if (starting && ending) {
-		def currTime = now()
-		def start = timeToday(starting).time
-		def stop = timeToday(ending).time
-		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
-	}
-	log.trace "timeOk = $result"
-	result
-}
-
-private hhmm(time, fmt = "h:mm a")
-{
-	def t = timeToday(time, location.timeZone)
-	def f = new java.text.SimpleDateFormat(fmt)
-	f.setTimeZone(location.timeZone ?: timeZone(time))
-	f.format(t)
-}
-
-private hideOptionsSection() {
-	(starting || ending || days || modes) ? false : true
-}
-
-private timeIntervalLabel() {
-	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
-}
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Button Controller
+ *
+ *	Author: SmartThings
+ *	Date: 2014-5-21
+ */
+definition(
+    name: "Button Controller",
+    namespace: "smartthings",
+    author: "SmartThings",
+    description: "Control devices with buttons like the Aeon Labs Minimote",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/MyApps/Cat-MyApps.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/MyApps/Cat-MyApps@2x.png"
+)
+
+preferences {
+	page(name: "selectButton")
+	page(name: "configureButton1")
+	page(name: "configureButton2")
+	page(name: "configureButton3")
+	page(name: "configureButton4")
+
+	page(name: "timeIntervalInput", title: "Only during a certain time") {
+		section {
+			input "starting", "time", title: "Starting", required: false
+			input "ending", "time", title: "Ending", required: false
+		}
+	}
+}
+
+def selectButton() {
+	dynamicPage(name: "selectButton", title: "First, select your button device", nextPage: "configureButton1", uninstall: configured()) {
+		section {
+			input "buttonDevice", "capability.button", title: "Button", multiple: false, required: true
+		}
+
+		section(title: "More options", hidden: hideOptionsSection(), hideable: true) {
+
+			def timeLabel = timeIntervalLabel()
+
+			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : null
+
+			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+
+			input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+		}
+	}
+}
+
+def configureButton1() {
+	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
+		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
+}
+def configureButton2() {
+	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
+		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
+}
+
+def configureButton3() {
+	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
+		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
+}
+def configureButton4() {
+	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
+		install: true, uninstall: true, getButtonSections(4))
+}
+
+def getButtonSections(buttonNumber) {
+	return {
+		section("Lights") {
+			input "lights_${buttonNumber}_pushed", "capability.switch", title: "Pushed", multiple: true, required: false
+			input "lights_${buttonNumber}_held", "capability.switch", title: "Held", multiple: true, required: false
+		}
+		section("Locks") {
+			input "locks_${buttonNumber}_pushed", "capability.lock", title: "Pushed", multiple: true, required: false
+			input "locks_${buttonNumber}_held", "capability.lock", title: "Held", multiple: true, required: false
+		}
+		section("Sonos") {
+			input "sonos_${buttonNumber}_pushed", "capability.musicPlayer", title: "Pushed", multiple: true, required: false
+			input "sonos_${buttonNumber}_held", "capability.musicPlayer", title: "Held", multiple: true, required: false
+		}
+		section("Modes") {
+			input "mode_${buttonNumber}_pushed", "mode", title: "Pushed", required: false
+			input "mode_${buttonNumber}_held", "mode", title: "Held", required: false
+		}
+		def phrases = location.helloHome?.getPhrases()*.label
+		if (phrases) {
+			section("Hello Home Actions") {
+				log.trace phrases
+				input "phrase_${buttonNumber}_pushed", "enum", title: "Pushed", required: false, options: phrases
+				input "phrase_${buttonNumber}_held", "enum", title: "Held", required: false, options: phrases
+			}
+		}
+        section("Sirens") {
+            input "sirens_${buttonNumber}_pushed","capability.alarm" ,title: "Pushed", multiple: true, required: false
+            input "sirens_${buttonNumber}_held", "capability.alarm", title: "Held", multiple: true, required: false
+        }
+
+		section("Custom Message") {
+			input "textMessage_${buttonNumber}", "text", title: "Message", required: false
+		}
+
+        section("Push Notifications") {
+            input "notifications_${buttonNumber}_pushed","bool" ,title: "Pushed", required: false, defaultValue: false
+            input "notifications_${buttonNumber}_held", "bool", title: "Held", required: false, defaultValue: false
+        }
+
+        section("Sms Notifications") {
+            input "phone_${buttonNumber}_pushed","phone" ,title: "Pushed", required: false
+            input "phone_${buttonNumber}_held", "phone", title: "Held", required: false
+        }
+	}
+}
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(buttonDevice, "button", buttonEvent)
+}
+
+def configured() {
+	return buttonDevice || buttonConfigured(1) || buttonConfigured(2) || buttonConfigured(3) || buttonConfigured(4)
+}
+
+def buttonConfigured(idx) {
+	return settings["lights_$idx_pushed"] ||
+		settings["locks_$idx_pushed"] ||
+		settings["sonos_$idx_pushed"] ||
+		settings["mode_$idx_pushed"] ||
+        settings["notifications_$idx_pushed"] ||
+        settings["sirens_$idx_pushed"] ||
+        settings["notifications_$idx_pushed"]   ||
+        settings["phone_$idx_pushed"]
+}
+
+def buttonEvent(evt){
+	if(allOk) {
+		def buttonNumber = evt.data // why doesn't jsonData work? always returning [:]
+		def value = evt.value
+		log.debug "buttonEvent: $evt.name = $evt.value ($evt.data)"
+		log.debug "button: $buttonNumber, value: $value"
+
+		def recentEvents = buttonDevice.eventsSince(new Date(now() - 3000)).findAll{it.value == evt.value && it.data == evt.data}
+		log.debug "Found ${recentEvents.size()?:0} events in past 3 seconds"
+
+		if(recentEvents.size <= 1){
+			switch(buttonNumber) {
+				case ~/.*1.*/:
+					executeHandlers(1, value)
+					break
+				case ~/.*2.*/:
+					executeHandlers(2, value)
+					break
+				case ~/.*3.*/:
+					executeHandlers(3, value)
+					break
+				case ~/.*4.*/:
+					executeHandlers(4, value)
+					break
+			}
+		} else {
+			log.debug "Found recent button press events for $buttonNumber with value $value"
+		}
+	}
+}
+
+def executeHandlers(buttonNumber, value) {
+	log.debug "executeHandlers: $buttonNumber - $value"
+
+	def lights = find('lights', buttonNumber, value)
+	if (lights != null) toggle(lights)
+
+	def locks = find('locks', buttonNumber, value)
+	if (locks != null) toggle(locks)
+
+	def sonos = find('sonos', buttonNumber, value)
+	if (sonos != null) toggle(sonos)
+
+	def mode = find('mode', buttonNumber, value)
+	if (mode != null) changeMode(mode)
+
+	def phrase = find('phrase', buttonNumber, value)
+	if (phrase != null) location.helloHome.execute(phrase)
+
+	def textMessage = findMsg('textMessage', buttonNumber)
+
+	def notifications = find('notifications', buttonNumber, value)
+	if (notifications?.toBoolean()) sendPush(textMessage ?: "Button $buttonNumber was pressed" )
+
+	def phone = find('phone', buttonNumber, value)
+	if (phone != null) sendSms(phone, textMessage ?:"Button $buttonNumber was pressed")
+
+    def sirens = find('sirens', buttonNumber, value)
+    if (sirens != null) toggle(sirens)
+}
+
+def find(type, buttonNumber, value) {
+	def preferenceName = type + "_" + buttonNumber + "_" + value
+	def pref = settings[preferenceName]
+	if(pref != null) {
+		log.debug "Found: $pref for $preferenceName"
+	}
+
+	return pref
+}
+
+def findMsg(type, buttonNumber) {
+	def preferenceName = type + "_" + buttonNumber
+	def pref = settings[preferenceName]
+	if(pref != null) {
+		log.debug "Found: $pref for $preferenceName"
+	}
+
+	return pref
+}
+
+def toggle(devices) {
+	log.debug "toggle: $devices = ${devices*.currentValue('switch')}"
+
+	if (devices*.currentValue('switch').contains('on')) {
+		devices.off()
+	}
+	else if (devices*.currentValue('switch').contains('off')) {
+		devices.on()
+	}
+	else if (devices*.currentValue('lock').contains('locked')) {
+		devices.unlock()
+	}
+	else if (devices*.currentValue('lock').contains('unlocked')) {
+		devices.lock()
+	}
+	else if (devices*.currentValue('alarm').contains('off')) {
+        devices.siren()
+    }
+	else {
+		devices.on()
+	}
+}
+
+def changeMode(mode) {
+	log.debug "changeMode: $mode, location.mode = $location.mode, location.modes = $location.modes"
+
+	if (location.mode != mode && location.modes?.find { it.name == mode }) {
+		setLocationMode(mode)
+	}
+}
+
+// execution filter methods
+private getAllOk() {
+	modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+	def result = !modes || modes.contains(location.mode)
+	log.trace "modeOk = $result"
+	result
+}
+
+private getDaysOk() {
+	def result = true
+	if (days) {
+		def df = new java.text.SimpleDateFormat("EEEE")
+		if (location.timeZone) {
+			df.setTimeZone(location.timeZone)
+		}
+		else {
+			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+		}
+		def day = df.format(new Date())
+		result = days.contains(day)
+	}
+	log.trace "daysOk = $result"
+	result
+}
+
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private hhmm(time, fmt = "h:mm a")
+{
+	def t = timeToday(time, location.timeZone)
+	def f = new java.text.SimpleDateFormat(fmt)
+	f.setTimeZone(location.timeZone ?: timeZone(time))
+	f.format(t)
+}
+
+private hideOptionsSection() {
+	(starting || ending || days || modes) ? false : true
+}
+
+private timeIntervalLabel() {
+	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
+}

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -235,6 +235,7 @@ def connectionStatus(message, redirectUrl = null) {
 
 def getEcobeeThermostats() {
 	log.debug "getting device list"
+	atomicState.remoteSensors = []
 
 	def requestBody = '{"selection":{"selectionType":"registered","selectionMatch":"","includeRuntime":true,"includeSensors":true}}'
 
@@ -251,7 +252,7 @@ def getEcobeeThermostats() {
 
 			if (resp.status == 200) {
 				resp.data.thermostatList.each { stat ->
-					atomicState.remoteSensors = stat.remoteSensors
+					atomicState.remoteSensors = atomicState.remoteSensors == null ? stat.remoteSensors : atomicState.remoteSensors <<  stat.remoteSensors
 					def dni = [app.id, stat.identifier].join('.')
 					stats[dni] = getThermostatDisplayName(stat)
 				}
@@ -273,11 +274,14 @@ def getEcobeeThermostats() {
 
 Map sensorsDiscovered() {
 	def map = [:]
-	atomicState.remoteSensors.each {
-		if (it.type != "thermostat") {
-			def value = "${it?.name}"
-			def key = "ecobee_sensor-"+ it?.id + "-" + it?.code
-			map["${key}"] = value
+	log.info "list ${atomicState.remoteSensors}"
+	atomicState.remoteSensors.each { sensors ->
+		sensors.each {
+			if (it.type != "thermostat") {
+				def value = "${it?.name}"
+				def key = "ecobee_sensor-"+ it?.id + "-" + it?.code
+				map["${key}"] = value
+			}
 		}
 	}
 	atomicState.sensors = map

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,7 +15,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Hue (Connect)",
 	namespace: "smartthings",
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -58,7 +58,7 @@ def bridgeDiscovery(params=[:])
     	state.bridges = [:]
         state.bridgeRefreshCount = 0
         app.updateSetting("selectedHue", "")
-    }    
+    }
 
 	subscribe(location, null, locationHandler, [filterEvents:false])
 
@@ -130,8 +130,8 @@ def bulbDiscovery() {
 	def bulboptions = bulbsDiscovered() ?: [:]
 	def numFound = bulboptions.size() ?: 0
     if (numFound == 0)
-    	app.updateSetting("selectedBulbs", "") 
-        
+    	app.updateSetting("selectedBulbs", "")
+
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
@@ -140,7 +140,7 @@ def bulbDiscovery() {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
-		section {				
+		section {
 			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
@@ -246,13 +246,13 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
-	unsubscribe() 
-    unschedule()    
+	unsubscribe()
+    unschedule()
 	initialize()
 }
 
 def initialize() {
-	log.debug "Initializing"  
+	log.debug "Initializing"
     unsubscribe(bridge)
     state.inBulbDiscovery = false
     state.bridgeRefreshCount = 0
@@ -281,18 +281,18 @@ def uninstalled(){
 def bulbListHandler(hub, data = "") {
 	def msg = "Bulbs list not processed. Only while in settings menu."
     def bulbs = [:]
-	if (state.inBulbDiscovery) {       
+	if (state.inBulbDiscovery) {
         def logg = ""
         log.trace "Adding bulbs to state..."
         state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)   
+        def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
-            if (v instanceof Map) 
+            if (v instanceof Map)
                 bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
         }
-    }  
+    }
     def bridge = null
-	if (selectedHue) 
+	if (selectedHue)
         bridge = getChildDevice(selectedHue)
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
@@ -318,7 +318,7 @@ def addBulbs() {
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
-			} else { 
+			} else {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
@@ -344,7 +344,7 @@ def addBridge() {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
      		// compatibility with old devices
-            def newbridge = true 
+            def newbridge = true
             childDevices.each {
             	if (it.getDeviceDataByName("mac")) {
                     def newDNI = "${it.getDeviceDataByName("mac")}"
@@ -354,10 +354,10 @@ def addBridge() {
                         it.setDeviceNetworkId("${newDNI}")
                         if (oldDNI == selectedHue)
                         	app.updateSetting("selectedHue", newDNI)
-                        newbridge = false 
+                        newbridge = false
                     }
-                }    
-            }  
+                }
+            }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
@@ -368,13 +368,13 @@ def addBridge() {
                     	childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
                         childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
                     } else {
-                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))	
+                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
                         childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-                    }    
+                    }
 				} else {
 					childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
                     childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
-                }    
+                }
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $selectedHue already exists"
@@ -436,7 +436,7 @@ def locationHandler(evt) {
                     dstate.name = "Philips hue ($ip)"
                     d.sendEvent(name:"networkAddress", value: host)
                     d.updateDataValue("networkAddress", host)
-            	} 
+            	}
             }
 		}
 	}
@@ -455,7 +455,7 @@ def locationHandler(evt) {
 					log.error "/description.xml returned a bridge that didn't exist"
 				}
 			}
-		} else if(headerString?.contains("json")) {
+		} else if(headerString?.contains("json") && isValidSource(parsedEvent.mac)) {
             log.trace "description.xml response (application/json)"
 			def body = new groovy.json.JsonSlurper().parseText(parsedEvent.body)
 			if (body.success != null) {
@@ -494,16 +494,21 @@ def doDeviceSync(){
 	discoverBridges()
 }
 
+def isValidSource(macAddress) {
+	def vbridges = getVerifiedHueBridges()
+	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
 
 def parse(childDevice, description) {
-	def parsedEvent = parseLanMessage(description) 
+	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
         def bodyString = parsedEvent.body.toString()
-		if (headerString?.contains("json")) { 
+		if (headerString?.contains("json")) {
         	def body
         	try {
             	body = new groovy.json.JsonSlurper().parseText(bodyString)
@@ -511,11 +516,11 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) { 
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
-                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}    
+                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
                     if (d) {
                         if (bulb.value.state?.reachable) {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
@@ -530,18 +535,18 @@ def parse(childDevice, description) {
                             }
                         } else {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
-                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])                     
+                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])
                             if (bulb.value.state.sat) {
                                 def hue = 23
                                 def sat = 56
                                 def hex = colorUtil.hslToHex(23, 56)
                                 sendEvent(d.deviceNetworkId, [name: "color", value: hex])
                                 sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])                               
-                            }    
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
+                            }
                         }
                     }
-                }     
+                }
             }
             else
             { //put response
@@ -590,7 +595,7 @@ def parse(childDevice, description) {
                 }
 
             }
-    	}        
+    	}
 	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
@@ -611,7 +616,7 @@ def off(childDevice) {
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-    def level 
+    def level
     if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
@@ -628,6 +633,14 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
+def setColorTemperature(childDevice, huesettings) {
+	log.debug "Executing 'setColorTemperature($huesettings)'"
+	def ct = Math.round(Math.abs((huesettings / 12.96829971181556) - 654))
+	def value = [ct: ct, on: true]
+	log.trace "sending command $value"
+	put("lights/${getId(childDevice)}/state", value)
+}
+
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
@@ -684,7 +697,7 @@ HOST: ${host}
 }
 
 private put(path, body) {
-	def host = getBridgeIP()	
+	def host = getBridgeIP()
 	def uri = "/api/${state.username}/$path"
 	def bodyJSON = new groovy.json.JsonBuilder(body).toString()
 	def length = bodyJSON.getBytes().size().toString()
@@ -710,11 +723,11 @@ private getBridgeIP() {
             	host =  d.getDeviceDataByName("networkAddress")
             else
         		host = d.latestState('networkAddress').stringValue
-        }    
+        }
         if (host == null || host == "") {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-            if (!bridge) { 
+            if (!bridge) {
             	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
             }
             if (bridge?.ip && bridge?.port) {
@@ -724,9 +737,9 @@ private getBridgeIP() {
                 	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
             } else if (bridge?.networkAddress && bridge?.deviceAddress)
             	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }    
+        }
         log.trace "Bridge: $selectedHue - Host: $host"
-    }    
+    }
     return host
 }