MSA-1227: Enable your SmartThings the voice notifications & knows whose coming & leaving.

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.7"
     }
     repositories {
         mavenLocal()

devicetypes/smartthings/test-arrival-sensor.src/test-arrival-sensor.groovy

@@ -1,294 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Test Arrival Sensor", namespace: "smartthings", author: "Mr.kim") {
-		capability "Tone"
-		capability "Actuator"
-		capability "Signal Strength"
-		capability "Presence Sensor"
-		capability "Sensor"
-		capability "Battery"
-
-		fingerprint profileId: "FC01", deviceId: "019A"
-		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
-		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000", outClusters: "0006"
-	}
-
-	simulator {
-		status "present": "presence: 1"
-		status "not present": "presence: 0"
-		status "battery": "battery: 27, batteryDivisor: 0A, rssi: 100, lqi: 64"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Arrival/Arrival1.jpg",
-				"http://cdn.device-gse.smartthings.com/Arrival/Arrival2.jpg"
-				])
-		}
-	}
-
-	tiles {
-		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
-		}
-		standardTile("beep", "device.beep", decoration: "flat") {
-			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
-			state "battery", label:'${currentValue}% battery', unit:""/*, backgroundColors:[
-				[value: 5, color: "#BC2323"],
-				[value: 10, color: "#D04E00"],
-				[value: 15, color: "#F1D801"],
-				[value: 16, color: "#FFFFFF"]
-			]*/
-		}
-		/*
-		valueTile("lqi", "device.lqi", decoration: "flat", inactiveLabel: false) {
-			state "lqi", label:'${currentValue}% signal', unit:""
-		}
-		*/
-		
-		main "presence"
-		details(["presence", "beep", "battery"/*, "lqi"*/])
-	}
-}
-
-def beep() {
-	/*
-	You can make the speaker turn on for 0.5-second beeps by sending some CLI commands:
-
-		Command: send raw, wait 7, send raw, wait 7, send raw
-		Future: new packet type "st.beep"
-
-		raw 0xFC05 {15 0A 11 00 00 15 01}
-		send 0x2F7F 2 2
-
-	where "0xABCD" is the node ID of the Smart Tag, everything else above is a constant. Except
-	the "15 01" at the end of the first raw command, that sets the speaker's period (reciprocal
-	of frequency). You can play with this value up or down to experiment with loudness as the
-	loudness will be strongly dependent upon frequency and the enclosure that it's in. Note that
-	"15 01" represents the hex number 0x0115 so a lower frequency is "16 01" (longer period) and
-	a higher frequency is "14 01" (shorter period). Note that since the tag only checks its parent
-	for messages every 5 seconds (while at rest) or every 3 seconds (while in motion) it will take
-	up to this long from the time you send the message to the time you hear a sound.
-	*/
-
-	[
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
-	]
-}
-
-def parse(String description) {
-	def results
-	if (isBatteryMessage(description)) {
-		results = parseBatteryMessage(description)
-	}
-	else {
-		results = parsePresenceMessage(description)
-	}
-
-	log.debug "Parse returned $results.descriptionText"
-	results
-}
-
-private Map parsePresenceMessage(String description) {
-	def name = parseName(description)
-	def value = parseValue(description)
-	def linkText = getLinkText(device)
-	def descriptionText = parseDescriptionText(linkText, value, description)
-	def handlerName = getState(value)
-	def isStateChange = isStateChange(device, name, value)
-
-	def results = [
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
-
-	results
-}
-
-private String parseName(String description) {
-	if (description?.startsWith("presence: ")) {
-		return "presence"
-	}
-	null
-}
-
-private String parseValue(String description) {
-	if (description?.startsWith("presence: "))
-	{
-		if (description?.endsWith("1"))
-		{
-			return "present"
-		}
-		else if (description?.endsWith("0"))
-		{
-			return "not present"
-		}
-	}
-
-	description
-}
-
-private parseDescriptionText(String linkText, String value, String description) {
-	switch(value) {
-		case "present": return "$linkText has arrived"
-		case "not present": return "$linkText has left"
-		default: return value
-	}
-}
-
-private getState(String value) {
-	def state = value
-	if (value == "present") {
-		state = "arrived"
-	}
-	else if (value == "not present") {
-		state = "left"
-	}
-
-	state
-}
-
-private Boolean isBatteryMessage(String description) {
-	// "raw:36EF1C, dni:36EF, battery:1B, rssi:, lqi:"
-	description ==~ /.*battery:.*rssi:.*lqi:.*/
-}
-
-private List parseBatteryMessage(String description) {
-	def results = []
-	def parts = description.split(',')
-	parts.each { part ->
-		part = part.trim()
-		if (part.startsWith('battery:')) {
-			def batteryResult = getBatteryResult(part, description)
-			if (batteryResult) {
-				results << batteryResult
-			}
-		}
-		else if (part.startsWith('rssi:')) {
-			def rssiResult = getRssiResult(part, description)
-			if (rssiResult) {
-				results << rssiResult
-			}
-		}
-		else if (part.startsWith('lqi:')) {
-			def lqiResult = getLqiResult(part, description)
-			if (lqiResult) {
-				results << lqiResult
-			}
-		}
-	}
-
-	results
-}
-
-private getBatteryResult(part, description) {
-	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
-	def name = "battery"
-	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
-	def unit = "%"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText battery was ${value}${unit}"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: unit,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: name,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
-
-private getRssiResult(part, description) {
-	def name = "rssi"
-	def parts = part.split(":")
-	if (parts.size() != 2) return null
-
-	def valueString = parts[1].trim()
-	def valueInt = Integer.parseInt(valueString, 16)
-	def value = (valueInt - 128).toString()
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value dBm"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: "dBm",
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: null,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}
-
-/**
- * Use LQI (Link Quality Indicator) as a measure of signal strength. The values
- * are 0 to 255 (0x00 to 0xFF) and higher values represent higher signal
- * strength. Return as a percentage of 255.
- *
- * Note: To make the signal strength indicator more accurate, we could combine
- * LQI with RSSI.
- */
-private getLqiResult(part, description) {
-	def name = "lqi"
-	def parts = part.split(":")
-	if (parts.size() != 2) return null
-
-	def valueString = parts[1].trim()
-	def valueInt = Integer.parseInt(valueString, 16)
-	def percentageOf = 255
-	def value = Math.round((valueInt / percentageOf * 100)).toString()
-	def unit = "%"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText Signal (LQI) was ${value}${unit}"
-	def isStateChange = isStateChange(device, name, value)
-
-	[
-		name: name,
-		value: value,
-		unit: unit,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: null,
-		isStateChange: isStateChange,
-		//displayed: displayed(description, isStateChange)
-		displayed: false
-	]
-}

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -80,31 +80,19 @@ metadata {
 			state "default", label:''
 		}
 
-		// multi-line text (explicit newlines)
-		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
-			state "default", label: '${currentValue}'
-		}
-
-		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
-			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
-		}
-
-		main("actionRings")
+		main("standard1")
 		details([
 			"actionRings", "actionFlat", "noActionFlat",
 
 			"flatLabel", "flatIconLabel", "flatIcon",
 
 			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
-
-			"multiLine", "multiLineWithIcon"
 		])
 	}
 }
 
 def installed() {
 	sendEvent(name: "switch", value: "off")
-	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -69,25 +69,16 @@ metadata {
 			]
 		}
 
-		valueTile("noValue", "device.nada", width: 4, height: 2) {
+		valueTile("noValue", "device.nada", width: 2, height: 2) {
 			state "default", label:'${currentValue}'
 		}
 
-		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
-			state "default", label: '${currentValue}'
-		}
-
-		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
-			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
-		}
-
 		main("text")
 		details([
 			"text", "longText", "integer", 
             "integerFloat", "pi", "floatAsText",
             "bgColor", "bgColorRange", "bgColorRangeSingleItem",
-            "bgColorRangeConflict", "noValue",
-            "multiLine", "multiLineWithIcon"
+            "bgColorRangeConflict", "noValue"
 		])
 	}
 }
@@ -99,7 +90,6 @@ def installed() {
 	sendEvent(name: "integerFloat", value: 47.0)
 	sendEvent(name: "pi", value: 3.14159)
 	sendEvent(name: "floatAsText", value: "3.14159")
-	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -67,47 +67,14 @@ metadata {
 				attributeState "VALUE_DOWN", action: "levelDown"
 			}
 		}
-		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
-			}
-			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
-			}
-		}
-		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
-			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
-			}
-			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
-			}
-		}
-		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
-			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-		}
-		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
-			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
-				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
-			}
-		}
 
 		main(["basicTile"])
-		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
+		details(["basicTile", "sliderTile", "valueTile"])
 	}
 }
 
 def installed() {
-	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
-	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
+
 }
 
 def parse() {

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -25,10 +25,7 @@ metadata {
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
 		fingerprint deviceId: "0x07", inClusters: "0x30"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -243,7 +240,7 @@ def batteryGetCommand() {
 def retypeBasedOnMSR() {
 	switch (state.MSR) {
 		case "0086-0002-002D":
-			log.debug "Changing device type to Z-Wave Water Sensor"
+			log.debug("Changing device type to Z-Wave Water Sensor")
 			setDeviceType("Z-Wave Water Sensor")
 			break
 		case "011F-0001-0001":  // Schlage motion
@@ -252,16 +249,9 @@ def retypeBasedOnMSR() {
 		case "0060-0001-0002":  // Everspring SP814
 		case "0060-0001-0003":  // Everspring HSP02
 		case "011A-0601-0901":  // Enerwave ZWN-BPC
-			log.debug "Changing device type to Z-Wave Motion Sensor"
+			log.debug("Changing device type to Z-Wave Motion Sensor")
 			setDeviceType("Z-Wave Motion Sensor")
 			break
-		case "013C-0002-000D":  // Philio multi +
-			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
-			setDeviceType("3-in-1 Multisensor Plus (SG)")
-			break
-		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Door / Window Sensor Plus (SG)")
-			break
+		
 	}
 }

smartapps/eyxar/eyxar-notifications.src/eyxar-notifications.groovy

@@ -0,0 +1,136 @@
+/**
+ *  Copyright 2016 EyXAR
+ *
+ *  All rights reserved. No part of this code may be reproduced, distributed, or modified in any form or by any means,
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. 
+ * 
+ *  For ST app: https://play.google.com/store/apps/details?id=eyxar.com.forst
+ *  http://www.eyxar.com
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  EyXAr Notifications
+ *
+ *  Author: EyXAr
+ *  Published: 2016-02-14
+ */
+
+
+definition(
+    name: "EyXAr Notifications",
+    namespace: "eyxar",
+    author: "EyXAr",
+    description: "Enable SmartThings the capability to add voice notifications to your Phones or Tablet anywhere in conjuction with For ST app. https://play.google.com/store/apps/details?id=eyxar.com.forst",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/for-st/For_ST_60px.png",
+    iconX2Url: "https://s3.amazonaws.com/for-st/For_ST_120px.png",
+    iconX3Url: "https://s3.amazonaws.com/for-st/For_ST_256px.png"
+    )
+
+/* For ST will only work if EyXAr Notification is installed and set-up first. */
+
+preferences {
+     section("EyXAr Auto Notifications - For Voice Notification, Install the app 'FOR ST' in Google Play")
+      {
+        input "door", "capability.contactSensor", title: "Monitor Contact Sensor When Nobody's Home", required: false, multiple: true
+    }   
+
+    section("Send Notifications by Text or use below option?") {
+        input("recipients", "contact", title: "Send notifications to"){
+        input "phone", "phone", title: "Phone Number (optional, text charges may apply)",
+                description: "Phone Number", required: false
+        }
+    }
+
+ section("If combine with 'For ST' android app, this will add features of voice notifications.") {
+        input "sendPush", "bool", required: false,
+              title: "Phone/Tablet Auto Notification (Must be set to On =>>)"
+        }   
+    }
+
+/* Presense */    
+
+ section("Arriving and Leaving Auto Notifications - For Voice notifications install 'FOR ST' in Google Play") {
+    input "presence", "capability.presenceSensor", title: "Select Phone/Tablet to Detect (Set Specific Mode Below to Minimize Notifications)", required: false, multiple: true
+      }
+
+def installed() {
+    initialize()
+/* Presense */     
+    subscribe(door, "contact.open", doorOpenHandler)
+    subscribe(door, "contact.closed", doorClosedHandler)
+    subscribe(presence, "presence", myHandler)
+    subscribe(presence, "presence", presenceHandler)
+}
+
+def updated() {
+    initialize()
+}
+
+def initialize() {
+    subscribe(door, "contact.open", doorOpenHandler)
+    subscribe(door, "contact.closed", doorClosedHandler)
+    subscribe(presence, "presence", myHandler)
+    subscribe(presence, "presence", presenceHandler)
+    
+}
+
+def doorOpenHandler(evt) {
+    def message = "EyXAr Detected the ${evt.displayName} is ${evt.value}!"
+    if (sendPush) {
+        sendPush(message)
+    }
+    if (phone) {
+        sendSms(phone, message)
+    }
+}
+
+def doorClosedHandler(evt) {
+    def message = "EyXAr Detected the ${evt.displayName} is ${evt.value}!"
+    if (sendPush) {
+        sendPush(message)
+    }
+    if (phone) {
+        sendSms(phone, message)
+    }
+}
+
+def contactHandler(evt) {
+  if("open" == evt.value)
+
+    // contact was opened, turn on a light maybe?
+    log.debug "Contact is in ${evt.value} state"
+
+  if("closed" == evt.value)
+    // contact was closed, turn off the light?
+    log.debug "Contact is in ${evt.value} state"
+}
+
+/* Presense */  
+def myHandler(evt) {
+  if("present" == evt.value)
+    def message = "EyXAr Detected ${evt.displayName} is ${evt.value}!"
+    if (sendPush) {
+        sendPush(message)
+    }
+    if (phone) {
+        sendSms(phone, message)
+    }
+}
+
+def presenceHandler(evt) {
+
+    if (evt.value == "present") {
+        log.debug "EyXAr ${evt.displayName} has arrived at the ${location}!"
+        sendPush("EyXAr ${evt.displayName} has arrived at the ${location}!")
+    } else if (evt.value == "not present") {
+
+        log.debug "EyXAr ${evt.displayName} has left the ${location}!"
+
+        sendPush("EyXAr ${evt.displayName} has left the ${location}!")
+
+    }
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -332,7 +332,8 @@ private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
 
 	if (deviceType) {
 		return addChildDevice("smartthings", deviceType, dni, hub, ["label": name])
-	} else {
+	}
+	else {
 		log.warn "Device type $hueType not supported"
 		return null
 	}
@@ -348,10 +349,8 @@ def addBulbs() {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
                 if (newHueBulb != null) {
                     d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
-					if (d) {
-						log.debug "created ${d.displayName} with id $dni"
-						d.refresh()
-					}
+                    log.debug "created ${d.displayName} with id $dni"
+                    d.refresh()
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -359,7 +358,7 @@ def addBulbs() {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-				d?.refresh()
+                d.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"

smartapps/smartthings/turn-it-on-for-1-minutes.src/turn-it-on-for-1-minutes.groovy

@@ -1,56 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Turn It On For 5 Minutes
- *  Turn on a switch when a contact sensor opens and then turn it back off 5 minutes later.
- *
- *  Author: SmartThings
- */
-definition(
-    name: "Turn It On For 1 Minutes",
-    namespace: "smartthings",
-    author: "mr.kim",
-    description: "When a SmartSense Multi is opened, a switch will be turned on, and then turned off after 5 minutes.",
-    category: "Safety & Security",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/light_contact-outlet@2x.png"
-)
-
-preferences {
-	section("When it opens..."){
-		input "contact1", "capability.contactSensor"
-	}
-	section("Turn on a switch for 5 minutes..."){
-		input "switch1", "capability.switch"
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def updated(settings) {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	subscribe(contact1, "contact.open", contactOpenHandler)
-}
-
-def contactOpenHandler(evt) {
-	switch1.on()
-	def fiveMinuteDelay = 60 * 1
-	runIn(fiveMinuteDelay, turnOffSwitch)
-}
-
-def turnOffSwitch() {
-	switch1.off()
-}