MSA-1351: The Gideon AI smart app allows you to connect and control all of your smartThings devices with the Gideon AI app. Gideon AI smart app makes your smartThings device even smarter adding features like energy monitoring, vdeo surveillance history etc..

Rolling down staging hotfix to master

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -403,39 +403,21 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		refreshCmds = refreshCmds + [
+		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+            Separating these out in a separate if-else because I do not want to touch Centralite part
-				Separating these out in a separate if-else because I do not want to touch Centralite part
+            as of now.
-				as of now.
+        */
-			*/
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
 	} else {
-		refreshCmds = refreshCmds + [
+		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
-			/* sensitivity - default value (8) */
-			"zcl mfg-code ${manufacturerCode}", "delay 200",
-			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
-		]
 	}
 
 	//Common refresh commands
-	refreshCmds = refreshCmds + [
+	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+			zigbee.readAttribute(0x0001, 0x0020) +
-		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global read 0xFC02 0x0010",
-		"send 0x${device.deviceNetworkId} 1 1","delay 400"
-	]
 
 	return refreshCmds + enrollResponse()
 }
@@ -443,38 +425,15 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = [
+	def configCmds = enrollResponse() +
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+			zigbee.batteryConfig() +
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+			zigbee.temperatureConfig() +
-
+			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,6 +21,13 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
+
+		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
+		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
+		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
+		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
+		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
+		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -125,9 +132,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-		result << response("delay 1200")
+	} else {
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
-	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -0,0 +1,253 @@
+/**
+ *  Gideon
+ *
+ *  Copyright 2016 Nicola Russo
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gideon",
+    namespace: "gideon.api",
+    author: "Braindrain Solutions",
+    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
+    category: "Family",
+    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
+
+
+preferences {
+	section("Control these switches...") {
+        input "switches", "capability.switch", multiple:true
+    }
+    section("Control these motion sensors...") {
+        input "motions", "capability.motionSensor", multiple:true
+    }
+    section("Control these presence sensors...") {
+    	input "presence_sensors", "capability.presenceSensor", multiple:true
+    }
+    section("Control these outlets...") {
+    	input "outlets", "capability.switch", multiple:true
+    }
+    section("Control these locks...") {
+    	input "locks", "capability.lock", multiple:true
+    }
+    section("Control these locks...") {
+	    input "temperature_sensors", "capability.temperatureMeasurement"
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(outlet, "energy", outletHandler)
+  	subscribe(outlet, "switch", outletHandler)
+}
+
+// TODO: implement event handlers
+def outletHandler(evt) {
+	log.debug "$outlet.currentEnergy"
+	//TODO call G API  
+}
+
+
+private device(it, type) {
+	it ? [id: it.id, label: it.label, type: type] : null
+}
+
+//API Mapping
+mappings {
+	path("/getalldevices") {
+    action: [
+      			GET: "getAllDevices"
+    		]
+  	}
+	path("/doorlocks/:id/:command") {
+    action: [
+      GET: "updateDoorLock"
+    ]
+  }
+  	path("/doorlocks/:id") {
+    action: [
+      			GET: "getDoorLockStatus"
+    		]
+  	}
+  	path("/tempsensors/:id") {
+    action: [
+      GET: "getTempSensorsStatus"
+    ]
+  }
+  	path("/presences/:id") {
+    action: [
+      GET: "getPresenceStatus"
+    ]
+  }
+  	path("/motions/:id") {
+    action: [
+      GET: "getMotionStatus"
+    ]
+  }
+  	path("/outlets/:id") {
+    action: [
+      GET: "getOutletStatus"
+    ]
+  }
+  	path("/outlets/:id/:command") {
+    action: [
+      GET: "updateOutlet"
+    ]
+  }
+  	path("/switches/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+}
+
+//API Methods
+def getAllDevices() {
+	def locks_list = locks.collect{device(it,"Lock")}
+    def presences_list = presence_sensors.collect{device(it,"Presence")}
+    def motions_list = motions.collect{device(it,"Motion")}
+    def outlets_list = outlets.collect{device(it,"Outlet")}
+    def switches_list = switches.collect{device(it,"Switch")}
+    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
+    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
+}
+
+//LOCKS
+def getDoorLockStatus() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('lock')]
+        }
+}
+
+def updateDoorLock() {
+	def command = params.command
+    def device = locks.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentValue('lock') == "locked")
+                  device.unlock();
+                else
+                  device.lock();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//PRESENCE
+def getPresenceStatus() {
+
+	def device = presence_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('presence')]
+   }
+}
+
+//MOTION
+def getMotionStatus() {
+
+	def device = motions.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('motion')]
+   }
+}
+
+//OUTLET
+def getOutletStatus() {
+	
+    def device = outlets.find { it.id == params.id }
+   	if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
+  }
+}
+
+def updateOutlet() {
+	
+    def command = params.command
+    def device = outlets.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}                
+
+//SWITCH
+def updateSwitch() {
+    def command = params.command
+    def device = switches.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//TEMPERATURE
+def getTempSensorsStatus() {
+	
+    def device = temperature_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('temperature')]
+   }
+}