MSA-1339: Adding support for the Sercomm SZ-DWS04 is simply a matter or adding an additional fingerprint to already existing Smartsense Open/Close sensor.

Please consider adding it as either a separate device handler or as an additional fingerprint to existing handler.

devicetypes/mikespry/sercomm-sz-dws04-open-closed-sensor.src/sercomm-sz-dws04-open-closed-sensor.groovy

@@ -0,0 +1,326 @@
+/**
+ *  Sercomm SZ-DWS04 Open/Closed Sensor
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+metadata {
+	definition (name: "Sercomm SZ-DWS04 Open/Closed Sensor", namespace: "mikespry", author: "Mike Sprycha") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Temperature Measurement"
+        
+		command "enrollResponse"
+ 
+        fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "Sercomm Corp.", model: "SZ-DWS04N_SF", deviceJoinName: "Sercomm SZ-DWS04"
+	}
+ 
+	simulator {
+ 
+	}
+
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}
+ 
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main (["contact", "temperature"])
+		details(["contact","temperature","battery","refresh"])
+	}
+}
+ 
+def parse(String description) {
+	log.debug "description: $description"
+    
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }
+ 
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
+}
+ 
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private int getHumidity(value) {
+    return Math.round(Double.parseDouble(value))
+}
+ 
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+ 
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+ 
+	return resultMap
+}
+ 
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
+}
+ 
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+    
+    def result = [
+    	name: 'battery'
+    ]
+    
+	def volts = rawValue / 10
+	def descriptionText
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
+		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+	}
+	else {
+		def minVolts = 2.1
+    	def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		result.value = Math.min(100, (int) pct * 100)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug 'Contact Status'
+	def linkText = getLinkText(device)
+	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+	return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+def refresh() {
+	log.debug "Refreshing Temperature and Battery"
+	def refreshCmds = [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
+	]
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Resending the CIE in case the enroll request is sent before CIE is written
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/wackford/tcp-bulb.src/tcp-bulb.groovy

@@ -13,14 +13,14 @@
  *				Documented Header
  *
  *  Change 2:	2014-03-15
- *				Fixed bug where we weren't coming on when changing 
+ *				Fixed bug where we weren't coming on when changing
  *				levels down.
  *
- *  Change 3:   2014-04-02 (lieberman)	
+ *  Change 3:   2014-04-02 (lieberman)
  *              Changed sendEvent() to createEvent() in parse()
  *
  *  Change 4:	2014-04-12 (wackford)
- *				Added current power usage tile 
+ *				Added current power usage tile
  *
  *  Change 5:	2014-09-14 (wackford)
  *				a. Changed createEvent() to sendEvent() in parse() to
@@ -33,7 +33,7 @@
  *				b. added refresh on udate
  *				c. added uninstallFromChildDevice to handle removing from settings
  *				d. Changed to allow bulb to 100%, was possible to get past logic at 99
- * 
+ *
  *  Change 7:	2014-11-09 (wackford)
  *				a. Added bulbpower calcs to device. TCP is broken
  *				b. Changed to set dim level first then on. Much easier on the eys coming from bright.
@@ -42,7 +42,7 @@
  *                       Code
  *****************************************************************
  */
- // for the UI
+// for the UI
 metadata {
 	definition (name: "TCP Bulb", namespace: "wackford", author: "Todd Wackford") {
 		capability "Switch"
@@ -52,26 +52,28 @@ metadata {
 		capability "Switch Level"
 
 		attribute "stepsize", "string"
-        
+
 		command "levelUp"
 		command "levelDown"
-        command "on"
-        command "off"
-        command "setBulbPower"
+		command "on"
+		command "off"
+		command "setBulbPower"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
-    
-    preferences {
+
+	preferences {
 		input "stepsize", "number", title: "Step Size", description: "Dimmer Step Size", defaultValue: 5
 	}
-    
+
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"off", icon:"st.switches.light.on", backgroundColor:"#79b821"
-			state "off", label:'${name}', action:"on", icon:"st.switches.light.off", backgroundColor:"#ffffff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
@@ -82,15 +84,15 @@ metadata {
 		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
 			state "level", label: 'Level ${currentValue}%'
 		}
-        standardTile("lUp", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
-            state "default", action:"levelUp", icon:"st.illuminance.illuminance.bright"
-        }
-        standardTile("lDown", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
-            state "default", action:"levelDown", icon:"st.illuminance.illuminance.light"
-        }
-        valueTile( "power", "device.power", inactiveLabel: false, decoration: "flat") {
-            state "power", label: '${currentValue} Watts'
-        }
+		standardTile("lUp", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
+			state "default", action:"levelUp", icon:"st.illuminance.illuminance.bright"
+		}
+		standardTile("lDown", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
+			state "default", action:"levelDown", icon:"st.illuminance.illuminance.light"
+		}
+		valueTile( "power", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "power", label: '${currentValue} Watts'
+		}
 
 		main(["switch"])
 		details(["switch", "lUp", "lDown", "levelSliderControl", "level" , "power", "refresh" ])
@@ -101,10 +103,10 @@ metadata {
 def parse(description) {
 	//log.debug "parse() - $description"
 	def results = []
-	
-    if ( description == "updated" )
-    	return
-        
+
+	if ( description == "updated" )
+		return
+
 	if (description?.name && description?.value)
 	{
 		results << createEvent(name: "${description?.name}", value: "${description?.value}")
@@ -114,73 +116,73 @@ def parse(description) {
 // handle commands
 def setBulbPower(value) {
 	state.bulbPower = value
-    log.debug "In child with bulbPower of ${state.bulbPower}"
+	log.debug "In child with bulbPower of ${state.bulbPower}"
 }
 
 def on() {
 	log.debug "Executing 'on'"
-    sendEvent(name:"switch",value:on)
+	sendEvent(name:"switch",value:on)
 	parent.on(this)
 
 	def levelSetting = device.latestValue("level") as Float ?: 1.0
-    //def bulbPowerMax = device.latestValue("setBulbPower") as Float
-    //def calculatedPower = bulbPowerMax * (levelSetting / 100)
-    //sendEvent(name: "power", value: calculatedPower.round(1))
-    
-    if (device.latestValue("level") == null) {
+	def bulbPowerMax = device.latestValue("setBulbPower") as Float
+	def calculatedPower = bulbPowerMax * (levelSetting / 100)
+	sendEvent(name: "power", value: calculatedPower.round(1))
+
+	if (device.latestValue("level") == null) {
 		sendEvent( name: "level", value: 1.0 )
-    }
+	}
 }
 
 def off() {
 	log.debug "Executing 'off'"
-    sendEvent(name:"switch",value:off)
+	sendEvent(name:"switch",value:off)
 	parent.off(this)
-    sendEvent(name: "power", value: 0.0)
+	sendEvent(name: "power", value: 0.0)
 }
 
 def levelUp() {
 	def level = device.latestValue("level") as Integer ?: 0
-    def step = state.stepsize as float
-    
-    level+= step
-    
-    if ( level > 100 )
-    	level = 100
-    
-    setLevel(level)
+	def step = state.stepsize as float
+
+	level+= step
+
+	if ( level > 100 )
+		level = 100
+
+	setLevel(level)
 }
 
 def levelDown() {
 	def level = device.latestValue("level") as Integer ?: 0
-    def step = state.stepsize as float
-    
-    level-= step
-    
+	def step = state.stepsize as float
+
+	level-= step
+
 	if ( level <  1 )
-    	level = 1
-    
-    setLevel(level)
+		level = 1
+
+	setLevel(level)
 }
 
 def setLevel(value) {
 	log.debug "in setLevel with value: ${value}"
 	def level = value as Integer
-    
-    sendEvent( name: "level", value: level )
-    sendEvent( name: "switch.setLevel", value:level )
-	parent.setLevel( this, level )
-    
 
-    if (( level > 0 ) && ( level <= 100 ))
-    	on()
-    else
-    	off()
-    
-    //def levelSetting = level as float
-    //def bulbPowerMax = device.latestValue("setBulbPower") as float
-    //def calculatedPower = bulbPowerMax * (levelSetting / 100)
-    //sendEvent(name: "power", value: calculatedPower.round(1))
+	sendEvent( name: "level", value: level )
+	sendEvent( name: "switch.setLevel", value:level )
+	parent.setLevel( this, level )
+
+
+	if (( level > 0 ) && ( level <= 100 ))
+		on()
+	else
+		off()
+
+	def levelSetting = level as float
+	def bulbPowerMax = device.latestValue("setBulbPower") as float
+	def calculatedPower = bulbPowerMax * (levelSetting / 100)
+	sendEvent(name: "power", value: calculatedPower.round(1))
 }
 
 def poll() {
@@ -198,29 +200,29 @@ def installed() {
 }
 
 def updated() {
-    initialize()
-    refresh()
+	initialize()
+	refresh()
 }
 
 def initialize() {
 	if ( !settings.stepsize )
-        state.stepsize = 10 //set the default stepsize
-    else
-    	state.stepsize = settings.stepsize
+		state.stepsize = 10 //set the default stepsize
+	else
+		state.stepsize = settings.stepsize
 }
 
 /*******************************************************************************
-	Method :uninstalled(args)
-    (args) :none
-    returns:Nothing
-    ERRORS :No error handling is done
-    
-    Purpose:This is standard ST method.
-    		Gets called when "remove" is selected in child device "preferences" 
-    		tile. It also get's called when "deleteChildDevice(child)" is 
-            called from parent service manager app.
-*******************************************************************************/
+ Method :uninstalled(args)
+ (args) :none
+ returns:Nothing
+ ERRORS :No error handling is done
+
+ Purpose:This is standard ST method.
+ Gets called when "remove" is selected in child device "preferences"
+ tile. It also get's called when "deleteChildDevice(child)" is
+ called from parent service manager app.
+ *******************************************************************************/
 def uninstalled() {
 	log.debug "Executing 'uninstall' in device type"
-    parent.uninstallFromChildDevice(this)
+	parent.uninstallFromChildDevice(this)
 }

smartapps/mmacaula/tcp-bulbs-more-reliable.src/tcp-bulbs-more-reliable.groovy

@@ -1,679 +0,0 @@
-/**
- *  TCP Bulbs (Connect)
- *
- *  Copyright 2014 Todd Wackford
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-import java.security.MessageDigest;
-
-private apiUrl() { "https://tcp.greenwavereality.com/gwr/gop.php?" }
-
-definition(
-    name: "TCP Bulbs - more reliable",
-    namespace: "mmacaula",
-    author: "Mike Macaulay",
-    description: "Connect your TCP bulbs to SmartThings using Cloud to Cloud integration. You must create a remote login acct on TCP Mobile App.",
-    category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png",
-    singleInstance: true
-)
-
-
-preferences {
-    def msg = """Tap 'Next' after you have entered in your TCP Mobile remote credentials.
-
-Once your credentials are accepted, SmartThings will scan your TCP installation for Bulbs."""
-
-    page(name: "selectDevices", title: "Connect Your TCP Lights to SmartThings", install: false, uninstall: true, nextPage: "chooseBulbs") {
-        section("TCP Connected Remote Credentials") {
-            input "username", "text", title: "Enter TCP Remote Email/UserName", required: true
-            input "password", "password", title: "Enter TCP Remote Password", required: true
-            paragraph msg
-        }
-    }
-
-    page(name: "chooseBulbs", title: "Choose Bulbs to Control With SmartThings", content: "initialize")
-}
-
-def installed() {
-    debugOut "Installed with settings: ${settings}"
-
-    unschedule()
-    unsubscribe()
-
-    setupBulbs()
-
-    log.debug "schedule every 5 minutes syncronizeDevices)"
-    runEvery5Minutes(syncronizeDevices)
-}
-
-def updated() {
-    debugOut "Updated with settings: ${settings}"
-
-    unschedule()
-
-    setupBulbs()
-
-    log.debug "schedule update every 5 minutes syncronizeDevices)"
-    runEvery5Minutes(syncronizeDevices)
-}
-
-def uninstalled()
-{
-    unschedule() //in case we have hanging runIn()'s
-}
-
-private removeChildDevices(delete)
-{
-    debugOut "deleting ${delete.size()} bulbs"
-    debugOut "deleting ${delete}"
-    delete.each {
-        deleteChildDevice(it.device.deviceNetworkId)
-    }
-}
-
-def uninstallFromChildDevice(childDevice)
-{
-    def errorMsg = "uninstallFromChildDevice was called and "
-    if (!settings.selectedBulbs) {
-        debugOut errorMsg += "had empty list passed in"
-        return
-    }
-
-    def dni = childDevice.device.deviceNetworkId
-
-    if ( !dni ) {
-        debugOut errorMsg += "could not find dni of device"
-        return
-    }
-
-    def newDeviceList = settings.selectedBulbs - dni
-    app.updateSetting("selectedBulbs", newDeviceList)
-
-    debugOut errorMsg += "completed succesfully"
-}
-
-
-def setupBulbs() {
-    debugOut "In setupBulbs"
-
-    def bulbs = state.devices
-    def deviceFile = "TCP Bulb"
-
-    selectedBulbs.each { did ->
-        //see if this is a selected bulb and install it if not already
-        def d = getChildDevice(did)
-
-        if(!d) {
-            def newBulb = bulbs.find { (it.did) == did }
-            d = addChildDevice("wackford", deviceFile, did, null, [name: "${newBulb?.name}", label: "${newBulb?.name}", completedSetup: true])
-
-            /*if ( isRoom(did) ) { //change to the multi light group icon for a room device
-                d.setIcon("switch", "on",  "st.lights.multi-light-bulb-on")
-                d.setIcon("switch", "off",  "st.lights.multi-light-bulb-off")
-                d.save()
-            }*/
-
-        } else {
-            debugOut "We already added this device"
-        }
-    }
-
-    // Delete any that are no longer in settings
-    def delete = getChildDevices().findAll { !selectedBulbs?.contains(it.deviceNetworkId) }
-    removeChildDevices(delete)
-
-    //we want to ensure syncronization between rooms and bulbs
-    //syncronizeDevices()
-}
-
-def initialize() {
-
-    atomicState.token = ""
-
-    getToken()
-
-    if ( atomicState.token == "error" ) {
-        return dynamicPage(name:"chooseBulbs", title:"TCP Login Failed!\r\nTap 'Done' to try again", nextPage:"", install:false, uninstall: false) {
-            section("") {}
-        }
-    } else {
-        "we're good to go"
-        debugOut "We have Token."
-    }
-
-    //getGatewayData() //we really don't need anything from the gateway
-
-    deviceDiscovery()
-
-    def options = devicesDiscovered() ?: []
-
-    def msg = """Tap 'Done' after you have selected the desired devices."""
-
-    return dynamicPage(name:"chooseBulbs", title:"TCP and SmartThings Connected!", nextPage:"", install:true, uninstall: true) {
-        section("Tap Below to View Device List") {
-            input "selectedBulbs", "enum", required:false, title:"Select Bulb/Fixture", multiple:true, options:options
-            paragraph msg
-        }
-    }
-}
-
-def deviceDiscovery() {
-    def data = "<gip><version>1</version><token>${atomicState.token}</token></gip>"
-
-    def Params = [
-        cmd: "RoomGetCarousel",
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    def cmd = toQueryString(Params)
-
-    def rooms = ""
-    log.debug 'trying to discover devices'
-    apiPost(cmd) { response ->
-        rooms = response.data.gip.room
-    }
-
-    debugOut "rooms data = ${rooms}"
-
-    def devices = []
-    def bulbIndex = 1
-    def lastRoomName = null
-    def deviceList = []
-
-    if ( rooms[1] == null ) {
-        def roomId = rooms.rid
-        def roomName = rooms.name
-        devices  = rooms.device
-        if ( devices[1] != null ) {
-            debugOut "Room Device Data: did:${roomId} roomName:${roomName}"
-            //deviceList += ["name" : "${roomName}", "did" : "${roomId}", "type" : "room"]
-            devices.each({
-                debugOut "Bulb Device Data: did:${it?.did} room:${roomName} BulbName:${it?.name}"
-                deviceList += ["name" : "${roomName} ${it?.name}", "did" : "${it?.did}", "type" : "bulb"]
-            })
-        } else {
-            debugOut "Bulb Device Data: did:${it?.did} room:${roomName} BulbName:${it?.name}"
-            deviceList += ["name" : "${roomName} ${it?.name}", "did" : "${it?.did}", "type" : "bulb"]
-        }
-    } else {
-        rooms.each({
-            devices  = it.device
-            def roomName = it.name
-            if ( devices[1] != null ) {
-                def roomId = it?.rid
-                debugOut "Room Device Data: did:${roomId} roomName:${roomName}"
-                //deviceList += ["name" : "${roomName}", "did" : "${roomId}", "type" : "room"]
-                devices.each({
-                    debugOut "Bulb Device Data: did:${it?.did} room:${roomName} BulbName:${it?.name}"
-                    deviceList += ["name" : "${roomName} ${it?.name}", "did" : "${it?.did}", "type" : "bulb"]
-                })
-            } else {
-                debugOut "Bulb Device Data: did:${devices?.did} room:${roomName} BulbName:${devices?.name}"
-                deviceList += ["name" : "${roomName} ${devices?.name}", "did" : "${devices?.did}", "type" : "bulb"]
-            }
-        })
-    }
-    devices = ["devices" : deviceList]
-    state.devices = devices.devices
-}
-
-Map devicesDiscovered() {
-    def devices =  state.devices
-    def map = [:]
-    if (devices instanceof java.util.Map) {
-        devices.each {
-            def value = "${it?.name}"
-            def key = it?.did
-            map["${key}"] = value
-        }
-    } else { //backwards compatable
-        devices.each {
-            def value = "${it?.name}"
-            def key = it?.did
-            map["${key}"] = value
-        }
-    }
-    map
-}
-
-def getGatewayData() {
-    debugOut "In getGatewayData"
-
-    def data = "<gip><version>1</version><token>${atomicState.token}</token></gip>"
-
-    def qParams = [
-        cmd: "GatewayGetInfo",
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    def cmd = toQueryString(qParams)
-
-    apiPost(cmd) { response ->
-        debugOut "the gateway reponse is ${response.data.gip.gateway}"
-    }
-
-}
-
-def getToken(Closure callback) {
-
-    atomicState.token = ""
-
-    if (password) {
-        def hashedPassword = generateMD5(password)
-
-        def data = "<gip><version>1</version><email>${username}</email><password>${hashedPassword}</password></gip>"
-
-        def qParams = [
-            cmd : "GWRLogin",
-            data: "${data}",
-            fmt : "json"
-        ]
-
-        def cmd = toQueryString(qParams)
-
-        apiPost(cmd) { response ->
-            def status = response.data.gip.rc
-
-            //sendNotificationEvent("Get token status ${status}")
-
-            if (status != "200") {//success code = 200
-                def errorText = response.data.gip.error
-                debugOut "Error logging into TCP Gateway. Error = ${errorText}"
-                atomicState.token = "error"
-            } else {
-                atomicState.token = response.data.gip.token
-                if(callback){
-                    callback.call()
-                }
-            }
-        }
-    } else {
-        log.warn "Unable to log into TCP Gateway. Error = Password is null"
-        atomicState.token = "error"
-    }
-}
-
-def apiPost(String data, Integer retryCount = 0, Closure callback) {
-    debugOut "In apiPost with data: ${data}"
-    def params = [
-        uri: apiUrl(),
-        body: data
-    ]
-
-    httpPost(params) {
-        response ->
-            def rc = response.data.gip.rc
-
-            if ( rc == "200" ) {
-                debugOut ("Return Code = ${rc} = Command Succeeded.")
-                callback.call(response)
-
-            }  else if ( rc.startsWith("4") || rc.startsWith("5") ) {
-                debugOut "Return Code = ${rc} = Error: Something happened!" //Error code from gateway
-                sendNotificationEvent("Return Code = ${rc} = Error: Something happened!  Retry # ${retryCount}" )
-                log.debug "Refreshing Token"
-                 if(retryCount > 5){
-                    // give up, send a notification
-                    sendNotificationEvent("TCP Lighting is having Communication Errors. Error code = ${rc}. Gave up after ${retryCount} tries")
-                }
-                getToken({  ->
-                    def updatedTokenData = data.replaceFirst("<token>[^<]*</token>", '<token>${atomicState.token}</token>')
-                    // try again if we got our token
-                    sendNotificationEvent('re-fetched token, trying again')
-
-                    apiPost(updatedTokenData, retryCount++, callback)
-                })
-                //callback.call(response) //stubbed out so getToken works (we had race issue)
-
-            } else {
-                log.error "Return Code = ${rc} = Error!" //Error code from gateway
-                sendNotificationEvent("TCP Lighting is having Communication Errors. Error code = ${rc}. Check that TCP Gateway is online")
-                callback.call(response)
-            }
-    }
-}
-
-
-//this is not working. TCP power reporting is broken. Leave it here for future fix
-def calculateCurrentPowerUse(deviceCapability, usePercentage) {
-    debugOut "In calculateCurrentPowerUse()"
-
-    debugOut "deviceCapability: ${deviceCapability}"
-    debugOut "usePercentage: ${usePercentage}"
-
-    def calcPower = usePercentage * 1000
-    def reportPower = calcPower.round(1) as String
-
-    debugOut "report power = ${reportPower}"
-
-    return reportPower
-}
-
-def generateSha256(String s) {
-
-    MessageDigest digest = MessageDigest.getInstance("SHA-256")
-    digest.update(s.bytes)
-    new BigInteger(1, digest.digest()).toString(16).padLeft(40, '0')
-}
-
-def generateMD5(String s) {
-    MessageDigest digest = MessageDigest.getInstance("MD5")
-    digest.update(s.bytes);
-    new BigInteger(1, digest.digest()).toString(16).padLeft(32, '0')
-}
-
-String toQueryString(Map m) {
-    return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
-}
-
-def checkDevicesOnline(bulbs) {
-    debugOut "In checkDevicesOnline()"
-
-    def onlineBulbs = []
-    def thisBulb = []
-
-    bulbs.each {
-        def dni = it?.did
-        thisBulb = it
-
-        def data = "<gip><version>1</version><token>${atomicState.token}</token><did>${dni}</did></gip>"
-
-        def qParams = [
-            cmd: "DeviceGetInfo",
-            data: "${data}",
-            fmt: "json"
-        ]
-
-        def cmd = toQueryString(qParams)
-
-        def bulbData = []
-
-        apiPost(cmd) { response ->
-            bulbData = response.data.gip
-        }
-
-        if ( bulbData?.offline == "1" ) {
-            debugOut "${it?.name} is offline with offline value of ${bulbData?.offline}"
-
-        } else {
-            debugOut "${it?.name} is online with offline value of ${bulbData?.offline}"
-            onlineBulbs += thisBulb
-        }
-    }
-    return onlineBulbs
-}
-
-def syncronizeDevices() {
-    debugOut "In syncronizeDevices"
-
-    def update = getChildDevices().findAll { selectedBulbs?.contains(it.deviceNetworkId) }
-
-    update.each {
-        def dni = getChildDevice( it.deviceNetworkId )
-        debugOut "dni = ${dni}"
-
-        if (isRoom(dni)) {
-            pollRoom(dni)
-        } else {
-            poll(dni)
-        }
-    }
-    getToken()
-
-}
-
-boolean isRoom(dni) {
-    def device = state.devices.find() {(( it.type == 'room') && (it.did == "${dni}"))}
-}
-
-boolean isBulb(dni) {
-    def device = state.devices.find() {(( it.type == 'bulb') && (it.did == "${dni}"))}
-}
-
-def debugEvent(message, displayEvent) {
-
-    def results = [
-        name: "appdebug",
-        descriptionText: message,
-        displayed: displayEvent
-    ]
-    log.debug "Generating AppDebug Event: ${results}"
-    sendEvent (results)
-
-}
-
-def debugOut(msg) {
-    log.debug msg
-    //sendNotificationEvent(msg) //Uncomment this for troubleshooting only
-}
-
-
-/**************************************************************************
- Child Device Call In Methods
- **************************************************************************/
-def on(childDevice) {
-    debugOut "On request from child device"
-
-    def dni = childDevice.device.deviceNetworkId
-    def data = ""
-    def cmd = ""
-
-    if ( isRoom(dni) ) { // this is a room, not a bulb
-        data = "<gip><version>1</version><token>$atomicState.token</token><rid>${dni}</rid><type>power</type><value>1</value></gip>"
-        cmd = "RoomSendCommand"
-    } else {
-        data = "<gip><version>1</version><token>$atomicState.token</token><did>${dni}</did><type>power</type><value>1</value></gip>"
-        cmd = "DeviceSendCommand"
-    }
-
-    def qParams = [
-        cmd: cmd,
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    cmd = toQueryString(qParams)
-
-    apiPost(cmd) { response ->
-        debugOut "ON result: ${response.data}"
-    }
-
-    //we want to ensure syncronization between rooms and bulbs
-    //runIn(2, "syncronizeDevices")
-}
-
-def off(childDevice) {
-    debugOut "Off request from child device"
-
-    def dni = childDevice.device.deviceNetworkId
-    def data = ""
-    def cmd = ""
-
-    if ( isRoom(dni) ) { // this is a room, not a bulb
-        data = "<gip><version>1</version><token>$atomicState.token</token><rid>${dni}</rid><type>power</type><value>0</value></gip>"
-        cmd = "RoomSendCommand"
-    } else {
-        data = "<gip><version>1</version><token>$atomicState.token</token><did>${dni}</did><type>power</type><value>0</value></gip>"
-        cmd = "DeviceSendCommand"
-    }
-
-    def qParams = [
-        cmd: cmd,
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    cmd = toQueryString(qParams)
-
-    apiPost(cmd) { response ->
-        debugOut "${response.data}"
-    }
-
-    //we want to ensure syncronization between rooms and bulbs
-    //runIn(2, "syncronizeDevices")
-}
-
-def setLevel(childDevice, value) {
-    debugOut "setLevel request from child device"
-
-    def dni = childDevice.device.deviceNetworkId
-    def data = ""
-    def cmd = ""
-
-    if ( isRoom(dni) ) { // this is a room, not a bulb
-        data = "<gip><version>1</version><token>${atomicState.token}</token><rid>${dni}</rid><type>level</type><value>${value}</value></gip>"
-        cmd = "RoomSendCommand"
-    } else {
-        data = "<gip><version>1</version><token>${atomicState.token}</token><did>${dni}</did><type>level</type><value>${value}</value></gip>"
-        cmd = "DeviceSendCommand"
-    }
-
-    def qParams = [
-        cmd: cmd,
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    cmd = toQueryString(qParams)
-
-    apiPost(cmd) { response ->
-        debugOut "${response.data}"
-    }
-
-    //we want to ensure syncronization between rooms and bulbs
-    //runIn(2, "syncronizeDevices")
-}
-
-// Really not called from child, but called from poll() if it is a room
-def pollRoom(dni) {
-    debugOut "In pollRoom"
-    def data = ""
-    def cmd = ""
-    def roomDeviceData = []
-
-    data = "<gip><version>1</version><token>${atomicState.token}</token><rid>${dni}</rid><fields>name,power,control,status,state</fields></gip>"
-    cmd = "RoomGetDevices"
-
-    def qParams = [
-        cmd: cmd,
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    cmd = toQueryString(qParams)
-
-    apiPost(cmd) { response ->
-        roomDeviceData = response.data.gip
-    }
-
-    debugOut "Room Data: ${roomDeviceData}"
-
-    def totalPower = 0
-    def totalLevel = 0
-    def cnt = 0
-    def onCnt = 0 //used to tally on/off states
-
-    roomDeviceData.device.each({
-        if ( getChildDevice(it.did) ) {
-            totalPower += it.other.bulbpower.toInteger()
-            totalLevel += it.level.toInteger()
-            onCnt += it.state.toInteger()
-            cnt += 1
-        }
-    })
-
-    def avgLevel = totalLevel/cnt
-    def usingPower = totalPower * (avgLevel / 100) as float
-    def room = getChildDevice( dni )
-
-    //the device is a room but we use same type file
-    sendEvent( dni, [name: "setBulbPower",value:"${totalPower}"] ) //used in child device calcs
-
-    //if all devices in room are on, room is on
-    if ( cnt == onCnt ) { // all devices are on
-        sendEvent( dni, [name: "switch",value:"on"] )
-        sendEvent( dni, [name: "power",value:usingPower.round(1)] )
-
-    } else { //if any device in room is off, room is off
-        sendEvent( dni, [name: "switch",value:"off"] )
-        sendEvent( dni, [name: "power",value:0.0] )
-    }
-
-    debugOut "Room Using Power: ${usingPower.round(1)}"
-}
-
-def poll(childDevice) {
-    debugOut "In poll() with ${childDevice}"
-
-
-    def dni = childDevice.device.deviceNetworkId
-
-    def bulbData = []
-    def data = ""
-    def cmd = ""
-
-    if ( isRoom(dni) ) { // this is a room, not a bulb
-        pollRoom(dni)
-        return
-    }
-
-    data = "<gip><version>1</version><token>${atomicState.token}</token><did>${dni}</did></gip>"
-    cmd = "DeviceGetInfo"
-
-    def qParams = [
-        cmd: cmd,
-        data: "${data}",
-        fmt: "json"
-    ]
-
-    cmd = toQueryString(qParams)
-
-    apiPost(cmd) { response ->
-        bulbData = response.data.gip
-        debugOut "This Bulbs Data Return = ${bulbData}"
-
-        def bulb = getChildDevice( dni )
-
-        //set the devices power max setting to do calcs within the device type
-        if ( bulbData.other.bulbpower )
-            sendEvent( dni, [name: "setBulbPower",value:"${bulbData.other.bulbpower}"] )
-
-        if (( bulbData.state == "1" ) && ( bulb?.currentValue("switch") != "on" ))
-            sendEvent( dni, [name: "switch",value:"on"] )
-
-        if (( bulbData.state == "0" ) && ( bulb?.currentValue("switch") != "off" ))
-            sendEvent( dni, [name: "switch",value:"off"] )
-
-        //if ( bulbData.level != bulb?.currentValue("level")) {
-        //    sendEvent( dni, [name: "level",value: "${bulbData.level}"] )
-        //    sendEvent( dni, [name: "setLevel",value: "${bulbData.level}"] )
-        //}
-
-        if (( bulbData.state == "1" ) && ( bulbData.other.bulbpower )) {
-            def levelSetting = bulbData.level as float
-            def bulbPowerMax = bulbData.other.bulbpower as float
-            def calculatedPower = bulbPowerMax * (levelSetting / 100)
-            sendEvent( dni, [name: "power", value: calculatedPower.round(1)] )
-        }
-
-        if (( bulbData.state == "0" ) && ( bulbData.other.bulbpower ))
-            sendEvent( dni, [name: "power", value: 0.0] )
-
-    }
-
-
-}