Merge pull request #1109 from SmartThingsCommunity/staging

Rolling up staging to production for deploy

devicetypes/com-lametric/lametric.src/lametric.groovy

@@ -1,126 +0,0 @@
-/**
- *  LaMetric
- *
- *  Copyright 2016 Smart Atoms Ltd.
- *  Author: Mykola Kirichuk
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "LaMetric", namespace: "com.lametric", author: "Mykola Kirichuk") {
-		capability "Actuator"
-		capability "Notification"
-		capability "Polling"
-		capability "Refresh"
-        
-        attribute "currentIP", "string"
-        attribute "serialNumber", "string"
-        attribute "volume", "string"
-        attribute "mode", "enum", ["offline","online"]
-        
-        command "setOffline"
-        command "setOnline"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles (scale: 2){
-		// TODO: define your main and details tiles here
-         tiles(scale: 2) {
-     	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("mode", key: "PRIMARY_CONTROL") {
-	            attributeState "online", label: "LaMetric", action: "", icon:  "https://developer.lametric.com/assets/smart_things/time_100.png", backgroundColor: "#F3C200"
-                attributeState "offline", label: "LaMetric", action: "", icon: "https://developer.lametric.com/assets/smart_things/time_100.png", backgroundColor: "#F3F3F3"
-			}
-	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
-	            attributeState "default", label:'SN: ${currentValue}'
-			}
-        }
-		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
-			state "default", label:'SN: ${currentValue}'
-		}
-		valueTile("networkAddress", "device.currentIP", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
-			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
-		}
-
-		main (["rich-control"])
-		details(["rich-control","networkAddress"])
-	}
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-    if (description)
-    {
-    	unschedule("setOffline")
-    }
-	// TODO: handle 'battery' attribute
-	// TODO: handle 'button' attribute
-	// TODO: handle 'status' attribute
-	// TODO: handle 'level' attribute
-	// TODO: handle 'level' attribute
-
-}
-
-// handle commands
-def setOnline()
-{
-	log.debug("set online");
-    sendEvent(name:"mode", value:"online")
-  	unschedule("setOffline")
-}
-def setOffline(){
-	log.debug("set offline");
-    sendEvent(name:"mode", value:"offline")
-}
-
-def setLevel(level) {
-	log.debug "Executing 'setLevel' ${level}"
-	// TODO: handle 'setLevel' command
-}
-
-def deviceNotification(notif) {
-	log.debug "Executing 'deviceNotification' ${notif}"
-	// TODO: handle 'deviceNotification' command
-    def result = parent.sendNotificationMessageToDevice(device.deviceNetworkId, notif);
-    log.debug ("result ${result}");
-    log.debug parent;
-    return result;
-}
-
-def poll() {
-	// TODO: handle 'poll' command
-    log.debug "Executing 'poll'"
-  	if (device.currentValue("currentIP") != "Offline")
-    {
-	    runIn(30, setOffline)
-    }
-    parent.poll(device.deviceNetworkId)
-}
-
-def refresh() {    
-	log.debug "Executing 'refresh'"
-//    log.debug "${device?.currentIP}"
-    log.debug "${device?.currentValue("currentIP")}"
-    log.debug "${device?.currentValue("serialNumber")}"
-    log.debug "${device?.currentValue("volume")}"
-//    poll()
-	
-}
-
-/*def setLevel() {
-	log.debug "Executing 'setLevel'"
-	// TODO: handle 'setLevel' command
-}*/

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,12 +22,14 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
+		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -326,6 +328,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []
@@ -352,7 +357,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,9 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -245,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,8 +64,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -747,8 +749,16 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    return boseRefreshNowPlaying()
+    // Fix to get faster update of power status back from speaker after sending on/off
+    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    // Note: This is a temporary hack that should be replaced by a re-design of the
+    // DTH to use sendHubCommand for all commands
+    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
+    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
+    sendHubCommand(boseGET("/now_playing"))
+    if (enable) {
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+    }
 }
 
 /**
@@ -787,10 +797,11 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    log.warn "boseConfirmPowerOn() attempt #" + tries
-    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
     }
     return result
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,7 +21,9 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint inClusters: "0x26"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {
@@ -42,6 +44,10 @@ metadata {
 		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -70,11 +76,28 @@ metadata {
 		}
 
 		main(["switch"])
-		details(["switch", "level", "indicator", "refresh"])
+		details(["switch", "level", "refresh"])
 
 	}
 }
 
+def updated(){
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -202,19 +225,19 @@ def refresh() {
 	delayBetween(commands,100)
 }
 
-def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on")
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+void indicatorWhenOn() {
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off")
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+void indicatorWhenOff() {
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never")
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+void indicatorNever() {
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {
@@ -224,4 +247,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,7 +255,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,7 +271,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -24,7 +24,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-        
+
         command "enrollResponse"
 
 	}
@@ -73,7 +73,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +87,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +141,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +153,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    } 
- 
+    }
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -240,7 +240,8 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,7 +338,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,7 +234,8 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,32 +13,34 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+		capability "Health Check"
+		capability "Sensor"
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -71,10 +73,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +90,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +101,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,7 +127,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -135,14 +137,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -151,10 +153,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -167,7 +169,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -200,7 +202,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -213,11 +215,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -228,7 +230,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -273,6 +276,7 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,7 +205,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +21,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-    	
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +58,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        
+
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-        
+
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
- 
+
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +99,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +125,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +147,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -163,7 +163,7 @@ private Map parseCustomMessage(String description) {
 private Map parseIasMessage(String description) {
     List parsedMsg = description.split(' ')
     String msgCode = parsedMsg[2]
-    
+
     Map resultMap = [:]
     switch(msgCode) {
         case '0x0020': // Closed/No Motion/Dry
@@ -196,7 +196,7 @@ private Map parseIasMessage(String description) {
     }
     return resultMap
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +209,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,7 +223,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -261,7 +262,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-    
+
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -274,24 +275,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-        
+
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-        
+
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -299,11 +300,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
+    [
+
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-        
+
     ]
 }
 private hex(value) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -0,0 +1,205 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
+	}
+
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+		status "09%": "command: 2003, payload: 09"
+		status "10%": "command: 2003, payload: 0A"
+		status "33%": "command: 2003, payload: 21"
+		status "66%": "command: 2003, payload: 42"
+		status "99%": "command: 2003, payload: 63"
+
+		// reply messages
+		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
+		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
+		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
+		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
+		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
+		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
+		}
+
+		main(["switch"])
+		details(["switch", "level", "refresh"])
+
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description != "updated") {
+		log.debug "parse() >> zwave.parse($description)"
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
+	dimmerEvents(cmd)
+}
+
+private dimmerEvents(physicalgraph.zwave.Command cmd) {
+	def value = (cmd.value ? "on" : "off")
+	def result = [createEvent(name: "switch", value: value)]
+	if (cmd.value && cmd.value <= 100) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
+	}
+	return result
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport $cmd"
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	createEvent([name: "indicatorStatus", value: value])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
+	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def on() {
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
+}
+
+def off() {
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
+}
+
+def setLevel(value) {
+	log.debug "setLevel >> value: $value"
+	def valueaux = value as Integer
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	if (level > 0) {
+		sendEvent(name: "switch", value: "on")
+	} else {
+		sendEvent(name: "switch", value: "off")
+	}
+	sendEvent(name: "level", value: level, unit: "%")
+	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+}
+
+def setLevel(value, duration) {
+	log.debug "setLevel >> value: $value, duration: $duration"
+	def valueaux = value as Integer
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
+	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
+	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
+				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
+}
+
+def poll() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def refresh() {
+	log.debug "refresh() is called"
+	def commands = []
+	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
+	if (getDataValue("MSR") == null) {
+		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	}
+	delayBetween(commands,100)
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -36,6 +35,7 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
+		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -81,7 +81,7 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
 			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
@@ -94,9 +94,9 @@ def updated() {
 }
 
 def configure() {
-	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		batteryGetCommand()
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
 	], 6000)
 }
 
@@ -147,12 +147,11 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -170,12 +169,11 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
-		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << batteryGetCommand()
+		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
@@ -212,7 +210,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(batteryGetCommand())
+			result << response(command(zwave.batteryV1.batteryGet()))
 		}
 	}
 
@@ -220,7 +218,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -232,12 +230,16 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-def batteryGetCommand() {
-	def cmd = zwave.batteryV1.batteryGet()
-	if (state.sec) {
-		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
 	}
-	cmd.format()
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
 }
 
 def retypeBasedOnMSR() {
@@ -260,8 +262,12 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Door / Window Sensor Plus (SG)")
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
 			break
 	}
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -0,0 +1,270 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
+		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["contact"])
+		details(["contact","battery"])
+	}
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
+		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
+		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
+		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
+		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
+		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
+		status "wake up" : "command: 9881, payload: 00 84 07"
+		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
+		status "battery low" : "command: 9881, payload: 00 80 03 FF"
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x84: 2,  // WakeUp
+		0x86: 1,  // Version
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if (!device.currentState("ManufacturerCode")) {
+				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			}
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+		}
+	} else if (cmd.notificationType) {
+		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -0,0 +1,327 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Temperature Measurement"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+				
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
+		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles {
+		standardTile("motion", "device.motion", width: 3, height: 2) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:"%"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery"])
+	}
+}
+
+def updated() {
+	if (!device.currentState("ManufacturerCode")) {
+		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x31: 5,  // SensorMultilevel
+		0x84: 2	  // WakeUp
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	def result = []
+	if (value) {
+		log.debug "sensorValueEvent($value) : active"
+		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
+	} else {
+		log.debug "sensorValueEvent($value) : inactive"
+		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x08) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0xFF) {
+			result << sensorValueEvent(1)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def result = []
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			break;
+		case 3:
+			map.name = "illuminance"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			break;
+		case 5:
+			map.name = "humidity"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = cmd.scale == 0 ? "%" : ""
+			break;
+		case 0x1E:
+			map.name = "loudness"
+			map.unit = cmd.scale == 1 ? "dBA" : "dB"
+			map.value = cmd.scaledSensorValue.toString()
+			break;
+		default:
+			map.descriptionText = cmd.toString()
+	}
+	result << createEvent(map)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+	
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	if (manufacturerCode == "0109" && productTypeCode == "2002") {
+		result << response(secureSequence([
+			// Change re-trigger duration to 1 minute
+			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
+			zwave.batteryV1.batteryGet(),
+			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+		], 400))
+	}
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -0,0 +1,143 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+ 		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+	}
+
+	// tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			}
+		}
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "switch"
+		details(["switch","refresh"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	[name: "indicatorStatus", value: value, display: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def on() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def off() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def poll() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+
+def refresh() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -15,12 +15,15 @@ metadata {
 	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Indicator"
-		capability "Switch"
+ 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint inClusters: "0x25"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 
 	// simulator metadata
@@ -33,6 +36,10 @@ metadata {
 		reply "200100,delay 100,2502": "command: 2503, payload: 00"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
@@ -52,10 +59,27 @@ metadata {
 		}
 
 		main "switch"
-		details(["switch","refresh","indicator"])
+		details(["switch","refresh"])
 	}
 }
 
+def updated(){
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -139,19 +163,19 @@ def refresh() {
 	])
 }
 
-def indicatorWhenOn() {
+void indicatorWhenOn() {
 	sendEvent(name: "indicatorStatus", value: "when on", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
+void indicatorWhenOff() {
 	sendEvent(name: "indicatorStatus", value: "when off", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
+void indicatorNever() {
 	sendEvent(name: "indicatorStatus", value: "never", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {

smartapps/com-lametric/lametric-connect.src/lametric-connect.groovy

@@ -1,839 +0,0 @@
-/**
- *  LaMetric (Connect)
- *
- *  Copyright 2016 Smart Atoms Ltd.
- *  Author: Mykola Kirichuk
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- 
-definition(
-    name: "LaMetric (Connect)",
-    namespace: "com.lametric",
-    author: "Mykola Kirichuk",
-    description: "Control your LaMetric Time smart display",
-    category: "Family",
-    iconUrl: "https://developer.lametric.com/assets/smart_things/smart_things_60.png",
-    iconX2Url: "https://developer.lametric.com/assets/smart_things/smart_things_120.png",
-    iconX3Url: "https://developer.lametric.com/assets/smart_things/smart_things_120.png",
-    singleInstance: true)
-{
-    appSetting "clientId"
-    appSetting "clientSecret"
-}
-
-preferences {
-    page(name: "auth", title: "LaMetric", nextPage:"", content:"authPage", uninstall: true, install:true)
-    page(name:"deviceDiscovery", title:"Device Setup", content:"deviceDiscovery", refreshTimeout:5);
-}
-
-mappings {
-    path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
-    path("/oauth/callback") {action: [GET: "callback"]}
-}
-
-import groovy.json.JsonOutput
-
-def getEventNameListOfUserDeviceParsed(){ "EventListOfUserRemoteDevicesParsed" }
-def getEventNameTokenRefreshed(){ "EventAuthTokenRefreshed" }
-
-def installed() {
-    log.debug "Installed with settings: ${settings}"
-    initialize()
-}
-
-def updated() {
-    log.debug "Updated with settings: ${settings}"
-    sendEvent(name:"Updated", value:true)
-    unsubscribe()
-    initialize()
-
-
-}
-
-def initialize() {
-    // TODO: subscribe to attributes, devices, locations, etc.
-    log.debug("initialize");
-    state.subscribe  = false;
-    if (selecteddevice) {
-        addDevice()
-        subscribeNetworkEvents(true)
-        refreshDevices();
-    }
-}
-
-/**
-* Get the name of the new device to instantiate in the user's smartapps
-* This must be an app owned by the namespace (see #getNameSpace).
-*
-* @return name
-*/
-
-def getDeviceName() {
-    return "LaMetric"
-}
-
-/**
-* Returns the namespace this app and siblings use
-*
-* @return namespace
-*/
-def getNameSpace() {
-    return "com.lametric"
-}
-
-
-/**
-* Returns all discovered devices or an empty array if none
-*
-* @return array of devices
-*/
-def getDevices() {
-    state.remoteDevices = state.remoteDevices ?: [:]
-}
-
-/**
-* Returns an array of devices which have been verified
-*
-* @return array of verified devices
-*/
-def getVerifiedDevices() {
-    getDevices().findAll{ it?.value?.verified == true }
-}
-
-/**
-* Generates a Map object which can be used with a preference page
-* to represent a list of devices detected and verified.
-*
-* @return Map with zero or more devices
-*/
-Map getSelectableDevice() {
-    def devices = getVerifiedDevices()
-    def map = [:]
-    devices.each {
-        def value = "${it.value.name}"
-        def key = it.value.id
-        map["${key}"] = value
-    }
-    map
-}
-
-/**
-* Starts the refresh loop, making sure to keep us up-to-date with changes
-*
-*/
-private refreshDevices(){
-    log.debug "refresh device list"
-    listOfUserRemoteDevices()
-    //every 30 min
-    runIn(1800, "refreshDevices")
-}
-
-/**
-* The deviceDiscovery page used by preferences. Will automatically
-* make calls to the underlying discovery mechanisms as well as update
-* whenever new devices are discovered AND verified.
-*
-* @return a dynamicPage() object
-*/
-/******************************************************************************************************************
-DEVICE DISCOVERY AND VALIDATION
-******************************************************************************************************************/
-def deviceDiscovery()
-{
-    //    if(canInstallLabs())
-    if (1)
-    {
-        //    	userDeviceList();
-        log.debug("deviceDiscovery")
-        def refreshInterval = 3 // Number of seconds between refresh
-        int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
-            state.deviceRefreshCount = deviceRefreshCount + refreshInterval
-
-        def devices = getSelectableDevice()
-        def numFound = devices.size() ?: 0
-
-        // Make sure we get location updates (contains LAN data such as SSDP results, etc)
-        subscribeNetworkEvents()
-
-        //device discovery request every 15s
-        //        if((deviceRefreshCount % 15) == 0) {
-        //            discoverLaMetrics()
-        //        }
-
-        // Verify request every 3 seconds except on discoveries
-        if(((deviceRefreshCount % 5) == 0)) {
-            verifyDevices()
-        }
-
-        log.trace "Discovered devices: ${devices}"
-
-        return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
-            section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
-            }
-        }
-    }
-    else
-    {
-        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
-
-To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
-
-        return dynamicPage(name:"deviceDiscovery", title:"Upgrade needed!", nextPage:"", install:true, uninstall: true) {
-            section("Upgrade") {
-                paragraph "$upgradeNeeded"
-            }
-        }
-    }
-}
-
-/**
-
-/**
-* Starts a subscription for network events
-*
-* @param force If true, will unsubscribe and subscribe if necessary (Optional, default false)
-*/
-private subscribeNetworkEvents(force=false) {
-    if (force) {
-        unsubscribe()
-        state.subscribe = false
-    }
-    if(!state.subscribe) {
-        log.debug("subscribe on network events")
-        subscribe(location, null, locationHandler, [filterEvents:false])
-        //        subscribe(app, appHandler)
-        state.subscribe = true
-    }
-}
-
-private verifyDevices()
-{
-    log.debug "verify.devices"
-    def devices = getDevices();
-    for (it in devices) {
-        log.trace ("verify device ${it.value}")
-        def localIp = it?.value?.ipv4_internal;
-        def apiKey = it?.value?.api_key;
-        getAllInfoFromDevice(localIp, apiKey);
-    }
-}
-def appHandler(evt)
-{
-    log.debug("application event handler ${evt.name}")
-    if (evt.name == eventNameListOfUserDeviceParsed)
-    {
-        log.debug ("new account device list received ${evt.value}")
-        def newRemoteDeviceList
-        try {
-            newRemoteDeviceList = parseJson(evt.value)
-        } catch (e)
-        {
-            log.debug "Wrong value ${e}"
-        }
-        if (newRemoteDeviceList)
-        {
-            def remoteDevices = getDevices();
-            newRemoteDeviceList.each{deviceInfo ->
-                if (deviceInfo) {
-                    def device = remoteDevices[deviceInfo.id]?:[:];
-                        log.debug "before list ${device} ${deviceInfo} ${deviceInfo.id} ${remoteDevices[deviceInfo.id]}";
-                    deviceInfo.each() {
-                        device[it.key] = it.value;
-                    }
-                    remoteDevices[deviceInfo.id] = device;
-                } else {
-                    log.debug ("empty device info")
-                }
-            }
-            verifyDevices();
-        } else {
-            log.debug "wrong value ${newRemoteDeviceList}"
-        }
-    } else if (evt.name == getEventNameTokenRefreshed())
-    {
-        log.debug "token refreshed"
-        state.refreshToken = evt.refreshToken
-        state.authToken = evt.access_token
-    }
-}
-
-def locationHandler(evt)
-{
-    log.debug("network event handler ${evt.name}")
-    if (evt.name == "ssdpTerm")
-    {
-        log.debug "ignore ssdp"
-    } else {
-        def lanEvent = parseLanMessage(evt.description, true)
-        log.debug lanEvent.headers;
-        if (lanEvent.body)
-        {
-            log.trace "lan event ${lanEvent}";
-            def parsedJsonBody;
-            try {
-                parsedJsonBody = parseJson(lanEvent.body);
-            } catch (e)
-            {
-                log.debug ("not json responce ignore $e");
-            }
-            if (parsedJsonBody)
-            {
-                log.trace (parsedJsonBody)
-                log.debug("responce for device ${parsedJsonBody?.id}")
-                //put or post response
-                if (parsedJsonBody.success)
-                {
-
-                } else {
-                    //poll response
-                    log.debug "poll responce"
-                    log.debug ("poll responce ${parsedJsonBody}")
-                    def deviceId = parsedJsonBody?.id;
-                    if (deviceId)
-                    {
-                        def devices = getDevices();
-                        def device = devices."${deviceId}";
-
-                        device.verified = true;
-                        device.dni = [device.serial_number, device.id].join('.')
-                        device.hub = evt?.hubId;
-                        device.volume = parsedJsonBody?.audio?.volume;
-                        log.debug "verified device ${deviceId}"
-                        def childDevice = getChildDevice(device.dni)
-                        //update device info
-                        if (childDevice)
-                        {
-                            log.debug("send event to ${childDevice}")
-                            childDevice.sendEvent(name:"currentIP",value:device?.ipv4_internal);
-                            childDevice.sendEvent(name:"volume",value:device?.volume);
-                            childDevice.setOnline();
-                        }
-                        log.trace device
-                    }
-                }
-            }
-        }
-    }
-}
-
-/**
-* Adds the child devices based on the user's selection
-*
-* Uses selecteddevice defined in the deviceDiscovery() page
-*/
-def addDevice() {
-    def devices = getVerifiedDevices()
-    def devlist
-    log.trace "Adding childs"
-
-    // If only one device is selected, we don't get a list (when using simulator)
-    if (!(selecteddevice instanceof List)) {
-        devlist = [selecteddevice]
-    } else {
-        devlist = selecteddevice
-    }
-
-    log.trace "These are being installed: ${devlist}"
-    log.debug ("devlist" +  devlist)
-    devlist.each { dni ->
-        def newDevice = devices[dni];
-        if (newDevice)
-        {
-            def d = getChildDevice(newDevice.dni)
-            if(!d) {
-                log.debug ("get child devices"  + getChildDevices())
-                log.trace "concrete device ${newDevice}"
-                def deviceName = newDevice.name
-                d = addChildDevice(getNameSpace(), getDeviceName(), newDevice.dni, newDevice.hub, [label:"${deviceName}"])
-                def childDevice = getChildDevice(d.deviceNetworkId)
-                childDevice.sendEvent(name:"serialNumber", value:newDevice.serial_number)
-                log.trace "Created ${d.displayName} with id $dni"
-            } else {
-                log.trace "${d.displayName} with id $dni already exists"
-            }
-        }
-    }
-}
-
-
-//******************************************************************************************************************
-//		 					 					 			OAUTH
-//******************************************************************************************************************
-
-def getServerUrl()           		{ "https://graph.api.smartthings.com" }
-def getShardUrl()            		{ getApiServerUrl() }
-def getCallbackUrl()        		{ "https://graph.api.smartthings.com/oauth/callback" }
-def getBuildRedirectUrl()   		{ "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${shardUrl}" }
-def getApiEndpoint()        		{ "https://developer.lametric.com" }
-def getTokenUrl()					{ "${apiEndpoint}${apiTokenPath}" }
-def getAuthScope() 					{ [ "basic", "devices_read" ] }
-def getSmartThingsClientId() 		{ appSettings.clientId }
-def getSmartThingsClientSecret() 	{ appSettings.clientSecret }
-def getApiTokenPath()				{ "/api/v2/oauth2/token" }
-def getApiUserMeDevicesList()		{ "/api/v2/users/me/devices" }
-
-def toQueryString(Map m) {
-    return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
-}
-def composeScope(List scopes)
-{
-    def result = "";
-    scopes.each(){ scope ->
-        result += "${scope} "
-    }
-    if (result.length())
-    return result.substring(0, result.length() - 1);
-    return "";
-}
-
-def authPage() {
-    log.debug "authPage()"
-
-    if(!state.accessToken) { //this is to access token for 3rd party to make a call to connect app
-        state.accessToken = createAccessToken()
-    }
-
-    def description
-    def uninstallAllowed = false
-    def oauthTokenProvided = false
-
-    if(state.authToken) {
-        description = "You are connected."
-        uninstallAllowed = true
-        oauthTokenProvided = true
-    } else {
-        description = "Click to enter LaMetric Credentials"
-    }
-
-    def redirectUrl = buildRedirectUrl
-    log.debug "RedirectUrl = ${redirectUrl}"
-    // get rid of next button until the user is actually auth'd
-    if (!oauthTokenProvided) {
-        return dynamicPage(name: "auth", title: "Login", nextPage: "", uninstall:uninstallAllowed) {
-            section(){
-                paragraph "Tap below to log in to the LaMatric service and authorize SmartThings access. Be sure to scroll down on page 2 and press the 'Allow' button."
-                href url:redirectUrl, style:"embedded", required:true, title:"LaMetric", description:description
-            }
-        }
-    } else {
-        subscribeNetworkEvents()
-        listOfUserRemoteDevices()
-        return deviceDiscovery();
-    }
-}
-
-
-private refreshAuthToken() {
-    log.debug "refreshing auth token"
-
-    if(!state.refreshToken) {
-        log.warn "Can not refresh OAuth token since there is no refreshToken stored"
-    } else {
-        def refreshParams = [
-            method: 'POST',
-            uri   : apiEndpoint,
-            path  : apiTokenPath,
-            body : [grant_type: 'refresh_token', 
-                    refresh_token: "${state.refreshToken}", 
-                    client_id : smartThingsClientId,
-                    client_secret: smartThingsClientSecret,
-                    redirect_uri: callbackUrl],
-        ]
-
-        log.debug refreshParams
-
-        def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the LaMetric (Connect) SmartApp and re-enter your account login credentials."
-        //changed to httpPost
-        try {
-            def jsonMap
-            httpPost(refreshParams) { resp ->
-                if(resp.status == 200) {
-                    log.debug "Token refreshed...calling saved RestAction now! $resp.data"
-                    jsonMap = resp.data
-                    if(resp.data) {
-                        state.refreshToken = resp?.data?.refresh_token
-                        state.authToken = resp?.data?.access_token
-                        if(state.action && state.action != "") {
-                            log.debug "Executing next action: ${state.action}"
-
-                            "${state.action}"()
-
-                            state.action = ""
-                        }
-
-                    } else {
-                        log.warn ("No data in refresh token!");
-                    }
-                    state.action = ""
-                }
-            }
-        } catch (groovyx.net.http.HttpResponseException e) {
-            log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
-            log.debug e.response.data;
-            def reAttemptPeriod = 300 // in sec
-            if (e.statusCode != 401) { // this issue might comes from exceed 20sec app execution, connectivity issue etc.
-                runIn(reAttemptPeriod, "refreshAuthToken")
-            } else if (e.statusCode == 401) { // unauthorized
-                state.reAttempt = state.reAttempt + 1
-                log.warn "reAttempt refreshAuthToken to try = ${state.reAttempt}"
-                if (state.reAttempt <= 3) {
-                    runIn(reAttemptPeriod, "refreshAuthToken")
-                } else {
-                    sendPushAndFeeds(notificationMessage)
-                    state.reAttempt = 0
-                }
-            }
-        }
-    }
-}
-
-def callback() {
-    log.debug "callback()>> params: $params, params.code ${params.code}"
-
-    def code = params.code
-    def oauthState = params.state
-
-    if (oauthState == state.oauthInitState){
-
-        def tokenParams = [
-            grant_type: "authorization_code",
-            code      : code,
-            client_id : smartThingsClientId,
-            client_secret: smartThingsClientSecret,
-            redirect_uri: callbackUrl
-        ]
-        log.trace tokenParams
-        log.trace tokenUrl
-        try {
-            httpPost(uri: tokenUrl, body: tokenParams) { resp ->
-                log.debug "swapped token: $resp.data"
-                state.refreshToken = resp.data.refresh_token
-                state.authToken = resp.data.access_token
-            }
-        } catch (e)
-        {
-            log.debug "fail ${e}";
-        }
-        if (state.authToken) {
-            success()
-        } else {
-            fail()
-        }
-    } else {
-        log.error "callback() failed oauthState != state.oauthInitState"
-    }
-
-}
-
-def oauthInitUrl() {
-    log.debug "oauthInitUrl with callback: ${callbackUrl}"
-
-    state.oauthInitState = UUID.randomUUID().toString()
-
-    def oauthParams = [
-        response_type: "code",
-        scope: composeScope(authScope),
-        client_id: smartThingsClientId,
-        state: state.oauthInitState,
-        redirect_uri: callbackUrl
-    ]
-    log.debug oauthParams
-    log.debug "${apiEndpoint}/api/v2/oauth2/authorize?${toQueryString(oauthParams)}"
-
-    redirect(location: "${apiEndpoint}/api/v2/oauth2/authorize?${toQueryString(oauthParams)}")
-}
-
-def success() {
-    def message = """
-<p>Your LaMetric Account is now connected to SmartThings!</p>
-<p>Click 'Done' to finish setup.</p>
-"""
-    connectionStatus(message)
-}
-
-def fail() {
-    def message = """
-<p>The connection could not be established!</p>
-<p>Click 'Done' to return to the menu.</p>
-"""
-    connectionStatus(message)
-}
-
-def connectionStatus(message, redirectUrl = null) {
-    def redirectHtml = ""
-    if (redirectUrl) {
-        redirectHtml = """
-<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
-"""
-    }
-
-    def html = """
-<!DOCTYPE html>
-<html lang="en"><head>
-<meta charset="UTF-8">
-<meta content="width=device-width" id="viewport" name="viewport">
-<style>
-@font-face {
-font-family: 'latoRegular';
-src: url("https://developer.lametric.com/assets/fonts/lato-regular-webfont.eot");
-src: url("https://developer.lametric.com/assets/fonts/lato-regular-webfont.eot?#iefix") format("embedded-opentype"),
-url("https://developer.lametric.com/assets/fonts/lato-regular-webfont.woff") format("woff"),
-url("https://developer.lametric.com/assets/fonts/lato-regular-webfont.ttf") format("truetype"),
-url("https://developer.lametric.com/assets/fonts/lato-regular-webfont.svg#latoRegular") format("svg");
-font-style: normal;
-font-weight: normal; }
-.clearfix:after, .mobile .connect:after {
-content: "";
-clear: both;
-display: table; }
-
-.transition {
-transition: all .3s ease 0s; }
-html, body {
-height: 100%;
-}
-body{
-margin: 0;
-padding: 0;
-background: #f0f0f0;
-color: #5c5c5c;
-min-width: 1149px;
-font-family: 'latoRegular', 'Lato';
-}
-.fixed-page #page {
-min-height: 100%;
-background: url(https://developer.lametric.com/assets/smart_things/page-bg.png) 50% 0 repeat-y;
-}
-.mobile {
-min-width: 100%;
-color: #757575; }
-.mobile .wrap {
-margin: 0 auto;
-padding: 0;
-max-width: 640px;
-min-width: inherit; }
-.mobile .connect {
-width: 100%;
-padding-top: 230px;
-margin-bottom: 50px;
-text-align: center; }
-.mobile .connect img {
-max-width: 100%;
-height: auto;
-vertical-align: middle;
-display: inline-block;
-margin-left: 2%;
-border-radius: 15px; }
-.mobile .connect img:first-child {
-margin-left: 0; }
-.mobile .info {
-width: 100%;
-margin: 0 auto;
-margin-top: 50px;
-margin-bottom: 50px; }
-.mobile .info p {
-max-width: 80%;
-margin: 0 auto;
-margin-top: 50px;
-font-size: 28px;
-line-height: 50px;
-text-align: center; }
-
-@media screen and (max-width: 639px) {
-.mobile .connect{
-padding-top: 100px; }
-.mobile .wrap {
-margin: 0 20px; }
-.mobile .connect img {
-width: 16%; }
-.mobile .connect img:first-child, .mobile .connect img:last-child {
-width: 40%; }
-.mobile .info p{
-font-size: 18px;
-line-height: 24px;
-margin-top: 20px; }
-}
-</style>
-</head>
-<body class="fixed-page mobile">
-
-<div id="page">
-<div class="wrap">
-
-<div class="connect">
-<img src="https://developer.lametric.com/assets/smart_things/product.png" width="190" height="190"><img src="https://developer.lametric.com/assets/smart_things/connected.png" width="87" height="19"><img src="https://developer.lametric.com/assets/smart_things/product-1.png" width="192" height="192">
-</div>
-
-<div class="info">
-${message}
-</div>
-</div>
-</div>
-</body></html>
-"""
-    render contentType: 'text/html', data: html
-}
-
-
-
-//******************************************************************************************************************
-//		 					 					 			LOCAL API
-//******************************************************************************************************************
-
-def getLocalApiDeviceInfoPath() 		{ "/api/v2/info" }
-def getLocalApiSendNotificationPath()	{ "/api/v2/device/notifications" }
-def getLocalApiIndexPath()				{ "/api/v2/device" }
-def getLocalApiUser()					{ "dev" }
-
-
-void requestDeviceInfo(localIp, apiKey)
-{
-    if (localIp && apiKey)
-    {
-        log.debug("request info ${localIp}");
-        def command = new physicalgraph.device.HubAction([
-            method: "GET",
-            path: localApiDeviceInfoPath,
-            headers: [
-                HOST: "${localIp}:8080",
-                Authorization: "Basic ${"${localApiUser}:${apiKey}".bytes.encodeBase64()}"
-            ]])
-        log.debug command
-        sendHubCommand(command)
-        command;
-    } else {
-        log.debug ("Unknown api key or ip address ${localIp} ${apiKey}")
-    }
-}
-
-def sendNotificationMessageToDevice(dni, data)
-{
-    log.debug "send something"
-    def device = resolveDNI2Device(dni);
-    def localIp = device?.ipv4_internal;
-    def apiKey = device?.api_key;
-    if (localIp && apiKey)
-    {
-        log.debug "send notification message to device ${localIp}:8080 ${data}"
-        sendHubCommand(new physicalgraph.device.HubAction([
-            method: "POST",
-            path: localApiSendNotificationPath,
-            body: data,
-            headers: [
-                HOST: "${localIp}:8080",
-                Authorization: "Basic ${"${localApiUser}:${apiKey}".bytes.encodeBase64()}",
-                "Content-type":"application/json",
-                "Accept":"application/json"
-            ]]))
-    }
-}
-
-def getAllInfoFromDevice(localIp, apiKey)
-{
-    log.debug "send something"
-    if (localIp && apiKey)
-    {
-    	def hubCommand = new physicalgraph.device.HubAction([
-            method: "GET",
-            path: localApiIndexPath+"?fields=info,wifi,volume,bluetooth,id,name,mode,model,serial_number,os_version",
-            headers: [
-                HOST: "${localIp}:8080",
-                Authorization: "Basic ${"${localApiUser}:${apiKey}".bytes.encodeBase64()}"
-            ]])
-        log.debug "sending request ${hubCommand}"
-        sendHubCommand(hubCommand)
-    }
-}
-//******************************************************************************************************************
-//		 					 					 DEVICE HANDLER COMMANDs API
-//******************************************************************************************************************
-
-def resolveDNI2Device(dni)
-{
-    getDevices().find { it?.value?.dni == dni }?.value;
-}
-
-def requestRefreshDeviceInfo (dni)
-{
-    log.debug "device ${dni} request refresh";
-    //	def devices = getDevices();
-    //    def concreteDevice = devices[dni];
-    //    requestDeviceInfo(conreteDevice);
-}
-
-private poll(dni) {
-    def device = resolveDNI2Device(dni);
-    def localIp = device?.ipv4_internal;
-    def apiKey = device?.api_key;
-    getAllInfoFromDevice(localIp, apiKey);
-}
-
-//******************************************************************************************************************
-//		 					 					 			CLOUD METHODS
-//******************************************************************************************************************
-
-
-void listOfUserRemoteDevices()
-{
-    log.debug "get user device list"
-    def deviceList = []
-    if (state.accessToken)
-    {
-        def deviceListParams = [
-            uri: apiEndpoint,
-            path: apiUserMeDevicesList,
-            headers: ["Content-Type": "text/json", "Authorization": "Bearer ${state.authToken}"]
-        ]
-        log.debug "making request ${deviceListParams}"
-        def result;
-        try {
-            httpGet(deviceListParams){ resp ->
-                if (resp.status == 200)
-                {
-                    deviceList = resp.data
-
-                    def remoteDevices = getDevices();
-                    for (deviceInfo in deviceList) {
-                        if (deviceInfo)
-                        {
-                            def device = remoteDevices."${deviceInfo.id}"?:[:];
-                                log.debug "before list ${device} ${deviceInfo} ${deviceInfo.id} ${remoteDevices[deviceInfo.id]}";
-                            for (it in deviceInfo ) {
-                                device."${it.key}" = it.value;
-                            }
-                            remoteDevices."${deviceInfo.id}" = device;
-                        } else {
-                            log.debug ("empty device info")
-                        }
-                    }
-                    verifyDevices();
-                } else {
-                    log.debug "http status: ${resp.status}"
-                }
-            }
-        } catch (groovyx.net.http.HttpResponseException e)
-        {
-            log.debug("failed to get device list ${e}")
-            def status = e.response.status
-            if (status == 401) {
-                state.action = "refreshDevices"
-                log.debug "Refreshing your auth_token!"
-                refreshAuthToken()
-            }
-            return;
-        }
-    } else {
-        log.debug ("no access token to fetch user device list");
-        return;
-    }
-}

smartapps/com-lametric/lametric-notifier.src/lametric-notifier.groovy

@@ -1,536 +0,0 @@
-/**
- *  Lametric Notifier
- *
- *  Copyright 2016 Smart Atoms Ltd.
- *  Author: Mykola Kirichuk
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- import groovy.json.JsonOutput
- 
-definition(
-    name: "LaMetric Notifier",
-    namespace: "com.lametric",
-    author: "Mykola Kirichuk",
-    description: "Allows you to send notifications to your LaMetric Time when something happens in your home to notify the whole family.",
-    category: "Family",
-    iconUrl: "https://developer.lametric.com/assets/smart_things/weather_60.png",
-    iconX2Url: "https://developer.lametric.com/assets/smart_things/weather_120.png",
-    iconX3Url: "https://developer.lametric.com/assets/smart_things/weather_120.png")
-
-
-preferences {
-	page(name: "mainPage", title: "Show a message on your LaMetric when something happens", install: true, uninstall: true)
-	page(name: "timeIntervalInput", title: "Only during a certain time") {
-		section {
-			input "starting", "time", title: "Starting", required: false
-			input "ending", "time", title: "Ending", required: false
-		}
-	}
-}
-
-
-
-           
-def getSoundList() {
-	[	
-    	"none":"No Sound",
-        "car" : "Car",
-        "cash" : "Cash Register",
-        "cat" : "Cat Meow",
-        "dog" : "Dog Bark",
-        "dog2" : "Dog Bark 2",
-        "letter_email" : "The mail has arrived",
-        "knock-knock" : "Knocking Sound",
-        "bicycle" : "Bicycle",
-        "negative1" : "Negative 1",
-        "negative2" : "Negative 2",
-        "negative3" : "Negative 3",
-        "negative4" : "Negative 4",
-        "negative5" : "Negative 5",
-        "lose1" : "Lose 1",
-        "lose2" : "Lose 2",
-        "energy" : "Energy",
-        "water1" : "Water 1",
-        "water2" : "Water 2",
-        "notification" : "Notification 1",
-        "notification2" : "Notification 2",
-        "notification3" : "Notification 3",
-        "notification4" : "Notification 4",
-        "open_door" : "Door unlocked",
-        "win" : "Win",
-        "win2" : "Win 2", 
-        "positive1" : "Positive 1",
-        "positive2" : "Positive 2",
-        "positive3" : "Positive 3",
-        "positive4" : "Positive 4",
-        "positive5" : "Positive 5",
-        "positive6" : "Positive 6",
-        "statistic" : "Page turning",
-        "wind" : "Wind",
-        "wind_short" : "Small Wind",
-    ] 
-}
-
-def getControlToAttributeMap(){
-	[
-        "motion": "motion.active",
-        "contact": "contact.open",
-        "contactClosed": "contact.close",
-        "acceleration": "acceleration.active",
-        "mySwitch": "switch.on",
-        "mySwitchOff": "switch.off",
-        "arrivalPresence": "presence.present",
-        "departurePresence": "presence.not present",
-        "smoke": "smoke.detected",
-        "smoke1": "smoke.tested",
-        "water": "water.wet",
-        "button1": "button.pushed",
-        "triggerModes": "mode",
-        "timeOfDay": "time",
-	]
-}
-                
-def getPriorityList(){
-	[
-    	"warning":"Not So Important (may be ignored at night)",
-        "critical": "Very Important"
-    ]
-}
-
-def getIconsList(){
-	state.icons = state.icons?:["1":"default"]
-}
-
-
-def getIconLabels() {
-	state.iconLabels = state.iconLabels?:["1":"Default Icon"]
-}
-
-def getSortedIconLabels() {
-	state.iconLabels = state.iconLabels?:["1":"Default Icon"]
-    state.iconLabels.sort {a,b -> a.key.toInteger() <=> b.key.toInteger()};
-}
-def getLametricHost() { "https://developer.lametric.com" }
-def getDefaultIconData() { """data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAgAAAAICAYAAADED76LAAAAe0lEQVQYlWNUVFBgYGBgYNi6bdt/BiTg7eXFyMDAwMCELBmz7z9DzL7/KBoYr127BpeEgbV64QzfRVYxMDAwMLAgSy5xYoSoeMPAwPkmjOG7yCqIgjf8WVC90xnQAdwKj7OZcMGD8m/hVjDBXLvDGKEbJunt5cXISMibAF0FMibYF7nMAAAAAElFTkSuQmCC""" }
-
-def mainPage() {
-    def iconRequestOptions = [headers: ["Accept": "application/json"],
-						    uri: "${lametricHost}/api/v2/icons", query:["fields":"id,title,type,code", "order":"title"]]
-
-    	def icons = getIconsList();
-        def iconLabels = getIconLabels();
-        if (icons?.size() <= 2)
-        {
-	        log.debug iconRequestOptions
-            try {
-				httpGet(iconRequestOptions) { resp ->
-                   	int i = 2;
-                    resp.data.data.each(){
-                        def iconId = it?.id
-                        def iconType = it?.type
-                        def prefix = "i"
-                        if (iconId)
-                        {
-                            if (iconType == "movie")
-                            {
-                                prefix = "a"
-                            }
-                            def iconurl = "${lametricHost}/content/apps/icon_thumbs/${prefix}${iconId}_icon_thumb_big.png";
-                            icons["$i"] = it.code
-                            iconLabels["$i"] = it.title
-                        } else {
-                        	log.debug "wrong id"
-                        }
-                        ++i;
-                    }
-                }
-            } catch (e)
-            {
-                log.debug "fail ${e}";
-            }
-        }
-	dynamicPage(name: "mainPage") {
-		def anythingSet = anythingSet()
-        def notificationMessage = defaultNotificationMessage();
-        log.debug "set $anythingSet"
-		if (anythingSet) {
-			section("Show message when"){
-				ifSet "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true , submitOnChange:true
-				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true, submitOnChange:true
-				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true, submitOnChange:true
-				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true, submitOnChange:true
-				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true, submitOnChange:true
-				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true, submitOnChange:true
-				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true, submitOnChange:true
-				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true, submitOnChange:true
-				ifSet "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true, submitOnChange:true
-				ifSet "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true, submitOnChange:true
-				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
-				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true, submitOnChange:true
-				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false, submitOnChange:true
-			}
-		}
-		def hideable = anythingSet || app.installationState == "COMPLETE"
-		def sectionTitle = anythingSet ? "Select additional triggers" : "Show message when..."
-
-		section(sectionTitle, hideable: hideable, hidden: true){
-			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true, submitOnChange:true
-			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true, submitOnChange:true
-			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true, submitOnChange:true
-			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true, submitOnChange:true
-			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true, submitOnChange:true
-			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true, submitOnChange:true
-			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true, submitOnChange:true
-			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true, submitOnChange:true
-			ifUnset "smoke", "capability.smokeDetector", title: "Smoke Detected", required: false, multiple: true, submitOnChange:true
-			ifUnset "water", "capability.waterSensor", title: "Water Sensor Wet", required: false, multiple: true, submitOnChange:true
-			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
-			ifUnset "triggerModes", "mode", title: "System Changes Mode", description: "Select mode(s)", required: false, multiple: true, submitOnChange:true
-			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false, submitOnChange:true
-		}
-
-		section (title:"Select LaMetrics"){
-			input "selectedDevices", "capability.notification", required: true, multiple:true
-		}
-        section (title: "Configure message"){
-        	input "defaultMessage", "bool", title: "Use Default Text:\n\"$notificationMessage\"", required: false, defaultValue: true, submitOnChange:true
-	        def showMessageInput = (settings["defaultMessage"] == null || settings["defaultMessage"] == true) ? false : true;
-			if (showMessageInput)
-        	{
-             	input "customMessage","text",title:"Use Custom Text", defaultValue:"", required:false, multiple: false
-        	}
-        	input "selectedIcon", "enum", title: "With Icon", required: false, multiple: false, defaultValue:"1", options: getSortedIconLabels()
-   			input "selectedSound", "enum", title: "With Sound", required: true, defaultValue:"none" , options: soundList
-			input "showPriority", "enum", title: "Is This Notification Very Important?", required: true, multiple:false, defaultValue: "warning", options: priorityList
-		}
-		section("More options", hideable: true, hidden: true) {
-			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
-			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
-				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
-			if (settings.modes) {
-            	input "modes", "mode", title: "Only when mode is", multiple: true, required: false
-            }
-		}
-		section([mobileOnly:true]) {
-			label title: "Assign a name", required: false
-			mode title: "Set for specific mode(s)", required: false
-		}
-	}
-}
-
-private songOptions() {
-		log.trace "song option"
-	// Make sure current selection is in the set
-
-	def options = new LinkedHashSet()
-	if (state.selectedSong?.station) {
-		options << state.selectedSong.station
-	}
-	else if (state.selectedSong?.description) {
-		// TODO - Remove eventually? 'description' for backward compatibility
-		options << state.selectedSong.description
-	}
-
-	// Query for recent tracks
-	def states = sonos.statesSince("trackData", new Date(0), [max:30])
-	def dataMaps = states.collect{it.jsonValue}
-	options.addAll(dataMaps.collect{it.station})
-
-	log.trace "${options.size()} songs in list"
-	options.take(20) as List
-}
-
-private anythingSet() {
-	for (it in controlToAttributeMap) {
-    	log.debug ("key ${it.key} value ${settings[it.key]} ${settings[it.key]?true:false}")
-		if (settings[it.key]) {
-	        log.debug constructMessageFor(it.value, settings[it.key])
-			return true
-		}
-	}
-	return false
-}
-
-def defaultNotificationMessage(){
-	def message = "";
-	for (it in controlToAttributeMap)  {
-		if (settings[it.key]) {
-	        message = constructMessageFor(it.value, settings[it.key])
-            break;
-		}
-	}
-	return message;
-}
-
-def constructMessageFor(group, device)
-{
-	log.debug ("$group $device")
-	def message;
-    def firstDevice;
-    if (device instanceof List)
-    {
-    	firstDevice = device[0];
-    } else {
-    	firstDevice = device;
-    }
-    switch(group)
-    {
-    	case "motion.active":
-        	message = "Motion detected by $firstDevice.displayName at $location.name"
-        break;
-        case "contact.open":
-        	message = "Openning detected by $firstDevice.displayName at $location.name"
-        break;
-		case "contact.closed":
-        	message = "Closing detected by $firstDevice.displayName at $location.name"
-        break;
-        case "acceleration.active":
-        	message = "Acceleration detected by $firstDevice.displayName at $location.name"
-        break;
-        case "switch.on":
-        	message = "$firstDevice.displayName turned on at $location.name"
-        break;
-        case "switch.off":
-        	message = "$firstDevice.displayName turned off at $location.name"
-        break;
-        case "presence.present":
-	        message = "$firstDevice.displayName detected arrival at $location.name"
-        break;
-        case "presence.not present":
-	        message = "$firstDevice.displayName detected departure at $location.name"
-        break;
-        case "smoke.detected":
-        	message = "Smoke detected by $firstDevice.displayName at $location.name"
-        break;
-         case "smoke.tested":
-        	message = "Smoke tested by $firstDevice.displayName at $location.name"
-        break;
-        case "water.wet":
-        	message = "Dampness detected by $firstDevice.displayName at $location.name"
-        break;
-        case "button.pushed":
-	        message = "$firstDevice.displayName pushed at $location.name"
-		break;
-        case "time":
-        break;
-//        case "mode":
-//        	message = "Mode changed to ??? at $location.name"
-        break;
-    }
-    return message;
-}
-
-private ifUnset(Map options, String name, String capability) {
-	if (!settings[name]) {
-		input(options, name, capability)
-	}
-}
-
-private ifSet(Map options, String name, String capability) {
-	if (settings[name]) {
-		input(options, name, capability)
-	}
-}
-
-def installed() {
-
-	log.debug "Installed with settings: ${settings}"
-	subscribeToEvents()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	unschedule()
-	subscribeToEvents()
-}
-
-def subscribeToEvents() {
-	log.trace "subscribe to events"
-    log.debug "${contact} ${contactClosed} ${mySwitch} ${mySwitchOff} ${acceleration}${arrivalPresence} ${button1}"
-//	subscribe(app, appTouchHandler)
-	subscribe(contact, "contact.open", eventHandler)
-	subscribe(contactClosed, "contact.closed", eventHandler)
-	subscribe(acceleration, "acceleration.active", eventHandler)
-	subscribe(motion, "motion.active", eventHandler)
-	subscribe(mySwitch, "switch.on", eventHandler)
-	subscribe(mySwitchOff, "switch.off", eventHandler)
-	subscribe(arrivalPresence, "presence.present", eventHandler)
-	subscribe(departurePresence, "presence.not present", eventHandler)
-	subscribe(smoke, "smoke.detected", eventHandler)
-	subscribe(smoke, "smoke.tested", eventHandler)
-	subscribe(smoke, "carbonMonoxide.detected", eventHandler)
-	subscribe(water, "water.wet", eventHandler)
-	subscribe(button1, "button.pushed", eventHandler)
-
-	if (triggerModes) {
-		subscribe(location, modeChangeHandler)
-	}
-
-	if (timeOfDay) {
-		schedule(timeOfDay, scheduledTimeHandler)
-	}
-}
-
-def eventHandler(evt) {
-	log.trace "eventHandler(${evt?.name}: ${evt?.value})"
-    def name = evt?.name;
-    def value = evt?.value;
-    
-	if (allOk) {
-			log.trace "allOk"
- 			takeAction(evt)
-		}
-		else {
-			log.debug "Not taking action because it was already taken today"
-		}
-}
-def modeChangeHandler(evt) {
-	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
-	if (evt?.value in triggerModes) {
-		eventHandler(evt)
-	}
-}
-
-def scheduledTimeHandler() {
-	eventHandler(null)
-}
-
-def appTouchHandler(evt) {
-	takeAction(evt)
-}
-
-private takeAction(evt) {
-
-	log.trace "takeAction()"
-	def messageToShow
-    if (defaultMessage)
-    {
-    	messageToShow = constructMessageFor("${evt.name}.${evt.value}", evt.device);
-    } else {
-    	messageToShow = customMessage;
-    }
-	if (messageToShow)
-    {
-    	log.debug "text ${messageToShow}"
-    	def notification = [:];
-        def frame1 = [:];
-        frame1.text = messageToShow;
-        if (selectedIcon != "1")
-        {
-        	frame1.icon = state.icons[selectedIcon];
-        } else {
-        	frame1.icon = defaultIconData;
-        }
-        def soundId = sound;
-        def sound = [:];
-        sound.id = selectedSound;
-        sound.category = "notifications";
-        def frames = [];
-        frames << frame1;
-        def model = [:];
-        model.frames = frames;
-        if (selectedSound != "none")
-        {
-        	model.sound = sound;
-        }
-        notification.model = model;
-        notification.priority = showPriority;
-        def serializedData = new JsonOutput().toJson(notification);
-
-        selectedDevices.each { lametricDevice ->
-            log.trace "send notification to ${lametricDevice} ${serializedData}"
-        	lametricDevice.deviceNotification(serializedData)
-        }
-    } else {
-    	log.debug "No message to show"
-    }
-	
-	log.trace "Exiting takeAction()"
-}
-
-private frequencyKey(evt) {
-	"lastActionTimeStamp"
-}
-
-private dayString(Date date) {
-	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
-	if (location.timeZone) {
-		df.setTimeZone(location.timeZone)
-	}
-	else {
-		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-	}
-	df.format(date)
-}
-
-private oncePerDayOk(Long lastTime) {
-	def result = true
-	if (oncePerDay) {
-		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
-		log.trace "oncePerDayOk = $result"
-	}
-	result
-}
-
-// TODO - centralize somehow
-private getAllOk() {
-	modeOk && daysOk && timeOk
-}
-
-private getModeOk() {
-	def result = !modes || modes.contains(location.mode)
-	log.trace "modeOk = $result"
-	result
-}
-
-private getDaysOk() {
-	def result = true
-	if (days) {
-		def df = new java.text.SimpleDateFormat("EEEE")
-		if (location.timeZone) {
-			df.setTimeZone(location.timeZone)
-		}
-		else {
-			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-		}
-		def day = df.format(new Date())
-		result = days.contains(day)
-	}
-	log.trace "daysOk = $result"
-	result
-}
-
-private getTimeOk() {
-	def result = true
-	if (starting && ending) {
-		def currTime = now()
-		def start = timeToday(starting, location?.timeZone).time
-		def stop = timeToday(ending, location?.timeZone).time
-		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
-	}
-	log.trace "timeOk = $result"
-	result
-}
-
-private hhmm(time, fmt = "h:mm a")
-{
-	def t = timeToday(time, location.timeZone)
-	def f = new java.text.SimpleDateFormat(fmt)
-	f.setTimeZone(location.timeZone ?: timeZone(time))
-	f.format(t)
-}
-
-private getTimeLabel()
-{
-	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
-}

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
 
 		try {
-			switch(detail.type) {
+			switch(detail?.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state.deviceDetail[deviceId]
-		def data = state.deviceState[deviceId]
-		def child = children.find { it.deviceNetworkId == deviceId }
+		def detail = state?.deviceDetail[deviceId]
+		def data = state?.deviceState[deviceId]
+		def child = children?.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail.type) {
+		switch(detail?.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,6 +39,7 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
+	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -47,6 +48,9 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
+				if (dimmersContainUnsupportedDevices()) {
+					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
+				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -71,6 +75,31 @@ def rootPage() {
 	}
 }
 
+def unsupportedDevicesPage() {
+
+	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
+
+	dynamicPage(name: "unsupportedDevicesPage") {
+		if (unsupportedDimmers) {
+			section("These devices do not support the setLevel command") {
+				unsupportedDimmers.each {
+					paragraph deviceLabel(it)
+				}
+			}
+			section {
+				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
+			}
+			section {
+				paragraph "If you think there is a mistake here, please contact support."
+			}
+		} else {
+			section {
+				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
+			}
+		}
+	}
+}
+
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -208,7 +237,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to") {
+			input("recipients", "contact", title: "Send notifications to", required: false) {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}
@@ -528,14 +557,16 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
-			def canChangeColors = hasSetColorCommand(dimmer)
 
-			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
-
-			if (shouldChangeColors && canChangeColors) {
-				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
-			} else {
+			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
+				def hue = getHue(dimmer, nextLevel)
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
+				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
+			} else if (hasSetLevelCommand(dimmer)) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
 				dimmer.setLevel(nextLevel)
+			} else {
+				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
 			}
 
 		}
@@ -689,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis()
+	def totalRunTime = totalRunTimeMillis() ?: 1
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 
@@ -817,24 +848,21 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
+private dimmersContainUnsupportedDevices() {
+	def found = dimmers.find { hasSetLevelCommand(it) == false }
+	return found != null
+}
+
 private hasSetLevelCommand(device) {
-	def isDimmer = false
-	device.supportedCommands.each {
-		if (it.name.contains("setLevel")) {
-			isDimmer = true
-		}
-	}
-	return isDimmer
+	return hasCommand(device, "setLevel")
 }
 
 private hasSetColorCommand(device) {
-	def hasColor = false
-	device.supportedCommands.each {
-		if (it.name.contains("setColor")) {
-			hasColor = true
-		}
-	}
-	return hasColor
+	return hasCommand(device, "setColor")
+}
+
+private hasCommand(device, String command) {
+	return (device.supportedCommands.find { it.name == command } != null)
 }
 
 private dimmersWithSetColorCommand() {
@@ -1073,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) {
+            if (body instanceof java.util.Map) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-    
+
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-    
+
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)   
+        if (huesettings.saturation != null)
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-    
-    // Default behavior is to turn light on 
+
+    // Default behavior is to turn light on
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else 
+        else
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,29 +658,73 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-		if (device) {
-        	if (device.hasCommand("$command")) {
-                if (arguments) {
-                    device."$command"(*arguments)
-                } else {
-                    device."$command"()
-                }
-                render status: 204, data: "{}"
-           	} else {
-				render status: 404, data: '{"msg": "Command not supported by this Device"}'
-			}
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
-		}
+    if (device) {
+        if (validateCommand(device, command)) {
+            if (arguments) {
+                device."$command"(*arguments)
+            } else {
+                device."$command"()
+            }
+            render status: 204, data: "{}"
+        } else {
+          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
+        }
+    } else {
+      render status: 404, data: '{"msg": "Device not found"}'
+    }
+  }
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(device)
+	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
 	}
 }
 
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(device) {
+    def capName = ""
+    if (switches.find{it.id == device.id})
+			capName = "Switch"
+		else if (alarms.find{it.id == device.id})
+			capName = "Alarm"
+		else if (locks.find{it.id == device.id})
+			capName = "Lock"
+    log.trace "Device: $device - Capability Name: $capName"
+		return capName
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -779,18 +823,33 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-	sendHubCommand(new physicalgraph.device.HubAction(
-		method: "POST",
-		path: path,
-		headers: [
-			"Host": host,
-			"Content-Type": "application/json"
-		],
-		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-	))
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
+  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+  	sendHubCommand(new physicalgraph.device.HubAction(
+  		method: "POST",
+  		path: path,
+  		headers: [
+  			"Host": host,
+  			"Content-Type": "application/json"
+  		],
+  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+  	))
+  } else {
+    def params = [
+      uri: callbackUrl,
+      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+    ]
+    try {
+        log.debug "Sending data to Harmony Cloud: $params"
+        httpPostJson(params) { resp ->
+            log.debug "Harmony Cloud - Response: ${resp.status}"
+        }
+    } catch (e) {
+        log.error "Harmony Cloud - Something went wrong: $e"
+    }
+  }
 }
 
 def listHubs() {