MSA-1338: I believe this should replace the current app on the app store "TCP Bulbs (connect)" as it's a more reliable integration.

I did a couple of things to make this more reliable:
1.  I re-fetch the authorization token every 5 minutes
2.  If a request fails, I again re-try to fetch the token and re-submit the request
3.  I try again on 400 errors in addition to 500 and 401 errors.

Code is all open source under Apache 2.0 license hosted at github at https://github.com/mmacaula/tcp-bulbs

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -403,21 +403,39 @@ def refresh() {
 
 	if (device.getDataValue("manufacturer") == "SmartThings") {
 		log.debug "Refreshing Values for manufacturer: SmartThings "
-		/* These values of Motion Threshold Multiplier(0x01) and Motion Threshold (0x0276)
-            seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
-            Separating these out in a separate if-else because I do not want to touch Centralite part
-            as of now.
-        */
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x01, [mfgCode: manufacturerCode])
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0002, 0x21, 0x0276, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* These values of Motion Threshold Multiplier(01) and Motion Threshold (7602)
+				seem to be giving pretty accurate results for the XYZ co-ordinates for this manufacturer.
+				Separating these out in a separate if-else because I do not want to touch Centralite part
+				as of now.
+			*/
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 2 0x21 {7602}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	} else {
-		refreshCmds += zigbee.writeAttribute(0xFC02, 0x0000, 0x20, 0x02, [mfgCode: manufacturerCode])
+		refreshCmds = refreshCmds + [
+			/* sensitivity - default value (8) */
+			"zcl mfg-code ${manufacturerCode}", "delay 200",
+			"zcl global write 0xFC02 0 0x20 {02}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 1", "delay 400",
+		]
 	}
 
 	//Common refresh commands
-	refreshCmds += zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020) +
-			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode])
+	refreshCmds = refreshCmds + [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global read 0xFC02 0x0010",
+		"send 0x${device.deviceNetworkId} 1 1","delay 400"
+	]
 
 	return refreshCmds + enrollResponse()
 }
@@ -425,15 +443,38 @@ def refresh() {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 
-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
-			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
-			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
+	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
+		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+		]
 
 	return configCmds + refresh()
 }

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98,0x86,0x72,0x5A,0x85,0x59,0x73,0x80,0x71,0x31,0x70,0x84,0x7A" // Vision Motion
 	}
 
 	// simulator metadata
@@ -264,9 +263,5 @@ def retypeBasedOnMSR() {
 			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
 			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Vision Motion Sensor Plus (SG)"
-			setDeviceType("Vision Motion Sensor Plus (SG)")
-			break
 	}
 }

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -21,13 +21,6 @@ metadata {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
-
-		fingerprint mfr: "011F", prod: "0001", model: "0001", deviceJoinName: "Schlage Motion Sensor"  // Schlage motion
-		fingerprint mfr: "014A", prod: "0001", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion
-		fingerprint mfr: "014A", prod: "0004", model: "0001", deviceJoinName: "Ecolink Motion Sensor"  // Ecolink motion +
-		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
-		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
-		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
 	}
 
 	simulator {
@@ -132,9 +125,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	}
 	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
 		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result << response("delay 1200")
 	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	result
 }
 

devicetypes/wackford/tcp-bulb.src/tcp-bulb.groovy

@@ -13,14 +13,14 @@
  *				Documented Header
  *
  *  Change 2:	2014-03-15
- *				Fixed bug where we weren't coming on when changing
+ *				Fixed bug where we weren't coming on when changing 
  *				levels down.
  *
- *  Change 3:   2014-04-02 (lieberman)
+ *  Change 3:   2014-04-02 (lieberman)	
  *              Changed sendEvent() to createEvent() in parse()
  *
  *  Change 4:	2014-04-12 (wackford)
- *				Added current power usage tile
+ *				Added current power usage tile 
  *
  *  Change 5:	2014-09-14 (wackford)
  *				a. Changed createEvent() to sendEvent() in parse() to
@@ -33,7 +33,7 @@
  *				b. added refresh on udate
  *				c. added uninstallFromChildDevice to handle removing from settings
  *				d. Changed to allow bulb to 100%, was possible to get past logic at 99
- *
+ * 
  *  Change 7:	2014-11-09 (wackford)
  *				a. Added bulbpower calcs to device. TCP is broken
  *				b. Changed to set dim level first then on. Much easier on the eys coming from bright.
@@ -42,7 +42,7 @@
  *                       Code
  *****************************************************************
  */
-// for the UI
+ // for the UI
 metadata {
 	definition (name: "TCP Bulb", namespace: "wackford", author: "Todd Wackford") {
 		capability "Switch"
@@ -52,28 +52,26 @@ metadata {
 		capability "Switch Level"
 
 		attribute "stepsize", "string"
-
+        
 		command "levelUp"
 		command "levelDown"
-		command "on"
-		command "off"
-		command "setBulbPower"
+        command "on"
+        command "off"
+        command "setBulbPower"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
-
-	preferences {
+    
+    preferences {
 		input "stepsize", "number", title: "Step Size", description: "Dimmer Step Size", defaultValue: 5
 	}
-
+    
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "on", label:'${name}', action:"off", icon:"st.switches.light.on", backgroundColor:"#79b821"
+			state "off", label:'${name}', action:"on", icon:"st.switches.light.off", backgroundColor:"#ffffff"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
@@ -84,15 +82,15 @@ metadata {
 		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
 			state "level", label: 'Level ${currentValue}%'
 		}
-		standardTile("lUp", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
-			state "default", action:"levelUp", icon:"st.illuminance.illuminance.bright"
-		}
-		standardTile("lDown", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
-			state "default", action:"levelDown", icon:"st.illuminance.illuminance.light"
-		}
-		valueTile( "power", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "power", label: '${currentValue} Watts'
-		}
+        standardTile("lUp", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
+            state "default", action:"levelUp", icon:"st.illuminance.illuminance.bright"
+        }
+        standardTile("lDown", "device.switchLevel", inactiveLabel: false,decoration: "flat", canChangeIcon: false) {
+            state "default", action:"levelDown", icon:"st.illuminance.illuminance.light"
+        }
+        valueTile( "power", "device.power", inactiveLabel: false, decoration: "flat") {
+            state "power", label: '${currentValue} Watts'
+        }
 
 		main(["switch"])
 		details(["switch", "lUp", "lDown", "levelSliderControl", "level" , "power", "refresh" ])
@@ -103,10 +101,10 @@ metadata {
 def parse(description) {
 	//log.debug "parse() - $description"
 	def results = []
-
-	if ( description == "updated" )
-		return
-
+	
+    if ( description == "updated" )
+    	return
+        
 	if (description?.name && description?.value)
 	{
 		results << createEvent(name: "${description?.name}", value: "${description?.value}")
@@ -116,73 +114,73 @@ def parse(description) {
 // handle commands
 def setBulbPower(value) {
 	state.bulbPower = value
-	log.debug "In child with bulbPower of ${state.bulbPower}"
+    log.debug "In child with bulbPower of ${state.bulbPower}"
 }
 
 def on() {
 	log.debug "Executing 'on'"
-	sendEvent(name:"switch",value:on)
+    sendEvent(name:"switch",value:on)
 	parent.on(this)
 
 	def levelSetting = device.latestValue("level") as Float ?: 1.0
-	def bulbPowerMax = device.latestValue("setBulbPower") as Float
-	def calculatedPower = bulbPowerMax * (levelSetting / 100)
-	sendEvent(name: "power", value: calculatedPower.round(1))
-
-	if (device.latestValue("level") == null) {
+    //def bulbPowerMax = device.latestValue("setBulbPower") as Float
+    //def calculatedPower = bulbPowerMax * (levelSetting / 100)
+    //sendEvent(name: "power", value: calculatedPower.round(1))
+    
+    if (device.latestValue("level") == null) {
 		sendEvent( name: "level", value: 1.0 )
-	}
+    }
 }
 
 def off() {
 	log.debug "Executing 'off'"
-	sendEvent(name:"switch",value:off)
+    sendEvent(name:"switch",value:off)
 	parent.off(this)
-	sendEvent(name: "power", value: 0.0)
+    sendEvent(name: "power", value: 0.0)
 }
 
 def levelUp() {
 	def level = device.latestValue("level") as Integer ?: 0
-	def step = state.stepsize as float
-
-	level+= step
-
-	if ( level > 100 )
-		level = 100
-
-	setLevel(level)
+    def step = state.stepsize as float
+    
+    level+= step
+    
+    if ( level > 100 )
+    	level = 100
+    
+    setLevel(level)
 }
 
 def levelDown() {
 	def level = device.latestValue("level") as Integer ?: 0
-	def step = state.stepsize as float
-
-	level-= step
-
+    def step = state.stepsize as float
+    
+    level-= step
+    
 	if ( level <  1 )
-		level = 1
-
-	setLevel(level)
+    	level = 1
+    
+    setLevel(level)
 }
 
 def setLevel(value) {
 	log.debug "in setLevel with value: ${value}"
 	def level = value as Integer
-
-	sendEvent( name: "level", value: level )
-	sendEvent( name: "switch.setLevel", value:level )
+    
+    sendEvent( name: "level", value: level )
+    sendEvent( name: "switch.setLevel", value:level )
 	parent.setLevel( this, level )
+    
 
-
-	if (( level > 0 ) && ( level <= 100 ))
-		on()
-	else
-		off()
-
-	def levelSetting = level as float
-	def bulbPowerMax = device.latestValue("setBulbPower") as float
-	def calculatedPower = bulbPowerMax * (levelSetting / 100)
-	sendEvent(name: "power", value: calculatedPower.round(1))
+    if (( level > 0 ) && ( level <= 100 ))
+    	on()
+    else
+    	off()
+    
+    //def levelSetting = level as float
+    //def bulbPowerMax = device.latestValue("setBulbPower") as float
+    //def calculatedPower = bulbPowerMax * (levelSetting / 100)
+    //sendEvent(name: "power", value: calculatedPower.round(1))
 }
 
 def poll() {
@@ -200,29 +198,29 @@ def installed() {
 }
 
 def updated() {
-	initialize()
-	refresh()
+    initialize()
+    refresh()
 }
 
 def initialize() {
 	if ( !settings.stepsize )
-		state.stepsize = 10 //set the default stepsize
-	else
-		state.stepsize = settings.stepsize
+        state.stepsize = 10 //set the default stepsize
+    else
+    	state.stepsize = settings.stepsize
 }
 
 /*******************************************************************************
- Method :uninstalled(args)
- (args) :none
- returns:Nothing
- ERRORS :No error handling is done
-
- Purpose:This is standard ST method.
- Gets called when "remove" is selected in child device "preferences"
- tile. It also get's called when "deleteChildDevice(child)" is
- called from parent service manager app.
- *******************************************************************************/
+	Method :uninstalled(args)
+    (args) :none
+    returns:Nothing
+    ERRORS :No error handling is done
+    
+    Purpose:This is standard ST method.
+    		Gets called when "remove" is selected in child device "preferences" 
+    		tile. It also get's called when "deleteChildDevice(child)" is 
+            called from parent service manager app.
+*******************************************************************************/
 def uninstalled() {
 	log.debug "Executing 'uninstall' in device type"
-	parent.uninstallFromChildDevice(this)
+    parent.uninstallFromChildDevice(this)
 }

smartapps/cloudcar/cloudcar.src/cloudcar.groovy

@@ -1,333 +0,0 @@
-/**
- *  CCTest
- *
- *  Copyright 2016 Kuldip
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "CloudCar",
-    namespace: "CloudCar",
-    author: "Kuldip@CloudCar",
-    description: "Connect Car and Home",
-    category: "Convenience",
-    iconUrl: "http://justdrive.net/wp-content/themes/justdrive/assets/img/jd-logo-sans.png",
-    iconX2Url: "http://justdrive.net/wp-content/themes/justdrive/assets/img/jd-logo-sans.png",
-    iconX3Url: "http://justdrive.net/wp-content/themes/justdrive/assets/img/jd-logo-sans.png",
-    oauth: [displayName: "CloudCar", displayLink: "https://CloudCar.com"]
-)
-
-preferences {
-    section ("Control your home while driving your car") {
-                input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
-                input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
-                input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors?", multiple: true, required: false
-                input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors?", multiple: true, required: false
-                input "temperatureSensors", "capability.temperatureMeasurement", title: "Which Temperature Sensors?", multiple: true, required: false
-                input "accelerationSensors", "capability.accelerationSensor", title: "Which Vibration Sensors?", multiple: true, required: false
-                input "waterSensors", "capability.waterSensor", title: "Which Water Sensors?", multiple: true, required: false
-                input "lightSensors", "capability.illuminanceMeasurement", title: "Which Light Sensors?", multiple: true, required: false
-                input "humiditySensors", "capability.relativeHumidityMeasurement", title: "Which Relative Humidity Sensors?", multiple: true, required: false
-                input "alarms", "capability.alarm", title: "Which Sirens?", multiple: true, required: false
-                input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-    }
-}
-
-mappings {
-    path("/scan") {
-        action: [
-            GET: "scanDevices"
-        ]
-    }
-    path("/control/:command") {
-        action: [
-            GET: "updateSwitches"
-        ]
-    }
-    path("/control/:deviceType/:deviceId/:command") {
-        action: [
-            GET: "updateDevice"
-        ]
-    }
-}
-
-def installed() {
-    log.debug "[installed]: state ${state}"
-    initialize ()
-}
-
-def uninstalled() {
-        log.debug "[uninstalled]: ${settings}"
-}
-
-def updated () {
-	log.debug "[updated]: ${settings}"
-    unsubscribe()
-    initialize ()
-}
-
-def initialize () {
-    state.clear() // clear previous state - state is loaded from persistant store
-    addSubscription()
-}
- 
-def addSubscription() {
-	def callbackUrl = 'http://ec2-54-67-21-37.us-west-1.compute.amazonaws.com/notify' //data.callbackUrl
-    log.debug "[addSubscription]  state ${state}"
-    log.debug "[addSubscription]  settings ${settings}"
-	settings.each {
-		log.debug "[addSubscription]  settings ${it}"
-    }
-    
-    def currentDeviceIds = settings.collect { k, devices -> devices }.flatten().collect()// { it.id }.unique()
-    log.debug "[addSubscription]  currentDeviceIds  ${currentDeviceIds}"
-	currentDeviceIds.each {
-        log.debug "[addSubscription]  device ids ${it} - ${it.id}"
-        log.debug "Adding switch subscription " + callbackUrl
-		state[it.id] = [callbackUrl: callbackUrl]
-    }
-	subscribe(switches, "switch.on", mydeviceHandler)
-	subscribe(contactSensors, "contact.open", mydeviceHandler)
-    subscribe(motionSensors, "motion.active", mydeviceHandler)
-	log.debug "[addSubscription] COMPLETED ${state}"
-}
-
-def mydeviceHandler(evt) {
-	def callbackUrl = 'http://ec2-54-67-21-37.us-west-1.compute.amazonaws.com/notify' //data.callbackUrl
-	//def callbackUrl = 'https://testing.justdrive.cloudcar.com/notify/5c5dca5f-1b98-fff9-f111-8072b41c5fb3'
-	log.debug "[deviceHandler] $evt.displayName"
-	def deviceInfo = state[evt.deviceId]
-    log.debug "[deviceHandler] deviceInfo ${deviceInfo}"
-	if (deviceInfo) {
-		try {
-				httpPostJson(uri: callbackUrl, path: '',  body: [deviceId: evt.deviceId, deviceType: evt.name, deviceName: evt.displayName, value: evt.value]) {   
-				log.debug "[deviceHandler] Event data successfully posted"
-			}
-		} catch (groovyx.net.http.ResponseParseException e) {
-			log.debug("Error parsing payload ${e}")
-		}
-	} else {
-		log.debug "[deviceHandler] No subscribed device found"
-	}
-}
-
-
-def scanDevices() {
-        log.debug "[scandevices] ${type}"
-        [
-        switches: switches.collect{KPdevice(it,"switches")},
-        contactSensors: contacts.collect{KPdevice(it,"contactSensors")},
-        temperatures: temperatures.collect{KPdevice(it,"temperature")},
-        ]
-}
-
-private KPdevice(it, type) {
-	def device_state = null
-    log.debug "KPDevice it: ${it}"
-	if (it.currentValue("switch") == "on" ) {
-        device_state = [label:it.label, type:type, id:it.id]
-			for (attribute in it.supportedAttributes) {
-				device_state."${attribute}" = it.currentValue("${attribute}")
-			}
-		}
-		log.debug "KPdevice: ${device_state}"
-		device_state ? device_state : null
-}
-
-def void updateSwitches() {
-	// use the built-in request object to get the command parameter
-	def command = params.command
-	log.debug "updateSwitches: ${params.command}"
-    // all switches have the command
-    // execute the command on all switches
-    // (note we can do this on the array - the command will be invoked on every element
-
-    switch(command) {
-        case "on":
-            switches.on()
-            break
-        case "off":
-            switches.off()
-            break
-        default:
-            httpError(400, "$command is not a valid command for all switches specified")
-    }
-}
-
-def void updateDevice() {
-	// use the built-in request object to get the command parameter
-	def command = params.command
-    def deviceId = params.deviceId
-    def devices = settings[params.deviceType]
-
-    log.debug "[updateDevice] ${deviceId} - ${command} - ${devices}"
-    
-    // all switches have the command
-    // execute the command on all switches
-    // (note we can do this on the array - the command will be invoked on every element
-	def device = devices.find { it.id == deviceId }
-	if (!device) {
-		httpError(404, "Device not found")
-	} else {
-		device."$command"()
-	}
-}
-
-def list() {
-        log.debug "[PROD] list, params: ${params}"
-        def type = params.deviceType
-        settings[type]?.collect{deviceItem(it)} ?: []
-}
-
-def listStates() {
-        log.debug "[PROD] liststates, params: ${params}"
-        def type = params.deviceType
-        def attributeName = attributeFor(type)
-        settings[type]?.collect{deviceState(it, it.currentState(attributeName))} ?: []
-}
-
-def listSubscriptions() {
-        log.debug "[PROD] listSubscription, params: ${params}"
-        state
-}
-
-def update() {
-        def type = params.deviceType
-        def data = request.JSON
-        def devices = settings[type]
-        def device = settings[type]?.find { it.id == params.id }
-        def command = data.command
-
-        log.debug "[PROD] update, params: ${params}, request: ${data}, devices: ${devices*.id}"
-
-        if (!device) {
-                httpError(404, "Device not found")
-        }
-
-        if (validateCommand(device, type, command)) {
-                device."$command"()
-        } else {
-                httpError(403, "Access denied. This command is not supported by current capability.")
-        }
-}
-
-/**
- * Validating the command passed by the user based on capability.
-
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-        log.debug "[validatecommand] ${device} ${deviceType} ${command}"
-        def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-        def currentDeviceCapability = getCapabilityName(deviceType)
-        if (capabilityCommands[currentDeviceCapability]) {
-                return command in capabilityCommands[currentDeviceCapability] ? true : false
-        } else {
-                // Handling other device types here, which don't accept commands
-                httpError(400, "Bad request.")
-        }
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-        log.debug "[getCapabilityName] ${type}"
-    switch(type) {
-                case "switches":
-                        return "Switch"
-                case "alarms":
-                        return "Alarm"
-                case "locks":
-                        return "Lock"
-                default:
-                        return type
-        }
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-        log.debug "[getDeviceCapabilities] ${deviceCapabilities}"
-        def map = [:]
-        deviceCapabilities.collect {
-                map[it.name] = it.commands.collect{ it.name.toString() }
-        }
-        return map
-}
-
-def show() {
-        def type = params.deviceType
-        def devices = settings[type]
-        def device = devices.find { it.id == params.id }
-
-        log.debug "[PROD] show, params: ${params}, devices: ${devices*.id}"
-        if (!device) {
-                httpError(404, "Device not found")
-        }
-        else {
-                def attributeName = attributeFor(type)
-                def s = device.currentState(attributeName)
-                deviceState(device, s)
-        }
-}
-
-def removeSubscription() {
-        def type = params.deviceType
-        def devices = settings[type]
-        def deviceId = params.id
-        def device = devices.find { it.id == deviceId }
-
-        log.debug "[PROD] removeSubscription, params: ${params}, request: ${data}, device: ${device}"
-        if (device) {
-                log.debug "Removing $device.displayName subscription"
-                state.remove(device.id)
-                unsubscribe(device)
-        }
-        log.info state
-}
-
-private deviceItem(it) {
-        log.debug "[deviceItem] ${it}"
-        it ? [id: it.id, label: it.displayName] : null
-
-}
-
-private deviceState(device, s) {
-        log.debug "[deviceState] ${device}: ${s}"
-        device && s ? [id: device.id, label: device.displayName, name: s.name, value: s.value, unixTime: s.date.time] : null
-}
-
-private attributeFor(type) {
-        log.debug "[attributeFor] ${type}"
-        switch (type) {
-                case "switches":
-                        log.debug "[PROD] switch type"
-                        return "switch"
-                case "locks":
-                        log.debug "[PROD] lock type"
-                        return "lock"
-                case "alarms":
-                        log.debug "[PROD] alarm type"
-                        return "alarm"
-                case "lightSensors":
-                        log.debug "[PROD] illuminance type"
-                        return "illuminance"
-                default:
-                        log.debug "[PROD] other sensor type"
-                        return "Sensors"
-        }
-}

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state?.deviceDetail[deviceId]
+		def detail = state.deviceDetail[deviceId]
 
 		try {
-			switch(detail?.type) {
+			switch(detail.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state?.deviceDetail[deviceId]
-		def data = state?.deviceState[deviceId]
-		def child = children?.find { it.deviceNetworkId == deviceId }
+		def detail = state.deviceDetail[deviceId]
+		def data = state.deviceState[deviceId]
+		def child = children.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail?.type) {
+		switch(detail.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/mmacaula/tcp-bulbs-more-reliable.src/tcp-bulbs-more-reliable.groovy

@@ -0,0 +1,679 @@
+/**
+ *  TCP Bulbs (Connect)
+ *
+ *  Copyright 2014 Todd Wackford
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+import java.security.MessageDigest;
+
+private apiUrl() { "https://tcp.greenwavereality.com/gwr/gop.php?" }
+
+definition(
+    name: "TCP Bulbs - more reliable",
+    namespace: "mmacaula",
+    author: "Mike Macaulay",
+    description: "Connect your TCP bulbs to SmartThings using Cloud to Cloud integration. You must create a remote login acct on TCP Mobile App.",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/tcp@2x.png",
+    singleInstance: true
+)
+
+
+preferences {
+    def msg = """Tap 'Next' after you have entered in your TCP Mobile remote credentials.
+
+Once your credentials are accepted, SmartThings will scan your TCP installation for Bulbs."""
+
+    page(name: "selectDevices", title: "Connect Your TCP Lights to SmartThings", install: false, uninstall: true, nextPage: "chooseBulbs") {
+        section("TCP Connected Remote Credentials") {
+            input "username", "text", title: "Enter TCP Remote Email/UserName", required: true
+            input "password", "password", title: "Enter TCP Remote Password", required: true
+            paragraph msg
+        }
+    }
+
+    page(name: "chooseBulbs", title: "Choose Bulbs to Control With SmartThings", content: "initialize")
+}
+
+def installed() {
+    debugOut "Installed with settings: ${settings}"
+
+    unschedule()
+    unsubscribe()
+
+    setupBulbs()
+
+    log.debug "schedule every 5 minutes syncronizeDevices)"
+    runEvery5Minutes(syncronizeDevices)
+}
+
+def updated() {
+    debugOut "Updated with settings: ${settings}"
+
+    unschedule()
+
+    setupBulbs()
+
+    log.debug "schedule update every 5 minutes syncronizeDevices)"
+    runEvery5Minutes(syncronizeDevices)
+}
+
+def uninstalled()
+{
+    unschedule() //in case we have hanging runIn()'s
+}
+
+private removeChildDevices(delete)
+{
+    debugOut "deleting ${delete.size()} bulbs"
+    debugOut "deleting ${delete}"
+    delete.each {
+        deleteChildDevice(it.device.deviceNetworkId)
+    }
+}
+
+def uninstallFromChildDevice(childDevice)
+{
+    def errorMsg = "uninstallFromChildDevice was called and "
+    if (!settings.selectedBulbs) {
+        debugOut errorMsg += "had empty list passed in"
+        return
+    }
+
+    def dni = childDevice.device.deviceNetworkId
+
+    if ( !dni ) {
+        debugOut errorMsg += "could not find dni of device"
+        return
+    }
+
+    def newDeviceList = settings.selectedBulbs - dni
+    app.updateSetting("selectedBulbs", newDeviceList)
+
+    debugOut errorMsg += "completed succesfully"
+}
+
+
+def setupBulbs() {
+    debugOut "In setupBulbs"
+
+    def bulbs = state.devices
+    def deviceFile = "TCP Bulb"
+
+    selectedBulbs.each { did ->
+        //see if this is a selected bulb and install it if not already
+        def d = getChildDevice(did)
+
+        if(!d) {
+            def newBulb = bulbs.find { (it.did) == did }
+            d = addChildDevice("wackford", deviceFile, did, null, [name: "${newBulb?.name}", label: "${newBulb?.name}", completedSetup: true])
+
+            /*if ( isRoom(did) ) { //change to the multi light group icon for a room device
+                d.setIcon("switch", "on",  "st.lights.multi-light-bulb-on")
+                d.setIcon("switch", "off",  "st.lights.multi-light-bulb-off")
+                d.save()
+            }*/
+
+        } else {
+            debugOut "We already added this device"
+        }
+    }
+
+    // Delete any that are no longer in settings
+    def delete = getChildDevices().findAll { !selectedBulbs?.contains(it.deviceNetworkId) }
+    removeChildDevices(delete)
+
+    //we want to ensure syncronization between rooms and bulbs
+    //syncronizeDevices()
+}
+
+def initialize() {
+
+    atomicState.token = ""
+
+    getToken()
+
+    if ( atomicState.token == "error" ) {
+        return dynamicPage(name:"chooseBulbs", title:"TCP Login Failed!\r\nTap 'Done' to try again", nextPage:"", install:false, uninstall: false) {
+            section("") {}
+        }
+    } else {
+        "we're good to go"
+        debugOut "We have Token."
+    }
+
+    //getGatewayData() //we really don't need anything from the gateway
+
+    deviceDiscovery()
+
+    def options = devicesDiscovered() ?: []
+
+    def msg = """Tap 'Done' after you have selected the desired devices."""
+
+    return dynamicPage(name:"chooseBulbs", title:"TCP and SmartThings Connected!", nextPage:"", install:true, uninstall: true) {
+        section("Tap Below to View Device List") {
+            input "selectedBulbs", "enum", required:false, title:"Select Bulb/Fixture", multiple:true, options:options
+            paragraph msg
+        }
+    }
+}
+
+def deviceDiscovery() {
+    def data = "<gip><version>1</version><token>${atomicState.token}</token></gip>"
+
+    def Params = [
+        cmd: "RoomGetCarousel",
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    def cmd = toQueryString(Params)
+
+    def rooms = ""
+    log.debug 'trying to discover devices'
+    apiPost(cmd) { response ->
+        rooms = response.data.gip.room
+    }
+
+    debugOut "rooms data = ${rooms}"
+
+    def devices = []
+    def bulbIndex = 1
+    def lastRoomName = null
+    def deviceList = []
+
+    if ( rooms[1] == null ) {
+        def roomId = rooms.rid
+        def roomName = rooms.name
+        devices  = rooms.device
+        if ( devices[1] != null ) {
+            debugOut "Room Device Data: did:${roomId} roomName:${roomName}"
+            //deviceList += ["name" : "${roomName}", "did" : "${roomId}", "type" : "room"]
+            devices.each({
+                debugOut "Bulb Device Data: did:${it?.did} room:${roomName} BulbName:${it?.name}"
+                deviceList += ["name" : "${roomName} ${it?.name}", "did" : "${it?.did}", "type" : "bulb"]
+            })
+        } else {
+            debugOut "Bulb Device Data: did:${it?.did} room:${roomName} BulbName:${it?.name}"
+            deviceList += ["name" : "${roomName} ${it?.name}", "did" : "${it?.did}", "type" : "bulb"]
+        }
+    } else {
+        rooms.each({
+            devices  = it.device
+            def roomName = it.name
+            if ( devices[1] != null ) {
+                def roomId = it?.rid
+                debugOut "Room Device Data: did:${roomId} roomName:${roomName}"
+                //deviceList += ["name" : "${roomName}", "did" : "${roomId}", "type" : "room"]
+                devices.each({
+                    debugOut "Bulb Device Data: did:${it?.did} room:${roomName} BulbName:${it?.name}"
+                    deviceList += ["name" : "${roomName} ${it?.name}", "did" : "${it?.did}", "type" : "bulb"]
+                })
+            } else {
+                debugOut "Bulb Device Data: did:${devices?.did} room:${roomName} BulbName:${devices?.name}"
+                deviceList += ["name" : "${roomName} ${devices?.name}", "did" : "${devices?.did}", "type" : "bulb"]
+            }
+        })
+    }
+    devices = ["devices" : deviceList]
+    state.devices = devices.devices
+}
+
+Map devicesDiscovered() {
+    def devices =  state.devices
+    def map = [:]
+    if (devices instanceof java.util.Map) {
+        devices.each {
+            def value = "${it?.name}"
+            def key = it?.did
+            map["${key}"] = value
+        }
+    } else { //backwards compatable
+        devices.each {
+            def value = "${it?.name}"
+            def key = it?.did
+            map["${key}"] = value
+        }
+    }
+    map
+}
+
+def getGatewayData() {
+    debugOut "In getGatewayData"
+
+    def data = "<gip><version>1</version><token>${atomicState.token}</token></gip>"
+
+    def qParams = [
+        cmd: "GatewayGetInfo",
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    def cmd = toQueryString(qParams)
+
+    apiPost(cmd) { response ->
+        debugOut "the gateway reponse is ${response.data.gip.gateway}"
+    }
+
+}
+
+def getToken(Closure callback) {
+
+    atomicState.token = ""
+
+    if (password) {
+        def hashedPassword = generateMD5(password)
+
+        def data = "<gip><version>1</version><email>${username}</email><password>${hashedPassword}</password></gip>"
+
+        def qParams = [
+            cmd : "GWRLogin",
+            data: "${data}",
+            fmt : "json"
+        ]
+
+        def cmd = toQueryString(qParams)
+
+        apiPost(cmd) { response ->
+            def status = response.data.gip.rc
+
+            //sendNotificationEvent("Get token status ${status}")
+
+            if (status != "200") {//success code = 200
+                def errorText = response.data.gip.error
+                debugOut "Error logging into TCP Gateway. Error = ${errorText}"
+                atomicState.token = "error"
+            } else {
+                atomicState.token = response.data.gip.token
+                if(callback){
+                    callback.call()
+                }
+            }
+        }
+    } else {
+        log.warn "Unable to log into TCP Gateway. Error = Password is null"
+        atomicState.token = "error"
+    }
+}
+
+def apiPost(String data, Integer retryCount = 0, Closure callback) {
+    debugOut "In apiPost with data: ${data}"
+    def params = [
+        uri: apiUrl(),
+        body: data
+    ]
+
+    httpPost(params) {
+        response ->
+            def rc = response.data.gip.rc
+
+            if ( rc == "200" ) {
+                debugOut ("Return Code = ${rc} = Command Succeeded.")
+                callback.call(response)
+
+            }  else if ( rc.startsWith("4") || rc.startsWith("5") ) {
+                debugOut "Return Code = ${rc} = Error: Something happened!" //Error code from gateway
+                sendNotificationEvent("Return Code = ${rc} = Error: Something happened!  Retry # ${retryCount}" )
+                log.debug "Refreshing Token"
+                 if(retryCount > 5){
+                    // give up, send a notification
+                    sendNotificationEvent("TCP Lighting is having Communication Errors. Error code = ${rc}. Gave up after ${retryCount} tries")
+                }
+                getToken({  ->
+                    def updatedTokenData = data.replaceFirst("<token>[^<]*</token>", '<token>${atomicState.token}</token>')
+                    // try again if we got our token
+                    sendNotificationEvent('re-fetched token, trying again')
+
+                    apiPost(updatedTokenData, retryCount++, callback)
+                })
+                //callback.call(response) //stubbed out so getToken works (we had race issue)
+
+            } else {
+                log.error "Return Code = ${rc} = Error!" //Error code from gateway
+                sendNotificationEvent("TCP Lighting is having Communication Errors. Error code = ${rc}. Check that TCP Gateway is online")
+                callback.call(response)
+            }
+    }
+}
+
+
+//this is not working. TCP power reporting is broken. Leave it here for future fix
+def calculateCurrentPowerUse(deviceCapability, usePercentage) {
+    debugOut "In calculateCurrentPowerUse()"
+
+    debugOut "deviceCapability: ${deviceCapability}"
+    debugOut "usePercentage: ${usePercentage}"
+
+    def calcPower = usePercentage * 1000
+    def reportPower = calcPower.round(1) as String
+
+    debugOut "report power = ${reportPower}"
+
+    return reportPower
+}
+
+def generateSha256(String s) {
+
+    MessageDigest digest = MessageDigest.getInstance("SHA-256")
+    digest.update(s.bytes)
+    new BigInteger(1, digest.digest()).toString(16).padLeft(40, '0')
+}
+
+def generateMD5(String s) {
+    MessageDigest digest = MessageDigest.getInstance("MD5")
+    digest.update(s.bytes);
+    new BigInteger(1, digest.digest()).toString(16).padLeft(32, '0')
+}
+
+String toQueryString(Map m) {
+    return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
+}
+
+def checkDevicesOnline(bulbs) {
+    debugOut "In checkDevicesOnline()"
+
+    def onlineBulbs = []
+    def thisBulb = []
+
+    bulbs.each {
+        def dni = it?.did
+        thisBulb = it
+
+        def data = "<gip><version>1</version><token>${atomicState.token}</token><did>${dni}</did></gip>"
+
+        def qParams = [
+            cmd: "DeviceGetInfo",
+            data: "${data}",
+            fmt: "json"
+        ]
+
+        def cmd = toQueryString(qParams)
+
+        def bulbData = []
+
+        apiPost(cmd) { response ->
+            bulbData = response.data.gip
+        }
+
+        if ( bulbData?.offline == "1" ) {
+            debugOut "${it?.name} is offline with offline value of ${bulbData?.offline}"
+
+        } else {
+            debugOut "${it?.name} is online with offline value of ${bulbData?.offline}"
+            onlineBulbs += thisBulb
+        }
+    }
+    return onlineBulbs
+}
+
+def syncronizeDevices() {
+    debugOut "In syncronizeDevices"
+
+    def update = getChildDevices().findAll { selectedBulbs?.contains(it.deviceNetworkId) }
+
+    update.each {
+        def dni = getChildDevice( it.deviceNetworkId )
+        debugOut "dni = ${dni}"
+
+        if (isRoom(dni)) {
+            pollRoom(dni)
+        } else {
+            poll(dni)
+        }
+    }
+    getToken()
+
+}
+
+boolean isRoom(dni) {
+    def device = state.devices.find() {(( it.type == 'room') && (it.did == "${dni}"))}
+}
+
+boolean isBulb(dni) {
+    def device = state.devices.find() {(( it.type == 'bulb') && (it.did == "${dni}"))}
+}
+
+def debugEvent(message, displayEvent) {
+
+    def results = [
+        name: "appdebug",
+        descriptionText: message,
+        displayed: displayEvent
+    ]
+    log.debug "Generating AppDebug Event: ${results}"
+    sendEvent (results)
+
+}
+
+def debugOut(msg) {
+    log.debug msg
+    //sendNotificationEvent(msg) //Uncomment this for troubleshooting only
+}
+
+
+/**************************************************************************
+ Child Device Call In Methods
+ **************************************************************************/
+def on(childDevice) {
+    debugOut "On request from child device"
+
+    def dni = childDevice.device.deviceNetworkId
+    def data = ""
+    def cmd = ""
+
+    if ( isRoom(dni) ) { // this is a room, not a bulb
+        data = "<gip><version>1</version><token>$atomicState.token</token><rid>${dni}</rid><type>power</type><value>1</value></gip>"
+        cmd = "RoomSendCommand"
+    } else {
+        data = "<gip><version>1</version><token>$atomicState.token</token><did>${dni}</did><type>power</type><value>1</value></gip>"
+        cmd = "DeviceSendCommand"
+    }
+
+    def qParams = [
+        cmd: cmd,
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    cmd = toQueryString(qParams)
+
+    apiPost(cmd) { response ->
+        debugOut "ON result: ${response.data}"
+    }
+
+    //we want to ensure syncronization between rooms and bulbs
+    //runIn(2, "syncronizeDevices")
+}
+
+def off(childDevice) {
+    debugOut "Off request from child device"
+
+    def dni = childDevice.device.deviceNetworkId
+    def data = ""
+    def cmd = ""
+
+    if ( isRoom(dni) ) { // this is a room, not a bulb
+        data = "<gip><version>1</version><token>$atomicState.token</token><rid>${dni}</rid><type>power</type><value>0</value></gip>"
+        cmd = "RoomSendCommand"
+    } else {
+        data = "<gip><version>1</version><token>$atomicState.token</token><did>${dni}</did><type>power</type><value>0</value></gip>"
+        cmd = "DeviceSendCommand"
+    }
+
+    def qParams = [
+        cmd: cmd,
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    cmd = toQueryString(qParams)
+
+    apiPost(cmd) { response ->
+        debugOut "${response.data}"
+    }
+
+    //we want to ensure syncronization between rooms and bulbs
+    //runIn(2, "syncronizeDevices")
+}
+
+def setLevel(childDevice, value) {
+    debugOut "setLevel request from child device"
+
+    def dni = childDevice.device.deviceNetworkId
+    def data = ""
+    def cmd = ""
+
+    if ( isRoom(dni) ) { // this is a room, not a bulb
+        data = "<gip><version>1</version><token>${atomicState.token}</token><rid>${dni}</rid><type>level</type><value>${value}</value></gip>"
+        cmd = "RoomSendCommand"
+    } else {
+        data = "<gip><version>1</version><token>${atomicState.token}</token><did>${dni}</did><type>level</type><value>${value}</value></gip>"
+        cmd = "DeviceSendCommand"
+    }
+
+    def qParams = [
+        cmd: cmd,
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    cmd = toQueryString(qParams)
+
+    apiPost(cmd) { response ->
+        debugOut "${response.data}"
+    }
+
+    //we want to ensure syncronization between rooms and bulbs
+    //runIn(2, "syncronizeDevices")
+}
+
+// Really not called from child, but called from poll() if it is a room
+def pollRoom(dni) {
+    debugOut "In pollRoom"
+    def data = ""
+    def cmd = ""
+    def roomDeviceData = []
+
+    data = "<gip><version>1</version><token>${atomicState.token}</token><rid>${dni}</rid><fields>name,power,control,status,state</fields></gip>"
+    cmd = "RoomGetDevices"
+
+    def qParams = [
+        cmd: cmd,
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    cmd = toQueryString(qParams)
+
+    apiPost(cmd) { response ->
+        roomDeviceData = response.data.gip
+    }
+
+    debugOut "Room Data: ${roomDeviceData}"
+
+    def totalPower = 0
+    def totalLevel = 0
+    def cnt = 0
+    def onCnt = 0 //used to tally on/off states
+
+    roomDeviceData.device.each({
+        if ( getChildDevice(it.did) ) {
+            totalPower += it.other.bulbpower.toInteger()
+            totalLevel += it.level.toInteger()
+            onCnt += it.state.toInteger()
+            cnt += 1
+        }
+    })
+
+    def avgLevel = totalLevel/cnt
+    def usingPower = totalPower * (avgLevel / 100) as float
+    def room = getChildDevice( dni )
+
+    //the device is a room but we use same type file
+    sendEvent( dni, [name: "setBulbPower",value:"${totalPower}"] ) //used in child device calcs
+
+    //if all devices in room are on, room is on
+    if ( cnt == onCnt ) { // all devices are on
+        sendEvent( dni, [name: "switch",value:"on"] )
+        sendEvent( dni, [name: "power",value:usingPower.round(1)] )
+
+    } else { //if any device in room is off, room is off
+        sendEvent( dni, [name: "switch",value:"off"] )
+        sendEvent( dni, [name: "power",value:0.0] )
+    }
+
+    debugOut "Room Using Power: ${usingPower.round(1)}"
+}
+
+def poll(childDevice) {
+    debugOut "In poll() with ${childDevice}"
+
+
+    def dni = childDevice.device.deviceNetworkId
+
+    def bulbData = []
+    def data = ""
+    def cmd = ""
+
+    if ( isRoom(dni) ) { // this is a room, not a bulb
+        pollRoom(dni)
+        return
+    }
+
+    data = "<gip><version>1</version><token>${atomicState.token}</token><did>${dni}</did></gip>"
+    cmd = "DeviceGetInfo"
+
+    def qParams = [
+        cmd: cmd,
+        data: "${data}",
+        fmt: "json"
+    ]
+
+    cmd = toQueryString(qParams)
+
+    apiPost(cmd) { response ->
+        bulbData = response.data.gip
+        debugOut "This Bulbs Data Return = ${bulbData}"
+
+        def bulb = getChildDevice( dni )
+
+        //set the devices power max setting to do calcs within the device type
+        if ( bulbData.other.bulbpower )
+            sendEvent( dni, [name: "setBulbPower",value:"${bulbData.other.bulbpower}"] )
+
+        if (( bulbData.state == "1" ) && ( bulb?.currentValue("switch") != "on" ))
+            sendEvent( dni, [name: "switch",value:"on"] )
+
+        if (( bulbData.state == "0" ) && ( bulb?.currentValue("switch") != "off" ))
+            sendEvent( dni, [name: "switch",value:"off"] )
+
+        //if ( bulbData.level != bulb?.currentValue("level")) {
+        //    sendEvent( dni, [name: "level",value: "${bulbData.level}"] )
+        //    sendEvent( dni, [name: "setLevel",value: "${bulbData.level}"] )
+        //}
+
+        if (( bulbData.state == "1" ) && ( bulbData.other.bulbpower )) {
+            def levelSetting = bulbData.level as float
+            def bulbPowerMax = bulbData.other.bulbpower as float
+            def calculatedPower = bulbPowerMax * (levelSetting / 100)
+            sendEvent( dni, [name: "power", value: calculatedPower.round(1)] )
+        }
+
+        if (( bulbData.state == "0" ) && ( bulbData.other.bulbpower ))
+            sendEvent( dni, [name: "power", value: 0.0] )
+
+    }
+
+
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,7 +39,6 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
-	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -48,9 +47,6 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
-				if (dimmersContainUnsupportedDevices()) {
-					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
-				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -75,31 +71,6 @@ def rootPage() {
 	}
 }
 
-def unsupportedDevicesPage() {
-
-	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
-
-	dynamicPage(name: "unsupportedDevicesPage") {
-		if (unsupportedDimmers) {
-			section("These devices do not support the setLevel command") {
-				unsupportedDimmers.each {
-					paragraph deviceLabel(it)
-				}
-			}
-			section {
-				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
-			}
-			section {
-				paragraph "If you think there is a mistake here, please contact support."
-			}
-		} else {
-			section {
-				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
-			}
-		}
-	}
-}
-
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -557,16 +528,14 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
+			def canChangeColors = hasSetColorCommand(dimmer)
 
-			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
-				def hue = getHue(dimmer, nextLevel)
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
-				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
-			} else if (hasSetLevelCommand(dimmer)) {
-				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
-				dimmer.setLevel(nextLevel)
+			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
+
+			if (shouldChangeColors && canChangeColors) {
+				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
 			} else {
-				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
+				dimmer.setLevel(nextLevel)
 			}
 
 		}
@@ -848,21 +817,24 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
-private dimmersContainUnsupportedDevices() {
-	def found = dimmers.find { hasSetLevelCommand(it) == false }
-	return found != null
-}
-
 private hasSetLevelCommand(device) {
-	return hasCommand(device, "setLevel")
+	def isDimmer = false
+	device.supportedCommands.each {
+		if (it.name.contains("setLevel")) {
+			isDimmer = true
+		}
+	}
+	return isDimmer
 }
 
 private hasSetColorCommand(device) {
-	return hasCommand(device, "setColor")
-}
-
-private hasCommand(device, String command) {
-	return (device.supportedCommands.find { it.name == command } != null)
+	def hasColor = false
+	device.supportedCommands.each {
+		if (it.name.contains("setColor")) {
+			hasColor = true
+		}
+	}
+	return hasColor
 }
 
 private dimmersWithSetColorCommand() {
@@ -1101,4 +1073,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,73 +658,29 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
+
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-    if (device) {
-        if (validateCommand(device, command)) {
-            if (arguments) {
-                device."$command"(*arguments)
-            } else {
-                device."$command"()
-            }
-            render status: 204, data: "{}"
-        } else {
-          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
-        }
-    } else {
-      render status: 404, data: '{"msg": "Device not found"}'
-    }
-  }
-}
-
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(device)
-	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
+		if (device) {
+        	if (device.hasCommand("$command")) {
+                if (arguments) {
+                    device."$command"(*arguments)
+                } else {
+                    device."$command"()
+                }
+                render status: 204, data: "{}"
+           	} else {
+				render status: 404, data: '{"msg": "Command not supported by this Device"}'
+			}
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
+		}
 	}
 }
 
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(device) {
-    def capName = ""
-    if (switches.find{it.id == device.id})
-			capName = "Switch"
-		else if (alarms.find{it.id == device.id})
-			capName = "Alarm"
-		else if (locks.find{it.id == device.id})
-			capName = "Lock"
-    log.trace "Device: $device - Capability Name: $capName"
-		return capName
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -824,51 +780,17 @@ def deviceHandler(evt) {
 
 def sendToHarmony(evt, String callbackUrl) {
 	def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
-  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-  	sendHubCommand(new physicalgraph.device.HubAction(
-  		method: "POST",
-  		path: path,
-  		headers: [
-  			"Host": host,
-  			"Content-Type": "application/json"
-  		],
-  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-  	))
-  } else {
-    def params = [
-      uri: callbackUrl,
-      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-    ]
-    try {
-        log.debug "Sending data to Harmony Cloud: $params"
-        httpPostJson(params) { resp ->
-            log.debug "Harmony Cloud - Response: ${resp.status}"
-        }
-    } catch (e) {
-        log.error "Harmony Cloud - Something went wrong: $e"
-    }
-  }
-}
-
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
+	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+	sendHubCommand(new physicalgraph.device.HubAction(
+		method: "POST",
+		path: path,
+		headers: [
+			"Host": host,
+			"Content-Type": "application/json"
+		],
+		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+	))
 }
 
 def listHubs() {

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,89 +92,24 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	def type = params.param1
-	if (!devices) {
-		httpError(404, "Devices not found")
-	}
-	
-	if (command){
-		devices.each { device ->
-			executeCommand(device, type, command)
-		}
+	if (command) {
+		devices."$command"()
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	def type = params.param1
-	def device = devices?.find { it.id == params.id }
-
-	if (!device) {
-		httpError(404, "Device not found")
-	}
-
 	if (command) {
-		executeCommand(device, type, command)
+		def device = devices.find { it.id == params.id }
+		if (!device) {
+			httpError(404, "Device not found")
+		} else {
+			device."$command"()
+		}
 	}
 }
 
-/**
- * Validating the command passed by the user based on capability.
- * @return boolean
- */
-def validateCommand(device, deviceType, command) {
-	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
-	def currentDeviceCapability = getCapabilityName(deviceType)
-	if (capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
-	} else {
-		// Handling other device types here, which don't accept commands
-		httpError(400, "Bad request.")
-	}
-}
-
-/**
- * Need to get the attribute name to do the lookup. Only
- * doing it for the device types which accept commands
- * @return attribute name of the device type
- */
-def getCapabilityName(type) {
-    switch(type) {
-		case "switches":
-			return "Switch"
-		case "locks":
-			return "Lock"
-		default:
-			return type
-	}
-}
-
-/**
- * Constructing the map over here of
- * supported commands by device capability
- * @return a map of device capability -> supported commands
- */
-def getDeviceCapabilityCommands(deviceCapabilities) {
-	def map = [:]
-	deviceCapabilities.collect {
-		map[it.name] = it.commands.collect{ it.name.toString() }
-	}
-	return map
-}
-
-/**
- * Validates and executes the command
- * on the device or devices
- */
-def executeCommand(device, type, command) {
-	if (validateCommand(device, type, command)) {
-		device."$command"()
-	} else {
-		httpError(403, "Access denied. This command is not supported by current capability.")
-	}	
-}
-
 private show(devices, name) {
 	def device = devices.find { it.id == params.id }
 	if (!device) {