MSA-1398: app allows to control fan on and off

fix divide by zero exception [DVCSMP-1891]

devicetypes/living-room/fan.src/fan.groovy

@@ -0,0 +1,47 @@
+/**
+ *  Fan
+ *
+ *  Copyright 2016 Mike
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fan", namespace: "Living Room", author: "Mike") {
+		capability "Switch"
+	}
+
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'switch' attribute
+
+}
+
+// handle commands
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -326,6 +327,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,9 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -245,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,7 +28,6 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -83,12 +82,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation()
+			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 	}
 	response(cmds)
 }

smartapps/gr8gitsby/timer-light.src/timer-light.groovy

@@ -1,178 +0,0 @@
-/**
- *  Timer Light
- *
- *  Copyright 2016 Kevin Hill
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- 
-import groovy.time.*
-
-definition(
-    name: "Timer Light",
-    namespace: "gr8gitsby",
-    author: "Kevin Hill",
-    description: "This puts outside lights on a timer",
-    category: "Convenience",
-    iconUrl: "https://source.unsplash.com/category/nature/60x60",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
-	// Use a light swtich
-	section("Light Switch") {
-		// Capabilities link: http://docs.smartthings.com/en/latest/capabilities-reference.html
-        // Input data types: http://docs.smartthings.com/en/latest/device-type-developers-guide/device-preferences.html?highlight=input#supported-input-types
-        input "theSwitch", "capability.switch", title: "Pick your light switch"
-        input "confirmationSwitch", "capability.switch", title: "Pick the notification switch"
-        input "minutes", "number", title: "Enter the number of minutes you'd like the lights on"
-        input "person", "capability.presenceSensor", title: "When who arrives?"
-        
-        // When arrival is detected, if it is dark, turn on the outside lights
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-    subscribe(theSwitch, "switch", switchHandler)
-    subscribe(confirmationSwitch, "switch", confirmationSwitchHandler)
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// This method sets up the app
-    subscribe(person, "presence", presenceChange)
-    state.Flashes = 4
-    initialSunPosition()
-}
-
-def presenceChange(evt){
-	log.debug("presenceChange")
-    // if someone arrives at night the lights will turn on
-    if("present" == evt.value){
-    	timerLight()
-    }
-}
-
-// Function to set lights on timer for person arriving
-def timerLight() {
-	log.debug(state.sunPosition)
-	if(state.sunPosition == "down"){
-    	light.on()
-    	runIn(60 * minutes, turnOff)
-    }
-}
-
-def turnOff(){
-	// This method turns off the ligt
-	theSwitch.off()
-    confirmationSwitch.off()
-}
-
-def initialSunPosition() {  
-	// This method determines if sun is down at time of initializtion and run sunsetHandler() if so
-
-	def s = getSunriseAndSunset(zipCode: "98052")
-	def now = new Date()
-    def riseTime = s.sunrise
-	def setTime = s.sunset
-
-    if(setTime.before(now)) {
-        sunsetHandler()
-        log.info "Sun is already down, run sunsetHandler"
-    }
-    else 
-    {	if (riseTime.after(now)) {
-        sunriseHandler()
-        log.info "Sun is up, run sunriseHandler"
-        }
-    } 
-}
-
-def sunriseHandler() {
-	// method to set the sun position when the sun rises
-    state.sunPosition = "up"
-}
-
-def sunsetHandler() {
-	// method to set the sun position when the sunsets
-    state.sunPosition = "down"
-}
-
-/*
-def switchHandler(evt) {
-	log.debug("switch Handler Fired")
-}
-*/
-def confirmationSwitchHandler(evt) {
-	state.Flashes = state.Flashes - 1
-    log.debug("Flashes: ${state.Flashes}")
-    log.debug("Event State: ${evt.value}")
-	if(evt.value == "on" && state.Flashes > 0) {
-    	runIn(2, turnOffConfirmationSwitch)
-    } else if(evt.value == "off" && state.Flashes > 0) {
-    	runIn(2, turnOnConfirmationSwitch)
-    }
-    
-    if(state.Flashes == 0){
-    	state.Flashes = 4
-    }
-}
-
-def turnOnConfirmationSwitch(){
-	confirmationSwitch.on()
-}
-
-def turnOffConfirmationSwitch(){
-	confirmationSwitch.off()
-}
-
-def switchHandler(evt){
-	log.debug("light Event handler fired")
-	// use Event rather than DeviceState because we may be changing DeviceState to only store changed values
-    def recentStates = theSwitch.eventsSince(new Date(now() - 4000), [all:true, max: 10]).findAll{it.name == "switch"}
-    log.debug "${recentStates?.size()} STATES FOUND, LAST AT ${recentStates ? recentStates[0].dateCreated : ''}"
-	//sendPush("Attempting to check light presses")
-
-    if (evt.value == "on") {
-        log.debug("==== ON ====")
-    }
-
-    log.debug(recentStates.size())
-    //if (evt.isPhysical()) {
-    
-		if (recentStates.size() >= 2) {
-        	 
-            log.debug "Outside light timer mode engaged"
-            def switchattr = confirmationSwitch.currentValue("switch")
-            log.debug "confirmationSwitch: $switchattr"
-            
-            confirmationSwitch.on()
-            
-            //alternativeSwitch.off()
-            //def message = "${location.name} executed ${settings.onPhrase} because ${evt.title} was tapped twice."
-            runIn(60 * minutes, turnOff)
-        } else {
-        	log.trace "Skipping digital on/off event"
-        }
-    
-	//log.debug("switch is on, turn off in $minutes")
-    //runIn(60*minutes, turnOff)
-    
-	//}
-}

smartapps/living-room/fan.src/fan.groovy

@@ -0,0 +1,50 @@
+/**
+ *  Fan
+ *
+ *  Copyright 2016 Mike
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Fan",
+    namespace: "Living Room",
+    author: "Mike",
+    description: "Turn Fan on/off",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis()
+	def totalRunTime = totalRunTimeMillis() ?: 1
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) {
+            if (body instanceof java.util.Map) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
@@ -830,22 +830,22 @@ def setColorTemperature(childDevice, huesettings) {
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-    
+
     def value = [:]
     def hue = null
     def sat = null
     def xy = null
-    
+
     if (huesettings.hex != null) {
         value.xy = getHextoXY(huesettings.hex)
     } else {
         if (huesettings.hue != null)
             value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)   
+        if (huesettings.saturation != null)
             value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
     }
-    
-    // Default behavior is to turn light on 
+
+    // Default behavior is to turn light on
     value.on = true
 
     if (huesettings.level != null) {
@@ -853,7 +853,7 @@ def setColor(childDevice, huesettings) {
             value.on = false
         else if (huesettings.level == 1)
             value.bri = 1
-        else 
+        else
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-		return command in capabilityCommands[currentDeviceCapability] ? true : false
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")
@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,25 +852,6 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
-}
-
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }