MSA-1383: I developed this to work with GE Z-Wave switches. The application will use your presence to turn on some outside light when you arrive home only if the sun is down. When leaving the house if you turn the light switch on and off, on and off, then your outside light is in a timer mode. Additionally you can set another switch in your house to confirm that the outside lights are in timer mode.

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -327,9 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,9 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
-
-		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -248,8 +245,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

smartapps/gr8gitsby/timer-light.src/timer-light.groovy

@@ -0,0 +1,178 @@
+/**
+ *  Timer Light
+ *
+ *  Copyright 2016 Kevin Hill
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+import groovy.time.*
+
+definition(
+    name: "Timer Light",
+    namespace: "gr8gitsby",
+    author: "Kevin Hill",
+    description: "This puts outside lights on a timer",
+    category: "Convenience",
+    iconUrl: "https://source.unsplash.com/category/nature/60x60",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	// Use a light swtich
+	section("Light Switch") {
+		// Capabilities link: http://docs.smartthings.com/en/latest/capabilities-reference.html
+        // Input data types: http://docs.smartthings.com/en/latest/device-type-developers-guide/device-preferences.html?highlight=input#supported-input-types
+        input "theSwitch", "capability.switch", title: "Pick your light switch"
+        input "confirmationSwitch", "capability.switch", title: "Pick the notification switch"
+        input "minutes", "number", title: "Enter the number of minutes you'd like the lights on"
+        input "person", "capability.presenceSensor", title: "When who arrives?"
+        
+        // When arrival is detected, if it is dark, turn on the outside lights
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+    subscribe(theSwitch, "switch", switchHandler)
+    subscribe(confirmationSwitch, "switch", confirmationSwitchHandler)
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// This method sets up the app
+    subscribe(person, "presence", presenceChange)
+    state.Flashes = 4
+    initialSunPosition()
+}
+
+def presenceChange(evt){
+	log.debug("presenceChange")
+    // if someone arrives at night the lights will turn on
+    if("present" == evt.value){
+    	timerLight()
+    }
+}
+
+// Function to set lights on timer for person arriving
+def timerLight() {
+	log.debug(state.sunPosition)
+	if(state.sunPosition == "down"){
+    	light.on()
+    	runIn(60 * minutes, turnOff)
+    }
+}
+
+def turnOff(){
+	// This method turns off the ligt
+	theSwitch.off()
+    confirmationSwitch.off()
+}
+
+def initialSunPosition() {  
+	// This method determines if sun is down at time of initializtion and run sunsetHandler() if so
+
+	def s = getSunriseAndSunset(zipCode: "98052")
+	def now = new Date()
+    def riseTime = s.sunrise
+	def setTime = s.sunset
+
+    if(setTime.before(now)) {
+        sunsetHandler()
+        log.info "Sun is already down, run sunsetHandler"
+    }
+    else 
+    {	if (riseTime.after(now)) {
+        sunriseHandler()
+        log.info "Sun is up, run sunriseHandler"
+        }
+    } 
+}
+
+def sunriseHandler() {
+	// method to set the sun position when the sun rises
+    state.sunPosition = "up"
+}
+
+def sunsetHandler() {
+	// method to set the sun position when the sunsets
+    state.sunPosition = "down"
+}
+
+/*
+def switchHandler(evt) {
+	log.debug("switch Handler Fired")
+}
+*/
+def confirmationSwitchHandler(evt) {
+	state.Flashes = state.Flashes - 1
+    log.debug("Flashes: ${state.Flashes}")
+    log.debug("Event State: ${evt.value}")
+	if(evt.value == "on" && state.Flashes > 0) {
+    	runIn(2, turnOffConfirmationSwitch)
+    } else if(evt.value == "off" && state.Flashes > 0) {
+    	runIn(2, turnOnConfirmationSwitch)
+    }
+    
+    if(state.Flashes == 0){
+    	state.Flashes = 4
+    }
+}
+
+def turnOnConfirmationSwitch(){
+	confirmationSwitch.on()
+}
+
+def turnOffConfirmationSwitch(){
+	confirmationSwitch.off()
+}
+
+def switchHandler(evt){
+	log.debug("light Event handler fired")
+	// use Event rather than DeviceState because we may be changing DeviceState to only store changed values
+    def recentStates = theSwitch.eventsSince(new Date(now() - 4000), [all:true, max: 10]).findAll{it.name == "switch"}
+    log.debug "${recentStates?.size()} STATES FOUND, LAST AT ${recentStates ? recentStates[0].dateCreated : ''}"
+	//sendPush("Attempting to check light presses")
+
+    if (evt.value == "on") {
+        log.debug("==== ON ====")
+    }
+
+    log.debug(recentStates.size())
+    //if (evt.isPhysical()) {
+    
+		if (recentStates.size() >= 2) {
+        	 
+            log.debug "Outside light timer mode engaged"
+            def switchattr = confirmationSwitch.currentValue("switch")
+            log.debug "confirmationSwitch: $switchattr"
+            
+            confirmationSwitch.on()
+            
+            //alternativeSwitch.off()
+            //def message = "${location.name} executed ${settings.onPhrase} because ${evt.title} was tapped twice."
+            runIn(60 * minutes, turnOff)
+        } else {
+        	log.trace "Skipping digital on/off event"
+        }
+    
+	//log.debug("switch is on, turn off in $minutes")
+    //runIn(60*minutes, turnOff)
+    
+	//}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")
@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
+	def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
+  if(isIP(callback.host)){
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,6 +852,25 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
+public static boolean isIP(String str) {
+    try {
+         String[] parts = str.split("\\.");
+         if (parts.length != 4) return false;
+         for (int i = 0; i < 4; ++i) {
+             int p
+             try {
+               p = Integer.parseInt(parts[i]);
+             } catch (Exception e) {
+               return false;
+             }
+             if (p > 255 || p < 0) return false;
+         }
+         return true;
+    } catch (Exception e) {
+        return false;
+    }
+}
+
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }

smartapps/thehomeremote-homeremote/home-remote.src/home-remote.groovy

@@ -1,798 +0,0 @@
-/**
- *  Home Remote
- *
- *  Copyright 2015 The Home Remote
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Home Remote",
-    namespace: "thehomeremote.homeremote",
-    author: "The Home Remote",
-    description: "Web service that enables communication between the Home Remote app and a SmartThings hub.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: [displayName: "The Home Remote", displayLink: "http://thehomeremote.com/"])
-
-
-preferences {
-    section() {
-	input "accelerationSensors", "capability.accelerationSensor",title: "Acceleration Sensors", multiple: true, required: false
-	input "alarms", "capability.alarm",title: "Alarms", multiple: true, required: false
-	input "batteries", "capability.battery",title: "Batteries", multiple: true, required: false
-	input "beacons", "capability.beacon",title: "Beacons", multiple: true, required: false
-	input "buttonGroup", "capability.button",title: "Buttons", multiple: true, required: false
-	input "carbonMonoxideDetectors", "capability.carbonMonoxideDetector",title: "CO Detectors", multiple: true, required: false
-	input "colorControls", "capability.colorControl",title: "Color Lights", multiple: true, required: false
-	input "contactSensors", "capability.contactSensor",title: "Contact Sensors", multiple: true, required: false
-	input "doorControls", "capability.doorControl",title: "Door Controllers", multiple: true, required: false
-	input "energyMeters", "capability.energyMeter",title: "Energy Meters", multiple: true, required: false
-	input "illuminanceMeasurements", "capability.illuminanceMeasurement",title: "Illuminance Sensors", multiple: true, required: false
-	input "imageCaptures", "capability.imageCapture",title: "Cameras", multiple: true, required: false
-	input "locks", "capability.lock",title: "Locks", multiple: true, required: false
-	input "mediaControllers", "capability.mediaController",title: "Media Controllers", multiple: true, required: false
-	input "momentaries", "capability.momentary",title: "Momentary Buttons", multiple: true, required: false
-	input "motionSensors", "capability.motionSensor",title: "Motion Sensors", multiple: true, required: false
-	input "musicPlayers", "capability.musicPlayer",title: "Music Players", multiple: true, required: false
-	input "powerMeters", "capability.powerMeter",title: "Power Meters", multiple: true, required: false
-	input "presenceSensors", "capability.presenceSensor",title: "Presence Sensors", multiple: true, required: false
-	input "relativeHumidityMeasurements", "capability.relativeHumidityMeasurement",title: "Humidity Sensors", multiple: true, required: false
-	input "relaySwitches", "capability.relaySwitch",title: "Relays", multiple: true, required: false
-	input "signalStrengths", "capability.signalStrength",title: "Signal Strengths", multiple: true, required: false
-	input "sleepSensors", "capability.sleepSensor",title: "Sleep Sensors", multiple: true, required: false
-	input "smokeDetectors", "capability.smokeDetector",title: "Smoke Detectors", multiple: true, required: false
-	input "speechSyntheses", "capability.speechSynthesis",title: "Speech Syntheses", multiple: true, required: false
-	input "stepSensors", "capability.stepSensor",title: "Step Sensors", multiple: true, required: false
-	input "switches", "capability.switch",title: "Switches", multiple: true, required: false
-	input "switchLevels", "capability.switchLevel",title: "Dimmers", multiple: true, required: false
-	input "temperatureMeasurements", "capability.temperatureMeasurement",title: "Temperature Sensors", multiple: true, required: false
-	input "thermostats", "capability.thermostat",title: "Thermostats", multiple: true, required: false
-	input "threeAxes", "capability.threeAxis",title: "Three axis Sensors", multiple: true, required: false
-	input "tones", "capability.tone",title: "Tones", multiple: true, required: false
-	input "touchSensors", "capability.touchSensor",title: "Touch Sensors", multiple: true, required: false
-	input "valves", "capability.valve",title: "Valves", multiple: true, required: false
-	input "waterSensors", "capability.waterSensor",title: "Water Sensors", multiple: true, required: false
-    }
-}
-
-mappings {
-  path("/GetCurrentValues") {
-    action: [
-      GET: "getCurrentValues"
-    ]
-  }
-  path("/GetCurrentValuesWithDisplayName") {
-    action: [
-      GET: "getCurrentValuesWithDisplayName"
-    ]
-  }
-  path("/GetRoutines") {
-    action: [
-      GET: "getRoutines"
-    ]
-  }
-  path("/ExecuteCommand") {
-    action: [
-      PUT: "executeCommand"
-    ]
-  }
-  path("/ExecuteRoutine") {
-    action: [
-      PUT: "executeRoutine"
-    ]
-  }
-}
-
-def getCurrentValues() {
-    def resp = []    
-        
- 	accelerationSensors.each {
-      resp << [id: it.id, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
-    }
-
-	alarms.each {
-      resp << [id: it.id, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
-    }
-
-	batteries.each {
-      resp << [id: it.id, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
-    }
-
-	beacons.each {
-      resp << [id: it.id, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	buttonGroup.each {
-      resp << [id: it.id, capability: "Button", attribute: "button", value: it.currentValue("button")]
-    }
-
-	carbonMonoxideDetectors.each {
-      resp << [id: it.id, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
-    }
-
-	contactSensors.each {
-      resp << [id: it.id, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	doorControls.each {
-      resp << [id: it.id, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
-    }
-
-	energyMeters.each {
-      resp << [id: it.id, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
-    }
-
-	illuminanceMeasurements.each {
-      resp << [id: it.id, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
-    }
-
-	imageCaptures.each {
-      resp << [id: it.id, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
-    }
-
-	locks.each {
-      resp << [id: it.id, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
-    }
-
-	motionSensors.each {
-      resp << [id: it.id, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
-    }
-
-	powerMeters.each {
-      resp << [id: it.id, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
-    }
-
-	presenceSensors.each {
-      resp << [id: it.id, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	relativeHumidityMeasurements.each {
-      resp << [id: it.id, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
-    }
-
-	relaySwitches.each {
-      resp << [id: it.id, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
-    }
-
-	sleepSensors.each {
-      resp << [id: it.id, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
-    }
-
-	smokeDetectors.each {
-      resp << [id: it.id, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
-    }
-
-	switches.each {
-      resp << [id: it.id, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	switchLevels.each {
-      resp << [id: it.id, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
-    }
-
-	temperatureMeasurements.each {
-      resp << [id: it.id, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
-    }
-
-	threeAxes.each {
-      resp << [id: it.id, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
-    }
-
-	touchSensors.each {
-      resp << [id: it.id, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
-    }
-
-	valves.each {
-      resp << [id: it.id, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	waterSensors.each {
-      resp << [id: it.id, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
-    }
-   
-   	//resp << [id: 0, capability: "Heartbeat", attribute: "heartbeat", value: String.valueOf(state.heartbeat)]
-    
-    state.heartbeat = !state.heartbeat
-    
-    return resp
-}
-
-def getCurrentValuesWithDisplayName() {
-    def resp = []    
-        
- 	accelerationSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
-    }
-
-	alarms.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
-    }
-
-	batteries.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
-    }
-
-	beacons.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	buttonGroup.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Button", attribute: "button", value: it.currentValue("button")]
-    }
-
-	carbonMonoxideDetectors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
-    }
-
-	contactSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	doorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
-    }
-
-	energyMeters.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
-    }
-
-	illuminanceMeasurements.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
-    }
-
-	imageCaptures.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
-    }
-
-	locks.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
-    }
-
-	motionSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
-    }
-
-	powerMeters.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
-    }
-
-	presenceSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	relativeHumidityMeasurements.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
-    }
-
-	relaySwitches.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
-    }
-
-	sleepSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
-    }
-
-	smokeDetectors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
-    }
-
-	switches.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	switchLevels.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
-    }
-
-	temperatureMeasurements.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
-    }
-
-	threeAxes.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
-    }
-
-	touchSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
-    }
-
-	valves.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	waterSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
-    }
-   
-    momentaries.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Momentary", attribute: "", value: ""]
-    }
-   
-    //resp << [id: 0, displayName: "Heartbeat", capability: "Heartbeat", attribute: "heartbeat", value: state.heartbeat]
-    
-    return resp
-}
-
-def getDevices(capability){
-
-	def result
-
-	switch (capability) {
-    	case "Alarm":
-        	result = alarms
-        	break
-    	case "ColorControl":
-        	result = colorControls
-        	break
-    	case "DoorControl":
-        	result = doorControls
-        	break
-        case "ImageCapture":
-        	result = imageCaptures
-        	break
-    	case "Lock":
-        	result = locks
-        	break
-        case "MediaController":
-        	result = mediaControllers
-        	break
-    	case "Momentary":
-        	result = momentaries
-        	break
-        case "MusicPlayer":
-        	result = musicPlayers
-        	break
-        case "RelaySwitch":
-        	result = relaySwitches
-        	break
-    	case "SpeechSynthesis":
-        	result = speechSyntheses
-        	break
-    	case "Switch":
-        	result = switches
-        	break
-        case "SwitchLevel":
-        	result = switchLevels
-        	break
-    	case "Thermostat":
-        	result = thermostats
-        	break
-		case "ThermostatCoolingSetpoint":
-        	result = thermostatCoolingSetpoints
-        	break
-    	case "ThermostatFanMode":
-        	result = thermostatFanModes
-        	break
-        case "ThermostatHeatingSetpoint":
-        	result = thermostatHeatingSetpoints
-        	break
-    	case "ThermostatMode":
-        	result = thermostatModes
-        	break
-    	case "Tone":
-        	result = tones
-        	break
-        case "Valve":
-        	result = valves
-        	break     
-    	default:
-        	result = valves
-	}
-	return result
-}
-
-def getDoorControlCommand(value){
-	def result
-	switch (value) {
-        case "closed":
-        	result = "close"
-        	break
-    	case "open":
-        	result = "open"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getLockCommand(value){
-	def result
-	switch (value) {
-        case "locked":
-        	result = "lock"
-        	break
-    	case "unlocked":
-        	result = "unlock"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getMuteCommand(value){
-	def result
-	switch (value) {
-        case "muted":
-        	result = "mute"
-        	break
-    	case "unmuted":
-        	result = "unmute"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getContactCommand(value){
-	def result
-	switch (value) {
-        case "closed":
-        	result = "close"
-        	break
-    	case "open":
-        	result = "open"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getRoutines() {
-	return location.helloHome?.getPhrases()*.label
-}
-
-def getThermostatFanModeCommand(value){
-	def result
-	switch (value) {
-        case "on":
-        	result = "fanOn"
-        	break
-    	case "auto":
-        	result = "fanAuto"
-        	break
-    	case "circulate":
-        	result = "fanCirculate"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-void executeCommand() {    
-    def deviceId = request.JSON?.deviceId
-    def capability = request.JSON?.capability
-    def attribute = request.JSON?.attribute 
-    def value = request.JSON?.value    
-    if (deviceId) {
-		def devices = getDevices(capability)
-        def command
-        def valueIsParameter = false
-        def valueIsInteger = false
-        switch (attribute) {    	       	
-        	case "hue":
-        		command = "setHue"
-                valueIsParameter = true
-                valueIsInteger = true
-        		break
-    		case "saturation":
-        		command = "setSaturation"
-                valueIsParameter = true
-                valueIsInteger = true
-        		break
-    		case "color":
-        		command = "setColor"
-                def rgb = hexToRgb(value)
-                def hsl = rgbToHSL(rgb)
-                value = [hue:hsl.h.toInteger(), saturation:hsl.s.toInteger()]
-                valueIsParameter = true				
-        		break
-			case "level":
-        		command = "setLevel"
-                valueIsParameter = true
-                valueIsInteger = true
-        		break            
-        	case "heatingSetpoint":
-        		command = "setHeatingSetpoint"
-                valueIsParameter = true
-        		break    
-       		case "coolingSetpoint":
-        		command = "setCoolingSetpoint"
-                valueIsParameter = true
-        		break
-          	case "currentActivity":
-        		command = "startActivity"
-                valueIsParameter = true
-        		break  
- 	  		case "door":
-        		command = getDoorControlCommand(value)
-        		break    
-      		case "lock":
-        		command = getLockCommand(value)
-        		break           
-      		case "mute":
-        		command = getMuteCommand(value)
-        		break         
-      		case "thermostatFanMode":
-        		command = getThermostatFanModeCommand(value)
-        		break         
-       		case "thermostatMode":
-        		if (value == "emergency heat") {
-                	command = "emergencyHeat"
-           		}
-                else
-                {
-                    command = value
-                }
-        		break     
-      		case "contact":
-        		command = getContactCommand(value)
-        		break
-    		default:
-        		command = value
-		}
-        devices.each {
-        	if (it.id == deviceId) {
-                // check that the device supports the specified command
-                // If not, return an error using httpError, providing a HTTP status code.
-            	if (!it.hasCommand(command)) {
-                	httpError(501, "$command is not a valid command for the device")
-            	}                
-                if(valueIsParameter){
-                	if(valueIsInteger){
-                		it."$command"(value as int)
-                	}
-                	else{
-                		it."$command"(value)
-                	}   
-                }
-                else{
-                	it."$command"()
-                }   
-           }       
-        }
-    }
-}
-
-void executeRoutine() {   
-	def routine = request.JSON?.routine
-    location.helloHome?.execute(routine)
-}
-
-def rgbToHSL(rgb) {
-	def r = rgb.r / 255
-    def g = rgb.g / 255
-    def b = rgb.b / 255
-    def h = 0
-    def s = 0
-    def l = 0
-    
-    def var_min = [r,g,b].min()
-    def var_max = [r,g,b].max()
-    def del_max = var_max - var_min
-    
-    l = (var_max + var_min) / 2
-    
-    if (del_max == 0) {
-            h = 0
-            s = 0
-    } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
-        else { s = del_max / (2 - var_max - var_min) }
-
-        def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
-        def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
-        def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
-
-        if (r == var_max) { h = del_b - del_g } 
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
-        else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-        
-		if (h < 0) { h += 1 }
-        if (h > 1) { h -= 1 }
-	}
-    def hsl = [:]    
-    hsl = [h: h * 100, s: s * 100, l: l]
-    
-    hsl
-}
-
-def hexToRgb(colorHex) {
-	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
-    def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
-    def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-    
-    def colorData = [:]
-    colorData = [r: rrInt, g: ggInt, b: bbInt]
-    colorData
-}
-
-def installed() {
-	state.heartbeat = false
-}
-
-def updated() {
-	state.heartbeat = false
-}