MSA-1413: A simple notification SmartApp which will send a push notification on smart lock being locked or unlocked. Supports multiple locks

Fix: Gentle Wake Up requires contact input for Contact Book users [DVCSMP-1904]

devicetypes/living-room/fan.src/fan.groovy

@@ -1,47 +0,0 @@
-/**
- *  Fan
- *
- *  Copyright 2016 Mike
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fan", namespace: "Living Room", author: "Mike") {
-		capability "Switch"
-	}
-
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'switch' attribute
-
-}
-
-// handle commands
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,7 +255,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,7 +271,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -240,7 +240,8 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,7 +338,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,7 +234,8 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -229,7 +230,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,7 +205,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -223,7 +223,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -35,6 +35,7 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
+		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -174,7 +175,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
 	[event, response(cmds)]
 }

smartapps/nirajbhatt7/smartlock-notification.src/smartlock-notification.groovy

@@ -1,7 +1,7 @@
 /**
- *  Fan
+ *  SmartLock Notification
  *
- *  Copyright 2016 Mike
+ *  Copyright 2016 Someone
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,19 +14,19 @@
  *
  */
 definition(
-    name: "Fan",
+    name: "SmartLock Notification",
-    namespace: "Living Room",
+    namespace: "nirajbhatt7",
-    author: "Mike",
+    author: "Someone",
-    description: "Turn Fan on/off",
+    description: "Sends push notification on the lock/unlock.",
-    category: "Convenience",
+    category: "Safety & Security",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
     iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
 
 
 preferences {
-	section("Title") {
+	section("Select Smart Lock/s") {
-		// TODO: put inputs here
+		input "theLock", "capability.lock", title:"door lock", required: true, multiple: true
 	}
 }
 
@@ -45,6 +45,30 @@ def updated() {
 
 def initialize() {
 	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(theLock, "lock", lockHandler)
+}
+
+def lockHandler(evt) {
+  sendPush("The ${evt.displayName} is ${evt.value}!")
+  
+  // just for debugging  
+  log.debug "lock is ${evt.name}"
+  log.debug "event data: ${evt.data}"
+  log.debug "event display name: ${evt.displayName}"
+  log.debug "Is this event a state change? ${evt.isStateChange()}"
+  try {
+        log.debug "The jsonValue of this event is ${evt.jsonValue}"
+    } catch (e) {
+        log.debug "Trying to get the jsonValue for ${evt.name} threw an exception: $e"
+    }
+  
+  log.debug "The source of this event is: ${evt.source}"
+  log.debug "event from physical actuation? ${evt.isPhysical()}"
+  
+  log.debug "lock status changed to ${evt.value}"
+  
+  
+  
+  
 }
 
-// TODO: implement event handlers

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -237,7 +237,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to") {
+			input("recipients", "contact", title: "Send notifications to", required: false) {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}