Merge pull request #1171 from SmartThingsCommunity/staging

Rolling up staging to prod for deploy

devicetypes/living-room/fan.src/fan.groovy

@@ -1,47 +0,0 @@
-/**
- *  Fan
- *
- *  Copyright 2016 Mike
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Fan", namespace: "Living Room", author: "Mike") {
-		capability "Switch"
-	}
-
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'switch' attribute
-
-}
-
-// handle commands
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,13 +22,13 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
+		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -327,9 +327,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []
@@ -356,7 +353,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2
 

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		command "configureAfterSecure"
 
@@ -248,8 +247,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,8 +64,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -747,8 +749,16 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    return boseRefreshNowPlaying()
+    // Fix to get faster update of power status back from speaker after sending on/off
+    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    // Note: This is a temporary hack that should be replaced by a re-design of the
+    // DTH to use sendHubCommand for all commands
+    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
+    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
+    sendHubCommand(boseGET("/now_playing"))
+    if (enable) {
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+    }
 }
 
 /**
@@ -787,10 +797,11 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    log.warn "boseConfirmPowerOn() attempt #" + tries
-    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
     }
     return result
 }

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -23,6 +23,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -66,6 +67,12 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -85,6 +92,21 @@ def setLevel(value) {
     zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.levelRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
@@ -95,5 +117,6 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -21,7 +21,9 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint inClusters: "0x26"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {
@@ -42,6 +44,10 @@ metadata {
 		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -70,11 +76,28 @@ metadata {
 		}
 
 		main(["switch"])
-		details(["switch", "level", "indicator", "refresh"])
+		details(["switch", "level", "refresh"])
 
 	}
 }
 
+def updated(){
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
@@ -202,19 +225,19 @@ def refresh() {
 	delayBetween(commands,100)
 }
 
-def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on")
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+void indicatorWhenOn() {
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off")
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+void indicatorWhenOff() {
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never")
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+void indicatorNever() {
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {
@@ -224,4 +247,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -43,7 +43,7 @@ metadata {
 		}
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -51,7 +51,7 @@ metadata {
 		}
 
 		main(["rich-control"])
-		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+		details(["rich-control", "reset", "refresh"])
 	}
 }
 
@@ -75,118 +75,78 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setLevel(this, percent)
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
+	    log.trace parent.setSaturation(this, percent)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
+	    log.trace parent.setHue(this, percent)
     }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
-        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
+	def value = [hue:20, saturation:2]
+	setAdjustedColor(value)
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
     } else {
-        log.warn "Invalid color input"
-    }
-}
-
-void setColorTemperature(value) {
-    if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
-    } else {
-        log.warn "Invalid color temperature"
+        log.warn "Invalid color input $value"
     }
 }
 
@@ -195,22 +155,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
 
 def verifyPercent(percent) {
     if (percent == null)

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,8 +7,13 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		attribute "serialNumber", "string"
 		attribute "networkAddress", "string"
+        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+        // Possible values "Online" or "Offline"
+		attribute "status", "string"
+		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
+		// This is also used in the Hue application as ID
+		attribute "idNumber", "string"
 	}
 
 	simulator {
@@ -17,22 +22,23 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
-	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
+			tileAttribute ("device.status", key: "PRIMARY_CONTROL") {
+				attributeState "Offline", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#ffffff"
+	            attributeState "Online", label: '${currentValue}', action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#79b821"
 			}
-	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
-	            attributeState "default", label:'SN: ${currentValue}'
 			}
-        }
-		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
-			state "default", label:'SN: ${currentValue}'
+		valueTile("doNotRemove", "v", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'If removed, Hue lights will not work properly'
 		}
-		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 4, inactiveLabel: false) {
-			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
+		valueTile("idNumber", "device.idNumber", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'ID: ${currentValue}'
+		}
+		valueTile("networkAddress", "device.networkAddress", decoration: "flat", height: 2, width: 6, inactiveLabel: false) {
+			state "default", label:'IP: ${currentValue}'
 		}
 
 		main (["rich-control"])
-		details(["rich-control", "networkAddress"])
+		details(["rich-control", "doNotRemove", "idNumber", "networkAddress"])
 	}
 }
 

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -43,16 +43,16 @@ metadata {
 			}
 		}
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
+    controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        state "colorTemperature", action:"color temperature.setColorTemperature"
+    }
 
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
+    valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        state "colorTemperature", label: 'WHITES'
+    }
 
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
+			state "default", label:"Reset To White", action:"reset", icon:"st.lights.philips.hue-single"
 		}
 
 		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -84,118 +84,86 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
-}
-
-void nextLevel() {
-	def level = device.latestValue("level") as Integer ?: 0
-	if (level <= 100) {
-		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-	}
-	else {
-		level = 25
-	}
-	setLevel(level)
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (verifyPercent(percent)) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setLevel(this, percent)
     }
 }
 
 void setSaturation(percent) {
     log.debug "Executing 'setSaturation'"
     if (verifyPercent(percent)) {
-        parent.setSaturation(this, percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
+	    log.trace parent.setSaturation(this, percent)
     }
 }
 
 void setHue(percent) {
     log.debug "Executing 'setHue'"
     if (verifyPercent(percent)) {
-        parent.setHue(this, percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
+	    log.trace parent.setHue(this, percent)
     }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
     def events = []
     def validValues = [:]
 
     if (verifyPercent(value.hue)) {
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
         validValues.hue = value.hue
     }
     if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
         validValues.saturation = value.saturation
     }
     if (value.hex != null) {
         if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
             validValues.hex = value.hex
         } else {
             log.warn "$value.hex is not a valid color"
         }
     }
     if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
         validValues.level = value.level
     }
     if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
         validValues.switch = "off"
     } else {
-        events << createEvent(name: "switch", value: "on")
         validValues.switch = "on"
     }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
+    if (!validValues.isEmpty()) {
+	    log.trace parent.setColor(this, validValues)
     }
 }
 
 void reset() {
     log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
-    setAdjustedColor(value)
-    parent.poll()
+	setColorTemperature(4000)
 }
 
 void setAdjustedColor(value) {
     if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
-        setColor(adjusted)
+	    setColor(adjusted)
     } else {
-        log.warn "Invalid color input"
+        log.warn "Invalid color input $value"
     }
 }
 
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
+	    log.trace parent.setColorTemperature(this, value)
     } else {
-        log.warn "Invalid color temperature"
+        log.warn "Invalid color temperature $value"
     }
 }
 
@@ -204,23 +172,6 @@ void refresh() {
     parent.manualRefresh()
 }
 
-def adjustOutgoingHue(percent) {
-	def adjusted = percent
-	if (percent > 31) {
-		if (percent < 63.0) {
-			adjusted = percent + (7 * (percent -30 ) / 32)
-		}
-		else if (percent < 73.0) {
-			adjusted = 69 + (5 * (percent - 62) / 10)
-		}
-		else {
-			adjusted = percent + (2 * (100 - percent) / 28)
-		}
-	}
-	log.info "percent: $percent, adjusted: $adjusted"
-	adjusted
-}
-
 def verifyPercent(percent) {
     if (percent == null)
         return false

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -68,20 +68,16 @@ def parse(description) {
 // handle commands
 void on() {
 	log.trace parent.on(this)
-	sendEvent(name: "switch", value: "on")
 }
 
 void off() {
 	log.trace parent.off(this)
-	sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
 		parent.setLevel(this, percent)
-		sendEvent(name: "level", value: percent)
-		sendEvent(name: "switch", value: "on")
 	} else {
     	log.warn "$percent is not 0-100"
     }

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -36,12 +36,12 @@ metadata {
             }
         }
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2200..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
 
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+            state "colorTemperature", label: 'WHITES'
         }
 
         standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
@@ -73,20 +73,16 @@ def parse(description) {
 // handle commands
 void on() {
     log.trace parent.on(this)
-    sendEvent(name: "switch", value: "on")
 }
 
 void off() {
     log.trace parent.off(this)
-    sendEvent(name: "switch", value: "off")
 }
 
 void setLevel(percent) {
     log.debug "Executing 'setLevel'"
     if (percent != null && percent >= 0 && percent <= 100) {
-        parent.setLevel(this, percent)
-        sendEvent(name: "level", value: percent)
-        sendEvent(name: "switch", value: "on")
+        log.trace parent.setLevel(this, percent)
     } else {
         log.warn "$percent is not 0-100"
     }
@@ -95,9 +91,7 @@ void setLevel(percent) {
 void setColorTemperature(value) {
     if (value) {
         log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
+        log.trace parent.setColorTemperature(this, value)
     } else {
         log.warn "Invalid color temperature"
     }
@@ -107,4 +101,3 @@ void refresh() {
     log.debug "Executing 'refresh'"
     parent.manualRefresh()
 }
-

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -143,51 +144,14 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0030': // Closed/No Motion/Dry
-            log.debug 'no motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
 
-        case '0x0032': // Open/Motion/Wet
-            log.debug 'motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
+	resultMap.name = 'motion'
+	resultMap.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
-        case '0x0032': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0033': // Battery Alarm
-            break
-
-        case '0x0034': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
-
-        case '0x0035': // Restore Report
-            break
-
-        case '0x0036': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0038': // Test Mode
-            break
-    }
-    return resultMap
+	return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,7 +13,10 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
     	capability "Battery"
@@ -219,40 +222,33 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	List parsedMsg = description.split(" ")
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	log.debug "parseIasMessage: $description"
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	// Relevant bit field definitions from ZigBee spec
-	def BATTERY_BIT = ( 1 << 3 )
-	def TROUBLE_BIT = ( 1 << 6 )
-	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
-
-	// Convert hex string to integer
-	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
-
-	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
+	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zoneStatus & TROUBLE_BIT) {
+	 if (zs.isTroubleSet()) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zoneStatus & BATTERY_BIT) {
+		 if (zs.isBatterySet()) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -270,9 +266,6 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
-	resultMap_sensor.name = "contact"
-	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
-
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,6 +101,12 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			// Temporary fix for the case when Device is OFFLINE and is connected again
+			if (state.lastActivity == null){
+				state.lastActivity = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+			}
+			state.lastActivity = now()
 		}
 	}
 	else {
@@ -116,13 +122,27 @@ def off() {
 def on() {
 	zigbee.on()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.onOffRefresh()
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false)
+	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -98,6 +101,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -169,42 +179,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0022': // Tamper Alarm
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
 def getTemperature(value) {
@@ -255,7 +232,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -300,6 +278,21 @@ private Map getMoistureResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -311,7 +304,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
 
@@ -102,6 +105,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -182,44 +192,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0025': // Restore Report
-			break
-
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -271,7 +247,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -312,6 +289,21 @@ private Map getMotionResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else { 
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "refresh called"
 	def refreshCmds = [
@@ -323,7 +315,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,6 +15,7 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -24,7 +25,7 @@ metadata {
         capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Sensor"
-        
+
         command "enrollResponse"
 
 	}
@@ -73,7 +74,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -87,10 +88,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
 	    map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -128,7 +129,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -141,7 +142,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,11 +154,11 @@ private Map parseReportAttributeMessage(String description) {
     else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
     	def value = descMap.value.endsWith("01") ? "active" : "inactive"
     	resultMap = getMotionResult(value)
-    } 
- 
+    }
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -168,44 +169,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0025': // Restore Report
-            break
-
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -240,7 +205,8 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -13,6 +13,7 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -126,6 +127,13 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -224,47 +232,13 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+
 			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 			}
-		break
 
-		case '0x0021': // Open/Motion/Wet
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0022': // Tamper Alarm
-		break
-
-		case '0x0023': // Battery Alarm
-		break
-
-		case '0x0024': // Supervision Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
-
-		case '0x0025': // Restore Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0026': // Trouble/Failure
-		break
-
-		case '0x0028': // Test Mode
-		break
-	}
 	return resultMap
 }
 
@@ -338,7 +312,8 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				result.value = Math.min(100, (int) pct * 100)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}
@@ -396,6 +371,21 @@ private getAccelerationResult(numValue) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Values "
 
@@ -423,7 +413,7 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,6 +14,7 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,6 +25,7 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -171,40 +173,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0022': // Tamper Alarm
-        break
-
-        case '0x0023': // Battery Alarm
-        break
-
-        case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0026': // Trouble/Failure
-        break
-
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {
@@ -234,7 +205,8 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			result.value = Math.min(100, (int) pct * 100)
+			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,7 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
@@ -22,24 +23,25 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Health Check"
-        
+		capability "Sensor"
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles(scale: 2) {
 		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
@@ -72,10 +74,10 @@ metadata {
 		details(["contact","temperature","battery","refresh"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -89,10 +91,17 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -100,7 +109,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -126,7 +135,7 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
@@ -136,14 +145,14 @@ private boolean shouldProcessMessage(cluster) {
 private int getHumidity(value) {
     return Math.round(Double.parseDouble(value))
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -152,10 +161,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -166,42 +175,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -214,11 +191,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
     if (rawValue == 0 || rawValue == 255) {}
@@ -229,7 +206,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -263,6 +241,21 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
@@ -274,8 +267,8 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-	
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -82,6 +83,13 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
+	// Temporary fix for the case when Device is OFFLINE and is connected again
+	if (state.lastActivity == null){
+		state.lastActivity = now()
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+	state.lastActivity = now()
+
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -205,7 +213,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -237,6 +246,20 @@ private Map getHumidityResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+		state.lastActivity = null
+		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+	} else {
+		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+	}
+}
+
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
@@ -252,7 +275,7 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,6 +16,8 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,6 +1,8 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
+		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,6 +15,8 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
+		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
+		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,6 +16,8 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,6 +16,7 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
+		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,6 +16,8 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
+		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,8 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
@@ -21,28 +22,28 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-        
+
 		command "enrollResponse"
- 
- 
+
+
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
 	}
- 
+
 	simulator {
- 
+
 	}
 
 	preferences {
 		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 	}
- 
+
 	tiles {
     	standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
-    	
+
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
@@ -58,23 +59,23 @@ metadata {
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-        
+
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-        
+
 		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
- 
+
 		main (["contact", "temperature"])
 		details(["contact","temperature","battery","refresh","configure"])
 	}
 }
- 
+
 def parse(String description) {
 	log.debug "description: $description"
-    
+
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -88,10 +89,10 @@ def parse(String description) {
     else if (description?.startsWith('zone status')) {
     	map = parseIasMessage(description)
     }
- 
+
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-    
+
     if (description?.startsWith('enroll request')) {
     	List cmds = enrollResponse()
         log.debug "enroll response: ${cmds}"
@@ -99,7 +100,7 @@ def parse(String description) {
     }
     return result
 }
- 
+
 private Map parseCatchAllMessage(String description) {
     Map resultMap = [:]
     def cluster = zigbee.parse(description)
@@ -125,20 +126,20 @@ private Map parseCatchAllMessage(String description) {
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
     // 0x07 is bind message
-    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
         cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
- 
+
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
- 
+
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -147,10 +148,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
- 
+
 	return resultMap
 }
- 
+
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -161,42 +162,11 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
- 
+
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
@@ -209,11 +179,11 @@ def getTemperature(value) {
 private Map getBatteryResult(rawValue) {
 	log.debug 'Battery'
 	def linkText = getLinkText(device)
-    
+
     def result = [
     	name: 'battery'
     ]
-    
+
 	def volts = rawValue / 10
 	def descriptionText
 	if (volts > 3.5) {
@@ -223,7 +193,8 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 
@@ -261,7 +232,7 @@ def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
 	[
-    
+
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
@@ -274,24 +245,24 @@ def configure() {
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
     	"delay 1000",
-        
+
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
+
         "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
         "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-        
-        
+
+
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
 		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-        
+
         "delay 500"
 	]
     return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
@@ -299,11 +270,11 @@ def configure() {
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
-    [	
-    	
+    [
+
 	"raw 0x500 {01 23 00 00 00}", "delay 200",
     "send 0x${device.deviceNetworkId} 1 1"
-        
+
     ]
 }
 private hex(value) {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -1,8 +1,7 @@
 /**
- *  Iris Smart Fob
+ *  ZigBee Button
  *
  *  Copyright 2015 Mitch Pond
- *	Presence code adapted from SmartThings Arrival Sensor HA device type
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -14,181 +13,235 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
 metadata {
-	definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
-		capability "Battery"
-		capability "Button"
+    definition (name: "ZigBee Button", namespace: "smartthings", author: "Mitch Pond") {
+        capability "Actuator"
+        capability "Battery"
+        capability "Button"
         capability "Configuration"
-		capability "Presence Sensor"
-		capability "Sensor"
-        
-		//fingerprint endpointId: "01", profileId: "0104", inClusters: "0000,0001,0003,0007,0020,0B05", outClusters: "0003,0006,0019", model:"3450-L", manufacturer: "CentraLite"
-	}
-    
-    preferences{
-	    input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"",
-    		defaultValue: 3, displayDuringSetup: false)
-        input "checkInterval", "enum", title: "Presence timeout (minutes)",
-            defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
-        input "logging", "bool", title: "Enable debug logging",
-            defaultValue: false, displayDuringSetup: false
+        capability "Refresh"
+        capability "Sensor"
+
+        command "enrollResponse"
+
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
+        //fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
     }
 
-	tiles(scale: 2) {
-    	standardTile("presence", "device.presence", width: 4, height: 4, canChangeBackground: true) {
-            state "present", label: "Present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-            state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
-        }
-    	standardTile("button", "device.button", decoration: "flat", width: 2, height: 2) {
-        	state "default", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-        }
-		valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
+    simulator {}
 
-		main (["presence"])
-		details(["presence","button","battery"])
-	}
+    preferences {
+        section {
+            input ("holdTime", "number", title: "Minimum time in seconds for a press to count as \"held\"", defaultValue: 1, displayDuringSetup: false)
+        }
+    }
+
+    tiles {
+        standardTile("button", "device.button", width: 2, height: 2) {
+            state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+            state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
+        }
+
+        valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
+            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main (["button"])
+        details(["button", "battery", "refresh"])
+    }
 }
 
 def parse(String description) {
-    def descMap = zigbee.parseDescriptionAsMap(description)
-    logIt descMap
-    state.lastCheckin = now()
-    logIt "lastCheckin = ${state.lastCheckin}"
-    handlePresenceEvent(true)
-    
-	def results = []
-    if (description?.startsWith('catchall:'))
-		results = parseCatchAllMessage(descMap)
-	else if (description?.startsWith('read attr -'))
-		results = parseReportAttributeMessage(descMap)
-    else logIt(descMap, "trace")
-        
-	return results;
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+            def descMap = zigbee.parseDescriptionAsMap(description)
+            if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
+                event = getBatteryResult(zigbee.convertHexToInt(descMap.value))
+            }
+            else if (descMap.clusterInt == 0x0006 || descMap.clusterInt == 0x0008) {
+                event = parseNonIasButtonMessage(descMap)
+            }
+        }
+        else if (description?.startsWith('zone status')) {
+            event = parseIasButtonMessage(description)
+        }
+
+        log.debug "Parse returned $event"
+        def result = event ? createEvent(event) : []
+
+        if (description?.startsWith('enroll request')) {
+            List cmds = enrollResponse()
+            result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+        }
+        return result
+    }
+}
+
+private Map parseIasButtonMessage(String description) {
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
+}
+
+private Map getBatteryResult(rawValue) {
+    log.debug 'Battery'
+    def volts = rawValue / 10
+    if (volts > 3.0 || volts == 0 || rawValue == 0xFF) {
+        return [:]
+    }
+    else {
+        def result = [
+                name: 'battery'
+        ]
+        def minVolts = 2.1
+        def maxVolts = 3.0
+        def pct = (volts - minVolts) / (maxVolts - minVolts)
+        result.value = Math.min(100, (int) pct * 100)
+        def linkText = getLinkText(device)
+        result.descriptionText = "${linkText} battery was ${result.value}%"
+        return result
+    }
+}
+
+private Map parseNonIasButtonMessage(Map descMap){
+    def buttonState = ""
+    def buttonNumber = 0
+    if (((device.getDataValue("model") == "3460-L") || (device.getDataValue("model") == "3450-L"))
+            &&(descMap.clusterInt == 0x0006)) {
+        if (descMap.command == "01") {
+            getButtonResult("press")
+        }
+        else if (descMap.command == "00") {
+            getButtonResult("release")
+        }
+    }
+    else if (descMap.clusterInt == 0x0006) {
+        buttonState = "pushed"
+        if (descMap.command == "01") {
+            buttonNumber = 1
+        }
+        else if (descMap.command == "00") {
+            buttonNumber = 2
+        }
+        if (buttonNumber !=0) {
+            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
+            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
+        }
+        else {
+            return [:]
+        }
+    }
+    else if (descMap.clusterInt == 0x0008) {
+        if (descMap.command == "05") {
+            state.buttonNumber = 1
+            getButtonResult("press", 1)
+        }
+        else if (descMap.command == "01") {
+            state.buttonNumber = 2
+            getButtonResult("press", 2)
+        }
+        else if (descMap.command == "03") {
+            getButtonResult("release", state.buttonNumber)
+        }
+    }
+}
+
+def refresh() {
+    log.debug "Refreshing Battery"
+
+    return zigbee.readAttribute(0x0001, 0x20) +
+            zigbee.enrollResponse()
+}
+
+def configure() {
+    log.debug "Configuring Reporting, IAS CIE, and Bindings."
+    def cmds = []
+    if (device.getDataValue("model") == "3450-L") {
+        cmds << [
+                "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 300",
+                "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 300"
+        ]
+    }
+    return zigbee.onOffConfig() +
+            zigbee.levelConfig() +
+            zigbee.configureReporting(0x0001, 0x20, 0x20, 30, 21600, 0x01) +
+            zigbee.enrollResponse() +
+            zigbee.readAttribute(0x0001, 0x20) +
+            cmds
+
+}
+
+private Map getButtonResult(buttonState, buttonNumber = 1) {
+    if (buttonState == 'release') {
+        log.debug "Button was value : $buttonState"
+        def timeDiff = now() - state.pressTime
+        log.info "timeDiff: $timeDiff"
+        def holdPreference = holdTime ?: 1
+        log.info "holdp1 : $holdPreference"
+        holdPreference = (holdPreference as int) * 1000
+        log.info "holdp2 : $holdPreference"
+        if (timeDiff > 10000) {         //timeDiff>10sec check for refresh sending release value causing actions to be executed
+            return [:]
+        }
+        else {
+            if (timeDiff < holdPreference) {
+                buttonState = "pushed"
+            }
+            else {
+                buttonState = "held"
+            }
+            def descriptionText = "$device.displayName button $buttonNumber was $buttonState"
+            return createEvent(name: "button", value: buttonState, data: [buttonNumber: buttonNumber], descriptionText: descriptionText, isStateChange: true)
+        }
+    }
+    else if (buttonState == 'press') {
+        log.debug "Button was value : $buttonState"
+        state.pressTime = now()
+        log.info "presstime: ${state.pressTime}"
+        return [:]
+    }
+}
+
+def installed() {
+    initialize()
 }
 
 def updated() {
-	startTimer()
-    configure()
+    initialize()
 }
 
-def configure(){
-	logIt "Configuring Smart Fob..."
-	[
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 2 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 3 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 4 1 6 {${device.zigbeeId}} {}", "delay 200",
-    "zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 200"
-    ] +
-    zigbee.configureReporting(0x0001,0x0020,0x20,20,20,0x01)
-}
-
-def parseCatchAllMessage(descMap) {
-    if (descMap?.clusterId == "0006" && descMap?.command == "01") 		//button pressed
-    	handleButtonPress(descMap.sourceEndpoint as int)
-    else if (descMap?.clusterId == "0006" && descMap?.command == "00") 	//button released
-    	handleButtonRelease(descMap.sourceEndpoint as int)
-    else logIt("Parse: Unhandled message: ${descMap}","trace")
-}
-
-def parseReportAttributeMessage(descMap) {
-	if (descMap?.cluster == "0001" && descMap?.attrId == "0020") createBatteryEvent(getBatteryLevel(descMap.value))
-    else logIt descMap
-}
-
-private createBatteryEvent(percent) {
-	logIt "Battery level at " + percent
-	return createEvent([name: "battery", value: percent])
-}
-
-//this method determines if a press should count as a push or a hold and returns the relevant event type
-private handleButtonRelease(button) {
-	logIt "lastPress state variable: ${state.lastPress}"
-    def sequenceError = {logIt("Uh oh...missed a message? Dropping this event.", "error"); state.lastPress = null; return []}	
-    
-    if (!state.lastPress) return sequenceError()
-	else if (state.lastPress.button != button) return sequenceError()
-    
-    def currentTime = now()
-    def startOfPress = state.lastPress?.time
-    def timeDif = currentTime - startOfPress
-    def holdTimeMillisec = (settings.holdTime?:3).toInteger() * 1000
-    
-    state.lastPress = null	//we're done with this. clear it to make error conditions easier to catch
-    
-    if (timeDif < 0) 
-    //likely a message sequence issue or dropped packet. Drop this press and wait for another.
-    	return sequenceError()
-    else if (timeDif < holdTimeMillisec)
-    	return createButtonEvent(button,"pushed")
-    else 
-    	return createButtonEvent(button,"held")
-}
-
-private handleButtonPress(button) {
-	state.lastPress = [button: button, time: now()]
-}
-
-private createButtonEvent(button,action) {
-	logIt "Button ${button} ${action}"
-	return createEvent([
-    	name: "button",
-        value: action, 
-        data:[buttonNumber: button], 
-        descriptionText: "${device.displayName} button ${button} was ${action}",
-        isStateChange: true, 
-        displayed: true])
-}
-
-private getBatteryLevel(rawValue) {
-	def intValue = Integer.parseInt(rawValue,16)
-	def min = 2.1
-    def max = 3.0
-    def vBatt = intValue / 10
-    return ((vBatt - min) / (max - min) * 100) as int
-}
-
-private handlePresenceEvent(present) {
-    def wasPresent = device.currentState("presence")?.value == "present"
-    if (!wasPresent && present) {
-        logIt "Sensor is present"
-        startTimer()
-    } else if (!present) {
-        logIt "Sensor is not present"
-        stopTimer()
+def initialize() {
+    if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
+        sendEvent(name: "numberOfButtons", value: 2)
     }
-    def linkText = getLinkText(device)
-    def eventMap = [
-        name: "presence",
-        value: present ? "present" : "not present",
-        linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
-    ]
-    logIt "Creating presence event: ${eventMap}"
-    sendEvent(eventMap)
-}
-
-private startTimer() {
-    logIt "Scheduling periodic timer"
-    schedule("0 * * * * ?", checkPresenceCallback)
-}
-
-private stopTimer() {
-    logIt "Stopping periodic timer"
-    unschedule()
-}
-
-def checkPresenceCallback() {
-    def timeSinceLastCheckin = (now() - state.lastCheckin) / 1000
-    def theCheckInterval = (checkInterval ? checkInterval as int : 2) * 60
-    logIt "Sensor checked in ${timeSinceLastCheckin} seconds ago"
-    if (timeSinceLastCheckin >= theCheckInterval) {
-        handlePresenceEvent(false)
+    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
+            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
+        sendEvent(name: "numberOfButtons", value: 1)
     }
+    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
+        sendEvent(name: "numberOfButtons", value: 4)
+    }
+    else {
+        //default. can be changed
+        sendEvent(name: "numberOfButtons", value: 4)
+    }
+
 }
-
-// ****** Utility functions ******
-
-private logIt(str, logLevel = 'debug') {if (settings.logging) log."$logLevel"(str) }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -19,6 +19,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
@@ -53,7 +54,16 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        sendEvent(event)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
+        if (event.name=="level" && event.value==0) {}
+        else {
+            sendEvent(event)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -72,6 +82,20 @@ def on() {
 def setLevel(value) {
     zigbee.setLevel(value)
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
@@ -79,5 +103,7 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -27,6 +27,10 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
+
+        attribute "colorName", "string"
+        command "setGenericName"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
@@ -54,15 +58,15 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
         }
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
@@ -78,10 +82,22 @@ private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 def parse(String description) {
     log.debug "description is $description"
 
-    def finalResult = zigbee.getEvent(description)
-    if (finalResult) {
-        log.debug finalResult
-        sendEvent(finalResult)
+    def event = zigbee.getEvent(description)
+    if (event) {
+        log.debug event
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
+        }
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
@@ -110,20 +126,54 @@ def on() {
 def off() {
     zigbee.off()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
 
 def refresh() {
-    zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
+    setGenericName(value)
     zigbee.setColorTemperature(value)
 }
 
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else if (value >= 5000) {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}
+
 def setLevel(value) {
     zigbee.setLevel(value)
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,100 +11,133 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-/*
- * Capabilities
- * - Battery
- * - Configuration
- * - Refresh
- * - Switch
- * - Valve
-*/
 
 metadata {
-	definition (name: "Zigbee Valve", namespace: "smartthings", author: "SmartThings") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Switch"
-		capability "Valve"
+    definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Battery"
+        capability "Configuration"
+        capability "Power Source"
+        capability "Refresh"
+        capability "Valve"
 
-		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0020,0006,0B02", outClusters: "0003"
-	}
+        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0006, 0020, 0B02, FC02", outClusters: "0019", manufacturer: "WAXMAN", model: "leakSMART Water Valve v2.10", deviceJoinName: "leakSMART Valve"
+        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0004, 0005, 0006, 0008, 000F, 0020, 0B02", outClusters: "0003, 0019", manufacturer: "WAXMAN", model: "House Water Valve - MDL-TBD", deviceJoinName: "Waxman House Water Valve"
+    }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: 'closed', action: "switch.on", icon: "st.Outdoor.outdoor16", backgroundColor: "#e86d13"
-			state "on", label: 'open', action: "switch.off", icon: "st.Outdoor.outdoor16", backgroundColor: "#53a7c0"
-		}
-		main "switch"
-		details(["switch"])
-	}
+    tiles(scale: 2) {
+        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+                attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+                attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+                attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+                attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+            }
+            tileAttribute ("powerSource", key: "SECONDARY_CONTROL") {
+                attributeState "powerSource", label:'Power Source: ${currentValue}'
+            }
+        }
+
+        valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["valve"])
+        details(["valve", "battery", "refresh"])
+    }
 }
 
+private getCLUSTER_BASIC() { 0x0000 }
+private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
+private getCLUSTER_POWER() { 0x0001 }
+private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.info description
-	if (description?.startsWith("catchall:")) {
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-        def msg = zigbee.parse(description)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-		log.trace msg
-		log.trace "data: $msg.data"
-	}
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}
-}
-
-// Commands to device
-def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-}
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if(event.name == "switch") {
+            event.name = "contact"                  //0006 cluster in valve is tied to contact
+            if(event.value == "on") {
+                event.value = "open"
+            }
+            else if(event.value == "off") {
+                event.value = "closed"
+            }
+        }
+        sendEvent(event)
+    }
+    else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap.clusterInt == CLUSTER_BASIC && descMap.attrInt == BASIC_ATTR_POWER_SOURCE){
+            def value = descMap.value
+            if (value == "01" || value == "02") {
+                sendEvent(name: "powerSource", value: "Mains")
+            }
+            else if (value == "03") {
+                sendEvent(name: "powerSource", value: "Battery")
+            }
+            else if (value == "04") {
+                sendEvent(name: "powerSource", value: "DC")
+            }
+            else {
+                sendEvent(name: "powerSource", value: "Unknown")
+            }
+        }
+        else if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
+            event.name = "battery"
+            event.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
+            sendEvent(event)
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug descMap
+        }
+    }
 }
 
 def open() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+    zigbee.on()
 }
 
 def close() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    zigbee.off()
 }
 
 def refresh() {
-	log.debug "sending refresh command"
-	"st rattr 0x${device.deviceNetworkId} 1 6 0"
+    log.debug "refresh called"
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }
 
 def configure() {
-
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}"
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -22,6 +22,7 @@ metadata {
         capability "Actuator"
         capability "Color Temperature"
         capability "Configuration"
+        capability "Health Check"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -49,9 +50,6 @@ metadata {
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
                 attributeState "level", action:"switch level.setLevel"
             }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
         }
 
         standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
@@ -61,12 +59,12 @@ metadata {
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
+        valueTile("colorName", "device.colorName", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorName", label: '${currentValue}'
         }
 
         main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+        details(["switch", "colorTempSliderControl", "colorName", "refresh"])
     }
 }
 
@@ -75,7 +73,19 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        sendEvent(event)
+        // Temporary fix for the case when Device is OFFLINE and is connected again
+        if (state.lastActivity == null){
+            state.lastActivity = now()
+            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+        }
+        state.lastActivity = now()
+        if (event.name=="level" && event.value==0) {}
+        else {
+            if (event.name=="colorTemperature") {
+                setGenericName(event.value)
+            }
+            sendEvent(event)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"
@@ -95,12 +105,29 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+
+    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
+        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
+        state.lastActivity = null
+        return zigbee.onOffRefresh()
+    } else {
+        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
+        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
+    }
+}
+
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
+    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
+    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -0,0 +1,205 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
+	}
+
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+		status "09%": "command: 2003, payload: 09"
+		status "10%": "command: 2003, payload: 0A"
+		status "33%": "command: 2003, payload: 21"
+		status "66%": "command: 2003, payload: 42"
+		status "99%": "command: 2003, payload: 63"
+
+		// reply messages
+		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
+		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
+		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
+		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
+		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
+		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
+		}
+
+		main(["switch"])
+		details(["switch", "level", "refresh"])
+
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description != "updated") {
+		log.debug "parse() >> zwave.parse($description)"
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
+	dimmerEvents(cmd)
+}
+
+private dimmerEvents(physicalgraph.zwave.Command cmd) {
+	def value = (cmd.value ? "on" : "off")
+	def result = [createEvent(name: "switch", value: value)]
+	if (cmd.value && cmd.value <= 100) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
+	}
+	return result
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport $cmd"
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	createEvent([name: "indicatorStatus", value: value])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
+	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def on() {
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
+}
+
+def off() {
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
+}
+
+def setLevel(value) {
+	log.debug "setLevel >> value: $value"
+	def valueaux = value as Integer
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	if (level > 0) {
+		sendEvent(name: "switch", value: "on")
+	} else {
+		sendEvent(name: "switch", value: "off")
+	}
+	sendEvent(name: "level", value: level, unit: "%")
+	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+}
+
+def setLevel(value, duration) {
+	log.debug "setLevel >> value: $value, duration: $duration"
+	def valueaux = value as Integer
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
+	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
+	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
+				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
+}
+
+def poll() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def refresh() {
+	log.debug "refresh() is called"
+	def commands = []
+	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
+	if (getDataValue("MSR") == null) {
+		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	}
+	delayBetween(commands,100)
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -35,6 +35,7 @@ metadata {
 		// status messages
 		status "open":  "command: 2001, payload: FF"
 		status "closed": "command: 2001, payload: 00"
+		status "wake up": "command: 8407, payload: "
 	}
 
 	// UI tile definitions
@@ -174,7 +175,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
 	[event, response(cmds)]
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -0,0 +1,143 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Z-Wave Switch Generic", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+ 		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+	}
+
+	// tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+			}
+		}
+
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "switch"
+		details(["switch","refresh"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	[name: "indicatorStatus", value: value, display: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	updateDataValue("manufacturer", cmd.manufacturerName)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def on() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def off() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def poll() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+
+def refresh() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -15,12 +15,15 @@ metadata {
 	definition (name: "Z-Wave Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Indicator"
-		capability "Switch"
+ 		capability "Switch"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
-		fingerprint inClusters: "0x25"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}
 
 	// simulator metadata
@@ -33,6 +36,10 @@ metadata {
 		reply "200100,delay 100,2502": "command: 2503, payload: 00"
 	}
 
+	preferences {
+		input "ledIndicator", "enum", title: "LED Indicator", description: "Turn LED indicator... ", required: false, options:["on": "When On", "off": "When Off", "never": "Never"], defaultValue: "off"
+	}
+
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
@@ -52,10 +59,27 @@ metadata {
 		}
 
 		main "switch"
-		details(["switch","refresh","indicator"])
+		details(["switch","refresh"])
 	}
 }
 
+def updated(){
+  switch (ledIndicator) {
+        case "on":
+            indicatorWhenOn()
+            break
+        case "off":
+            indicatorWhenOff()
+            break
+        case "never":
+            indicatorNever()
+            break
+        default:
+            indicatorWhenOn()
+            break
+    }
+}
+
 def parse(String description) {
 	def result = null
 	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
@@ -139,19 +163,19 @@ def refresh() {
 	])
 }
 
-def indicatorWhenOn() {
+void indicatorWhenOn() {
 	sendEvent(name: "indicatorStatus", value: "when on", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorWhenOff() {
+void indicatorWhenOff() {
 	sendEvent(name: "indicatorStatus", value: "when off", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
-def indicatorNever() {
+void indicatorNever() {
 	sendEvent(name: "indicatorStatus", value: "never", display: false)
-	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 
 def invertSwitch(invert=true) {

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -24,17 +24,24 @@ definition(
     iconX3Url: "http://www.gidjit.com/appicon@3x.png",
     oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
 
+preferences(oauthPage: "deviceAuthorization") {
+    // deviceAuthorization page is simply the devices to authorize
+    page(name: "deviceAuthorization", title: "Device Authorization", nextPage: "instructionPage",
+         install: false, uninstall: true) {
+  		section ("Allow Gidjit to have access, thereby allowing you to quickly control and monitor your following devices. Privacy Policy can be found at http://priv.gidjit.com/privacy.html") {
+    		input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    		input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    		input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+        }
 
-
-preferences {
-  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
-    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
-
-  }
+    }
+    page(name: "instructionPage", title: "Device Discovery", install: true) {
+        section() {
+            paragraph "Now the process is complete return to the Devices section of the Detected Screen. From there and you can add actions to each of your device panels, including launching SmartThings routines."
+        }
+    }
 }
+
 mappings {
   path("/structureinfo") {
     action: [

smartapps/docwisdom/humidity-alert.src/humidity-alert.groovy

@@ -78,7 +78,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Rose Above ${tooHumid}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.on()
 		}
@@ -91,7 +91,7 @@ def humidityHandler(evt) {
 			log.debug "Notification already sent within the last ${deltaMinutes} minutes"
 			
 		} else {
-			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS to $phone1 and activating ${mySwitch}"
+			log.debug "Humidity Fell Below ${notHumidEnough}:  sending SMS and activating ${mySwitch}"
 			send("${humiditySensor1.label} sensed high humidity level of ${evt.value}")
 			switch1?.off()
 		}

smartapps/dooglave/let-there-be-dark.src/let-there-be-dark.groovy

@@ -25,15 +25,11 @@ preferences {
 
 def installed() {
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def updated() {
 	unsubscribe()
 	subscribe(contact1, "contact", contactHandler)
-	subscribe(switch1, "switch.on", switchOnHandler)
-    subscribe(switch1, "switch.off", switchOffHandler)
 }
 
 def contactHandler(evt) {
@@ -46,4 +42,4 @@ def contactHandler(evt) {
 if (evt.value == "closed") {
 	if(state.wasOn)switch1.on()
 }
-}
+}

smartapps/living-room/fan.src/fan.groovy

@@ -1,50 +0,0 @@
-/**
- *  Fan
- *
- *  Copyright 2016 Mike
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Fan",
-    namespace: "Living Room",
-    author: "Mike",
-    description: "Turn Fan on/off",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
-
-
-preferences {
-	section("Title") {
-		// TODO: put inputs here
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-}
-
-// TODO: implement event handlers

smartapps/mangioneimagery/medicine-management-contact-sensor.src/medicine-management-contact-sensor.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Medicine Management - Contact Sensor
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- Send notification at the medicine reminder time IF draw wasn't alread opened in past 60 minutes
+ * --- If draw still isn't open 10 minutes AFTER reminder time, LED will turn RED.
+ * --- ----- Once draw IS open, LED will return back to it's original color
+ *
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Contact Sensor",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This supports devices with capabilities of ContactSensor and ColorControl (LED). It sends an in-app and ambient light notification if you forget to open the drawer or cabinet where meds are stored. A reminder will be set to a single time per day. If the draw or cabinet isn't opened within 60 minutes of that reminder, an in-app message will be sent. If the draw or cabinet still isn't opened after an additional 10 minutes, then an LED light turns red until the draw or cabinet is opened",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+
+	section("My Medicine Draw/Cabinet"){
+		input "deviceContactSensor", "capability.contactSensor", title: "Opened Sensor" 
+	} 
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceContactSensor, "contact", contactHandler)
+
+    // how many minutes to look in the past from the reminder time, for an open draw
+    state.minutesToCheckOpenDraw = 60
+    
+    // is true when LED notification is set after exceeding 10 minutes past reminder time
+    state.ledNotificationTriggered = false
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkOpenDrawInPast)
+   
+}
+
+// Should turn off any LED notification on OPEN state
+def contactHandler(evt){
+	if (evt.value == "open") {
+        // if LED notification triggered, reset it.
+        log.debug "Cabinet opened"
+        if (state.ledNotificationTriggered) {
+            resetLEDNotification()
+        }
+	}
+}
+
+// If the draw was NOT opened within 60 minutes of the timer send notification out.
+def checkOpenDrawInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def cabinetOpened = isOpened(state.minutesToCheckOpenDraw)
+	log.debug "Cabinet found opened: $cabinetOpened"
+    
+    // if it's opened, then do nothing and assume they took their meds
+    if (!cabinetOpened) {    
+    	sendNotification("Hi, please remember to take your meds in the cabinet")
+       
+       // if no open activity, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkOpenDrawAfterReminder)
+    }
+}
+
+// If the draw was NOT opened after 10 minutes past reminder, use LED notification
+def checkOpenDrawAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def cabinetOpened = isOpened(10)    
+    
+   	log.debug "Cabinet found opened: $cabinetOpened"
+        
+    // if no open activity, blink lights
+    if (!cabinetOpened) {
+    	log.debug "Set LED to Notification color"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the sensor has been opened since the minutes entered
+// Return true if opened found, else false.
+def isOpened(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceContactSensor.eventsSince(previousDateTime)   
+    def cabinetOpened = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "open") {
+                cabinetOpened = true 
+            }
+        }
+	}
+    
+    return cabinetOpened
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	state.ledNotificationTriggered = true
+    
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+	state.ledNotificationTriggered = false
+    
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    if (state.origColor != null) {
+    	deviceLight.setHue(state.origColor)
+    }
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+
+}

smartapps/mangioneimagery/medicine-management-temp-motion.src/medicine-management-temp-motion.groovy

@@ -0,0 +1,189 @@
+/**
+ *  Medicine Management - Temp-Motion
+ *
+ *  Copyright 2016 Jim Mangione
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ * 
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * Logic: 
+ * --- If temp > threshold set, send notification
+ * --- Send in-app notification at the medicine reminder time if no motion is detected in past 60 minutes
+ * --- If motion still isn't detected 10 minutes AFTER reminder time, LED will turn RED
+ * --- ----- Once motion is detected, LED will turn back to it's original color
+ */
+import groovy.time.TimeCategory 
+
+definition(
+    name: "Medicine Management - Temp-Motion",
+    namespace: "MangioneImagery",
+    author: "Jim Mangione",
+    description: "This only supports devices with capabilities TemperatureMeasurement, AccelerationSensor and ColorControl (LED). Supports two use cases. First, will notifies via in-app if the fridge where meds are stored exceeds a temperature threshold set in degrees. Secondly, sends an in-app and ambient light notification if you forget to take your meds by sensing movement of the medicine box in the fridge. A reminder will be set to a single time per day. If the box isn't moved within 60 minutes of that reminder, an in-app message will be sent. If the box still isn't moved after an additional 10 minutes, then an LED light turns red until the box is moved",
+    category: "Health & Wellness",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+ 
+     section("My Medicine in the Refrigerator"){
+		input "deviceAccelerationSensor", "capability.accelerationSensor", required: true, multiple: false, title: "Movement"
+        input "deviceTemperatureMeasurement", "capability.temperatureMeasurement", required: true, multiple: false, title: "Temperature"
+	} 
+
+	section("Temperature Threshold"){
+    	input "tempThreshold", "number", title: "Temperature Threshold"
+    }
+
+    section("Remind me to take my medicine at"){
+        input "reminderTime", "time", title: "Time"
+    }
+    
+    // NOTE: Use REAL device - virtual device causes compilation errors
+    section("My LED Light"){
+    	input "deviceLight", "capability.colorControl", title: "Smart light"
+    }    
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+        
+	initialize()
+}
+
+def initialize() {
+	// will notify when temp exceeds max
+    subscribe(deviceTemperatureMeasurement, "temperature", tempHandler)
+
+    // will stop LED notification incase it was set by med reminder
+    subscribe(deviceAccelerationSensor, "acceleration.active", motionHandler)
+    
+    // how many minutes to look in the past from the reminder time
+    state.minutesToCheckPriorToReminder = 60
+    
+    // Set a timer to run once a day to notify if draw wasn't opened yet
+    schedule(reminderTime, checkMotionInPast)
+}
+
+
+// If temp > 39 then send an app notification out.
+def tempHandler(evt){
+	if (evt.doubleValue > tempThreshold) {
+    	log.debug "Fridge temp of $evt.value exceeded threshold"
+   		sendNotification("WARNING: Fridge temp is $evt.value with threshold of $tempThreshold")
+	}
+}
+
+// Should turn off any LED notification once motion detected
+def motionHandler(evt){
+    // always call out to stop any possible LED notification
+	log.debug "Medication moved. Send stop LED notification"
+    resetLEDNotification()
+}
+
+// If no motion detected within 60 minutes of the timer send notification out.
+def checkMotionInPast(){
+	log.debug "Checking past 60 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 60 minutes for any OPENED status
+    def movement = isMoved(state.minutesToCheckPriorToReminder)
+	log.debug "Motion found: $movement"
+    
+    // if there was movement, then do nothing and assume they took their meds
+    if (!movement) {    
+    	sendNotification("Hi, please remember to take your meds in the fridge")
+    
+        // if no movement, send out notification and set new reminder    
+        def reminderTimePlus10 = new Date(now() + (10 * 60000))
+
+        // needs to be scheduled if draw wasn't already opened
+        runOnce(reminderTimePlus10, checkMotionAfterReminder)
+    }
+}
+
+// If still no movement after 10 minutes past reminder, use LED notification
+def checkMotionAfterReminder(){
+	log.debug "Checking additional 10 minutes of activity from $reminderTime"
+    
+    // check activity of sensor for past 10 minutes for any OPENED status
+    def movement = isMoved(10)    
+    
+   	log.debug "Motion found: $movement"
+        
+    // if no open activity, blink lights
+    if (!movement) {
+    	log.debug "Notify LED API"
+        setLEDNotification()
+    }
+    
+}
+
+// Helper function for sending out an app notification
+def sendNotification(msg){
+        log.debug "Message Sent: $msg"
+        sendPush(msg)
+}
+
+// Check if the accelerometer has been activated since the minutes entered
+// Return true if active, else false.
+def isMoved(minutes){
+    // query last X minutes of activity log    
+    def previousDateTime = new Date(now() - (minutes * 60000))
+    
+    // capture all events recorded
+    def evts = deviceAccelerationSensor.eventsSince(previousDateTime)   
+    def motion = false
+    if (evts.size() > 0) {
+        evts.each{
+            if(it.value == "active") {
+                motion = true 
+            }
+        }
+	}
+    
+    return motion
+}
+
+// Saves current color and sets the light to RED
+def setLEDNotification(){
+
+	// turn light back off when reset is called if it was originally off
+ 	state.ledState = deviceLight.currentValue("switch")
+
+	// set light to RED and store original color until stopped    
+    state.origColor = deviceLight.currentValue("hue")
+    deviceLight.on()
+    deviceLight.setHue(100)
+    
+    log.debug "LED set to RED. Original color stored: $state.origColor"
+
+}
+
+// Sets the color back to the original saved color
+def resetLEDNotification(){
+
+    // return color to original
+    log.debug "Reset LED color to: $state.origColor"
+    deviceLight.setHue(state.origColor)
+    
+    // if the light was turned on just for the notification, turn it back off now
+    if (state.ledState == "off") {
+    	deviceLight.off()
+    }
+}

smartapps/sheikhsphere/smart-humidifier.src/smart-humidifier.groovy

@@ -77,7 +77,7 @@ def humidityHandler(evt) {
 
 		} else {
          	if (state.lastStatus != "off") {
-                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS to $phone1 and deactivating $mySwitch"
+                log.debug "Humidity Rose Above $humidityHigh1:  sending SMS and deactivating $mySwitch"
                 send("${humiditySensor1.label} sensed high humidity level of ${evt.value}, turning off ${switch1.label}")
                 switch1?.off()
                 state.lastStatus = "off"
@@ -99,7 +99,7 @@ def humidityHandler(evt) {
 
 		} else {
         	if (state.lastStatus != "on") {
-                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS to $phone1 and activating $mySwitch"
+                log.debug "Humidity Dropped Below $humidityLow1:  sending SMS and activating $mySwitch"
                 send("${humiditySensor1.label} sensed low humidity level of ${evt.value}, turning on ${switch1.label}")
                 switch1?.on()
                 state.lastStatus = "on"
@@ -125,4 +125,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -237,7 +237,7 @@ def completionPage() {
 		}
 
 		section("Notifications") {
-			input("recipients", "contact", title: "Send notifications to") {
+			input("recipients", "contact", title: "Send notifications to", required: false) {
 				input(name: "completionPhoneNumber", type: "phone", title: "Text This Number", description: "Phone number", required: false)
 				input(name: "completionPush", type: "bool", title: "Send A Push Notification", description: "Phone number", required: false)
 			}

smartapps/smartthings/has-barkley-been-fed.src/has-barkley-been-fed.groovy

@@ -68,7 +68,7 @@ def scheduleCheck()
             sendNotificationToContacts("No one has fed the dog", recipients)
         }
         else {
-            log.debug "Feeder was not opened since $midnight, texting $phone1"
+            log.debug "Feeder was not opened since $midnight, texting one phone number"
             sendSms(phone1, "No one has fed the dog")
         }
 	}

smartapps/smartthings/its-too-cold.src/its-too-cold.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue <= tooCold } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature dropped below $tooCold:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature dropped below $tooCold:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too cold, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()