Merge pull request #1088 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/smartthings/aeon-home-energy-meter.src/aeon-home-energy-meter.groovy

@@ -1,118 +1,118 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Aeon Home Energy Meter
- *
- *  Author: SmartThings
- *
- *  Date: 2013-05-30
- */
-metadata {
-	definition (name: "Aeon Home Energy Meter", namespace: "smartthings", author: "SmartThings") {
-		capability "Energy Meter"
-		capability "Power Meter"
-		capability "Configuration"
-		capability "Sensor"
-
-		command "reset"
-
-		fingerprint deviceId: "0x2101", inClusters: " 0x70,0x31,0x72,0x86,0x32,0x80,0x85,0x60"
-	}
-
-	// simulator metadata
-	simulator {
-		for (int i = 0; i <= 10000; i += 1000) {
-			status "power  ${i} W": new physicalgraph.zwave.Zwave().meterV1.meterReport(
-				scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
-		}
-		for (int i = 0; i <= 100; i += 10) {
-			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV1.meterReport(
-				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
-		}
-	}
-
-	// tile definitions
-	tiles {
-		valueTile("power", "device.power", decoration: "flat") {
-			state "default", label:'${currentValue} W'
-		}
-		valueTile("energy", "device.energy", decoration: "flat") {
-			state "default", label:'${currentValue} kWh'
-		}
-		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'reset kWh', action:"reset"
-		}
-		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
-
-		main (["power","energy"])
-		details(["power","energy", "reset","refresh", "configure"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	def cmd = zwave.parse(description, [0x31: 1, 0x32: 1, 0x60: 3])
-	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
-	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
-	if (cmd.scale == 0) {
-		[name: "energy", value: cmd.scaledMeterValue, unit: "kWh"]
-	} else if (cmd.scale == 1) {
-		[name: "energy", value: cmd.scaledMeterValue, unit: "kVAh"]
-	}
-	else {
-		[name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W"]
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-def refresh() {
-	delayBetween([
-		zwave.meterV2.meterGet(scale: 0).format(),
-		zwave.meterV2.meterGet(scale: 2).format()
-	])
-}
-
-def reset() {
-	// No V1 available
-	return [
-		zwave.meterV2.meterReset().format(),
-		zwave.meterV2.meterGet(scale: 0).format()
-	]
-}
-
-def configure() {
-	def cmd = delayBetween([
-		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // combined power in watts
-		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
-		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // combined energy in kWh
-		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
-		zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
-		zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 300).format() // every 5 min
-	])
-	log.debug cmd
-	cmd
-}
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Aeon Home Energy Meter
+ *
+ *  Author: SmartThings
+ *
+ *  Date: 2013-05-30
+ */
+metadata {
+	definition (name: "Aeon Home Energy Meter", namespace: "smartthings", author: "SmartThings") {
+		capability "Energy Meter"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Sensor"
+
+		command "reset"
+
+		fingerprint deviceId: "0x2101", inClusters: " 0x70,0x31,0x72,0x86,0x32,0x80,0x85,0x60"
+	}
+
+	// simulator metadata
+	simulator {
+		for (int i = 0; i <= 10000; i += 1000) {
+			status "power  ${i} W": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 10) {
+			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
+		}
+	}
+
+	// tile definitions
+	tiles {
+		valueTile("power", "device.power", decoration: "flat") {
+			state "default", label:'${currentValue} W'
+		}
+		valueTile("energy", "device.energy", decoration: "flat") {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main (["power","energy"])
+		details(["power","energy", "reset","refresh", "configure"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	def cmd = zwave.parse(description, [0x31: 1, 0x32: 1, 0x60: 3])
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
+	if (cmd.scale == 0) {
+		[name: "energy", value: cmd.scaledMeterValue, unit: "kWh"]
+	} else if (cmd.scale == 1) {
+		[name: "energy", value: cmd.scaledMeterValue, unit: "kVAh"]
+	}
+	else {
+		[name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W"]
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+def refresh() {
+	delayBetween([
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def reset() {
+	// No V1 available
+	return [
+		zwave.meterV2.meterReset().format(),
+		zwave.meterV2.meterGet(scale: 0).format()
+	]
+}
+
+def configure() {
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // combined power in watts
+		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // combined energy in kWh
+		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+		zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
+		zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 300).format() // every 5 min
+	])
+	log.debug cmd
+	cmd
+}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -29,6 +29,7 @@ metadata {
 		attribute "powerSupply", "enum", ["USB Cable", "Battery"]
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
+		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
 	}
 
 	simulator {
@@ -328,7 +329,7 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 
 def configure() {
 	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
+	sendEvent(name: "checkInterval", value: 2* (timeOptionValueMap[reportInterval] ?: (2*8*60)), displayed: false)
 
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
@@ -356,7 +357,7 @@ def configure() {
 									motionSensitivity == "minimum" ? 0 : 64)
 
 	//5. report every x minutes (threshold reports don't work on battery power, default 8 mins)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: 8*60) //association group 1
+	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: timeOptionValueMap[reportInterval] ?: (8*60)) //association group 1
 
 	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 6*60*60)  //association group 2