DEVTOOLS-162: This is a capability / simulator device type for Beacon.

[CHF-204] Implementation of PING in SmartPower Outlet

devicetypes/capabilities/beacon-capability.src/beacon-capability.groovy

@@ -0,0 +1,37 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Beacon Capability", namespace: "capabilities", author: "SmartThings") {
+		capability "Beacon"
+	}
+
+	simulator {
+		status "present": "beacon: present"
+		status "not present": "beacon: not present"
+	}
+
+	tiles {
+		standardTile("beacon", "device.beacon", width: 2, height: 2) {
+			state("not present", label:'not present', icon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
+			state("present", label:'present', icon:"st.presence.tile.present", backgroundColor:"#53a7c0")
+		}
+		main "beacon"
+		details "beacon"
+	}
+}
+
+def parse(String description) {
+	def pair = description.split(":")
+	createEvent(name: pair[0].trim(), value: pair[1].trim())
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,8 +64,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -747,8 +749,16 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    return boseRefreshNowPlaying()
+    // Fix to get faster update of power status back from speaker after sending on/off
+    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    // Note: This is a temporary hack that should be replaced by a re-design of the
+    // DTH to use sendHubCommand for all commands
+    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
+    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
+    sendHubCommand(boseGET("/now_playing"))
+    if (enable) {
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+    }
 }
 
 /**
@@ -787,10 +797,11 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    log.warn "boseConfirmPowerOn() attempt #" + tries
-    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
     }
     return result
 }

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -143,51 +144,14 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0030': // Closed/No Motion/Dry
-            log.debug 'no motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
 
-        case '0x0032': // Open/Motion/Wet
-            log.debug 'motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
+	result.name = 'motion'
+	result.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
-        case '0x0032': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0033': // Battery Alarm
-            break
-
-        case '0x0034': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
-
-        case '0x0035': // Restore Report
-            break
-
-        case '0x0036': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0038': // Test Mode
-            break
-    }
-    return resultMap
+	return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,7 +13,10 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
     	capability "Battery"
@@ -219,40 +222,33 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	List parsedMsg = description.split(" ")
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	log.debug "parseIasMessage: $description"
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	// Relevant bit field definitions from ZigBee spec
-	def BATTERY_BIT = ( 1 << 3 )
-	def TROUBLE_BIT = ( 1 << 6 )
-	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
-
-	// Convert hex string to integer
-	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
-
-	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
+	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zoneStatus & TROUBLE_BIT) {
+	 if (zs.isTroubleSet()) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zoneStatus & BATTERY_BIT) {
+		 if (zs.isBatterySet()) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -270,9 +266,6 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
-	resultMap_sensor.name = "contact"
-	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
-
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,6 +101,12 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			// Temporary fix for the case when Device is OFFLINE and is connected again
+			if (state.lastOnOff == null){
+				state.lastOnOff = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+			}
+			state.lastOnOff = now()
 		}
 	}
 	else {
@@ -116,9 +122,24 @@ def off() {
 def on() {
 	zigbee.on()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Outlet
+ * */
+def ping() {
+
+	// send read attribute onOFF if the last time we heard from the outlet is outside of the checkInterval
+	if (state.lastOnOff < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastOnOff=${new Date(state.lastOnOff)}"
+		state.lastOnOff = null
+		return zigbee.onOffRefresh()
+	} else { // if the last onOff activity is within the checkInterval we artificially create a Device-Watch event
+		log.info "ping, alive=yes, lastOnOff=${new Date(state.lastOnOff)}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+	}
+}
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
 }
 
 def configure() {

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
+		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -169,42 +172,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0022': // Tamper Alarm
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
+		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -182,44 +185,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0025': // Restore Report
-			break
-
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,6 +15,7 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -168,44 +169,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0025': // Restore Report
-            break
-
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -13,6 +13,7 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -224,47 +225,13 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
 
-		case '0x0021': // Open/Motion/Wet
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0022': // Tamper Alarm
-		break
-
-		case '0x0023': // Battery Alarm
-		break
-
-		case '0x0024': // Supervision Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
-
-		case '0x0025': // Restore Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0026': // Trouble/Failure
-		break
-
-		case '0x0028': // Test Mode
-		break
+	if(garageSensor !=  "Yes") {
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 	}
+
 	return resultMap
 }
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,6 +14,7 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,6 +25,7 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -171,40 +173,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0022': // Tamper Alarm
-        break
-
-        case '0x0023': // Battery Alarm
-        break
-
-        case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0026': // Trouble/Failure
-        break
-
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -167,40 +168,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,6 +16,8 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,6 +1,8 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
+		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,6 +15,8 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
+		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
+		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,6 +16,8 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,6 +16,7 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
+		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,6 +16,8 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
+		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -161,40 +162,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -11,100 +11,133 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-/*
- * Capabilities
- * - Battery
- * - Configuration
- * - Refresh
- * - Switch
- * - Valve
-*/
 
 metadata {
-	definition (name: "Zigbee Valve", namespace: "smartthings", author: "SmartThings") {
-		capability "Battery"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Switch"
-		capability "Valve"
+    definition (name: "ZigBee Valve", namespace: "smartthings", author: "SmartThings") {
+        capability "Actuator"
+        capability "Battery"
+        capability "Configuration"
+        capability "Power Source"
+        capability "Refresh"
+        capability "Valve"
 
-		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0020,0006,0B02", outClusters: "0003"
-	}
+        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0006, 0020, 0B02, FC02", outClusters: "0019", manufacturer: "WAXMAN", model: "leakSMART Water Valve v2.10", deviceJoinName: "leakSMART Valve"
+        fingerprint profileId: "0104", inClusters: "0000, 0001, 0003, 0004, 0005, 0006, 0008, 000F, 0020, 0B02", outClusters: "0003, 0019", manufacturer: "WAXMAN", model: "House Water Valve - MDL-TBD", deviceJoinName: "Waxman House Water Valve"
+    }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
 
-	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "off", label: 'closed', action: "switch.on", icon: "st.Outdoor.outdoor16", backgroundColor: "#e86d13"
-			state "on", label: 'open', action: "switch.off", icon: "st.Outdoor.outdoor16", backgroundColor: "#53a7c0"
-		}
-		main "switch"
-		details(["switch"])
-	}
+    tiles(scale: 2) {
+        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+                attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+                attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+                attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
+                attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
+            }
+            tileAttribute ("powerSource", key: "SECONDARY_CONTROL") {
+                attributeState "powerSource", label:'Power Source: ${currentValue}'
+            }
+        }
+
+        valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+            state "battery", label:'${currentValue}% battery', unit:""
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["valve"])
+        details(["valve", "battery", "refresh"])
+    }
 }
 
+private getCLUSTER_BASIC() { 0x0000 }
+private getBASIC_ATTR_POWER_SOURCE() { 0x0007 }
+private getCLUSTER_POWER() { 0x0001 }
+private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
+private getTYPE_U8() { 0x20 }
+private getTYPE_ENUM8() { 0x30 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.info description
-	if (description?.startsWith("catchall:")) {
-        def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-        def msg = zigbee.parse(description)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-		log.trace msg
-		log.trace "data: $msg.data"
-	}
-	else {
-		def name = description?.startsWith("on/off: ") ? "switch" : null
-		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
-		def result = createEvent(name: name, value: value)
-		log.debug "Parse returned ${result?.descriptionText}"
-		return result
-	}
-}
-
-// Commands to device
-def on() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
-}
-
-def off() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        if(event.name == "switch") {
+            event.name = "contact"                  //0006 cluster in valve is tied to contact
+            if(event.value == "on") {
+                event.value = "open"
+            }
+            else if(event.value == "off") {
+                event.value = "closed"
+            }
+        }
+        sendEvent(event)
+    }
+    else {
+        def descMap = zigbee.parseDescriptionAsMap(description)
+        if (descMap.clusterInt == CLUSTER_BASIC && descMap.attrInt == BASIC_ATTR_POWER_SOURCE){
+            def value = descMap.value
+            if (value == "01" || value == "02") {
+                sendEvent(name: "powerSource", value: "Mains")
+            }
+            else if (value == "03") {
+                sendEvent(name: "powerSource", value: "Battery")
+            }
+            else if (value == "04") {
+                sendEvent(name: "powerSource", value: "DC")
+            }
+            else {
+                sendEvent(name: "powerSource", value: "Unknown")
+            }
+        }
+        else if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
+            event.name = "battery"
+            event.value = Math.round(Integer.parseInt(descMap.value, 16) / 2)
+            sendEvent(event)
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug descMap
+        }
+    }
 }
 
 def open() {
-	log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+    zigbee.on()
 }
 
 def close() {
-	log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    zigbee.off()
 }
 
 def refresh() {
-	log.debug "sending refresh command"
-	"st rattr 0x${device.deviceNetworkId} 1 6 0"
+    log.debug "refresh called"
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) +
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1)
 }
 
 def configure() {
-
-	"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}"
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

smartapps/com-gidjit-smartthings-hub/gidjit-hub.src/gidjit-hub.groovy

@@ -24,17 +24,24 @@ definition(
     iconX3Url: "http://www.gidjit.com/appicon@3x.png",
     oauth: [displayName: "Gidjit", displayLink: "www.gidjit.com"])
 
+preferences(oauthPage: "deviceAuthorization") {
+    // deviceAuthorization page is simply the devices to authorize
+    page(name: "deviceAuthorization", title: "Device Authorization", nextPage: "instructionPage",
+         install: false, uninstall: true) {
+  		section ("Allow Gidjit to have access, thereby allowing you to quickly control and monitor your following devices. Privacy Policy can be found at http://priv.gidjit.com/privacy.html") {
+    		input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
+    		input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
+    		input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
+        }
 
-
-preferences {
-  section ("Allow Gidjit to have access, there by allowing you to quickly control and monitor the following devices") {
-    input "switches", "capability.switch", title: "Control/Monitor your switches", multiple: true, required: false
-    input "thermostats", "capability.thermostat", title: "Control/Monitor your thermostats", multiple: true, required: false
-    input "windowShades", "capability.windowShade", title: "Control/Monitor your window shades", multiple: true, required: false //windowShade
-    //input "bulbs", "capability.colorControl", title: "Control your lights", multiple: true, required: false //windowShade
-
-  }
+    }
+    page(name: "instructionPage", title: "Device Discovery", install: true) {
+        section() {
+            paragraph "Now the process is complete return to the Devices section of the Detected Screen. From there and you can add actions to each of your device panels, including launching SmartThings routines."
+        }
+    }
 }
+
 mappings {
   path("/structureinfo") {
     action: [