DEVTOOLS-162: This is a capability / simulator device type for Carbon Dioxide Measurement.

[CHF-204] Implementation of PING in SmartPower Outlet

devicetypes/capabilities/carbon-dioxide-measurement-capability.src/carbon-dioxide-measurement-capability.groovy

@@ -0,0 +1,39 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Carbon Dioxide Measurement Capability", namespace: "capabilities", author: "SmartThings") {
+		capability "Carbon Dioxide Measurement"
+	}
+
+	simulator {
+		for (i in [250,350,500,800,1000,2000,5000,10000,20000,40000]) {
+			status "${i} parts-per-million (ppm)": "carbonDioxide:${i}"
+		}
+	}
+
+	tiles {
+		valueTile("carbonDioxide", "device.carbonDioxide", width: 2, height: 2) {
+			state "carbonDioxide", label:'${currentValue} ${unit}', unit:"ppm"
+		}
+		main(["carbonDioxide"])
+		details(["carbonDioxide"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description)
+{
+	def pair = description.split(":")
+	createEvent(name: pair[0].trim(), value: pair[1].trim())
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -64,8 +64,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff"
-        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821"
+        state "on", label: '${name}', action: "switch.off", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
+        state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
+        state "off", label: '${name}', action: "switch.on", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -747,8 +749,16 @@ def cb_boseSetInput(xml, input) {
  */
 def boseSetPowerState(boolean enable) {
     log.info "boseSetPowerState(${enable})"
-    queueCallback('nowPlaying', "cb_boseSetPowerState", enable ? "POWERON" : "POWEROFF")
-    return boseRefreshNowPlaying()
+    // Fix to get faster update of power status back from speaker after sending on/off
+    // Instead of queuing the command to be sent after the refresh send it directly via sendHubCommand
+    // Note: This is a temporary hack that should be replaced by a re-design of the
+    // DTH to use sendHubCommand for all commands
+    sendHubCommand(bosePOST("/key", "<key state=\"press\" sender=\"Gabbo\">POWER</key>")) 
+    sendHubCommand(bosePOST("/key", "<key state=\"release\" sender=\"Gabbo\">POWER</key>"))
+    sendHubCommand(boseGET("/now_playing"))
+    if (enable) {
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", 5)
+    }
 }
 
 /**
@@ -787,10 +797,11 @@ def cb_boseSetPowerState(xml, state) {
  */
 def cb_boseConfirmPowerOn(xml, tries) {
     def result = []
-    log.warn "boseConfirmPowerOn() attempt #" + tries
-    if (xml.attributes()['source'] == "STANDBY" && tries > 0) {
+    def attempt = tries as Integer
+    log.warn "boseConfirmPowerOn() attempt #$attempt"
+    if (xml.attributes()['source'] == "STANDBY" && attempt > 0) {
         result << boseRefreshNowPlaying()
-        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", tries-1)
+        queueCallback('nowPlaying', "cb_boseConfirmPowerOn", attempt-1)
     }
     return result
 }

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -143,51 +144,14 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0030': // Closed/No Motion/Dry
-            log.debug 'no motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	Map resultMap = [:]
 
-        case '0x0032': // Open/Motion/Wet
-            log.debug 'motion'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
+	result.name = 'motion'
+	result.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
 
-        case '0x0032': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0033': // Battery Alarm
-            break
-
-        case '0x0034': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'inactive'
-            break
-
-        case '0x0035': // Restore Report
-            break
-
-        case '0x0036': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-            resultMap.name = 'motion'
-            resultMap.value = 'active'
-            break
-
-        case '0x0038': // Test Mode
-            break
-    }
-    return resultMap
+	return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,7 +13,10 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
     	capability "Battery"
@@ -219,40 +222,33 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	List parsedMsg = description.split(" ")
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	log.debug "parseIasMessage: $description"
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	// Relevant bit field definitions from ZigBee spec
-	def BATTERY_BIT = ( 1 << 3 )
-	def TROUBLE_BIT = ( 1 << 6 )
-	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
-
-	// Convert hex string to integer
-	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
-
-	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
+	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zoneStatus & TROUBLE_BIT) {
+	 if (zs.isTroubleSet()) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zoneStatus & BATTERY_BIT) {
+		 if (zs.isBatterySet()) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -270,9 +266,6 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
-	resultMap_sensor.name = "contact"
-	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
-
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,6 +101,12 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+			// Temporary fix for the case when Device is OFFLINE and is connected again
+			if (state.lastOnOff == null){
+				state.lastOnOff = now()
+				sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+			}
+			state.lastOnOff = now()
 		}
 	}
 	else {
@@ -116,9 +122,24 @@ def off() {
 def on() {
 	zigbee.on()
 }
+/**
+ * PING is used by Device-Watch in attempt to reach the Outlet
+ * */
+def ping() {
+
+	// send read attribute onOFF if the last time we heard from the outlet is outside of the checkInterval
+	if (state.lastOnOff < (now() - (1000 * device.currentValue("checkInterval"))) ){
+		log.info "ping, alive=no, lastOnOff=${new Date(state.lastOnOff)}"
+		state.lastOnOff = null
+		return zigbee.onOffRefresh()
+	} else { // if the last onOff activity is within the checkInterval we artificially create a Device-Watch event
+		log.info "ping, alive=yes, lastOnOff=${new Date(state.lastOnOff)}"
+		sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
+	}
+}
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
 }
 
 def configure() {

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
+		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -169,42 +172,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0022': // Tamper Alarm
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
-
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
-
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -13,6 +13,8 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -22,6 +24,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
+		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -182,44 +185,10 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0023': // Battery Alarm
-			break
-
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
-
-		case '0x0025': // Restore Report
-			break
-
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,6 +15,7 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -168,44 +169,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0022': // Tamper Alarm
-        	log.debug 'motion with tamper alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	log.debug 'no motion with tamper alarm'
-        	resultMap = getMotionResult('inactive')
-            break
-
-        case '0x0025': // Restore Report
-            break
-
-        case '0x0026': // Trouble/Failure
-        	log.debug 'motion with failure alarm'
-        	resultMap = getMotionResult('active')
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -13,6 +13,7 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -224,47 +225,13 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
 
-		case '0x0021': // Open/Motion/Wet
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0022': // Tamper Alarm
-		break
-
-		case '0x0023': // Battery Alarm
-		break
-
-		case '0x0024': // Supervision Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('closed')
-			}
-		break
-
-		case '0x0025': // Restore Report
-			if (garageSensor != "Yes"){
-				resultMap = getContactResult('open')
-			}
-		break
-
-		case '0x0026': // Trouble/Failure
-		break
-
-		case '0x0028': // Test Mode
-		break
+	if(garageSensor !=  "Yes") {
+		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 	}
+
 	return resultMap
 }
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,6 +14,7 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,6 +25,7 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -171,40 +173,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	Map resultMap = [:]
-	switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0021': // Open/Motion/Wet
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0022': // Tamper Alarm
-        break
-
-        case '0x0023': // Battery Alarm
-        break
-
-        case '0x0024': // Supervision Report
-        resultMap = getContactResult('closed')
-        break
-
-        case '0x0025': // Restore Report
-        resultMap = getContactResult('open')
-        break
-
-        case '0x0026': // Trouble/Failure
-        break
-
-        case '0x0028': // Test Mode
-        break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -167,40 +168,8 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
+		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,6 +16,8 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,6 +1,8 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
+		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,6 +15,8 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
+		capability "Sensor"
+		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
+		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
+		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,6 +16,8 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,6 +16,7 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
+		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,6 +16,8 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
+		capability "Sensor"
+		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,6 +15,7 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
+		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -161,40 +162,9 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-    }
-    return resultMap
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
 }
 
 def getTemperature(value) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -20,6 +20,7 @@ metadata {
         capability "Switch"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
     }
 
     // simulator metadata