Merge pull request #1241 from SmartThingsCommunity/staging

Rolling up staging to prod for deploy

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -67,12 +67,6 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -96,15 +90,7 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.levelRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.levelRefresh()
 }
 
 def refresh() {
@@ -117,6 +103,8 @@ def poll() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -16,6 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -55,6 +56,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -166,3 +171,7 @@ def verifyPercent(percent) {
         return false
     }
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -62,7 +62,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-        	log.trace "Parsing description"
+			log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -72,13 +72,13 @@ def parse(description) {
 						log.info "Bridge response: $msg.body"
 					} else {
 						// Sending Bulbs List to parent"
-                        if (parent.state.inBulbDiscovery)
-                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
+					parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -17,6 +17,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -64,6 +65,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -182,3 +187,7 @@ def verifyPercent(percent) {
         return false
     }
 }
+
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,6 +14,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+        capability "Health Check"
 
         command "refresh"
 	}
@@ -48,6 +49,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -87,3 +92,7 @@ void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -15,6 +15,7 @@ metadata {
         capability "Color Temperature"
         capability "Switch"
         capability "Refresh"
+        capability "Health Check"
 
         command "refresh"
     }
@@ -53,6 +54,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 15, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"
@@ -101,3 +106,7 @@ void refresh() {
     log.debug "Executing 'refresh'"
     parent.manualRefresh()
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -91,7 +91,7 @@ def parse(String description) {
 
         if (descMap.cluster == "0300") {
             if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -203,7 +203,7 @@ def setLevel(value) {
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,4 +1,4 @@
-/* 
+/*
     Osram Flex RGBW Light Strip
 
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
@@ -8,7 +8,7 @@
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-        
+
         capability "Color Temperature"
         capability "Actuator"
         capability "Switch"
@@ -18,7 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Color Control"
-                        
+
         attribute "colorName", "string"
 
         command "setAdjustedColor"
@@ -49,7 +49,7 @@ metadata {
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
 			state "colorTemperature", action:"color temperature.setColorTemperature"
 		}
@@ -118,7 +118,7 @@ def parse(String description) {
                 }
             }
             else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -274,7 +274,7 @@ private getGenericName(value){
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)
@@ -449,7 +449,7 @@ def setColor(value){
         def level = hex(value.level * 255 / 100)
         cmd << zigbeeSetLevel(level)
     }
-    
+
 	if (value.switch == "off") {
 		cmd << "delay 150"
 		cmd << off()

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,12 +101,6 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
-			// Temporary fix for the case when Device is OFFLINE and is connected again
-			if (state.lastActivity == null){
-				state.lastActivity = now()
-				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-			}
-			state.lastActivity = now()
 		}
 	}
 	else {
@@ -126,15 +120,7 @@ def on() {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.onOffRefresh()
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -142,8 +128,10 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
-	zigbee.onOffConfig() + powerConfig() + refresh()
+	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -101,13 +101,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -233,6 +226,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -283,15 +278,7 @@ private Map getMoistureResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -305,23 +292,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -105,13 +105,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -248,6 +241,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -294,15 +289,7 @@ private Map getMotionResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else { 
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -316,24 +303,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -170,7 +170,7 @@ private Map parseCustomMessage(String description) {
 
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
+	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
 
 def getTemperature(value) {
@@ -206,6 +206,8 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -127,13 +127,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -313,6 +306,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -376,15 +371,7 @@ private getAccelerationResult(numValue) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -414,13 +401,16 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	def configCmds = enrollResponse() +
 			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
+			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,6 +206,8 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -92,13 +92,6 @@ def parse(String description) {
     	map = parseIasMessage(description)
     }
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -207,6 +200,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -246,15 +241,7 @@ private Map getContactResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -268,23 +255,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -83,13 +83,6 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -214,6 +207,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -251,14 +246,7 @@ private Map getHumidityResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh()
@@ -276,23 +264,19 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+	sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
+	def humidityConfigCmds = [
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -54,12 +54,6 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             sendEvent(event)
@@ -86,15 +80,7 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -103,7 +89,8 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -85,12 +85,6 @@ def parse(String description) {
     def event = zigbee.getEvent(description)
     if (event) {
         log.debug event
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             if (event.name=="colorTemperature") {
@@ -105,12 +99,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-                sendEvent(name: "hue", value: hueValue, displayed:false)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
                 def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
         else {
@@ -130,15 +124,7 @@ def off() {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -147,9 +133,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -74,12 +74,6 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             if (event.name=="colorTemperature") {
@@ -110,15 +104,7 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -127,9 +113,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    // Device-Watch allows 3 check-in misses from device. 300 seconds x 3 = 15min
+    sendEvent(name: "checkInterval", value: 900, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on Monitor when vibration is sensed",
+    description: "Turn on switch when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When the keyboard is used...") {
+	section("When vibration is sensed...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on/off a light...") {
+section("Turn on switch...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,5 +47,3 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
-
-

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,10 +64,12 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
+    def dUnit = evt.unit ?: "Watts"
+
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -78,7 +80,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -761,7 +761,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padRight(2, "0")
+	def seconds = "${60 * fraction as int}".padLeft(2, "0")
 	return "${minutes}:${seconds}"
 }
 
@@ -1101,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -95,8 +95,7 @@ def bridgeDiscoveryFailed() {
 	}
 }
 
-def bridgeLinking()
-{
+def bridgeLinking() {
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
 	state.linkRefreshcount = linkRefreshcount + 1
 	def refreshInterval = 3
@@ -171,7 +170,7 @@ def bulbDiscovery() {
 
 	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, options:newLights
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
 			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
 		}
 		section {
@@ -328,7 +327,7 @@ def bulbListHandler(hub, data = "") {
         def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
             if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub]
+                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
         }
     }
     def bridge = null
@@ -448,7 +447,6 @@ def addBridge() {
 					updateBridgeStatus(childDevice)
 					childDevice.sendEvent(name: "idNumber", value: idNumber)
 
-
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
 							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
@@ -649,8 +647,7 @@ def locationHandler(evt) {
             	}
             }
 		}
-	}
-	else if (parsedEvent.headers && parsedEvent.body) {
+	} else if (parsedEvent.headers && parsedEvent.body) {
 		log.trace "HUE BRIDGE RESPONSES"
 		def headerString = parsedEvent.headers.toString()
 		if (headerString?.contains("xml")) {
@@ -727,13 +724,13 @@ private void updateBridgeStatus(childDevice) {
 }
 
 /**
- * Check if all Hue bridges have been heard from in the last 16 minutes, if not an Offline event will be sent
- * for the bridge. Also, set ID number on bridge if not done previously.
+ * Check if all Hue bridges have been heard from in the last 11 minutes, if not an Offline event will be sent
+ * for the bridge and all connected lights. Also, set ID number on bridge if not done previously.
  */
 private void checkBridgeStatus() {
     def bridges = getHueBridges()
-    // Check if each bridge has been heard from within the last 16 minutes (3 poll intervals times 5 minutes plus buffer)
-    def time = now() - (1000 * 60 * 16)
+    // Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
+    def time = now() - (1000 * 60 * 11)
     bridges.each {
         def d = getChildDevice(it.value.mac)
 	    if(d) {
@@ -743,14 +740,21 @@ private void checkBridgeStatus() {
 				d.sendEvent(name: "idNumber", value: it.value.idNumber)
 		    }
 
-	        if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-	            log.warn "Bridge $it.key is Offline"
-	            d.sendEvent(name: "status", value: "Offline")
-	        } else {
+			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
+				log.warn "Bridge $it.key is Offline"
+				d.sendEvent(name: "status", value: "Offline")
+
+				state.bulbs?.each {
+					it.value.online = false
+				}
+				getChildDevices().each {
+					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
+				}
+			} else {
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
-	        }
-	    }
-    }
+			}
+		}
+	}
 }
 
 def isValidSource(macAddress) {
@@ -758,6 +762,10 @@ def isValidSource(macAddress) {
 	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
 }
 
+def isInBulbDiscovery() {
+	return state.inBulbDiscovery
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -781,8 +789,7 @@ def parse(childDevice, description) {
             if (body instanceof java.util.Map) {
                 // get (poll) reponse
                 return handlePoll(body)
-            }
-            else {
+			} else {
 				//put response
 				return handleCommandResponse(body)
             }
@@ -879,36 +886,40 @@ private handleCommandResponse(body) {
 	// scan entire response before sending events to make sure they are always in the same order
 	def updates = [:]
 
-                body.each { payload ->
-                    log.debug $payload
+	body.each { payload ->
+		log.debug $payload
 
 		if (payload?.success) {
-                        def childDeviceNetworkId = app.id + "/"
-                        def eventType
+			def childDeviceNetworkId = app.id + "/"
+			def eventType
 			payload.success.each { k, v ->
 				def data = k.split("/")
 				if (data.length == 5) {
 					childDeviceNetworkId = app.id + "/" + k.split("/")[2]
 					if (!updates[childDeviceNetworkId])
 						updates[childDeviceNetworkId] = [:]
-                            eventType = k.split("/")[4]
+					eventType = k.split("/")[4]
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
 		} else if (payload.error) {
 			log.warn "Error returned from Hue bridge error = ${body?.error}"
-                            }
-                        }
+		}
+	}
 
 	// send events for each update found above (order of events should be same as handlePoll())
 	updates.each { childDeviceNetworkId, params ->
 		def device = getChildDevice(childDeviceNetworkId)
-		sendBasicEvents(device, "on", params.on)
-		sendBasicEvents(device, "bri", params.bri)
-		sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
-                    }
+		def id = getId(device)
+		// If device is offline, then don't send events which will update device watch
+		if (isOnline(id)) {
+			sendBasicEvents(device, "on", params.on)
+			sendBasicEvents(device, "bri", params.bri)
+			sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
+		}
+	}
 	return []
-                    }
+}
 
 /**
  * Handles a response to a poll (GET) sent to the Hue Bridge.
@@ -928,26 +939,33 @@ private handleCommandResponse(body) {
  * @return empty array
  */
 private handlePoll(body) {
-	if (state.updating) {
-		// If user just executed commands, then ignore poll to not confuse the turning on/off state
-		return []
-                }
-
 	def bulbs = getChildDevices()
 	for (bulb in body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
 		if (device) {
 			if (bulb.value.state?.reachable) {
-				sendBasicEvents(device, "on", bulb.value?.state?.on)
-				sendBasicEvents(device, "bri", bulb.value?.state?.bri)
-				sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+				if (state.bulbs[bulb.key]?.online == false) {
+					// light just came back online, notify device watch
+					def lastActivity = now()
+					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+				}
+				state.bulbs[bulb.key]?.online = true
+
+				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
+				if (!state.updating) {
+					sendBasicEvents(device, "on", bulb.value?.state?.on)
+					sendBasicEvents(device, "bri", bulb.value?.state?.bri)
+					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+				}
 			} else {
+				state.bulbs[bulb.key]?.online = false
 				log.warn "$device is not reachable by Hue bridge"
-                    }
-                }
-            }
-		return []
+				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+			}
+		}
 	}
+	return []
+}
 
 private updateInProgress() {
 	state.updating = true
@@ -976,22 +994,34 @@ def hubVerification(bodytext) {
 
 def on(childDevice) {
 	log.debug "Executing 'on'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [on: true])
+	put("lights/$id/state", [on: true])
     return "Bulb is turning On"
 }
 
 def off(childDevice) {
 	log.debug "Executing 'off'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
-	put("lights/${getId(childDevice)}/state", [on: false])
+	put("lights/$id/state", [on: false])
     return "Bulb is turning Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 1 - 254
     def level
@@ -1006,48 +1036,64 @@ def setLevel(childDevice, percent) {
 	// that means that the light will still be on when on is called next time
 	// Lets emulate that here
 	if (percent > 0) {
-		put("lights/${getId(childDevice)}/state", [bri: level, on: true])
+		put("lights/$id/state", [bri: level, on: true])
 	} else {
-		put("lights/${getId(childDevice)}/state", [on: false])
+		put("lights/$id/state", [on: false])
 	}
 	return "Setting level to $percent"
 }
 
 def setSaturation(childDevice, percent) {
 	log.debug "Executing 'setSaturation($percent)'"
-    updateInProgress()
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
+
+	updateInProgress()
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
 	// TODO should this be done by app only or should we default to on?
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [sat: level, on: true])
+	put("lights/$id/state", [sat: level, on: true])
 	return "Setting saturation to $percent"
 }
 
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [hue: level, on: true])
+	put("lights/$id/state", [hue: level, on: true])
 	return "Setting hue to $percent"
 }
 
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [ct: ct, on: true])
+	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $percent"
 }
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 
     def value = [:]
@@ -1104,15 +1150,23 @@ def setColor(childDevice, huesettings) {
         value.on = false
 
 	createSwitchEvent(childDevice, value.on ? "on" : "off")
-    put("lights/${getId(childDevice)}/state", value)
+    put("lights/$id/state", value)
 	return "Setting color to $value"
 }
 
+def ping(childDevice) {
+	if (isOnline(getId(childDevice))) {
+		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
+		return "Device is Online"
+	} else {
+		return "Device is Offline"
+	}
+}
+
 private getId(childDevice) {
 	if (childDevice.device?.deviceNetworkId?.startsWith("HUE")) {
 		return childDevice.device?.deviceNetworkId[3..-1]
-	}
-	else {
+	} else {
 		return childDevice.device?.deviceNetworkId.split("/")[-1]
 	}
 }
@@ -1123,10 +1177,13 @@ private poll() {
 	log.debug "GET: $host$uri"
 	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
-
 """, physicalgraph.device.Protocol.LAN, selectedHue))
 }
 
+private isOnline(id) {
+	return (state.bulbs[id].online != null && state.bulbs[id].online) || state.bulbs[id].online == null
+}
+
 private put(path, body) {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/$path"
@@ -1194,7 +1251,7 @@ def convertBulbListToMap() {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
 			state.bulbs.unique {it.id}.each { bulb ->
-				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub]]
+				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map
 		}

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -111,16 +111,23 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
-		if (pushAndPhone != 'No') {
-			log.debug 'sending push'
-			options.method = 'push'
-			sendNotification(msg, options)
-		}
 		if (phone) {
 			options.phone = phone
-			log.debug 'sending SMS'
-			sendNotification(msg, options)
+			if (pushAndPhone != 'No') {
+				log.debug 'Sending push and SMS'
+				options.method = 'both'
+			} else {
+				log.debug 'Sending SMS'
+				options.method = 'phone'
+			}
+		} else if (pushAndPhone != 'No') {
+			log.debug 'Sending push'
+			options.method = 'push'
+		} else {
+			log.debug 'Sending nothing'
+			options.method = 'none'
 		}
+		sendNotification(msg, options)
 	}
 	if (frequency) {
 		state[evt.deviceId] = now()