DEVC-489: Adding a fingerprint line to the DTH

Add explicit send commands for zigbee raw

build.gradle

@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "http://artifactory.smartthings.com/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -27,9 +27,37 @@ buildscript {
 repositories {
     mavenLocal()
     jcenter()
+    maven {
+        credentials {
+            username smartThingsArtifactoryUserName
+            password smartThingsArtifactoryPassword
+        }
+        url "https://artifactory.smartthings.com/libs-release-local"
+    }
+}
+
+sourceSets {
+    devicetypes {
+        groovy {
+            srcDirs = ['devicetypes']
+        }
+    }
+    smartapps {
+        groovy {
+            srcDirs = ['smartapps']
+        }
+    }
 }
 
 dependencies {
+    devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
+    smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
+    smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
+    smartappsCompile 'org.grails:grails-web:2.3.11'
+    smartappsCompile 'org.json:json:20140107'
 }
 
 slackSendMessage {

circle.yml

@@ -5,7 +5,9 @@ machine:
 
 dependencies:
   override:
-    - echo "Nothing to do."
+    - ./gradlew dependencies -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
+  post:
+    - ./gradlew compileSmartappsGroovy compileDevicetypesGroovy -PsmartThingsArtifactoryUserName="$ARTIFACTORY_USERNAME" -PsmartThingsArtifactoryPassword="$ARTIFACTORY_PASSWORD"
 
 test:
   override:

devicetypes/cr76/rooflight-controller.src/rooflight-controller.groovy

@@ -1,183 +0,0 @@
-metadata {
-	definition (name: "Rooflight Controller", namespace: "CR76", author: "Cameron.Reid@Glazingvision.co.uk") {
-        capability "Refresh"
-        capability "Polling"
-        capability "Switch"
-        capability "Switch level"
-
-        attribute "Rooflight", "string"
-        attribute "Weather", "string"
-        attribute "Thermostat", "string"
-        
-        command "Stop"
-        
-    	fingerprint profileId: "0104", inClusters: "0000,0006,0008"    
-	}
-
-	// simulator metadata
-	simulator {
-    }
-
-	// UI tile definitions
-	tiles {
-		multiAttributeTile(name:"sliderTile", type: "generic", width:6, height:4) {
-    		tileAttribute("device.Rooflight", key: "PRIMARY_CONTROL") {
-        		attributeState "Open", label:'Open', action: "Switch.off", backgroundColor:"#79b821", nextState:"Closing"
-        		attributeState "Closed", label:'Closed', action: "Switch.on", backgroundColor:"#ffffff", nextState:"Opening"
-        		attributeState "Opening", label:'Opening', backgroundColor:"#79b821"
-        		attributeState "Closing", label:'Closing', backgroundColor:"#ffffff"
-    		}
-        	tileAttribute ("device.Rooflight", key: "SECONDARY_CONTROL") {
-				attributeState "Open", label: 'Push to close.', nextState:"Closing"
-            	attributeState "Closed", label: 'Push to open.', nextState:"Opening"
-            	attributeState "Opening", label: 'Skylight opening.'
-            	attributeState "Closing", label: 'Skylight closing.'
-            }
-        }
-        standardTile("Close", "device.Rooflight", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
-			state "default", label: 'Close', action:"Switch.off", icon:"st.thermostat.thermostat-left"
-		}
-        standardTile("Stop", "device.level", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
-			state "default", action:"Stop", icon:"st.sonos.stop-btn"
-		}
-        standardTile("Open", "device.Rooflight", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
-			state "default", label: 'open', action:"Switch.on", icon:"st.thermostat.thermostat-right"
-		}
-        standardTile("Rain", "device.Weather", width: 2, height: 2) {
-        	state "No", backgroundColor: "#ffffff"
-    		state "Dry", label: 'Dry', icon:"st.Weather.weather14", backgroundColor: "#ffffff"
-    		state "Raining", label: 'Raining', icon:"st.Weather.weather10", backgroundColor: "#153591"
-		}
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width:2, height:2 ) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-        
-		main ("sliderTile")
-		details (["sliderTile","Close","Stop","Open","Rain","refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "Parse description $description"
-    def name = null
-    def value = null
- 	
-    if (description?.startsWith("catchall: 0104 0006 38")) {
-        log.debug "On/Off command received from EP 38 open / close command"
-        if (description?.endsWith("01 01 0000001000")) {
-        	name = "Rooflight"
-        	value = "Closed"
-        }
-        else if (description?.endsWith("01 01 0000001001")) {
-        	name = "Rooflight"
-            value = "Open"
-        }
-       else if (description?.endsWith("01 01 0000001003")) {
-        	name = "Rooflight"
-            value = "Opening"
-       } 
-       else if (description?.endsWith("01 01 0000001004")) {
-        	name = "Rooflight"
-            value = "Closing"
-       } 
-    }
-    if (description?.startsWith("catchall: 0104 0006 39")) {
-        log.debug "On/Off command received from EP 39 is rain sensor connected"
-        if (description?.endsWith("01 01 0000001000")) {
-        	name = "Weather"
-            value = "No"
-            state.tile = 1
-        }
-        else if (description?.endsWith("01 01 0000001001")) {
-        	name = "Weather"
-            value = "Dry"
-            state.tile = 0
-            log.debug "${state.tile}"
-        }
-    }
-    if (description?.startsWith("catchall: 0104 0006 40"))  {
-        log.debug "On/Off command received from EP 40 Thermostat"
-        if (description?.endsWith("01 01 0000001000")){
-        	name = "Switch"
-            value = "on"
-        }
-        else if (description?.endsWith("01 01 0000001001")) {
-        	name = "Switch"
-            value = "off"
-        }
-    }
-    if (description?.startsWith("catchall: 0104 0006 41")) {
-        log.debug "On/Off command received from EP 41 rain sensor"
-       	if (description?.endsWith("01 01 0000001000")) {
-        	name = "Weather"
-        	value = "Dry"
-        }
-        else if (description?.endsWith("01 01 0000001001")) {
-        	name = "Weather"
-        	value = "Raining"
-        }
-    }
-    if(description?.startsWith('read attr -')) {
-        def descMap = parseDescriptionAsMap(description) 						//Get level value.
-        value = zigbee.convertHexToInt(descMap.value)
-        log.debug " level = $value"
-        name = "level"
-    }
-    def result = createEvent(name: name, value: value)
-    log.debug "Parse returned ${result?.descriptionText}"
-    return result 
-}
-
-def parseDescriptionAsMap(description) {
-    (description - "read attr - ").split(",").inject([:]) {
-    	map, param ->
-        def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-    }
-}
-
-// Commands to device
-def on() {
-	log.debug "Rooflight Opening"
-    def cmd = []
-	cmd <<"st cmd 0x${device.deviceNetworkId} 0x38 0x0006 0x1 {}"
-	cmd << "delay 250"
-    cmd << zigbee.command(0x0008, 0x04, "64")
-}
-
-def off() {
-	log.debug "Rooflight Closing"
-    def cmd = []
-	cmd << "st cmd 0x${device.deviceNetworkId} 0x38 0x0006 0x0 {}"
-    cmd << "delay 250"
-    cmd << zigbee.command(0x0008, 0x04, "00")
-}
-
-def Stop() {																//Send stop command in the level control cluster.
-	log.debug "send stop"
-	"st cmd 0x${device.deviceNetworkId} 0x38 0x0008 0x07 {}"
-}
-
-def poll() {
-	log.debug "Poll is calling refresh"
-	refresh()
-}
-
-def refresh() {
-    log.debug "sending refresh command"
-    log.debug "Tile State: ${state.tile}"
-    def cmd = []
-    if("${state.tile}" == "0") {											//If rain sensor is connected refresh rain sensor and rooflight position.
-    	cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0006 0x0000"	// Read on / off attribute at End point 0x38 Rooflight open / closed.
-    	cmd << "delay 250"
-        cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0008 0x0000"	// Read Level position at End point 0x38 Rooflight Position.
-        cmd << "delay 250"
-    	cmd << "st rattr 0x${device.deviceNetworkId} 0x41 0x0006 0x0000"	// Read on / off attribute at End point 0x41 Rain sensor.
-    }
-    else {
-        cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0006 0x0000"	// Read on / off attribute at End point 0x38 Rooflight open / closed.
-        cmd << "delay 250"
-        cmd << "st rattr 0x${device.deviceNetworkId} 0x38 0x0008 0x0000"	// Read on / off attribute at End point 0x88 Rain sensor.
-    }
-}

devicetypes/dianoga/netatmo-additional-module.src/netatmo-additional-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Additional Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-basestation.src/netatmo-basestation.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Basestation", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-outdoor-module.src/netatmo-outdoor-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Outdoor Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 	}

devicetypes/dianoga/netatmo-rain.src/netatmo-rain.groovy

@@ -15,6 +15,8 @@
  */
 metadata {
 	definition (name: "Netatmo Rain", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
+	
 		attribute "rain", "number"
         attribute "rainSumHour", "number"
         attribute "rainSumDay", "number"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -33,8 +33,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
             }
             
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
@@ -278,4 +278,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,16 +87,27 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
+	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 	]
 }
 

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,11 +105,21 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def setLevel(value) {

devicetypes/smartthings/cree-bulb.src/README.md

@@ -23,10 +23,8 @@ Works with:
 
 ## Device Health
 
-A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -19,7 +19,6 @@ metadata {
 
         capability "Actuator"
         capability "Configuration"
-        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -67,12 +66,6 @@ def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
         sendEvent(resultMap)
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
     }
     else {
         log.debug "DID NOT PARSE MESSAGE for description : $description"
@@ -96,27 +89,24 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.levelRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.levelRefresh()
 }
 
 def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
-def poll() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+def healthPoll() {
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
+    unschedule()
+    schedule("0 0/5 * * * ? *", "healthPoll")
     log.debug "Configuring Reporting and Bindings."
-    sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -62,7 +62,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-        	log.trace "Parsing description"
+			log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -72,13 +72,13 @@ def parse(description) {
 						log.info "Bridge response: $msg.body"
 					} else {
 						// Sending Bulbs List to parent"
-                        if (parent.state.inBulbDiscovery)
-                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
+					parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -91,7 +91,7 @@ def parse(String description) {
 
         if (descMap.cluster == "0300") {
             if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -203,7 +203,7 @@ def setLevel(value) {
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)

devicetypes/smartthings/osram-lightify-led-flexible-strip-rgbw.src/osram-lightify-led-flexible-strip-rgbw.groovy

@@ -1,4 +1,4 @@
-/* 
+/*
     Osram Flex RGBW Light Strip
 
     Osram bulbs have a firmware issue causing it to forget its dimming level when turned off (via commands). Handling
@@ -8,7 +8,7 @@
 
 metadata {
 	definition (name: "OSRAM LIGHTIFY LED Flexible Strip RGBW", namespace: "smartthings", author: "SmartThings") {
-        
+
         capability "Color Temperature"
         capability "Actuator"
         capability "Switch"
@@ -18,7 +18,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Color Control"
-                        
+
         attribute "colorName", "string"
 
         command "setAdjustedColor"
@@ -49,7 +49,7 @@ metadata {
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", height: 1, width: 2, inactiveLabel: false, range:"(2700..6500)") {
 			state "colorTemperature", action:"color temperature.setColorTemperature"
 		}
@@ -118,7 +118,7 @@ def parse(String description) {
                 }
             }
             else if(descMap.attrId == "0000"){  //Hue Attribute
-                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 360)
+                def hueValue = Math.round(convertHexToInt(descMap.value) / 255 * 100)
                 log.debug "Hue value returned is $hueValue"
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
@@ -274,7 +274,7 @@ private getGenericName(value){
 
 //input Hue Integer values; returns color name for saturation 100%
 private getColorName(hueValue){
-    if(hueValue>360 || hueValue<0)
+    if(hueValue>100 || hueValue<0)
         return
 
     hueValue = Math.round(hueValue / 100 * 360)
@@ -449,7 +449,7 @@ def setColor(value){
         def level = hex(value.level * 255 / 100)
         cmd << zigbeeSetLevel(level)
     }
-    
+
 	if (value.switch == "off") {
 		cmd << "delay 150"
 		cmd << off()

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,9 +47,21 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+
+	]
+
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C1 smart power outlet with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C1 smart power outlet with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*10 = 20 min
+Check-in interval = 12 mins
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,12 +101,6 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
-			// Temporary fix for the case when Device is OFFLINE and is connected again
-			if (state.lastActivity == null){
-				state.lastActivity = now()
-				sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-			}
-			state.lastActivity = now()
 		}
 	}
 	else {
@@ -126,15 +120,7 @@ def on() {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.onOffRefresh()
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -142,8 +128,10 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 1200, displayed: false, data: [protocol: "zigbee"])
-	zigbee.onOffConfig() + powerConfig() + refresh()
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 moisture sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 moisture sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -101,13 +101,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -233,6 +226,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -283,15 +278,7 @@ private Map getMoistureResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -305,23 +292,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -22,10 +22,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 motion sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -105,13 +105,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -248,6 +241,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -294,15 +289,7 @@ private Map getMotionResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else { 
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -316,24 +303,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -206,6 +206,8 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -26,10 +26,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 multi sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 multi sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -127,13 +127,6 @@ def parse(String description) {
 		map = parseIasMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
@@ -313,6 +306,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
@@ -376,15 +371,7 @@ private getAccelerationResult(numValue) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -414,13 +401,16 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
 	def configCmds = enrollResponse() +
 			zigbee.batteryConfig() +
-			zigbee.temperatureConfig() +
+			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,6 +206,8 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 open/closed sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 open/closed sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -92,13 +92,6 @@ def parse(String description) {
     	map = parseIasMessage(description)
     }
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
 
@@ -207,6 +200,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -246,15 +241,7 @@ private Map getContactResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh() {
@@ -268,23 +255,19 @@ def refresh() {
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 2*60 = 120 min
+Check-in interval = 12 mins
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -83,13 +83,6 @@ def parse(String description) {
 		map = parseCustomMessage(description)
 	}
 
-	// Temporary fix for the case when Device is OFFLINE and is connected again
-	if (state.lastActivity == null){
-		state.lastActivity = now()
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
-	state.lastActivity = now()
-
 	log.debug "Parse returned $map"
 	return map ? createEvent(map) : null
 }
@@ -214,6 +207,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
@@ -251,14 +246,7 @@ private Map getHumidityResult(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-	if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-		state.lastActivity = null
-		return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-	} else {
-		log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-	}
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
 }
 
 def refresh()
@@ -276,23 +264,19 @@ def refresh()
 }
 
 def configure() {
-	sendEvent(name: "checkInterval", value: 14400, displayed: false, data: [protocol: "zigbee"])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-
+	def humidityConfigCmds = [
 		"zdo bind 0x${device.deviceNetworkId} 1 1 0xFC45 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 0xFC45 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+
+	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	// battery minReport 30 seconds, maxReportTime 6 hrs by default
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/zigbee-dimmer.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -0,0 +1,36 @@
+# OSRAM Lightify LED On/Off/Dim
+
+
+
+Works with: 
+
+* [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -54,12 +54,6 @@ def parse(String description) {
 
     def event = zigbee.getEvent(description)
     if (event) {
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             sendEvent(event)
@@ -86,15 +80,7 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -103,7 +89,8 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,7 +31,8 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-    }
+	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+	}
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){

devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -0,0 +1,42 @@
+# OSRAM LIGHTIFY LED RGBW Bulb
+
+
+
+Works with: 
+
+* [OSRAM LIGHTIFY LED RGBW Bulb](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - It represents that a device has commands.
+* **Color Control** - It represents that the color attributes of a device can be controlled (hue, saturation, color value).
+* **Color Temperature** - It represents color temperature capability measured in degree Kelvin.
+* **Polling** - It represents that a device can be polled.
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - can detect current light level (0-100 in percent)
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+It may also happen that you need to reset the device.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
 
         capability "Actuator"
         capability "Color Control"
@@ -85,12 +85,6 @@ def parse(String description) {
     def event = zigbee.getEvent(description)
     if (event) {
         log.debug event
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             if (event.name=="colorTemperature") {
@@ -105,7 +99,7 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
@@ -130,15 +124,7 @@ def off() {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -147,9 +133,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -21,6 +21,7 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "0003, 0006, 0019, 0406", manufacturer: "Leviton", model: "ZSS-10", deviceJoinName: "Leviton Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0006", outClusters: "000A", manufacturer: "HAI", model: "65A21-1", deviceJoinName: "Leviton Wireless Load Control Module-30amp"
     }
 
     // simulator metadata
@@ -79,4 +80,4 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.onOffRefresh()
-}
+}

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -0,0 +1,37 @@
+# OSRAM Lightify Tunable 60 White
+
+
+
+Works with: 
+
+* [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Color Temperature** - represents color temperature, measured in degrees Kelvin.
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated.
+* **Refresh** - _refresh()_ command for status updates
+* **Switch** - can detect state (possible values: on/off)
+* **Switch Level** - represents current light level, usually 0-100 in percent
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 mins
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Other troubleshooting tips are listed as follows:
+* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -74,12 +74,6 @@ def parse(String description) {
     log.debug "description is $description"
     def event = zigbee.getEvent(description)
     if (event) {
-        // Temporary fix for the case when Device is OFFLINE and is connected again
-        if (state.lastActivity == null){
-            state.lastActivity = now()
-            sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-        }
-        state.lastActivity = now()
         if (event.name=="level" && event.value==0) {}
         else {
             if (event.name=="colorTemperature") {
@@ -110,15 +104,7 @@ def setLevel(value) {
  * PING is used by Device-Watch in attempt to reach the Device
  * */
 def ping() {
-
-    if (state.lastActivity < (now() - (1000 * device.currentValue("checkInterval"))) ){
-        log.info "ping, alive=no, lastActivity=${state.lastActivity}"
-        state.lastActivity = null
-        return zigbee.onOffRefresh()
-    } else {
-        log.info "ping, alive=yes, lastActivity=${state.lastActivity}"
-        sendEvent(name: "deviceWatch-lastActivity", value: state.lastActivity, description: "Last Activity is on ${new Date((long)state.lastActivity)}", displayed: false, isStateChange: true)
-    }
+    return zigbee.onOffRefresh()
 }
 
 def refresh() {
@@ -127,9 +113,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Enrolls device to Device-Watch with 3 x Reporting interval 30min
-    sendEvent(name: "checkInterval", value: 1800, displayed: false, data: [protocol: "zigbee"])
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

smartapps/curb/curb-control.src/curb-control.groovy

@@ -65,7 +65,16 @@ void updateSwitch() {
 private void updateAll(devices) {
 	def command = request.JSON?.command
 	if (command) {
-		devices."$command"()
+		switch(command) {
+			case "on":
+				devices.on()
+				break
+			case "off":
+				devices.off()
+				break
+			default:
+				httpError(403, "Access denied. This command is not supported by current capability.")
+		}
 	}
 }
 
@@ -77,7 +86,16 @@ private void update(devices) {
 		if (!device) {
 			httpError(404, "Device not found")
 		} else {
-			device."$command"()
+			switch(command) {
+				case "on":
+					device.on()
+					break
+				case "off":
+					device.off()
+					break
+				default:
+					httpError(403, "Access denied. This command is not supported by current capability.")
+			}
 		}
 	}
 }

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -58,7 +58,7 @@ def authPage() {
 	if (canInstallLabs()) {
 
 		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
+		// log.debug "Redirect url = ${redirectUrl}"
 
 		if (state.authToken) {
 			description = "Tap 'Next' to proceed"
@@ -113,13 +113,13 @@ def oauthInitUrl() {
 		scope: "read_station"
 	]
 
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
+	// log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
 	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
 }
 
 def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
+	// log.debug "callback()>> params: $params, params.code ${params.code}"
 
 	def code = params.code
 	def oauthState = params.state
@@ -135,7 +135,7 @@ def callback() {
 			scope: "read_station"
 		]
 
-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+		// log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
 
 		def tokenUrl = getVendorTokenPath()
 		def params = [
@@ -144,7 +144,7 @@ def callback() {
 			body: tokenParams
 		]
 
-		log.debug "PARAMS: ${params}"
+		// log.debug "PARAMS: ${params}"
 
 		httpPost(params) { resp ->
 
@@ -156,7 +156,7 @@ def callback() {
 				state.refreshToken = data.refresh_token
 				state.authToken = data.access_token
 				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
+				// log.debug "swapped token: $resp.data"
 			}
 		}
 
@@ -292,7 +292,7 @@ def refreshToken() {
 
 			response.data.each {key, value ->
 				def data = slurper.parseText(key);
-				log.debug "Data: $data"
+				// log.debug "Data: $data"
 
 				state.refreshToken = data.refresh_token
 				state.accessToken = data.access_token

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- * 
+ *
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,13 +21,18 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -39,9 +44,11 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-	section( "Set your location" ) {
-		input "zipCode", "text", title: "Zip code"
-	}
+
+	if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -72,7 +79,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-	
+
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -98,7 +105,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -125,7 +132,11 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json = getWeatherFeature("conditions", zipCode)
+	def json 
+	if (location.channelName != 'samsungtv')
+		json = getWeatherFeature("conditions", zipCode)
+	else
+		json = getWeatherFeature("conditions")
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -150,4 +161,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -0,0 +1,253 @@
+/**
+ *  Gideon
+ *
+ *  Copyright 2016 Nicola Russo
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gideon",
+    namespace: "gideon.api",
+    author: "Braindrain Solutions",
+    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
+    category: "Family",
+    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
+
+
+preferences {
+	section("Control these switches...") {
+        input "switches", "capability.switch", multiple:true
+    }
+    section("Control these motion sensors...") {
+        input "motions", "capability.motionSensor", multiple:true
+    }
+    section("Control these presence sensors...") {
+    	input "presence_sensors", "capability.presenceSensor", multiple:true
+    }
+    section("Control these outlets...") {
+    	input "outlets", "capability.switch", multiple:true
+    }
+    section("Control these locks...") {
+    	input "locks", "capability.lock", multiple:true
+    }
+    section("Control these locks...") {
+	    input "temperature_sensors", "capability.temperatureMeasurement"
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(outlet, "energy", outletHandler)
+  	subscribe(outlet, "switch", outletHandler)
+}
+
+// TODO: implement event handlers
+def outletHandler(evt) {
+	log.debug "$outlet.currentEnergy"
+	//TODO call G API  
+}
+
+
+private device(it, type) {
+	it ? [id: it.id, label: it.label, type: type] : null
+}
+
+//API Mapping
+mappings {
+	path("/getalldevices") {
+    action: [
+      			GET: "getAllDevices"
+    		]
+  	}
+	path("/doorlocks/:id/:command") {
+    action: [
+      GET: "updateDoorLock"
+    ]
+  }
+  	path("/doorlocks/:id") {
+    action: [
+      			GET: "getDoorLockStatus"
+    		]
+  	}
+  	path("/tempsensors/:id") {
+    action: [
+      GET: "getTempSensorsStatus"
+    ]
+  }
+  	path("/presences/:id") {
+    action: [
+      GET: "getPresenceStatus"
+    ]
+  }
+  	path("/motions/:id") {
+    action: [
+      GET: "getMotionStatus"
+    ]
+  }
+  	path("/outlets/:id") {
+    action: [
+      GET: "getOutletStatus"
+    ]
+  }
+  	path("/outlets/:id/:command") {
+    action: [
+      GET: "updateOutlet"
+    ]
+  }
+  	path("/switches/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+}
+
+//API Methods
+def getAllDevices() {
+	def locks_list = locks.collect{device(it,"Lock")}
+    def presences_list = presence_sensors.collect{device(it,"Presence")}
+    def motions_list = motions.collect{device(it,"Motion")}
+    def outlets_list = outlets.collect{device(it,"Outlet")}
+    def switches_list = switches.collect{device(it,"Switch")}
+    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
+    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
+}
+
+//LOCKS
+def getDoorLockStatus() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('lock')]
+        }
+}
+
+def updateDoorLock() {
+	def command = params.command
+    def device = locks.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentValue('lock') == "locked")
+                  device.unlock();
+                else
+                  device.lock();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//PRESENCE
+def getPresenceStatus() {
+
+	def device = presence_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('presence')]
+   }
+}
+
+//MOTION
+def getMotionStatus() {
+
+	def device = motions.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('motion')]
+   }
+}
+
+//OUTLET
+def getOutletStatus() {
+	
+    def device = outlets.find { it.id == params.id }
+   	if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
+  }
+}
+
+def updateOutlet() {
+	
+    def command = params.command
+    def device = outlets.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}                
+
+//SWITCH
+def updateSwitch() {
+    def command = params.command
+    def device = switches.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//TEMPERATURE
+def getTempSensorsStatus() {
+	
+    def device = temperature_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('temperature')]
+   }
+}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,8 +18,13 @@ definition(
 )
 
 preferences {
-  section("Zip code?") {
-    input "zipcode", "text", title: "Zipcode?"
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
   }
 
   section("Things to check?") {
@@ -60,7 +65,11 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response = getWeatherFeature("forecast", zipcode)
+    def response
+    if (location.channelName != 'samsungtv')
+      response = getWeatherFeature("forecast", zipCode)
+    else
+      response = getWeatherFeature("forecast")
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/imbrianj/safe-watch.src/safe-watch.groovy

@@ -26,9 +26,9 @@ preferences {
   }
 
   section("Temperature monitor?") {
-    input "temp",    "capability.temperatureMeasurement", title: "Temp Sensor", required: false
-    input "maxTemp", "number",                            title: "Max Temp?",   required: false
-    input "minTemp", "number",                            title: "Min Temp?",   required: false
+    input "temp",    "capability.temperatureMeasurement", title: "Temperature Sensor", required: false
+    input "maxTemp", "number",                            title: "Max Temperature (°${location.temperatureScale})",   required: false
+    input "minTemp", "number",                            title: "Min Temperature (°${location.temperatureScale})",   required: false
   }
 
   section("When which people are away?") {

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,6 +4,9 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
+
+include 'asynchttp_v1'
+
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -28,7 +31,7 @@ mappings {
 	path("/receivedToken") { action: [ POST: "receivedToken", GET: "receivedToken"] }
 	path("/receiveToken") { action: [ POST: "receiveToken", GET: "receiveToken"] }
 	path("/hookCallback") { action: [ POST: "hookEventHandler", GET: "hookEventHandler"] }
-    path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}    
+  path("/oauth/initialize") {action: [GET: "oauthInitUrl"]}
 	path("/oauth/callback") { action: [ GET: "callback" ] }
 }
 
@@ -44,7 +47,7 @@ def callback() {
 	} else {
 		log.warn "No authQueryString"
 	}
-	
+
 	if (state.JawboneAccessToken) {
 		log.debug "Access token already exists"
 		setup()
@@ -73,7 +76,7 @@ def callback() {
 
 def authPage() {
     log.debug "authPage"
-    def description = null          
+    def description = null
     if (state.JawboneAccessToken == null) {
 		if (!state.accessToken) {
 			log.debug "About to create access token"
@@ -82,12 +85,13 @@ def authPage() {
         description = "Click to enter Jawbone Credentials"
         def redirectUrl = buildRedirectUrl
         log.debug "RedirectURL = ${redirectUrl}"
-        def donebutton= state.JawboneAccessToken != null 
+        def donebutton= state.JawboneAccessToken != null
         return dynamicPage(name: "Credentials", title: "Jawbone UP", nextPage: null, uninstall: true, install: donebutton) {
+							 section { paragraph title: "Note:", "This device has not been officially tested and certified to “Work with SmartThings”. You can connect it to your SmartThings home but performance may vary and we will not be able to provide support or assistance." }
                section { href url:redirectUrl, style:"embedded", required:true, title:"Jawbone UP", state: hast ,description:description }
         }
     } else {
-        description = "Jawbone Credentials Already Entered." 
+        description = "Jawbone Credentials Already Entered."
         return dynamicPage(name: "Credentials", title: "Jawbone UP", uninstall: true, install:true) {
                section { href url: buildRedirectUrl("receivedToken"), style:"embedded", state: "complete", title:"Jawbone UP", description:description }
         }
@@ -107,7 +111,7 @@ def receiveToken(redirectUrl = null) {
     def params = [
       uri: "https://jawbone.com/auth/oauth2/token?${toQueryString(oauthParams)}",
     ]
-    httpGet(params) { response -> 
+    httpGet(params) { response ->
     	log.debug "${response.data}"
 		log.debug "Setting access token to ${response.data.access_token}, refresh token to ${response.data.refresh_token}"
     	state.JawboneAccessToken = response.data.access_token
@@ -149,7 +153,7 @@ def connectionStatus(message, redirectUrl = null) {
 			<meta http-equiv="refresh" content="3; url=${redirectUrl}" />
 		"""
 	}
-	
+
     def html = """
         <!DOCTYPE html>
         <html>
@@ -229,12 +233,12 @@ def validateCurrentToken() {
 	log.debug "validateCurrentToken"
     def url = "https://jawbone.com/nudge/api/v.1.1/users/@me/refreshToken"
     def requestBody = "secret=${appSettings.clientSecret}"
-	
+
 	try {
 		httpPost(uri: url, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],  body: requestBody) {response ->
 	    	if (response.status == 200) {
 				log.debug "${response.data}"
-				log.debug "Setting refresh token to ${response.data.data.refresh_token}"
+				log.debug "Setting refresh token"
 	     		state.refreshToken = response.data.data.refresh_token
 	        }
 	    }
@@ -258,7 +262,7 @@ def validateCurrentToken() {
 							state.remove("refreshToken")
 						}
 					} else {
-						log.debug "Setting access token to ${data.access_token}, refresh token to ${data.refresh_token}"
+						log.debug "Setting access token"
 						state.JawboneAccessToken = data.access_token
 						state.refreshToken = data.refresh_token
 					}
@@ -271,10 +275,10 @@ def validateCurrentToken() {
 }
 
 def initialize() {
-    log.debug "Callback URL - Webhook"  
-	def localServerUrl = getApiServerUrl() 
+    log.debug "Callback URL - Webhook"
+	def localServerUrl = getApiServerUrl()
 	def hookUrl = "${localServerUrl}/api/token/${state.accessToken}/smartapps/installations/${app.id}/hookCallback"
-    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"      
+    def webhook = "https://jawbone.com/nudge/api/v.1.1/users/@me/pubsub?webhook=$hookUrl"
 	httpPost(uri: webhook, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ])
 }
 
@@ -284,16 +288,16 @@ def setup() {
 
 	if (state.JawboneAccessToken) {
 		def urlmember = "https://jawbone.com/nudge/api/users/@me/"
-		def member = null    
-		httpGet(uri: urlmember, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
+		def member = null
+		httpGet(uri: urlmember, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
 		    member = response.data.data
 		}
-	
+
 		if (member) {
 			state.member = member
 			def externalId = "${app.id}.${member.xid}"
 
-			// find the appropriate child device based on my app id and the device network id 
+			// find the appropriate child device based on my app id and the device network id
 			def deviceWrapper = getChildDevice("${externalId}")
 
 			// invoke the generatePresenceEvent method on the child device
@@ -302,7 +306,8 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        generateInitialEvent (member, childDevice)
+			        childDevice?.generateSleepingEvent(false)
+                    pollChild(childDevice)
 			    }
 			}
 		}
@@ -312,7 +317,7 @@ def setup() {
 }
 
 def installed() {
-	
+
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
@@ -324,7 +329,7 @@ def installed() {
 }
 
 def updated() {
-	
+
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
@@ -348,128 +353,128 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-    def member = state.member 
-    generatePollingEvents (member, childDevice)   
+		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
+
+		def params = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/goals',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseGoals', params, childMap)
+
+		def params2 = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/moves',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseMoves', params2, childMap)
 }
 
-def generatePollingEvents (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals" 
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"  
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"     
-    def goals = null
-    def moves = null
- 	def sleeps = null   
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        goals = response.data.data
-    }   
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        moves = response.data.data.items[0]
-    }    
-   
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps" 
-
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }       
+def responseGoals(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def goals
+			try {
+					// json response already parsed into JSONElement object
+					goals = response.json.data
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (goals) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Goal = ${goals.move_steps} Steps"
+				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
-def generateInitialEvent (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals" 
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"  
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"     
-    def goals = null
-    def moves = null
- 	def sleeps = null   
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        goals = response.data.data
-    }   
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
-        moves = response.data.data.items[0]
-    }    
-    
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps"
-        log.debug "Sleeping state = false"   
-        childDevice?.generateSleepingEvent(false)
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }       
+def responseMoves(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def moves
+			try {
+					// json response already parsed into JSONElement object
+					moves = response.json.data.items[0]
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (moves) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Moves = ${moves.details.steps} Steps"
+				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def setColor (steps,goal,childDevice) {
     def result = steps * 100 / goal
-    if (result < 25) 
+    if (result < 25)
     	childDevice?.sendEvent(name:"steps", value: "steps", label: steps)
-    else if ((result >= 25) && (result < 50)) 
+    else if ((result >= 25) && (result < 50))
         childDevice?.sendEvent(name:"steps", value: "steps1", label: steps)
-    else if ((result >= 50) && (result < 75)) 
+    else if ((result >= 50) && (result < 75))
         childDevice?.sendEvent(name:"steps", value: "steps1", label: steps)
-    else if (result >= 75)     
-        childDevice?.sendEvent(name:"steps", value: "stepsgoal", label: steps)   
+    else if (result >= 75)
+        childDevice?.sendEvent(name:"steps", value: "stepsgoal", label: steps)
 }
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
     log.debug "request = ${request}"
-    
-    def json = request.JSON 
-    
+
+    def json = request.JSON
+
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	def json_action = json.events.action[0]
+	  def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"
     log.debug "Notification Type: " + json_type
-    log.debug "Notification Action: " + json_action 
-    
+    log.debug "Notification Action: " + json_action
+
     // find the appropriate child device based on my app id and the device network id
     def externalId = "${app.id}.${userId}"
     def childDevice = getChildDevice("${externalId}")
-            
+
     if (childDevice) {
-    	switch (json_action) {   
-	        case "enter_sleep_mode":      
-            	childDevice?.generateSleepingEvent(true)           
-                break           
-            case "exit_sleep_mode":       
-            	childDevice?.generateSleepingEvent(false) 
-                break 
-            case "creation": 
+    	switch (json_action) {
+	        case "enter_sleep_mode":
+            	childDevice?.generateSleepingEvent(true)
+                break
+            case "exit_sleep_mode":
+            	childDevice?.generateSleepingEvent(false)
+                break
+            case "creation":
                 childDevice?.sendEvent(name:"steps", value: 0)
           		break
             case "updation":
-                def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"     
-                def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"       
+                def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
+                def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
                 def goals = null
-                def moves = null    
-                httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
+                def moves = null
+                httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
  	               goals = response.data.data
-                }       
-                httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response -> 
+                }
+                httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
                    moves = response.data.data.items[0]
-                }        
+                }
                 log.debug "Goal = ${goals.move_steps} Steps"
-        		log.debug "Steps = ${moves.details.steps} Steps"
+        				log.debug "Steps = ${moves.details.steps} Steps"
                 childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-                childDevice?.sendEvent(name:"goal", value: goals.move_steps)       
-                //setColor(moves.details.steps,goals.move_steps,childDevice)   
+                childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+                //setColor(moves.details.steps,goals.move_steps,childDevice)
                 break
 			case "deletion":
 				app.delete()

smartapps/michaelstruck/smart-home-ventilation.src/smart-home-ventilation.groovy

@@ -14,7 +14,7 @@
  *	for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Smart Home Ventilation",
     namespace: "MichaelStruck",
@@ -164,7 +164,7 @@ def installed() {
 def updated() {
     unschedule()
     turnOffSwitch() //Turn off all switches if the schedules are changed while in mid-schedule
-    unsubscribe
+    unsubscribe()
     log.debug "Updated with settings: ${settings}"
     init()
 }
@@ -174,12 +174,12 @@ def init() {
     schedule (midnightTime, midNight)
 	subscribe(location, "mode", locationHandler)
     startProcess()
-}    
+}
 
 // Common methods
 
 def startProcess () {
-    createDayArray() 
+    createDayArray()
 	state.dayCount=state.data.size()
     if (state.dayCount){
 		state.counter = 0
@@ -190,7 +190,7 @@ def startProcess () {
 def startDay() {
 	def start = convertEpoch(state.data[state.counter].start)
 	def stop = convertEpoch(state.data[state.counter].stop)
-      
+
     runOnce(start, turnOnSwitch, [overwrite: true])
     runOnce(stop, incDay, [overwrite: true])
 }
@@ -218,7 +218,7 @@ def locationHandler(evt) {
     }
 	if (!result) {
     	startProcess()
-    }	
+    }
 }
 
 def midNight(){
@@ -238,7 +238,7 @@ def turnOffSwitch() {
     }
     log.debug "Home ventilation switches are off."
 }
-    
+
 def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
 	def title = ""
 	def dayListClean = "On "
@@ -252,7 +252,7 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
             	dayListClean = "${dayListClean}, "
             }
         }
-	} 
+	}
     else {
     	dayListClean = "Every day"
     }
@@ -272,7 +272,7 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
             	modeListClean = "${modeListClean} ${modePrefix}"
         	}
         }
-	} 
+	}
     else {
     	modeListClean = "${modeListClean}all modes"
     }
@@ -283,16 +283,16 @@ def schedDesc(on1, off1, on2, off2, on3, off3, on4, off4, modeList, dayList) {
     	title += "\nSchedule 2: ${humanReadableTime(on2)} to ${humanReadableTime(off2)}"
     }
     if (on3 && off3) {
-    	title += "\nSchedule 3: ${humanReadableTime(on3)} to ${humanReadableTime(off3)}" 
+    	title += "\nSchedule 3: ${humanReadableTime(on3)} to ${humanReadableTime(off3)}"
     }
     if (on4 && off4) {
-    	title += "\nSchedule 4: ${humanReadableTime(on4)} to ${humanReadableTime(off4)}" 
+    	title += "\nSchedule 4: ${humanReadableTime(on4)} to ${humanReadableTime(off4)}"
     }
     if (on1 || on2 || on3 || on4) {
     	title += "\n$modeListClean"
-    	title += "\n$dayListClean" 
+    	title += "\n$dayListClean"
     }
-    
+
     if (!on1 && !on2 && !on3 && !on4) {
     	title="Click to configure scenario"
     }
@@ -374,7 +374,7 @@ def createDayArray() {
            timeOk(timeOnD1, timeOffD1)
            timeOk(timeOnD2, timeOffD2)
            timeOk(timeOnD3, timeOffD3)
-           timeOk(timeOnD4, timeOffD4)        
+           timeOk(timeOnD4, timeOffD4)
         }
     }
     state.data.sort{it.start}
@@ -384,7 +384,7 @@ def createDayArray() {
 
 private def textAppName() {
 	def text = "Smart Home Ventilation"
-}	
+}
 
 private def textVersion() {
     def text = "Version 2.1.2 (05/31/2015)"
@@ -416,4 +416,4 @@ private def textHelp() {
         "that each scenario does not overlap and run in separate modes (i.e. Home, Out of town, etc). Also note that you should  " +
         "avoid scheduling the ventilation fan at exactly midnight; the app resets itself at that time. It is suggested to start any new schedule " +
         "at 12:15 am or later."
-}
+}

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on Monitor when vibration is sensed",
+    description: "Turn on switch when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When the keyboard is used...") {
+	section("When vibration is sensed...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on/off a light...") {
+section("Turn on switch...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,5 +47,3 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
-
-

smartapps/smartthings/beacon-control.src/beacon-control.groovy

@@ -114,13 +114,16 @@ def beaconHandler(evt) {
 
 	if (allOk) {
 		def data = new groovy.json.JsonSlurper().parseText(evt.data)
-		log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
 
 		def beaconName = getBeaconName(evt)
-		log.debug "<beacon-control> beaconName: $beaconName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> beaconName: $beaconName"
 
 		def phoneName = getPhoneName(data)
-		log.debug "<beacon-control> phoneName: $phoneName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> phoneName: $phoneName"
 		if (phoneName != null) {
             def action = data.presence == "1" ? "arrived" : "left"
             def msg = "$phoneName has $action ${action == 'arrived' ? 'at ' : ''}the $beaconName"

smartapps/smartthings/bon-voyage.src/bon-voyage.groovy

@@ -49,13 +49,15 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,10 +64,12 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
+    def dUnit = evt.unit ?: "Watts"
+
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -78,7 +80,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/flood-alert.src/flood-alert.groovy

@@ -54,10 +54,10 @@ def waterWetHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "wet" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
 		def msg = "${alarm.displayName} is wet!"
-		log.debug "$alarm is wet, texting $phone"
+		log.debug "$alarm is wet, texting phone number"
 
 		if (location.contactBookEnabled) {
 			sendNotificationToContacts(msg, recipients)

smartapps/smartthings/garage-door-monitor.src/garage-door-monitor.groovy

@@ -90,7 +90,7 @@ def takeAction(){
 }
 
 def sendTextMessage() {
-	log.debug "$multisensor was open too long, texting $phone"
+	log.debug "$multisensor was open too long, texting phone"
 
 	updateSmsHistory()
 	def openMinutes = maxOpenTime * (state.smsHistory?.size() ?: 1)

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,17 +454,23 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
+	// send 100% completion event
+	sendTimeRemainingEvent(100)
+
+	// send a non-displayed 0% completion to reset tiles
+	sendTimeRemainingEvent(0, false)
+
+	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
-	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete) {
+def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: true,
+			displayed: displayed,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -474,7 +480,7 @@ def sendTimeRemainingEvent(percentComplete) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: true,
+			displayed: displayed,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -608,8 +614,6 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
-
-	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {
@@ -761,7 +765,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padRight(2, "0")
+	def seconds = "${60 * fraction as int}".padLeft(2, "0")
 	return "${minutes}:${seconds}"
 }
 
@@ -1101,4 +1105,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/greetings-earthling.src/greetings-earthling.groovy

@@ -47,13 +47,13 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }
@@ -71,11 +71,10 @@ def presence(evt)
 			def person = getPerson(evt)
 			def recentNotPresent = person.statesSince("presence", t0).find{it.value == "not present"}
 			if (recentNotPresent) {
-				log.debug "skipping notification of arrival of ${person.displayName} because last departure was only ${now() - recentNotPresent.date.time} msec ago"
+				log.debug "skipping notification of arrival of Person because last departure was only ${now() - recentNotPresent.date.time} msec ago"
 			}
 			else {
 				def message = "${person.displayName} arrived at home, changing mode to '${newMode}'"
-				log.info message
 				send(message)
 				setLocationMode(newMode)
 			}
@@ -106,6 +105,4 @@ private send(msg) {
             sendSms(phone, msg)
         }
     }
-
-	log.debug msg
 }

smartapps/smartthings/habit-helper.src/habit-helper.groovy

@@ -57,12 +57,11 @@ def scheduleCheck()
 	def message = message1 ?: "SmartThings - Habit Helper Reminder!"
 
     if (location.contactBookEnabled) {
-        log.debug "Texting reminder: ($message) to contacts:${recipients?.size()}"
+        log.debug "Texting reminder to contacts:${recipients?.size()}"
         sendNotificationToContacts(message, recipients)
     }
     else {
-
-        log.debug "Texting reminder: ($message) to $phone1"
+        log.debug "Texting reminder"
         sendSms(phone1, message)
     }
 }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -170,7 +170,7 @@ def bulbDiscovery() {
 
 	return dynamicPage(name:"bulbDiscovery", title:"Light Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 		section("Please wait while we discover your Hue Lights. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, options:newLights
+			input "selectedBulbs", "enum", required:false, title:"Select Hue Lights to add (${numFound} found)", multiple:true, submitOnChange: true, options:newLights
 			paragraph title: "Previously added Hue Lights (${existingLights.size()} added)", existingLightsDescription
 		}
 		section {
@@ -724,13 +724,13 @@ private void updateBridgeStatus(childDevice) {
 }
 
 /**
- * Check if all Hue bridges have been heard from in the last 16 minutes, if not an Offline event will be sent
- * for the bridge. Also, set ID number on bridge if not done previously.
+ * Check if all Hue bridges have been heard from in the last 11 minutes, if not an Offline event will be sent
+ * for the bridge and all connected lights. Also, set ID number on bridge if not done previously.
  */
 private void checkBridgeStatus() {
     def bridges = getHueBridges()
-    // Check if each bridge has been heard from within the last 16 minutes (3 poll intervals times 5 minutes plus buffer)
-    def time = now() - (1000 * 60 * 30)
+    // Check if each bridge has been heard from within the last 11 minutes (2 poll intervals times 5 minutes plus buffer)
+    def time = now() - (1000 * 60 * 11)
     bridges.each {
         def d = getChildDevice(it.value.mac)
 	    if(d) {
@@ -740,16 +740,21 @@ private void checkBridgeStatus() {
 				d.sendEvent(name: "idNumber", value: it.value.idNumber)
 		    }
 
-	        if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-	            log.warn "Bridge $it.key is Offline"
-	            d.sendEvent(name: "status", value: "Offline")
-                // set all lights to offline since bridge is not reachable
-                state.bulbs?.each {it.value.online = false}
-	        } else {
+			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
+				log.warn "Bridge $it.key is Offline"
+				d.sendEvent(name: "status", value: "Offline")
+
+				state.bulbs?.each {
+					it.value.online = false
+				}
+				getChildDevices().each {
+					it.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", isStateChange: true, displayed: false)
+				}
+			} else {
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
-	        }
-	    }
-    }
+			}
+		}
+	}
 }
 
 def isValidSource(macAddress) {
@@ -757,6 +762,10 @@ def isValidSource(macAddress) {
 	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
 }
 
+def isInBulbDiscovery() {
+	return state.inBulbDiscovery
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -792,10 +801,12 @@ def parse(childDevice, description) {
 }
 
 // Philips Hue priority for color is  xy > ct > hs
+// For SmartThings, try to always send hue, sat and hex
 private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 	if (device == null || (xy == null && hue == null && sat == null && ct == null))
 		return
 
+	def events = [:]
 	// For now, only care about changing color temperature if requested by user
 	if (ct != null && (colormode == "ct" || (xy == null && hue == null && sat == null))) {
 		// for some reason setting Hue to their specified minimum off 153 yields 154, dealt with below
@@ -809,13 +820,13 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 	if (hue != null) {
 		// 0-65535
 		def value = Math.min(Math.round(hue * 100 / 65535), 65535) as int
-		device.sendEvent([name: "hue", value: value, descriptionText: "Color has changed"])
+		events["hue"] = [name: "hue", value: value, descriptionText: "Color has changed", displayed: false]
                 }
 
 	if (sat != null) {
 		// 0-254
 		def value = Math.round(sat * 100 / 254) as int
-		device.sendEvent([name: "saturation", value: value, descriptionText: "Color has changed"])
+        events["saturation"] = [name: "saturation", value: value, descriptionText: "Color has changed", displayed: false]
             }
 
 	// Following is used to decide what to base hex calculations on since it is preferred to return a colorchange in hex
@@ -827,17 +838,28 @@ private sendColorEvents(device, xy, hue, sat, ct, colormode = null) {
 		def model = state.bulbs[id]?.modelid
 		def hex = colorFromXY(xy, model)
 
-		// TODO Disabled until a solution for the jumping color picker can be figured out
-		//device.sendEvent([name: "color", value: hex.toUpperCase(), descriptionText: "Color has changed", displayed: false])
+		// Create Hue and Saturation events if not previously existing
+		def hsv = hexToHsv(hex)
+		if (events["hue"] == null)
+			events["hue"] = [name: "hue", value: hsv[0], descriptionText: "Color has changed", displayed: false]
+		if (events["saturation"] == null)
+			events["saturation"] = [name: "saturation", value: hsv[1], descriptionText: "Color has changed", displayed: false]
+
+		events["color"] = [name: "color", value: hex.toUpperCase(), descriptionText: "Color has changed", displayed: true]
 	} else if (colormode == "hs" || colormode == null) {
 		// colormode is "hs" or "xy" is missing, default to follow hue/sat which is already handled above
+		def hueValue = (hue != null) ? events["hue"].value : Integer.parseInt("$device.currentHue")
+		def satValue = (sat != null) ? events["saturation"].value : Integer.parseInt("$device.currentSaturation")
 
-		// TODO Disabled until the standard behavior of lights is defined (hue and sat events are sent above)
-		//def hex = colorUtil.hslToHex((int) device.currentHue, (int) device.currentSaturation)
-		// device.sendEvent([name: "color", value: hex.toUpperCase(), descriptionText: "Color has changed"])
+
+		def hex = hsvToHex(hueValue, satValue)
+		events["color"] = [name: "color", value: hex.toUpperCase(), descriptionText: "Color has changed", displayed: true]
 	}
 
-	return debug
+	boolean sendColorChanged = false
+	events.each {
+		device.sendEvent(it.value)
+	}
 }
 
 private sendBasicEvents(device, param, value) {
@@ -878,8 +900,6 @@ private handleCommandResponse(body) {
 	def updates = [:]
 
 	body.each { payload ->
-		log.debug $payload
-
 		if (payload?.success) {
 			def childDeviceNetworkId = app.id + "/"
 			def eventType
@@ -951,6 +971,7 @@ private handlePoll(body) {
 			} else {
 				state.bulbs[bulb.key]?.online = false
 				log.warn "$device is not reachable by Hue bridge"
+				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
 			}
 		}
 	}
@@ -1091,26 +1112,22 @@ def setColor(childDevice, huesettings) {
     def sat = null
     def xy = null
 
-	// For now ignore model to get a consistent color if same color is set across multiple devices
-	// def model = state.bulbs[getId(childDevice)]?.modelid
-    if (huesettings.hex != null) {
+	// Prefer hue/sat over hex to make sure it works with the majority of the smartapps
+	if (huesettings.hue != null || huesettings.sat != null) {
+		// If both hex and hue/sat are set, send all values to bridge to get hue/sat in response from bridge to
+		// generate hue/sat events even though bridge will prioritize XY when setting color
+		if (huesettings.hue != null)
+			value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
+		if (huesettings.saturation != null)
+			value.sat = Math.min(Math.round(huesettings.saturation * 254 / 100), 254)
+	} else if (huesettings.hex != null && false) {
+		// For now ignore model to get a consistent color if same color is set across multiple devices
+		// def model = state.bulbs[getId(childDevice)]?.modelid
 		// value.xy = calculateXY(huesettings.hex, model)
 		// Once groups, or scenes are introduced it might be a good idea to use unique models again
 		value.xy = calculateXY(huesettings.hex)
 	}
 
-	// If both hex and hue/sat are set, send all values to bridge to get hue/sat in response from bridge to
-	// generate hue/sat events even though bridge will prioritize XY when setting color
-        if (huesettings.hue != null)
-            value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-	else
-		value.hue = Math.min(Math.round(childDevice.device?.currentValue("hue") * 65535 / 100), 65535)
-
-        if (huesettings.saturation != null)
-		value.sat = Math.min(Math.round(huesettings.saturation * 254 / 100), 254)
-	else
-		value.sat = Math.min(Math.round(childDevice.device?.currentValue("saturation") * 254 / 100), 254)
-
 /* Disabled for now due to bad behavior via Lightning Wizard
 	if (!value.xy) {
 		// Below will translate values to hex->XY to take into account the color support of the different hue types
@@ -1165,9 +1182,8 @@ private poll() {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/lights/"
 	log.debug "GET: $host$uri"
-	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
-HOST: ${host}
-""", physicalgraph.device.Protocol.LAN, selectedHue))
+	sendHubCommand(new physicalgraph.device.HubAction("GET ${uri} HTTP/1.1\r\n" +
+		"HOST: ${host}\r\n\r\n", physicalgraph.device.Protocol.LAN, selectedHue))
 }
 
 private isOnline(id) {
@@ -1183,13 +1199,11 @@ private put(path, body) {
 	log.debug "PUT:  $host$uri"
 	log.debug "BODY: ${bodyJSON}"
 
-	sendHubCommand(new physicalgraph.device.HubAction("""PUT $uri HTTP/1.1
-HOST: ${host}
-Content-Length: ${length}
-
-${bodyJSON}
-""", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
-
+	sendHubCommand(new physicalgraph.device.HubAction("PUT $uri HTTP/1.1\r\n" +
+		"HOST: ${host}\r\n" +
+		"Content-Length: ${length}\r\n" +
+		"\r\n" +
+		"${bodyJSON}", physicalgraph.device.Protocol.LAN, "${selectedHue}"))
 }
 
 /*
@@ -1647,3 +1661,101 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 		return false;
 	}
 }
+
+/**
+ * Converts an RGB color in hex to HSV.
+ * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
+ *
+ * @param colorStr color value in hex (#ff03d3)
+ *
+ * @return HSV representation in an array (0-100) [hue, sat, value]
+ */
+def hexToHsv(colorStr){
+	def r = Integer.valueOf( colorStr.substring( 1, 3 ), 16 ) / 255
+	def g = Integer.valueOf( colorStr.substring( 3, 5 ), 16 ) / 255
+	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255;
+
+	def max = Math.max(Math.max(r, g), b)
+	def min = Math.min(Math.min(r, g), b)
+
+	def h, s, v = max;
+
+	def d = max - min;
+	s = max == 0 ? 0 : d / max;
+
+	if(max == min){
+		h = 0;
+	}else{
+		switch(max){
+			case r: h = (g - b) / d + (g < b ? 6 : 0); break;
+			case g: h = (b - r) / d + 2; break;
+			case b: h = (r - g) / d + 4; break;
+		}
+		h /= 6;
+	}
+
+	return [(h * 100).round(), (s * 100).round(), (v * 100).round()];
+}
+
+/**
+ * Converts HSV color to RGB in hex.
+ * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
+ *
+ * @param  hue hue 0-100
+ * @param  sat saturation 0-100
+ * @param  value value 0-100 (defaults to 100)
+
+ * @return the color in hex (#ff03d3)
+ */
+def hsvToHex(hue, sat, value = 100){
+	def r, g, b;
+	def h = hue / 100
+	def s = sat / 100
+	def v = value / 100
+
+	def i = Math.floor(h * 6);
+	def f = h * 6 - i;
+	def p = v * (1 - s);
+	def q = v * (1 - f * s);
+	def t = v * (1 - (1 - f) * s);
+
+	switch (i % 6) {
+		case 0:
+			r = v
+			g = t
+			b = p
+			break
+		case 1:
+			r = q
+			g = v
+			b = p
+			break
+		case 2:
+			r = p
+			g = v
+			b = t
+			break
+		case 3:
+			r = p
+			g = q
+			b = v
+			break
+		case 4:
+			r = t
+			g = p
+			b = v
+			break
+		case 5:
+			r = v
+			g = p
+			b = q
+			break
+	}
+
+	// Converting float components to int components.
+	def r1 = String.format("%02X", (int) (r * 255.0f));
+	def g1 = String.format("%02X", (int) (g * 255.0f));
+	def b1 = String.format("%02X", (int) (b * 255.0f));
+
+	return "#$r1$g1$b1"
+}

smartapps/smartthings/it-moved.src/it-moved.groovy

@@ -53,14 +53,14 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
-            log.debug "$accelerationSensor has moved, texting contacts: ${recipients?.size()}"
+            log.debug "accelerationSensor has moved, texting contacts: ${recipients?.size()}"
             sendNotificationToContacts("${accelerationSensor.label ?: accelerationSensor.name} moved", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "accelerationSensor has moved, sending text message"
             sendSms(phone1, "${accelerationSensor.label ?: accelerationSensor.name} moved")
         }
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue >= tooHot } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -50,9 +50,9 @@ def authPage() {
 		}
 		def description = "Tap to enter LIFX credentials"
 		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-//        def redirectUrl = "${apiServerUrl}"
-        log.debug "app id: ${app.id}"
-		log.debug "redirect url: ${redirectUrl}"
+		// def redirectUrl = "${apiServerUrl}"
+		// log.debug "app id: ${app.id}"
+		// log.debug "redirect url: ${redirectUrl}"s
 		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
@@ -372,7 +372,7 @@ def updateDevices() {
 		def childDevice = getChildDevice(device.id)
 		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.product}")
+			// log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,6 +34,7 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
+include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -51,7 +52,7 @@ definition(
 }
 
 preferences(oauthPage: "deviceAuthorization") {
-    page(name: "Credentials", title: "Connect to your Logitech Harmony device", content: "authPage", install: false, nextPage: "deviceAuthorization")
+  page(name: "Credentials", title: "Connect to your Logitech Harmony device", content: "authPage", install: false, nextPage: "deviceAuthorization")
 	page(name: "deviceAuthorization", title: "Logitech Harmony device authorization", install: true) {
 		section("Allow Logitech Harmony to control these things...") {
 			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
@@ -102,32 +103,35 @@ def authPage() {
         description = "Click to enter Harmony Credentials"
         def redirectUrl = buildRedirectUrl
         return dynamicPage(name: "Credentials", title: "Harmony", nextPage: null, uninstall: true, install:false) {
-               section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
+            section { paragraph title: "Note:", "This device has not been officially tested and certified to “Work with SmartThings”. You can connect it to your SmartThings home but performance may vary and we will not be able to provide support or assistance." }
+            section { href url:redirectUrl, style:"embedded", required:true, title:"Harmony", description:description }
         }
     } else {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 3
+		def refreshInterval = 5
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-        def numFoundAct = actoptions.size() ?: 0
+    def numFoundAct = actoptions.size() ?: 0
+
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
+
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
 			}
-            // Virtual activity flag
-            if (numFoundHub > 0 && numFoundAct > 0 && true)
+      // Virtual activity flag
+      if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
 			}
-            if (state.resethub)
+    if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -314,8 +318,6 @@ def installed() {
 }
 
 def updated() {
-	unsubscribe()
-  unschedule()
 	if (!state.accessToken) {
 		log.debug "About to create access token"
 		createAccessToken()
@@ -381,8 +383,6 @@ def discovery() {
             	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
-                getActivityList()
-                poll()
 	        } else {
             	log.debug "Error: $response.status"
             }
@@ -431,142 +431,182 @@ def addDevice() {
 }
 
 def activity(dni,mode) {
-    def Params = [auth: state.HarmonyAccessToken]
-    def msg = "Command failed"
-    def url = ''
+    def tokenParam = [auth: state.HarmonyAccessToken]
+    def url
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
         } else {
-            def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
+          def activityId = aux[2]
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
         }
 	}
-	try {
-    	httpPostJson(uri: url) { response ->
-        	if (response.data.code == 200 || dni == "all") {
-            	msg = "Command sent succesfully"
-            	state.aux = 0
-            } else {
-            	msg = "Command failed. Error: $response.data.code"
-            }
-		}
-    } catch (groovyx.net.http.HttpResponseException ex) {
-        log.error ex
-        if (state.aux == 0) {
-        	state.aux = 1
-        	activity(dni,mode)
-        } else {
-        	msg = ex
-            state.aux = 0
-        }
-    } catch(Exception ex) {
-    	msg = ex
+  def params = [
+      uri: url,
+      contentType: 'application/json'
+  ]
+  asynchttp_v1.post('activityResponse', params)
+  return "Command Sent"
+}
+
+def activityResponse(response, data) {
+  if (response.hasError()) {
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    if (response.status == 401) { // token is expired
+      state.remove("HarmonyAccessToken")
+      log.warn "Logitech Harmony - Access token has expired"
     }
-    runIn(10, "poll", [overwrite: true])
-    return msg
+  } else {
+    def ResponseValues
+    try {
+      // json response already parsed into JSONElement object
+      ResponseValues = response.json
+    } catch (e) {
+      log.error "Logitech Harmony - error parsing json from response: $e"
+    }
+    if (ResponseValues) {
+      if (ResponseValues.code == 200) {
+        log.trace "Command sent succesfully"
+        poll()
+      } else {
+        log.trace "Command failed. Error: $response.data.code"
+      }
+    } else {
+      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+    }
+  }
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	  getActivityList()
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                def map = [:]
-                response.data.hubs.each {
-		            if (it.value.message == "OK") {
-	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-	                    def hub = getChildDevice("harmony-${it.key}")
-	                    if (hub) {
-	                        if (it.value.response.data.currentAvActivity == "-1") {
-	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
-	                        } else {
-	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
-	                        }
-	                    }
-	                } else {
-		                log.trace it.value.message
-	                }
-                }
-                def activities = getChildDevices()
-                def activitynotrunning = true
-                activities.each { activity ->
-                    def act = activity.deviceNetworkId.split('-')
-                    if (act.size() > 2) {
-                        def aux = map.find { it.key == act[1] }
-                        if (aux) {
-                            def aux2 = aux.value.split(',')
-                            def childDevice = getChildDevice(activity.deviceNetworkId)
-                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                                childDevice?.sendEvent(name: "switch", value: "on")
-                                if (aux2[1] == "1")
-                                    runIn(5, "poll", [overwrite: true])
-                            } else {
-                                childDevice?.sendEvent(name: "switch", value: "off")
-                                if (aux2[1] == "3")
-                                    runIn(5, "poll", [overwrite: true])
-                            }
-                        }
+        def tokenParam = [auth: state.HarmonyAccessToken]
+        def params = [
+            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
+            headers: ["Accept": "application/json"],
+            contentType: 'application/json'
+        ]
+        asynchttp_v1.get('pollResponse', params)
+      } else {
+          log.warn "Logitech Harmony - Access token has expired"
+      }
+}
+
+def pollResponse(response, data) {
+	if (response.hasError()) {
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    if (response.status == 401) { // token is expired
+      state.remove("HarmonyAccessToken")
+      log.warn "Logitech Harmony - Access token has expired"
+    }
+	} else {
+			def ResponseValues
+			try {
+					// json response already parsed into JSONElement object
+					ResponseValues = response.json
+			} catch (e) {
+					log.error "Logitech Harmony - error parsing json from response: $e"
+			}
+			if (ResponseValues) {
+        def map = [:]
+        ResponseValues.hubs.each {
+        if (it.value.message == "OK") {
+              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+              def hub = getChildDevice("harmony-${it.key}")
+              if (hub) {
+                  if (it.value.response.data.currentAvActivity == "-1") {
+                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                  } else {
+                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
+                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                  }
+              }
+          } else {
+            log.trace "Logitech Harmony - error response: $it.value.message"
+          }
+        }
+        def activities = getChildDevices()
+        def activitynotrunning = true
+        activities.each { activity ->
+            def act = activity.deviceNetworkId.split('-')
+            if (act.size() > 2) {
+                def aux = map.find { it.key == act[1] }
+                if (aux) {
+                    def aux2 = aux.value.split(',')
+                    def childDevice = getChildDevice(activity.deviceNetworkId)
+                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
+                        childDevice?.sendEvent(name: "switch", value: "on")
+                        if (aux2[1] == "1")
+                            runIn(5, "poll", [overwrite: true])
+                    } else {
+                        childDevice?.sendEvent(name: "switch", value: "off")
+                        if (aux2[1] == "3")
+                            runIn(5, "poll", [overwrite: true])
                     }
                 }
-                return "Poll completed $map - $state.hubs"
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
-              if (e.statusCode == 401) { // token is expired
-                  state.remove("HarmonyAccessToken")
-                  log.warn "Harmony Access token has expired"
-              }
-        } catch (java.net.SocketTimeoutException e) {
-        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
-              state.resethub = true
-        } catch (e) {
-        	log.info "Logitech Harmony - Error: $e"
         }
+			} else {
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+			}
+	}
+}
+
+def getActivityList() {
+    if (state.HarmonyAccessToken) {
+      def tokenParam = [auth: state.HarmonyAccessToken]
+      def params = [
+  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
+  				headers: ["Accept": "application/json"],
+  				contentType: 'application/json'
+  		]
+  		asynchttp_v1.get('activityListResponse', params)
+    } else {
+        log.warn "Logitech Harmony - Access token has expired"
     }
 }
 
-
-def getActivityList() {
-	// GET ACTIVITY'S NAME
-    if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                response.data.hubs.each {
-                    def hub = getChildDevice("harmony-${it.key}")
-                    if (hub) {
-                    	def hubname = getHubName("${it.key}")
-                        def activities = []
-                        def aux = it.value.response.data.activities.size()
-                        if (aux >= 1) {
-                            activities = it.value.response.data.activities.collect {
-                                [id: it.key, name: it.value['name'], type: it.value['type']]
-                            }
-                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                            log.trace activities
-                        }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-					}
-                }
-            }
-        } catch (groovyx.net.http.HttpResponseException e) {
-        	log.trace e
-        } catch (java.net.SocketTimeoutException e) {
-        	log.trace e
-		} catch(Exception e) {
-        	log.trace e
-		}
-    }
-	return activity
+def activityListResponse(response, data) {
+	if (response.hasError()) {
+			log.error "Logitech Harmony - response has error: $response.errorMessage"
+      if (response.status == 401) { // token is expired
+          state.remove("HarmonyAccessToken")
+          log.warn "Logitech Harmony - Access token has expired"
+      }
+	} else {
+			def ResponseValues
+			try {
+					// json response already parsed into JSONElement object
+					ResponseValues = response.json
+			} catch (e) {
+					log.error "Logitech Harmony - error parsing json from response: $e"
+			}
+			if (ResponseValues) {
+          	  ResponseValues.hubs.each {
+              def hub = getChildDevice("harmony-${it.key}")
+              if (hub) {
+                def hubname = getHubName("${it.key}")
+                  def activities = []
+                  def aux = it.value.response?.data.activities.size()
+                  if (aux >= 1) {
+                      activities = it.value.response.data.activities.collect {
+                          [id: it.key, name: it.value['name'], type: it.value['type']]
+                      }
+                      activities += [id: "off", name: "Activity OFF", type: "0"]
+                      log.trace activities
+                  }
+                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+              }
+          }
+			} else {
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def getActivityName(activity,hubId) {
@@ -747,7 +787,7 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "addSubscription, params: ${params}, request: ${data}"
+	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
@@ -809,6 +849,7 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
+      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -111,16 +111,23 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
-		if (pushAndPhone != 'No') {
-			log.debug 'sending push'
-			options.method = 'push'
-			sendNotification(msg, options)
-		}
 		if (phone) {
 			options.phone = phone
-			log.debug 'sending SMS'
-			sendNotification(msg, options)
+			if (pushAndPhone != 'No') {
+				log.debug 'Sending push and SMS'
+				options.method = 'both'
+			} else {
+				log.debug 'Sending SMS'
+				options.method = 'phone'
+			}
+		} else if (pushAndPhone != 'No') {
+			log.debug 'Sending push'
+			options.method = 'push'
+		} else {
+			log.debug 'Sending nothing'
+			options.method = 'none'
 		}
+		sendNotification(msg, options)
 	}
 	if (frequency) {
 		state[evt.deviceId] = now()

smartapps/smartthings/presence-change-push.src/presence-change-push.groovy

@@ -41,10 +41,10 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
     	sendPush("${presence.label ?: presence.name} has arrived at the ${location}")
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
     	sendPush("${presence.label ?: presence.name} has left the ${location}")
 	}
 }

smartapps/smartthings/presence-change-text.src/presence-change-text.groovy

@@ -47,7 +47,7 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has arrived at the ${location}", recipients)
@@ -56,7 +56,7 @@ def presenceHandler(evt) {
             sendSms(phone1, "${presence.label ?: presence.name} has arrived at the ${location}")
         }
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has left the ${location}", recipients)

smartapps/smartthings/ridiculously-automated-garage-door.src/ridiculously-automated-garage-door.groovy

@@ -67,7 +67,7 @@ def updated() {
 }
 
 def subscribe() {
-	log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
+	// log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
 	subscribe(doorSensor, "contact", garageDoorContact)
 
 	subscribe(cars, "presence", carPresence)

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,17 +26,22 @@ definition(
 )
 
 preferences {
-	section ("In addition to push notifications, send text alerts to...") {
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone1", "phone", title: "Phone Number 1", required: false
-            input "phone2", "phone", title: "Phone Number 2", required: false
-            input "phone3", "phone", title: "Phone Number 3", required: false
-        }
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
 	}
 
-	section ("Zip code (optional, defaults to location coordinates)...") {
-		input "zipcode", "text", title: "Zip Code", required: false
-	}
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
+	section ("In addition to push notifications, send text alerts to...") {
+      input("recipients", "contact", title: "Send notifications to") {
+          input "phone1", "phone", title: "Phone Number 1", required: false
+          input "phone2", "phone", title: "Phone Number 2", required: false
+          input "phone3", "phone", title: "Phone Number 3", required: false
+      }
+	 }
 }
 
 def installed() {
@@ -61,7 +66,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipcode)?.alerts
+			alerts = getWeatherFeature("alerts", zipCode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts

smartapps/smartthings/smart-security.src/smart-security.groovy

@@ -71,7 +71,7 @@ def updated() {
 private subscribeToEvents()
 {
 	subscribe intrusionMotions, "motion", intruderMotion
-	subscribe residentMotions, "motion", residentMotion
+	// subscribe residentMotions, "motion", residentMotion
 	subscribe intrusionContacts, "contact", contact
 	subscribe alarms, "alarm", alarm
 	subscribe(app, appTouch)
@@ -156,6 +156,7 @@ def residentMotion(evt)
 	//    	startReArmSequence()
 	//    }
 	//}
+  unsubscribe(residentMotions)
 }
 
 def contact(evt)
@@ -214,7 +215,7 @@ def checkForReArm()
 	}
 	else {
 		log.warn "checkForReArm: lastIntruderMotion was null, unable to check for re-arming intrusion detection"
-	}	
+	}
 }
 
 private startAlarmSequence()

smartapps/smartthings/text-me-when-it-opens.src/text-me-when-it-opens.groovy

@@ -48,7 +48,7 @@ def updated()
 
 def contactOpenHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	log.debug "$contact1 was opened, texting $phone1"
+  log.debug "$contact1 was opened, sending text"
     if (location.contactBookEnabled) {
         sendNotificationToContacts("Your ${contact1.label ?: contact1.name} was opened", recipients)
     }

smartapps/smartthings/text-me-when-theres-motion-and-im-not-here.src/text-me-when-theres-motion-and-im-not-here.groovy

@@ -50,7 +50,7 @@ def updated() {
 
 def motionActiveHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	
+
 	if (presence1.latestValue("presence") == "not present") {
 		// Don't send a continuous stream of text messages
 		def deltaSeconds = 10
@@ -60,14 +60,14 @@ def motionActiveHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+			log.debug "SMS already sent within the last $deltaSeconds seconds"
 		} else {
             if (location.contactBookEnabled) {
                 log.debug "$motion1 has moved while you were out, sending notifications to: ${recipients?.size()}"
                 sendNotificationToContacts("${motion1.label} ${motion1.name} moved while you were out", recipients)
             }
             else {
-                log.debug "$motion1 has moved while you were out, texting $phone1"
+                log.debug "$motion1 has moved while you were out, sending text"
                 sendSms(phone1, "${motion1.label} ${motion1.name} moved while you were out")
             }
 		}

smartapps/smartthings/the-gun-case-moved.src/the-gun-case-moved.groovy

@@ -53,13 +53,13 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent to phone within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
             sendNotificationToContacts("Gun case has moved!", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "$accelerationSensor has moved, texting phone"
             sendSms(phone1, "Gun case has moved!")
         }
 	}

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -86,6 +86,7 @@ def firstPage()
 		def lightSwitchesDiscovered = lightSwitchesDiscovered()
 
 		return dynamicPage(name:"firstPage", title:"Discovery Started!", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
+			section { paragraph title: "Note:", "This device has not been officially tested and certified to “Work with SmartThings”. You can connect it to your SmartThings home but performance may vary and we will not be able to provide support or assistance." }
 			section("Select a device...") {
 				input "selectedSwitches", "enum", required:false, title:"Select Wemo Switches \n(${switchesDiscovered.size() ?: 0} found)", multiple:true, options:switchesDiscovered
 				input "selectedMotions", "enum", required:false, title:"Select Wemo Motions \n(${motionsDiscovered.size() ?: 0} found)", multiple:true, options:motionsDiscovered
@@ -681,4 +682,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}

smartapps/smartthings/withings.src/withings.groovy

@@ -60,7 +60,7 @@ def authPage() {
 
 def oauthInitUrl() {
 	def token = getToken()
-	log.debug "initiateOauth got token: $token"
+	//log.debug "initiateOauth got token: $token"
 
 	// store these for validate after the user takes the oauth journey
 	state.oauth_request_token = token.oauth_token
@@ -76,7 +76,7 @@ def getToken() {
 	]
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/request_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params)
-	log.debug "getToken - url: $url"
+	//log.debug "getToken - url: $url"
 
 	return getJsonFromUrl(url)
 }
@@ -182,7 +182,7 @@ def exchangeToken() {
 
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/access_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params, tokenSecret)
-	log.debug "signed url: $url with secret $tokenSecret"
+	//log.debug "signed url: $url with secret $tokenSecret"
 
 	def token = getJsonFromUrl(url)
 
@@ -198,8 +198,8 @@ def exchangeToken() {
 
 def load() {
 	def json = get(getMeasurement(new Date() - 30))
-
-	log.debug "swapped, then received: $json"
+	// removed logging of actual json payload.  Can be put back for debugging
+	log.debug "swapped, then received json"
 	parse(data:json)
 
 	def html = """