MSA-1517: foscam modified device type

alterSetpoint - check for auto or off mode

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,16 +87,27 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
+	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}"
+		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"delay 200",
+		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 	]
 }
 

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,11 +105,21 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }
 
 def setLevel(value) {

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -97,16 +97,17 @@ def refresh() {
 }
 
 def healthPoll() {
+    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    schedule("0 0/5 * * * ? *", "healthPoll")
+    runEvery5Minutes("healthPoll")
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint","number"
-		attribute "thermostatStatus","string"
+		attribute "thermostatSetpoint", "number"
+		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "number"
+		attribute "deviceTemperatureUnit", "string"
 	}
 
 	tiles {
@@ -655,55 +655,60 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	def targetHeatingSetpoint
-	def targetCoolingSetpoint
-
-	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat" || mode == "auxHeatOnly"){
-		if (temp.value > coolingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = coolingSetpoint
-		}
-	} else if (mode == "cool") {
-		//enforce limits before sending request to cloud
-		if (temp.value < heatingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = heatingSetpoint
-			targetCoolingSetpoint = temp.value
-		}
-	}
-
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow alterSetpoint"
 	} else {
-		log.error "Error alterSetpoint()"
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
+		def deviceId = device.deviceNetworkId.split(/\./).last()
+
+		def targetHeatingSetpoint
+		def targetCoolingSetpoint
+
+		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
-			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			if (temp.value > coolingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = coolingSetpoint
+			}
 		} else if (mode == "cool") {
-			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			//enforce limits before sending request to cloud
+			if (temp.value < heatingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = heatingSetpoint
+				targetCoolingSetpoint = temp.value
+			}
 		}
+
+		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+		} else {
+			log.error "Error alterSetpoint()"
+			if (mode == "heat" || mode == "auxHeatOnly"){
+				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			} else if (mode == "cool") {
+				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			}
+		}
+		generateStatusEvent()
 	}
-	generateStatusEvent()
 }
 
 def generateStatusEvent() {

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,9 +7,11 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
+		capability "Health Check"
+
 		attribute "networkAddress", "string"
-        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-        // Possible values "Online" or "Offline"
+		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+		// Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -42,6 +44,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -70,13 +76,8 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
-					} else {
-						// Sending Bulbs List to parent"
-						if (parent.isInBulbDiscovery())
-							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				}
-				else if (contentType?.contains("xml")) {
+				} else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -85,3 +86,7 @@ def parse(description) {
 	}
 	results
 }
+
+def ping() {
+	log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes
@@ -174,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent.manualRefresh()
+    parent?.manualRefresh()
 }
 
 def verifyPercent(percent) {

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -0,0 +1,37 @@
+# Nyce Door/Window Sensor (Open/Close Sensor)
+
+
+
+Works with:
+
+* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (with possible values - open/closed)
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 Nyce Door/Window sensor that has 12min check-in interval
+
+## Battery Specification
+
+One 3V CR2032 battery required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,25 +19,26 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-    	capability "Battery"
+		capability "Battery"
 		capability "Configuration"
-        capability "Contact Sensor"
+		capability "Contact Sensor"
 		capability "Refresh"
-        
-        command "enrollResponse"
- 
- 
- 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+		capability "Health Check"
+
+		command "enrollResponse"
+
+
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
- 
+
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -273,23 +274,28 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def configCmds = [
-			//battery reporting and heartbeat
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
-
-
+	def enrollCmds = [
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	return configCmds
+	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
@@ -334,7 +340,8 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	[
+	def refreshCmds = [
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
+	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,9 +47,21 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	'zcl on-off on'
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+
+	]
+
 }
 
 def off() {
-	'zcl on-off off'
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -16,7 +16,7 @@
 
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -129,7 +129,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -180,9 +180,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -293,7 +293,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -194,9 +194,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -304,7 +304,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -261,9 +261,9 @@ def updated() {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 		} else {
-			return celsiusToFahrenheit(celsius) as Integer
+			return Math.round(celsiusToFahrenheit(celsius))
 		}
 	}
 
@@ -402,7 +402,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -256,7 +256,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -265,7 +265,7 @@ def refresh()
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -0,0 +1,42 @@
+# Tyco Door Window Sensor
+
+
+
+Works with: 
+
+* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (open/close)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - can measure the device temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Contact sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 min
+
+## Battery Specification
+
+3V CR2032 battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
+Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
+It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -229,44 +230,42 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
+}
+
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	[
+	def refreshCmds = [
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
-        "delay 500"
 	]
-    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/virtual-foscam.src/virtual-foscam.groovy

@@ -0,0 +1,154 @@
+import static java.util.UUID.randomUUID 
+import java.security.MessageDigest
+import javax.crypto.spec.SecretKeySpec
+import javax.crypto.Mac
+import java.security.SignatureException
+
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Virtual Foscam", namespace: "smartthings", author: "sidoh") {
+		capability "Actuator"
+		capability "Image Capture"
+        capability "Switch"
+        
+        command "enableRecording"
+        command "disableRecording"
+        
+        attribute "preset", "enum", ["Door", "Couch", "Table"]
+        command "setPresetDoor"
+        command "setPresetCouch"
+        command "setPresetTable"
+	}
+    
+    preferences {
+    	input "camera", "text", title: "Camera Identifier", displayDuringSetup: true
+    }
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		standardTile("camera", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: true) {
+			state "default", label: "", action: "", icon: "st.camera.dropcam-centered", backgroundColor: "#FFFFFF"
+		}
+
+		carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+
+		standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+			state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.dropcam", backgroundColor: "#FFFFFF", nextState:"taking"
+			state "taking", label:'Taking', action: "", icon: "st.camera.dropcam", backgroundColor: "#53a7c0"
+			state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.dropcam", backgroundColor: "#FFFFFF", nextState:"taking"
+		}
+        
+        standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.Entertainment.entertainment9", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.Entertainment.entertainment9", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', icon:"st.Entertainment.entertainment9", backgroundColor:"#79b821"
+            state "turningOff", label:'${name}', icon:"st.Entertainment.entertainment9", backgroundColor:"#ffffff"
+		}
+        
+        standardTile("presetDoor", "device.preset", width: 1, height: 1, canChangeIcon: true) {
+        	state "Door", label: '${name}', backgroundColor:"#79b821", action: "setPresetDoor"
+        }
+        
+        standardTile("presetCouch", "device.preset", width: 1, height: 1, canChangeIcon: true) {
+        	state "Couch", label: '${name}', backgroundColor:"#79b821", action: "setPresetCouch"
+        }
+        
+        standardTile("presetTable", "device.preset", width: 1, height: 1, canChangeIcon: true) {
+        	state "Table", label: '${name}', backgroundColor:"#79b821", action: "setPresetTable"
+        }
+
+		main "switch"
+		details(["cameraDetails", "take", "switch", "presetDoor", "presetCouch", "presetTable"])
+	}
+}
+
+def setPresetDoor() {
+	setPreset("Door")
+}
+
+def setPresetCouch() {
+	setPreset("Couch")
+}
+
+def setPresetTable() {
+	setPreset("Table")
+}
+
+def on() {
+	sendEvent(name: "switch", value: "on")
+    gwPost('', [recording: true])
+}
+
+def off() {
+	sendEvent(name: "switch", value: "off")
+    gwPost('', [recording: false])
+}
+
+def take() {
+	log.info "Executing 'take'"
+
+	gwGet('/snapshot.jpg') {
+    	final def imageName = "${randomUUID() as String}.jpg"
+		storeImage(imageName, it.data)
+    }
+}
+
+def hmac(String data, String key) throws SignatureException {
+  final Mac hmacSha1;
+  try {
+     hmacSha1 = Mac.getInstance("HmacSHA1");
+  } catch (Exception nsae) {
+     hmacSha1 = Mac.getInstance("HMAC-SHA-1");         
+  }
+  
+  final SecretKeySpec macKey = new SecretKeySpec(key.getBytes(), "RAW");
+  hmacSha1.init(macKey);
+  
+  final byte[] signature =  hmacSha1.doFinal(data.getBytes());
+  
+  return signature.encodeHex()
+}
+
+def getHmacHeaders() {
+    final def payload = randomUUID() as String
+    long time = new Date().getTime() 
+    time /= 1000L
+    
+    final String signature = hmac(payload + time, '<security_token>')
+
+    [
+        'X-Signature-Timestamp': time,
+        'X-Signature-Payload': payload,
+        'X-Signature': signature
+    ]
+}
+
+def setPreset(preset) {
+	gwPost('', [preset: preset])
+    runIn(2, take)
+    sendEvent(name: 'preset', value: preset)
+}
+
+def gwPost(path, params, success = {}) {
+    httpPost(
+    	[
+            uri: ("http://<ha_gateway_url>/camera/${settings.camera}${path}"),
+            body: params,
+            headers: getHmacHeaders(),
+            success: success
+        ]
+    )
+}
+
+def gwGet(path, success = {}) {
+    httpGet(
+    	[
+            uri: ("http://<ha_gateway_url>/camera/${settings.camera}${path}"),
+            headers: getHmacHeaders(),
+            success: success
+        ]
+    )
+}

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -90,7 +90,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,7 +31,8 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-    }
+	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+	}
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Control"
@@ -134,7 +134,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -114,7 +114,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- * 
+ *
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,13 +21,18 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -39,9 +44,11 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-	section( "Set your location" ) {
-		input "zipCode", "text", title: "Zip code"
-	}
+
+	if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -72,7 +79,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-	
+
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -98,7 +105,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -125,7 +132,11 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json = getWeatherFeature("conditions", zipCode)
+	def json 
+	if (location.channelName != 'samsungtv')
+		json = getWeatherFeature("conditions", zipCode)
+	else
+		json = getWeatherFeature("conditions")
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -150,4 +161,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -0,0 +1,253 @@
+/**
+ *  Gideon
+ *
+ *  Copyright 2016 Nicola Russo
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Gideon",
+    namespace: "gideon.api",
+    author: "Braindrain Solutions",
+    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
+    category: "Family",
+    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
+    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
+
+
+preferences {
+	section("Control these switches...") {
+        input "switches", "capability.switch", multiple:true
+    }
+    section("Control these motion sensors...") {
+        input "motions", "capability.motionSensor", multiple:true
+    }
+    section("Control these presence sensors...") {
+    	input "presence_sensors", "capability.presenceSensor", multiple:true
+    }
+    section("Control these outlets...") {
+    	input "outlets", "capability.switch", multiple:true
+    }
+    section("Control these locks...") {
+    	input "locks", "capability.lock", multiple:true
+    }
+    section("Control these locks...") {
+	    input "temperature_sensors", "capability.temperatureMeasurement"
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    subscribe(outlet, "energy", outletHandler)
+  	subscribe(outlet, "switch", outletHandler)
+}
+
+// TODO: implement event handlers
+def outletHandler(evt) {
+	log.debug "$outlet.currentEnergy"
+	//TODO call G API  
+}
+
+
+private device(it, type) {
+	it ? [id: it.id, label: it.label, type: type] : null
+}
+
+//API Mapping
+mappings {
+	path("/getalldevices") {
+    action: [
+      			GET: "getAllDevices"
+    		]
+  	}
+	path("/doorlocks/:id/:command") {
+    action: [
+      GET: "updateDoorLock"
+    ]
+  }
+  	path("/doorlocks/:id") {
+    action: [
+      			GET: "getDoorLockStatus"
+    		]
+  	}
+  	path("/tempsensors/:id") {
+    action: [
+      GET: "getTempSensorsStatus"
+    ]
+  }
+  	path("/presences/:id") {
+    action: [
+      GET: "getPresenceStatus"
+    ]
+  }
+  	path("/motions/:id") {
+    action: [
+      GET: "getMotionStatus"
+    ]
+  }
+  	path("/outlets/:id") {
+    action: [
+      GET: "getOutletStatus"
+    ]
+  }
+  	path("/outlets/:id/:command") {
+    action: [
+      GET: "updateOutlet"
+    ]
+  }
+  	path("/switches/:command") {
+    action: [
+      PUT: "updateSwitch"
+    ]
+  }
+}
+
+//API Methods
+def getAllDevices() {
+	def locks_list = locks.collect{device(it,"Lock")}
+    def presences_list = presence_sensors.collect{device(it,"Presence")}
+    def motions_list = motions.collect{device(it,"Motion")}
+    def outlets_list = outlets.collect{device(it,"Outlet")}
+    def switches_list = switches.collect{device(it,"Switch")}
+    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
+    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
+}
+
+//LOCKS
+def getDoorLockStatus() {
+	def device = locks.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('lock')]
+        }
+}
+
+def updateDoorLock() {
+	def command = params.command
+    def device = locks.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentValue('lock') == "locked")
+                  device.unlock();
+                else
+                  device.lock();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//PRESENCE
+def getPresenceStatus() {
+
+	def device = presence_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('presence')]
+   }
+}
+
+//MOTION
+def getMotionStatus() {
+
+	def device = motions.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('motion')]
+   }
+}
+
+//OUTLET
+def getOutletStatus() {
+	
+    def device = outlets.find { it.id == params.id }
+   	if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
+  }
+}
+
+def updateOutlet() {
+	
+    def command = params.command
+    def device = outlets.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}                
+
+//SWITCH
+def updateSwitch() {
+    def command = params.command
+    def device = switches.find { it.id == params.id }
+    if (command){
+        if (!device) {
+            httpError(404, "Device not found")
+        } else {
+            if(command == "toggle")
+            {
+                if(device.currentSwitch == "on")
+                  device.off();
+                else
+                  device.on();
+                  
+                return [Device_id: params.id, result_action: "200"]
+            }
+        }
+    }
+}
+
+//TEMPERATURE
+def getTempSensorsStatus() {
+	
+    def device = temperature_sensors.find { it.id == params.id }
+    if (!device) {
+            httpError(404, "Device not found")
+        } else {
+        	return [Device_state: device.currentValue('temperature')]
+   }
+}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,8 +18,13 @@ definition(
 )
 
 preferences {
-  section("Zip code?") {
-    input "zipcode", "text", title: "Zipcode?"
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	}
+
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
   }
 
   section("Things to check?") {
@@ -60,7 +65,11 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response = getWeatherFeature("forecast", zipcode)
+    def response
+    if (location.channelName != 'samsungtv')
+      response = getWeatherFeature("forecast", zipCode)
+    else
+      response = getWeatherFeature("forecast")
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,6 +4,9 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
+
+include 'asynchttp_v1'
+
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -303,7 +306,8 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        generateInitialEvent (member, childDevice)
+			        childDevice?.generateSleepingEvent(false)
+                    pollChild(childDevice)
 			    }
 			}
 		}
@@ -349,67 +353,67 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-    def member = state.member
-    generatePollingEvents (member, childDevice)
+		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
+
+		def params = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/goals',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseGoals', params, childMap)
+
+		def params2 = [
+				uri: 'https://jawbone.com',
+				path: '/nudge/api/users/@me/moves',
+				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
+				contentType: 'application/json'
+		]
+
+		asynchttp_v1.get('responseMoves', params2, childMap)
 }
 
-def generatePollingEvents (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
-    def goals = null
-    def moves = null
- 	def sleeps = null
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        goals = response.data.data
-    }
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        moves = response.data.data.items[0]
-    }
-
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps"
-
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }
+def responseGoals(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def goals
+			try {
+					// json response already parsed into JSONElement object
+					goals = response.json.data
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (goals) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Goal = ${goals.move_steps} Steps"
+				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
-def generateInitialEvent (member, childDevice) {
-    // lets figure out if the member is currently "home" (At the place)
-    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
-    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
-    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
-    def goals = null
-    def moves = null
- 	def sleeps = null
-    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        goals = response.data.data
-    }
-    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-        moves = response.data.data.items[0]
-    }
-
-    try { // we are going to just ignore any errors
-        log.debug "Member = ${member.first}"
-        log.debug "Moves Goal = ${goals.move_steps} Steps"
-        log.debug "Moves = ${moves.details.steps} Steps"
-        log.debug "Sleeping state = false"
-        childDevice?.generateSleepingEvent(false)
-        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-    	//setColor(moves.details.steps,goals.move_steps,childDevice)
-    }
-    catch (e) {
-            // eat it
-    }
+def responseMoves(response, dni) {
+	if (response.hasError()) {
+			log.error "response has error: $response.errorMessage"
+	} else {
+			def moves
+			try {
+					// json response already parsed into JSONElement object
+					moves = response.json.data.items[0]
+			} catch (e) {
+					log.error "error parsing json from response: $e"
+			}
+			if (moves) {
+				def childDevice = getChildDevice(dni.value)
+				log.debug "Moves = ${moves.details.steps} Steps"
+				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+			} else {
+					log.debug "did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def setColor (steps,goal,childDevice) {
@@ -433,7 +437,7 @@ def hookEventHandler() {
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	def json_action = json.events.action[0]
+	  def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,17 +454,23 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
+	// send 100% completion event
+	sendTimeRemainingEvent(100)
+
+	// send a non-displayed 0% completion to reset tiles
+	sendTimeRemainingEvent(0, false)
+
+	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
-	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete) {
+def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: true,
+			displayed: displayed,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -474,7 +480,7 @@ def sendTimeRemainingEvent(percentComplete) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: true,
+			displayed: displayed,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -608,8 +614,6 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
-
-	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -83,7 +83,7 @@ def bridgeDiscovery(params=[:])
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
 		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options
+			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
 }
@@ -131,10 +131,7 @@ def bulbDiscovery() {
 	def refreshInterval = 3
 	state.inBulbDiscovery = true
 	def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-		subscribe(bridge, "bulbList", bulbListData)
-	}
+
 	state.bridgeRefreshCount = 0
 	def allLightsFound = bulbsDiscovered() ?: [:]
 
@@ -259,10 +256,6 @@ Map bulbsDiscovered() {
 	return bulbmap
 }
 
-def bulbListData(evt) {
-	state.bulbs = evt.jsonData
-}
-
 Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
@@ -316,29 +309,6 @@ def uninstalled(){
 	state.username = null
 }
 
-// Handles events to add new bulbs
-def bulbListHandler(hub, data = "") {
-	def msg = "Bulbs list not processed. Only while in settings menu."
-    def bulbs = [:]
-	if (state.inBulbDiscovery) {
-        def logg = ""
-        log.trace "Adding bulbs to state..."
-        state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)
-        object.each { k,v ->
-            if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
-        }
-    }
-    def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-	}
-    bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
-    msg = "${bulbs.size()} bulbs found. ${bulbs}"
-	return msg
-}
-
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -490,24 +460,25 @@ def ssdpBridgeHandler(evt) {
 		def host = ip + ":" + port
 		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
 		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
-		def dni = "${parsedEvent.mac}"
-		def d = getChildDevice(dni)
+		def dniReceived = "${parsedEvent.mac}"
+		def currentDni = dstate.mac
+		def d = getChildDevice(dniReceived)
 		def networkAddress = null
 		if (!d) {
-			childDevices.each {
-				if (it.getDeviceDataByName("mac")) {
-					def newDNI = "${it.getDeviceDataByName("mac")}"
-					d = it
-					if (newDNI != it.deviceNetworkId) {
-						def oldDNI = it.deviceNetworkId
-						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-						it.setDeviceNetworkId("${newDNI}")
-						if (oldDNI == selectedHue) {
-							app.updateSetting("selectedHue", newDNI)
-						}
-						doDeviceSync()
-					}
+			// There might be a mismatch between bridge DNI and the actual bridge mac address, correct that
+			log.debug "Bridge with $dniReceived not found"
+			def bridge = childDevices.find { it.deviceNetworkId == currentDni }
+			if (bridge != null) {
+				log.warn "Bridge is set to ${bridge.deviceNetworkId}, updating to $dniReceived"
+				bridge.setDeviceNetworkId("${dniReceived}")
+				dstate.mac = dniReceived
+				// Check to see if selectedHue is a valid bridge, otherwise update it
+				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				if (isSelectedValid == null) {
+					log.warn "Correcting selectedHue in state"
+					app.updateSetting("selectedHue", dniReceived)
 				}
+				doDeviceSync()
 			}
 		} else {
 			updateBridgeStatus(d)
@@ -525,6 +496,18 @@ def ssdpBridgeHandler(evt) {
 				d.sendEvent(name:"networkAddress", value: host)
 				d.updateDataValue("networkAddress", host)
 			}
+			if (dstate.mac != dniReceived) {
+				log.warn "Correcting bridge mac address in state"
+				dstate.mac = dniReceived
+			}
+			if (selectedHue != dniReceived) {
+				// Check to see if selectedHue is a valid bridge, otherwise update it
+				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				if (isSelectedValid == null) {
+					log.warn "Correcting selectedHue in state"
+					app.updateSetting("selectedHue", dniReceived)
+				}
+			}
 		}
 	}
 }
@@ -557,11 +540,8 @@ void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
 	if (isValidSource(hubResponse.mac)) {
 		def body = hubResponse.json
 		if (!body?.state?.on) { //check if first time poll made it here by mistake
-			def bulbs = getHueBulbs()
 			log.debug "Adding bulbs to state!"
-			body.each { k, v ->
-				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
-			}
+			updateBulbState(body, hubResponse.hubId)
 		}
 	}
 }
@@ -677,11 +657,8 @@ def locationHandler(evt) {
 			} else {
 				//GET /api/${state.username}/lights response (application/json)
 				if (!body?.state?.on) { //check if first time poll made it here by mistake
-					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
-					body.each { k,v ->
-						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
-					}
+					updateBulbState(body, parsedEvent.hub)
 				}
 			}
 		}
@@ -741,7 +718,7 @@ private void checkBridgeStatus() {
 		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.key is Offline"
+				log.warn "Bridge $it.value.idNumber is Offline"
 				d.sendEvent(name: "status", value: "Offline")
 
 				state.bulbs?.each {
@@ -766,6 +743,31 @@ def isInBulbDiscovery() {
 	return state.inBulbDiscovery
 }
 
+private updateBulbState(messageBody, hub) {
+	def bulbs = getHueBulbs()
+
+	// Copy of bulbs used to locate old lights in state that are no longer on bridge
+	def toRemove = [:]
+	toRemove << bulbs
+
+	messageBody.each { k,v ->
+
+		if (v instanceof Map) {
+			if (bulbs[k] == null) {
+				bulbs[k] = [:]
+			}
+			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, remove: false]
+			toRemove.remove(k)
+		}
+	}
+
+	// Remove bulbs from state that are no longer discovered
+	toRemove.each { k,v ->
+		log.warn "${bulbs[k].name} no longer exists on bridge, removing"
+		bulbs.remove(k)
+	}
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -950,6 +952,14 @@ private handleCommandResponse(body) {
  * @return empty array
  */
 private handlePoll(body) {
+	// Used to track "unreachable" time
+	// Device is considered "offline" if it has been in the "unreachable" state for
+	// 11 minutes (e.g. two poll intervals)
+	// Note, Hue Bridge marks devices as "unreachable" often even when they accept commands
+	Calendar time11 = Calendar.getInstance()
+	time11.add(Calendar.MINUTE, -11)
+	Calendar currentTime = Calendar.getInstance()
+
 	def bulbs = getChildDevices()
 	for (bulb in body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
@@ -959,7 +969,10 @@ private handlePoll(body) {
 					// light just came back online, notify device watch
 					def lastActivity = now()
 					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+					log.debug "$device is Online"
 				}
+				// Mark light as "online"
+				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
 
 				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
@@ -969,9 +982,18 @@ private handlePoll(body) {
 					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
 				}
 			} else {
-				state.bulbs[bulb.key]?.online = false
-				log.warn "$device is not reachable by Hue bridge"
-				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+				if (state.bulbs[bulb.key]?.unreachableSince == null) {
+					// Store the first time where device was reported as "unreachable"
+					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
+				} else if (state.bulbs[bulb.key]?.online) {
+					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
+						log.warn "$device went Offline"
+						state.bulbs[bulb.key]?.online = false
+						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+					}
+				}
+				log.warn "$device may not reachable by Hue bridge"
 			}
 		}
 	}
@@ -1006,9 +1028,6 @@ def hubVerification(bodytext) {
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
@@ -1018,9 +1037,6 @@ def on(childDevice) {
 def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
@@ -1030,9 +1046,6 @@ def off(childDevice) {
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 1 - 254
     def level
@@ -1057,10 +1070,6 @@ def setLevel(childDevice, percent) {
 def setSaturation(childDevice, percent) {
 	log.debug "Executing 'setSaturation($percent)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
-
 	updateInProgress()
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
@@ -1073,9 +1082,6 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
@@ -1088,9 +1094,6 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
@@ -1102,9 +1105,6 @@ def setColorTemperature(childDevice, huesettings) {
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 
     def value = [:]
@@ -1120,7 +1120,7 @@ def setColor(childDevice, huesettings) {
 			value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
 		if (huesettings.saturation != null)
 			value.sat = Math.min(Math.round(huesettings.saturation * 254 / 100), 254)
-	} else if (huesettings.hex != null && false) {
+	} else if (huesettings.hex != null) {
 		// For now ignore model to get a consistent color if same color is set across multiple devices
 		// def model = state.bulbs[getId(childDevice)]?.modelid
 		// value.xy = calculateXY(huesettings.hex, model)
@@ -1162,7 +1162,14 @@ def setColor(childDevice, huesettings) {
 }
 
 def ping(childDevice) {
-	if (isOnline(getId(childDevice))) {
+	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
+		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
+			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
+			return "Bridge is Online"
+		} else {
+			return "Bridge is Offline"
+		}
+	} else if (isOnline(getId(childDevice))) {
 		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
 		return "Device is Online"
 	} else {
@@ -1224,7 +1231,7 @@ private getBridgeIP() {
     	if (d) {
         	if (d.getDeviceDataByName("networkAddress"))
             	host =  d.getDeviceDataByName("networkAddress")
-            else
+        else
         		host = d.latestState('networkAddress').stringValue
         }
         if (host == null || host == "") {
@@ -1663,7 +1670,7 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 }
 
 /**
- * Converts an RGB color in hex to HSV.
+ * Converts an RGB color in hex to HSV/HSB.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param colorStr color value in hex (#ff03d3)
@@ -1673,32 +1680,32 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 def hexToHsv(colorStr){
 	def r = Integer.valueOf( colorStr.substring( 1, 3 ), 16 ) / 255
 	def g = Integer.valueOf( colorStr.substring( 3, 5 ), 16 ) / 255
-	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255;
+	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255
 
 	def max = Math.max(Math.max(r, g), b)
 	def min = Math.min(Math.min(r, g), b)
 
-	def h, s, v = max;
+	def h, s, v = max
 
-	def d = max - min;
-	s = max == 0 ? 0 : d / max;
+	def d = max - min
+	s = max == 0 ? 0 : d / max
 
 	if(max == min){
-		h = 0;
+		h = 0
 	}else{
 		switch(max){
-			case r: h = (g - b) / d + (g < b ? 6 : 0); break;
-			case g: h = (b - r) / d + 2; break;
-			case b: h = (r - g) / d + 4; break;
+			case r: h = (g - b) / d + (g < b ? 6 : 0); break
+			case g: h = (b - r) / d + 2; break
+			case b: h = (r - g) / d + 4; break
 		}
 		h /= 6;
 	}
 
-	return [(h * 100).round(), (s * 100).round(), (v * 100).round()];
+	return [Math.round(h * 100), Math.round(s * 100), Math.round(v * 100)]
 }
 
 /**
- * Converts HSV color to RGB in hex.
+ * Converts HSV/HSB color to RGB in hex.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param  hue hue 0-100
@@ -1713,11 +1720,11 @@ def hsvToHex(hue, sat, value = 100){
 	def s = sat / 100
 	def v = value / 100
 
-	def i = Math.floor(h * 6);
-	def f = h * 6 - i;
-	def p = v * (1 - s);
-	def q = v * (1 - f * s);
-	def t = v * (1 - (1 - f) * s);
+	def i = Math.floor(h * 6)
+	def f = h * 6 - i
+	def p = v * (1 - s)
+	def q = v * (1 - f * s)
+	def t = v * (1 - (1 - f) * s)
 
 	switch (i % 6) {
 		case 0:
@@ -1753,9 +1760,9 @@ def hsvToHex(hue, sat, value = 100){
 	}
 
 	// Converting float components to int components.
-	def r1 = String.format("%02X", (int) (r * 255.0f));
-	def g1 = String.format("%02X", (int) (g * 255.0f));
-	def b1 = String.format("%02X", (int) (b * 255.0f));
+	def r1 = String.format("%02X", (int) (r * 255.0f))
+	def g1 = String.format("%02X", (int) (g * 255.0f))
+	def b1 = String.format("%02X", (int) (b * 255.0f))
 
 	return "#$r1$g1$b1"
 }

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,6 +34,7 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
+include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -109,26 +110,28 @@ def authPage() {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 3
+		def refreshInterval = 5
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-        def numFoundAct = actoptions.size() ?: 0
+    def numFoundAct = actoptions.size() ?: 0
+
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
+
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
 			}
-            // Virtual activity flag
-            if (numFoundHub > 0 && numFoundAct > 0 && true)
+      // Virtual activity flag
+      if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
 			}
-            if (state.resethub)
+    if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -359,7 +362,7 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	it.value.response.data.activities.each {
+        	  it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
@@ -380,8 +383,6 @@ def discovery() {
             	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
-                getActivityList()
-                poll()
 	        } else {
             	log.debug "Error: $response.status"
             }
@@ -430,142 +431,123 @@ def addDevice() {
 }
 
 def activity(dni,mode) {
-    def Params = [auth: state.HarmonyAccessToken]
-    def msg = "Command failed"
-    def url = ''
+    def tokenParam = [auth: state.HarmonyAccessToken]
+    def url
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
         } else {
-            def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
+          def activityId = aux[2]
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
         }
 	}
-	try {
-    	httpPostJson(uri: url) { response ->
-        	if (response.data.code == 200 || dni == "all") {
-            	msg = "Command sent succesfully"
-            	state.aux = 0
-            } else {
-            	msg = "Command failed. Error: $response.data.code"
-            }
-		}
-    } catch (groovyx.net.http.HttpResponseException ex) {
-        log.error ex
-        if (state.aux == 0) {
-        	state.aux = 1
-        	activity(dni,mode)
-        } else {
-        	msg = ex
-            state.aux = 0
-        }
-    } catch(Exception ex) {
-    	msg = ex
+  def params = [
+      uri: url,
+      contentType: 'application/json'
+  ]
+  asynchttp_v1.post('activityResponse', params)
+  return "Command Sent"
+}
+
+def activityResponse(response, data) {
+  if (response.hasError()) {
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    if (response.status == 401) { // token is expired
+      state.remove("HarmonyAccessToken")
+      log.warn "Logitech Harmony - Access token has expired"
     }
-    runIn(10, "poll", [overwrite: true])
-    return msg
+  } else {
+    if (response.status == 200) {
+      log.trace "Command sent succesfully"
+      poll()
+    } else {
+      log.trace "Command failed. Error: $response.status"
+    }
+  }
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-    	  getActivityList()
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                def map = [:]
-                response.data.hubs.each {
-		            if (it.value.message == "OK") {
-	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-	                    def hub = getChildDevice("harmony-${it.key}")
-	                    if (hub) {
-	                        if (it.value.response.data.currentAvActivity == "-1") {
-	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
-	                        } else {
-	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
-	                        }
-	                    }
-	                } else {
-		                log.trace it.value.message
-	                }
-                }
-                def activities = getChildDevices()
-                def activitynotrunning = true
-                activities.each { activity ->
-                    def act = activity.deviceNetworkId.split('-')
-                    if (act.size() > 2) {
-                        def aux = map.find { it.key == act[1] }
-                        if (aux) {
-                            def aux2 = aux.value.split(',')
-                            def childDevice = getChildDevice(activity.deviceNetworkId)
-                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                                childDevice?.sendEvent(name: "switch", value: "on")
-                                if (aux2[1] == "1")
-                                    runIn(5, "poll", [overwrite: true])
-                            } else {
-                                childDevice?.sendEvent(name: "switch", value: "off")
-                                if (aux2[1] == "3")
-                                    runIn(5, "poll", [overwrite: true])
-                            }
-                        }
-                    }
-                }
-                return "Poll completed $map - $state.hubs"
-            }
-        } catch (groovyx.net.http.HttpResponseException e) {
-              if (e.statusCode == 401) { // token is expired
-                  state.remove("HarmonyAccessToken")
-                  log.warn "Harmony Access token has expired"
-              }
-        } catch (java.net.SocketTimeoutException e) {
-        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
-              state.resethub = true
-        } catch (e) {
-        	log.info "Logitech Harmony - Error: $e"
-        }
-    }
+        def tokenParam = [auth: state.HarmonyAccessToken]
+        def params = [
+            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
+            headers: ["Accept": "application/json"],
+            contentType: 'application/json'
+        ]
+        asynchttp_v1.get('pollResponse', params)
+      } else {
+        log.warn "Logitech Harmony - Access token has expired"
+      }
 }
 
-
-def getActivityList() {
-	// GET ACTIVITY'S NAME
-    if (state.HarmonyAccessToken) {
-        def Params = [auth: state.HarmonyAccessToken]
-        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-        try {
-            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-                response.data.hubs.each {
-                    def hub = getChildDevice("harmony-${it.key}")
-                    if (hub) {
-                    	def hubname = getHubName("${it.key}")
-                        def activities = []
-                        def aux = it.value.response.data.activities.size()
-                        if (aux >= 1) {
-                            activities = it.value.response.data.activities.collect {
-                                [id: it.key, name: it.value['name'], type: it.value['type']]
-                            }
-                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                            log.trace activities
-                        }
-                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-					}
+def pollResponse(response, data) {
+	if (response.hasError()) {
+    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    if (response.status == 401) { // token is expired
+      state.remove("HarmonyAccessToken")
+      log.warn "Logitech Harmony - Access token has expired"
+    }
+	} else {
+			def ResponseValues
+			try {
+					// json response already parsed into JSONElement object
+					ResponseValues = response.json
+			} catch (e) {
+					log.error "Logitech Harmony - error parsing json from response: $e"
+			}
+			if (ResponseValues) {
+        def map = [:]
+        ResponseValues.hubs.each {
+        if (it.value.message == "OK") {
+              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+              def hub = getChildDevice("harmony-${it.key}")
+              if (hub) {
+                  if (it.value.response.data.currentAvActivity == "-1") {
+                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                  } else {
+                      def currentActivity
+                      def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
+                      if (activityDTH)
+                        currentActivity = activityDTH.device.displayName
+                      else
+                        currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
+                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                  }
+              }
+          } else {
+            log.trace "Logitech Harmony - error response: $it.value.message"
+          }
+        }
+        def activities = getChildDevices()
+        def activitynotrunning = true
+        activities.each { activity ->
+            def act = activity.deviceNetworkId.split('-')
+            if (act.size() > 2) {
+                def aux = map.find { it.key == act[1] }
+                if (aux) {
+                    def aux2 = aux.value.split(',')
+                    def childDevice = getChildDevice(activity.deviceNetworkId)
+                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
+                        childDevice?.sendEvent(name: "switch", value: "on")
+                        if (aux2[1] == "1")
+                            runIn(5, "poll", [overwrite: true])
+                    } else {
+                        childDevice?.sendEvent(name: "switch", value: "off")
+                        if (aux2[1] == "3")
+                            runIn(5, "poll", [overwrite: true])
+                    }
                 }
             }
-        } catch (groovyx.net.http.HttpResponseException e) {
-        	log.trace e
-        } catch (java.net.SocketTimeoutException e) {
-        	log.trace e
-		} catch(Exception e) {
-        	log.trace e
-		}
-    }
-	return activity
+        }
+			} else {
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+			}
+	}
 }
 
 def getActivityName(activity,hubId) {
@@ -746,7 +728,7 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "addSubscription, params: ${params}, request: ${data}"
+	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
@@ -808,6 +790,7 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
+      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,17 +26,22 @@ definition(
 )
 
 preferences {
-	section ("In addition to push notifications, send text alerts to...") {
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone1", "phone", title: "Phone Number 1", required: false
-            input "phone2", "phone", title: "Phone Number 2", required: false
-            input "phone3", "phone", title: "Phone Number 3", required: false
-        }
+
+  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
 	}
 
-	section ("Zip code (optional, defaults to location coordinates)...") {
-		input "zipcode", "text", title: "Zip Code", required: false
-	}
+  if (location.channelName != 'samsungtv') {
+		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  }
+
+	section ("In addition to push notifications, send text alerts to...") {
+      input("recipients", "contact", title: "Send notifications to") {
+          input "phone1", "phone", title: "Phone Number 1", required: false
+          input "phone2", "phone", title: "Phone Number 2", required: false
+          input "phone3", "phone", title: "Phone Number 3", required: false
+      }
+	 }
 }
 
 def installed() {
@@ -61,7 +66,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipcode)?.alerts
+			alerts = getWeatherFeature("alerts", zipCode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts