Merge pull request #1302 from SmartThingsCommunity/staging

Rolling up staging for production deployment

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,27 +87,16 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
-	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 	]
 }
 

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,21 +105,11 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	[
+	'zcl on-off on'
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
 }
 
 def off() {
-	[
+	'zcl on-off off'
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
 }
 
 def setLevel(value) {

devicetypes/smartthings/cree-bulb.src/README.md

@@ -23,8 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
+A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
-Check-in interval = 12 mins
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*10 = 20 min
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,21 +47,9 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	[
+	'zcl on-off on'
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-
-	]
-
 }
 
 def off() {
-	[
+	'zcl on-off off'
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
 }

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C1 smart power outlet with maxReportTime of 5 mins.
+A Category C1 smart power outlet with maxReportTime of 10 min.
-Check-in interval is double the value of maxReportTime. 
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*10 = 20 min
 
 ## Troubleshooting
 

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 moisture sensor with maxReportTime of 5 mins.
+A Category C2 moisture sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime. 
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -180,9 +180,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -22,10 +22,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 5 mins.
+A Category C2 motion sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -194,9 +194,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -26,10 +26,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 multi sensor with maxReportTime of 5 mins.
+A Category C2 multi sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime. 
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -261,9 +261,9 @@ def updated() {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 		} else {
-			return celsiusToFahrenheit(celsius) as Integer
+			return Math.round(celsiusToFahrenheit(celsius))
 		}
 	}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 open/closed sensor with maxReportTime of 5 mins.
+A Category C2 open/closed sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime. 
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
-Check-in interval is double the value of maxReportTime. 
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/zigbee-dimmer.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,36 +0,0 @@
-# OSRAM Lightify LED On/Off/Dim
-
-
-
-Works with: 
-
-* [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,8 +31,7 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+    }
-	}
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){

devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -1,42 +0,0 @@
-# OSRAM LIGHTIFY LED RGBW Bulb
-
-
-
-Works with: 
-
-* [OSRAM LIGHTIFY LED RGBW Bulb](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Actuator** - It represents that a device has commands.
-* **Color Control** - It represents that the color attributes of a device can be controlled (hue, saturation, color value).
-* **Color Temperature** - It represents color temperature capability measured in degree Kelvin.
-* **Polling** - It represents that a device can be polled.
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - can detect current light level (0-100 in percent)
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-It may also happen that you need to reset the device.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,37 +0,0 @@
-# OSRAM Lightify Tunable 60 White
-
-
-
-Works with: 
-
-* [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Color Temperature** - represents color temperature, measured in degrees Kelvin.
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated.
-* **Refresh** - _refresh()_ command for status updates
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Temperature"

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- *
+ * 
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,18 +21,13 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
-	}
-
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -44,11 +39,9 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-
+	section( "Set your location" ) {
-	if (location.channelName != 'samsungtv') {
+		input "zipCode", "text", title: "Zip code"
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+	}
-  }
-
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -79,7 +72,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-
+	
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -105,7 +98,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -132,11 +125,7 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json 
+	def json = getWeatherFeature("conditions", zipCode)
-	if (location.channelName != 'samsungtv')
-		json = getWeatherFeature("conditions", zipCode)
-	else
-		json = getWeatherFeature("conditions")
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -161,4 +150,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -1,253 +0,0 @@
-/**
- *  Gideon
- *
- *  Copyright 2016 Nicola Russo
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gideon",
-    namespace: "gideon.api",
-    author: "Braindrain Solutions",
-    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
-    category: "Family",
-    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
-
-
-preferences {
-	section("Control these switches...") {
-        input "switches", "capability.switch", multiple:true
-    }
-    section("Control these motion sensors...") {
-        input "motions", "capability.motionSensor", multiple:true
-    }
-    section("Control these presence sensors...") {
-    	input "presence_sensors", "capability.presenceSensor", multiple:true
-    }
-    section("Control these outlets...") {
-    	input "outlets", "capability.switch", multiple:true
-    }
-    section("Control these locks...") {
-    	input "locks", "capability.lock", multiple:true
-    }
-    section("Control these locks...") {
-	    input "temperature_sensors", "capability.temperatureMeasurement"
-    }
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-    subscribe(outlet, "energy", outletHandler)
-  	subscribe(outlet, "switch", outletHandler)
-}
-
-// TODO: implement event handlers
-def outletHandler(evt) {
-	log.debug "$outlet.currentEnergy"
-	//TODO call G API  
-}
-
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}
-
-//API Mapping
-mappings {
-	path("/getalldevices") {
-    action: [
-      			GET: "getAllDevices"
-    		]
-  	}
-	path("/doorlocks/:id/:command") {
-    action: [
-      GET: "updateDoorLock"
-    ]
-  }
-  	path("/doorlocks/:id") {
-    action: [
-      			GET: "getDoorLockStatus"
-    		]
-  	}
-  	path("/tempsensors/:id") {
-    action: [
-      GET: "getTempSensorsStatus"
-    ]
-  }
-  	path("/presences/:id") {
-    action: [
-      GET: "getPresenceStatus"
-    ]
-  }
-  	path("/motions/:id") {
-    action: [
-      GET: "getMotionStatus"
-    ]
-  }
-  	path("/outlets/:id") {
-    action: [
-      GET: "getOutletStatus"
-    ]
-  }
-  	path("/outlets/:id/:command") {
-    action: [
-      GET: "updateOutlet"
-    ]
-  }
-  	path("/switches/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-}
-
-//API Methods
-def getAllDevices() {
-	def locks_list = locks.collect{device(it,"Lock")}
-    def presences_list = presence_sensors.collect{device(it,"Presence")}
-    def motions_list = motions.collect{device(it,"Motion")}
-    def outlets_list = outlets.collect{device(it,"Outlet")}
-    def switches_list = switches.collect{device(it,"Switch")}
-    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
-    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
-}
-
-//LOCKS
-def getDoorLockStatus() {
-	def device = locks.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('lock')]
-        }
-}
-
-def updateDoorLock() {
-	def command = params.command
-    def device = locks.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentValue('lock') == "locked")
-                  device.unlock();
-                else
-                  device.lock();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}
-
-//PRESENCE
-def getPresenceStatus() {
-
-	def device = presence_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('presence')]
-   }
-}
-
-//MOTION
-def getMotionStatus() {
-
-	def device = motions.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('motion')]
-   }
-}
-
-//OUTLET
-def getOutletStatus() {
-	
-    def device = outlets.find { it.id == params.id }
-   	if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
-  }
-}
-
-def updateOutlet() {
-	
-    def command = params.command
-    def device = outlets.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentSwitch == "on")
-                  device.off();
-                else
-                  device.on();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}                
-
-//SWITCH
-def updateSwitch() {
-    def command = params.command
-    def device = switches.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentSwitch == "on")
-                  device.off();
-                else
-                  device.on();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}
-
-//TEMPERATURE
-def getTempSensorsStatus() {
-	
-    def device = temperature_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('temperature')]
-   }
-}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,13 +18,8 @@ definition(
 )
 
 preferences {
-
+  section("Zip code?") {
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+    input "zipcode", "text", title: "Zipcode?"
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
-	}
-
-  if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
   }
 
   section("Things to check?") {
@@ -65,11 +60,7 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response
+    def response = getWeatherFeature("forecast", zipcode)
-    if (location.channelName != 'samsungtv')
-      response = getWeatherFeature("forecast", zipCode)
-    else
-      response = getWeatherFeature("forecast")
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,9 +4,6 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
-
-include 'asynchttp_v1'
-
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -306,8 +303,7 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        childDevice?.generateSleepingEvent(false)
+			        generateInitialEvent (member, childDevice)
-                    pollChild(childDevice)
 			    }
 			}
 		}
@@ -353,67 +349,67 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
+    def member = state.member
-
+    generatePollingEvents (member, childDevice)
-		def params = [
-				uri: 'https://jawbone.com',
-				path: '/nudge/api/users/@me/goals',
-				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
-				contentType: 'application/json'
-		]
-
-		asynchttp_v1.get('responseGoals', params, childMap)
-
-		def params2 = [
-				uri: 'https://jawbone.com',
-				path: '/nudge/api/users/@me/moves',
-				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
-				contentType: 'application/json'
-		]
-
-		asynchttp_v1.get('responseMoves', params2, childMap)
 }
 
-def responseGoals(response, dni) {
+def generatePollingEvents (member, childDevice) {
-	if (response.hasError()) {
+    // lets figure out if the member is currently "home" (At the place)
-			log.error "response has error: $response.errorMessage"
+    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
-	} else {
+    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
-			def goals
+    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
-			try {
+    def goals = null
-					// json response already parsed into JSONElement object
+    def moves = null
-					goals = response.json.data
+ 	def sleeps = null
-			} catch (e) {
+    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-					log.error "error parsing json from response: $e"
+        goals = response.data.data
-			}
+    }
-			if (goals) {
+    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-				def childDevice = getChildDevice(dni.value)
+        moves = response.data.data.items[0]
-				log.debug "Goal = ${goals.move_steps} Steps"
+    }
-				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+
-			} else {
+    try { // we are going to just ignore any errors
-					log.debug "did not get json results from response body: $response.data"
+        log.debug "Member = ${member.first}"
-			}
+        log.debug "Moves Goal = ${goals.move_steps} Steps"
-	}
+        log.debug "Moves = ${moves.details.steps} Steps"
+
+        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+    	//setColor(moves.details.steps,goals.move_steps,childDevice)
+    }
+    catch (e) {
+            // eat it
+    }
 }
 
-def responseMoves(response, dni) {
+def generateInitialEvent (member, childDevice) {
-	if (response.hasError()) {
+    // lets figure out if the member is currently "home" (At the place)
-			log.error "response has error: $response.errorMessage"
+    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
-	} else {
+    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
-			def moves
+    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
-			try {
+    def goals = null
-					// json response already parsed into JSONElement object
+    def moves = null
-					moves = response.json.data.items[0]
+ 	def sleeps = null
-			} catch (e) {
+    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-					log.error "error parsing json from response: $e"
+        goals = response.data.data
-			}
+    }
-			if (moves) {
+    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
-				def childDevice = getChildDevice(dni.value)
+        moves = response.data.data.items[0]
-				log.debug "Moves = ${moves.details.steps} Steps"
+    }
-				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+
-			} else {
+    try { // we are going to just ignore any errors
-					log.debug "did not get json results from response body: $response.data"
+        log.debug "Member = ${member.first}"
-			}
+        log.debug "Moves Goal = ${goals.move_steps} Steps"
-	}
+        log.debug "Moves = ${moves.details.steps} Steps"
+        log.debug "Sleeping state = false"
+        childDevice?.generateSleepingEvent(false)
+        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+    	//setColor(moves.details.steps,goals.move_steps,childDevice)
+    }
+    catch (e) {
+            // eat it
+    }
 }
 
 def setColor (steps,goal,childDevice) {
@@ -437,7 +433,7 @@ def hookEventHandler() {
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	  def json_action = json.events.action[0]
+	def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,23 +454,17 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
-	// send 100% completion event
-	sendTimeRemainingEvent(100)
-
-	// send a non-displayed 0% completion to reset tiles
-	sendTimeRemainingEvent(0, false)
-
-	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
+	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete, displayed = true) {
+def sendTimeRemainingEvent(percentComplete) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -480,7 +474,7 @@ def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -614,6 +608,8 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
+
+	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -83,7 +83,7 @@ def bridgeDiscovery(params=[:])
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
 		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options
+			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
 }
@@ -333,9 +333,9 @@ def bulbListHandler(hub, data = "") {
     def bridge = null
 	if (selectedHue) {
 		bridge = getChildDevice(selectedHue)
+		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
 	}
-    bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
+	msg = "${bulbs.size()} bulbs found. ${bulbs}"
-    msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
 }
 
@@ -490,24 +490,25 @@ def ssdpBridgeHandler(evt) {
 		def host = ip + ":" + port
 		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
 		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
-		def dni = "${parsedEvent.mac}"
+		def dniReceived = "${parsedEvent.mac}"
-		def d = getChildDevice(dni)
+		def currentDni = dstate.mac
+		def d = getChildDevice(dniReceived)
 		def networkAddress = null
 		if (!d) {
-			childDevices.each {
+			// There might be a mismatch between bridge DNI and the actual bridge mac address, correct that
-				if (it.getDeviceDataByName("mac")) {
+			log.debug "Bridge with $dniReceived not found"
-					def newDNI = "${it.getDeviceDataByName("mac")}"
+			def bridge = childDevices.find { it.deviceNetworkId == currentDni }
-					d = it
+			if (bridge != null) {
-					if (newDNI != it.deviceNetworkId) {
+				log.warn "Bridge is set to ${bridge.deviceNetworkId}, updating to $dniReceived"
-						def oldDNI = it.deviceNetworkId
+				bridge.setDeviceNetworkId("${dniReceived}")
-						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
+				dstate.mac = dniReceived
-						it.setDeviceNetworkId("${newDNI}")
+				// Check to see if selectedHue is a valid bridge, otherwise update it
-						if (oldDNI == selectedHue) {
+				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
-							app.updateSetting("selectedHue", newDNI)
+				if (isSelectedValid == null) {
-						}
+					log.warn "Correcting selectedHue in state"
-						doDeviceSync()
+					app.updateSetting("selectedHue", dniReceived)
-					}
 				}
+				doDeviceSync()
 			}
 		} else {
 			updateBridgeStatus(d)
@@ -525,6 +526,18 @@ def ssdpBridgeHandler(evt) {
 				d.sendEvent(name:"networkAddress", value: host)
 				d.updateDataValue("networkAddress", host)
 			}
+			if (dstate.mac != dniReceived) {
+				log.warn "Correcting bridge mac address in state"
+				dstate.mac = dniReceived
+			}
+			if (selectedHue != dniReceived) {
+				// Check to see if selectedHue is a valid bridge, otherwise update it
+				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				if (isSelectedValid == null) {
+					log.warn "Correcting selectedHue in state"
+					app.updateSetting("selectedHue", dniReceived)
+				}
+			}
 		}
 	}
 }
@@ -950,6 +963,14 @@ private handleCommandResponse(body) {
  * @return empty array
  */
 private handlePoll(body) {
+	// Used to track "unreachable" time
+	// Device is considered "offline" if it has been in the "unreachable" state for
+	// 11 minutes (e.g. two poll intervals)
+	// Note, Hue Bridge marks devices as "unreachable" often even when they accept commands
+	Calendar time11 = Calendar.getInstance()
+	time11.add(Calendar.MINUTE, -11)
+	Calendar currentTime = Calendar.getInstance()
+
 	def bulbs = getChildDevices()
 	for (bulb in body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
@@ -959,7 +980,10 @@ private handlePoll(body) {
 					// light just came back online, notify device watch
 					def lastActivity = now()
 					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+					log.debug "$device is Online"
 				}
+				// Mark light as "online"
+				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
 
 				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
@@ -969,9 +993,18 @@ private handlePoll(body) {
 					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
 				}
 			} else {
-				state.bulbs[bulb.key]?.online = false
+				if (state.bulbs[bulb.key]?.unreachableSince == null) {
-				log.warn "$device is not reachable by Hue bridge"
+					// Store the first time where device was reported as "unreachable"
-				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
+				} else if (state.bulbs[bulb.key]?.online) {
+					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
+						log.warn "$device went Offline"
+						state.bulbs[bulb.key]?.online = false
+						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+					}
+				}
+				log.warn "$device may not reachable by Hue bridge"
 			}
 		}
 	}
@@ -1006,9 +1039,6 @@ def hubVerification(bodytext) {
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
@@ -1018,9 +1048,6 @@ def on(childDevice) {
 def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
@@ -1030,9 +1057,6 @@ def off(childDevice) {
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 1 - 254
     def level
@@ -1057,10 +1081,6 @@ def setLevel(childDevice, percent) {
 def setSaturation(childDevice, percent) {
 	log.debug "Executing 'setSaturation($percent)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
-
 	updateInProgress()
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
@@ -1073,9 +1093,6 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
@@ -1088,9 +1105,6 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
@@ -1102,9 +1116,6 @@ def setColorTemperature(childDevice, huesettings) {
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 
     def value = [:]
@@ -1120,7 +1131,7 @@ def setColor(childDevice, huesettings) {
 			value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
 		if (huesettings.saturation != null)
 			value.sat = Math.min(Math.round(huesettings.saturation * 254 / 100), 254)
-	} else if (huesettings.hex != null && false) {
+	} else if (huesettings.hex != null) {
 		// For now ignore model to get a consistent color if same color is set across multiple devices
 		// def model = state.bulbs[getId(childDevice)]?.modelid
 		// value.xy = calculateXY(huesettings.hex, model)
@@ -1224,7 +1235,7 @@ private getBridgeIP() {
     	if (d) {
         	if (d.getDeviceDataByName("networkAddress"))
             	host =  d.getDeviceDataByName("networkAddress")
-            else
+        else
         		host = d.latestState('networkAddress').stringValue
         }
         if (host == null || host == "") {
@@ -1663,7 +1674,7 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 }
 
 /**
- * Converts an RGB color in hex to HSV.
+ * Converts an RGB color in hex to HSV/HSB.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param colorStr color value in hex (#ff03d3)
@@ -1673,32 +1684,32 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 def hexToHsv(colorStr){
 	def r = Integer.valueOf( colorStr.substring( 1, 3 ), 16 ) / 255
 	def g = Integer.valueOf( colorStr.substring( 3, 5 ), 16 ) / 255
-	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255;
+	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255
 
 	def max = Math.max(Math.max(r, g), b)
 	def min = Math.min(Math.min(r, g), b)
 
-	def h, s, v = max;
+	def h, s, v = max
 
-	def d = max - min;
+	def d = max - min
-	s = max == 0 ? 0 : d / max;
+	s = max == 0 ? 0 : d / max
 
 	if(max == min){
-		h = 0;
+		h = 0
 	}else{
 		switch(max){
-			case r: h = (g - b) / d + (g < b ? 6 : 0); break;
+			case r: h = (g - b) / d + (g < b ? 6 : 0); break
-			case g: h = (b - r) / d + 2; break;
+			case g: h = (b - r) / d + 2; break
-			case b: h = (r - g) / d + 4; break;
+			case b: h = (r - g) / d + 4; break
 		}
 		h /= 6;
 	}
 
-	return [(h * 100).round(), (s * 100).round(), (v * 100).round()];
+	return [Math.round(h * 100), Math.round(s * 100), Math.round(v * 100)]
 }
 
 /**
- * Converts HSV color to RGB in hex.
+ * Converts HSV/HSB color to RGB in hex.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param  hue hue 0-100
@@ -1713,11 +1724,11 @@ def hsvToHex(hue, sat, value = 100){
 	def s = sat / 100
 	def v = value / 100
 
-	def i = Math.floor(h * 6);
+	def i = Math.floor(h * 6)
-	def f = h * 6 - i;
+	def f = h * 6 - i
-	def p = v * (1 - s);
+	def p = v * (1 - s)
-	def q = v * (1 - f * s);
+	def q = v * (1 - f * s)
-	def t = v * (1 - (1 - f) * s);
+	def t = v * (1 - (1 - f) * s)
 
 	switch (i % 6) {
 		case 0:
@@ -1753,9 +1764,9 @@ def hsvToHex(hue, sat, value = 100){
 	}
 
 	// Converting float components to int components.
-	def r1 = String.format("%02X", (int) (r * 255.0f));
+	def r1 = String.format("%02X", (int) (r * 255.0f))
-	def g1 = String.format("%02X", (int) (g * 255.0f));
+	def g1 = String.format("%02X", (int) (g * 255.0f))
-	def b1 = String.format("%02X", (int) (b * 255.0f));
+	def b1 = String.format("%02X", (int) (b * 255.0f))
 
 	return "#$r1$g1$b1"
 }

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,7 +34,6 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
-include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -110,28 +109,26 @@ def authPage() {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 5
+		def refreshInterval = 3
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-    def numFoundAct = actoptions.size() ?: 0
+        def numFoundAct = actoptions.size() ?: 0
-
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
-
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-      // Virtual activity flag
+            // Virtual activity flag
-      if (numFoundHub > 0 && numFoundAct > 0 && true)
+            if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
 			}
-    if (state.resethub)
+            if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -383,6 +380,8 @@ def discovery() {
             	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
+                getActivityList()
+                poll()
 	        } else {
             	log.debug "Error: $response.status"
             }
@@ -431,182 +430,142 @@ def addDevice() {
 }
 
 def activity(dni,mode) {
-    def tokenParam = [auth: state.HarmonyAccessToken]
+    def Params = [auth: state.HarmonyAccessToken]
-    def url
+    def msg = "Command failed"
+    def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
         } else {
-          def activityId = aux[2]
+            def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
 	}
-  def params = [
+	try {
-      uri: url,
+    	httpPostJson(uri: url) { response ->
-      contentType: 'application/json'
+        	if (response.data.code == 200 || dni == "all") {
-  ]
+            	msg = "Command sent succesfully"
-  asynchttp_v1.post('activityResponse', params)
+            	state.aux = 0
-  return "Command Sent"
+            } else {
-}
+            	msg = "Command failed. Error: $response.data.code"
-
+            }
-def activityResponse(response, data) {
+		}
-  if (response.hasError()) {
+    } catch (groovyx.net.http.HttpResponseException ex) {
-    log.error "Logitech Harmony - response has error: $response.errorMessage"
+        log.error ex
-    if (response.status == 401) { // token is expired
+        if (state.aux == 0) {
-      state.remove("HarmonyAccessToken")
+        	state.aux = 1
-      log.warn "Logitech Harmony - Access token has expired"
+        	activity(dni,mode)
+        } else {
+        	msg = ex
+            state.aux = 0
+        }
+    } catch(Exception ex) {
+    	msg = ex
     }
-  } else {
+    runIn(10, "poll", [overwrite: true])
-    def ResponseValues
+    return msg
-    try {
-      // json response already parsed into JSONElement object
-      ResponseValues = response.json
-    } catch (e) {
-      log.error "Logitech Harmony - error parsing json from response: $e"
-    }
-    if (ResponseValues) {
-      if (ResponseValues.code == 200) {
-        log.trace "Command sent succesfully"
-        poll()
-      } else {
-        log.trace "Command failed. Error: $response.data.code"
-      }
-    } else {
-      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
-    }
-  }
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	  getActivityList()
-        def tokenParam = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]
-        def params = [
+        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
-            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
+        try {
-            headers: ["Accept": "application/json"],
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-            contentType: 'application/json'
+                def map = [:]
-        ]
+                response.data.hubs.each {
-        asynchttp_v1.get('pollResponse', params)
+		            if (it.value.message == "OK") {
-      } else {
+	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-          log.warn "Logitech Harmony - Access token has expired"
+	                    def hub = getChildDevice("harmony-${it.key}")
-      }
+	                    if (hub) {
-}
+	                        if (it.value.response.data.currentAvActivity == "-1") {
-
+	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
-def pollResponse(response, data) {
+	                        } else {
-	if (response.hasError()) {
+	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-    log.error "Logitech Harmony - response has error: $response.errorMessage"
+	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
-    if (response.status == 401) { // token is expired
+	                        }
-      state.remove("HarmonyAccessToken")
+	                    }
-      log.warn "Logitech Harmony - Access token has expired"
+	                } else {
-    }
+		                log.trace it.value.message
-	} else {
+	                }
-			def ResponseValues
+                }
-			try {
+                def activities = getChildDevices()
-					// json response already parsed into JSONElement object
+                def activitynotrunning = true
-					ResponseValues = response.json
+                activities.each { activity ->
-			} catch (e) {
+                    def act = activity.deviceNetworkId.split('-')
-					log.error "Logitech Harmony - error parsing json from response: $e"
+                    if (act.size() > 2) {
-			}
+                        def aux = map.find { it.key == act[1] }
-			if (ResponseValues) {
+                        if (aux) {
-        def map = [:]
+                            def aux2 = aux.value.split(',')
-        ResponseValues.hubs.each {
+                            def childDevice = getChildDevice(activity.deviceNetworkId)
-        if (it.value.message == "OK") {
+                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+                                childDevice?.sendEvent(name: "switch", value: "on")
-              def hub = getChildDevice("harmony-${it.key}")
+                                if (aux2[1] == "1")
-              if (hub) {
+                                    runIn(5, "poll", [overwrite: true])
-                  if (it.value.response.data.currentAvActivity == "-1") {
+                            } else {
-                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                                childDevice?.sendEvent(name: "switch", value: "off")
-                  } else {
+                                if (aux2[1] == "3")
-                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
+                                    runIn(5, "poll", [overwrite: true])
-                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                            }
-                  }
+                        }
-              }
-          } else {
-            log.trace "Logitech Harmony - error response: $it.value.message"
-          }
-        }
-        def activities = getChildDevices()
-        def activitynotrunning = true
-        activities.each { activity ->
-            def act = activity.deviceNetworkId.split('-')
-            if (act.size() > 2) {
-                def aux = map.find { it.key == act[1] }
-                if (aux) {
-                    def aux2 = aux.value.split(',')
-                    def childDevice = getChildDevice(activity.deviceNetworkId)
-                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                        childDevice?.sendEvent(name: "switch", value: "on")
-                        if (aux2[1] == "1")
-                            runIn(5, "poll", [overwrite: true])
-                    } else {
-                        childDevice?.sendEvent(name: "switch", value: "off")
-                        if (aux2[1] == "3")
-                            runIn(5, "poll", [overwrite: true])
                     }
                 }
+                return "Poll completed $map - $state.hubs"
             }
+        } catch (groovyx.net.http.HttpResponseException e) {
+              if (e.statusCode == 401) { // token is expired
+                  state.remove("HarmonyAccessToken")
+                  log.warn "Harmony Access token has expired"
+              }
+        } catch (java.net.SocketTimeoutException e) {
+        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
+              state.resethub = true
+        } catch (e) {
+        	log.info "Logitech Harmony - Error: $e"
         }
-			} else {
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
-			}
-	}
-}
-
-def getActivityList() {
-    if (state.HarmonyAccessToken) {
-      def tokenParam = [auth: state.HarmonyAccessToken]
-      def params = [
-  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
-  				headers: ["Accept": "application/json"],
-  				contentType: 'application/json'
-  		]
-  		asynchttp_v1.get('activityListResponse', params)
-    } else {
-        log.warn "Logitech Harmony - Access token has expired"
     }
 }
 
-def activityListResponse(response, data) {
+
-	if (response.hasError()) {
+def getActivityList() {
-			log.error "Logitech Harmony - response has error: $response.errorMessage"
+	// GET ACTIVITY'S NAME
-      if (response.status == 401) { // token is expired
+    if (state.HarmonyAccessToken) {
-          state.remove("HarmonyAccessToken")
+        def Params = [auth: state.HarmonyAccessToken]
-          log.warn "Logitech Harmony - Access token has expired"
+        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-      }
+        try {
-	} else {
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-			def ResponseValues
+                response.data.hubs.each {
-			try {
+                    def hub = getChildDevice("harmony-${it.key}")
-					// json response already parsed into JSONElement object
+                    if (hub) {
-					ResponseValues = response.json
+                    	def hubname = getHubName("${it.key}")
-			} catch (e) {
+                        def activities = []
-					log.error "Logitech Harmony - error parsing json from response: $e"
+                        def aux = it.value.response.data.activities.size()
-			}
+                        if (aux >= 1) {
-			if (ResponseValues) {
+                            activities = it.value.response.data.activities.collect {
-          	  ResponseValues.hubs.each {
+                                [id: it.key, name: it.value['name'], type: it.value['type']]
-              def hub = getChildDevice("harmony-${it.key}")
+                            }
-              if (hub) {
+                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                def hubname = getHubName("${it.key}")
+                            log.trace activities
-                  def activities = []
+                        }
-                  def aux = it.value.response?.data.activities.size()
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-                  if (aux >= 1) {
+					}
-                      activities = it.value.response.data.activities.collect {
+                }
-                          [id: it.key, name: it.value['name'], type: it.value['type']]
+            }
-                      }
+        } catch (groovyx.net.http.HttpResponseException e) {
-                      activities += [id: "off", name: "Activity OFF", type: "0"]
+        	log.trace e
-                      log.trace activities
+        } catch (java.net.SocketTimeoutException e) {
-                  }
+        	log.trace e
-                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+		} catch(Exception e) {
-              }
+        	log.trace e
-          }
+		}
-			} else {
+    }
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+	return activity
-			}
-	}
 }
 
 def getActivityName(activity,hubId) {
@@ -787,7 +746,7 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
@@ -849,7 +808,6 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,22 +26,17 @@ definition(
 )
 
 preferences {
-
+	section ("In addition to push notifications, send text alerts to...") {
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
+        input("recipients", "contact", title: "Send notifications to") {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+            input "phone1", "phone", title: "Phone Number 1", required: false
+            input "phone2", "phone", title: "Phone Number 2", required: false
+            input "phone3", "phone", title: "Phone Number 3", required: false
+        }
 	}
 
-  if (location.channelName != 'samsungtv') {
+	section ("Zip code (optional, defaults to location coordinates)...") {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+		input "zipcode", "text", title: "Zip Code", required: false
-  }
+	}
-
-	section ("In addition to push notifications, send text alerts to...") {
-      input("recipients", "contact", title: "Send notifications to") {
-          input "phone1", "phone", title: "Phone Number 1", required: false
-          input "phone2", "phone", title: "Phone Number 2", required: false
-          input "phone3", "phone", title: "Phone Number 3", required: false
-      }
-	 }
 }
 
 def installed() {
@@ -66,7 +61,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipCode)?.alerts
+			alerts = getWeatherFeature("alerts", zipcode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts