Merge pull request #1302 from SmartThingsCommunity/staging

Rolling up staging for production deployment

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -127,10 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 	def map = [ displayed: true ]
     switch (cmd.sensorType) {
     	case 1:
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.name = "temperature"
-            map.unit = getTemperatureScale()
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        	map.name = "temperature"
+            map.unit = cmd.scale == 1 ? "F" : "C"
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
             break
     	case 3:
         	map.name = "illuminance"

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,27 +87,16 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
-	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
 	]
 }
 

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,21 +105,11 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	[
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
+	'zcl on-off on'
 }
 
 def off() {
-	[
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
+	'zcl on-off off'
 }
 
 def setLevel(value) {

devicetypes/smartthings/cree-bulb.src/README.md

@@ -23,8 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
-Check-in interval = 12 mins
+A Category C6 Connected Cree LED Bulb with maxReportTime of 10 min.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 2*10 = 20 min
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -93,19 +93,20 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def healthPoll() {
-    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    runEvery5Minutes("healthPoll")
+    schedule("0 0/5 * * * ? *", "healthPoll")
+    log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    zigbee.onOffRefresh() + zigbee.levelRefresh()
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
-		attribute "thermostatStatus", "string"
+		attribute "thermostatSetpoint","number"
+		attribute "thermostatStatus","string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "string"
+		attribute "deviceTemperatureUnit", "number"
 	}
 
 	tiles {
@@ -655,60 +655,55 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	if (mode == "off" || mode == "auto") {
-		log.warn "this mode: $mode does not allow alterSetpoint"
-	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint")
-		def coolingSetpoint = device.currentValue("coolingSetpoint")
-		def deviceId = device.deviceNetworkId.split(/\./).last()
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
 
-		def targetHeatingSetpoint
-		def targetCoolingSetpoint
-
-		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
-			if (temp.value > coolingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = coolingSetpoint
-			}
-		} else if (mode == "cool") {
-			//enforce limits before sending request to cloud
-			if (temp.value < heatingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = heatingSetpoint
-				targetCoolingSetpoint = temp.value
-			}
-		}
-
-		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat" || mode == "auxHeatOnly"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
 		} else {
-			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
-				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-			} else if (mode == "cool") {
-				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
-			}
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
+		}
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
 		}
-		generateStatusEvent()
 	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat" || mode == "auxHeatOnly"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,11 +7,9 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Health Check"
-
 		attribute "networkAddress", "string"
-		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-		// Possible values "Online" or "Offline"
+        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+        // Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -44,10 +42,6 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -76,8 +70,13 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
+					} else {
+						// Sending Bulbs List to parent"
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				} else if (contentType?.contains("xml")) {
+				}
+				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -86,7 +85,3 @@ def parse(description) {
 	}
 	results
 }
-
-def ping() {
-	log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -174,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent?.manualRefresh()
+    parent.manualRefresh()
 }
 
 def verifyPercent(percent) {

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -1,37 +0,0 @@
-# Nyce Door/Window Sensor (Open/Close Sensor)
-
-
-
-Works with:
-
-* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (with possible values - open/closed)
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 Nyce Door/Window sensor that has 12min check-in interval
-
-## Battery Specification
-
-One 3V CR2032 battery required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
-* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,26 +19,25 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-		capability "Battery"
+    	capability "Battery"
 		capability "Configuration"
-		capability "Contact Sensor"
+        capability "Contact Sensor"
 		capability "Refresh"
-		capability "Health Check"
-
-		command "enrollResponse"
-
-
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+        
+        command "enrollResponse"
+ 
+ 
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
-
+ 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -274,28 +273,23 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def enrollCmds = [
+	def configCmds = [
+			//battery reporting and heartbeat
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
+
+
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return configCmds
 }
 
 def enrollResponse() {
@@ -340,8 +334,7 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	def refreshCmds = [
+	[
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
-	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -21,6 +21,9 @@ metadata {
         attribute "colorName", "string"
 
         command "setAdjustedColor"
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
     }
 
     // simulator metadata

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -133,7 +133,7 @@ def refresh() {
 }
 
 def configure() {
-	refresh() + onOffConfig() + levelConfig() + powerConfig()
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
 }
 
 

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,21 +47,9 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	[
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-
-	]
-
+	'zcl on-off on'
 }
 
 def off() {
-	[
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
+	'zcl on-off off'
 }

devicetypes/smartthings/smartpower-outlet.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C1 smart power outlet with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Category C1 smart power outlet with maxReportTime of 10 min.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*10 = 20 min
 
 ## Troubleshooting
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -16,7 +16,7 @@
 
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -104,21 +104,8 @@ def parse(String description) {
 		}
 	}
 	else {
-		def cluster = zigbee.parse(description)
-
-		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
-			if (cluster.data[0] == 0x00) {
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.warn "DID NOT PARSE MESSAGE for description : $description"
-			log.debug "${cluster}"
-		}
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
 	}
 }
 
@@ -141,12 +128,10 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
+	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/README.md

@@ -23,10 +23,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 moisture sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Category C2 moisture sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -118,28 +118,14 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -149,8 +135,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -304,13 +292,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/README.md

@@ -22,10 +22,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 motion sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime.
+A Category C2 motion sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -122,37 +122,19 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+				resultMap = getBatteryResult(cluster.data.last())
 				break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
 				break
 
 			case 0x0406:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					log.debug 'motion'
-					resultMap.name = 'motion'
-				}
+				log.debug 'motion'
+				resultMap.name = 'motion'
 				break
 		}
 	}
@@ -162,8 +144,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -319,13 +303,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+	]
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -255,9 +255,13 @@ def refresh() {
 }
 
 def configure() {
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
 	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -266,7 +270,7 @@ def configure() {
 		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-    return refresh() + configCmds  // send refresh cmds as part of config
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-multi-sensor.src/README.md

@@ -26,10 +26,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 multi sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Category C2 multi sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -147,33 +147,20 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+			resultMap = getBatteryResult(cluster.data.last())
 			break
 
 			case 0xFC02:
-				log.debug 'ACCELERATION'
+			log.debug 'ACCELERATION'
 			break
 
 			case 0x0402:
-				if (cluster.command == 0x07) {
-					if(cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-			break
+			log.debug 'TEMP'
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
 		}
 	}
 
@@ -182,8 +169,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 	cluster.command == 0x0B ||
+	cluster.command == 0x07 ||
 	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -412,22 +401,22 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	def configCmds = zigbee.batteryConfig() +
+	def configCmds = enrollResponse() +
+			zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
-	return refresh() + configCmds
+	return configCmds + refresh()
 }
 
 private getEndpointId() {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -277,8 +277,12 @@ def getTemperature(value) {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
+
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -291,7 +295,7 @@ def configure() {
 		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return refresh() + configCmds // send refresh cmds as part of config
+	return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-open-closed-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 open/closed sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Category C2 open/closed sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -109,28 +109,15 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07){
-					if (cluster.data[0] == 0x00) {
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
                 break
         }
     }
@@ -140,8 +127,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -266,15 +255,19 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/README.md

@@ -24,10 +24,10 @@ Works with:
 
 ## Device Health
 
-A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Category C2 SmartSense Temp/Humidity Sensor with maxReportTime of 1 hr.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Check-in interval = 2*60 = 120 min
 
 ## Battery Specification
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -93,37 +93,20 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					resultMap = getBatteryResult(cluster.data.last())
-				}
+            	resultMap = getBatteryResult(cluster.data.last())
                 break
 
             case 0x0402:
-				if (cluster.command == 0x07) {
-					if (cluster.data[0] == 0x00){
-						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-					}
-					else {
-						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-					}
-				}
-				else {
-					// temp is last 2 data values. reverse to swap endian
-					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-					def value = getTemperature(temp)
-					resultMap = getTemperatureResult(value)
-				}
-				break
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0xFC45:
-				// 0x07 - configure reporting
-				if (cluster.command != 0x07) {
-					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-					resultMap = getHumidityResult(display)
-				}
+                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+                resultMap = getHumidityResult(display)
                 break
         }
     }
@@ -133,8 +116,10 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
+    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -250,7 +235,11 @@ private Map getTemperatureResult(value) {
 
 private Map getHumidityResult(value) {
 	log.debug 'Humidity'
-	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
+	return [
+		name: 'humidity',
+		value: value,
+		unit: '%'
+	]
 }
 
 /**
@@ -263,16 +252,20 @@ def ping() {
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
-	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
-			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +  // New firmware
-			zigbee.readAttribute(0x0402, 0x0000) +
-			zigbee.readAttribute(0x0001, 0x0020)
+	[
+
+		"zcl mfg-code 0xC2DF", "delay 1000",
+		"zcl global read 0xFC45 0", "delay 1000",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+
+	]
 }
 
 def configure() {
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
@@ -283,7 +276,7 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
+	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,42 +0,0 @@
-# Tyco Door Window Sensor
-
-
-
-Works with: 
-
-* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Battery** - defines device uses a battery
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (open/close)
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - can measure the device temperature
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Contact sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 min
-
-## Battery Specification
-
-3V CR2032 battery is required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
-Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
-It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -230,42 +229,44 @@ private Map getContactResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
-}
-
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = [
+	[
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
-
-	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
+        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
+
+        "delay 500"
 	]
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -89,8 +89,14 @@ def parse(String description) {
 }
 
 private Map parseIasButtonMessage(String description) {
-    def zs = zigbee.parseZoneStatus(description)
-    return zs.isAlarm2Set() ? getButtonResult("press") : getButtonResult("release")
+    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
+    if (zoneInt & 0x02) {
+        resultMap = getButtonResult('press')
+    } else {
+        resultMap = getButtonResult('release')
+    }
+
+    return resultMap
 }
 
 private Map getBatteryResult(rawValue) {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -93,5 +93,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,36 +0,0 @@
-# OSRAM Lightify LED On/Off/Dim
-
-
-
-Works with: 
-
-* [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -60,21 +60,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -97,15 +84,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -31,8 +31,7 @@
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
-	}
+    }
 
     tiles(scale: 2) {
 		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){
@@ -90,7 +89,7 @@ def configure() {
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
                                   TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
-    return refresh() + cmds // send refresh cmds as part of config
+    return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,154 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Author: SmartThings
- *  Date: 2016-01-19
- *
- *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
- */
-
-metadata {
-	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-		capability "Health Check"
-
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def event = zigbee.getEvent(description)
-	if (event) {
-		log.debug event
-		if (event.name=="level" && event.value==0) {}
-		else {
-			sendEvent(event)
-		}
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		def cluster = zigbee.parse(description)
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
-			}
-		}
-		else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-			if (cluster.data[0] == 0x00){
-				log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
-				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-			}
-			else {
-				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-			log.debug zigbeeMap
-		}
-	}
-}
-
-def on() {
-	zigbee.on()
-}
-
-def off() {
-	zigbee.off()
-}
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.onOffRefresh()
-}
-
-def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-	// enrolls with default periodic reporting until newer 5 min interval is confirmed
-	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value)
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}

devicetypes/smartthings/zigbee-rgbw-bulb.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-rgbw-bulb.src/README.md

@@ -1,42 +0,0 @@
-# OSRAM LIGHTIFY LED RGBW Bulb
-
-
-
-Works with: 
-
-* [OSRAM LIGHTIFY LED RGBW Bulb](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Actuator** - It represents that a device has commands.
-* **Color Control** - It represents that the color attributes of a device can be controlled (hue, saturation, color value).
-* **Color Temperature** - It represents color temperature capability measured in degree Kelvin.
-* **Polling** - It represents that a device can be polled.
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - can detect current light level (0-100 in percent)
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-A Category C6 OSRAM LIGHTIFY LED RGBW Bulb with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-It may also happen that you need to reset the device.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207728173-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-RGBW)

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -95,7 +95,7 @@ def parse(String description) {
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        def cluster = zigbee.parse(description)
+        log.trace "zigbeeMap : $zigbeeMap"
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
@@ -107,18 +107,8 @@ def parse(String description) {
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
-        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00){
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
         else {
             log.info "DID NOT PARSE MESSAGE for description : $description"
-            log.debug zigbeeMap
         }
     }
 }
@@ -138,17 +128,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -189,5 +177,5 @@ def setHue(value) {
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -82,5 +82,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -78,5 +78,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffRefresh() + zigbee.onOffConfig()
+    zigbee.onOffConfig() + zigbee.onOffRefresh()
 }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -134,5 +134,10 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    refresh()
+    zigbee.onOffConfig() +
+    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
+    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
+    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,37 +0,0 @@
-# OSRAM Lightify Tunable 60 White
-
-
-
-Works with: 
-
-* [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Color Temperature** - represents color temperature, measured in degrees Kelvin.
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated.
-* **Refresh** - _refresh()_ command for status updates
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -83,21 +83,8 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
-
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            }
-            else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-            }
-        }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
 
@@ -121,17 +108,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
+    // Device-Watch allows 2 check-in misses from device
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,134 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Actuator"
-		capability "Color Control"
-		capability "Configuration"
-		capability "Polling"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"color control.setColor"
-			}
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main(["switch"])
-		details(["switch", "refresh"])
-	}
-}
-
-//Globals
-private getATTRIBUTE_HUE() { 0x0000 }
-private getATTRIBUTE_SATURATION() { 0x0001 }
-private getHUE_COMMAND() { 0x00 }
-private getSATURATION_COMMAND() { 0x03 }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	def finalResult = zigbee.getEvent(description)
-	if (finalResult) {
-		log.debug finalResult
-		sendEvent(finalResult)
-	}
-	else {
-		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-		log.trace "zigbeeMap : $zigbeeMap"
-
-		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
-			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
-				sendEvent(name: "hue", value: hueValue, displayed:false)
-			}
-			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
-				sendEvent(name: "saturation", value: saturationValue, displayed:false)
-			}
-		}
-		else {
-			log.info "DID NOT PARSE MESSAGE for description : $description"
-		}
-	}
-}
-
-def on() {
-	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def off() {
-	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
-}
-
-def refresh() {
-	refreshAttributes() + configureAttributes()
-}
-
-def poll() {
-	refreshAttributes()
-}
-
-def configure() {
-	log.debug "Configuring Reporting and Bindings."
-	configureAttributes() + refreshAttributes()
-}
-
-def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
-}
-
-def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
-}
-
-def setLevel(value) {
-	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
-}
-
-def setColor(value){
-	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
-}
-
-def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
-}
-
-def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
-}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -123,7 +123,7 @@ def configureAttributes() {
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -141,10 +141,10 @@ def setColor(value){
 
 def setHue(value) {
     def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
 }

smartapps/egid/smart-windows.src/smart-windows.groovy

@@ -1,7 +1,7 @@
 /**
  *  Smart Windows
  *	Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!).
- *
+ * 
  *  Copyright 2014 Eric Gideon
  *
  * 	Based in part on the "When it's going to rain" SmartApp by the SmartThings team,
@@ -21,18 +21,13 @@ definition(
 	name: "Smart Windows",
 	namespace: "egid",
 	author: "Eric Gideon",
-	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your location will be used instead.",
+	description: "Compares two temperatures – indoor vs outdoor, for example – then sends an alert if windows are open (or closed!). If you don't use an external temperature device, your zipcode will be used instead.",
 	iconUrl: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn.png",
 	iconX2Url: "https://s3.amazonaws.com/smartthings-device-icons/Home/home9-icn@2x.png"
 )
 
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
-	}
-
 	section( "Set the temperature range for your comfort zone..." ) {
 		input "minTemp", "number", title: "Minimum temperature"
 		input "maxTemp", "number", title: "Maximum temperature"
@@ -44,11 +39,9 @@ preferences {
 		input "inTemp", "capability.temperatureMeasurement", title: "Indoor"
 		input "outTemp", "capability.temperatureMeasurement", title: "Outdoor (optional)", required: false
 	}
-
-	if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
-  }
-
+	section( "Set your location" ) {
+		input "zipCode", "text", title: "Zip code"
+	}
 	section( "Notifications" ) {
 		input "sendPushMessage", "enum", title: "Send a push notification?", metadata:[values:["Yes","No"]], required:false
 		input "retryPeriod", "number", title: "Minutes between notifications:"
@@ -79,7 +72,7 @@ def temperatureHandler(evt) {
 
 	def currentInTemp = evt.doubleValue
 	def openWindows = sensors.findAll { it?.latestValue("contact") == 'open' }
-
+	
 	log.trace "Temp event: $evt"
 	log.info "In: $currentInTemp; Out: $currentOutTemp"
 
@@ -105,7 +98,7 @@ def temperatureHandler(evt) {
 			if ( currentOutTemp < maxTemp && !openWindows ) {
 				send( "Open some windows to cool down the house! Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
 			} else if ( currentOutTemp > maxTemp && openWindows ) {
-				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )
+				send( "It's gotten warmer outside! You should close these windows: ${openWindows.join(', ')}. Currently ${currentInTemp}°F inside and ${currentOutTemp}°F outside." )				
 			} else {
 				log.debug "No notifications sent. Everything is in the right place."
 			}
@@ -132,11 +125,7 @@ def temperatureHandler(evt) {
 }
 
 def weatherCheck() {
-	def json 
-	if (location.channelName != 'samsungtv')
-		json = getWeatherFeature("conditions", zipCode)
-	else
-		json = getWeatherFeature("conditions")
+	def json = getWeatherFeature("conditions", zipCode)
 	def currentTemp = json?.current_observation?.temp_f
 
 	if ( currentTemp ) {
@@ -161,4 +150,4 @@ private send(msg) {
 	}
 
 	log.info msg
-}
+}

smartapps/gideon-api/gideon.src/gideon.groovy

@@ -1,253 +0,0 @@
-/**
- *  Gideon
- *
- *  Copyright 2016 Nicola Russo
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gideon",
-    namespace: "gideon.api",
-    author: "Braindrain Solutions",
-    description: "Gideon AI Smart app allows you to connect and control all of your SmartThings devices through the Gideon AI app, making your SmartThings devices even smarter.",
-    category: "Family",
-    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    oauth: [displayName: "Gideon AI API", displayLink: "gideon.ai"])
-
-
-preferences {
-	section("Control these switches...") {
-        input "switches", "capability.switch", multiple:true
-    }
-    section("Control these motion sensors...") {
-        input "motions", "capability.motionSensor", multiple:true
-    }
-    section("Control these presence sensors...") {
-    	input "presence_sensors", "capability.presenceSensor", multiple:true
-    }
-    section("Control these outlets...") {
-    	input "outlets", "capability.switch", multiple:true
-    }
-    section("Control these locks...") {
-    	input "locks", "capability.lock", multiple:true
-    }
-    section("Control these locks...") {
-	    input "temperature_sensors", "capability.temperatureMeasurement"
-    }
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-    subscribe(outlet, "energy", outletHandler)
-  	subscribe(outlet, "switch", outletHandler)
-}
-
-// TODO: implement event handlers
-def outletHandler(evt) {
-	log.debug "$outlet.currentEnergy"
-	//TODO call G API  
-}
-
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}
-
-//API Mapping
-mappings {
-	path("/getalldevices") {
-    action: [
-      			GET: "getAllDevices"
-    		]
-  	}
-	path("/doorlocks/:id/:command") {
-    action: [
-      GET: "updateDoorLock"
-    ]
-  }
-  	path("/doorlocks/:id") {
-    action: [
-      			GET: "getDoorLockStatus"
-    		]
-  	}
-  	path("/tempsensors/:id") {
-    action: [
-      GET: "getTempSensorsStatus"
-    ]
-  }
-  	path("/presences/:id") {
-    action: [
-      GET: "getPresenceStatus"
-    ]
-  }
-  	path("/motions/:id") {
-    action: [
-      GET: "getMotionStatus"
-    ]
-  }
-  	path("/outlets/:id") {
-    action: [
-      GET: "getOutletStatus"
-    ]
-  }
-  	path("/outlets/:id/:command") {
-    action: [
-      GET: "updateOutlet"
-    ]
-  }
-  	path("/switches/:command") {
-    action: [
-      PUT: "updateSwitch"
-    ]
-  }
-}
-
-//API Methods
-def getAllDevices() {
-	def locks_list = locks.collect{device(it,"Lock")}
-    def presences_list = presence_sensors.collect{device(it,"Presence")}
-    def motions_list = motions.collect{device(it,"Motion")}
-    def outlets_list = outlets.collect{device(it,"Outlet")}
-    def switches_list = switches.collect{device(it,"Switch")}
-    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
-    return [Locks: locks_list, Presences: presences_list, Motions: motions_list, Outlets: outlets_list, Switches: switches_list, Temperatures: temp_list]
-}
-
-//LOCKS
-def getDoorLockStatus() {
-	def device = locks.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('lock')]
-        }
-}
-
-def updateDoorLock() {
-	def command = params.command
-    def device = locks.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentValue('lock') == "locked")
-                  device.unlock();
-                else
-                  device.lock();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}
-
-//PRESENCE
-def getPresenceStatus() {
-
-	def device = presence_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('presence')]
-   }
-}
-
-//MOTION
-def getMotionStatus() {
-
-	def device = motions.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('motion')]
-   }
-}
-
-//OUTLET
-def getOutletStatus() {
-	
-    def device = outlets.find { it.id == params.id }
-   	if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentSwitch, Current_watt: device.currentValue("energy")]
-  }
-}
-
-def updateOutlet() {
-	
-    def command = params.command
-    def device = outlets.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentSwitch == "on")
-                  device.off();
-                else
-                  device.on();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}                
-
-//SWITCH
-def updateSwitch() {
-    def command = params.command
-    def device = switches.find { it.id == params.id }
-    if (command){
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(command == "toggle")
-            {
-                if(device.currentSwitch == "on")
-                  device.off();
-                else
-                  device.on();
-                  
-                return [Device_id: params.id, result_action: "200"]
-            }
-        }
-    }
-}
-
-//TEMPERATURE
-def getTempSensorsStatus() {
-	
-    def device = temperature_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('temperature')]
-   }
-}

smartapps/imbrianj/ready-for-rain.src/ready-for-rain.groovy

@@ -18,13 +18,8 @@ definition(
 )
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
-	}
-
-  if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
+  section("Zip code?") {
+    input "zipcode", "text", title: "Zipcode?"
   }
 
   section("Things to check?") {
@@ -65,11 +60,7 @@ def scheduleCheck(evt) {
   // Only need to poll if we haven't checked in a while - and if something is left open.
   if((now() - (30 * 60 * 1000) > state.lastCheck["time"]) && open) {
     log.info("Something's open - let's check the weather.")
-    def response
-    if (location.channelName != 'samsungtv')
-      response = getWeatherFeature("forecast", zipCode)
-    else
-      response = getWeatherFeature("forecast")
+    def response = getWeatherFeature("forecast", zipcode)
     def weather  = isStormy(response)
 
     if(weather) {

smartapps/juano2310/jawbone-up-connect.src/jawbone-up-connect.groovy

@@ -4,9 +4,6 @@
  *  Author: Juan Risso
  *  Date: 2013-12-19
  */
-
-include 'asynchttp_v1'
-
 definition(
 	name: "Jawbone UP (Connect)",
 	namespace: "juano2310",
@@ -306,8 +303,7 @@ def setup() {
 			  	def childDevice = addChildDevice('juano2310', "Jawbone User", "${app.id}.${member.xid}",null,[name:"Jawbone UP - " + member.first, completedSetup: true])
 			    if (childDevice) {
 			       	log.debug "Child Device Successfully Created"
-			        childDevice?.generateSleepingEvent(false)
-                    pollChild(childDevice)
+			        generateInitialEvent (member, childDevice)
 			    }
 			}
 		}
@@ -353,67 +349,67 @@ def uninstalled() {
 }
 
 def pollChild(childDevice) {
-		def childMap = [ value: "$childDevice.device.deviceNetworkId}"]
-
-		def params = [
-				uri: 'https://jawbone.com',
-				path: '/nudge/api/users/@me/goals',
-				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
-				contentType: 'application/json'
-		]
-
-		asynchttp_v1.get('responseGoals', params, childMap)
-
-		def params2 = [
-				uri: 'https://jawbone.com',
-				path: '/nudge/api/users/@me/moves',
-				headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ],
-				contentType: 'application/json'
-		]
-
-		asynchttp_v1.get('responseMoves', params2, childMap)
+    def member = state.member
+    generatePollingEvents (member, childDevice)
 }
 
-def responseGoals(response, dni) {
-	if (response.hasError()) {
-			log.error "response has error: $response.errorMessage"
-	} else {
-			def goals
-			try {
-					// json response already parsed into JSONElement object
-					goals = response.json.data
-			} catch (e) {
-					log.error "error parsing json from response: $e"
-			}
-			if (goals) {
-				def childDevice = getChildDevice(dni.value)
-				log.debug "Goal = ${goals.move_steps} Steps"
-				childDevice?.sendEvent(name:"goal", value: goals.move_steps)
-			} else {
-					log.debug "did not get json results from response body: $response.data"
-			}
-	}
+def generatePollingEvents (member, childDevice) {
+    // lets figure out if the member is currently "home" (At the place)
+    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
+    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
+    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
+    def goals = null
+    def moves = null
+ 	def sleeps = null
+    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        goals = response.data.data
+    }
+    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        moves = response.data.data.items[0]
+    }
+
+    try { // we are going to just ignore any errors
+        log.debug "Member = ${member.first}"
+        log.debug "Moves Goal = ${goals.move_steps} Steps"
+        log.debug "Moves = ${moves.details.steps} Steps"
+
+        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+    	//setColor(moves.details.steps,goals.move_steps,childDevice)
+    }
+    catch (e) {
+            // eat it
+    }
 }
 
-def responseMoves(response, dni) {
-	if (response.hasError()) {
-			log.error "response has error: $response.errorMessage"
-	} else {
-			def moves
-			try {
-					// json response already parsed into JSONElement object
-					moves = response.json.data.items[0]
-			} catch (e) {
-					log.error "error parsing json from response: $e"
-			}
-			if (moves) {
-				def childDevice = getChildDevice(dni.value)
-				log.debug "Moves = ${moves.details.steps} Steps"
-				childDevice?.sendEvent(name:"steps", value: moves.details.steps)
-			} else {
-					log.debug "did not get json results from response body: $response.data"
-			}
-	}
+def generateInitialEvent (member, childDevice) {
+    // lets figure out if the member is currently "home" (At the place)
+    def urlgoals = "https://jawbone.com/nudge/api/users/@me/goals"
+    def urlmoves = "https://jawbone.com/nudge/api/users/@me/moves"
+    def urlsleeps = "https://jawbone.com/nudge/api/users/@me/sleeps"
+    def goals = null
+    def moves = null
+ 	def sleeps = null
+    httpGet(uri: urlgoals, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        goals = response.data.data
+    }
+    httpGet(uri: urlmoves, headers: ["Authorization": "Bearer ${state.JawboneAccessToken}" ]) {response ->
+        moves = response.data.data.items[0]
+    }
+
+    try { // we are going to just ignore any errors
+        log.debug "Member = ${member.first}"
+        log.debug "Moves Goal = ${goals.move_steps} Steps"
+        log.debug "Moves = ${moves.details.steps} Steps"
+        log.debug "Sleeping state = false"
+        childDevice?.generateSleepingEvent(false)
+        childDevice?.sendEvent(name:"steps", value: moves.details.steps)
+        childDevice?.sendEvent(name:"goal", value: goals.move_steps)
+    	//setColor(moves.details.steps,goals.move_steps,childDevice)
+    }
+    catch (e) {
+            // eat it
+    }
 }
 
 def setColor (steps,goal,childDevice) {
@@ -437,7 +433,7 @@ def hookEventHandler() {
     // get some stuff we need
     def userId = json.events.user_xid[0]
     def	json_type = json.events.type[0]
-	  def json_action = json.events.action[0]
+	def json_action = json.events.action[0]
 
     //log.debug json
     log.debug "Userid = ${userId}"

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,23 +454,17 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
-	// send 100% completion event
-	sendTimeRemainingEvent(100)
-
-	// send a non-displayed 0% completion to reset tiles
-	sendTimeRemainingEvent(0, false)
-
-	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
+	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete, displayed = true) {
+def sendTimeRemainingEvent(percentComplete) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -480,7 +474,7 @@ def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -614,6 +608,8 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
+
+	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -131,7 +131,10 @@ def bulbDiscovery() {
 	def refreshInterval = 3
 	state.inBulbDiscovery = true
 	def bridge = null
-
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+		subscribe(bridge, "bulbList", bulbListData)
+	}
 	state.bridgeRefreshCount = 0
 	def allLightsFound = bulbsDiscovered() ?: [:]
 
@@ -256,6 +259,10 @@ Map bulbsDiscovered() {
 	return bulbmap
 }
 
+def bulbListData(evt) {
+	state.bulbs = evt.jsonData
+}
+
 Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
@@ -309,6 +316,29 @@ def uninstalled(){
 	state.username = null
 }
 
+// Handles events to add new bulbs
+def bulbListHandler(hub, data = "") {
+	def msg = "Bulbs list not processed. Only while in settings menu."
+    def bulbs = [:]
+	if (state.inBulbDiscovery) {
+        def logg = ""
+        log.trace "Adding bulbs to state..."
+        state.bridgeProcessedLightList = true
+        def object = new groovy.json.JsonSlurper().parseText(data)
+        object.each { k,v ->
+            if (v instanceof Map)
+                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
+        }
+    }
+    def bridge = null
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
+	}
+	msg = "${bulbs.size()} bulbs found. ${bulbs}"
+	return msg
+}
+
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -540,8 +570,11 @@ void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
 	if (isValidSource(hubResponse.mac)) {
 		def body = hubResponse.json
 		if (!body?.state?.on) { //check if first time poll made it here by mistake
+			def bulbs = getHueBulbs()
 			log.debug "Adding bulbs to state!"
-			updateBulbState(body, hubResponse.hubId)
+			body.each { k, v ->
+				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
+			}
 		}
 	}
 }
@@ -657,8 +690,11 @@ def locationHandler(evt) {
 			} else {
 				//GET /api/${state.username}/lights response (application/json)
 				if (!body?.state?.on) { //check if first time poll made it here by mistake
+					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
-					updateBulbState(body, parsedEvent.hub)
+					body.each { k,v ->
+						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
+					}
 				}
 			}
 		}
@@ -718,7 +754,7 @@ private void checkBridgeStatus() {
 		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.value.idNumber is Offline"
+				log.warn "Bridge $it.key is Offline"
 				d.sendEvent(name: "status", value: "Offline")
 
 				state.bulbs?.each {
@@ -743,31 +779,6 @@ def isInBulbDiscovery() {
 	return state.inBulbDiscovery
 }
 
-private updateBulbState(messageBody, hub) {
-	def bulbs = getHueBulbs()
-
-	// Copy of bulbs used to locate old lights in state that are no longer on bridge
-	def toRemove = [:]
-	toRemove << bulbs
-
-	messageBody.each { k,v ->
-
-		if (v instanceof Map) {
-			if (bulbs[k] == null) {
-				bulbs[k] = [:]
-			}
-			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, remove: false]
-			toRemove.remove(k)
-		}
-	}
-
-	// Remove bulbs from state that are no longer discovered
-	toRemove.each { k,v ->
-		log.warn "${bulbs[k].name} no longer exists on bridge, removing"
-		bulbs.remove(k)
-	}
-}
-
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -1162,14 +1173,7 @@ def setColor(childDevice, huesettings) {
 }
 
 def ping(childDevice) {
-	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
-		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
-			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
-			return "Bridge is Online"
-		} else {
-			return "Bridge is Offline"
-		}
-	} else if (isOnline(getId(childDevice))) {
+	if (isOnline(getId(childDevice))) {
 		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
 		return "Device is Online"
 	} else {
@@ -1194,7 +1198,7 @@ private poll() {
 }
 
 private isOnline(id) {
-	return (state.bulbs[id]?.online != null && state.bulbs[id]?.online) || state.bulbs[id]?.online == null
+	return (state.bulbs[id].online != null && state.bulbs[id].online) || state.bulbs[id].online == null
 }
 
 private put(path, body) {
@@ -1261,7 +1265,7 @@ def convertBulbListToMap() {
 	try {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
-			state.bulbs?.unique {it.id}.each { bulb ->
+			state.bulbs.unique {it.id}.each { bulb ->
 				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,7 +34,6 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
-include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -97,7 +96,7 @@ def authPage() {
     def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
-			log.debug "Harmony - About to create access token"
+			log.debug "About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
@@ -110,28 +109,26 @@ def authPage() {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 5
+		def refreshInterval = 3
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-    def numFoundAct = actoptions.size() ?: 0
-
+        def numFoundAct = actoptions.size() ?: 0
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
-
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-      // Virtual activity flag
-      if (numFoundHub > 0 && numFoundAct > 0 && true)
+            // Virtual activity flag
+            if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
 			}
-    if (state.resethub)
+            if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -141,13 +138,13 @@ def callback() {
 	def redirectUrl = null
 	if (params.authQueryString) {
 		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
-		log.debug "Harmony - redirectUrl: ${redirectUrl}"
+		log.debug "redirectUrl: ${redirectUrl}"
 	} else {
-		log.warn "Harmony - No authQueryString"
+		log.warn "No authQueryString"
 	}
 
 	if (state.HarmonyAccessToken) {
-		log.debug "Harmony - Access token already exists"
+		log.debug "Access token already exists"
 		discovery()
 		success()
 	} else {
@@ -155,27 +152,27 @@ def callback() {
 		if (code) {
 			if (code.size() > 6) {
 				// Harmony code
-				log.debug "Harmony - Exchanging code for access token"
+				log.debug "Exchanging code for access token"
 				receiveToken(redirectUrl)
 			} else {
 				// Initiate the Harmony OAuth flow.
 				init()
 			}
 		} else {
-			log.debug "Harmony - This code should be unreachable"
+			log.debug "This code should be unreachable"
 			success()
 		}
 	}
 }
 
 def init() {
-	log.debug "Harmony - Requesting Code"
+	log.debug "Requesting Code"
 	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${servercallbackUrl}" ]
 	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
-	log.debug "Harmony - receiveToken"
+	log.debug "receiveToken"
     def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
@@ -186,7 +183,7 @@ def receiveToken(redirectUrl = null) {
         }
 	} catch (java.util.concurrent.TimeoutException e) {
     	fail(e)
-		log.warn "Harmony - Connection timed out, please try again later."
+		log.warn "Connection timed out, please try again later."
 	}
     discovery()
 	if (state.HarmonyAccessToken) {
@@ -310,7 +307,7 @@ def buildRedirectUrl(page) {
 
 def installed() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -319,7 +316,7 @@ def installed() {
 
 def updated() {
 	if (!state.accessToken) {
-		log.debug "Harmony - About to create access token"
+		log.debug "About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -330,9 +327,9 @@ def uninstalled() {
 	if (state.HarmonyAccessToken) {
 		try {
         	state.HarmonyAccessToken = ""
-        	log.debug "Harmony - Success disconnecting Harmony from SmartThings"
+        	log.debug "Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
-			log.error "Harmony - Error disconnecting Harmony from SmartThings: ${e.statusCode}"
+			log.error "Error disconnecting Harmony from SmartThings: ${e.statusCode}"
 		}
 	}
 }
@@ -341,8 +338,7 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-    runEvery5Minutes("poll")
-    getActivityList()
+        runEvery5Minutes("poll")
 	}
 }
 
@@ -351,7 +347,7 @@ def getHarmonydevices() {
 }
 
 Map discoverDevices() {
-    log.trace "Harmony - Discovering devices..."
+    log.trace "Discovering devices..."
     discovery()
     if (getHarmonydevices() != []) {
         def devices = state.Harmonydevices.hubs
@@ -363,7 +359,7 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	  it.value.response.data.activities.each {
+        	it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
@@ -381,177 +377,164 @@ def discovery() {
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
 	    	if (response.status == 200) {
-            	log.debug "Harmony - valid Token"
+            	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
+                getActivityList()
+                poll()
 	        } else {
-            	log.debug "Harmony - Error: $response.status"
+            	log.debug "Error: $response.status"
             }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
             state.remove("HarmonyAccessToken")
-            log.warn "Harmony - Harmony Access token has expired"
+            log.warn "Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
-		log.warn "Harmony - Connection to the hub timed out. Please restart the hub and try again."
+		log.warn "Connection to the hub timed out. Please restart the hub and try again."
     state.resethub = true
  	} catch (e) {
-    log.info "Harmony - Error: $e"
+    log.info "Logitech Harmony - Error: $e"
 	}
     return null
 }
 
 def addDevice() {
-    log.trace "Harmony - Adding Hubs"
+    log.trace "Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyHubs.find { it.key == dni }
             d = addChildDevice("smartthings", "Logitech Harmony Hub C2C", dni, null, [label:"${newAction.value}"])
-            log.trace "Harmony - Created ${d.displayName} with id $dni"
+            log.trace "created ${d.displayName} with id $dni"
             poll()
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
-    log.trace "Harmony - Adding Activities"
+    log.trace "Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
             if (newAction) {
 	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
-	            log.trace "Harmony - Created ${d.displayName} with id $dni"
+	            log.trace "created ${d.displayName} with id $dni"
 	            poll()
             }
         } else {
-            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
+            log.trace "found ${d.displayName} with id $dni already exists"
         }
     }
 }
 
 def activity(dni,mode) {
-    def tokenParam = [auth: state.HarmonyAccessToken]
-    def url
+    def Params = [auth: state.HarmonyAccessToken]
+    def msg = "Command failed"
+    def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
         } else {
-          def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
+            def activityId = aux[2]
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
 	}
-  def params = [
-      uri: url,
-      contentType: 'application/json'
-  ]
-  asynchttp_v1.post('activityResponse', params)
-  return "Command Sent"
-}
-
-def activityResponse(response, data) {
-  if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
-    if (response.status == 401) { // token is expired
-      state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
+	try {
+    	httpPostJson(uri: url) { response ->
+        	if (response.data.code == 200 || dni == "all") {
+            	msg = "Command sent succesfully"
+            	state.aux = 0
+            } else {
+            	msg = "Command failed. Error: $response.data.code"
+            }
+		}
+    } catch (groovyx.net.http.HttpResponseException ex) {
+        log.error ex
+        if (state.aux == 0) {
+        	state.aux = 1
+        	activity(dni,mode)
+        } else {
+        	msg = ex
+            state.aux = 0
+        }
+    } catch(Exception ex) {
+    	msg = ex
     }
-  } else {
-    if (response.status == 200) {
-      log.trace "Harmony - Command sent succesfully"
-      poll()
-    } else {
-      log.trace "Harmony - Command failed. Error: $response.status"
-    }
-  }
+    runIn(10, "poll", [overwrite: true])
+    return msg
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-        def tokenParam = [auth: state.HarmonyAccessToken]
-        def params = [
-            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
-            headers: ["Accept": "application/json"],
-            contentType: 'application/json'
-        ]
-        asynchttp_v1.get('pollResponse', params)
-      } else {
-        log.warn "Harmony - Access token has expired"
-      }
-}
-
-def pollResponse(response, data) {
-	if (response.hasError()) {
-    log.error "Harmony - response has error: $response.errorMessage"
-    if (response.status == 401) { // token is expired
-      state.remove("HarmonyAccessToken")
-      log.warn "Harmony - Access token has expired"
-    }
-	} else {
-			def ResponseValues
-			try {
-					// json response already parsed into JSONElement object
-					ResponseValues = response.json
-			} catch (e) {
-					log.error "Harmony - error parsing json from response: $e"
-			}
-			if (ResponseValues) {
-        def map = [:]
-        ResponseValues.hubs.each {
-        if (it.value.message == "OK") {
-              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-              def hub = getChildDevice("harmony-${it.key}")
-              if (hub) {
-                  if (it.value.response.data.currentAvActivity == "-1") {
-                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
-                  } else {
-                      def currentActivity
-                      def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
-                      if (activityDTH)
-                        currentActivity = activityDTH.device.displayName
-                      else
-                        currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
-                  }
-              }
-          } else {
-            log.trace "Harmony - error response: $it.value.message"
-          }
-        }
-        def activities = getChildDevices()
-        def activitynotrunning = true
-        activities.each { activity ->
-            def act = activity.deviceNetworkId.split('-')
-            if (act.size() > 2) {
-                def aux = map.find { it.key == act[1] }
-                if (aux) {
-                    def aux2 = aux.value.split(',')
-                    def childDevice = getChildDevice(activity.deviceNetworkId)
-                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                        childDevice?.sendEvent(name: "switch", value: "on")
-                        if (aux2[1] == "1")
-                            runIn(5, "poll", [overwrite: true])
-                    } else {
-                        childDevice?.sendEvent(name: "switch", value: "off")
-                        if (aux2[1] == "3")
-                            runIn(5, "poll", [overwrite: true])
+    	  getActivityList()
+        def Params = [auth: state.HarmonyAccessToken]
+        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
+        try {
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+                def map = [:]
+                response.data.hubs.each {
+		            if (it.value.message == "OK") {
+	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+	                    def hub = getChildDevice("harmony-${it.key}")
+	                    if (hub) {
+	                        if (it.value.response.data.currentAvActivity == "-1") {
+	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+	                        } else {
+	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
+	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+	                        }
+	                    }
+	                } else {
+		                log.trace it.value.message
+	                }
+                }
+                def activities = getChildDevices()
+                def activitynotrunning = true
+                activities.each { activity ->
+                    def act = activity.deviceNetworkId.split('-')
+                    if (act.size() > 2) {
+                        def aux = map.find { it.key == act[1] }
+                        if (aux) {
+                            def aux2 = aux.value.split(',')
+                            def childDevice = getChildDevice(activity.deviceNetworkId)
+                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
+                                childDevice?.sendEvent(name: "switch", value: "on")
+                                if (aux2[1] == "1")
+                                    runIn(5, "poll", [overwrite: true])
+                            } else {
+                                childDevice?.sendEvent(name: "switch", value: "off")
+                                if (aux2[1] == "3")
+                                    runIn(5, "poll", [overwrite: true])
+                            }
+                        }
                     }
                 }
+                return "Poll completed $map - $state.hubs"
             }
+        } catch (groovyx.net.http.HttpResponseException e) {
+              if (e.statusCode == 401) { // token is expired
+                  state.remove("HarmonyAccessToken")
+                  log.warn "Harmony Access token has expired"
+              }
+        } catch (java.net.SocketTimeoutException e) {
+        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
+              state.resethub = true
+        } catch (e) {
+        	log.info "Logitech Harmony - Error: $e"
         }
-			} else {
-					log.debug "Harmony - did not get json results from response body: $response.data"
-			}
-	}
+    }
 }
 
+
 def getActivityList() {
+	// GET ACTIVITY'S NAME
     if (state.HarmonyAccessToken) {
         def Params = [auth: state.HarmonyAccessToken]
         def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
@@ -568,19 +551,21 @@ def getActivityList() {
                                 [id: it.key, name: it.value['name'], type: it.value['type']]
                             }
                             activities += [id: "off", name: "Activity OFF", type: "0"]
+                            log.trace activities
                         }
                         hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-					          }
+					}
                 }
             }
         } catch (groovyx.net.http.HttpResponseException e) {
         	log.trace e
         } catch (java.net.SocketTimeoutException e) {
         	log.trace e
-		    } catch(Exception e) {
+		} catch(Exception e) {
         	log.trace e
-		    }
+		}
     }
+	return activity
 }
 
 def getActivityName(activity,hubId) {
@@ -643,7 +628,7 @@ def sendNotification(msg) {
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
-    log.debug "Harmony - request = ${request}"
+    log.debug "request = ${request}"
 
     def json = request.JSON
 
@@ -652,14 +637,14 @@ def hookEventHandler() {
 }
 
 def listDevices() {
-	log.debug "Harmony - getDevices(), params: ${params}"
+	log.debug "getDevices, params: ${params}"
 	allDevices.collect {
 		deviceItem(it)
 	}
 }
 
 def getDevice() {
-	log.debug "Harmony - getDevice(), params: ${params}"
+	log.debug "getDevice, params: ${params}"
 	def device = allDevices.find { it.id == params.id }
 	if (!device) {
 		render status: 404, data: '{"msg": "Device not found"}'
@@ -672,7 +657,7 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-	log.debug "Harmony - updateDevice(), params: ${params}, request: ${data}"
+	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
@@ -740,7 +725,7 @@ def getDeviceCapabilityCommands(deviceCapabilities) {
 }
 
 def listSubscriptions() {
-	log.debug "Harmony - listSubscriptions()"
+	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
 		def deviceInfo = state[it.device.id]
 		def response = [
@@ -761,17 +746,17 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
 		def device = allDevices.find { it.id == data.deviceId }
 		if (device) {
 			if (!state.harmonyHubs) {
-				log.debug "Harmony - Adding callbackUrl: $callbackUrl"
+				log.debug "Adding callbackUrl: $callbackUrl"
 				state[device.id] = [callbackUrl: callbackUrl]
 			}
-			log.debug "Harmony - Adding subscription"
+			log.debug "Adding subscription"
 			def subscription = subscribe(device, attribute, deviceHandler)
 			if (!subscription || !subscription.eventSubscription) {
 				subscription = app.subscriptions?.find { it.device?.device && it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
@@ -799,7 +784,7 @@ def removeSubscription() {
 
 	log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
 	if (device) {
-		log.debug "Harmony - Removing subscription for device: ${device.id}"
+		log.debug "Removing subscription for device: ${device.id}"
 		state.remove(device.id)
 		unsubscribe(device)
 	}
@@ -823,17 +808,16 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {
 		if (deviceInfo.callbackUrl) {
 			sendToHarmony(evt, deviceInfo.callbackUrl)
 		} else {
-			log.warn "Harmony - No callbackUrl set for device: ${evt.deviceId}"
+			log.warn "No callbackUrl set for device: ${evt.deviceId}"
 		}
 	} else {
-		log.warn "Harmony - No subscribed device found for device: ${evt.deviceId}"
+		log.warn "No subscribed device found for device: ${evt.deviceId}"
 	}
 }
 
@@ -857,12 +841,12 @@ def sendToHarmony(evt, String callbackUrl) {
       body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
     ]
     try {
-        log.debug "Harmony - Sending data to Harmony Cloud: $params"
+        log.debug "Sending data to Harmony Cloud: $params"
         httpPostJson(params) { resp ->
-            log.debug "Harmony - Cloud Response: ${resp.status}"
+            log.debug "Harmony Cloud - Response: ${resp.status}"
         }
     } catch (e) {
-        log.error "Harmony - Cloud Something went wrong: $e"
+        log.error "Harmony Cloud - Something went wrong: $e"
     }
   }
 }
@@ -887,10 +871,10 @@ def activityCallback() {
 		if (data.errorCode == "200") {
 			device.setCurrentActivity(data.currentActivityId)
 		} else {
-			log.warn "Harmony - Activity callback error: ${data}"
+			log.warn "Activity callback error: ${data}"
 		}
 	} else {
-		log.warn "Harmony - Activity callback sent to non-existant dni: ${params.dni}"
+		log.warn "Activity callback sent to non-existant dni: ${params.dni}"
 	}
 	render status: 200, data: '{"msg": "Successfully received callbackUrl"}'
 }
@@ -924,13 +908,13 @@ def harmony() {
 }
 
 def deleteHarmony() {
-	log.debug "Harmony - Trying to delete Harmony hub with mac: ${params.mac}"
+	log.debug "Trying to delete Harmony hub with mac: ${params.mac}"
 	def harmonyHub = state.harmonyHubs?.find { it.mac == params.mac }
 	if (harmonyHub) {
-		log.debug "Harmony - Deleting Harmony hub with mac: ${params.mac}"
+		log.debug "Deleting Harmony hub with mac: ${params.mac}"
 		state.harmonyHubs.remove(harmonyHub)
 	} else {
-		log.debug "Harmony - Couldn't find Harmony hub with mac: ${params.mac}"
+		log.debug "Couldn't find Harmony hub with mac: ${params.mac}"
 	}
 	render status: 204, data: "{}"
 }

smartapps/smartthings/severe-weather-alert.src/severe-weather-alert.groovy

@@ -26,22 +26,17 @@ definition(
 )
 
 preferences {
-
-  if (!(location.zipCode || ( location.latitude && location.longitude )) && location.channelName == 'samsungtv') {
-		section { paragraph title: "Note:", "Location is required for this SmartApp. Go to 'Location Name' settings to setup your correct location." }
+	section ("In addition to push notifications, send text alerts to...") {
+        input("recipients", "contact", title: "Send notifications to") {
+            input "phone1", "phone", title: "Phone Number 1", required: false
+            input "phone2", "phone", title: "Phone Number 2", required: false
+            input "phone3", "phone", title: "Phone Number 3", required: false
+        }
 	}
 
-  if (location.channelName != 'samsungtv') {
-		section( "Set your location" ) { input "zipCode", "text", title: "Zip code" }
-  }
-
-	section ("In addition to push notifications, send text alerts to...") {
-      input("recipients", "contact", title: "Send notifications to") {
-          input "phone1", "phone", title: "Phone Number 1", required: false
-          input "phone2", "phone", title: "Phone Number 2", required: false
-          input "phone3", "phone", title: "Phone Number 3", required: false
-      }
-	 }
+	section ("Zip code (optional, defaults to location coordinates)...") {
+		input "zipcode", "text", title: "Zip Code", required: false
+	}
 }
 
 def installed() {
@@ -66,7 +61,7 @@ def checkForSevereWeather() {
 	def alerts
 	if(locationIsDefined()) {
 		if(zipcodeIsValid()) {
-			alerts = getWeatherFeature("alerts", zipCode)?.alerts
+			alerts = getWeatherFeature("alerts", zipcode)?.alerts
 		} else {
 			log.warn "Severe Weather Alert: Invalid zipcode entered, defaulting to location's zipcode"
 			alerts = getWeatherFeature("alerts")?.alerts