Adding changes mentioned by @strelitzia123

devicedata has been deprecated in favor of getstationsdata and will be removed at the end of November.

*Note* I haven't actually tested this change due to time limitations. Someone should check this out and verify it behaves properly before merging.

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -127,9 +127,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 	def map = [ displayed: true ]
     switch (cmd.sensorType) {
     	case 1:
-        	map.name = "temperature"
-            map.unit = cmd.scale == 1 ? "F" : "C"
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, map.unit, cmd.precision)
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+            map.unit = getTemperatureScale()
+            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
             break
     	case 3:
         	map.name = "illuminance"

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -93,20 +93,19 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def healthPoll() {
+    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    schedule("0 0/5 * * * ? *", "healthPoll")
-    log.debug "Configuring Reporting and Bindings."
+    runEvery5Minutes("healthPoll")
     // Device-Watch allows 2 check-in misses from device
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint","number"
-		attribute "thermostatStatus","string"
+		attribute "thermostatSetpoint", "number"
+		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "number"
+		attribute "deviceTemperatureUnit", "string"
 	}
 
 	tiles {
@@ -655,55 +655,60 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	def targetHeatingSetpoint
-	def targetCoolingSetpoint
-
-	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat" || mode == "auxHeatOnly"){
-		if (temp.value > coolingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = coolingSetpoint
-		}
-	} else if (mode == "cool") {
-		//enforce limits before sending request to cloud
-		if (temp.value < heatingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = heatingSetpoint
-			targetCoolingSetpoint = temp.value
-		}
-	}
-
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	if (mode == "off" || mode == "auto") {
+		log.warn "this mode: $mode does not allow alterSetpoint"
 	} else {
-		log.error "Error alterSetpoint()"
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
+		def deviceId = device.deviceNetworkId.split(/\./).last()
+
+		def targetHeatingSetpoint
+		def targetCoolingSetpoint
+
+		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
-			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			if (temp.value > coolingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = coolingSetpoint
+			}
 		} else if (mode == "cool") {
-			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			//enforce limits before sending request to cloud
+			if (temp.value < heatingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = heatingSetpoint
+				targetCoolingSetpoint = temp.value
+			}
 		}
+
+		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+		} else {
+			log.error "Error alterSetpoint()"
+			if (mode == "heat" || mode == "auxHeatOnly"){
+				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			} else if (mode == "cool") {
+				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			}
+		}
+		generateStatusEvent()
 	}
-	generateStatusEvent()
 }
 
 def generateStatusEvent() {

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,9 +7,11 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
+		capability "Health Check"
+
 		attribute "networkAddress", "string"
-        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-        // Possible values "Online" or "Offline"
+		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+		// Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -42,6 +44,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -70,13 +76,8 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
-					} else {
-						// Sending Bulbs List to parent"
-						if (parent.isInBulbDiscovery())
-							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				}
-				else if (contentType?.contains("xml")) {
+				} else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -85,3 +86,7 @@ def parse(description) {
 	}
 	results
 }
+
+def ping() {
+	log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -174,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent.manualRefresh()
+    parent?.manualRefresh()
 }
 
 def verifyPercent(percent) {

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -0,0 +1,37 @@
+# Nyce Door/Window Sensor (Open/Close Sensor)
+
+
+
+Works with:
+
+* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (with possible values - open/closed)
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 Nyce Door/Window sensor that has 12min check-in interval
+
+## Battery Specification
+
+One 3V CR2032 battery required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,25 +19,26 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-    	capability "Battery"
+		capability "Battery"
 		capability "Configuration"
-        capability "Contact Sensor"
+		capability "Contact Sensor"
 		capability "Refresh"
-        
-        command "enrollResponse"
- 
- 
- 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+		capability "Health Check"
+
+		command "enrollResponse"
+
+
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
- 
+
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -273,23 +274,28 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def configCmds = [
-			//battery reporting and heartbeat
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
-
-
+	def enrollCmds = [
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	return configCmds
+	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
@@ -334,7 +340,8 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	[
+	def refreshCmds = [
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
+	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/osram-lightify-gardenspot-mini-rgb.src/osram-lightify-gardenspot-mini-rgb.groovy

@@ -21,9 +21,6 @@ metadata {
         attribute "colorName", "string"
 
         command "setAdjustedColor"
-
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
     }
 
     // simulator metadata

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -133,7 +133,7 @@ def refresh() {
 }
 
 def configure() {
-	onOffConfig() + levelConfig() + powerConfig() + refresh()
+	refresh() + onOffConfig() + levelConfig() + powerConfig()
 }
 
 

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -16,7 +16,7 @@
 
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -104,8 +104,21 @@ def parse(String description) {
 		}
 	}
 	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
+		def cluster = zigbee.parse(description)
+
+		if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07){
+			if (cluster.data[0] == 0x00) {
+				log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+			}
+			else {
+				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+			}
+		}
+		else {
+			log.warn "DID NOT PARSE MESSAGE for description : $description"
+			log.debug "${cluster}"
+		}
 	}
 }
 
@@ -128,10 +141,12 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
+	refresh() + zigbee.onOffConfig(0, 300) + powerConfig()
 }
 
 //power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -118,14 +118,28 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
 				break
 
             case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
                 break
         }
     }
@@ -135,10 +149,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -292,19 +304,13 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-	]
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -122,19 +122,37 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
 				break
 
 			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
 				break
 
 			case 0x0406:
-				log.debug 'motion'
-				resultMap.name = 'motion'
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					log.debug 'motion'
+					resultMap.name = 'motion'
+				}
 				break
 		}
 	}
@@ -144,10 +162,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
 		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -303,19 +319,13 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-
-	def enrollCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-	]
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -255,13 +255,9 @@ def refresh() {
 }
 
 def configure() {
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 
 	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -270,7 +266,7 @@ def configure() {
 		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-    return configCmds + refresh() // send refresh cmds as part of config
+    return refresh() + configCmds  // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -147,20 +147,33 @@ private Map parseCatchAllMessage(String description) {
 	if (shouldProcessMessage(cluster)) {
 		switch(cluster.clusterId) {
 			case 0x0001:
-			resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
 			break
 
 			case 0xFC02:
-			log.debug 'ACCELERATION'
+				log.debug 'ACCELERATION'
 			break
 
 			case 0x0402:
-			log.debug 'TEMP'
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
+				if (cluster.command == 0x07) {
+					if(cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+			break
 		}
 	}
 
@@ -169,10 +182,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
 	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
 	boolean ignoredMessage = cluster.profileId != 0x0104 ||
 	cluster.command == 0x0B ||
-	cluster.command == 0x07 ||
 	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
 	return !ignoredMessage
 }
@@ -401,22 +412,22 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	def configCmds = enrollResponse() +
-			zigbee.batteryConfig() +
+	def configCmds = zigbee.batteryConfig() +
 			zigbee.temperatureConfig(30, 300) +
 			zigbee.configureReporting(0xFC02, 0x0010, 0x18, 10, 3600, 0x01, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0012, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0013, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode]) +
 			zigbee.configureReporting(0xFC02, 0x0014, 0x29, 1, 3600, 0x0001, [mfgCode: manufacturerCode])
 
-	return configCmds + refresh()
+	return refresh() + configCmds
 }
 
 private getEndpointId() {

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -277,12 +277,8 @@ def getTemperature(value) {
 def configure() {
 	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
-
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
@@ -295,7 +291,7 @@ def configure() {
 		"zcl global send-me-a-report 0xFC02 2 0x18 30 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+	return refresh() + configCmds // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -109,15 +109,28 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
                 break
 
             case 0x0402:
-                log.debug 'TEMP'
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
+				if (cluster.command == 0x07){
+					if (cluster.data[0] == 0x00) {
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
                 break
         }
     }
@@ -127,10 +140,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
-    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -255,19 +266,15 @@ def refresh() {
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
-	]
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+    return refresh() + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -93,20 +93,37 @@ private Map parseCatchAllMessage(String description) {
     if (shouldProcessMessage(cluster)) {
         switch(cluster.clusterId) {
             case 0x0001:
-            	resultMap = getBatteryResult(cluster.data.last())
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					resultMap = getBatteryResult(cluster.data.last())
+				}
                 break
 
             case 0x0402:
-                // temp is last 2 data values. reverse to swap endian
-                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-                def value = getTemperature(temp)
-                resultMap = getTemperatureResult(value)
-                break
+				if (cluster.command == 0x07) {
+					if (cluster.data[0] == 0x00){
+						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+					}
+					else {
+						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+					}
+				}
+				else {
+					// temp is last 2 data values. reverse to swap endian
+					String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+					def value = getTemperature(temp)
+					resultMap = getTemperatureResult(value)
+				}
+				break
 
 			case 0xFC45:
-                String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
-                String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
-                resultMap = getHumidityResult(display)
+				// 0x07 - configure reporting
+				if (cluster.command != 0x07) {
+					String pctStr = cluster.data[-1, -2].collect { Integer.toHexString(it) }.join('')
+					String display = Math.round(Integer.valueOf(pctStr, 16) / 100)
+					resultMap = getHumidityResult(display)
+				}
                 break
         }
     }
@@ -116,10 +133,8 @@ private Map parseCatchAllMessage(String description) {
 
 private boolean shouldProcessMessage(cluster) {
     // 0x0B is default response indicating message got through
-    // 0x07 is bind message
     boolean ignoredMessage = cluster.profileId != 0x0104 ||
         cluster.command == 0x0B ||
-        cluster.command == 0x07 ||
         (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
     return !ignoredMessage
 }
@@ -235,11 +250,7 @@ private Map getTemperatureResult(value) {
 
 private Map getHumidityResult(value) {
 	log.debug 'Humidity'
-	return [
-		name: 'humidity',
-		value: value,
-		unit: '%'
-	]
+	return value ? [name: 'humidity', value: value, unit: '%'] : [:]
 }
 
 /**
@@ -252,20 +263,16 @@ def ping() {
 def refresh()
 {
 	log.debug "refresh temperature, humidity, and battery"
-	[
-
-		"zcl mfg-code 0xC2DF", "delay 1000",
-		"zcl global read 0xFC45 0", "delay 1000",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-        "st rattr 0x${device.deviceNetworkId} 1 1 0x20"
-
-	]
+	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +  // New firmware
+			zigbee.readAttribute(0x0402, 0x0000) +
+			zigbee.readAttribute(0x0001, 0x0020)
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [
@@ -276,7 +283,7 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) +  refresh() // send refresh cmds as part of config
+	return refresh() + humidityConfigCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300)  // send refresh cmds as part of config
 }
 
 private hex(value) {

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -89,14 +89,8 @@ def parse(String description) {
 }
 
 private Map parseIasButtonMessage(String description) {
-    int zoneInt = Integer.parseInt((description - "zone status 0x"), 16)
-    if (zoneInt & 0x02) {
-        resultMap = getButtonResult('press')
-    } else {
-        resultMap = getButtonResult('release')
-    }
-
-    return resultMap
+    def zs = zigbee.parseZoneStatus(description)
+    return zs.isAlarm2Set() ? getButtonResult("press") : getButtonResult("release")
 }
 
 private Map getBatteryResult(rawValue) {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -93,5 +93,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
+    refresh()
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -60,8 +60,21 @@ def parse(String description) {
         }
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
+        def cluster = zigbee.parse(description)
+
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug "${cluster}"
+        }
     }
 }
 
@@ -84,13 +97,15 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig()
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -90,7 +90,7 @@ def configure() {
         zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
                                   TYPE_U8, 600, 21600, 0x01)
     log.info "configure() --- cmds: $cmds"
-    return cmds + refresh() // send refresh cmds as part of config
+    return refresh() + cmds // send refresh cmds as part of config
 }
 
 def refresh() {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -0,0 +1,154 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Author: SmartThings
+ *  Date: 2016-01-19
+ *
+ *  This DTH should serve as the generic DTH to handle RGB ZigBee HA devices (For color bulbs with no color temperature)
+ */
+
+metadata {
+	definition (name: "ZigBee RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+
+		capability "Actuator"
+		capability "Color Control"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Switch"
+		capability "Switch Level"
+		capability "Health Check"
+
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB"
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"color control.setColor"
+			}
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["switch"])
+		details(["switch", "refresh"])
+	}
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def event = zigbee.getEvent(description)
+	if (event) {
+		log.debug event
+		if (event.name=="level" && event.value==0) {}
+		else {
+			sendEvent(event)
+		}
+	}
+	else {
+		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+		def cluster = zigbee.parse(description)
+
+		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
+			}
+			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
+			}
+		}
+		else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+			if (cluster.data[0] == 0x00){
+				log.debug "ON/OFF REPORTING CONFIG RESPONSE: $cluster"
+				sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+			}
+			else {
+				log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+			}
+		}
+		else {
+			log.info "DID NOT PARSE MESSAGE for description : $description"
+			log.debug zigbeeMap
+		}
+	}
+}
+
+def on() {
+	zigbee.on()
+}
+
+def off() {
+	zigbee.off()
+}
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.onOffRefresh()
+}
+
+def refresh() {
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def configure() {
+	log.debug "Configuring Reporting and Bindings."
+	// Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+	// enrolls with default periodic reporting until newer 5 min interval is confirmed
+	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+}
+
+def setLevel(value) {
+	zigbee.setLevel(value)
+}
+
+def setColor(value){
+	log.trace "setColor($value)"
+	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+}
+
+def setHue(value) {
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Control"
@@ -95,7 +95,7 @@ def parse(String description) {
     }
     else {
         def zigbeeMap = zigbee.parseDescriptionAsMap(description)
-        log.trace "zigbeeMap : $zigbeeMap"
+        def cluster = zigbee.parse(description)
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
@@ -107,8 +107,18 @@ def parse(String description) {
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
+        else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00){
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
         else {
             log.info "DID NOT PARSE MESSAGE for description : $description"
+            log.debug zigbeeMap
         }
     }
 }
@@ -128,15 +138,17 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION) + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    refresh()
 }
 
 def setColorTemperature(value) {
@@ -177,5 +189,5 @@ def setHue(value) {
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -82,5 +82,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
+    refresh()
 }

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -78,5 +78,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.onOffRefresh()
+    zigbee.onOffRefresh() + zigbee.onOffConfig()
 }

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -134,10 +134,5 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() +
-    zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING, TYPE_U8, 600, 21600, 1) +
-    zigbee.configureReporting(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE, TYPE_ENUM8, 5, 21600, 1) +
-    zigbee.onOffRefresh() +
-    zigbee.readAttribute(CLUSTER_BASIC, BASIC_ATTR_POWER_SOURCE) +
-    zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
+    refresh()
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -83,8 +83,21 @@ def parse(String description) {
         }
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
+        def cluster = zigbee.parse(description)
+
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            }
+            else {
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+            }
+        }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug "${cluster}"
+        }
     }
 }
 
@@ -108,15 +121,17 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-    // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    // Device-Watch allows 3 check-in misses from device (plus 1 min lag time)
+    // enrolls with default periodic reporting until newer 5 min interval is confirmed
+    sendEvent(name: "checkInterval", value: 3 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    refresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -0,0 +1,134 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+
+		capability "Actuator"
+		capability "Color Control"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Switch"
+		capability "Switch Level"
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"color control.setColor"
+			}
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main(["switch"])
+		details(["switch", "refresh"])
+	}
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def finalResult = zigbee.getEvent(description)
+	if (finalResult) {
+		log.debug finalResult
+		sendEvent(finalResult)
+	}
+	else {
+		def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+		log.trace "zigbeeMap : $zigbeeMap"
+
+		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				sendEvent(name: "hue", value: hueValue, displayed:false)
+			}
+			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				sendEvent(name: "saturation", value: saturationValue, displayed:false)
+			}
+		}
+		else {
+			log.info "DID NOT PARSE MESSAGE for description : $description"
+		}
+	}
+}
+
+def on() {
+	zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def off() {
+	zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def refresh() {
+	refreshAttributes() + configureAttributes()
+}
+
+def poll() {
+	refreshAttributes()
+}
+
+def configure() {
+	log.debug "Configuring Reporting and Bindings."
+	configureAttributes() + refreshAttributes()
+}
+
+def configureAttributes() {
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def refreshAttributes() {
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+}
+
+def setLevel(value) {
+	zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def setColor(value){
+	log.trace "setColor($value)"
+	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+}
+
+def setHue(value) {
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -123,7 +123,7 @@ def configureAttributes() {
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -141,10 +141,10 @@ def setColor(value){
 
 def setHue(value) {
     def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
     def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
 }

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -387,18 +387,18 @@ def getDeviceList() {
 	state.deviceDetail = [:]
 	state.deviceState = [:]
 
-	apiGet("/api/devicelist") { response ->
+	apiGet("/api/getstationsdata") { response ->
 		response.data.body.devices.each { value ->
 			def key = value._id
 			deviceList[key] = "${value.station_name}: ${value.module_name}"
 			state.deviceDetail[key] = value
             state.deviceState[key] = value.dashboard_data
-		}
-		response.data.body.modules.each { value ->
-			def key = value._id
-			deviceList[key] = "${state.deviceDetail[value.main_device].station_name}: ${value.module_name}"
-			state.deviceDetail[key] = value
-            state.deviceState[key] = value.dashboard_data
+			value.modules.each { value2 ->            
+                def key2 = value2._id
+                deviceList[key2] = "${value.station_name}: ${value2.module_name}"
+                state.deviceDetail[key2] = value2
+                state.deviceState[key2] = value2.dashboard_data            
+            }
 		}
 	}
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -131,10 +131,7 @@ def bulbDiscovery() {
 	def refreshInterval = 3
 	state.inBulbDiscovery = true
 	def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-		subscribe(bridge, "bulbList", bulbListData)
-	}
+
 	state.bridgeRefreshCount = 0
 	def allLightsFound = bulbsDiscovered() ?: [:]
 
@@ -259,10 +256,6 @@ Map bulbsDiscovered() {
 	return bulbmap
 }
 
-def bulbListData(evt) {
-	state.bulbs = evt.jsonData
-}
-
 Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
@@ -316,29 +309,6 @@ def uninstalled(){
 	state.username = null
 }
 
-// Handles events to add new bulbs
-def bulbListHandler(hub, data = "") {
-	def msg = "Bulbs list not processed. Only while in settings menu."
-    def bulbs = [:]
-	if (state.inBulbDiscovery) {
-        def logg = ""
-        log.trace "Adding bulbs to state..."
-        state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)
-        object.each { k,v ->
-            if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
-        }
-    }
-    def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
-	}
-	msg = "${bulbs.size()} bulbs found. ${bulbs}"
-	return msg
-}
-
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -570,11 +540,8 @@ void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
 	if (isValidSource(hubResponse.mac)) {
 		def body = hubResponse.json
 		if (!body?.state?.on) { //check if first time poll made it here by mistake
-			def bulbs = getHueBulbs()
 			log.debug "Adding bulbs to state!"
-			body.each { k, v ->
-				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
-			}
+			updateBulbState(body, hubResponse.hubId)
 		}
 	}
 }
@@ -690,11 +657,8 @@ def locationHandler(evt) {
 			} else {
 				//GET /api/${state.username}/lights response (application/json)
 				if (!body?.state?.on) { //check if first time poll made it here by mistake
-					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
-					body.each { k,v ->
-						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
-					}
+					updateBulbState(body, parsedEvent.hub)
 				}
 			}
 		}
@@ -754,7 +718,7 @@ private void checkBridgeStatus() {
 		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.key is Offline"
+				log.warn "Bridge $it.value.idNumber is Offline"
 				d.sendEvent(name: "status", value: "Offline")
 
 				state.bulbs?.each {
@@ -779,6 +743,31 @@ def isInBulbDiscovery() {
 	return state.inBulbDiscovery
 }
 
+private updateBulbState(messageBody, hub) {
+	def bulbs = getHueBulbs()
+
+	// Copy of bulbs used to locate old lights in state that are no longer on bridge
+	def toRemove = [:]
+	toRemove << bulbs
+
+	messageBody.each { k,v ->
+
+		if (v instanceof Map) {
+			if (bulbs[k] == null) {
+				bulbs[k] = [:]
+			}
+			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, remove: false]
+			toRemove.remove(k)
+		}
+	}
+
+	// Remove bulbs from state that are no longer discovered
+	toRemove.each { k,v ->
+		log.warn "${bulbs[k].name} no longer exists on bridge, removing"
+		bulbs.remove(k)
+	}
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -1173,7 +1162,14 @@ def setColor(childDevice, huesettings) {
 }
 
 def ping(childDevice) {
-	if (isOnline(getId(childDevice))) {
+	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
+		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
+			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
+			return "Bridge is Online"
+		} else {
+			return "Bridge is Offline"
+		}
+	} else if (isOnline(getId(childDevice))) {
 		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
 		return "Device is Online"
 	} else {
@@ -1198,7 +1194,7 @@ private poll() {
 }
 
 private isOnline(id) {
-	return (state.bulbs[id].online != null && state.bulbs[id].online) || state.bulbs[id].online == null
+	return (state.bulbs[id]?.online != null && state.bulbs[id]?.online) || state.bulbs[id]?.online == null
 }
 
 private put(path, body) {
@@ -1265,7 +1261,7 @@ def convertBulbListToMap() {
 	try {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
-			state.bulbs.unique {it.id}.each { bulb ->
+			state.bulbs?.unique {it.id}.each { bulb ->
 				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -97,7 +97,7 @@ def authPage() {
     def description = null
     if (!state.HarmonyAccessToken) {
 		if (!state.accessToken) {
-			log.debug "About to create access token"
+			log.debug "Harmony - About to create access token"
 			createAccessToken()
 		}
         description = "Click to enter Harmony Credentials"
@@ -141,13 +141,13 @@ def callback() {
 	def redirectUrl = null
 	if (params.authQueryString) {
 		redirectUrl = URLDecoder.decode(params.authQueryString.replaceAll(".+&redirect_url=", ""))
-		log.debug "redirectUrl: ${redirectUrl}"
+		log.debug "Harmony - redirectUrl: ${redirectUrl}"
 	} else {
-		log.warn "No authQueryString"
+		log.warn "Harmony - No authQueryString"
 	}
 
 	if (state.HarmonyAccessToken) {
-		log.debug "Access token already exists"
+		log.debug "Harmony - Access token already exists"
 		discovery()
 		success()
 	} else {
@@ -155,27 +155,27 @@ def callback() {
 		if (code) {
 			if (code.size() > 6) {
 				// Harmony code
-				log.debug "Exchanging code for access token"
+				log.debug "Harmony - Exchanging code for access token"
 				receiveToken(redirectUrl)
 			} else {
 				// Initiate the Harmony OAuth flow.
 				init()
 			}
 		} else {
-			log.debug "This code should be unreachable"
+			log.debug "Harmony - This code should be unreachable"
 			success()
 		}
 	}
 }
 
 def init() {
-	log.debug "Requesting Code"
+	log.debug "Harmony - Requesting Code"
 	def oauthParams = [client_id: "${appSettings.clientId}", scope: "remote", response_type: "code", redirect_uri: "${servercallbackUrl}" ]
 	redirect(location: "https://home.myharmony.com/oauth2/authorize?${toQueryString(oauthParams)}")
 }
 
 def receiveToken(redirectUrl = null) {
-	log.debug "receiveToken"
+	log.debug "Harmony - receiveToken"
     def oauthParams = [ client_id: "${appSettings.clientId}", client_secret: "${appSettings.clientSecret}", grant_type: "authorization_code", code: params.code ]
     def params = [
       uri: "https://home.myharmony.com/oauth2/token?${toQueryString(oauthParams)}",
@@ -186,7 +186,7 @@ def receiveToken(redirectUrl = null) {
         }
 	} catch (java.util.concurrent.TimeoutException e) {
     	fail(e)
-		log.warn "Connection timed out, please try again later."
+		log.warn "Harmony - Connection timed out, please try again later."
 	}
     discovery()
 	if (state.HarmonyAccessToken) {
@@ -310,7 +310,7 @@ def buildRedirectUrl(page) {
 
 def installed() {
 	if (!state.accessToken) {
-		log.debug "About to create access token"
+		log.debug "Harmony - About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -319,7 +319,7 @@ def installed() {
 
 def updated() {
 	if (!state.accessToken) {
-		log.debug "About to create access token"
+		log.debug "Harmony - About to create access token"
 		createAccessToken()
 	} else {
 		initialize()
@@ -330,9 +330,9 @@ def uninstalled() {
 	if (state.HarmonyAccessToken) {
 		try {
         	state.HarmonyAccessToken = ""
-        	log.debug "Success disconnecting Harmony from SmartThings"
+        	log.debug "Harmony - Success disconnecting Harmony from SmartThings"
 		} catch (groovyx.net.http.HttpResponseException e) {
-			log.error "Error disconnecting Harmony from SmartThings: ${e.statusCode}"
+			log.error "Harmony - Error disconnecting Harmony from SmartThings: ${e.statusCode}"
 		}
 	}
 }
@@ -341,7 +341,8 @@ def initialize() {
 	state.aux = 0
 	if (selectedhubs || selectedactivities) {
 		addDevice()
-        runEvery5Minutes("poll")
+    runEvery5Minutes("poll")
+    getActivityList()
 	}
 }
 
@@ -350,7 +351,7 @@ def getHarmonydevices() {
 }
 
 Map discoverDevices() {
-    log.trace "Discovering devices..."
+    log.trace "Harmony - Discovering devices..."
     discovery()
     if (getHarmonydevices() != []) {
         def devices = state.Harmonydevices.hubs
@@ -362,7 +363,7 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	it.value.response.data.activities.each {
+        	  it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
@@ -380,52 +381,52 @@ def discovery() {
 	try {
 		httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
 	    	if (response.status == 200) {
-            	log.debug "valid Token"
+            	log.debug "Harmony - valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
 	        } else {
-            	log.debug "Error: $response.status"
+            	log.debug "Harmony - Error: $response.status"
             }
 	    }
 	} catch (groovyx.net.http.HttpResponseException e) {
         if (e.statusCode == 401) { // token is expired
             state.remove("HarmonyAccessToken")
-            log.warn "Harmony Access token has expired"
+            log.warn "Harmony - Harmony Access token has expired"
         }
 	} catch (java.net.SocketTimeoutException e) {
-		log.warn "Connection to the hub timed out. Please restart the hub and try again."
+		log.warn "Harmony - Connection to the hub timed out. Please restart the hub and try again."
     state.resethub = true
  	} catch (e) {
-    log.info "Logitech Harmony - Error: $e"
+    log.info "Harmony - Error: $e"
 	}
     return null
 }
 
 def addDevice() {
-    log.trace "Adding Hubs"
+    log.trace "Harmony - Adding Hubs"
     selectedhubs.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyHubs.find { it.key == dni }
             d = addChildDevice("smartthings", "Logitech Harmony Hub C2C", dni, null, [label:"${newAction.value}"])
-            log.trace "created ${d.displayName} with id $dni"
+            log.trace "Harmony - Created ${d.displayName} with id $dni"
             poll()
         } else {
-            log.trace "found ${d.displayName} with id $dni already exists"
+            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
         }
     }
-    log.trace "Adding Activities"
+    log.trace "Harmony - Adding Activities"
     selectedactivities.each { dni ->
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
             if (newAction) {
 	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
-	            log.trace "created ${d.displayName} with id $dni"
+	            log.trace "Harmony - Created ${d.displayName} with id $dni"
 	            poll()
             }
         } else {
-            log.trace "found ${d.displayName} with id $dni already exists"
+            log.trace "Harmony - Found ${d.displayName} with id $dni already exists"
         }
     }
 }
@@ -455,28 +456,17 @@ def activity(dni,mode) {
 
 def activityResponse(response, data) {
   if (response.hasError()) {
-    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    log.error "Harmony - response has error: $response.errorMessage"
     if (response.status == 401) { // token is expired
       state.remove("HarmonyAccessToken")
-      log.warn "Logitech Harmony - Access token has expired"
+      log.warn "Harmony - Access token has expired"
     }
   } else {
-    def ResponseValues
-    try {
-      // json response already parsed into JSONElement object
-      ResponseValues = response.json
-    } catch (e) {
-      log.error "Logitech Harmony - error parsing json from response: $e"
-    }
-    if (ResponseValues) {
-      if (ResponseValues.code == 200) {
-        log.trace "Command sent succesfully"
-        poll()
-      } else {
-        log.trace "Command failed. Error: $response.data.code"
-      }
+    if (response.status == 200) {
+      log.trace "Harmony - Command sent succesfully"
+      poll()
     } else {
-      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+      log.trace "Harmony - Command failed. Error: $response.status"
     }
   }
 }
@@ -484,7 +474,6 @@ def activityResponse(response, data) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-    	  getActivityList()
         def tokenParam = [auth: state.HarmonyAccessToken]
         def params = [
             uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
@@ -493,16 +482,16 @@ def poll() {
         ]
         asynchttp_v1.get('pollResponse', params)
       } else {
-          log.warn "Logitech Harmony - Access token has expired"
+        log.warn "Harmony - Access token has expired"
       }
 }
 
 def pollResponse(response, data) {
 	if (response.hasError()) {
-    log.error "Logitech Harmony - response has error: $response.errorMessage"
+    log.error "Harmony - response has error: $response.errorMessage"
     if (response.status == 401) { // token is expired
       state.remove("HarmonyAccessToken")
-      log.warn "Logitech Harmony - Access token has expired"
+      log.warn "Harmony - Access token has expired"
     }
 	} else {
 			def ResponseValues
@@ -510,7 +499,7 @@ def pollResponse(response, data) {
 					// json response already parsed into JSONElement object
 					ResponseValues = response.json
 			} catch (e) {
-					log.error "Logitech Harmony - error parsing json from response: $e"
+					log.error "Harmony - error parsing json from response: $e"
 			}
 			if (ResponseValues) {
         def map = [:]
@@ -522,12 +511,17 @@ def pollResponse(response, data) {
                   if (it.value.response.data.currentAvActivity == "-1") {
                       hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
                   } else {
-                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
+                      def currentActivity
+                      def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
+                      if (activityDTH)
+                        currentActivity = activityDTH.device.displayName
+                      else
+                        currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
                       hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
                   }
               }
           } else {
-            log.trace "Logitech Harmony - error response: $it.value.message"
+            log.trace "Harmony - error response: $it.value.message"
           }
         }
         def activities = getChildDevices()
@@ -552,63 +546,43 @@ def pollResponse(response, data) {
             }
         }
 			} else {
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+					log.debug "Harmony - did not get json results from response body: $response.data"
 			}
 	}
 }
 
 def getActivityList() {
     if (state.HarmonyAccessToken) {
-      def tokenParam = [auth: state.HarmonyAccessToken]
-      def params = [
-  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
-  				headers: ["Accept": "application/json"],
-  				contentType: 'application/json'
-  		]
-  		asynchttp_v1.get('activityListResponse', params)
-    } else {
-        log.warn "Logitech Harmony - Access token has expired"
+        def Params = [auth: state.HarmonyAccessToken]
+        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
+        try {
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
+                response.data.hubs.each {
+                    def hub = getChildDevice("harmony-${it.key}")
+                    if (hub) {
+                    	def hubname = getHubName("${it.key}")
+                        def activities = []
+                        def aux = it.value.response.data.activities.size()
+                        if (aux >= 1) {
+                            activities = it.value.response.data.activities.collect {
+                                [id: it.key, name: it.value['name'], type: it.value['type']]
+                            }
+                            activities += [id: "off", name: "Activity OFF", type: "0"]
+                        }
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+					          }
+                }
+            }
+        } catch (groovyx.net.http.HttpResponseException e) {
+        	log.trace e
+        } catch (java.net.SocketTimeoutException e) {
+        	log.trace e
+		    } catch(Exception e) {
+        	log.trace e
+		    }
     }
 }
 
-def activityListResponse(response, data) {
-	if (response.hasError()) {
-			log.error "Logitech Harmony - response has error: $response.errorMessage"
-      if (response.status == 401) { // token is expired
-          state.remove("HarmonyAccessToken")
-          log.warn "Logitech Harmony - Access token has expired"
-      }
-	} else {
-			def ResponseValues
-			try {
-					// json response already parsed into JSONElement object
-					ResponseValues = response.json
-			} catch (e) {
-					log.error "Logitech Harmony - error parsing json from response: $e"
-			}
-			if (ResponseValues) {
-          	  ResponseValues.hubs.each {
-              def hub = getChildDevice("harmony-${it.key}")
-              if (hub) {
-                def hubname = getHubName("${it.key}")
-                  def activities = []
-                  def aux = it.value.response?.data.activities.size()
-                  if (aux >= 1) {
-                      activities = it.value.response.data.activities.collect {
-                          [id: it.key, name: it.value['name'], type: it.value['type']]
-                      }
-                      activities += [id: "off", name: "Activity OFF", type: "0"]
-                      log.trace activities
-                  }
-                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-              }
-          }
-			} else {
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
-			}
-	}
-}
-
 def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity
@@ -669,7 +643,7 @@ def sendNotification(msg) {
 
 def hookEventHandler() {
     // log.debug "In hookEventHandler method."
-    log.debug "request = ${request}"
+    log.debug "Harmony - request = ${request}"
 
     def json = request.JSON
 
@@ -678,14 +652,14 @@ def hookEventHandler() {
 }
 
 def listDevices() {
-	log.debug "getDevices, params: ${params}"
+	log.debug "Harmony - getDevices(), params: ${params}"
 	allDevices.collect {
 		deviceItem(it)
 	}
 }
 
 def getDevice() {
-	log.debug "getDevice, params: ${params}"
+	log.debug "Harmony - getDevice(), params: ${params}"
 	def device = allDevices.find { it.id == params.id }
 	if (!device) {
 		render status: 404, data: '{"msg": "Device not found"}'
@@ -698,7 +672,7 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-	log.debug "updateDevice, params: ${params}, request: ${data}"
+	log.debug "Harmony - updateDevice(), params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
@@ -766,7 +740,7 @@ def getDeviceCapabilityCommands(deviceCapabilities) {
 }
 
 def listSubscriptions() {
-	log.debug "listSubscriptions()"
+	log.debug "Harmony - listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
 		def deviceInfo = state[it.device.id]
 		def response = [
@@ -787,17 +761,17 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "Harmony - addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
 		def device = allDevices.find { it.id == data.deviceId }
 		if (device) {
 			if (!state.harmonyHubs) {
-				log.debug "Adding callbackUrl: $callbackUrl"
+				log.debug "Harmony - Adding callbackUrl: $callbackUrl"
 				state[device.id] = [callbackUrl: callbackUrl]
 			}
-			log.debug "Adding subscription"
+			log.debug "Harmony - Adding subscription"
 			def subscription = subscribe(device, attribute, deviceHandler)
 			if (!subscription || !subscription.eventSubscription) {
 				subscription = app.subscriptions?.find { it.device?.device && it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
@@ -825,7 +799,7 @@ def removeSubscription() {
 
 	log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
 	if (device) {
-		log.debug "Removing subscription for device: ${device.id}"
+		log.debug "Harmony - Removing subscription for device: ${device.id}"
 		state.remove(device.id)
 		unsubscribe(device)
 	}
@@ -849,17 +823,17 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
+      log.trace "Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {
 		if (deviceInfo.callbackUrl) {
 			sendToHarmony(evt, deviceInfo.callbackUrl)
 		} else {
-			log.warn "No callbackUrl set for device: ${evt.deviceId}"
+			log.warn "Harmony - No callbackUrl set for device: ${evt.deviceId}"
 		}
 	} else {
-		log.warn "No subscribed device found for device: ${evt.deviceId}"
+		log.warn "Harmony - No subscribed device found for device: ${evt.deviceId}"
 	}
 }
 
@@ -883,12 +857,12 @@ def sendToHarmony(evt, String callbackUrl) {
       body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
     ]
     try {
-        log.debug "Sending data to Harmony Cloud: $params"
+        log.debug "Harmony - Sending data to Harmony Cloud: $params"
         httpPostJson(params) { resp ->
-            log.debug "Harmony Cloud - Response: ${resp.status}"
+            log.debug "Harmony - Cloud Response: ${resp.status}"
         }
     } catch (e) {
-        log.error "Harmony Cloud - Something went wrong: $e"
+        log.error "Harmony - Cloud Something went wrong: $e"
     }
   }
 }
@@ -913,10 +887,10 @@ def activityCallback() {
 		if (data.errorCode == "200") {
 			device.setCurrentActivity(data.currentActivityId)
 		} else {
-			log.warn "Activity callback error: ${data}"
+			log.warn "Harmony - Activity callback error: ${data}"
 		}
 	} else {
-		log.warn "Activity callback sent to non-existant dni: ${params.dni}"
+		log.warn "Harmony - Activity callback sent to non-existant dni: ${params.dni}"
 	}
 	render status: 200, data: '{"msg": "Successfully received callbackUrl"}'
 }
@@ -950,13 +924,13 @@ def harmony() {
 }
 
 def deleteHarmony() {
-	log.debug "Trying to delete Harmony hub with mac: ${params.mac}"
+	log.debug "Harmony - Trying to delete Harmony hub with mac: ${params.mac}"
 	def harmonyHub = state.harmonyHubs?.find { it.mac == params.mac }
 	if (harmonyHub) {
-		log.debug "Deleting Harmony hub with mac: ${params.mac}"
+		log.debug "Harmony - Deleting Harmony hub with mac: ${params.mac}"
 		state.harmonyHubs.remove(harmonyHub)
 	} else {
-		log.debug "Couldn't find Harmony hub with mac: ${params.mac}"
+		log.debug "Harmony - Couldn't find Harmony hub with mac: ${params.mac}"
 	}
 	render status: 204, data: "{}"
 }