MSA-1494: control smart home

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -87,27 +87,16 @@ def beep() {
 	up to this long from the time you send the message to the time you hear a sound.
 	*/
 
-	// Used source endpoint of 0x02 because we are using smartthings manufacturer specific cluster.
 	[
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
 		"raw 0xFC05 {15 0A 11 00 00 15 01}",
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 		"delay 7000",
-		"raw 0xFC05 {15 0A 11 00 00 15 01}",
+		"raw 0xFC05 {15 0A 11 00 00 15 01}"
-		"delay 200",
-		"send 0x$zigbee.deviceNetworkId 0x02 0x$zigbee.endpointId",
 	]
 }
 

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -105,21 +105,11 @@ def parseDescriptionAsMap(description) {
 
 // Commands to device
 def on() {
-	[
+	'zcl on-off on'
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
 }
 
 def off() {
-	[
+	'zcl on-off off'
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
 }
 
 def setLevel(value) {

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -106,7 +106,7 @@ def configure() {
     schedule("0 0/5 * * * ? *", "healthPoll")
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/smartpower-outlet-v1.src/smartpower-outlet-v1.groovy

@@ -47,21 +47,9 @@ def parse(String description) {
 
 // Commands to device
 def on() {
-	[
+	'zcl on-off on'
-			'zcl on-off on',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-
-	]
-
 }
 
 def off() {
-	[
+	'zcl on-off off'
-			'zcl on-off off',
-			'delay 200',
-			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
-			'delay 500'
-	]
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -129,7 +129,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -180,9 +180,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
+		return celsius
 	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
+		return celsiusToFahrenheit(celsius) as Integer
 	}
 }
 
@@ -293,7 +293,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -194,9 +194,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
+		return celsius
 	} else {
-		return Math.round(celsiusToFahrenheit(celsius))
+		return celsiusToFahrenheit(celsius) as Integer
 	}
 }
 
@@ -304,7 +304,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -261,9 +261,9 @@ def updated() {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return Math.round(celsius)
+		return celsius
 		} else {
-			return Math.round(celsiusToFahrenheit(celsius))
+			return celsiusToFahrenheit(celsius) as Integer
 		}
 	}
 
@@ -402,7 +402,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -256,7 +256,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -265,7 +265,7 @@ def refresh()
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,42 +0,0 @@
-# Tyco Door Window Sensor
-
-
-
-Works with: 
-
-* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Battery** - defines device uses a battery
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (open/close)
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - can measure the device temperature
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Contact sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 min
-
-## Battery Specification
-
-3V CR2032 battery is required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
-Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
-It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -16,13 +16,12 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -230,42 +229,44 @@ private Map getContactResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
-}
-
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = [
+	[
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
-
-	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
+        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
+
+        "delay 500"
 	]
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -90,7 +90,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -134,7 +134,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -114,7 +114,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

devicetypes/smc/smc-door-window-sensor.src/smc-door-window-sensor.groovy

@@ -1,372 +0,0 @@
-/**
- *  SMCDW30-Z
- *
- *  Copyright 2016 Roy Chuang
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "SMC Door/Window Sensor", namespace: "SMC", author: "Roy Chuang") {
-		capability "Contact Sensor"
-		capability "Configuration"
-		capability "Battery"
-		capability "Temperature Measurement"
-		capability "Refresh"
-		capability "Tamper Alert"
-		capability "Sensor"		
-
-		command "enrollResponse"
-
-		fingerprint profileId: "0104", deviceId: "0402", deviceVersion: "00", inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "ACCTON", model: "SMCDW30-Z"
-	}
-
-	simulator {
-		status "closed": "zone status 0x0000 -- extended status 0x00"
-		status "open": "zone status 0x0001 -- extended status 0x00"
-		status "tamper alert with closed": "zone status 0x0004 -- extended status 0x00"
-		status "tamper alert with open": "zone status 0x0005 -- extended status 0x00"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-				"http://na.smc.com/site/wp-content/uploads/2016/06/SMCDW30-Z-Sensor-_Magnet-1-170x170.png"
-				])
-		}
-		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#53a7c0"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#ffffff"
-				attributeState "tamper alert with open", label:'tamper', icon:"st.contact.contact.open", backgroundColor:"#cc0000"
-				attributeState "tamper alert with closed", label:'tamper', icon:"st.contact.contact.closed", backgroundColor:"#cc0000"
-			}
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-			)
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		standardTile("rssi", "device.rssi", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "rssi", label:'${currentValue}% rssi', unit:""
-		}
-
-		main(["contact"])
-		details(["contact", "temperature", "battery", "refresh", "rssi"])
-	}
-}
-
-def parse(String description) {
-	log.debug "description: $description"
-
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
-	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
-}
-
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
-
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-
-			case 0x0b05:
-				log.debug 'Diag'
-				break
-		}
-	}
-
-	return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-	else if (descMap.cluster == "0B05" && descMap.attrId == "011d") {
-		resultMap = getRssiResult(Integer.parseInt(descMap.value, 16))
-    }
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0000': // Closed
-            resultMap = getContactResult('closed')
-			break
-
-		case '0x0001': // Open/Alarm1
-			resultMap = getContactResult('open')
-			break
-
-		case '0x0004': // Closed & Tamper
-			resultMap = getContactResult('tamper alert with closed')
-			break
-
-		case '0x0005': // Open & Tamper
-            resultMap = getContactResult('tamper alert with open')
-			break
-
-		default :
-			log.warn "ZoneStatus not support!"
-			break
-	}
-	return resultMap
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
-	}
-}
-
-private Map getBatteryResult(rawValue) {
-	log.info "Battery rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
-
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
-
-	def volts = rawValue / 10
-
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "${device.displayName} battery has too much power: (> 3.5) volts."
-		}
-		else {
-				def minVolts = 2.1
-				def maxVolts = 3.2
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "${device.displayName} battery was ${result.value}%"
-		}
-	}
-
-	return result
-}
-
-private Map getRssiResult(rawValue) {
-	log.info "RSSI rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
-
-	def result = [
-		name: 'rssi',
-		value: '--',
-		translatable: true
-	]
-    
-	def pct = rawValue / 255
-	def roundedPct = Math.round(pct * 100)
-	result.value = Math.min(100, roundedPct)
-	result.descriptionText = "${device.displayName} RSSI was ${result.value}%"
-
-	return result
-}
-
-private Map getTemperatureResult(value) {
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-    
-    log.info "Temperature is ${value}"
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = "${device.displayName} was ${value}°C"
-    else
-    	descriptionText = "${device.displayName} was ${value}°F"
-
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
-	]
-}
-
-private Map getContactResult(value) {
-	String descriptionText = "${device.displayName}"
-	return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
-	]
-}
-
-def refresh() {
-	log.debug "refresh called"
-	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 0x001 0x20", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 0xb05 0x11d", "delay 200"
-	]
-
-	return refreshCmds
-}
-
-def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	log.debug "${device.hub.zigbeeEui}. ${zigbeeEui}"
-
-	def configCmds = [
-		/* Write CIE */
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x0001 0x20 0x20 30 21600 {02}",		//Battery Voltage 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x0402 0 0x29 30 3600 {C800}",		//Temperature 1 hr
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
-
-		//Set long poll interval to 5 min
-		"raw 0x0020 {11 00 02 b0 04 00 00}", 
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
-	]
-	return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -454,23 +454,17 @@ def sendStopEvent(source) {
 		eventData.value += "cancelled"
 	}
 
-	// send 100% completion event
-	sendTimeRemainingEvent(100)
-
-	// send a non-displayed 0% completion to reset tiles
-	sendTimeRemainingEvent(0, false)
-
-	// send sessionStatus event last so the event feed is ordered properly
 	sendControllerEvent(eventData)
+	sendTimeRemainingEvent(0)
 }
 
-def sendTimeRemainingEvent(percentComplete, displayed = true) {
+def sendTimeRemainingEvent(percentComplete) {
 	log.trace "sendTimeRemainingEvent(${percentComplete})"
 
 	def percentCompleteEventData = [
 			name: "percentComplete",
 			value: percentComplete as int,
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(percentCompleteEventData)
@@ -480,7 +474,7 @@ def sendTimeRemainingEvent(percentComplete, displayed = true) {
 	def timeRemainingEventData = [
 			name: "timeRemaining",
 			value: displayableTime(timeRemaining),
-			displayed: displayed,
+			displayed: true,
 			isStateChange: true
 	]
 	sendControllerEvent(timeRemainingEventData)
@@ -614,6 +608,8 @@ private completion() {
 	handleCompletionMessaging()
 
 	handleCompletionModesAndPhrases()
+
+	sendTimeRemainingEvent(100)
 }
 
 private handleCompletionSwitches() {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -83,7 +83,7 @@ def bridgeDiscovery(params=[:])
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
 		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
+			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options
 		}
 	}
 }
@@ -333,9 +333,9 @@ def bulbListHandler(hub, data = "") {
     def bridge = null
 	if (selectedHue) {
 		bridge = getChildDevice(selectedHue)
-		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
 	}
-	msg = "${bulbs.size()} bulbs found. ${bulbs}"
+    bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
+    msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
 }
 
@@ -490,25 +490,24 @@ def ssdpBridgeHandler(evt) {
 		def host = ip + ":" + port
 		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
 		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
-		def dniReceived = "${parsedEvent.mac}"
+		def dni = "${parsedEvent.mac}"
-		def currentDni = dstate.mac
+		def d = getChildDevice(dni)
-		def d = getChildDevice(dniReceived)
 		def networkAddress = null
 		if (!d) {
-			// There might be a mismatch between bridge DNI and the actual bridge mac address, correct that
+			childDevices.each {
-			log.debug "Bridge with $dniReceived not found"
+				if (it.getDeviceDataByName("mac")) {
-			def bridge = childDevices.find { it.deviceNetworkId == currentDni }
+					def newDNI = "${it.getDeviceDataByName("mac")}"
-			if (bridge != null) {
+					d = it
-				log.warn "Bridge is set to ${bridge.deviceNetworkId}, updating to $dniReceived"
+					if (newDNI != it.deviceNetworkId) {
-				bridge.setDeviceNetworkId("${dniReceived}")
+						def oldDNI = it.deviceNetworkId
-				dstate.mac = dniReceived
+						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-				// Check to see if selectedHue is a valid bridge, otherwise update it
+						it.setDeviceNetworkId("${newDNI}")
-				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+						if (oldDNI == selectedHue) {
-				if (isSelectedValid == null) {
+							app.updateSetting("selectedHue", newDNI)
-					log.warn "Correcting selectedHue in state"
+						}
-					app.updateSetting("selectedHue", dniReceived)
+						doDeviceSync()
+					}
 				}
-				doDeviceSync()
 			}
 		} else {
 			updateBridgeStatus(d)
@@ -526,18 +525,6 @@ def ssdpBridgeHandler(evt) {
 				d.sendEvent(name:"networkAddress", value: host)
 				d.updateDataValue("networkAddress", host)
 			}
-			if (dstate.mac != dniReceived) {
-				log.warn "Correcting bridge mac address in state"
-				dstate.mac = dniReceived
-			}
-			if (selectedHue != dniReceived) {
-				// Check to see if selectedHue is a valid bridge, otherwise update it
-				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
-				if (isSelectedValid == null) {
-					log.warn "Correcting selectedHue in state"
-					app.updateSetting("selectedHue", dniReceived)
-				}
-			}
 		}
 	}
 }
@@ -963,14 +950,6 @@ private handleCommandResponse(body) {
  * @return empty array
  */
 private handlePoll(body) {
-	// Used to track "unreachable" time
-	// Device is considered "offline" if it has been in the "unreachable" state for
-	// 11 minutes (e.g. two poll intervals)
-	// Note, Hue Bridge marks devices as "unreachable" often even when they accept commands
-	Calendar time11 = Calendar.getInstance()
-	time11.add(Calendar.MINUTE, -11)
-	Calendar currentTime = Calendar.getInstance()
-
 	def bulbs = getChildDevices()
 	for (bulb in body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
@@ -980,10 +959,7 @@ private handlePoll(body) {
 					// light just came back online, notify device watch
 					def lastActivity = now()
 					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
-					log.debug "$device is Online"
 				}
-				// Mark light as "online"
-				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
 
 				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
@@ -993,18 +969,9 @@ private handlePoll(body) {
 					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
 				}
 			} else {
-				if (state.bulbs[bulb.key]?.unreachableSince == null) {
+				state.bulbs[bulb.key]?.online = false
-					// Store the first time where device was reported as "unreachable"
+				log.warn "$device is not reachable by Hue bridge"
-					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
+				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
-				} else if (state.bulbs[bulb.key]?.online) {
-					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
-					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
-						log.warn "$device went Offline"
-						state.bulbs[bulb.key]?.online = false
-						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
-					}
-				}
-				log.warn "$device may not reachable by Hue bridge"
 			}
 		}
 	}
@@ -1039,6 +1006,9 @@ def hubVerification(bodytext) {
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
@@ -1048,6 +1018,9 @@ def on(childDevice) {
 def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
@@ -1057,6 +1030,9 @@ def off(childDevice) {
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 1 - 254
     def level
@@ -1081,6 +1057,10 @@ def setLevel(childDevice, percent) {
 def setSaturation(childDevice, percent) {
 	log.debug "Executing 'setSaturation($percent)'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
+
 	updateInProgress()
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
@@ -1093,6 +1073,9 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
@@ -1105,6 +1088,9 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
@@ -1116,6 +1102,9 @@ def setColorTemperature(childDevice, huesettings) {
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 
     def value = [:]
@@ -1131,7 +1120,7 @@ def setColor(childDevice, huesettings) {
 			value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
 		if (huesettings.saturation != null)
 			value.sat = Math.min(Math.round(huesettings.saturation * 254 / 100), 254)
-	} else if (huesettings.hex != null) {
+	} else if (huesettings.hex != null && false) {
 		// For now ignore model to get a consistent color if same color is set across multiple devices
 		// def model = state.bulbs[getId(childDevice)]?.modelid
 		// value.xy = calculateXY(huesettings.hex, model)
@@ -1235,7 +1224,7 @@ private getBridgeIP() {
     	if (d) {
         	if (d.getDeviceDataByName("networkAddress"))
             	host =  d.getDeviceDataByName("networkAddress")
-        else
+            else
         		host = d.latestState('networkAddress').stringValue
         }
         if (host == null || host == "") {
@@ -1674,7 +1663,7 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 }
 
 /**
- * Converts an RGB color in hex to HSV/HSB.
+ * Converts an RGB color in hex to HSV.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param colorStr color value in hex (#ff03d3)
@@ -1684,32 +1673,32 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 def hexToHsv(colorStr){
 	def r = Integer.valueOf( colorStr.substring( 1, 3 ), 16 ) / 255
 	def g = Integer.valueOf( colorStr.substring( 3, 5 ), 16 ) / 255
-	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255
+	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255;
 
 	def max = Math.max(Math.max(r, g), b)
 	def min = Math.min(Math.min(r, g), b)
 
-	def h, s, v = max
+	def h, s, v = max;
 
-	def d = max - min
+	def d = max - min;
-	s = max == 0 ? 0 : d / max
+	s = max == 0 ? 0 : d / max;
 
 	if(max == min){
-		h = 0
+		h = 0;
 	}else{
 		switch(max){
-			case r: h = (g - b) / d + (g < b ? 6 : 0); break
+			case r: h = (g - b) / d + (g < b ? 6 : 0); break;
-			case g: h = (b - r) / d + 2; break
+			case g: h = (b - r) / d + 2; break;
-			case b: h = (r - g) / d + 4; break
+			case b: h = (r - g) / d + 4; break;
 		}
 		h /= 6;
 	}
 
-	return [Math.round(h * 100), Math.round(s * 100), Math.round(v * 100)]
+	return [(h * 100).round(), (s * 100).round(), (v * 100).round()];
 }
 
 /**
- * Converts HSV/HSB color to RGB in hex.
+ * Converts HSV color to RGB in hex.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param  hue hue 0-100
@@ -1724,11 +1713,11 @@ def hsvToHex(hue, sat, value = 100){
 	def s = sat / 100
 	def v = value / 100
 
-	def i = Math.floor(h * 6)
+	def i = Math.floor(h * 6);
-	def f = h * 6 - i
+	def f = h * 6 - i;
-	def p = v * (1 - s)
+	def p = v * (1 - s);
-	def q = v * (1 - f * s)
+	def q = v * (1 - f * s);
-	def t = v * (1 - (1 - f) * s)
+	def t = v * (1 - (1 - f) * s);
 
 	switch (i % 6) {
 		case 0:
@@ -1764,9 +1753,9 @@ def hsvToHex(hue, sat, value = 100){
 	}
 
 	// Converting float components to int components.
-	def r1 = String.format("%02X", (int) (r * 255.0f))
+	def r1 = String.format("%02X", (int) (r * 255.0f));
-	def g1 = String.format("%02X", (int) (g * 255.0f))
+	def g1 = String.format("%02X", (int) (g * 255.0f));
-	def b1 = String.format("%02X", (int) (b * 255.0f))
+	def b1 = String.format("%02X", (int) (b * 255.0f));
 
 	return "#$r1$g1$b1"
 }

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -34,7 +34,6 @@
  *  locks                | lock              | lock, unlock                | locked, unlocked
  *  ---------------------+-------------------+-----------------------------+------------------------------------
  */
-include 'asynchttp_v1'
 
 definition(
     name: "Logitech Harmony (Connect)",
@@ -110,28 +109,26 @@ def authPage() {
 		//device discovery request every 5 //25 seconds
 		int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
 		state.deviceRefreshCount = deviceRefreshCount + 1
-		def refreshInterval = 5
+		def refreshInterval = 3
 
 		def huboptions = state.HarmonyHubs ?: []
 		def actoptions = state.HarmonyActivities ?: []
 
 		def numFoundHub = huboptions.size() ?: 0
-    def numFoundAct = actoptions.size() ?: 0
+        def numFoundAct = actoptions.size() ?: 0
-
 		if((deviceRefreshCount % 5) == 0) {
 			discoverDevices()
 		}
-
 		return dynamicPage(name:"Credentials", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
 			section("Please wait while we discover your Harmony Hubs and Activities. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, submitOnChange: true, options:huboptions
+				input "selectedhubs", "enum", required:false, title:"Select Harmony Hubs (${numFoundHub} found)", multiple:true, options:huboptions
 			}
-      // Virtual activity flag
+            // Virtual activity flag
-      if (numFoundHub > 0 && numFoundAct > 0 && true)
+            if (numFoundHub > 0 && numFoundAct > 0 && true)
 			section("You can also add activities as virtual switches for other convenient integrations") {
-				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, submitOnChange: true, options:actoptions
+				input "selectedactivities", "enum", required:false, title:"Select Harmony Activities (${numFoundAct} found)", multiple:true, options:actoptions
 			}
-    if (state.resethub)
+            if (state.resethub)
 			section("Connection to the hub timed out. Please restart the hub and try again.") {}
 		}
     }
@@ -383,6 +380,8 @@ def discovery() {
             	log.debug "valid Token"
                 state.Harmonydevices = response.data
                 state.resethub = false
+                getActivityList()
+                poll()
 	        } else {
             	log.debug "Error: $response.status"
             }
@@ -431,182 +430,142 @@ def addDevice() {
 }
 
 def activity(dni,mode) {
-    def tokenParam = [auth: state.HarmonyAccessToken]
+    def Params = [auth: state.HarmonyAccessToken]
-    def url
+    def msg = "Command failed"
+    def url = ''
     if (dni == "all") {
-        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(tokenParam)}"
+        url = "https://home.myharmony.com/cloudapi/activity/off?${toQueryString(Params)}"
     } else {
         def aux = dni.split('-')
         def hubId = aux[1]
         if (mode == "hub" || (aux.size() <= 2) || (aux[2] == "off")){
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(tokenParam)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/off?${toQueryString(Params)}"
         } else {
-          def activityId = aux[2]
+            def activityId = aux[2]
-        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(tokenParam)}"
+        	url = "https://home.myharmony.com/cloudapi/hub/${hubId}/activity/${activityId}/${mode}?${toQueryString(Params)}"
         }
 	}
-  def params = [
+	try {
-      uri: url,
+    	httpPostJson(uri: url) { response ->
-      contentType: 'application/json'
+        	if (response.data.code == 200 || dni == "all") {
-  ]
+            	msg = "Command sent succesfully"
-  asynchttp_v1.post('activityResponse', params)
+            	state.aux = 0
-  return "Command Sent"
+            } else {
-}
+            	msg = "Command failed. Error: $response.data.code"
-
+            }
-def activityResponse(response, data) {
+		}
-  if (response.hasError()) {
+    } catch (groovyx.net.http.HttpResponseException ex) {
-    log.error "Logitech Harmony - response has error: $response.errorMessage"
+        log.error ex
-    if (response.status == 401) { // token is expired
+        if (state.aux == 0) {
-      state.remove("HarmonyAccessToken")
+        	state.aux = 1
-      log.warn "Logitech Harmony - Access token has expired"
+        	activity(dni,mode)
+        } else {
+        	msg = ex
+            state.aux = 0
+        }
+    } catch(Exception ex) {
+    	msg = ex
     }
-  } else {
+    runIn(10, "poll", [overwrite: true])
-    def ResponseValues
+    return msg
-    try {
-      // json response already parsed into JSONElement object
-      ResponseValues = response.json
-    } catch (e) {
-      log.error "Logitech Harmony - error parsing json from response: $e"
-    }
-    if (ResponseValues) {
-      if (ResponseValues.code == 200) {
-        log.trace "Command sent succesfully"
-        poll()
-      } else {
-        log.trace "Command failed. Error: $response.data.code"
-      }
-    } else {
-      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
-    }
-  }
 }
 
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
     	  getActivityList()
-        def tokenParam = [auth: state.HarmonyAccessToken]
+        def Params = [auth: state.HarmonyAccessToken]
-        def params = [
+        def url = "https://home.myharmony.com/cloudapi/state?${toQueryString(Params)}"
-            uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
+        try {
-            headers: ["Accept": "application/json"],
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-            contentType: 'application/json'
+                def map = [:]
-        ]
+                response.data.hubs.each {
-        asynchttp_v1.get('pollResponse', params)
+		            if (it.value.message == "OK") {
-      } else {
+	                    map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
-          log.warn "Logitech Harmony - Access token has expired"
+	                    def hub = getChildDevice("harmony-${it.key}")
-      }
+	                    if (hub) {
-}
+	                        if (it.value.response.data.currentAvActivity == "-1") {
-
+	                            hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
-def pollResponse(response, data) {
+	                        } else {
-	if (response.hasError()) {
+	                            def currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
-    log.error "Logitech Harmony - response has error: $response.errorMessage"
+	                            hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
-    if (response.status == 401) { // token is expired
+	                        }
-      state.remove("HarmonyAccessToken")
+	                    }
-      log.warn "Logitech Harmony - Access token has expired"
+	                } else {
-    }
+		                log.trace it.value.message
-	} else {
+	                }
-			def ResponseValues
+                }
-			try {
+                def activities = getChildDevices()
-					// json response already parsed into JSONElement object
+                def activitynotrunning = true
-					ResponseValues = response.json
+                activities.each { activity ->
-			} catch (e) {
+                    def act = activity.deviceNetworkId.split('-')
-					log.error "Logitech Harmony - error parsing json from response: $e"
+                    if (act.size() > 2) {
-			}
+                        def aux = map.find { it.key == act[1] }
-			if (ResponseValues) {
+                        if (aux) {
-        def map = [:]
+                            def aux2 = aux.value.split(',')
-        ResponseValues.hubs.each {
+                            def childDevice = getChildDevice(activity.deviceNetworkId)
-        if (it.value.message == "OK") {
+                            if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-              map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
+                                childDevice?.sendEvent(name: "switch", value: "on")
-              def hub = getChildDevice("harmony-${it.key}")
+                                if (aux2[1] == "1")
-              if (hub) {
+                                    runIn(5, "poll", [overwrite: true])
-                  if (it.value.response.data.currentAvActivity == "-1") {
+                            } else {
-                      hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
+                                childDevice?.sendEvent(name: "switch", value: "off")
-                  } else {
+                                if (aux2[1] == "3")
-                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
+                                    runIn(5, "poll", [overwrite: true])
-                      hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
+                            }
-                  }
+                        }
-              }
-          } else {
-            log.trace "Logitech Harmony - error response: $it.value.message"
-          }
-        }
-        def activities = getChildDevices()
-        def activitynotrunning = true
-        activities.each { activity ->
-            def act = activity.deviceNetworkId.split('-')
-            if (act.size() > 2) {
-                def aux = map.find { it.key == act[1] }
-                if (aux) {
-                    def aux2 = aux.value.split(',')
-                    def childDevice = getChildDevice(activity.deviceNetworkId)
-                    if ((act[2] == aux2[0]) && (aux2[1] == "1" || aux2[1] == "2")) {
-                        childDevice?.sendEvent(name: "switch", value: "on")
-                        if (aux2[1] == "1")
-                            runIn(5, "poll", [overwrite: true])
-                    } else {
-                        childDevice?.sendEvent(name: "switch", value: "off")
-                        if (aux2[1] == "3")
-                            runIn(5, "poll", [overwrite: true])
                     }
                 }
+                return "Poll completed $map - $state.hubs"
             }
+        } catch (groovyx.net.http.HttpResponseException e) {
+              if (e.statusCode == 401) { // token is expired
+                  state.remove("HarmonyAccessToken")
+                  log.warn "Harmony Access token has expired"
+              }
+        } catch (java.net.SocketTimeoutException e) {
+        	log.warn "Connection to the hub timed out. Please restart the hub and try again."
+              state.resethub = true
+        } catch (e) {
+        	log.info "Logitech Harmony - Error: $e"
         }
-			} else {
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
-			}
-	}
-}
-
-def getActivityList() {
-    if (state.HarmonyAccessToken) {
-      def tokenParam = [auth: state.HarmonyAccessToken]
-      def params = [
-  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
-  				headers: ["Accept": "application/json"],
-  				contentType: 'application/json'
-  		]
-  		asynchttp_v1.get('activityListResponse', params)
-    } else {
-        log.warn "Logitech Harmony - Access token has expired"
     }
 }
 
-def activityListResponse(response, data) {
+
-	if (response.hasError()) {
+def getActivityList() {
-			log.error "Logitech Harmony - response has error: $response.errorMessage"
+	// GET ACTIVITY'S NAME
-      if (response.status == 401) { // token is expired
+    if (state.HarmonyAccessToken) {
-          state.remove("HarmonyAccessToken")
+        def Params = [auth: state.HarmonyAccessToken]
-          log.warn "Logitech Harmony - Access token has expired"
+        def url = "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(Params)}"
-      }
+        try {
-	} else {
+            httpGet(uri: url, headers: ["Accept": "application/json"]) {response ->
-			def ResponseValues
+                response.data.hubs.each {
-			try {
+                    def hub = getChildDevice("harmony-${it.key}")
-					// json response already parsed into JSONElement object
+                    if (hub) {
-					ResponseValues = response.json
+                    	def hubname = getHubName("${it.key}")
-			} catch (e) {
+                        def activities = []
-					log.error "Logitech Harmony - error parsing json from response: $e"
+                        def aux = it.value.response.data.activities.size()
-			}
+                        if (aux >= 1) {
-			if (ResponseValues) {
+                            activities = it.value.response.data.activities.collect {
-          	  ResponseValues.hubs.each {
+                                [id: it.key, name: it.value['name'], type: it.value['type']]
-              def hub = getChildDevice("harmony-${it.key}")
+                            }
-              if (hub) {
+                            activities += [id: "off", name: "Activity OFF", type: "0"]
-                def hubname = getHubName("${it.key}")
+                            log.trace activities
-                  def activities = []
+                        }
-                  def aux = it.value.response?.data.activities.size()
+                        hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-                  if (aux >= 1) {
+					}
-                      activities = it.value.response.data.activities.collect {
+                }
-                          [id: it.key, name: it.value['name'], type: it.value['type']]
+            }
-                      }
+        } catch (groovyx.net.http.HttpResponseException e) {
-                      activities += [id: "off", name: "Activity OFF", type: "0"]
+        	log.trace e
-                      log.trace activities
+        } catch (java.net.SocketTimeoutException e) {
-                  }
+        	log.trace e
-                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+		} catch(Exception e) {
-              }
+        	log.trace e
-          }
+		}
-			} else {
+    }
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+	return activity
-			}
-	}
 }
 
 def getActivityName(activity,hubId) {
@@ -787,7 +746,7 @@ def addSubscription() {
 	def attribute = data.attributeName
 	def callbackUrl = data.callbackUrl
 
-	log.debug "Logitech Harmony - addSubscription, params: ${params}, request: ${data}"
+	log.debug "addSubscription, params: ${params}, request: ${data}"
 	if (!attribute) {
 		render status: 400, data: '{"msg": "attributeName is required"}'
 	} else {
@@ -849,7 +808,6 @@ def deviceHandler(evt) {
 	def deviceInfo = state[evt.deviceId]
 	if (state.harmonyHubs) {
 		state.harmonyHubs.each { harmonyHub ->
-      log.trace "Logitech Harmony - Sending data to $harmonyHub.name"
 			sendToHarmony(evt, harmonyHub.callbackUrl)
 		}
 	} else if (deviceInfo) {

smartapps/thehomeremote-homeremote/home-remote.src/home-remote.groovy

@@ -0,0 +1,800 @@
+/**
+ *  Home Remote
+ *
+ *  Copyright 2015 The Home Remote
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Home Remote",
+    namespace: "thehomeremote.homeremote",
+    author: "The Home Remote",
+    description: "Web service that enables communication between the Home Remote app and a SmartThings hub.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "The Home Remote", displayLink: "http://thehomeremote.com/"])
+
+
+preferences {
+    section() {
+	input "accelerationSensors", "capability.accelerationSensor",title: "Acceleration Sensors", multiple: true, required: false
+	input "alarms", "capability.alarm",title: "Alarms", multiple: true, required: false
+	input "batteries", "capability.battery",title: "Batteries", multiple: true, required: false
+	input "beacons", "capability.beacon",title: "Beacons", multiple: true, required: false
+	input "buttonGroup", "capability.button",title: "Buttons", multiple: true, required: false
+	input "carbonMonoxideDetectors", "capability.carbonMonoxideDetector",title: "CO Detectors", multiple: true, required: false
+	input "colorControls", "capability.colorControl",title: "Color Lights", multiple: true, required: false
+	input "contactSensors", "capability.contactSensor",title: "Contact Sensors", multiple: true, required: false
+	input "doorControls", "capability.doorControl",title: "Door Controllers", multiple: true, required: false
+	input "energyMeters", "capability.energyMeter",title: "Energy Meters", multiple: true, required: false
+	input "illuminanceMeasurements", "capability.illuminanceMeasurement",title: "Illuminance Sensors", multiple: true, required: false
+	input "imageCaptures", "capability.imageCapture",title: "Cameras", multiple: true, required: false
+	input "locks", "capability.lock",title: "Locks", multiple: true, required: false
+	input "mediaControllers", "capability.mediaController",title: "Media Controllers", multiple: true, required: false
+	input "momentaries", "capability.momentary",title: "Momentary Buttons", multiple: true, required: false
+	input "motionSensors", "capability.motionSensor",title: "Motion Sensors", multiple: true, required: false
+	input "musicPlayers", "capability.musicPlayer",title: "Music Players", multiple: true, required: false
+	input "powerMeters", "capability.powerMeter",title: "Power Meters", multiple: true, required: false
+	input "presenceSensors", "capability.presenceSensor",title: "Presence Sensors", multiple: true, required: false
+	input "relativeHumidityMeasurements", "capability.relativeHumidityMeasurement",title: "Humidity Sensors", multiple: true, required: false
+	input "relaySwitches", "capability.relaySwitch",title: "Relays", multiple: true, required: false
+	input "signalStrengths", "capability.signalStrength",title: "Signal Strengths", multiple: true, required: false
+	input "sleepSensors", "capability.sleepSensor",title: "Sleep Sensors", multiple: true, required: false
+	input "smokeDetectors", "capability.smokeDetector",title: "Smoke Detectors", multiple: true, required: false
+	input "speechSyntheses", "capability.speechSynthesis",title: "Speech Syntheses", multiple: true, required: false
+	input "stepSensors", "capability.stepSensor",title: "Step Sensors", multiple: true, required: false
+	input "switches", "capability.switch",title: "Switches", multiple: true, required: false
+	input "switchLevels", "capability.switchLevel",title: "Dimmers", multiple: true, required: false
+	input "temperatureMeasurements", "capability.temperatureMeasurement",title: "Temperature Sensors", multiple: true, required: false
+	input "thermostats", "capability.thermostat",title: "Thermostats", multiple: true, required: false
+	input "threeAxes", "capability.threeAxis",title: "Three axis Sensors", multiple: true, required: false
+	input "tones", "capability.tone",title: "Tones", multiple: true, required: false
+	input "touchSensors", "capability.touchSensor",title: "Touch Sensors", multiple: true, required: false
+	input "valves", "capability.valve",title: "Valves", multiple: true, required: false
+	input "waterSensors", "capability.waterSensor",title: "Water Sensors", multiple: true, required: false
+    }
+}
+
+mappings {
+  path("/GetCurrentValues") {
+    action: [
+      GET: "getCurrentValues"
+    ]
+  }
+  path("/GetCurrentValuesWithDisplayName") {
+    action: [
+      GET: "getCurrentValuesWithDisplayName"
+    ]
+  }
+  path("/GetRoutines") {
+    action: [
+      GET: "getRoutines"
+    ]
+  }
+  path("/ExecuteCommand") {
+    action: [
+      PUT: "executeCommand"
+    ]
+  }
+  path("/ExecuteRoutine") {
+    action: [
+      PUT: "executeRoutine"
+    ]
+  }
+}
+
+def getCurrentValues() {
+    def resp = []    
+        
+ 	accelerationSensors.each {
+      resp << [id: it.id, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
+    }
+
+	alarms.each {
+      resp << [id: it.id, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
+    }
+
+	batteries.each {
+      resp << [id: it.id, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
+    }
+
+	beacons.each {
+      resp << [id: it.id, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	buttonGroup.each {
+      resp << [id: it.id, capability: "Button", attribute: "button", value: it.currentValue("button")]
+    }
+
+	carbonMonoxideDetectors.each {
+      resp << [id: it.id, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
+    }
+
+	contactSensors.each {
+      resp << [id: it.id, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	doorControls.each {
+      resp << [id: it.id, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
+    }
+
+	energyMeters.each {
+      resp << [id: it.id, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
+    }
+
+	illuminanceMeasurements.each {
+      resp << [id: it.id, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
+    }
+
+	imageCaptures.each {
+      resp << [id: it.id, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
+    }
+
+	locks.each {
+      resp << [id: it.id, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
+    }
+
+	motionSensors.each {
+      resp << [id: it.id, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
+    }
+
+	powerMeters.each {
+      resp << [id: it.id, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
+    }
+
+	presenceSensors.each {
+      resp << [id: it.id, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	relativeHumidityMeasurements.each {
+      resp << [id: it.id, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
+    }
+
+	relaySwitches.each {
+      resp << [id: it.id, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
+    }
+
+	sleepSensors.each {
+      resp << [id: it.id, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
+    }
+
+	smokeDetectors.each {
+      resp << [id: it.id, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
+    }
+
+	switches.each {
+      resp << [id: it.id, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	switchLevels.each {
+      resp << [id: it.id, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
+    }
+
+	temperatureMeasurements.each {
+      resp << [id: it.id, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
+    }
+
+	//Commented out on 7/23/2016.   This randomly started throwing number format exceptions with either my ecobee or Lyric thermostat.
+	//thermostats.each {
+    //  resp << [id: it.id, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
+    //}
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
+    }
+
+	threeAxes.each {
+      resp << [id: it.id, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
+    }
+
+	touchSensors.each {
+      resp << [id: it.id, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
+    }
+
+	valves.each {
+      resp << [id: it.id, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	waterSensors.each {
+      resp << [id: it.id, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
+    }
+   
+   	//resp << [id: 0, capability: "Heartbeat", attribute: "heartbeat", value: String.valueOf(state.heartbeat)]
+    
+    state.heartbeat = !state.heartbeat
+    
+    return resp
+}
+
+def getCurrentValuesWithDisplayName() {
+    def resp = []    
+        
+ 	accelerationSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
+    }
+
+	alarms.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
+    }
+
+	batteries.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
+    }
+
+	beacons.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	buttonGroup.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Button", attribute: "button", value: it.currentValue("button")]
+    }
+
+	carbonMonoxideDetectors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
+    }
+
+	contactSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	doorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
+    }
+
+	energyMeters.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
+    }
+
+	illuminanceMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
+    }
+
+	imageCaptures.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
+    }
+
+	locks.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
+    }
+
+	motionSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
+    }
+
+	powerMeters.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
+    }
+
+	presenceSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	relativeHumidityMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
+    }
+
+	relaySwitches.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
+    }
+
+	sleepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
+    }
+
+	smokeDetectors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
+    }
+
+	switches.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	switchLevels.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
+    }
+
+	temperatureMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
+    }
+
+	//Commented out on 7/23/2016.   This randomly started throwing number format exceptions with either my ecobee or Lyric thermostat.
+	//thermostats.each {
+    //  resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
+    //}
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
+    }
+
+	threeAxes.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
+    }
+
+	touchSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
+    }
+
+	valves.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	waterSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
+    }
+   
+    momentaries.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Momentary", attribute: "", value: ""]
+    }
+   
+    //resp << [id: 0, displayName: "Heartbeat", capability: "Heartbeat", attribute: "heartbeat", value: state.heartbeat]
+    
+    return resp
+}
+
+def getDevices(capability){
+
+	def result
+
+	switch (capability) {
+    	case "Alarm":
+        	result = alarms
+        	break
+    	case "ColorControl":
+        	result = colorControls
+        	break
+    	case "DoorControl":
+        	result = doorControls
+        	break
+        case "ImageCapture":
+        	result = imageCaptures
+        	break
+    	case "Lock":
+        	result = locks
+        	break
+        case "MediaController":
+        	result = mediaControllers
+        	break
+    	case "Momentary":
+        	result = momentaries
+        	break
+        case "MusicPlayer":
+        	result = musicPlayers
+        	break
+        case "RelaySwitch":
+        	result = relaySwitches
+        	break
+    	case "SpeechSynthesis":
+        	result = speechSyntheses
+        	break
+    	case "Switch":
+        	result = switches
+        	break
+        case "SwitchLevel":
+        	result = switchLevels
+        	break
+    	case "Thermostat":
+        	result = thermostats
+        	break
+		case "ThermostatCoolingSetpoint":
+        	result = thermostatCoolingSetpoints
+        	break
+    	case "ThermostatFanMode":
+        	result = thermostatFanModes
+        	break
+        case "ThermostatHeatingSetpoint":
+        	result = thermostatHeatingSetpoints
+        	break
+    	case "ThermostatMode":
+        	result = thermostatModes
+        	break
+    	case "Tone":
+        	result = tones
+        	break
+        case "Valve":
+        	result = valves
+        	break     
+    	default:
+        	result = valves
+	}
+	return result
+}
+
+def getDoorControlCommand(value){
+	def result
+	switch (value) {
+        case "closed":
+        	result = "close"
+        	break
+    	case "open":
+        	result = "open"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getLockCommand(value){
+	def result
+	switch (value) {
+        case "locked":
+        	result = "lock"
+        	break
+    	case "unlocked":
+        	result = "unlock"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getMuteCommand(value){
+	def result
+	switch (value) {
+        case "muted":
+        	result = "mute"
+        	break
+    	case "unmuted":
+        	result = "unmute"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getContactCommand(value){
+	def result
+	switch (value) {
+        case "closed":
+        	result = "close"
+        	break
+    	case "open":
+        	result = "open"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getRoutines() {
+	return location.helloHome?.getPhrases()*.label
+}
+
+def getThermostatFanModeCommand(value){
+	def result
+	switch (value) {
+        case "on":
+        	result = "fanOn"
+        	break
+    	case "auto":
+        	result = "fanAuto"
+        	break
+    	case "circulate":
+        	result = "fanCirculate"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+void executeCommand() {    
+    def deviceId = request.JSON?.deviceId
+    def capability = request.JSON?.capability
+    def attribute = request.JSON?.attribute 
+    def value = request.JSON?.value    
+    if (deviceId) {
+		def devices = getDevices(capability)
+        def command
+        def valueIsParameter = false
+        def valueIsInteger = false
+        switch (attribute) {    	       	
+        	case "hue":
+        		command = "setHue"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break
+    		case "saturation":
+        		command = "setSaturation"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break
+    		case "color":
+        		command = "setColor"
+                def rgb = hexToRgb(value)
+                def hsl = rgbToHSL(rgb)
+                value = [hue:hsl.h.toInteger(), saturation:hsl.s.toInteger()]
+                valueIsParameter = true				
+        		break
+			case "level":
+        		command = "setLevel"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break            
+        	case "heatingSetpoint":
+        		command = "setHeatingSetpoint"
+                valueIsParameter = true
+        		break    
+       		case "coolingSetpoint":
+        		command = "setCoolingSetpoint"
+                valueIsParameter = true
+        		break
+          	case "currentActivity":
+        		command = "startActivity"
+                valueIsParameter = true
+        		break  
+ 	  		case "door":
+        		command = getDoorControlCommand(value)
+        		break    
+      		case "lock":
+        		command = getLockCommand(value)
+        		break           
+      		case "mute":
+        		command = getMuteCommand(value)
+        		break         
+      		case "thermostatFanMode":
+        		command = getThermostatFanModeCommand(value)
+        		break         
+       		case "thermostatMode":
+        		if (value == "emergency heat") {
+                	command = "emergencyHeat"
+           		}
+                else
+                {
+                    command = value
+                }
+        		break     
+      		case "contact":
+        		command = getContactCommand(value)
+        		break
+    		default:
+        		command = value
+		}
+        devices.each {
+        	if (it.id == deviceId) {
+                // check that the device supports the specified command
+                // If not, return an error using httpError, providing a HTTP status code.
+            	if (!it.hasCommand(command)) {
+                	httpError(501, "$command is not a valid command for the device")
+            	}                
+                if(valueIsParameter){
+                	if(valueIsInteger){
+                		it."$command"(value as int)
+                	}
+                	else{
+                		it."$command"(value)
+                	}   
+                }
+                else{
+                	it."$command"()
+                }   
+           }       
+        }
+    }
+}
+
+void executeRoutine() {   
+	def routine = request.JSON?.routine
+    location.helloHome?.execute(routine)
+}
+
+def rgbToHSL(rgb) {
+	def r = rgb.r / 255
+    def g = rgb.g / 255
+    def b = rgb.b / 255
+    def h = 0
+    def s = 0
+    def l = 0
+    
+    def var_min = [r,g,b].min()
+    def var_max = [r,g,b].max()
+    def del_max = var_max - var_min
+    
+    l = (var_max + var_min) / 2
+    
+    if (del_max == 0) {
+            h = 0
+            s = 0
+    } else {
+    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
+        else { s = del_max / (2 - var_max - var_min) }
+
+        def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
+        def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
+        def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
+
+        if (r == var_max) { h = del_b - del_g } 
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
+        else if (b == var_max) { h = (2 / 3) + del_g - del_r }
+        
+		if (h < 0) { h += 1 }
+        if (h > 1) { h -= 1 }
+	}
+    def hsl = [:]    
+    hsl = [h: h * 100, s: s * 100, l: l]
+    
+    hsl
+}
+
+def hexToRgb(colorHex) {
+	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
+    def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
+    def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
+    
+    def colorData = [:]
+    colorData = [r: rrInt, g: ggInt, b: bbInt]
+    colorData
+}
+
+def installed() {
+	state.heartbeat = false
+}
+
+def updated() {
+	state.heartbeat = false
+}