Merge pull request #1316 from SmartThingsCommunity/staging

Rolling up staging to prod for deployment

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -106,7 +106,7 @@ def configure() {
     schedule("0 0/5 * * * ? *", "healthPoll")
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint","number"
-		attribute "thermostatStatus","string"
+		attribute "thermostatSetpoint", "number"
+		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "number"
+		attribute "deviceTemperatureUnit", "string"
 	}
 
 	tiles {

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,9 +7,11 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
+		capability "Health Check"
+
 		attribute "networkAddress", "string"
-        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-        // Possible values "Online" or "Offline"
+		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+		// Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -42,6 +44,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -70,13 +76,8 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
-					} else {
-						// Sending Bulbs List to parent"
-						if (parent.isInBulbDiscovery())
-							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				}
-				else if (contentType?.contains("xml")) {
+				} else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -85,3 +86,7 @@ def parse(description) {
 	}
 	results
 }
+
+def ping() {
+	log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes
@@ -174,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent.manualRefresh()
+    parent?.manualRefresh()
 }
 
 def verifyPercent(percent) {

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -129,7 +129,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -293,7 +293,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -304,7 +304,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -402,7 +402,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -256,7 +256,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -265,7 +265,7 @@ def refresh()
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -1,42 +0,0 @@
-# Tyco Door Window Sensor
-
-
-
-Works with: 
-
-* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-
-## Capabilities
-
-* **Battery** - defines device uses a battery
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (open/close)
-* **Refresh** - _refresh()_ command for status updates
-* **Temperature Measurement** - can measure the device temperature
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Contact sensor with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime for Zigbee device. 
-This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 min
-
-## Battery Specification
-
-3V CR2032 battery is required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
-Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
-It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -16,13 +16,12 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
-		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -230,42 +229,44 @@ private Map getContactResult(value) {
 	]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
-}
-
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	def refreshCmds = [
+	[
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
-
-	return refreshCmds + enrollResponse()
 }
 
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def enrollCmds = [
+	def configCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
+        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
+
+        "delay 500"
 	]
-    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -90,7 +90,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -134,7 +134,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -114,7 +114,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

devicetypes/smc/smc-door-window-sensor.src/smc-door-window-sensor.groovy

@@ -1,372 +0,0 @@
-/**
- *  SMCDW30-Z
- *
- *  Copyright 2016 Roy Chuang
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	definition (name: "SMC Door/Window Sensor", namespace: "SMC", author: "Roy Chuang") {
-		capability "Contact Sensor"
-		capability "Configuration"
-		capability "Battery"
-		capability "Temperature Measurement"
-		capability "Refresh"
-		capability "Tamper Alert"
-		capability "Sensor"		
-
-		command "enrollResponse"
-
-		fingerprint profileId: "0104", deviceId: "0402", deviceVersion: "00", inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "ACCTON", model: "SMCDW30-Z"
-	}
-
-	simulator {
-		status "closed": "zone status 0x0000 -- extended status 0x00"
-		status "open": "zone status 0x0001 -- extended status 0x00"
-		status "tamper alert with closed": "zone status 0x0004 -- extended status 0x00"
-		status "tamper alert with open": "zone status 0x0005 -- extended status 0x00"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-				"http://na.smc.com/site/wp-content/uploads/2016/06/SMCDW30-Z-Sensor-_Magnet-1-170x170.png"
-				])
-		}
-		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
-			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
-		}
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#53a7c0"
-				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#ffffff"
-				attributeState "tamper alert with open", label:'tamper', icon:"st.contact.contact.open", backgroundColor:"#cc0000"
-				attributeState "tamper alert with closed", label:'tamper', icon:"st.contact.contact.closed", backgroundColor:"#cc0000"
-			}
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-				backgroundColors:[
-					[value: 31, color: "#153591"],
-					[value: 44, color: "#1e9cbb"],
-					[value: 59, color: "#90d2a7"],
-					[value: 74, color: "#44b621"],
-					[value: 84, color: "#f1d801"],
-					[value: 95, color: "#d04e00"],
-					[value: 96, color: "#bc2323"]
-				]
-			)
-		}
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		standardTile("rssi", "device.rssi", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "rssi", label:'${currentValue}% rssi', unit:""
-		}
-
-		main(["contact"])
-		details(["contact", "temperature", "battery", "refresh", "rssi"])
-	}
-}
-
-def parse(String description) {
-	log.debug "description: $description"
-
-	Map map = [:]
-	if (description?.startsWith('catchall:')) {
-		map = parseCatchAllMessage(description)
-	}
-	else if (description?.startsWith('read attr -')) {
-		map = parseReportAttributeMessage(description)
-	}
-	else if (description?.startsWith('temperature: ')) {
-		map = parseCustomMessage(description)
-	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
-	log.debug "Parse returned $map"
-	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
-}
-
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
-
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-
-			case 0x0b05:
-				log.debug 'Diag'
-				break
-		}
-	}
-
-	return resultMap
-}
-
-private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
-}
-
-private Map parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	log.debug "Desc Map: $descMap"
-
-	Map resultMap = [:]
-	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		resultMap = getTemperatureResult(value)
-	}
-	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
-	}
-	else if (descMap.cluster == "0B05" && descMap.attrId == "011d") {
-		resultMap = getRssiResult(Integer.parseInt(descMap.value, 16))
-    }
-
-	return resultMap
-}
-
-private Map parseCustomMessage(String description) {
-	Map resultMap = [:]
-	if (description?.startsWith('temperature: ')) {
-		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
-		resultMap = getTemperatureResult(value)
-	}
-	return resultMap
-}
-
-private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
-
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0000': // Closed
-            resultMap = getContactResult('closed')
-			break
-
-		case '0x0001': // Open/Alarm1
-			resultMap = getContactResult('open')
-			break
-
-		case '0x0004': // Closed & Tamper
-			resultMap = getContactResult('tamper alert with closed')
-			break
-
-		case '0x0005': // Open & Tamper
-            resultMap = getContactResult('tamper alert with open')
-			break
-
-		default :
-			log.warn "ZoneStatus not support!"
-			break
-	}
-	return resultMap
-}
-
-def getTemperature(value) {
-	def celsius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celsius
-	} else {
-		return celsiusToFahrenheit(celsius) as Integer
-	}
-}
-
-private Map getBatteryResult(rawValue) {
-	log.info "Battery rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
-
-	def result = [
-		name: 'battery',
-		value: '--',
-		translatable: true
-	]
-
-	def volts = rawValue / 10
-
-	if (rawValue == 0 || rawValue == 255) {}
-	else {
-		if (volts > 3.5) {
-			result.descriptionText = "${device.displayName} battery has too much power: (> 3.5) volts."
-		}
-		else {
-				def minVolts = 2.1
-				def maxVolts = 3.2
-				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
-				result.value = Math.min(100, roundedPct)
-				result.descriptionText = "${device.displayName} battery was ${result.value}%"
-		}
-	}
-
-	return result
-}
-
-private Map getRssiResult(rawValue) {
-	log.info "RSSI rawValue = ${rawValue}"
-	def linkText = getLinkText(device)
-
-	def result = [
-		name: 'rssi',
-		value: '--',
-		translatable: true
-	]
-    
-	def pct = rawValue / 255
-	def roundedPct = Math.round(pct * 100)
-	result.value = Math.min(100, roundedPct)
-	result.descriptionText = "${device.displayName} RSSI was ${result.value}%"
-
-	return result
-}
-
-private Map getTemperatureResult(value) {
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-    
-    log.info "Temperature is ${value}"
-    def descriptionText
-    if ( temperatureScale == 'C' )
-    	descriptionText = "${device.displayName} was ${value}°C"
-    else
-    	descriptionText = "${device.displayName} was ${value}°F"
-
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
-	]
-}
-
-private Map getContactResult(value) {
-	String descriptionText = "${device.displayName}"
-	return [
-		name: 'contact',
-		value: value,
-		descriptionText: descriptionText,
-        translatable: true
-	]
-}
-
-def refresh() {
-	log.debug "refresh called"
-	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 0x001 0x20", "delay 200",
-		"st rattr 0x${device.deviceNetworkId} 1 0xb05 0x11d", "delay 200"
-	]
-
-	return refreshCmds
-}
-
-def configure() {
-	sendEvent(name: "checkInterval", value: 7200, displayed: false)
-
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	log.debug "${device.hub.zigbeeEui}. ${zigbeeEui}"
-
-	def configCmds = [
-		/* Write CIE */
-		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x0001 0x20 0x20 30 21600 {02}",		//Battery Voltage 6 hrs
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
-
-		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x0402 0 0x29 30 3600 {C800}",		//Temperature 1 hr
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
-
-		//Set long poll interval to 5 min
-		"raw 0x0020 {11 00 02 b0 04 00 00}", 
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
-	]
-	return configCmds + refresh() // send refresh cmds as part of config
-}
-
-def enrollResponse() {
-	log.debug "Sending enroll response"
-	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
-		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -131,10 +131,7 @@ def bulbDiscovery() {
 	def refreshInterval = 3
 	state.inBulbDiscovery = true
 	def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-		subscribe(bridge, "bulbList", bulbListData)
-	}
+
 	state.bridgeRefreshCount = 0
 	def allLightsFound = bulbsDiscovered() ?: [:]
 
@@ -259,10 +256,6 @@ Map bulbsDiscovered() {
 	return bulbmap
 }
 
-def bulbListData(evt) {
-	state.bulbs = evt.jsonData
-}
-
 Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
@@ -316,29 +309,6 @@ def uninstalled(){
 	state.username = null
 }
 
-// Handles events to add new bulbs
-def bulbListHandler(hub, data = "") {
-	def msg = "Bulbs list not processed. Only while in settings menu."
-    def bulbs = [:]
-	if (state.inBulbDiscovery) {
-        def logg = ""
-        log.trace "Adding bulbs to state..."
-        state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)
-        object.each { k,v ->
-            if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
-        }
-    }
-    def bridge = null
-	if (selectedHue) {
-		bridge = getChildDevice(selectedHue)
-		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
-	}
-	msg = "${bulbs.size()} bulbs found. ${bulbs}"
-	return msg
-}
-
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -570,11 +540,8 @@ void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
 	if (isValidSource(hubResponse.mac)) {
 		def body = hubResponse.json
 		if (!body?.state?.on) { //check if first time poll made it here by mistake
-			def bulbs = getHueBulbs()
 			log.debug "Adding bulbs to state!"
-			body.each { k, v ->
-				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
-			}
+			updateBulbState(body, hubResponse.hubId)
 		}
 	}
 }
@@ -690,11 +657,8 @@ def locationHandler(evt) {
 			} else {
 				//GET /api/${state.username}/lights response (application/json)
 				if (!body?.state?.on) { //check if first time poll made it here by mistake
-					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
-					body.each { k,v ->
-						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
-					}
+					updateBulbState(body, parsedEvent.hub)
 				}
 			}
 		}
@@ -754,7 +718,7 @@ private void checkBridgeStatus() {
 		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.key is Offline"
+				log.warn "Bridge $it.value.idNumber is Offline"
 				d.sendEvent(name: "status", value: "Offline")
 
 				state.bulbs?.each {
@@ -779,6 +743,31 @@ def isInBulbDiscovery() {
 	return state.inBulbDiscovery
 }
 
+private updateBulbState(messageBody, hub) {
+	def bulbs = getHueBulbs()
+
+	// Copy of bulbs used to locate old lights in state that are no longer on bridge
+	def toRemove = [:]
+	toRemove << bulbs
+
+	messageBody.each { k,v ->
+
+		if (v instanceof Map) {
+			if (bulbs[k] == null) {
+				bulbs[k] = [:]
+			}
+			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, remove: false]
+			toRemove.remove(k)
+		}
+	}
+
+	// Remove bulbs from state that are no longer discovered
+	toRemove.each { k,v ->
+		log.warn "${bulbs[k].name} no longer exists on bridge, removing"
+		bulbs.remove(k)
+	}
+}
+
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -1173,7 +1162,14 @@ def setColor(childDevice, huesettings) {
 }
 
 def ping(childDevice) {
-	if (isOnline(getId(childDevice))) {
+	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
+		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
+			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
+			return "Bridge is Online"
+		} else {
+			return "Bridge is Offline"
+		}
+	} else if (isOnline(getId(childDevice))) {
 		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
 		return "Device is Online"
 	} else {