MSA-1503: Multisensor 6

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -97,14 +97,13 @@ def refresh() {
 }
 
 def healthPoll() {
-    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    runEvery5Minutes("healthPoll")
+    schedule("0 0/5 * * * ? *", "healthPoll")
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -31,13 +31,13 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "thermostatSetpoint", "number"
-		attribute "thermostatStatus", "string"
+		attribute "thermostatSetpoint","number"
+		attribute "thermostatStatus","string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
-		attribute "deviceTemperatureUnit", "string"
+		attribute "deviceTemperatureUnit", "number"
 	}
 
 	tiles {

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -7,11 +7,9 @@
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Hue Bridge", namespace: "smartthings", author: "SmartThings") {
-		capability "Health Check"
-
 		attribute "networkAddress", "string"
-		// Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
-		// Possible values "Online" or "Offline"
+        // Used to indicate if bridge is reachable or not, i.e. is the bridge connected to the network
+        // Possible values "Online" or "Offline"
 		attribute "status", "string"
 		// Id is the number on the back of the hub, Hue uses last six digits of Mac address
 		// This is also used in the Hue application as ID
@@ -44,10 +42,6 @@ metadata {
 	}
 }
 
-void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
-}
-
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"
@@ -76,8 +70,13 @@ def parse(description) {
 					def bulbs = new groovy.json.JsonSlurper().parseText(msg.body)
 					if (bulbs.state) {
 						log.info "Bridge response: $msg.body"
+					} else {
+						// Sending Bulbs List to parent"
+						if (parent.isInBulbDiscovery())
+							log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
-				} else if (contentType?.contains("xml")) {
+				}
+				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
 					parent.hubVerification(device.hub.id, msg.body)
 				}
@@ -86,7 +85,3 @@ def parse(description) {
 	}
 	results
 }
-
-def ping() {
-	log.debug "${parent.ping(this)}"
-}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -174,7 +174,7 @@ void setColorTemperature(value) {
 
 void refresh() {
     log.debug "Executing 'refresh'"
-    parent?.manualRefresh()
+    parent.manualRefresh()
 }
 
 def verifyPercent(percent) {

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -1,37 +0,0 @@
-# Nyce Door/Window Sensor (Open/Close Sensor)
-
-
-
-Works with:
-
-* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Contact Sensor** - can detect contact (with possible values - open/closed)
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-A Category C2 Nyce Door/Window sensor that has 12min check-in interval
-
-## Battery Specification
-
-One 3V CR2032 battery required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
-* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,26 +19,25 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-		capability "Battery"
+    	capability "Battery"
 		capability "Configuration"
-		capability "Contact Sensor"
+        capability "Contact Sensor"
 		capability "Refresh"
-		capability "Health Check"
-
-		command "enrollResponse"
-
-
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+        
+        command "enrollResponse"
+ 
+ 
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
-
+ 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -274,28 +273,23 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
-}
-
 def configure() {
-	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def enrollCmds = [
+	def configCmds = [
+			//battery reporting and heartbeat
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
+
+
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
-	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
+	return configCmds
 }
 
 def enrollResponse() {
@@ -340,8 +334,7 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	def refreshCmds = [
+	[
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
-	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -16,7 +16,7 @@
 
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 
 		capability "Three Axis"
 		capability "Battery"

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
 
         capability "Actuator"
         capability "Color Temperature"

smartapps/lights-in-my-home/lights-in-my-home.src/lights-in-my-home.groovy

@@ -1,96 +0,0 @@
-/**
- *  Lights In My Home
- *
- *  Copyright 2016 Maciej Urbanski
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Lights In My Home",
-    namespace: "lights-in-my-home",
-    author: "Maciej Urbanski",
-    description: "Controll lights in my home",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	preferences {
-  		section ("Allow external service to control these things...") {
-    		input "switches", "capability.switch", multiple: true, required: true
-  		}
-	}
-}
-
-mappings {
-  path("/switches") {
-    action: [
-      GET: "listSwitches"
-    ]
-  }
-  path("/switches/:command") {
-    action: [
-      PUT: "updateSwitches"
-    ]
-  }
-}
-
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-// returns a list like
-// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
-def listSwitches() {
-    def resp = []
-    switches.each {
-      resp << [name: it.displayName, value: it.currentValue("switch")]
-    }
-    return resp
-}
-
-void updateSwitches() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    // all switches have the command
-    // execute the command on all switches
-    // (note we can do this on the array - the command will be invoked on every element
-    switch(command) {
-        case "on":
-            switches.on()
-            break
-        case "off":
-            switches.off()
-            break
-        default:
-            httpError(400, "$command is not a valid command for all switches specified")
-    }
-}
-
-def initialize() {
-	// TODO: subscribe to attributes, devices, locations, etc.
-}
-
-// TODO: implement event handlers

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -131,7 +131,10 @@ def bulbDiscovery() {
 	def refreshInterval = 3
 	state.inBulbDiscovery = true
 	def bridge = null
-
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+		subscribe(bridge, "bulbList", bulbListData)
+	}
 	state.bridgeRefreshCount = 0
 	def allLightsFound = bulbsDiscovered() ?: [:]
 
@@ -256,6 +259,10 @@ Map bulbsDiscovered() {
 	return bulbmap
 }
 
+def bulbListData(evt) {
+	state.bulbs = evt.jsonData
+}
+
 Map getHueBulbs() {
 	state.bulbs = state.bulbs ?: [:]
 }
@@ -309,6 +316,29 @@ def uninstalled(){
 	state.username = null
 }
 
+// Handles events to add new bulbs
+def bulbListHandler(hub, data = "") {
+	def msg = "Bulbs list not processed. Only while in settings menu."
+    def bulbs = [:]
+	if (state.inBulbDiscovery) {
+        def logg = ""
+        log.trace "Adding bulbs to state..."
+        state.bridgeProcessedLightList = true
+        def object = new groovy.json.JsonSlurper().parseText(data)
+        object.each { k,v ->
+            if (v instanceof Map)
+                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
+        }
+    }
+    def bridge = null
+	if (selectedHue) {
+		bridge = getChildDevice(selectedHue)
+		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
+	}
+	msg = "${bulbs.size()} bulbs found. ${bulbs}"
+	return msg
+}
+
 private upgradeDeviceType(device, newHueType) {
 	def deviceType = getDeviceType(newHueType)
 
@@ -540,8 +570,11 @@ void lightsHandler(physicalgraph.device.HubResponse hubResponse) {
 	if (isValidSource(hubResponse.mac)) {
 		def body = hubResponse.json
 		if (!body?.state?.on) { //check if first time poll made it here by mistake
+			def bulbs = getHueBulbs()
 			log.debug "Adding bulbs to state!"
-			updateBulbState(body, hubResponse.hubId)
+			body.each { k, v ->
+				bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub: hubResponse.hubId]
+			}
 		}
 	}
 }
@@ -657,8 +690,11 @@ def locationHandler(evt) {
 			} else {
 				//GET /api/${state.username}/lights response (application/json)
 				if (!body?.state?.on) { //check if first time poll made it here by mistake
+					def bulbs = getHueBulbs()
 					log.debug "Adding bulbs to state!"
-					updateBulbState(body, parsedEvent.hub)
+					body.each { k,v ->
+						bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:parsedEvent.hub]
+					}
 				}
 			}
 		}
@@ -718,7 +754,7 @@ private void checkBridgeStatus() {
 		    }
 
 			if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
-				log.warn "Bridge $it.value.idNumber is Offline"
+				log.warn "Bridge $it.key is Offline"
 				d.sendEvent(name: "status", value: "Offline")
 
 				state.bulbs?.each {
@@ -743,31 +779,6 @@ def isInBulbDiscovery() {
 	return state.inBulbDiscovery
 }
 
-private updateBulbState(messageBody, hub) {
-	def bulbs = getHueBulbs()
-
-	// Copy of bulbs used to locate old lights in state that are no longer on bridge
-	def toRemove = [:]
-	toRemove << bulbs
-
-	messageBody.each { k,v ->
-
-		if (v instanceof Map) {
-			if (bulbs[k] == null) {
-				bulbs[k] = [:]
-			}
-			bulbs[k] << [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, remove: false]
-			toRemove.remove(k)
-		}
-	}
-
-	// Remove bulbs from state that are no longer discovered
-	toRemove.each { k,v ->
-		log.warn "${bulbs[k].name} no longer exists on bridge, removing"
-		bulbs.remove(k)
-	}
-}
-
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////
@@ -1162,14 +1173,7 @@ def setColor(childDevice, huesettings) {
 }
 
 def ping(childDevice) {
-	if (childDevice.device?.deviceNetworkId?.equalsIgnoreCase(selectedHue)) {
-		if (childDevice.device?.currentValue("status")?.equalsIgnoreCase("Online")) {
-			childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Bridge is reachable", displayed: false, isStateChange: true)
-			return "Bridge is Online"
-		} else {
-			return "Bridge is Offline"
-		}
-	} else if (isOnline(getId(childDevice))) {
+	if (isOnline(getId(childDevice))) {
 		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
 		return "Device is Online"
 	} else {

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -362,7 +362,7 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	  it.value.response.data.activities.each {
+        	it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
@@ -461,11 +461,22 @@ def activityResponse(response, data) {
       log.warn "Logitech Harmony - Access token has expired"
     }
   } else {
-    if (response.status == 200) {
-      log.trace "Command sent succesfully"
-      poll()
+    def ResponseValues
+    try {
+      // json response already parsed into JSONElement object
+      ResponseValues = response.json
+    } catch (e) {
+      log.error "Logitech Harmony - error parsing json from response: $e"
+    }
+    if (ResponseValues) {
+      if (ResponseValues.code == 200) {
+        log.trace "Command sent succesfully"
+        poll()
+      } else {
+        log.trace "Command failed. Error: $response.data.code"
+      }
     } else {
-      log.trace "Command failed. Error: $response.status"
+      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
     }
   }
 }
@@ -473,6 +484,7 @@ def activityResponse(response, data) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
+    	  getActivityList()
         def tokenParam = [auth: state.HarmonyAccessToken]
         def params = [
             uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
@@ -481,7 +493,7 @@ def poll() {
         ]
         asynchttp_v1.get('pollResponse', params)
       } else {
-        log.warn "Logitech Harmony - Access token has expired"
+          log.warn "Logitech Harmony - Access token has expired"
       }
 }
 
@@ -510,12 +522,7 @@ def pollResponse(response, data) {
                   if (it.value.response.data.currentAvActivity == "-1") {
                       hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
                   } else {
-                      def currentActivity
-                      def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
-                      if (activityDTH)
-                        currentActivity = activityDTH.device.displayName
-                      else
-                        currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
+                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
                       hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
                   }
               }
@@ -550,6 +557,58 @@ def pollResponse(response, data) {
 	}
 }
 
+def getActivityList() {
+    if (state.HarmonyAccessToken) {
+      def tokenParam = [auth: state.HarmonyAccessToken]
+      def params = [
+  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
+  				headers: ["Accept": "application/json"],
+  				contentType: 'application/json'
+  		]
+  		asynchttp_v1.get('activityListResponse', params)
+    } else {
+        log.warn "Logitech Harmony - Access token has expired"
+    }
+}
+
+def activityListResponse(response, data) {
+	if (response.hasError()) {
+			log.error "Logitech Harmony - response has error: $response.errorMessage"
+      if (response.status == 401) { // token is expired
+          state.remove("HarmonyAccessToken")
+          log.warn "Logitech Harmony - Access token has expired"
+      }
+	} else {
+			def ResponseValues
+			try {
+					// json response already parsed into JSONElement object
+					ResponseValues = response.json
+			} catch (e) {
+					log.error "Logitech Harmony - error parsing json from response: $e"
+			}
+			if (ResponseValues) {
+          	  ResponseValues.hubs.each {
+              def hub = getChildDevice("harmony-${it.key}")
+              if (hub) {
+                def hubname = getHubName("${it.key}")
+                  def activities = []
+                  def aux = it.value.response?.data.activities.size()
+                  if (aux >= 1) {
+                      activities = it.value.response.data.activities.collect {
+                          [id: it.key, name: it.value['name'], type: it.value['type']]
+                      }
+                      activities += [id: "off", name: "Activity OFF", type: "0"]
+                      log.trace activities
+                  }
+                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
+              }
+          }
+			} else {
+					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+			}
+	}
+}
+
 def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity