MSA-1515: Schalge dour lock

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -655,60 +655,55 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	if (mode == "off" || mode == "auto") {
-		log.warn "this mode: $mode does not allow alterSetpoint"
-	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint")
-		def coolingSetpoint = device.currentValue("coolingSetpoint")
-		def deviceId = device.deviceNetworkId.split(/\./).last()
+	def targetHeatingSetpoint
+	def targetCoolingSetpoint
 
-		def targetHeatingSetpoint
-		def targetCoolingSetpoint
-
-		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxHeatOnly"){
-			if (temp.value > coolingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = coolingSetpoint
-			}
-		} else if (mode == "cool") {
-			//enforce limits before sending request to cloud
-			if (temp.value < heatingSetpoint){
-				targetHeatingSetpoint = temp.value
-				targetCoolingSetpoint = temp.value
-			} else {
-				targetHeatingSetpoint = heatingSetpoint
-				targetCoolingSetpoint = temp.value
-			}
-		}
-
-		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	//step1: check thermostatMode, enforce limits before sending request to cloud
+	if (mode == "heat" || mode == "auxHeatOnly"){
+		if (temp.value > coolingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
 		} else {
-			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxHeatOnly"){
-				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-			} else if (mode == "cool") {
-				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
-			}
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = coolingSetpoint
+		}
+	} else if (mode == "cool") {
+		//enforce limits before sending request to cloud
+		if (temp.value < heatingSetpoint){
+			targetHeatingSetpoint = temp.value
+			targetCoolingSetpoint = temp.value
+		} else {
+			targetHeatingSetpoint = heatingSetpoint
+			targetCoolingSetpoint = temp.value
 		}
-		generateStatusEvent()
 	}
+
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+	} else {
+		log.error "Error alterSetpoint()"
+		if (mode == "heat" || mode == "auxHeatOnly"){
+			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+		} else if (mode == "cool") {
+			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+		}
+	}
+	generateStatusEvent()
 }
 
 def generateStatusEvent() {

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -12,13 +12,13 @@
  *
  *  It's Too Hot
  *
- *  Author: SmartThings - zahir
+ *  Author: SmartThings
  */
 definition(
     name: "It's Too Hot",
     namespace: "smartthings",
     author: "SmartThings",
-    description: "Monitor the temperature and when it rises above your setting get a notification and/or turn off underfloor heating.",
+    description: "Monitor the temperature and when it rises above your setting get a notification and/or turn on an A/C unit or fan.",
     category: "Convenience",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/its-too-hot.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/its-too-hot@2x.png"
@@ -37,7 +37,7 @@ preferences {
             input "phone1", "phone", title: "Send a Text Message?", required: false
         }
     }
-	section("Turn off which A/C or fan...") {
+	section("Turn on which A/C or fan...") {
 		input "switch1", "capability.switch", required: false
 	}
 }
@@ -73,9 +73,9 @@ def temperatureHandler(evt) {
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
 			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
-			def tempScale = location.temperatureScale ?: "C"
+			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
-			switch1?.off()
+			switch1?.on()
 		}
 	}
 }
@@ -98,4 +98,4 @@ private send(msg) {
     }
 
     log.debug msg
-}
+}