MSA-1543: try

Add health check for:
* DVCSMP-2134 ZLL white color temperature bulb
* DVCSMP-2135 ZLL dimmer bulb

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -21,6 +24,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
@@ -96,7 +100,38 @@ def poll() {
     refresh()
 }
 
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = refresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
+def configure() {
+    log.debug "configure()"
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
 }

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+import groovy.transform.Field
+
+@Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
     definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
@@ -22,6 +25,7 @@ metadata {
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
+        capability "Health Check"
 
         attribute "colorName", "string"
         command "setGenericName"
@@ -96,9 +100,41 @@ def poll() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    return zigbee.levelRefresh()
+}
+
+def healthPoll() {
+    log.debug "healthPoll()"
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
+    cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
+}
+
+def configureHealthCheck() {
+    Integer hcIntervalMinutes = 12
+    if (!hasConfiguredHealthCheck) {
+        log.debug "Configuring Health Check, Reporting"
+        unschedule("healthPoll")
+        runEvery5Minutes("healthPoll")
+        // Device-Watch allows 2 check-in misses from device
+        sendEvent(name: "checkInterval", value: hcIntervalMinutes * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+        hasConfiguredHealthCheck = true
+    }
+}
+
 def configure() {
-    log.debug "Configuring Reporting and Bindings."
+    log.debug "configure()"
+    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
+}
+
+def updated() {
+    log.debug "updated()"
+    configureHealthCheck()
 }
 
 def setColorTemperature(value) {

devicetypes/yoyogs7/mobilephone.src/mobilephone.groovy

@@ -0,0 +1,118 @@
+/**
+ *  MobilePHone
+ *
+ *  Copyright 2016 Max Azemard
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "MobilePHone", namespace: "YoyoGS7", author: "Max Azemard") {
+		capability "Speech Recognition"
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+		capability "Thermostat Fan Mode"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Operating State"
+		capability "Thermostat Schedule"
+		capability "Thermostat Setpoint"
+	}
+
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'phraseSpoken' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'schedule' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+
+}
+
+// handle commands
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def setSchedule() {
+	log.debug "Executing 'setSchedule'"
+	// TODO: handle 'setSchedule' command
+}