MSA-1574: descricao

[CHF-441] Added Health Check Implementation for WeMo LED Bulb

devicetypes/smartthings/zigbee-dimmer.src/README.md

@@ -1,10 +1,11 @@
-# OSRAM Lightify LED On/Off/Dim
+# Zigbee Dimmer
 
 
 
 Works with: 
 
 * [OSRAM Lightify LED On/Off/Dim](https://shop.smartthings.com/#!/products/osram-led-smart-bulb-on-off-dim)
+* [WeMo LED Bulb](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)
 
 ## Table of contents
 
@@ -23,14 +24,16 @@ Works with:
 
 ## Device Health
 
-A Category C1 Zigbee dimmer with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+A Zigbee dimmer with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Enrolls with default periodic reporting until newer 5 min interval is confirmed
+It then enrolls the device with updated checkInterval i.e. 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
+* [OSRAM Lightify LED On/Off/Dim Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/207191763-OSRAM-LIGHTIFY-LED-Smart-Connected-Light-A19-On-Off-Dim)
+* [WeMo LED Bulb Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204259040-Belkin-WeMo-LED-Bulb-F7C033-)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/README.md

@@ -1,10 +1,11 @@
-# OSRAM Lightify Tunable 60 White
+# ZigBee White Color Temperature Bulb
 
 
 
 Works with: 
 
 * [OSRAM Lightify Tunable 60 White](http://www.osram.com/osram_com/tools-and-services/tools/lightify---smart-connected-light/lightify-for-home---what-is-light-to-you/lightify-products/lightify-classic-a60-tunable-white/index.jsp)
+* [OSRAM LIGHTIFY RT5/6 Tunable White](https://www.smartthings.com/works-with-smartthings/light-bulbs/osram-lightify-rt56-tunable-white)
 
 ## Table of contents
 
@@ -24,14 +25,16 @@ Works with:
 
 ## Device Health
 
-A Category C1 OSRAM Lightify Tunable 60 White with maxReportTime of 5 mins.
-Check-in interval is double the value of maxReportTime. 
+Zigbee Bulb with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime.
 This gives the device twice the amount of time to respond before it is marked as offline.
-Check-in interval = 12 mins
+Enrolls with default periodic reporting until newer 5 min interval is confirmed
+It then enrolls the device with updated checkInterval i.e. 12 mins
 
 ## Troubleshooting
 
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Other troubleshooting tips are listed as follows:
-* [Troubleshooting:](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
+* [OSRAM Lightify Tunable 60 White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/204576454-OSRAM-LIGHTIFY-Tunable-White-60-Bulb)
+* [OSRAM LIGHTIFY RT5/6 Tunable White Troubleshooting](https://support.smartthings.com/hc/en-us/articles/214191863-How-to-connect-OSRAM-LIGHTIFY-Bulbs)

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -33,7 +33,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -4,7 +4,8 @@
 
 Works with: 
 
-* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](http://www.leviton.com/OA_HTML/ProductDetail.jsp?partnumber=DZPD3-1LW)
+* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
+* [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
 
 ## Table of contents
 
@@ -24,7 +25,7 @@ Works with:
 
 ## Device Health
 
-A Category C5 Leviton Plug-in Lamp Dimmer Module (DZPA1-1LW) (Z-Wave) polled by the hub.
+Leviton Plug-in Lamp Dimmer Module (DZPA1-1LW) (Z-wave) and Leviton Universal Dimmer (DZMX1-LZ) (Z-Wave) are polled by the hub.
 As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
 Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
 Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
@@ -36,4 +37,5 @@ it is not polled for 5 minutes by the hub. This can delay up the process of bein
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -23,6 +23,7 @@ metadata {
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
+		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-switch-generic.src/README.md

@@ -4,8 +4,10 @@
 
 Works with: 
 
-* [Leviton Appliance Module (DZPA1-1LW)](https://support.smartthings.com/hc/en-us/articles/205881176-Leviton-Appliance-Module-DZPA1-1LW-)
-* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
+* [Leviton Appliance Module (DZPA1-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-appliance-module)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave)](https://www.smartthings.com/works-with-smartthings/outlets/ge-plug-in-outdoor-smart-switch)
+* [Leviton Outlet (DZR15-1LZ)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-outlet)
+* [Leviton Switch (DZS15-1LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-switch)
 
 ## Table of contents
 
@@ -23,7 +25,7 @@ Works with:
 
 ## Device Health
 
-A Category C5 Leviton Appliance Module (DZPA1-1LW) and GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) polled by the hub.
+Leviton Appliance Module (DZPA1-1LW), GE Plug-In Outdoor Smart Switch (GE 12720), Leviton Outlet (DZR15-1LZ) and Leviton Switch (DZS15-1LZ) (Z-Wave) are polled by the hub.
 As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
 Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
 Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
@@ -35,5 +37,7 @@ it is not polled for 5 minutes by the hub. This can delay up the process of bein
 If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205881176-Leviton-Appliance-Module-DZPA1-1LW-)
-* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
+* [Leviton Appliance Module (DZPA1-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [GE Plug-In Outdoor Smart Switch (GE 12720) (Z-Wave) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200903080-GE-Plug-In-Outdoor-Smart-Switch-GE-12720-Z-Wave-)
+* [Leviton Outlet (DZR15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Switch (DZS15-1LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -23,6 +23,8 @@ metadata {
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
+		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
+		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 	}
 
 	// simulator metadata

smartapps/namespace/name.src/name.groovy

@@ -0,0 +1,50 @@
+/**
+ *  name
+ *
+ *  Copyright 2016 João Borges
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "name",
+    namespace: "namespace",
+    author: "João Borges",
+    description: "description",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Title") {
+		// TODO: put inputs here
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -24,6 +24,12 @@
  *  switches             | switch            | on, off                     | on, off
  *  motionSensors        | motion            |                             | active, inactive
  *  contactSensors       | contact           |                             | open, closed
+ *  thermostat           | thermostat        | setHeatingSetpoint,         | temperature, heatingSetpoint
+ *                       |                   | setCoolingSetpoint(number)  | coolingSetpoint, thermostatSetpoint
+ *                       |                   | off, heat, emergencyHeat    | thermostatMode — ["emergency heat", "auto", "cool", "off", "heat"]
+ *                       |                   | cool, setThermostatMode     | thermostatFanMode — ["auto", "on", "circulate"]
+ *                       |                   | fanOn, fanAuto, fanCirculate| thermostatOperatingState — ["cooling", "heating", "pending heat",
+ *                       |                   | setThermostatFanMode, auto  | "fan only", "vent economizer", "pending cool", "idle"]
  *  presenceSensors      | presence          |                             | present, 'not present'
  *  temperatureSensors   | temperature       |                             | <numeric, F or C according to unit>
  *  accelerationSensors  | acceleration      |                             | active, inactive
@@ -58,6 +64,7 @@ preferences(oauthPage: "deviceAuthorization") {
 			input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
 			input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 			input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors?", multiple: true, required: false
+      input "thermostats", "capability.thermostat", title: "Which Thermostats?", multiple: true, required: false
 			input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors?", multiple: true, required: false
 			input "temperatureSensors", "capability.temperatureMeasurement", title: "Which Temperature Sensors?", multiple: true, required: false
 			input "accelerationSensors", "capability.accelerationSensor", title: "Which Vibration Sensors?", multiple: true, required: false
@@ -936,7 +943,7 @@ def deleteHarmony() {
 }
 
 private getAllDevices() {
-	([] + switches + motionSensors + contactSensors + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
+	([] + switches + motionSensors + contactSensors + thermostats + presenceSensors + temperatureSensors + accelerationSensors + waterSensors + lightSensors + humiditySensors + alarms + locks)?.findAll()?.unique { it.id }
 }
 
 private deviceItem(device) {