MSA-1599: Following the Benson steps for using iris smart plug

Rolling down staging hotfix to master

devicetypes/blebson/iris-smart-plug.src/iris-smart-plug.groovy

@@ -0,0 +1,241 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
+ *
+ *	Author: SmartThings
+ *	Date: 2015-08-23
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Iris Smart Plug", namespace: "blebson", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Energy Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"     
+		attribute "timerStart", "number"
+
+		attribute "energyDisplay", "string"
+		attribute "elapsedTimeDisplay", "string"
+
+		command "resetEnergyUsage"
+
+		fingerprint profileId: "0104", inClusters: "0000 0003 0004 0005 0006 0B04 0B05 FC03", outClusters: "0019", manufacturer: "CentraLite",  model: "3210-L", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+        
+        section("Reporting Intervals") {
+        	input "intervalMin", "number", title: "Minimum interval between reports [s]", defaultValue: 5, range: "1..600"
+        	input "intervalMax", "number", title: "Maximum interval between reports [s]", defaultValue: 600, range: "1..600"
+        }
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+        
+		valueTile("energyDisplay", "device.energyDisplay", width: 5, height: 1, decoration: "flat") {
+			state "default", label:'Energy used: ${currentValue}', unit: "kWh"
+        	}
+        	
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        
+		standardTile("resetUsage", "command.resetEnergyUsage", decoration: "flat", width: 1, height: 1){
+			state "default", action: "resetEnergyUsage", label:'Reset kWh', icon:"st.Health & Wellness.health7"
+		}        
+        
+		valueTile("elapsedTimeDisplay", "device.elapsedTimeDisplay", decoration: "flat", width: 5, height: 1){
+			state "default", label: 'Time: ${currentValue}', unit: "h"
+		}      
+
+		standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"configure", icon:"st.secondary.configure"
+		}
+
+		main "switch"
+		details(["switch","energyDisplay","resetUsage","power","elapsedTimeDisplay","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+	if (state.timerStart == null)
+	{
+		state.timerStart = Calendar.getInstance().getTimeInMillis()
+		state.energy = 0.0
+	}
+
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10           
+			sendEvent(name: "power", value: powerValue, isStateChange: true, displayed: false) // note: stateChange = true added so the energy calculation can work properly
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/           
+			calculateAndShowEnergy()
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
+	}
+}
+
+def calculateAndShowEnergy()
+{
+    def recentEvents = device.statesSince("power", new Date()-1, [max: 2]).collect {[value: it.value as float, date: it.date]}        	
+    def deltaT = (recentEvents[0].date.getTime() - recentEvents[1].date.getTime()) // time since last "power" event in milliseconds
+    deltaT = deltaT / 3600000 // convert to hours
+    
+    def energyValue = device.currentValue("energy") 
+    if(energyValue != null) {
+    	energyValue += (recentEvents[1].value * deltaT) / 1000 // energy used since last "power" event in kWh 
+    }
+    
+    sendEvent(name: "energy", value: energyValue, displayed: false)
+    sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",energyValue), displayed: false)
+
+    def currentTime = Calendar.getInstance().getTimeInMillis()   
+    def timeDifference = ((long)currentTime - state.timerStart)/1000; // in seconds
+    int h = (int) (timeDifference / (3600));
+    int m = (int) ((timeDifference - (h * 3600)) / 60);
+    int s = (int) (timeDifference - (h * 3600) - m * 60);
+    int d = (int) h >= 24 ? h / 24 : 0
+    h = d > 0 ? h % 24 : h
+
+    sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", d, h, m, s), displayed: false)
+}
+
+def off() {
+	zigbee.off()
+}
+
+def on() {
+	zigbee.on()
+}
+
+def resetEnergyUsage() {
+	sendEvent(name: "energy", value: 0.0, displayed: false)
+	state.timerStart = Calendar.getInstance().getTimeInMillis()
+	sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",0.0), displayed: false)
+	sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", 0, 0, 0, 0), displayed: false)
+}
+
+def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
+	return zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+}
+
+def configure() {
+	log.debug "Configuring..."
+	return zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+def updated() {
+	response(configure())
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 ${intervalMin ?: 5} ${intervalMax ?: 600} {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -120,6 +120,15 @@ def configure() {
 	return cmd
 }
 
+
+def installed() {
+	initialize()
+}
+
 def updated() {
+	initialize()
+}
+
+def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -109,6 +109,15 @@ def configure() {
 	return cmds
 }
 
+
+def installed() {
+	initialize()
+}
+
 def updated() {
+	initialize()
+}
+
+def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Polling"
+        capability "Health Check"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,7 +236,33 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    onAction("refresh")
+    // Notify health check about this device with timeout interval 12 minutes
+    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
+    startPoll()
+}
+
+/**
+ * Called by health check if no events been generated in the last 12 minutes
+ * If device doesn't respond it will be marked offline (not available)
+ */
+def ping() {
+    TRACE("ping")
+    boseSendGetNowPlaying()
+}
+
+/**
+ * Schedule a 2 minute poll of the device to refresh the
+ * tiles so the user gets the correct information.
+ */
+def startPoll() {
+    TRACE("startPoll")
+    unschedule()
+    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
+    def sec = Math.round(Math.floor(Math.random() * 60))
+    //def cron = "$sec 0/5 * * * ?" // every 5 min
+    def cron = "$sec 0/2 * * * ?" // every 2 min
+    log.debug "schedule('$cron', boseSendGetNowPlaying)"
+    schedule(cron, boseSendGetNowPlaying)
 }
 
 /**
@@ -316,14 +342,6 @@ def onAction(String user, data=null) {
     return actions
 }
 
-/**
- * Called every so often (every 5 minutes actually) to refresh the
- * tiles so the user gets the correct information.
- */
-def poll() {
-    return boseRefreshNowPlaying()
-}
-
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -837,6 +855,10 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
+def boseSendGetNowPlaying() {
+    sendHubCommand(boseGET("/now_playing"))
+}
+
 /**
  * Requests the list of presets
  *
@@ -1014,4 +1036,8 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
+}
+
+def TRACE(text) {
+    log.trace "${text}"
 }

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -183,6 +183,15 @@ def updateState(String name, String value) {
 	device.updateDataValue(name, value)
 }
 
+
+def installed() {
+	initialize()
+}
+
 def updated() {
+	initialize()
+}
+
+def initialize() {
 	sendEvent(name: "numberOfButtons", value: 3)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -125,7 +125,7 @@ metadata {
 void installed() {
     // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
     // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud", hubHardwareId: device.hub.hardwareID], displayed: false)
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
 }
 
 // Device Watch will ping the device to proactively determine if the device has gone offline

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -71,7 +71,7 @@ def parse(String description) {
 
 	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult != "false") {
+	if (finalResult) {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
@@ -212,13 +212,16 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
+		else {
+			return [:]
+		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
@@ -252,7 +255,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 
 }
@@ -279,10 +282,9 @@ def isDescriptionLevel(descMap) {
 
 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
-
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 
@@ -304,7 +306,7 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return "false"
+		return [:]
 	}
 }
 

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -57,6 +57,7 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
+	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -64,7 +65,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)
 
-		def results = [
+		results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -73,8 +74,6 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
-	} else {
-		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -126,6 +126,15 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
+
+def installed() {
+	initialize()
+}
+
 def updated() {
+	initialize()
+}
+
+def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -23,9 +23,11 @@ metadata {
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -32,11 +32,12 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
     }
 
     // UI tile definitions

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -32,11 +32,12 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -83,105 +84,24 @@ def parse(String description) {
         }
     }
     else {
-        Map bindingTable = parseBindingTableResponse(description)
-        if (bindingTable) {
-            List<String> cmds = []
-            bindingTable.table_entries.inject(cmds) { acc, entry ->
-                // The binding entry is not for our hub and should be deleted
-                if (entry["dstAddr"] != zigbeeEui) {
-                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
-                }
-                acc
-            }
-            // There are more entries that we haven't examined yet
-            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
-                def startPos
-                if (cmds) {
-                    log.warn "Removing binding entries for other devices: $cmds"
-                    // Since we are removing some entries, we should start in the same spot as we just read since values
-                    // will fill in the newly vacated spots
-                    startPos = bindingTable.startIndex
-                } else {
-                    // Since we aren't removing anything we move forward to the next set of table entries
-                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
-                }
-                cmds.addAll(requestBindingTable(startPos))
-            }
-            sendHubCommand(cmds.collect { it ->
-                new physicalgraph.device.HubAction(it)
-            }, 2000)
-        } else {
-            def cluster = zigbee.parse(description)
+        def cluster = zigbee.parse(description)
 
-            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-                if (cluster.data[0] == 0x00) {
-                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-                }
-                else {
-                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
-                }
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
+                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
             }
             else {
-                log.warn "DID NOT PARSE MESSAGE for description : $description"
-                log.debug "${cluster}"
+                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
         }
+        else {
+            log.warn "DID NOT PARSE MESSAGE for description : $description"
+            log.debug "${cluster}"
+        }
     }
 }
 
-def parseBindingTableResponse(description) {
-    Map descMap = zigbee.parseDescriptionAsMap(description)
-    if (descMap["clusterInt"] == 0x8033) {
-        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
-        def field_values = [:]
-        def data = descMap["data"]
-        header_field_lengths.each { k, v ->
-            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
-            data = data.drop(v);
-        }
-
-        List<Map> table = []
-        if (field_values.numEntriesReturned) {
-            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
-            for (def i : 0..(field_values.numEntriesReturned - 1)) {
-                def entryMap = [:]
-                table_entry_lengths.each { k, v ->
-                    def val = data.take(v).reverse().join("")
-                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
-                    data = data.drop(v)
-                }
-
-                switch (entryMap.dstAddrMode) {
-                    case 0x01:
-                        entryMap["dstAddr"] = data.take(2).reverse().join("")
-                        data = data.drop(2)
-                        break
-                    case 0x03:
-                        entryMap["dstAddr"] = data.take(8).reverse().join("")
-                        data = data.drop(8)
-                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
-                        data = data.drop(1)
-                        break
-                }
-                table << entryMap
-            }
-        }
-        field_values["table_entries"] = table
-        return field_values
-    }
-    return [:]
-}
-
-def requestBindingTable(startPos=0) {
-    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
-}
-
-def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
-    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
-}
-
-
 def off() {
     zigbee.off()
 }
@@ -211,7 +131,8 @@ def configure() {
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-    refresh() + requestBindingTable(0) + ["delay 2000"]
+    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
+    refresh()
 }
 
 def setColorTemperature(value) {

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -27,6 +27,10 @@ metadata {
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "PAR 16 50 RGBW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY RGBW PAR 16 50"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenpole RGBW-Lightify", deviceJoinName: "OSRAM LIGHTIFY Gardenpole RGBW"
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Outdoor Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Outdoor Flex RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -32,6 +32,7 @@ metadata {
 
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
         fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
     }
 
     // UI tile definitions

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
+    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
+    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
             }
         }
     }
@@ -196,6 +196,8 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
+            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
+            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }