MSA-1588: my home monitoring

devicetypes/keybounce/lannouncer-alerter.src/lannouncer-alerter.groovy

@@ -0,0 +1,360 @@
+/**
+ *  LANnouncer Alerter (Formerly LANdroid - but Google didn't like that much.)
+ *
+ *  Requires the LANnouncer android app; https://play.google.com/store/apps/details?id=com.keybounce.lannouncer
+ *  See http://www.keybounce.com/LANdroidHowTo/LANdroid.html for full downloads and instructions.
+ *  SmartThings thread: https://community.smartthings.com/t/android-as-a-speech-alarm-device-released/30282/12
+ *  
+ * Note: Only Siren and Strobe from the U.I. or Alarm capabilities default to continuous.
+ *
+ *  Version 1.25 22 July 2016
+ * 
+ *
+ *  Copyright 2015-2016 Tony McNamara
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ * To Do: Add string return to Image Capture attribute
+ *
+ */
+
+metadata {
+    definition (name: "LANnouncer Alerter", namespace: "KeyBounce", author: "Tony McNamara") {
+        capability "Alarm"
+        capability "Speech Synthesis"
+        capability "Notification"
+        capability "Tone"
+        capability "Image Capture"
+        attribute  "LANdroidSMS","string"
+        /* Per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html#actuator-and-sensor */
+        capability "Sensor"
+        capability "Actuator"
+
+        // Custom Commands
+        /** Retrieve image, formatted for SmartThings, from camera by name. */
+        command "chime"
+        command "doorbell"
+        command "ipCamSequence", ["number"]
+        command "retrieveAndWait", ["string"]
+        command "retrieveFirstAndWait"
+        command "retrieveSecondAndWait"
+    }
+    preferences {
+        input("DeviceLocalLan", "string", title:"Android IP Address", description:"Please enter your tablet's I.P. address", defaultValue:"" , required: false, displayDuringSetup: true)
+        input("DevicePort", "string", title:"Android Port", description:"Port the Android device listens on", defaultValue:"1035", required: false, displayDuringSetup: true)
+        input("ReplyOnEmpty", "bool", title:"Say Nothing", description:"When no speech is found, announce LANdroid?  (Needed for the speech and notify tiles to work)", defaultValue: true, displayDuringSetup: true)
+        input("AlarmContinuous", "bool", title:"Continuous Alarm (vs 10 sec.)", description: "When on, the alarm will sound until Stop is issued.", defaultValue: false, displayDuringSetup: true)
+    }
+
+    simulator {
+        // reply messages
+        ["strobe","siren","both","off"].each 
+            {
+                reply "$it": "alarm:$it"
+            }
+    }
+
+    tiles {
+        standardTile("alarm", "device.alarm", width: 2, height: 2) {
+            state "off", label:'off', action:'alarm.both', icon:"st.alarm.alarm.alarm", backgroundColor:"#ffffff"
+            state "strobe", label:'strobe!', action:'alarm.off', icon:"st.Lighting.light11", backgroundColor:"#e86d13"
+            state "siren", label:'siren!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+            state "both", label:'alarm!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+        }
+        standardTile("strobe", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"alarm.strobe", icon:"st.secondary.strobe"
+        }
+        
+        standardTile("siren", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'', action:"alarm.siren", icon:"st.secondary.siren"
+        }
+        standardTile("off", "device.alarm", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Off', action:"alarm.off", icon:"st.quirky.spotter.quirky-spotter-sound-off"
+        }       
+        
+        /* Apparently can't show image attributes on tiles. */
+        standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false) 
+        {
+            state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+            state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
+            state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
+        }
+
+        
+        standardTile("speak", "device.speech", inactiveLabel: false, decoration: "flat") 
+        {
+            state "default", label:'Speak', action:"Speech Synthesis.speak", icon:"st.Electronics.electronics13"
+        }
+        standardTile("toast", "device.notification", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Notify', action:"notification.deviceNotification", icon:"st.Kids.kids1"
+        }
+        standardTile("beep", "device.tone", inactiveLabel: false, decoration: "flat") {
+            state "default", label:'Tone', action:"tone.beep", icon:"st.Entertainment.entertainment2"
+        }
+        carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
+
+        main (["alarm", "take"]);
+        details(["alarm","strobe","siren","off","speak", "take","toast","beep", "cameraDetails"]);
+    }
+}
+
+/** Generally matches TTSServer/app/build.gradle */
+String getVersion() {return "24 built July 2016";}
+
+
+/** Alarm Capability, Off.
+ *  Turns off both the strobe and the alarm.
+ *  Necessary when in continuous mode. 
+ */
+def off() {
+    log.debug "Executing 'off'"
+    sendEvent(name:"alarm", value:"off")
+    def command="&ALARM=STOP&FLASH=STOP&"+getDoneString();
+    return sendCommands(command)
+}
+
+/** Alarm Capability: Strobe
+ *  Flashes the camera light, if any.
+ */
+def strobe() {
+    log.debug "Executing 'strobe'"
+    // For illustration, switch to siren and sendEvent after.
+    def command= (AlarmContinuous?"&FLASH=CONTINUOUS&":"&FLASH=STROBE&")+getDoneString();
+    // def command=(AlarmContinuous?"&ALARM=SIREN:CONTINUOUS&":"&ALARM=SIREN&")+getDoneString();
+    def hubAction = sendCommands(command)
+    sendEvent(name:"alarm", value:"strobe")
+    return hubAction;
+}
+
+/** Alarm Capability: Siren 
+ *  Sounds the siren, either continuous or for a brief period, depending on setting.
+ *  If continuous, Stop should be called later.
+ */
+def siren() {
+    log.debug "Executing 'siren'"
+    sendEvent(name:"alarm", value:"siren")
+    def command=(AlarmContinuous?"&ALARM=SIREN:CONTINUOUS&":"&ALARM=SIREN&")+getDoneString();
+    return sendCommands(command);
+}
+
+/** Tone Capability: Beep
+ *  Sounds a short beep
+ */
+def beep() {
+    log.debug "Executing 'beep'"
+    def command="&ALARM=CHIME&"+getDoneString()
+    return sendCommands(command);
+}
+
+def both() {
+    log.debug "Executing 'both'"
+    sendEvent(name:"alarm", value:"both")
+    def command="&ALARM=ON&FLASH=ON&"+getDoneString()
+    if (AlarmContinuous)
+    {
+        command="&ALARM=SIREN:CONTINUOUS&FLASH=CONTINUOUS&"+getDoneString()
+    }
+    return sendCommands(command);
+}
+
+/** speechSynthesis Capability: Speak
+ */
+def speak(toSay) {
+    log.debug "Executing 'speak'"
+    if (!toSay?.trim()) {
+        if (ReplyOnEmpty) {
+            toSay = "LANnouncer Version ${version}"
+        }
+    }
+
+    if (toSay?.trim()) {
+        def command="&SPEAK="+toSay+"&"+getDoneString()
+        return sendCommands(command)
+    }
+}
+
+/** Notification capability: deviceNotification
+ */
+def deviceNotification(toToast) {
+    log.debug "Executing notification with "+toToast
+    if (!toToast?.trim()) {
+        if (ReplyOnEmpty) {
+            toToast = "LANnouncer Version ${version}";
+        }
+    }
+    if (toToast?.trim()) {
+        def command="&TOAST="+toToast+"&"+getDoneString()
+        return sendCommands(command)
+    }
+}    
+
+def chime() {
+    log.debug "Executing 'chime'"
+    // TODO: handle 'siren' command
+    def command="&ALARM=CHIME&"+getDoneString()
+    return sendCommands(command)
+}
+
+def doorbell() {
+    log.debug "Executing 'doorbell'"
+    // TODO: handle 'siren' command
+    def command="&ALARM=DOORBELL&"+getDoneString()
+    return sendCommands(command)
+}
+
+def ipCamSequence(cameraNumber) {
+    def camera = (cameraNumber==1?"FIRST":"SECOND");
+    def command="&RETRIEVESEQ="+cameraNumber+"&"+getDoneString()
+    return sendIPCommand(command, true)
+}
+
+
+def retrieveFirstAndWait() {
+    retrieveAndWait("FIRST");
+}
+def retrieveSecondAndWait() {
+    retrieveAndWait("SECOND");
+}
+def retrieveAndWait(cameraName) {
+    log.info("Requesting image from camera ${cameraName}");
+    def command="&RETRIEVE="+cameraName+"&STSHRINK=TRUE&"+getDoneString()
+    return sendIPCommand(command, true)
+}
+
+
+def take() {
+    // This won't result in received file. Can't handle large or binaries in hub.
+    log.debug "Executing 'take'"
+    def command="&PHOTO=BACK&STSHRINK=TRUE&"+getDoneString()
+    return sendIPCommand(command, true)
+}
+
+/** Send to IP and to SMS as appropriate 
+ *  The caller MUST return the value, which is the hubAction.
+ *  As of version 1.25, does not "send" the command so much as 
+ *  request that the calling service send it.
+ */
+private sendCommands(command) {
+    log.info "Command request: "+command
+    sendSMSCommand(command)
+    return sendIPCommand(command)
+}
+
+/** Prepares the hubAction to be executed.
+ *  Pre-V25, this was executed in-line.  
+ *  Now it is returned, not executed, and must be returned up the calling chain.
+ */
+private sendIPCommand(commandString, sendToS3 = false) {
+    log.info "Sending command "+ commandString+" to "+DeviceLocalLan+":"+DevicePort
+    if (DeviceLocalLan?.trim()) {
+        def hosthex = convertIPtoHex(DeviceLocalLan)
+        def porthex = convertPortToHex(DevicePort)
+        device.deviceNetworkId = "$hosthex:$porthex"
+
+        def headers = [:] 
+        headers.put("HOST", "$DeviceLocalLan:$DevicePort")
+
+        def method = "GET"
+
+        def hubAction = new physicalgraph.device.HubAction(
+            method: method,
+            path: "/"+commandString,
+            headers: headers
+            );
+        if (sendToS3 == true)
+        {
+            hubAction.options = [outputMsgToS3:true];
+        }
+        log.debug hubAction
+        return hubAction;
+    }
+}
+
+private sendSMSCommand(commandString) {
+    def preface = "+@TTSSMS@+"
+    def smsValue = preface+"&"+commandString
+    state.lastsmscommand = smsValue
+    sendEvent(name: "LANdroidSMS", value: smsValue, isStateChange: true)
+    /*
+    if (SMSPhone?.trim()) {
+        sendSmsMessage(SMSPhone, preface+"&"+commandString)
+    }
+    */
+}
+
+private String getDoneString() {
+    return "@DONE@"
+}
+
+def parse(String description) {
+    log.debug "Parsing '${description}'"
+    def map = parseLanMessage(description);
+    log.debug "As LAN: " + map;
+    if ((map.headers) && (map.headers.'Content-Type' != null) && (map.headers.'Content-Type'.contains("image/jpeg")) )
+    {   //  Store the file
+      if(map.body) 
+      {
+            storeImage(getPictureName(), map.body);
+      }
+    }
+/* 'index:0F, mac:0073E023A13A, ip:C0A80114, port:040B, requestId:f9036fb2-9637-40b8-b2c5-71ba5a09fd3e, bucket:smartthings-device-conn-temp, key:fc8e3dfd-5035-40a2-8adc-a312926f9034' */
+
+    else if (map.bucket && map.key)
+    { //    S3 pointer; retrieve image from it to store.
+        try {
+            def s3ObjectContent; // Needed for scope of try-catch
+            def imageBytes = getS3Object(map.bucket, map.key + ".jpg")
+
+            if(imageBytes)
+            {
+                log.info ("Got image bytes; saving them.")
+                s3ObjectContent = imageBytes.getObjectContent()
+                def bytes = new ByteArrayInputStream(s3ObjectContent.bytes)
+                storeImage(getPictureName(), bytes)
+            }
+        }
+        catch(Exception e) 
+        {
+            log.error e
+        }
+        finally {
+            //explicitly close the stream
+            if (s3ObjectContent) { s3ObjectContent.close() }
+        }        
+    }
+}
+
+
+// Image Capture handling
+/* Note that images are stored in https://graph.api.smartthings.com/api/s3/smartthings-smartsense-camera/[IMAGE-ID4], 
+ * where [IMAGE-ID] is listed in the IDE under My Devices > [Camera] > Current States: Image. That page is updated as pictures are taken.
+ */
+
+
+private getPictureName() {
+    def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
+    log.debug pictureUuid
+    def picName = device.deviceNetworkId.replaceAll(':', '') + "_$pictureUuid" + ".jpg"
+    return picName
+}
+
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02X', it.toInteger() ) }.join()
+    log.debug "IP address entered is $ipAddress and the converted hex code is $hex"
+    return hex
+
+}
+
+private String convertPortToHex(port) {
+    String hexport = port.toString().format( '%04X', port.toInteger() )
+    log.debug hexport
+    return hexport
+}

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -120,15 +120,6 @@ def configure() {
 	return cmd
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -109,15 +109,6 @@ def configure() {
 	return cmds
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -27,7 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Health Check"
+        capability "Polling"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -236,33 +236,7 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
+    onAction("refresh")
 }
 
 /**
@@ -342,6 +316,14 @@ def onAction(String user, data=null) {
     return actions
 }
 
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -855,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
  * Requests the list of presets
  *
@@ -1036,8 +1014,4 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -183,15 +183,6 @@ def updateState(String name, String value) {
 	device.updateDataValue(name, value)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 3)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -125,7 +125,7 @@ metadata {
 void installed() {
     // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
     // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
+    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // Device Watch will ping the device to proactively determine if the device has gone offline

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -71,7 +71,7 @@ def parse(String description) {
 
 	def event = [:]
 	def finalResult = isKnownDescription(description)
-	if (finalResult) {
+	if (finalResult != "false") {
 		log.info finalResult
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
@@ -212,16 +212,13 @@ def isKnownDescription(description) {
 		else if (descMap.cluster == "0B04" || descMap.clusterId == "0B04"){
 			isDescriptionPower(descMap)
 		}
-		else {
-			return [:]
-		}
 	}
 	else if(description?.startsWith("on/off:")) {
 		def switchValue = description?.endsWith("1") ? "on" : "off"
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
@@ -255,7 +252,7 @@ def isDescriptionOnOff(descMap) {
 		return	[type: "switch", value : switchValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 
 }
@@ -282,9 +279,10 @@ def isDescriptionLevel(descMap) {
 
 	if (dimmerValue != -1){
 		return	[type: "level", value : dimmerValue]
+
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 
@@ -306,7 +304,7 @@ def isDescriptionPower(descMap) {
 		return	[type: "power", value : powerValue]
 	}
 	else {
-		return [:]
+		return "false"
 	}
 }
 

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -57,7 +57,6 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -65,7 +64,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)
 
-		results = [
+		def results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -74,6 +73,8 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
+	} else {
+		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -126,15 +126,6 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -23,11 +23,9 @@ metadata {
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -32,12 +32,11 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -32,12 +32,11 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY RT5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }
 
     // UI tile definitions
@@ -84,24 +83,105 @@ def parse(String description) {
         }
     }
     else {
-        def cluster = zigbee.parse(description)
+        Map bindingTable = parseBindingTableResponse(description)
+        if (bindingTable) {
+            List<String> cmds = []
+            bindingTable.table_entries.inject(cmds) { acc, entry ->
+                // The binding entry is not for our hub and should be deleted
+                if (entry["dstAddr"] != zigbeeEui) {
+                    acc.addAll(removeBinding(entry.clusterId, entry.srcAddr, entry.srcEndpoint, entry.dstAddr, entry.dstEndpoint))
+                }
+                acc
+            }
+            // There are more entries that we haven't examined yet
+            if (bindingTable.numTableEntries > bindingTable.startIndex + bindingTable.numEntriesReturned) {
+                def startPos
+                if (cmds) {
+                    log.warn "Removing binding entries for other devices: $cmds"
+                    // Since we are removing some entries, we should start in the same spot as we just read since values
+                    // will fill in the newly vacated spots
+                    startPos = bindingTable.startIndex
+                } else {
+                    // Since we aren't removing anything we move forward to the next set of table entries
+                    startPos = bindingTable.startIndex + bindingTable.numEntriesReturned
+                }
+                cmds.addAll(requestBindingTable(startPos))
+            }
+            sendHubCommand(cmds.collect { it ->
+                new physicalgraph.device.HubAction(it)
+            }, 2000)
+        } else {
+            def cluster = zigbee.parse(description)
 
-        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
-            if (cluster.data[0] == 0x00) {
-                log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
-                sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+            if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+                if (cluster.data[0] == 0x00) {
+                    log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
+                    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+                }
+                else {
+                    log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                }
             }
             else {
-                log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
+                log.warn "DID NOT PARSE MESSAGE for description : $description"
+                log.debug "${cluster}"
             }
         }
-        else {
-            log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${cluster}"
-        }
     }
 }
 
+def parseBindingTableResponse(description) {
+    Map descMap = zigbee.parseDescriptionAsMap(description)
+    if (descMap["clusterInt"] == 0x8033) {
+        def header_field_lengths = ["transactionSeqNo": 1, "status": 1, "numTableEntries": 1, "startIndex": 1, "numEntriesReturned": 1]
+        def field_values = [:]
+        def data = descMap["data"]
+        header_field_lengths.each { k, v ->
+            field_values[k] = Integer.parseInt(data.take(v).join(""), 16);
+            data = data.drop(v);
+        }
+
+        List<Map> table = []
+        if (field_values.numEntriesReturned) {
+            def table_entry_lengths = ["srcAddr": 8, "srcEndpoint": 1, "clusterId": 2, "dstAddrMode": 1]
+            for (def i : 0..(field_values.numEntriesReturned - 1)) {
+                def entryMap = [:]
+                table_entry_lengths.each { k, v ->
+                    def val = data.take(v).reverse().join("")
+                    entryMap[k] = val.length() < 8 ? Integer.parseInt(val, 16) : val
+                    data = data.drop(v)
+                }
+
+                switch (entryMap.dstAddrMode) {
+                    case 0x01:
+                        entryMap["dstAddr"] = data.take(2).reverse().join("")
+                        data = data.drop(2)
+                        break
+                    case 0x03:
+                        entryMap["dstAddr"] = data.take(8).reverse().join("")
+                        data = data.drop(8)
+                        entryMap["dstEndpoint"] = Integer.parseInt(data.take(1).join(""), 16)
+                        data = data.drop(1)
+                        break
+                }
+                table << entryMap
+            }
+        }
+        field_values["table_entries"] = table
+        return field_values
+    }
+    return [:]
+}
+
+def requestBindingTable(startPos=0) {
+    return ["zdo mgmt-bind 0x${zigbee.deviceNetworkId} $startPos"]
+}
+
+def removeBinding(cluster, srcAddr, srcEndpoint, destAddr, destEndpoint) {
+    return ["zdo unbind unicast 0x${zigbee.deviceNetworkId} {${srcAddr}} $srcEndpoint $cluster {${destAddr}} $destEndpoint"]
+}
+
+
 def off() {
     zigbee.off()
 }
@@ -131,8 +211,7 @@ def configure() {
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
-    // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-    refresh()
+    refresh() + requestBindingTable(0) + ["delay 2000"]
 }
 
 def setColorTemperature(value) {

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -19,9 +19,9 @@
     author: "SmartThings",
     description: "Control your Bose SoundTouch speakers",
     category: "SmartThings Labs",
-    iconUrl: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon.png",
-    iconX2Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x.png",
-    iconX3Url: "https://d3azp77rte0gip.cloudfront.net/smartapps/fcf1d93a-ba0b-4324-b96f-e5b5487dfaf5/images/BoseST_icon@2x-1.png",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
     singleInstance: true
 )
 
@@ -104,7 +104,7 @@ def deviceDiscovery()
 
         return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"", refreshInterval:refreshInterval, install:true, uninstall: true) {
             section("Please wait while we discover your ${getDeviceName()}. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices, submitOnChange: true
+                input "selecteddevice", "enum", required:false, title:"Select ${getDeviceName()} (${numFound} found)", multiple:true, options:devices
             }
         }
     }
@@ -196,8 +196,6 @@ def addDevice(){
             d = addChildDevice(getNameSpace(), getDeviceName(), dni, newDevice?.value.hub, [label:"${deviceName}"])
             d.boseSetDeviceID(newDevice.value.deviceID)
             log.trace "Created ${d.displayName} with id $dni"
-            // sync DTH with device, done here as it currently don't work from the DTH's installed() method
-            d.refresh()
         } else {
             log.trace "${d.displayName} with id $dni already exists"
         }

smartapps/thehomeremote-homeremote/home-remote.src/home-remote.groovy

@@ -1,800 +0,0 @@
-/**
- *  Home Remote
- *
- *  Copyright 2015 The Home Remote
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Home Remote",
-    namespace: "thehomeremote.homeremote",
-    author: "The Home Remote",
-    description: "Web service that enables communication between the Home Remote app and a SmartThings hub.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: [displayName: "The Home Remote", displayLink: "http://thehomeremote.com/"])
-
-
-preferences {
-    section() {
-	input "accelerationSensors", "capability.accelerationSensor",title: "Acceleration Sensors", multiple: true, required: false
-	input "alarms", "capability.alarm",title: "Alarms", multiple: true, required: false
-	input "batteries", "capability.battery",title: "Batteries", multiple: true, required: false
-	input "beacons", "capability.beacon",title: "Beacons", multiple: true, required: false
-	input "buttonGroup", "capability.button",title: "Buttons", multiple: true, required: false
-	input "carbonMonoxideDetectors", "capability.carbonMonoxideDetector",title: "CO Detectors", multiple: true, required: false
-	input "colorControls", "capability.colorControl",title: "Color Lights", multiple: true, required: false
-	input "contactSensors", "capability.contactSensor",title: "Contact Sensors", multiple: true, required: false
-	input "doorControls", "capability.doorControl",title: "Door Controllers", multiple: true, required: false
-	input "energyMeters", "capability.energyMeter",title: "Energy Meters", multiple: true, required: false
-	input "illuminanceMeasurements", "capability.illuminanceMeasurement",title: "Illuminance Sensors", multiple: true, required: false
-	input "imageCaptures", "capability.imageCapture",title: "Cameras", multiple: true, required: false
-	input "locks", "capability.lock",title: "Locks", multiple: true, required: false
-	input "mediaControllers", "capability.mediaController",title: "Media Controllers", multiple: true, required: false
-	input "momentaries", "capability.momentary",title: "Momentary Buttons", multiple: true, required: false
-	input "motionSensors", "capability.motionSensor",title: "Motion Sensors", multiple: true, required: false
-	input "musicPlayers", "capability.musicPlayer",title: "Music Players", multiple: true, required: false
-	input "powerMeters", "capability.powerMeter",title: "Power Meters", multiple: true, required: false
-	input "presenceSensors", "capability.presenceSensor",title: "Presence Sensors", multiple: true, required: false
-	input "relativeHumidityMeasurements", "capability.relativeHumidityMeasurement",title: "Humidity Sensors", multiple: true, required: false
-	input "relaySwitches", "capability.relaySwitch",title: "Relays", multiple: true, required: false
-	input "signalStrengths", "capability.signalStrength",title: "Signal Strengths", multiple: true, required: false
-	input "sleepSensors", "capability.sleepSensor",title: "Sleep Sensors", multiple: true, required: false
-	input "smokeDetectors", "capability.smokeDetector",title: "Smoke Detectors", multiple: true, required: false
-	input "speechSyntheses", "capability.speechSynthesis",title: "Speech Syntheses", multiple: true, required: false
-	input "stepSensors", "capability.stepSensor",title: "Step Sensors", multiple: true, required: false
-	input "switches", "capability.switch",title: "Switches", multiple: true, required: false
-	input "switchLevels", "capability.switchLevel",title: "Dimmers", multiple: true, required: false
-	input "temperatureMeasurements", "capability.temperatureMeasurement",title: "Temperature Sensors", multiple: true, required: false
-	input "thermostats", "capability.thermostat",title: "Thermostats", multiple: true, required: false
-	input "threeAxes", "capability.threeAxis",title: "Three axis Sensors", multiple: true, required: false
-	input "tones", "capability.tone",title: "Tones", multiple: true, required: false
-	input "touchSensors", "capability.touchSensor",title: "Touch Sensors", multiple: true, required: false
-	input "valves", "capability.valve",title: "Valves", multiple: true, required: false
-	input "waterSensors", "capability.waterSensor",title: "Water Sensors", multiple: true, required: false
-    }
-}
-
-mappings {
-  path("/GetCurrentValues") {
-    action: [
-      GET: "getCurrentValues"
-    ]
-  }
-  path("/GetCurrentValuesWithDisplayName") {
-    action: [
-      GET: "getCurrentValuesWithDisplayName"
-    ]
-  }
-  path("/GetRoutines") {
-    action: [
-      GET: "getRoutines"
-    ]
-  }
-  path("/ExecuteCommand") {
-    action: [
-      PUT: "executeCommand"
-    ]
-  }
-  path("/ExecuteRoutine") {
-    action: [
-      PUT: "executeRoutine"
-    ]
-  }
-}
-
-def getCurrentValues() {
-    def resp = []    
-        
- 	accelerationSensors.each {
-      resp << [id: it.id, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
-    }
-
-	alarms.each {
-      resp << [id: it.id, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
-    }
-
-	batteries.each {
-      resp << [id: it.id, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
-    }
-
-	beacons.each {
-      resp << [id: it.id, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	buttonGroup.each {
-      resp << [id: it.id, capability: "Button", attribute: "button", value: it.currentValue("button")]
-    }
-
-	carbonMonoxideDetectors.each {
-      resp << [id: it.id, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
-    }
-
-	contactSensors.each {
-      resp << [id: it.id, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	doorControls.each {
-      resp << [id: it.id, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
-    }
-
-	energyMeters.each {
-      resp << [id: it.id, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
-    }
-
-	illuminanceMeasurements.each {
-      resp << [id: it.id, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
-    }
-
-	imageCaptures.each {
-      resp << [id: it.id, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
-    }
-
-	locks.each {
-      resp << [id: it.id, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
-    }
-
-	motionSensors.each {
-      resp << [id: it.id, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
-    }
-
-	powerMeters.each {
-      resp << [id: it.id, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
-    }
-
-	presenceSensors.each {
-      resp << [id: it.id, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	relativeHumidityMeasurements.each {
-      resp << [id: it.id, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
-    }
-
-	relaySwitches.each {
-      resp << [id: it.id, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
-    }
-
-	sleepSensors.each {
-      resp << [id: it.id, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
-    }
-
-	smokeDetectors.each {
-      resp << [id: it.id, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
-    }
-
-	switches.each {
-      resp << [id: it.id, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	switchLevels.each {
-      resp << [id: it.id, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
-    }
-
-	temperatureMeasurements.each {
-      resp << [id: it.id, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
-    }
-
-	//Commented out on 7/23/2016.   This randomly started throwing number format exceptions with either my ecobee or Lyric thermostat.
-	//thermostats.each {
-    //  resp << [id: it.id, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
-    //}
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
-    }
-
-	threeAxes.each {
-      resp << [id: it.id, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
-    }
-
-	touchSensors.each {
-      resp << [id: it.id, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
-    }
-
-	valves.each {
-      resp << [id: it.id, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	waterSensors.each {
-      resp << [id: it.id, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
-    }
-   
-   	//resp << [id: 0, capability: "Heartbeat", attribute: "heartbeat", value: String.valueOf(state.heartbeat)]
-    
-    state.heartbeat = !state.heartbeat
-    
-    return resp
-}
-
-def getCurrentValuesWithDisplayName() {
-    def resp = []    
-        
- 	accelerationSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
-    }
-
-	alarms.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
-    }
-
-	batteries.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
-    }
-
-	beacons.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	buttonGroup.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Button", attribute: "button", value: it.currentValue("button")]
-    }
-
-	carbonMonoxideDetectors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
-    }
-
-	colorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
-    }
-
-	contactSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	doorControls.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
-    }
-
-	energyMeters.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
-    }
-
-	illuminanceMeasurements.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
-    }
-
-	imageCaptures.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
-    }
-
-	locks.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
-    }
-
-	mediaControllers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
-    }
-
-	motionSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
-    }
-
-	musicPlayers.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
-    }
-
-	powerMeters.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
-    }
-
-	presenceSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
-    }
-
-	relativeHumidityMeasurements.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
-    }
-
-	relaySwitches.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
-    }
-
-	signalStrengths.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
-    }
-
-	sleepSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
-    }
-
-	smokeDetectors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
-    }
-
-	stepSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
-    }
-
-	switches.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
-    }
-
-	switchLevels.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
-    }
-
-	temperatureMeasurements.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
-    }
-
-	//Commented out on 7/23/2016.   This randomly started throwing number format exceptions with either my ecobee or Lyric thermostat.
-	//thermostats.each {
-    //  resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
-    //}
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
-    }
-
-	thermostats.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
-    }
-
-	threeAxes.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
-    }
-
-	touchSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
-    }
-
-	valves.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
-    }
-
-	waterSensors.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
-    }
-   
-    momentaries.each {
-      resp << [id: it.id, displayName: it.displayName, capability: "Momentary", attribute: "", value: ""]
-    }
-   
-    //resp << [id: 0, displayName: "Heartbeat", capability: "Heartbeat", attribute: "heartbeat", value: state.heartbeat]
-    
-    return resp
-}
-
-def getDevices(capability){
-
-	def result
-
-	switch (capability) {
-    	case "Alarm":
-        	result = alarms
-        	break
-    	case "ColorControl":
-        	result = colorControls
-        	break
-    	case "DoorControl":
-        	result = doorControls
-        	break
-        case "ImageCapture":
-        	result = imageCaptures
-        	break
-    	case "Lock":
-        	result = locks
-        	break
-        case "MediaController":
-        	result = mediaControllers
-        	break
-    	case "Momentary":
-        	result = momentaries
-        	break
-        case "MusicPlayer":
-        	result = musicPlayers
-        	break
-        case "RelaySwitch":
-        	result = relaySwitches
-        	break
-    	case "SpeechSynthesis":
-        	result = speechSyntheses
-        	break
-    	case "Switch":
-        	result = switches
-        	break
-        case "SwitchLevel":
-        	result = switchLevels
-        	break
-    	case "Thermostat":
-        	result = thermostats
-        	break
-		case "ThermostatCoolingSetpoint":
-        	result = thermostatCoolingSetpoints
-        	break
-    	case "ThermostatFanMode":
-        	result = thermostatFanModes
-        	break
-        case "ThermostatHeatingSetpoint":
-        	result = thermostatHeatingSetpoints
-        	break
-    	case "ThermostatMode":
-        	result = thermostatModes
-        	break
-    	case "Tone":
-        	result = tones
-        	break
-        case "Valve":
-        	result = valves
-        	break     
-    	default:
-        	result = valves
-	}
-	return result
-}
-
-def getDoorControlCommand(value){
-	def result
-	switch (value) {
-        case "closed":
-        	result = "close"
-        	break
-    	case "open":
-        	result = "open"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getLockCommand(value){
-	def result
-	switch (value) {
-        case "locked":
-        	result = "lock"
-        	break
-    	case "unlocked":
-        	result = "unlock"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getMuteCommand(value){
-	def result
-	switch (value) {
-        case "muted":
-        	result = "mute"
-        	break
-    	case "unmuted":
-        	result = "unmute"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getContactCommand(value){
-	def result
-	switch (value) {
-        case "closed":
-        	result = "close"
-        	break
-    	case "open":
-        	result = "open"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-def getRoutines() {
-	return location.helloHome?.getPhrases()*.label
-}
-
-def getThermostatFanModeCommand(value){
-	def result
-	switch (value) {
-        case "on":
-        	result = "fanOn"
-        	break
-    	case "auto":
-        	result = "fanAuto"
-        	break
-    	case "circulate":
-        	result = "fanCirculate"
-        	break
-    	default:
-        	result = value
-	}    
-	return result
-}
-
-void executeCommand() {    
-    def deviceId = request.JSON?.deviceId
-    def capability = request.JSON?.capability
-    def attribute = request.JSON?.attribute 
-    def value = request.JSON?.value    
-    if (deviceId) {
-		def devices = getDevices(capability)
-        def command
-        def valueIsParameter = false
-        def valueIsInteger = false
-        switch (attribute) {    	       	
-        	case "hue":
-        		command = "setHue"
-                valueIsParameter = true
-                valueIsInteger = true
-        		break
-    		case "saturation":
-        		command = "setSaturation"
-                valueIsParameter = true
-                valueIsInteger = true
-        		break
-    		case "color":
-        		command = "setColor"
-                def rgb = hexToRgb(value)
-                def hsl = rgbToHSL(rgb)
-                value = [hue:hsl.h.toInteger(), saturation:hsl.s.toInteger()]
-                valueIsParameter = true				
-        		break
-			case "level":
-        		command = "setLevel"
-                valueIsParameter = true
-                valueIsInteger = true
-        		break            
-        	case "heatingSetpoint":
-        		command = "setHeatingSetpoint"
-                valueIsParameter = true
-        		break    
-       		case "coolingSetpoint":
-        		command = "setCoolingSetpoint"
-                valueIsParameter = true
-        		break
-          	case "currentActivity":
-        		command = "startActivity"
-                valueIsParameter = true
-        		break  
- 	  		case "door":
-        		command = getDoorControlCommand(value)
-        		break    
-      		case "lock":
-        		command = getLockCommand(value)
-        		break           
-      		case "mute":
-        		command = getMuteCommand(value)
-        		break         
-      		case "thermostatFanMode":
-        		command = getThermostatFanModeCommand(value)
-        		break         
-       		case "thermostatMode":
-        		if (value == "emergency heat") {
-                	command = "emergencyHeat"
-           		}
-                else
-                {
-                    command = value
-                }
-        		break     
-      		case "contact":
-        		command = getContactCommand(value)
-        		break
-    		default:
-        		command = value
-		}
-        devices.each {
-        	if (it.id == deviceId) {
-                // check that the device supports the specified command
-                // If not, return an error using httpError, providing a HTTP status code.
-            	if (!it.hasCommand(command)) {
-                	httpError(501, "$command is not a valid command for the device")
-            	}                
-                if(valueIsParameter){
-                	if(valueIsInteger){
-                		it."$command"(value as int)
-                	}
-                	else{
-                		it."$command"(value)
-                	}   
-                }
-                else{
-                	it."$command"()
-                }   
-           }       
-        }
-    }
-}
-
-void executeRoutine() {   
-	def routine = request.JSON?.routine
-    location.helloHome?.execute(routine)
-}
-
-def rgbToHSL(rgb) {
-	def r = rgb.r / 255
-    def g = rgb.g / 255
-    def b = rgb.b / 255
-    def h = 0
-    def s = 0
-    def l = 0
-    
-    def var_min = [r,g,b].min()
-    def var_max = [r,g,b].max()
-    def del_max = var_max - var_min
-    
-    l = (var_max + var_min) / 2
-    
-    if (del_max == 0) {
-            h = 0
-            s = 0
-    } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
-        else { s = del_max / (2 - var_max - var_min) }
-
-        def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
-        def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
-        def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
-
-        if (r == var_max) { h = del_b - del_g } 
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
-        else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-        
-		if (h < 0) { h += 1 }
-        if (h > 1) { h -= 1 }
-	}
-    def hsl = [:]    
-    hsl = [h: h * 100, s: s * 100, l: l]
-    
-    hsl
-}
-
-def hexToRgb(colorHex) {
-	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
-    def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
-    def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-    
-    def colorData = [:]
-    colorData = [r: rrInt, g: ggInt, b: bbInt]
-    colorData
-}
-
-def installed() {
-	state.heartbeat = false
-}
-
-def updated() {
-	state.heartbeat = false
-}