MSA-1599: Following the Benson steps for using iris smart plug

devicetypes/blebson/iris-smart-plug.src/iris-smart-plug.groovy

@@ -0,0 +1,241 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
+ *
+ *	Author: SmartThings
+ *	Date: 2015-08-23
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Iris Smart Plug", namespace: "blebson", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Energy Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"     
+		attribute "timerStart", "number"
+
+		attribute "energyDisplay", "string"
+		attribute "elapsedTimeDisplay", "string"
+
+		command "resetEnergyUsage"
+
+		fingerprint profileId: "0104", inClusters: "0000 0003 0004 0005 0006 0B04 0B05 FC03", outClusters: "0019", manufacturer: "CentraLite",  model: "3210-L", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+        
+        section("Reporting Intervals") {
+        	input "intervalMin", "number", title: "Minimum interval between reports [s]", defaultValue: 5, range: "1..600"
+        	input "intervalMax", "number", title: "Maximum interval between reports [s]", defaultValue: 600, range: "1..600"
+        }
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+        
+		valueTile("energyDisplay", "device.energyDisplay", width: 5, height: 1, decoration: "flat") {
+			state "default", label:'Energy used: ${currentValue}', unit: "kWh"
+        	}
+        	
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        
+		standardTile("resetUsage", "command.resetEnergyUsage", decoration: "flat", width: 1, height: 1){
+			state "default", action: "resetEnergyUsage", label:'Reset kWh', icon:"st.Health & Wellness.health7"
+		}        
+        
+		valueTile("elapsedTimeDisplay", "device.elapsedTimeDisplay", decoration: "flat", width: 5, height: 1){
+			state "default", label: 'Time: ${currentValue}', unit: "h"
+		}      
+
+		standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"configure", icon:"st.secondary.configure"
+		}
+
+		main "switch"
+		details(["switch","energyDisplay","resetUsage","power","elapsedTimeDisplay","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+	if (state.timerStart == null)
+	{
+		state.timerStart = Calendar.getInstance().getTimeInMillis()
+		state.energy = 0.0
+	}
+
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10           
+			sendEvent(name: "power", value: powerValue, isStateChange: true, displayed: false) // note: stateChange = true added so the energy calculation can work properly
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/           
+			calculateAndShowEnergy()
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
+	}
+}
+
+def calculateAndShowEnergy()
+{
+    def recentEvents = device.statesSince("power", new Date()-1, [max: 2]).collect {[value: it.value as float, date: it.date]}        	
+    def deltaT = (recentEvents[0].date.getTime() - recentEvents[1].date.getTime()) // time since last "power" event in milliseconds
+    deltaT = deltaT / 3600000 // convert to hours
+    
+    def energyValue = device.currentValue("energy") 
+    if(energyValue != null) {
+    	energyValue += (recentEvents[1].value * deltaT) / 1000 // energy used since last "power" event in kWh 
+    }
+    
+    sendEvent(name: "energy", value: energyValue, displayed: false)
+    sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",energyValue), displayed: false)
+
+    def currentTime = Calendar.getInstance().getTimeInMillis()   
+    def timeDifference = ((long)currentTime - state.timerStart)/1000; // in seconds
+    int h = (int) (timeDifference / (3600));
+    int m = (int) ((timeDifference - (h * 3600)) / 60);
+    int s = (int) (timeDifference - (h * 3600) - m * 60);
+    int d = (int) h >= 24 ? h / 24 : 0
+    h = d > 0 ? h % 24 : h
+
+    sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", d, h, m, s), displayed: false)
+}
+
+def off() {
+	zigbee.off()
+}
+
+def on() {
+	zigbee.on()
+}
+
+def resetEnergyUsage() {
+	sendEvent(name: "energy", value: 0.0, displayed: false)
+	state.timerStart = Calendar.getInstance().getTimeInMillis()
+	sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",0.0), displayed: false)
+	sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", 0, 0, 0, 0), displayed: false)
+}
+
+def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
+	return zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+}
+
+def configure() {
+	log.debug "Configuring..."
+	return zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+def updated() {
+	response(configure())
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 ${intervalMin ?: 5} ${intervalMax ?: 600} {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

devicetypes/smartthings-users/nest.src/nest.groovy

@@ -1,600 +0,0 @@
-/**
- *  Nest Direct
- *
- *  Author: dianoga7@3dgo.net
- *  Code: https://github.com/smartthings-users/device-type.nest
- *
- * INSTALLATION
- * =========================================
- * 1) Create a new device type (https://graph.api.smartthings.com/ide/devices)
- *     Name: Nest
- *     Author: dianoga7@3dgo.net
- *     Capabilities:
- *         Polling
- *         Relative Humidity Measurement
- *         Thermostat
- *         Temperature Measurement
- *         Presence Sensor
- *         Sensor
- *     Custom Attributes:
- *         temperatureUnit
- *     Custom Commands:
- *         away
- *         present
- *         setPresence
- *         heatingSetpointUp
- *         heatingSetpointDown
- *         coolingSetpointUp
- *         coolingSetpointDown
- *         setFahrenheit
- *         setCelsius
- *
- * 2) If you want to switch from slider controls to buttons, comment out the slider details line and uncomment the button details line.
- *
- * 3) Create a new device (https://graph.api.smartthings.com/device/list)
- *     Name: Your Choice
- *     Device Network Id: Your Choice
- *     Type: Nest (should be the last option)
- *     Location: Choose the correct location
- *     Hub/Group: Leave blank
- *
- * 4) Update device preferences
- *     Click on the new device to see the details.
- *     Click the edit button next to Preferences
- *     Fill in your information.
- *     To find your serial number, login to http://home.nest.com. Click on the thermostat
- *     you want to control. Under settings, go to Technical Info. Your serial number is
- *     the second item.
- *
- * 5) That's it, you're done.
- *
- * Copyright (C) 2013 Brian Steere <dianoga7@3dgo.net>
- * Permission is hereby granted, free of charge, to any person obtaining a copy of this
- * software and associated documentation files (the "Software"), to deal in the Software
- * without restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to the following
- * conditions: The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
- * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
- * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
- * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- */
-
-preferences {
-	input("username", "text", title: "Username", description: "Your Nest username (usually an email address)")
-	input("password", "password", title: "Password", description: "Your Nest password")
-	input("serial", "text", title: "Serial #", description: "The serial number of your thermostat")
-}
-
-// for the UI
-metadata {
-	definition (name: "Nest", namespace: "smartthings-users", author: "dianoga7@3dgo.net") {
-		capability "Polling"
-		capability "Relative Humidity Measurement"
-		capability "Thermostat"
-		capability "Temperature Measurement"
-		capability "Presence Sensor"
-		capability "Sensor"
-
-		command "away"
-		command "present"
-		command "setPresence"
-		command "heatingSetpointUp"
-		command "heatingSetpointDown"
-		command "coolingSetpointUp"
-		command "coolingSetpointDown"
-		command "setFahrenheit"
-		command "setCelsius"
-
-		attribute "temperatureUnit", "string"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		valueTile("temperature", "device.temperature", canChangeIcon: true, canChangeBackground:true) {
-			state("temperature", label: '${currentValue}°', backgroundColors: [
-				// Celsius Color Range
-				[value: 0, color: "#153591"],
-				[value: 7, color: "#1e9cbb"],
-				[value: 15, color: "#90d2a7"],
-				[value: 23, color: "#44b621"],
-				[value: 29, color: "#f1d801"],
-				[value: 33, color: "#d04e00"],
-				[value: 36, color: "#bc2323"],
-				// Fahrenheit Color Range
-				[value: 40, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 96, color: "#bc2323"]
-			]
-			)
-		}
-
-		standardTile("thermostatMode", "device.thermostatMode", inactiveLabel: true, decoration: "flat") {
-			state("auto", action:"thermostat.off", icon: "st.thermostat.auto")
-			state("off", action:"thermostat.cool", icon: "st.thermostat.heating-cooling-off")
-			state("cool", action:"thermostat.heat", icon: "st.thermostat.cool")
-			state("heat", action:"thermostat.auto", icon: "st.thermostat.heat")
-		}
-
-		standardTile("thermostatFanMode", "device.thermostatFanMode", inactiveLabel: true, decoration: "flat") {
-			state "auto", action:"thermostat.fanOn", icon: "st.thermostat.fan-auto"
-			state "on", action:"thermostat.fanCirculate", icon: "st.thermostat.fan-on"
-			state "circulate", action:"thermostat.fanAuto", icon: "st.thermostat.fan-circulate"
-		}
-
-		valueTile("heatingSetpoint", "device.heatingSetpoint") {
-			state "default", label:'${currentValue}°', unit:"Heat", backgroundColor:"#bc2323"
-		}
-
-		valueTile("coolingSetpoint", "device.coolingSetpoint") {
-			state "default", label:'${currentValue}°', unit:"Cool", backgroundColor:"#1e9cbb"
-		}
-
-		standardTile("thermostatOperatingState", "device.thermostatOperatingState", inactiveLabel: false, decoration: "flat") {
-			state "idle", action:"polling.poll", label:'${name}', icon: "st.sonos.pause-icon"
-			state "cooling", action:"polling.poll", label:'  ', icon: "st.thermostat.cooling", backgroundColor:"#1e9cbb"
-			state "heating", action:"polling.poll", label:'  ', icon: "st.thermostat.heating", backgroundColor:"#bc2323"
-			state "fan only", action:"polling.poll", label:'${name}', icon: "st.Appliances.appliances11"
-		}
-
-		valueTile("humidity", "device.humidity", inactiveLabel: false) {
-			state "default", label:'${currentValue}%', unit:"Humidity"
-		}
-
-		standardTile("presence", "device.presence", inactiveLabel: false, decoration: "flat") {
-			state "present", label:'${name}', action:"away", icon: "st.Home.home2"
-			state "not present", label:'away', action:"present", icon: "st.Transportation.transportation5"
-		}
-
-		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"polling.poll", icon:"st.secondary.refresh"
-		}
-
-		standardTile("temperatureUnit", "device.temperatureUnit", canChangeIcon: false) {
-			state "fahrenheit",  label: "°F", icon: "st.alarm.temperature.normal", action:"setCelsius"
-			state "celsius", label: "°C", icon: "st.alarm.temperature.normal", action:"setFahrenheit"
-		}
-
-		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", label:'Set temperature to', action:"thermostat.setHeatingSetpoint"
-		}
-		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", label:'Set temperature to', action:"thermostat.setCoolingSetpoint"
-		}
-
-		standardTile("heatingSetpointUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "heatingSetpointUp", label:'  ', action:"heatingSetpointUp", icon:"st.thermostat.thermostat-up", backgroundColor:"#bc2323"
-		}
-
-		standardTile("heatingSetpointDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "heatingSetpointDown", label:'  ', action:"heatingSetpointDown", icon:"st.thermostat.thermostat-down", backgroundColor:"#bc2323"
-		}
-
-		standardTile("coolingSetpointUp", "device.coolingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "coolingSetpointUp", label:'  ', action:"coolingSetpointUp", icon:"st.thermostat.thermostat-up", backgroundColor:"#1e9cbb"
-		}
-
-		standardTile("coolingSetpointDown", "device.coolingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
-			state "coolingSetpointDown", label:'  ', action:"coolingSetpointDown", icon:"st.thermostat.thermostat-down", backgroundColor:"#1e9cbb"
-		}
-
-		main(["temperature", "thermostatOperatingState", "humidity"])
-
-		// ============================================================
-		// Slider or Buttons...
-		// To expose buttons, comment out the first detials line below and uncomment the second details line below.
-		// To expose sliders, uncomment the first details line below and comment out the second details line below.
-
-		details(["temperature", "thermostatOperatingState", "humidity", "thermostatMode", "thermostatFanMode", "presence", "heatingSetpoint", "heatSliderControl", "coolingSetpoint", "coolSliderControl", "temperatureUnit", "refresh"])
-		// details(["temperature", "thermostatOperatingState", "humidity", "thermostatMode", "thermostatFanMode", "presence", "heatingSetpointDown", "heatingSetpoint", "heatingSetpointUp", "coolingSetpointDown", "coolingSetpoint", "coolingSetpointUp", "temperatureUnit", "refresh"])
-
-		// ============================================================
-
-	}
-
-}
-
-// parse events into attributes
-def parse(String description) {
-
-}
-
-// handle commands
-def setHeatingSetpoint(temp) {
-	def latestThermostatMode = device.latestState('thermostatMode')
-	def temperatureUnit = device.latestValue('temperatureUnit')
-
-	switch (temperatureUnit) {
-		case "celsius":
-			if (temp) {
-				if (temp < 9) {
-					temp = 9
-				}
-				if (temp > 32) {
-					temp = 32
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_low': temp]) {
-						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				} else if (latestThermostatMode.stringValue == 'heat') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': temp]) {
-							sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				}
-			}
-			break;
-		default:
-			if (temp) {
-				if (temp < 51) {
-					temp = 51
-				}
-				if (temp > 89) {
-					temp = 89
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_low': fToC(temp)]) {
-						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				} else if (latestThermostatMode.stringValue == 'heat') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': fToC(temp)]) {
-						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-					}
-				}
-			}
-			break;
-	}
-	poll()
-}
-
-def coolingSetpointUp(){
-	int newSetpoint = device.currentValue("coolingSetpoint") + 1
-	log.debug "Setting cool set point up to: ${newSetpoint}"
-	setCoolingSetpoint(newSetpoint)
-}
-
-def coolingSetpointDown(){
-	int newSetpoint = device.currentValue("coolingSetpoint") - 1
-	log.debug "Setting cool set point down to: ${newSetpoint}"
-	setCoolingSetpoint(newSetpoint)
-}
-
-def setCoolingSetpoint(temp) {
-	def latestThermostatMode = device.latestState('thermostatMode')
-	def temperatureUnit = device.latestValue('temperatureUnit')
-
-	switch (temperatureUnit) {
-		case "celsius":
-			if (temp) {
-				if (temp < 9) {
-					temp = 9
-				}
-				if (temp > 32) {
-					temp = 32
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_high': temp]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				} else if (latestThermostatMode.stringValue == 'cool') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': temp]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				}
-			}
-			break;
-		default:
-			if (temp) {
-				if (temp < 51) {
-					temp = 51
-				}
-				if (temp > 89) {
-					temp = 89
-				}
-				if (latestThermostatMode.stringValue == 'auto') {
-					api('temperature', ['target_change_pending': true, 'target_temperature_high': fToC(temp)]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				} else if (latestThermostatMode.stringValue == 'cool') {
-					api('temperature', ['target_change_pending': true, 'target_temperature': fToC(temp)]) {
-						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-					}
-				}
-			}
-			break;
-	}
-	poll()
-}
-
-def heatingSetpointUp(){
-	int newSetpoint = device.currentValue("heatingSetpoint") + 1
-	log.debug "Setting heat set point up to: ${newSetpoint}"
-	setHeatingSetpoint(newSetpoint)
-}
-
-def heatingSetpointDown(){
-	int newSetpoint = device.currentValue("heatingSetpoint") - 1
-	log.debug "Setting heat set point down to: ${newSetpoint}"
-	setHeatingSetpoint(newSetpoint)
-}
-
-def setFahrenheit() {
-	def temperatureUnit = "fahrenheit"
-	log.debug "Setting temperatureUnit to: ${temperatureUnit}"
-	sendEvent(name: "temperatureUnit",   value: temperatureUnit)
-	poll()
-}
-
-def setCelsius() {
-	def temperatureUnit = "celsius"
-	log.debug "Setting temperatureUnit to: ${temperatureUnit}"
-	sendEvent(name: "temperatureUnit",   value: temperatureUnit)
-	poll()
-}
-
-def off() {
-	setThermostatMode('off')
-}
-
-def heat() {
-	setThermostatMode('heat')
-}
-
-def emergencyHeat() {
-	setThermostatMode('heat')
-}
-
-def cool() {
-	setThermostatMode('cool')
-}
-
-def auto() {
-	setThermostatMode('range')
-}
-
-def setThermostatMode(mode) {
-	mode = mode == 'emergency heat'? 'heat' : mode
-
-	api('thermostat_mode', ['target_change_pending': true, 'target_temperature_type': mode]) {
-		mode = mode == 'range' ? 'auto' : mode
-		sendEvent(name: 'thermostatMode', value: mode)
-		poll()
-	}
-}
-
-def fanOn() {
-	setThermostatFanMode('on')
-}
-
-def fanAuto() {
-	setThermostatFanMode('auto')
-}
-
-def fanCirculate() {
-	setThermostatFanMode('circulate')
-}
-
-def setThermostatFanMode(mode) {
-	def modes = [
-		on: ['fan_mode': 'on'],
-		auto: ['fan_mode': 'auto'],
-		circulate: ['fan_mode': 'duty-cycle', 'fan_duty_cycle': 900]
-	]
-
-	api('fan_mode', modes.getAt(mode)) {
-		sendEvent(name: 'thermostatFanMode', value: mode)
-		poll()
-	}
-}
-
-def away() {
-	setPresence('away')
-	sendEvent(name: 'presence', value: 'not present')
-}
-
-def present() {
-	setPresence('present')
-	sendEvent(name: 'presence', value: 'present')
-}
-
-def setPresence(status) {
-	log.debug "Status: $status"
-	api('presence', ['away': status == 'away', 'away_timestamp': new Date().getTime(), 'away_setter': 0]) {
-		poll()
-	}
-}
-
-def poll() {
-	log.debug "Executing 'poll'"
-	api('status', []) {
-		data.device = it.data.device.getAt(settings.serial)
-		data.shared = it.data.shared.getAt(settings.serial)
-		data.structureId = it.data.link.getAt(settings.serial).structure.tokenize('.')[1]
-		data.structure = it.data.structure.getAt(data.structureId)
-
-		data.device.fan_mode = data.device.fan_mode == 'duty-cycle'? 'circulate' : data.device.fan_mode
-		data.structure.away = data.structure.away ? 'away' : 'present'
-
-		log.debug(data.shared)
-
-		def humidity = data.device.current_humidity
-		def temperatureType = data.shared.target_temperature_type
-		def fanMode = data.device.fan_mode
-		def heatingSetpoint = '--'
-		def coolingSetpoint = '--'
-
-		temperatureType = temperatureType == 'range' ? 'auto' : temperatureType
-
-		sendEvent(name: 'humidity', value: humidity)
-		sendEvent(name: 'thermostatFanMode', value: fanMode)
-		sendEvent(name: 'thermostatMode', value: temperatureType)
-
-		def temperatureUnit = device.latestValue('temperatureUnit')
-
-		switch (temperatureUnit) {
-			case "celsius":
-				def temperature = Math.round(data.shared.current_temperature)
-				def targetTemperature = Math.round(data.shared.target_temperature)
-
-				if (temperatureType == "cool") {
-					coolingSetpoint = targetTemperature
-				} else if (temperatureType == "heat") {
-					heatingSetpoint = targetTemperature
-				} else if (temperatureType == "auto") {
-					coolingSetpoint = Math.round(data.shared.target_temperature_high)
-					heatingSetpoint = Math.round(data.shared.target_temperature_low)
-				}
-
-				sendEvent(name: 'temperature', value: temperature, unit: temperatureUnit, state: temperatureType)
-				sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-				sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-				break;
-			default:
-				def temperature = Math.round(cToF(data.shared.current_temperature))
-				def targetTemperature = Math.round(cToF(data.shared.target_temperature))
-
-				if (temperatureType == "cool") {
-					coolingSetpoint = targetTemperature
-				} else if (temperatureType == "heat") {
-					heatingSetpoint = targetTemperature
-				} else if (temperatureType == "auto") {
-					coolingSetpoint = Math.round(cToF(data.shared.target_temperature_high))
-					heatingSetpoint = Math.round(cToF(data.shared.target_temperature_low))
-				}
-
-				sendEvent(name: 'temperature', value: temperature, unit: temperatureUnit, state: temperatureType)
-				sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
-				sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
-				break;
-			}
-
-		switch (device.latestValue('presence')) {
-			case "present":
-				if (data.structure.away == 'away') {
-					sendEvent(name: 'presence', value: 'not present')
-				}
-				break;
-			case "not present":
-				if (data.structure.away == 'present') {
-					sendEvent(name: 'presence', value: 'present')
-				}
-				break;
-		}
-
-		if (data.shared.hvac_ac_state) {
-			sendEvent(name: 'thermostatOperatingState', value: "cooling")
-		} else if (data.shared.hvac_heater_state) {
-			sendEvent(name: 'thermostatOperatingState', value: "heating")
-		} else if (data.shared.hvac_fan_state) {
-			sendEvent(name: 'thermostatOperatingState', value: "fan only")
-		} else {
-			sendEvent(name: 'thermostatOperatingState', value: "idle")
-		}
-	}
-}
-
-def api(method, args = [], success = {}) {
-	if(!isLoggedIn()) {
-		log.debug "Need to login"
-		login(method, args, success)
-		return
-	}
-
-	def methods = [
-		'status': [uri: "/v2/mobile/${data.auth.user}", type: 'get'],
-		'fan_mode': [uri: "/v2/put/device.${settings.serial}", type: 'post'],
-		'thermostat_mode': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
-		'temperature': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
-		'presence': [uri: "/v2/put/structure.${data.structureId}", type: 'post']
-	]
-
-	def request = methods.getAt(method)
-
-	log.debug "Logged in"
-	doRequest(request.uri, args, request.type, success)
-}
-
-// Need to be logged in before this is called. So don't call this. Call api.
-def doRequest(uri, args, type, success) {
-	log.debug "Calling $type : $uri : $args"
-
-	if(uri.charAt(0) == '/') {
-		uri = "${data.auth.urls.transport_url}${uri}"
-	}
-
-	def params = [
-		uri: uri,
-		headers: [
-			'X-nl-protocol-version': 1,
-			'X-nl-user-id': data.auth.userid,
-			'Authorization': "Basic ${data.auth.access_token}"
-		],
-		body: args
-	]
-
-	def postRequest = { response ->
-		if (response.getStatus() == 302) {
-			def locations = response.getHeaders("Location")
-			def location = locations[0].getValue()
-			log.debug "redirecting to ${location}"
-			doRequest(location, args, type, success)
-		} else {
-			success.call(response)
-		}
-	}
-
-	try {
-		if (type == 'post') {
-			httpPostJson(params, postRequest)
-		} else if (type == 'get') {
-			httpGet(params, postRequest)
-		}
-	} catch (Throwable e) {
-		login()
-	}
-}
-
-def login(method = null, args = [], success = {}) {
-	def params = [
-		uri: 'https://home.nest.com/user/login',
-		body: [username: settings.username, password: settings.password]
-	]
-
-	httpPost(params) {response ->
-		data.auth = response.data
-		data.auth.expires_in = Date.parse('EEE, dd-MMM-yyyy HH:mm:ss z', response.data.expires_in).getTime()
-		log.debug data.auth
-
-		api(method, args, success)
-	}
-}
-
-def isLoggedIn() {
-	if(!data.auth) {
-		log.debug "No data.auth"
-		return false
-	}
-
-	def now = new Date().getTime();
-	return data.auth.expires_in > now
-}
-
-def cToF(temp) {
-	return (temp * 1.8 + 32).toDouble()
-}
-
-def fToC(temp) {
-	return ((temp - 32) / 1.8).toDouble()
-}

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }
 
 def updated() {