MSA-1599: Following the Benson steps for using iris smart plug

devicetypes/blebson/iris-smart-plug.src/iris-smart-plug.groovy

@@ -0,0 +1,241 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	SmartPower Outlet (CentraLite)
+ *
+ *	Author: SmartThings
+ *	Date: 2015-08-23
+ */
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Iris Smart Plug", namespace: "blebson", author: "SmartThings") {
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Energy Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+
+		// indicates that device keeps track of heartbeat (in state.heartbeat)
+		attribute "heartbeat", "string"     
+		attribute "timerStart", "number"
+
+		attribute "energyDisplay", "string"
+		attribute "elapsedTimeDisplay", "string"
+
+		command "resetEnergyUsage"
+
+		fingerprint profileId: "0104", inClusters: "0000 0003 0004 0005 0006 0B04 0B05 FC03", outClusters: "0019", manufacturer: "CentraLite",  model: "3210-L", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
+				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
+				])
+		}
+        
+        section("Reporting Intervals") {
+        	input "intervalMin", "number", title: "Minimum interval between reports [s]", defaultValue: 5, range: "1..600"
+        	input "intervalMax", "number", title: "Maximum interval between reports [s]", defaultValue: 600, range: "1..600"
+        }
+	}
+
+	// UI tile definitions
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+        
+		valueTile("energyDisplay", "device.energyDisplay", width: 5, height: 1, decoration: "flat") {
+			state "default", label:'Energy used: ${currentValue}', unit: "kWh"
+        	}
+        	
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        
+		standardTile("resetUsage", "command.resetEnergyUsage", decoration: "flat", width: 1, height: 1){
+			state "default", action: "resetEnergyUsage", label:'Reset kWh', icon:"st.Health & Wellness.health7"
+		}        
+        
+		valueTile("elapsedTimeDisplay", "device.elapsedTimeDisplay", decoration: "flat", width: 5, height: 1){
+			state "default", label: 'Time: ${currentValue}', unit: "h"
+		}      
+
+		standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+			state "default", label:"", action:"configure", icon:"st.secondary.configure"
+		}
+
+		main "switch"
+		details(["switch","energyDisplay","resetUsage","power","elapsedTimeDisplay","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	// save heartbeat (i.e. last time we got a message from device)
+	state.heartbeat = Calendar.getInstance().getTimeInMillis()
+	if (state.timerStart == null)
+	{
+		state.timerStart = Calendar.getInstance().getTimeInMillis()
+		state.energy = 0.0
+	}
+
+	def finalResult = zigbee.getKnownDescription(description)
+
+	//TODO: Remove this after getKnownDescription can parse it automatically
+	if (!finalResult && description!="updated")
+		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
+
+	if (finalResult) {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10           
+			sendEvent(name: "power", value: powerValue, isStateChange: true, displayed: false) // note: stateChange = true added so the energy calculation can work properly
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/           
+			calculateAndShowEnergy()
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug zigbee.parseDescriptionAsMap(description)
+	}
+}
+
+def calculateAndShowEnergy()
+{
+    def recentEvents = device.statesSince("power", new Date()-1, [max: 2]).collect {[value: it.value as float, date: it.date]}        	
+    def deltaT = (recentEvents[0].date.getTime() - recentEvents[1].date.getTime()) // time since last "power" event in milliseconds
+    deltaT = deltaT / 3600000 // convert to hours
+    
+    def energyValue = device.currentValue("energy") 
+    if(energyValue != null) {
+    	energyValue += (recentEvents[1].value * deltaT) / 1000 // energy used since last "power" event in kWh 
+    }
+    
+    sendEvent(name: "energy", value: energyValue, displayed: false)
+    sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",energyValue), displayed: false)
+
+    def currentTime = Calendar.getInstance().getTimeInMillis()   
+    def timeDifference = ((long)currentTime - state.timerStart)/1000; // in seconds
+    int h = (int) (timeDifference / (3600));
+    int m = (int) ((timeDifference - (h * 3600)) / 60);
+    int s = (int) (timeDifference - (h * 3600) - m * 60);
+    int d = (int) h >= 24 ? h / 24 : 0
+    h = d > 0 ? h % 24 : h
+
+    sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", d, h, m, s), displayed: false)
+}
+
+def off() {
+	zigbee.off()
+}
+
+def on() {
+	zigbee.on()
+}
+
+def resetEnergyUsage() {
+	sendEvent(name: "energy", value: 0.0, displayed: false)
+	state.timerStart = Calendar.getInstance().getTimeInMillis()
+	sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",0.0), displayed: false)
+	sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", 0, 0, 0, 0), displayed: false)
+}
+
+def refresh() {
+	sendEvent(name: "heartbeat", value: "alive", displayed:false)
+	return zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
+}
+
+def configure() {
+	log.debug "Configuring..."
+	return zigbee.onOffConfig() + powerConfig() + refresh()
+}
+
+def updated() {
+	response(configure())
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 01
+def powerConfig() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
+		"zcl global send-me-a-report 0x0B04 0x050B 0x29 ${intervalMin ?: 5} ${intervalMax ?: 600} {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+//TODO: Remove this after getKnownDescription can parse it automatically
+def getPowerDescription(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0B04") {
+		if (descMap.attrId == "050b") {
+			if(descMap.value!="ffff")
+				powerValue = zigbee.convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0B04") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0B04) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return [:]
+	}
+}

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }
 
 private getAccelerationResult(numValue) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }
 
 def updated() {

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.info "Life360 initializeLife360Connection, response=${result.data}"
+		log.debug "Response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.error "Life360 initializeLife360Connection, error: $e"
+       log.debug e
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.info "Life360 generateInitialEvent($member, $childDevice)"
+    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,8 +677,6 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
-
-			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -720,7 +718,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
+	log.debug "In placeEventHandler method."
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -731,6 +729,8 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
+    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
+
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Life360 event raised on child device: ${externalId}"
+    		log.debug "Event raised on child device: ${externalId}"
 		}
    		else {
-    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
+    		log.debug "Couldn't find child device associated with inbound Life360 event."
     	}
     }