Modifying 'staring my 1st app'

devicetypes/adf/fibaro-roller-shutter.src/fibaro-roller-shutter.groovy

@@ -1,345 +0,0 @@
-/**
- *  Device Type Definition File
- *
- *  Device Type:		Fibaro Roller Shutter
- *  File Name:			fibaro-roller-shutter.groovy
- *	Initial Release:	2015-06-00
- *	Author:				SmartThings
- *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "Fibaro Roller Shutter", namespace: "ADF", author: "ADF") {
-		capability "Switch Level"
-		capability "Actuator"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Sensor"
-                        
-        command		"resetParams2StDefaults"
-        command		"listCurrentParams"
-        command		"updateZwaveParam"
-
-        fingerprint deviceId: "0x1101", inClusters: "0x72,0x86,0x70,0x85,0x8E,0x26,0x7A,0x27,0x73,0xEF,0x26,0x2B"
-	}
-
-	simulator {
-		status "on":  "command: 2003, payload: FF"
-		status "off": "command: 2003, payload: 00"
-		status "09%": "command: 2003, payload: 09"
-		status "10%": "command: 2003, payload: 0A"
-		status "33%": "command: 2003, payload: 21"
-		status "66%": "command: 2003, payload: 42"
-		status "99%": "command: 2003, payload: 63"
-
-		// reply messages
-		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
-		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
-		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
-		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
-		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
-		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
-	}
-
-	tiles {
-            multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-            tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState("on", label:"open", action:"switch.off", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState: "turningOff")
-				attributeState("off", label:"close", action:"switch.on", icon:"st.doors.garage.garage-closed", backgroundColor:"#ffffff", nextState: "turningOn")
-                attributeState("turningOn", label:"opening", action:"switch.off", icon:"st.doors.garage.garage-opening", backgroundColor:"#79b821", nextState: "turningOff")
-                attributeState("turningOff", label:"closing", action:"switch.on", icon:"st.doors.garage.garage-closing", backgroundColor:"#ffffff", nextState:"turningOn")
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState("level", action:"switch level.setLevel")
-            }
-        }
-		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-        standardTile("on", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-            state("on", label:'open', action:"switch.on", icon:"st.doors.garage.garage-opening")
-        	}
-        standardTile("off", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-            state("off", label:'close', action:"switch.off", icon:"st.doors.garage.garage-closing")
-        	}
-        standardTile("stop", "device.level", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-            state("default", label:'stop/my', action:"switch level.setLevel", icon:"st.Transportation.transportation13")
-        	}
-            
-		main(["switch"])
-		details(["switch", "refresh", "on", "off", "stop"])
-	}
-}
-
-def parse(String description) {
-	def item1 = [
-		canBeCurrentState: false,
-		linkText: getLinkText(device),
-		isStateChange: false,
-		displayed: false,
-		descriptionText: description,
-		value:  description
-	]
-	def result
-	def cmd = zwave.parse(description, [0x26: 1, 0x70: 2, 072: 2])
-    //log.debug "cmd: ${cmd}"
-    
-    if (cmd) {
-        result = createEvent(cmd, item1)
-	}
-	else {
-		item1.displayed = displayed(description, item1.isStateChange)
-		result = [item1]
-	}
-    
-    if(result?.descriptionText)
-		log.debug "Parse returned ${result?.descriptionText}"
-        
-	result
-
-}
-
-def createEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStartLevelChange cmd, Map item1) {
-	[]
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd, Map item1) {
-	[response(zwave.basicV1.basicGet())]
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	result[0].descriptionText = "${item1.linkText} is ${item1.value}"
-	result[0].handlerName = cmd.value ? "statusOn" : "statusOff"
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "digital"
-	}
-	result
-}
-
-def doCreateEvent(physicalgraph.zwave.Command cmd, Map item1) {
-	def result = [item1]
-
-	item1.name = "switch"
-	item1.value = cmd.value ? "on" : "off"
-	item1.handlerName = item1.value
-	item1.descriptionText = "${item1.linkText} was turned ${item1.value}"
-	item1.canBeCurrentState = true
-	item1.isStateChange = isStateChange(device, item1.name, item1.value)
-	item1.displayed = item1.isStateChange
-
-	if (cmd.value >= 5) {
-		def item2 = new LinkedHashMap(item1)
-		item2.name = "level"
-		item2.value = cmd.value as String
-		item2.unit = "%"
-		item2.descriptionText = "${item1.linkText} dimmed ${item2.value} %"
-		item2.canBeCurrentState = true
-		item2.isStateChange = isStateChange(device, item2.name, item2.value)
-		item2.displayed = false
-		result << item2
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
-	// Handles any Z-Wave commands we aren't interested in
-	log.debug "UNHANDLED COMMAND $cmd"
-}
-
-def on() {
-	log.info "on"
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
-}
-
-def off() {
-	delayBetween ([zwave.basicV1.basicSet(value: 0x00).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
-}
-
-def setLevel(value) {
-    def level = Math.min(value as Integer, 99)
-	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
-}
-
-def setLevel(value, duration) {
-    def level = Math.min(value as Integer, 99)
-	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
-	zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format()
-}
-
-def poll() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
-def refresh() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
- /**
- * Configures the device to settings needed by SmarthThings at device discovery time. Assumes
- * device is already at default parameter settings.
- *
- * @param none
- *
- * @return none
- */
-def configure() {
-	log.debug "Configuring Device..."
-	def cmds = []
-
-	// send associate to group 3 to get sensor data reported only to hub
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
-
-
-	delayBetween(cmds, 500)
-}
-
-
-def createEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd, Map item1) {
-
-	log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
-
-}
-
- /**
- * This method will allow the user to update device parameters (behavior) from an app.
- * the user can write his/her own app to envoke this method. 
- * No type or value checking is done to compare to what device capability or reaction.
- * It is up to user to read OEM documentation prio to envoking this method.
- * 
- * <p>THIS IS AN ADVANCED OPERATION. USE AT YOUR OWN RISK! READ OEM DOCUMENTATION!
- *
- * @param List[paramNumber:80,value:10,size:1]
- *
- *
- * @return none
- */
-def updateZwaveParam(params) {
-	if ( params ) {
-        def pNumber = params.paramNumber
-        def pSize	= params.size
-        def pValue	= [params.value]
-        log.debug "Make sure device is awake and in recieve mode"
-        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
-
-		def cmds = []
-        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1000)        
-    }
-}
-
- /**
- * Sets all of available Fibaro parameters back to the device defaults except for what
- * SmartThings needs to support the stock functionality as released. 
- *
- * <p>THIS IS AN ADVANCED OPERATION. USE AT YOUR OWN RISK! READ OEM DOCUMENTATION!
- *
- * @param none
- *
- * @return none
- */
-def resetParams2StDefaults() {
-	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
-	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 1,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 6,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1],   parameterNumber: 7,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1],   parameterNumber: 8,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [5],   parameterNumber: 9,  size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1],   parameterNumber: 10, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1],   parameterNumber: 11, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [99],  parameterNumber: 12, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [2],   parameterNumber: 13, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 14, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1],   parameterNumber: 15, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [1],   parameterNumber: 16, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 17, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 18, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 19, size: 1).format()
-    //Param 20 is different for 50Hz or 60 Hz uncomment the line that will reflect the power frequency used
-    //cmds << zwave.configurationV1.configurationSet(configurationValue: [101],   parameterNumber: 20, size: 1).format() //60 Hz (US)
-    //cmds << zwave.configurationV1.configurationSet(configurationValue: [110],   parameterNumber: 20, size: 1).format() //50 Hz (UK)
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [3],   parameterNumber: 30, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [600],   parameterNumber: 39, size: 1).format()
-    //Param 40 not needed by SmartThings
-    //cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 40, size: 1).format()
-    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],   parameterNumber: 41, size: 1).format()
-    
-    delayBetween(cmds, 500)
-}
-
- /**
- * Lists all of available Fibaro parameters and thier current settings out to the 
- * logging window in the IDE. This will be called from the "Fibaro Tweaker" or 
- * user's own app.
- *
- * <p>THIS IS AN ADVANCED OPERATION. USE AT YOUR OWN RISK! READ OEM DOCUMENTATION!
- *
- * @param none
- *
- * @return none
- */
-def listCurrentParams() {
-	log.debug "Listing of current parameter settings of ${device.displayName}"
-    def cmds = []
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 6).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 8).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 11).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 14).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 15).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 16).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 17).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 18).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 19).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 20).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 30).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 39).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 40).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 41).format()
-    
-	delayBetween(cmds, 500)
-}

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -22,10 +22,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }
 
 private getAccelerationResult(numValue) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }
 
 def updated() {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -24,10 +24,6 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -25,9 +25,6 @@ metadata {
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
-		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.info "Life360 initializeLife360Connection, response=${result.data}"
+		log.debug "Response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.error "Life360 initializeLife360Connection, error: $e"
+       log.debug e
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.info "Life360 generateInitialEvent($member, $childDevice)"
+    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,8 +677,6 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
-
-			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -720,7 +718,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
+	log.debug "In placeEventHandler method."
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -731,6 +729,8 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
+    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
+
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Life360 event raised on child device: ${externalId}"
+    		log.debug "Event raised on child device: ${externalId}"
 		}
    		else {
-    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
+    		log.debug "Couldn't find child device associated with inbound Life360 event."
     	}
     }
 

smartapps/thehomeremote-homeremote/home-remote.src/home-remote.groovy

@@ -0,0 +1,799 @@
+/** *  Home Remote
+ *
+ *  Copyright 2015 The Home Remote
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Home Remote",
+    namespace: "thehomeremote.homeremote",
+    author: "The Home Remote",
+    description: "Web service that enables communication between the Home Remote app and a SmartThings hub.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "The Home Remote", displayLink: "http://thehomeremote.com/"])
+
+
+preferences {
+    section() {
+	input "accelerationSensors", "capability.accelerationSensor",title: "Acceleration Sensors", multiple: true, required: false
+	input "alarms", "capability.alarm",title: "Alarms", multiple: true, required: false
+	input "batteries", "capability.battery",title: "Batteries", multiple: true, required: false
+	input "beacons", "capability.beacon",title: "Beacons", multiple: true, required: false
+	input "buttonGroup", "capability.button",title: "Buttons", multiple: true, required: false
+	input "carbonMonoxideDetectors", "capability.carbonMonoxideDetector",title: "CO Detectors", multiple: true, required: false
+	input "colorControls", "capability.colorControl",title: "Color Lights", multiple: true, required: false
+	input "contactSensors", "capability.contactSensor",title: "Contact Sensors", multiple: true, required: false
+	input "doorControls", "capability.doorControl",title: "Door Controllers", multiple: true, required: false
+	input "energyMeters", "capability.energyMeter",title: "Energy Meters", multiple: true, required: false
+	input "illuminanceMeasurements", "capability.illuminanceMeasurement",title: "Illuminance Sensors", multiple: true, required: false
+	input "imageCaptures", "capability.imageCapture",title: "Cameras", multiple: true, required: false
+	input "locks", "capability.lock",title: "Locks", multiple: true, required: false
+	input "mediaControllers", "capability.mediaController",title: "Media Controllers", multiple: true, required: false
+	input "momentaries", "capability.momentary",title: "Momentary Buttons", multiple: true, required: false
+	input "motionSensors", "capability.motionSensor",title: "Motion Sensors", multiple: true, required: false
+	input "musicPlayers", "capability.musicPlayer",title: "Music Players", multiple: true, required: false
+	input "powerMeters", "capability.powerMeter",title: "Power Meters", multiple: true, required: false
+	input "presenceSensors", "capability.presenceSensor",title: "Presence Sensors", multiple: true, required: false
+	input "relativeHumidityMeasurements", "capability.relativeHumidityMeasurement",title: "Humidity Sensors", multiple: true, required: false
+	input "relaySwitches", "capability.relaySwitch",title: "Relays", multiple: true, required: false
+	input "signalStrengths", "capability.signalStrength",title: "Signal Strengths", multiple: true, required: false
+	input "sleepSensors", "capability.sleepSensor",title: "Sleep Sensors", multiple: true, required: false
+	input "smokeDetectors", "capability.smokeDetector",title: "Smoke Detectors", multiple: true, required: false
+	input "speechSyntheses", "capability.speechSynthesis",title: "Speech Syntheses", multiple: true, required: false
+	input "stepSensors", "capability.stepSensor",title: "Step Sensors", multiple: true, required: false
+	input "switches", "capability.switch",title: "Switches", multiple: true, required: false
+	input "switchLevels", "capability.switchLevel",title: "Dimmers", multiple: true, required: false
+	input "temperatureMeasurements", "capability.temperatureMeasurement",title: "Temperature Sensors", multiple: true, required: false
+	input "thermostats", "capability.thermostat",title: "Thermostats", multiple: true, required: false
+	input "threeAxes", "capability.threeAxis",title: "Three axis Sensors", multiple: true, required: false
+	input "tones", "capability.tone",title: "Tones", multiple: true, required: false
+	input "touchSensors", "capability.touchSensor",title: "Touch Sensors", multiple: true, required: false
+	input "valves", "capability.valve",title: "Valves", multiple: true, required: false
+	input "waterSensors", "capability.waterSensor",title: "Water Sensors", multiple: true, required: false
+    }
+}
+
+mappings {
+  path("/GetCurrentValues") {
+    action: [
+      GET: "getCurrentValues"
+    ]
+  }
+  path("/GetCurrentValuesWithDisplayName") {
+    action: [
+      GET: "getCurrentValuesWithDisplayName"
+    ]
+  }
+  path("/GetRoutines") {
+    action: [
+      GET: "getRoutines"
+    ]
+  }
+  path("/ExecuteCommand") {
+    action: [
+      PUT: "executeCommand"
+    ]
+  }
+  path("/ExecuteRoutine") {
+    action: [
+      PUT: "executeRoutine"
+    ]
+  }
+}
+
+def getCurrentValues() {
+    def resp = []    
+        
+ 	accelerationSensors.each {
+      resp << [id: it.id, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
+    }
+
+	alarms.each {
+      resp << [id: it.id, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
+    }
+
+	batteries.each {
+      resp << [id: it.id, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
+    }
+
+	beacons.each {
+      resp << [id: it.id, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	buttonGroup.each {
+      resp << [id: it.id, capability: "Button", attribute: "button", value: it.currentValue("button")]
+    }
+
+	carbonMonoxideDetectors.each {
+      resp << [id: it.id, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
+    }
+
+	contactSensors.each {
+      resp << [id: it.id, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	doorControls.each {
+      resp << [id: it.id, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
+    }
+
+	energyMeters.each {
+      resp << [id: it.id, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
+    }
+
+	illuminanceMeasurements.each {
+      resp << [id: it.id, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
+    }
+
+	imageCaptures.each {
+      resp << [id: it.id, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
+    }
+
+	locks.each {
+      resp << [id: it.id, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
+    }
+
+	motionSensors.each {
+      resp << [id: it.id, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
+    }
+
+	powerMeters.each {
+      resp << [id: it.id, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
+    }
+
+	presenceSensors.each {
+      resp << [id: it.id, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	relativeHumidityMeasurements.each {
+      resp << [id: it.id, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
+    }
+
+	relaySwitches.each {
+      resp << [id: it.id, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
+    }
+
+	sleepSensors.each {
+      resp << [id: it.id, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
+    }
+
+	smokeDetectors.each {
+      resp << [id: it.id, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
+    }
+
+	switches.each {
+      resp << [id: it.id, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	switchLevels.each {
+      resp << [id: it.id, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
+    }
+
+	temperatureMeasurements.each {
+      resp << [id: it.id, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
+    }
+
+	//Commented out on 7/23/2016.   This randomly started throwing number format exceptions with either my ecobee or Lyric thermostat.
+	//thermostats.each {
+    //  resp << [id: it.id, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
+    //}
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
+    }
+
+	threeAxes.each {
+      resp << [id: it.id, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
+    }
+
+	touchSensors.each {
+      resp << [id: it.id, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
+    }
+
+	valves.each {
+      resp << [id: it.id, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	waterSensors.each {
+      resp << [id: it.id, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
+    }
+   
+   	//resp << [id: 0, capability: "Heartbeat", attribute: "heartbeat", value: String.valueOf(state.heartbeat)]
+    
+    state.heartbeat = !state.heartbeat
+    
+    return resp
+}
+
+def getCurrentValuesWithDisplayName() {
+    def resp = []    
+        
+ 	accelerationSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "AccelerationSensor", attribute: "acceleration", value: it.currentValue("acceleration")]
+    }
+
+	alarms.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Alarm", attribute: "alarm", value: it.currentValue("alarm")]
+    }
+
+	batteries.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Battery", attribute: "battery", value: it.currentValue("battery")]
+    }
+
+	beacons.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Beacon", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	buttonGroup.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Button", attribute: "button", value: it.currentValue("button")]
+    }
+
+	carbonMonoxideDetectors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "CarbonMonoxideDetector", attribute: "carbonMonoxide", value: it.currentValue("carbonMonoxide")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "hue", value: it.currentValue("hue")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "saturation", value: it.currentValue("saturation")]
+    }
+
+	colorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ColorControl", attribute: "color", value: it.currentValue("color")]
+    }
+
+	contactSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ContactSensor", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	doorControls.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "DoorControl", attribute: "door", value: it.currentValue("door")]
+    }
+
+	energyMeters.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "EnergyMeter", attribute: "energy", value: it.currentValue("energy")]
+    }
+
+	illuminanceMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "IlluminanceMeasurement", attribute: "illuminance", value: it.currentValue("illuminance")]
+    }
+
+	imageCaptures.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ImageCapture", attribute: "image", value: it.currentValue("image")]
+    }
+
+	locks.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Lock", attribute: "lock", value: it.currentValue("lock")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "activities", value: it.currentValue("activities")]
+    }
+
+	mediaControllers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MediaController", attribute: "currentActivity", value: it.currentValue("currentActivity")]
+    }
+
+	motionSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MotionSensor", attribute: "motion", value: it.currentValue("motion")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "status", value: it.currentValue("status")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "level", value: it.currentValue("level")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackDescription", value: it.currentValue("trackDescription")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "trackData", value: it.currentValue("trackData")]
+    }
+
+	musicPlayers.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "MusicPlayer", attribute: "mute", value: it.currentValue("mute")]
+    }
+
+	powerMeters.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "PowerMeter", attribute: "power", value: it.currentValue("power")]
+    }
+
+	presenceSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "PresenceSensor", attribute: "presence", value: it.currentValue("presence")]
+    }
+
+	relativeHumidityMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "RelativeHumidityMeasurement", attribute: "humidity", value: it.currentValue("humidity")]
+    }
+
+	relaySwitches.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "RelaySwitch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "lqi", value: it.currentValue("lqi")]
+    }
+
+	signalStrengths.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SignalStrength", attribute: "rssi", value: it.currentValue("rssi")]
+    }
+
+	sleepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SleepSensor", attribute: "sleeping", value: it.currentValue("sleeping")]
+    }
+
+	smokeDetectors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SmokeDetector", attribute: "smoke", value: it.currentValue("smoke")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "steps", value: it.currentValue("steps")]
+    }
+
+	stepSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "StepSensor", attribute: "goal", value: it.currentValue("goal")]
+    }
+
+	switches.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Switch", attribute: "switch", value: it.currentValue("switch")]
+    }
+
+	switchLevels.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "SwitchLevel", attribute: "level", value: it.currentValue("level")]
+    }
+
+	temperatureMeasurements.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "TemperatureMeasurement", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "temperature", value: it.currentValue("temperature")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "heatingSetpoint", value: it.currentValue("heatingSetpoint")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "coolingSetpoint", value: it.currentValue("coolingSetpoint")]
+    }
+
+	//Commented out on 7/23/2016.   This randomly started throwing number format exceptions with either my ecobee or Lyric thermostat.
+	//thermostats.each {
+    //  resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatSetpoint", value: it.currentValue("thermostatSetpoint")]
+    //}
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatMode", value: it.currentValue("thermostatMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatFanMode", value: it.currentValue("thermostatFanMode")]
+    }
+
+	thermostats.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Thermostat", attribute: "thermostatOperatingState", value: it.currentValue("thermostatOperatingState")]
+    }
+
+	threeAxes.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "ThreeAxis", attribute: "threeAxis", value: it.currentValue("threeAxis")]
+    }
+
+	touchSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "TouchSensor", attribute: "touch", value: it.currentValue("touch")]
+    }
+
+	valves.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Valve", attribute: "contact", value: it.currentValue("contact")]
+    }
+
+	waterSensors.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "WaterSensor", attribute: "water", value: it.currentValue("water")]
+    }
+   
+    momentaries.each {
+      resp << [id: it.id, displayName: it.displayName, capability: "Momentary", attribute: "", value: ""]
+    }
+   
+    //resp << [id: 0, displayName: "Heartbeat", capability: "Heartbeat", attribute: "heartbeat", value: state.heartbeat]
+    
+    return resp
+}
+
+def getDevices(capability){
+
+	def result
+
+	switch (capability) {
+    	case "Alarm":
+        	result = alarms
+        	break
+    	case "ColorControl":
+        	result = colorControls
+        	break
+    	case "DoorControl":
+        	result = doorControls
+        	break
+        case "ImageCapture":
+        	result = imageCaptures
+        	break
+    	case "Lock":
+        	result = locks
+        	break
+        case "MediaController":
+        	result = mediaControllers
+        	break
+    	case "Momentary":
+        	result = momentaries
+        	break
+        case "MusicPlayer":
+        	result = musicPlayers
+        	break
+        case "RelaySwitch":
+        	result = relaySwitches
+        	break
+    	case "SpeechSynthesis":
+        	result = speechSyntheses
+        	break
+    	case "Switch":
+        	result = switches
+        	break
+        case "SwitchLevel":
+        	result = switchLevels
+        	break
+    	case "Thermostat":
+        	result = thermostats
+        	break
+		case "ThermostatCoolingSetpoint":
+        	result = thermostatCoolingSetpoints
+        	break
+    	case "ThermostatFanMode":
+        	result = thermostatFanModes
+        	break
+        case "ThermostatHeatingSetpoint":
+        	result = thermostatHeatingSetpoints
+        	break
+    	case "ThermostatMode":
+        	result = thermostatModes
+        	break
+    	case "Tone":
+        	result = tones
+        	break
+        case "Valve":
+        	result = valves
+        	break     
+    	default:
+        	result = valves
+	}
+	return result
+}
+
+def getDoorControlCommand(value){
+	def result
+	switch (value) {
+        case "closed":
+        	result = "close"
+        	break
+    	case "open":
+        	result = "open"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getLockCommand(value){
+	def result
+	switch (value) {
+        case "locked":
+        	result = "lock"
+        	break
+    	case "unlocked":
+        	result = "unlock"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getMuteCommand(value){
+	def result
+	switch (value) {
+        case "muted":
+        	result = "mute"
+        	break
+    	case "unmuted":
+        	result = "unmute"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getContactCommand(value){
+	def result
+	switch (value) {
+        case "closed":
+        	result = "close"
+        	break
+    	case "open":
+        	result = "open"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+def getRoutines() {
+	return location.helloHome?.getPhrases()*.label
+}
+
+def getThermostatFanModeCommand(value){
+	def result
+	switch (value) {
+        case "on":
+        	result = "fanOn"
+        	break
+    	case "auto":
+        	result = "fanAuto"
+        	break
+    	case "circulate":
+        	result = "fanCirculate"
+        	break
+    	default:
+        	result = value
+	}    
+	return result
+}
+
+void executeCommand() {    
+    def deviceId = request.JSON?.deviceId
+    def capability = request.JSON?.capability
+    def attribute = request.JSON?.attribute 
+    def value = request.JSON?.value    
+    if (deviceId) {
+		def devices = getDevices(capability)
+        def command
+        def valueIsParameter = false
+        def valueIsInteger = false
+        switch (attribute) {    	       	
+        	case "hue":
+        		command = "setHue"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break
+    		case "saturation":
+        		command = "setSaturation"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break
+    		case "color":
+        		command = "setColor"
+                def rgb = hexToRgb(value)
+                def hsl = rgbToHSL(rgb)
+                value = [hue:hsl.h.toInteger(), saturation:hsl.s.toInteger()]
+                valueIsParameter = true				
+        		break
+			case "level":
+        		command = "setLevel"
+                valueIsParameter = true
+                valueIsInteger = true
+        		break            
+        	case "heatingSetpoint":
+        		command = "setHeatingSetpoint"
+                valueIsParameter = true
+        		break    
+       		case "coolingSetpoint":
+        		command = "setCoolingSetpoint"
+                valueIsParameter = true
+        		break
+          	case "currentActivity":
+        		command = "startActivity"
+                valueIsParameter = true
+        		break  
+ 	  		case "door":
+        		command = getDoorControlCommand(value)
+        		break    
+      		case "lock":
+        		command = getLockCommand(value)
+        		break           
+      		case "mute":
+        		command = getMuteCommand(value)
+        		break         
+      		case "thermostatFanMode":
+        		command = getThermostatFanModeCommand(value)
+        		break         
+       		case "thermostatMode":
+        		if (value == "emergency heat") {
+                	command = "emergencyHeat"
+           		}
+                else
+                {
+                    command = value
+                }
+        		break     
+      		case "contact":
+        		command = getContactCommand(value)
+        		break
+    		default:
+        		command = value
+		}
+        devices.each {
+        	if (it.id == deviceId) {
+                // check that the device supports the specified command
+                // If not, return an error using httpError, providing a HTTP status code.
+            	if (!it.hasCommand(command)) {
+                	httpError(501, "$command is not a valid command for the device")
+            	}                
+                if(valueIsParameter){
+                	if(valueIsInteger){
+                		it."$command"(value as int)
+                	}
+                	else{
+                		it."$command"(value)
+                	}   
+                }
+                else{
+                	it."$command"()
+                }   
+           }       
+        }
+    }
+}
+
+void executeRoutine() {   
+	def routine = request.JSON?.routine
+    location.helloHome?.execute(routine)
+}
+
+def rgbToHSL(rgb) {
+	def r = rgb.r / 255
+    def g = rgb.g / 255
+    def b = rgb.b / 255
+    def h = 0
+    def s = 0
+    def l = 0
+    
+    def var_min = [r,g,b].min()
+    def var_max = [r,g,b].max()
+    def del_max = var_max - var_min
+    
+    l = (var_max + var_min) / 2
+    
+    if (del_max == 0) {
+            h = 0
+            s = 0
+    } else {
+    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
+        else { s = del_max / (2 - var_max - var_min) }
+
+        def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
+        def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
+        def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
+
+        if (r == var_max) { h = del_b - del_g } 
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
+        else if (b == var_max) { h = (2 / 3) + del_g - del_r }
+        
+		if (h < 0) { h += 1 }
+        if (h > 1) { h -= 1 }
+	}
+    def hsl = [:]    
+    hsl = [h: h * 100, s: s * 100, l: l]
+    
+    hsl
+}
+
+def hexToRgb(colorHex) {
+	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
+    def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
+    def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
+    
+    def colorData = [:]
+    colorData = [r: rrInt, g: ggInt, b: bbInt]
+    colorData
+}
+
+def installed() {
+	state.heartbeat = false
+}
+
+def updated() {
+	state.heartbeat = false
+}