Modifying 'Mistake'

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -120,15 +120,6 @@ def configure() {
 	return cmd
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -109,15 +109,6 @@ def configure() {
 	return cmds
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -183,15 +183,6 @@ def updateState(String name, String value) {
 	device.updateDataValue(name, value)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 3)
 }

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -22,10 +22,9 @@ metadata {
 		capability "Sensor"
 		capability "Health Check"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.info "Life360 generatePresenceEvent($present)"
+	log.debug "Here in generatePresenceEvent!"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-motion.src/smartsense-motion.groovy

@@ -57,7 +57,6 @@ def parse(String description) {
 
 private Map parseBasicMessage(description) {
 	def name = parseName(description)
-	def results = [:]
 	if (name != null) {
 		def value = parseValue(description)
 		def linkText = getLinkText(device)
@@ -65,7 +64,7 @@ private Map parseBasicMessage(description) {
 		def handlerName = value
 		def isStateChange = isStateChange(device, name, value)
 
-		results = [
+		def results = [
 				name           : name,
 				value          : value,
 				linkText       : linkText,
@@ -74,6 +73,8 @@ private Map parseBasicMessage(description) {
 				isStateChange  : isStateChange,
 				displayed      : displayed(description, isStateChange)
 		]
+	} else {
+		results = [:]
 	}
 	log.debug "Parse returned $results.descriptionText"
 	return results

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
+	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
 }
 
 private getAccelerationResult(numValue) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
+						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/testing/simulated-minimote.src/simulated-minimote.groovy

@@ -126,15 +126,6 @@ private hold(button) {
 	sendEvent(name: "button", value: "held", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was held", isStateChange: true)
 }
 
-
-def installed() {
-	initialize()
-}
-
 def updated() {
-	initialize()
-}
-
-def initialize() {
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -23,11 +23,9 @@ metadata {
 
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart BR30 Soft White"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -28,8 +28,8 @@ metadata {
 		capability "Switch Level"
 		capability "Health Check"
 
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
-		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "SYLVANIA Smart Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Gardenspot RGB", deviceJoinName: "OSRAM LIGHTIFY Gardenspot mini RGB"
 	}
 
 	// UI tile definitions

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -32,12 +32,11 @@ metadata {
         attribute "colorName", "string"
         command "setGenericName"
 
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "SYLVANIA Smart Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY Flex RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "SYLVANIA Smart A19 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "SYLVANIA Smart BR30 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "SYLVANIA Smart RT5/6 RGBW"
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY FLEX OUTDOOR RGBW", deviceJoinName: "SYLVANIA Smart Outdoor RGBW Flex"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Flex RGBW", deviceJoinName: "OSRAM LIGHTIFY LED FLEXIBLE STRIP RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED A19 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR RGBW", deviceJoinName: "OSRAM LIGHTIFY LED BR30 RGBW"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04,FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT RGBW", deviceJoinName: "OSRAM LIGHTIFY LED RT 5/6 RGBW"
     }
 
     // UI tile definitions

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -32,10 +32,10 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04", outClusters: "0019"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "SYLVANIA Smart BR30 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "SYLVANIA Smart RT5/6 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "SYLVANIA Smart A19 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY BR Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Flood BR30 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY RT Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Recessed Kit RT 5/6 Tunable White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 Tunable White", deviceJoinName: "OSRAM LIGHTIFY LED Tunable White 60W"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic B40 TW - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY Classic B40 Tunable White"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 0702, 0B05", outClusters: "0019", manufacturer: "sengled", model: "Z01-A19NAE26", deviceJoinName: "Sengled Element plus"
     }

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    configureHealthCheck()
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+    configureHealthCheck()
 }
 
 def updated() {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -24,10 +24,6 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
-		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
-		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
-		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
-		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-door-sensor-as-smoke-detector.src/zwave-door-sensor-as-smoke-detector.groovy

@@ -1,273 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Z-Wave Door/Window Sensor
- *
- *  Author: SmartThings
- *  Date: 2013-11-3
- */
-
-metadata {
-	definition (name: "Z-Wave Door Sensor as Smoke Detector", namespace: "smartthings", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Sensor"
-		capability "Battery"
-		capability "Configuration"
-
-		fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x85,0x86,0x72"
-		fingerprint deviceId: "0x07", inClusters: "0x30"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "fire":  "command: 2001, payload: FF"
-		status "safe": "command: 2001, payload: 00"
-		status "wake up": "command: 8407, payload: "
-	}
-
-	// UI tile definitions
-	tiles {
-		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "fire",label: '${name}',icon: "st.alarm.smoke.smoke",backgroundColor: "#ffa81e"
-			state "safe",label: '${name}',icon: "st.alarm.smoke.clear",backgroundColor: "#79b821"
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main "contact"
-		details(["contact", "battery"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			log.debug description
-		} else {
-			result = createEvent(
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				isStateChange: true,
-			)
-		}
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-	log.debug "parsed '$description' to $result"
-	return result
-}
-
-def updated() {
-	def cmds = []
-	if (!state.MSR) {
-		cmds = [
-			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
-			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-		]
-	} else if (!state.lastbat) {
-		cmds = []
-	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
-	}
-	response(cmds)
-}
-
-def configure() {
-	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
-	], 6000)
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "contact", value: "fire", descriptionText: "$device.displayName fire detected")
-	} else {
-		createEvent(name: "contact", value: "safe", descriptionText: "$device.displayName is safe")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
-{
-	sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
-{
-	sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
-{
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
-			result << sensorValueEvent(cmd.v1AlarmLevel)
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
-			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
-{
-	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	def cmds = []
-	if (!state.MSR) {
-		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		cmds << "delay 1200"
-	}
-	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << command(zwave.batteryV1.batteryGet())
-	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-	}
-	[event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	state.lastbat = now()
-	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	log.debug "msr: $msr"
-	updateDataValue("MSR", msr)
-
-	retypeBasedOnMSR()
-
-	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
-
-	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
-		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	} else if (!device.currentState("battery")) {
-		if (msr == "0086-0102-0059") {
-			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
-		} else {
-			result << response(command(zwave.batteryV1.batteryGet()))
-		}
-	}
-
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
-	// log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
-}
-
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec == 1) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
-	}
-}
-
-private commands(commands, delay=200) {
-	delayBetween(commands.collect{ command(it) }, delay)
-}
-
-def retypeBasedOnMSR() {
-	switch (state.MSR) {
-		case "0086-0002-002D":
-			log.debug "Changing device type to Z-Wave Water Sensor"
-			setDeviceType("Z-Wave Water Sensor")
-			break
-		case "011F-0001-0001":  // Schlage motion
-		case "014A-0001-0001":  // Ecolink motion
-		case "014A-0004-0001":  // Ecolink motion +
-		case "0060-0001-0002":  // Everspring SP814
-		case "0060-0001-0003":  // Everspring HSP02
-		case "011A-0601-0901":  // Enerwave ZWN-BPC
-			log.debug "Changing device type to Z-Wave Motion Sensor"
-			setDeviceType("Z-Wave Motion Sensor")
-			break
-		case "013C-0002-000D":  // Philio multi +
-			log.debug "Changing device type to 3-in-1 Multisensor Plus (SG)"
-			setDeviceType("3-in-1 Multisensor Plus (SG)")
-			break
-		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
-			setDeviceType("Z-Wave Plus Door/Window Sensor")
-			break
-		case "0109-2002-0205": // Vision Motion
-			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
-			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
-			break
-	}
-}

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -25,9 +25,6 @@ metadata {
 		fingerprint mfr:"0063", prod:"4F50", model:"3031", deviceJoinName: "GE Plug-in Outdoor Switch"
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
-		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
-		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}
 
 	// simulator metadata

smartapps/lawsonautomation/ventilation-guru.src/ventilation-guru.groovy

@@ -0,0 +1,64 @@
+
+/**
+ *  Ventilation Guru
+ *
+ *  Copyright 2016 Tom Lawson
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ 
+
+ */
+ 
+definition(
+    name: "Ventilation Guru",
+    namespace: "LawsonAutomation",
+    author: "Tom Lawson",
+    description: "This was a mistaken publication.",
+    category: "Green Living",
+    iconUrl: "https://raw.githubusercontent.com/lawsonautomation/icons/master/guru-60.png",
+    iconX2Url: "https://raw.githubusercontent.com/lawsonautomation/icons/master/guru-120.png",
+    iconX3Url: "https://raw.githubusercontent.com/lawsonautomation/icons/master/guru-120.png") 
+    
+preferences {
+    page(name: "mainPage")
+}
+
+def mainPage() {
+	state.debugMode = false
+    
+    dynamicPage(name: "mainPage", install: true, uninstall: true) {        
+     	}
+}
+
+    
+def installed() {
+	LOG "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	LOG "Updated with settings: ${settings}"
+    unschedule()
+	unsubscribe()
+	initialize()
+}
+
+// initiallization methods
+
+def initialize() { 
+}
+
+
+def LOG(String text) {
+	if (state.debugMode) {
+    	log.debug(text)
+    }
+}

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.info "Life360 initializeLife360Connection, response=${result.data}"
+		log.debug "Response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.error "Life360 initializeLife360Connection, error: $e"
+       log.debug e
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.info "Life360 generateInitialEvent($member, $childDevice)"
+    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,8 +677,6 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
-
-			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -720,7 +718,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
+	log.debug "In placeEventHandler method."
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -731,6 +729,8 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
+    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
+
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Life360 event raised on child device: ${externalId}"
+    		log.debug "Event raised on child device: ${externalId}"
 		}
    		else {
-    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
+    		log.debug "Couldn't find child device associated with inbound Life360 event."
     	}
     }