MSA-1845: The SmartApp integrates with smartelligynt platform to provide IoT applications to user connecting samsung smartthings and samsung home automation appliance. The platform further extend to provide a connected experience across IOT and smart appliances.

devicetypes/smartthings/aeon-siren.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-siren.src/README.md

@@ -1,37 +0,0 @@
-# Aeon Siren
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Switch** - can detect state (possible values: on/off)
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs Siren (Gen 5) is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -20,11 +20,10 @@ metadata {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
-	capability "Health Check"
 
 	command "test"
 
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
  }
 
  simulator {
@@ -59,9 +58,6 @@ metadata {
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3
 
@@ -152,10 +148,3 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.basicV1.basicGet())
-}

smartapps/jnewland/json-api.src/json-api.groovy

@@ -1,145 +0,0 @@
-/**
- *  JSON
- *
- *  Copyright 2015 Jesse Newland
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "JSON API",
-    namespace: "jnewland",
-    author: "Jesse Newland",
-    description: "A JSON API for SmartThings",
-    category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-def installed() {
-    initialize()
-}
-
-def updated() {
-    unsubscribe()
-    initialize()
-}
-
-def initialize() {
-    if (!state.accessToken) {
-        createAccessToken()
-    }
-}
-
-preferences {
-    page(name: "copyConfig")
-}
-
-def copyConfig() {
-    if (!state.accessToken) {
-        createAccessToken()
-    }
-    dynamicPage(name: "copyConfig", title: "Config", install:true) {
-        section("Select devices to include in the /devices API call") {
-            input "switches", "capability.switch", title: "Switches", multiple: true, required: false
-            input "hues", "capability.colorControl", title: "Hues", multiple: true, required: false
-        }
-
-        section() {
-            paragraph "View this SmartApp's configuration to use it in other places."
-            href url:"https://graph.api.smartthings.com/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
-        }
-
-        section() {
-            href url:"https://graph.api.smartthings.com/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}", style:"embedded", required:false, title:"Debug", description:"View accessories JSON"
-        }
-    }
-}
-
-def renderConfig() {
-    def configJson = new groovy.json.JsonOutput().toJson([
-        description: "JSON API",
-        platforms: [
-            [
-                platform: "SmartThings",
-                name: "SmartThings",
-                app_id:        app.id,
-                access_token:  state.accessToken
-            ]
-        ],
-    ])
-
-    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
-    render contentType: "text/plain", data: configString
-}
-
-def deviceCommandMap(device, type) {
-  device.supportedCommands.collectEntries { command->
-      def commandUrl = "https://graph.api.smartthings.com/api/smartapps/installations/${app.id}/${type}/${device.id}/command/${command.name}?access_token=${state.accessToken}"
-      [
-        (command.name): commandUrl
-      ]
-  }
-}
-
-def authorizedDevices() {
-    [
-        switches: switches,
-        hues: hues
-    ]
-}
-
-def renderDevices() {
-    def deviceData = authorizedDevices().collectEntries { devices->
-        [
-            (devices.key): devices.value.collect { device->
-                [
-                    name: device.displayName,
-                    commands: deviceCommandMap(device, devices.key)
-                ]
-            }
-        ]
-    }
-    def deviceJson    = new groovy.json.JsonOutput().toJson(deviceData)
-    def deviceString  = new groovy.json.JsonOutput().prettyPrint(deviceJson)
-    render contentType: "application/json", data: deviceString
-}
-
-def deviceCommand() {
-  def device  = authorizedDevices()[params.type].find { it.id == params.id }
-  def command = params.command
-  if (!device) {
-      httpError(404, "Device not found")
-  } else {
-      if (params.value) {
-        device."$command"(params.value)
-      } else {
-        device."$command"()
-      }
-  }
-}
-
-mappings {
-    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
-        path("/devices")                      { action: [GET: "authError"] }
-        path("/config")                       { action: [GET: "authError"] }
-        path("/:type/:id/command/:command")   { action: [PUT: "authError"] }
-    } else {
-        path("/devices")                      { action: [GET: "renderDevices"]  }
-        path("/config")                       { action: [GET: "renderConfig"]  }
-        path("/:type/:id/command/:command")   { action: [PUT: "deviceCommand"] }
-    }
-}
-
-def authError() {
-    [error: "Permission denied"]
-}

smartapps/smartelligynt/smartelligynt-smartthings-event-collector.src/smartelligynt-smartthings-event-collector.groovy

@@ -0,0 +1,111 @@
+/**
+ *  smartelligynt smartthings event collector
+ *
+ *  Copyright 2017 Rahul
+ *
+ */
+definition(
+    name: "smartelligynt smartthings event collector",
+    namespace: "smartelligynt",
+    author: "Rahul",
+    description: "samsung smartthings event collector",
+    category: "SmartThings Labs",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "smartelligynt", displayLink: "http://www.smartelligynt.com"])
+
+import groovy.json.JsonSlurper
+
+preferences {
+	section("Select your devices to monitor with smartelligynt") {
+		        input "switches", "capability.switch", title: "Switches", multiple: true, required: false
+                input "contacts", "capability.contactSensor", title: "Contact Sensors", multiple: true, required: false
+                input "accelerometers", "capability.accelerationSensor", title: "Accelerometers", multiple: true, required: false
+
+
+
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+    log.debug "Updated with settings: ${settings}"
+
+    subscribeToDeviceEvents()
+}
+
+def subscribeToDeviceEvents() {
+	log.debug "Updated with settings: ${switches}"
+	if (null  != accelerometers) {
+		subscribe(accelerometers, "acceleration", handleEvents)
+	}
+    if (null  != switches) {
+		subscribe(switches, "switches", handleEvents)
+	}
+    if (null  != contacts) {
+		subscribe(contacts, "contacts", handleEvents)
+	}
+    
+
+}
+
+
+def handleEvents(evt) {
+	log.debug "$evt.displayName($evt.name:$evt.unit) $evt.value"
+
+	if (evt.unit != null) {
+		eventName = "$evt.displayName(${evt.name}_$evt.unit)"
+	}
+	def eventValue = "$evt.value"
+
+	postEvents(eventName, eventValue)
+}
+
+def postEvents(eventName, eventValue)
+{
+	def epoch = now() / 1000
+
+	def jsonSlurper = new JsonSlurper()
+    def txt = "{ \"en\": \"$eventName\", \"ev\" : \"$eventValue\", \"et\" : $epoch }"
+	def object = jsonSlurper.parseText(txt)
+
+	def params = [
+    	uri: "http://collect.smartelligynt.com/api/events/",
+    	body: 
+       		object
+    
+	]
+
+	try {
+    	httpPostJson(params) { resp ->
+        resp.headers.each {
+            log.debug "${it.name} : ${it.value}"
+        }
+        log.debug  "response status code: ${resp.status}"
+        log.debug "response data: ${resp.data}"
+
+    }
+	} catch (e) {
+    	log.debug "something went wrong: $e"
+	}
+
+
+
+}
+
+// TODO : Implement mappings
+// TODO: implement event handlers