Revert "Added health-check for FortrezZ Siren Strobe Alarm"

This reverts commit 7a7a08ea6e.

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -1,57 +0,0 @@
-/**
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Sensor"
-
-		command "open"
-		command "close"
-	}
-
-	tiles {
-		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
-		}
-		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-		}
-		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-		}
-		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
-		}
-		main "contact"
-		details "contact"
-	}
-}
-
-def installed() {
-	sendEvent(name: "contact", value: "closed")
-}
-
-def open() {
-	sendEvent(name: "contact", value: "open")
-	parent.doorOpen(device.deviceNetworkId)
-}
-
-def close() {
-	sendEvent(name: "contact", value: "closed")
-	parent.doorClosed(device.deviceNetworkId)
-}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -1,94 +0,0 @@
-/**
- *  Simulated Refrigerator Temperature Control
- *
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
-		capability "Temperature Measurement"
-		capability "Thermostat Cooling Setpoint"
-
-		command "tempUp"
-		command "tempDown"
-		command "setpointUp"
-		command "setpointDown"
-	}
-
-	tiles {
-		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors:[
-							[value: 0, color: "#153591"],
-							[value: 40, color: "#1e9cbb"],
-							[value: 45, color: "#f1d801"]
-					]
-			)
-		}
-		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors:[
-							[value: 0, color: "#153591"],
-							[value: 5, color: "#1e9cbb"],
-							[value: 15, color: "#f1d801"]
-					]
-			)
-		}
-		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
-		}
-		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
-		}
-		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
-		}
-		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
-		}
-		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
-		}
-		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
-		}
-	}
-}
-
-def installed() {
-	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
-	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
-}
-
-def updated() {
-	installed()
-}
-
-void tempUp() {
-	def value = device.currentValue("temperature") as Integer
-	sendEvent(name: "temperature", value: value + 1)
-}
-
-void tempDown() {
-	def value = device.currentValue("temperature") as Integer
-	sendEvent(name: "temperature", value: value - 1)
-}
-
-void setpointUp() {
-	def value = device.currentValue("coolingSetpoint") as Integer
-	sendEvent(name: "coolingSetpoint", value: value + 1)
-}
-
-void setpointDown() {
-	def value = device.currentValue("coolingSetpoint") as Integer
-	sendEvent(name: "coolingSetpoint", value: value - 1)
-}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -1,91 +0,0 @@
-/**
- *  Simulated Refrigerator
- *
- *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
- *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
- *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
- *  compartment
- *
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
-		capability "Contact Sensor"
-	}
-
-	tiles(scale: 2) {
-		standardTile("contact", "device.contact", width: 4, height: 4) {
-			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
-			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
-		}
-		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
-		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
-		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
-		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
-		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
-		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
-
-		// for simulator
-		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
-		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
-		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
-		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
-		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
-		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
-		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
-		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
-		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
-		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
-	}
-}
-
-def installed() {
-	state.counter = state.counter ? state.counter + 1 : 1
-	if (state.counter == 1) {
-		addChildDevice(
-				"Simulated Refrigerator Door",
-				"${device.deviceNetworkId}.1",
-				null,
-				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
-
-		addChildDevice(
-				"Simulated Refrigerator Door",
-				"${device.deviceNetworkId}.2",
-				null,
-				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
-
-		addChildDevice(
-				"Simulated Refrigerator Temperature Control",
-				"${device.deviceNetworkId}.3",
-				null,
-				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
-
-		addChildDevice(
-				"Simulated Refrigerator Temperature Control",
-				"${device.deviceNetworkId}.3",
-				null,
-				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
-	}
-}
-
-def doorOpen(dni) {
-	// If any door opens, then the refrigerator is considered to be open
-	sendEvent(name: "contact", value: "open")
-}
-
-def doorClosed(dni) {
-	// Both doors must be closed for the refrigerator to be considered closed
-	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
-		sendEvent(name: "contact", value: "closed")
-	}
-}

devicetypes/smartthings/zwave-siren.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-siren.src/README.md

@@ -1,42 +0,0 @@
-# Z-wave Siren
-
-Cloud Execution
-
-Works with: 
-
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Switch** - can detect state (possible values: on/off)
-
-## Device Health
-
-FortrezZ Siren Strobe Alarm is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
-		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -28,7 +27,6 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
-		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -60,11 +58,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -126,13 +119,6 @@ def both() {
 	on()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()