Merge pull request #1894 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -1,57 +0,0 @@
-/**
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
-		capability "Contact Sensor"
-		capability "Sensor"
-
-		command "open"
-		command "close"
-	}
-
-	tiles {
-		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
-		}
-		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-		}
-		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-		}
-		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
-		}
-		main "contact"
-		details "contact"
-	}
-}
-
-def installed() {
-	sendEvent(name: "contact", value: "closed")
-}
-
-def open() {
-	sendEvent(name: "contact", value: "open")
-	parent.doorOpen(device.deviceNetworkId)
-}
-
-def close() {
-	sendEvent(name: "contact", value: "closed")
-	parent.doorClosed(device.deviceNetworkId)
-}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -1,94 +0,0 @@
-/**
- *  Simulated Refrigerator Temperature Control
- *
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
-		capability "Temperature Measurement"
-		capability "Thermostat Cooling Setpoint"
-
-		command "tempUp"
-		command "tempDown"
-		command "setpointUp"
-		command "setpointDown"
-	}
-
-	tiles {
-		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors:[
-							[value: 0, color: "#153591"],
-							[value: 40, color: "#1e9cbb"],
-							[value: 45, color: "#f1d801"]
-					]
-			)
-		}
-		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
-			state("temperature", label:'${currentValue}°', unit:"F",
-					backgroundColors:[
-							[value: 0, color: "#153591"],
-							[value: 5, color: "#1e9cbb"],
-							[value: 15, color: "#f1d801"]
-					]
-			)
-		}
-		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
-		}
-		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
-		}
-		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
-		}
-		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
-		}
-		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
-		}
-		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
-		}
-	}
-}
-
-def installed() {
-	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
-	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
-}
-
-def updated() {
-	installed()
-}
-
-void tempUp() {
-	def value = device.currentValue("temperature") as Integer
-	sendEvent(name: "temperature", value: value + 1)
-}
-
-void tempDown() {
-	def value = device.currentValue("temperature") as Integer
-	sendEvent(name: "temperature", value: value - 1)
-}
-
-void setpointUp() {
-	def value = device.currentValue("coolingSetpoint") as Integer
-	sendEvent(name: "coolingSetpoint", value: value + 1)
-}
-
-void setpointDown() {
-	def value = device.currentValue("coolingSetpoint") as Integer
-	sendEvent(name: "coolingSetpoint", value: value - 1)
-}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -1,91 +0,0 @@
-/**
- *  Simulated Refrigerator
- *
- *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
- *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
- *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
- *  compartment
- *
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
-		capability "Contact Sensor"
-	}
-
-	tiles(scale: 2) {
-		standardTile("contact", "device.contact", width: 4, height: 4) {
-			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
-			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
-		}
-		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
-		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
-		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
-		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
-		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
-		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
-
-		// for simulator
-		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
-		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
-		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
-		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
-		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
-		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
-		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
-		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
-		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
-		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
-	}
-}
-
-def installed() {
-	state.counter = state.counter ? state.counter + 1 : 1
-	if (state.counter == 1) {
-		addChildDevice(
-				"Simulated Refrigerator Door",
-				"${device.deviceNetworkId}.1",
-				null,
-				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
-
-		addChildDevice(
-				"Simulated Refrigerator Door",
-				"${device.deviceNetworkId}.2",
-				null,
-				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
-
-		addChildDevice(
-				"Simulated Refrigerator Temperature Control",
-				"${device.deviceNetworkId}.3",
-				null,
-				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
-
-		addChildDevice(
-				"Simulated Refrigerator Temperature Control",
-				"${device.deviceNetworkId}.3",
-				null,
-				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
-	}
-}
-
-def doorOpen(dni) {
-	// If any door opens, then the refrigerator is considered to be open
-	sendEvent(name: "contact", value: "open")
-}
-
-def doorClosed(dni) {
-	// Both doors must be closed for the refrigerator to be considered closed
-	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
-		sendEvent(name: "contact", value: "closed")
-	}
-}