MSA-1937: Smart bed

Rolling down staging hotfix to master

devicetypes/drzwave/ezmultipli.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/drzwave/ezmultipli.src/README.md

@@ -0,0 +1,44 @@
+# Express Controls EZMultiPli
+
+Works with: 
+
+* [Express Controls EZMultiPli](https://www.smartthings.com/works-with-smartthings/)
+
+## Table of contents
+
+* [Release Notes](#release-notes)
+* [Capabilities](#capabilities)
+* [Troubleshooting](#troubleshooting)
+
+## Release Notes
+
+* **2017-04-19** - _dkirker_ - Update default config values in config value range check functions, use lux if lum option is null, fix NullPointerException on initial pairing when color data has not been set (and set the default color data!)
+* **2017-04-10** - _DrZwave_ (with help from Donald Kirker) - changed fingerprint to the new format, lowered the OnTime and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+* **2016-10-06** - _erocm1231_ - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+* **2016-01-28** - _erocm1231_ - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers. Also, added configurationGet and a configurationReport method so that config values can be verified.
+* **2015-12-04** - _erocm1231_ - added range value to preferences as suggested by @Dela-Rick.
+* **2015-11-26** - _erocm1231_ - Fixed null condition error when adding as a new device. 
+* **2015-11-24** - _erocm1231_ - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed the device not having its on/off status updated when colors are changed.
+* **2015-11-23** - _erocm1231_ - Changed the look to match SmartThings v2 devices. 
+* **2015-11-21** - _erocm1231_ - Made code much more efficient. Also made it compatible when setColor is passed a hex value. Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, Daylight - Energize - Teal, Warm White - Relax - Yellow
+* **2015-11-19** - _erocm1231_ - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+* **2015-11-18** - _erocm1231_ - Added to setColor for compatibility with Smart Lighting
+* **v0.1.0** - _DrZWave_ - chose better icons, Got color LED to work - first fully functional version
+* **v0.0.9** - _jrs_ - got the temp and luminance to work. Motion works. Debugging the color wheel.
+* **v0.0.8** - _DrZWave_ 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+* **v0.0.7** - _jrs_ - 02/23/2015 - Jim Sulin
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Sensor** - detects sensor events
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Switch** - can detect state (possible values: on/off)
+* **Color Control** - represents that the color attributes of a device can be controlled (hue, saturation, color value
+* **Configuration** - configure() command called when device is installed or device preferences updated
+* **Refresh** - refresh() command for status updates
+
+## Troubleshooting
+

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -2,27 +2,6 @@
 // Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
 // driver for SmartThings
 // The EZMultiPli is also known as the HSM200 from HomeSeer.com
-//
-// 2017-04-10 - DrZwave (with help from Don Kirker) - changed fingerprint to the new format, lowered the OnTime 
-//              and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
-// 2016-10-06 - erocm1231 - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being
-//              reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
-// 2016-01-28 - erocm1231 - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers.
-//              Also, added configurationGet and a configurationReport method so that config values can be verified.
-// 2015-12-04 - erocm1231 - added range value to preferences as suggested by @Dela-Rick.
-// 2015-11-26 - erocm1231 - Fixed null condition error when adding as a new device. 
-// 2015-11-24 - erocm1231 - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed 
-//              the device not having its on/off status updated when colors are changed.
-// 2015-11-23 - erocm1231 - Changed the look to match SmartThings v2 devices. 
-// 2015-11-21 - erocm1231 - Made code much more efficient. Also made it compatible when setColor is passed a hex value.
-//              Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, 
-//              Daylight - Energize - Teal, Warm White - Relax - Yellow
-// 2015-11-19 - erocm1231 - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
-// 2015-11-18 - erocm1231 - Added to setColor for compatibility with Smart Lighting
-// v0.1.0 - DrZWave - chose better icons, Got color LED to work - first fully functional version
-// v0.0.9 - jrs - got the temp and luminance to work. Motion works. Debugging the color wheel.
-// v0.0.8 - DrZWave 2/25/2015 - change the color control to be tiles since there are only 8 colors.
-// v0.0.7 - jrs - 02/23/2015 - Jim Sulin
 
 metadata {
 	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
@@ -131,7 +110,6 @@ metadata {
 
 } // end metadata
 
-
 // Parse incoming device messages from device to generate events
 def parse(String description){
 	//log.debug "==> New Zwave Event: ${description}"
@@ -145,7 +123,7 @@ def parse(String description){
     
     def statusTextmsg = ""
     if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
-		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == "" || lum == null || lum == 1) ? "%" : "LUX"}"
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == 1) ? "%" : "LUX"}"
     	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
 	}
     if (result != [null] && result != []) log.debug "Parse returned ${result}"
@@ -168,7 +146,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 			break;
 		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
 			map.value = cmd.scaledSensorValue.toInteger().toString()
-            if(lum == "" || lum == null || lum == 1) map.unit = "%"
+            if(lum == 1) map.unit = "%"
             else map.unit = "lux"
 			map.name = "illuminance"
 			log.debug "Luminance report"
@@ -203,7 +181,8 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-    if (cmd.value == 0 && device.latestState("color").value != "#ffffff") {
+    // The EZMultiPli sets the color back to #ffffff on "off" or at init, so update the ST device to reflect this.
+    if (device.latestState("color") == null || (cmd.value == 0 && device.latestState("color").value != "#ffffff")) {
         sendEvent(name: "color", value: "#ffffff", displayed: true)
     }
     [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
@@ -296,12 +275,12 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 // ensure we are passing acceptable param values for LiteMin & TempMin configs
 def checkLiteTempInput(value) {
 	if (value == null) {
-    	value=60
+    	value=6
     }
     def liteTempVal = value.toInteger()
     switch (liteTempVal) {
       case { it < 0 }:
-        return 60			// bad value, set to default
+        return 6			// bad value, set to default
         break
       case { it > 127 }:
         return 127			// bad value, greater then MAX, set to MAX
@@ -314,12 +293,12 @@ def checkLiteTempInput(value) {
 // ensure we are passing acceptable param value for OnTime config
 def checkOnTimeInput(value) {
 	if (value == null) {
-    	value=10
+    	value=2
     }
     def onTimeVal = value.toInteger()
     switch (onTimeVal) {
       case { it < 0 }:
-        return 10			// bad value set to default
+        return 2			// bad value set to default
         break
       case { it > 127 }:
         return 127			// bad value, greater then MAX, set to MAX

devicetypes/happy-new/kad.src/kad.groovy

@@ -0,0 +1,900 @@
+/**
+ *  kad
+ *
+ *  Copyright 2017 Kadeem Coleman
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "kad", namespace: "happy new ", author: "Kadeem Coleman") {
+		capability "Acceleration Sensor"
+		capability "Actuator"
+		capability "Alarm"
+		capability "Alarm System"
+		capability "Alarm System Arm Only"
+		capability "Astronomical Data"
+		capability "Audio Notification"
+		capability "Battery"
+		capability "Beacon"
+		capability "Bridge"
+		capability "Buffered Video Capture"
+		capability "Bulb"
+		capability "Button"
+		capability "Carbon Dioxide Measurement"
+		capability "Carbon Monoxide Detector"
+		capability "Color Control"
+		capability "Color Temperature"
+		capability "Configuration"
+		capability "Consumable"
+		capability "Contact Sensor"
+		capability "Door Control"
+		capability "Energy Meter"
+		capability "Estimated Time Of Arrival"
+		capability "Garage Door Control"
+		capability "Health Check"
+		capability "Image Capture"
+		capability "Indicator"
+		capability "Infrared Level"
+		capability "Light"
+		capability "Light"
+		capability "Lock"
+		capability "Lock Codes"
+		capability "Lock Only"
+		capability "Media Controller"
+		capability "Momentary"
+		capability "Motion Sensor"
+		capability "Music Player"
+		capability "Ocf"
+		capability "Outlet"
+		capability "pH Measurement"
+		capability "Polling"
+		capability "Power"
+		capability "Power Meter"
+		capability "Power Source"
+		capability "Presence Sensor"
+		capability "Refresh"
+		capability "Relay Switch"
+		capability "Samsung TV"
+		capability "Sensor"
+		capability "Shock Sensor"
+		capability "Signal Strength"
+		capability "Sleep Sensor"
+		capability "Smoke Detector"
+		capability "Sound Sensor"
+		capability "Speech Recognition"
+		capability "Speech Synthesis"
+		capability "Switch"
+		capability "Switch Level"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Test Capability"
+		capability "Thermostat"
+		capability "Thermostat Cooling Setpoint"
+		capability "Thermostat Fan Mode"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+		capability "Thermostat Operating State"
+		capability "Thermostat Setpoint"
+		capability "Three Axis"
+		capability "Timed Session"
+		capability "Tone"
+		capability "Touch Sensor"
+		capability "Ultraviolet Index"
+		capability "Valve"
+		capability "Video Camera"
+		capability "Video Capture"
+		capability "Voltage Measurement"
+		capability "Water Sensor"
+		capability "Window Shade"
+		capability "Zw Multichannel"
+	}
+
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'acceleration' attribute
+	// TODO: handle 'alarm' attribute
+	// TODO: handle 'alarmSystemStatus' attribute
+	// TODO: handle 'alarmSystemStatus' attribute
+	// TODO: handle 'sunrise' attribute
+	// TODO: handle 'sunset' attribute
+	// TODO: handle 'sunriseTime' attribute
+	// TODO: handle 'sunsetTime' attribute
+	// TODO: handle 'battery' attribute
+	// TODO: handle 'presence' attribute
+	// TODO: handle 'clip' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'button' attribute
+	// TODO: handle 'numberOfButtons' attribute
+	// TODO: handle 'carbonDioxide' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'hue' attribute
+	// TODO: handle 'saturation' attribute
+	// TODO: handle 'color' attribute
+	// TODO: handle 'colorTemperature' attribute
+	// TODO: handle 'consumableStatus' attribute
+	// TODO: handle 'contact' attribute
+	// TODO: handle 'door' attribute
+	// TODO: handle 'energy' attribute
+	// TODO: handle 'eta' attribute
+	// TODO: handle 'door' attribute
+	// TODO: handle 'checkInterval' attribute
+	// TODO: handle 'image' attribute
+	// TODO: handle 'indicatorStatus' attribute
+	// TODO: handle 'infraredLevel' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'codeReport' attribute
+	// TODO: handle 'codeChanged' attribute
+	// TODO: handle 'lock' attribute
+	// TODO: handle 'activities' attribute
+	// TODO: handle 'currentActivity' attribute
+	// TODO: handle 'motion' attribute
+	// TODO: handle 'status' attribute
+	// TODO: handle 'level' attribute
+	// TODO: handle 'trackDescription' attribute
+	// TODO: handle 'trackData' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'pH' attribute
+	// TODO: handle 'powerSource' attribute
+	// TODO: handle 'power' attribute
+	// TODO: handle 'powerSource' attribute
+	// TODO: handle 'presence' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'volume' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'pictureMode' attribute
+	// TODO: handle 'soundMode' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'messageButton' attribute
+	// TODO: handle 'shock' attribute
+	// TODO: handle 'lqi' attribute
+	// TODO: handle 'rssi' attribute
+	// TODO: handle 'sleeping' attribute
+	// TODO: handle 'smoke' attribute
+	// TODO: handle 'carbonMonoxide' attribute
+	// TODO: handle 'sound' attribute
+	// TODO: handle 'phraseSpoken' attribute
+	// TODO: handle 'switch' attribute
+	// TODO: handle 'level' attribute
+	// TODO: handle 'tamper' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'temperature' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'schedule' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'coolingSetpoint' attribute
+	// TODO: handle 'coolingSetpointMin' attribute
+	// TODO: handle 'coolingSetpointMax' attribute
+	// TODO: handle 'thermostatFanMode' attribute
+	// TODO: handle 'heatingSetpoint' attribute
+	// TODO: handle 'heatingSetpointMin' attribute
+	// TODO: handle 'heatingSetpointMax' attribute
+	// TODO: handle 'thermostatMode' attribute
+	// TODO: handle 'thermostatOperatingState' attribute
+	// TODO: handle 'thermostatSetpoint' attribute
+	// TODO: handle 'thermostatSetpointMin' attribute
+	// TODO: handle 'thermostatSetpointMax' attribute
+	// TODO: handle 'threeAxis' attribute
+	// TODO: handle 'sessionStatus' attribute
+	// TODO: handle 'timeRemaining' attribute
+	// TODO: handle 'touch' attribute
+	// TODO: handle 'ultravioletIndex' attribute
+	// TODO: handle 'contact' attribute
+	// TODO: handle 'valve' attribute
+	// TODO: handle 'camera' attribute
+	// TODO: handle 'statusMessage' attribute
+	// TODO: handle 'mute' attribute
+	// TODO: handle 'settings' attribute
+	// TODO: handle 'clip' attribute
+	// TODO: handle 'stream' attribute
+	// TODO: handle 'voltage' attribute
+	// TODO: handle 'water' attribute
+	// TODO: handle 'windowShade' attribute
+	// TODO: handle 'epEvent' attribute
+	// TODO: handle 'epInfo' attribute
+
+}
+
+// handle commands
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def strobe() {
+	log.debug "Executing 'strobe'"
+	// TODO: handle 'strobe' command
+}
+
+def siren() {
+	log.debug "Executing 'siren'"
+	// TODO: handle 'siren' command
+}
+
+def both() {
+	log.debug "Executing 'both'"
+	// TODO: handle 'both' command
+}
+
+def sendEvent(alarmSystemStatus,off)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,off)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,off)' command
+}
+
+def sendEvent(alarmSystemStatus,stay)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,stay)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,stay)' command
+}
+
+def sendEvent(alarmSystemStatus,away)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,away)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,away)' command
+}
+
+def sendEvent(alarmSystemStatus,stay)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,stay)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,stay)' command
+}
+
+def sendEvent(alarmSystemStatus,away)() {
+	log.debug "Executing 'sendEvent(alarmSystemStatus,away)'"
+	// TODO: handle 'sendEvent(alarmSystemStatus,away)' command
+}
+
+def sendEvent(sunrise)() {
+	log.debug "Executing 'sendEvent(sunrise)'"
+	// TODO: handle 'sendEvent(sunrise)' command
+}
+
+def sendEvent(sunset)() {
+	log.debug "Executing 'sendEvent(sunset)'"
+	// TODO: handle 'sendEvent(sunset)' command
+}
+
+def sendEvent(sunriseTime)() {
+	log.debug "Executing 'sendEvent(sunriseTime)'"
+	// TODO: handle 'sendEvent(sunriseTime)' command
+}
+
+def sendEvent(sunsetTime)() {
+	log.debug "Executing 'sendEvent(sunsetTime)'"
+	// TODO: handle 'sendEvent(sunsetTime)' command
+}
+
+def playText() {
+	log.debug "Executing 'playText'"
+	// TODO: handle 'playText' command
+}
+
+def playTextAndResume() {
+	log.debug "Executing 'playTextAndResume'"
+	// TODO: handle 'playTextAndResume' command
+}
+
+def playTextAndRestore() {
+	log.debug "Executing 'playTextAndRestore'"
+	// TODO: handle 'playTextAndRestore' command
+}
+
+def playTrack() {
+	log.debug "Executing 'playTrack'"
+	// TODO: handle 'playTrack' command
+}
+
+def playTrackAndResume() {
+	log.debug "Executing 'playTrackAndResume'"
+	// TODO: handle 'playTrackAndResume' command
+}
+
+def playTrackAndRestore() {
+	log.debug "Executing 'playTrackAndRestore'"
+	// TODO: handle 'playTrackAndRestore' command
+}
+
+def capture() {
+	log.debug "Executing 'capture'"
+	// TODO: handle 'capture' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def setHue() {
+	log.debug "Executing 'setHue'"
+	// TODO: handle 'setHue' command
+}
+
+def setSaturation() {
+	log.debug "Executing 'setSaturation'"
+	// TODO: handle 'setSaturation' command
+}
+
+def setColor() {
+	log.debug "Executing 'setColor'"
+	// TODO: handle 'setColor' command
+}
+
+def setColorTemperature() {
+	log.debug "Executing 'setColorTemperature'"
+	// TODO: handle 'setColorTemperature' command
+}
+
+def configure() {
+	log.debug "Executing 'configure'"
+	// TODO: handle 'configure' command
+}
+
+def setConsumableStatus() {
+	log.debug "Executing 'setConsumableStatus'"
+	// TODO: handle 'setConsumableStatus' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def ping() {
+	log.debug "Executing 'ping'"
+	// TODO: handle 'ping' command
+}
+
+def take() {
+	log.debug "Executing 'take'"
+	// TODO: handle 'take' command
+}
+
+def indicatorWhenOn() {
+	log.debug "Executing 'indicatorWhenOn'"
+	// TODO: handle 'indicatorWhenOn' command
+}
+
+def indicatorWhenOff() {
+	log.debug "Executing 'indicatorWhenOff'"
+	// TODO: handle 'indicatorWhenOff' command
+}
+
+def indicatorNever() {
+	log.debug "Executing 'indicatorNever'"
+	// TODO: handle 'indicatorNever' command
+}
+
+def setInfraredLevel() {
+	log.debug "Executing 'setInfraredLevel'"
+	// TODO: handle 'setInfraredLevel' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def unlock() {
+	log.debug "Executing 'unlock'"
+	// TODO: handle 'unlock' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def unlock() {
+	log.debug "Executing 'unlock'"
+	// TODO: handle 'unlock' command
+}
+
+def updateCodes() {
+	log.debug "Executing 'updateCodes'"
+	// TODO: handle 'updateCodes' command
+}
+
+def setCode() {
+	log.debug "Executing 'setCode'"
+	// TODO: handle 'setCode' command
+}
+
+def deleteCode() {
+	log.debug "Executing 'deleteCode'"
+	// TODO: handle 'deleteCode' command
+}
+
+def requestCode() {
+	log.debug "Executing 'requestCode'"
+	// TODO: handle 'requestCode' command
+}
+
+def reloadAllCodes() {
+	log.debug "Executing 'reloadAllCodes'"
+	// TODO: handle 'reloadAllCodes' command
+}
+
+def lock() {
+	log.debug "Executing 'lock'"
+	// TODO: handle 'lock' command
+}
+
+def startActivity() {
+	log.debug "Executing 'startActivity'"
+	// TODO: handle 'startActivity' command
+}
+
+def getAllActivities() {
+	log.debug "Executing 'getAllActivities'"
+	// TODO: handle 'getAllActivities' command
+}
+
+def getCurrentActivity() {
+	log.debug "Executing 'getCurrentActivity'"
+	// TODO: handle 'getCurrentActivity' command
+}
+
+def push() {
+	log.debug "Executing 'push'"
+	// TODO: handle 'push' command
+}
+
+def play() {
+	log.debug "Executing 'play'"
+	// TODO: handle 'play' command
+}
+
+def pause() {
+	log.debug "Executing 'pause'"
+	// TODO: handle 'pause' command
+}
+
+def stop() {
+	log.debug "Executing 'stop'"
+	// TODO: handle 'stop' command
+}
+
+def nextTrack() {
+	log.debug "Executing 'nextTrack'"
+	// TODO: handle 'nextTrack' command
+}
+
+def playTrack() {
+	log.debug "Executing 'playTrack'"
+	// TODO: handle 'playTrack' command
+}
+
+def setLevel() {
+	log.debug "Executing 'setLevel'"
+	// TODO: handle 'setLevel' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def previousTrack() {
+	log.debug "Executing 'previousTrack'"
+	// TODO: handle 'previousTrack' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setTrack() {
+	log.debug "Executing 'setTrack'"
+	// TODO: handle 'setTrack' command
+}
+
+def resumeTrack() {
+	log.debug "Executing 'resumeTrack'"
+	// TODO: handle 'resumeTrack' command
+}
+
+def restoreTrack() {
+	log.debug "Executing 'restoreTrack'"
+	// TODO: handle 'restoreTrack' command
+}
+
+def postOcfCommand() {
+	log.debug "Executing 'postOcfCommand'"
+	// TODO: handle 'postOcfCommand' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	// TODO: handle 'poll' command
+}
+
+def refresh() {
+	log.debug "Executing 'refresh'"
+	// TODO: handle 'refresh' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def volumeUp() {
+	log.debug "Executing 'volumeUp'"
+	// TODO: handle 'volumeUp' command
+}
+
+def volumeDown() {
+	log.debug "Executing 'volumeDown'"
+	// TODO: handle 'volumeDown' command
+}
+
+def setVolume() {
+	log.debug "Executing 'setVolume'"
+	// TODO: handle 'setVolume' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def setPictureMode() {
+	log.debug "Executing 'setPictureMode'"
+	// TODO: handle 'setPictureMode' command
+}
+
+def setSoundMode() {
+	log.debug "Executing 'setSoundMode'"
+	// TODO: handle 'setSoundMode' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def showMessage() {
+	log.debug "Executing 'showMessage'"
+	// TODO: handle 'showMessage' command
+}
+
+def speak() {
+	log.debug "Executing 'speak'"
+	// TODO: handle 'speak' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def setLevel() {
+	log.debug "Executing 'setLevel'"
+	// TODO: handle 'setLevel' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setSchedule() {
+	log.debug "Executing 'setSchedule'"
+	// TODO: handle 'setSchedule' command
+}
+
+def setCoolingSetpoint() {
+	log.debug "Executing 'setCoolingSetpoint'"
+	// TODO: handle 'setCoolingSetpoint' command
+}
+
+def fanOn() {
+	log.debug "Executing 'fanOn'"
+	// TODO: handle 'fanOn' command
+}
+
+def fanAuto() {
+	log.debug "Executing 'fanAuto'"
+	// TODO: handle 'fanAuto' command
+}
+
+def fanCirculate() {
+	log.debug "Executing 'fanCirculate'"
+	// TODO: handle 'fanCirculate' command
+}
+
+def setThermostatFanMode() {
+	log.debug "Executing 'setThermostatFanMode'"
+	// TODO: handle 'setThermostatFanMode' command
+}
+
+def setHeatingSetpoint() {
+	log.debug "Executing 'setHeatingSetpoint'"
+	// TODO: handle 'setHeatingSetpoint' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def heat() {
+	log.debug "Executing 'heat'"
+	// TODO: handle 'heat' command
+}
+
+def emergencyHeat() {
+	log.debug "Executing 'emergencyHeat'"
+	// TODO: handle 'emergencyHeat' command
+}
+
+def cool() {
+	log.debug "Executing 'cool'"
+	// TODO: handle 'cool' command
+}
+
+def auto() {
+	log.debug "Executing 'auto'"
+	// TODO: handle 'auto' command
+}
+
+def setThermostatMode() {
+	log.debug "Executing 'setThermostatMode'"
+	// TODO: handle 'setThermostatMode' command
+}
+
+def setTimeRemaining() {
+	log.debug "Executing 'setTimeRemaining'"
+	// TODO: handle 'setTimeRemaining' command
+}
+
+def start() {
+	log.debug "Executing 'start'"
+	// TODO: handle 'start' command
+}
+
+def stop() {
+	log.debug "Executing 'stop'"
+	// TODO: handle 'stop' command
+}
+
+def pause() {
+	log.debug "Executing 'pause'"
+	// TODO: handle 'pause' command
+}
+
+def cancel() {
+	log.debug "Executing 'cancel'"
+	// TODO: handle 'cancel' command
+}
+
+def beep() {
+	log.debug "Executing 'beep'"
+	// TODO: handle 'beep' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+def mute() {
+	log.debug "Executing 'mute'"
+	// TODO: handle 'mute' command
+}
+
+def unmute() {
+	log.debug "Executing 'unmute'"
+	// TODO: handle 'unmute' command
+}
+
+def flip() {
+	log.debug "Executing 'flip'"
+	// TODO: handle 'flip' command
+}
+
+def capture() {
+	log.debug "Executing 'capture'"
+	// TODO: handle 'capture' command
+}
+
+def open() {
+	log.debug "Executing 'open'"
+	// TODO: handle 'open' command
+}
+
+def close() {
+	log.debug "Executing 'close'"
+	// TODO: handle 'close' command
+}
+
+def presetPosition() {
+	log.debug "Executing 'presetPosition'"
+	// TODO: handle 'presetPosition' command
+}
+
+def enableEpEvents() {
+	log.debug "Executing 'enableEpEvents'"
+	// TODO: handle 'enableEpEvents' command
+}
+
+def epCmd() {
+	log.debug "Executing 'epCmd'"
+	// TODO: handle 'epCmd' command
+}

devicetypes/smartthings/arrival-sensor-ha.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/arrival-sensor-ha.src/README.md

@@ -0,0 +1,50 @@
+# Arrival Sensor HA (2016+ Model)
+
+Cloud Execution
+
+Works with:
+
+* [Samsung SmartThings Arrival Sensor](https://support.smartthings.com/hc/en-us/articles/212417083-Samsung-SmartThings-Arrival-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Sends broadcast of battery level every 20 seconds.
+Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,3 +1,5 @@
+import groovy.json.JsonOutput
+
 /**
  *  Copyright 2017 SmartThings
  *
@@ -19,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
+        capability "Health Check"
 
         fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
                         manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
@@ -58,6 +61,11 @@ def updated() {
     startTimer()
 }
 
+def installed() {
+    // Arrival sensors only goes OFFLINE when Hub is off
+    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def configure() {
     def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"

devicetypes/smartthings/arrival-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/arrival-sensor.src/README.md

@@ -0,0 +1,49 @@
+# Arrival Sensor (2015 Model)
+
+Cloud Execution
+
+Works with:
+
+* [Arrival Sensor](https://www.smartthings.com/products/samsung-smartthings-arrival-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Signal Strength** - device can read the strength of signal- lqi: Link Quality Indication, rssi: Received Signal Strength Indication
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -1,3 +1,5 @@
+import groovy.json.JsonOutput
+
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +21,7 @@ metadata {
 		capability "Presence Sensor"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint profileId: "FC01", deviceId: "019A"
 		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
@@ -111,6 +114,11 @@ def beep() {
 	]
 }
 
+def installed() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def parse(String description) {
 	def results
 	if (isBatteryMessage(description)) {

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -31,6 +31,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -16,7 +16,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch"
 		capability "Polling"
 		capability "Power Meter"

smartapps/smartthings/wattvision-manager.src/wattvision-manager.groovy

@@ -136,10 +136,20 @@ def getDataForChild(child, startDate, endDate) {
 
 	def wattvisionURL = wattvisionURL(child.deviceNetworkId, startDate, endDate)
 	if (wattvisionURL) {
-		httpGet(uri: wattvisionURL) { response ->
-			def json = new org.json.JSONObject(response.data.toString())
-			child.addWattvisionData(json)
-			return "success"
+		try {
+			httpGet(uri: wattvisionURL) { response ->
+				def json = new org.json.JSONObject(response.data.toString())
+				child.addWattvisionData(json)
+				return "success"
+			}
+		} catch (groovyx.net.http.HttpResponseException httpE) {
+			log.error "Wattvision getDataForChild HttpResponseException: ${httpE} -> ${httpE.response.data}"
+			//log.debug "wattvisionURL = ${wattvisionURL}"
+			return "fail"
+		} catch (e) {
+			log.error "Wattvision getDataForChild General Exception: ${e}"
+			//log.debug "wattvisionURL = ${wattvisionURL}"
+			return "fail"
 		}
 	}
 }
@@ -164,9 +174,14 @@ def wattvisionURL(senorId, startDate, endDate) {
 	if (diff > 259200000) { // 3 days in milliseconds
 		// Wattvision only allows pulling 3 hours of data at a time
 		startDate = new Date(hours: endDate.hours - 3)
+	} else if (diff < 10000) { // 10 seconds in milliseconds
+		// Wattvision throws errors when the difference between start_time and end_time is 5 seconds or less
+		// So we are going to make sure that we have a few more seconds of breathing room
+		use (groovy.time.TimeCategory) {
+			startDate = endDate - 10.seconds
+		}
 	}
 
-
 	def params = [
 		"sensor_id" : senorId,
 		"api_id"    : wattvisionApiAccess.id,
@@ -480,4 +495,3 @@ def connectionSuccessful(deviceName, iconSrc) {
 
 	render contentType: 'text/html', data: html
 }
-