MSA-1965: This fixes the bug where the buttons are not recognized after 2017 April's SmartThings platform update

PROB-1347 Lux values showing as ${unit} in recently tab of Aeon Multipurpose

devicetypes/drzwave/ezmultipli.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/drzwave/ezmultipli.src/README.md

@@ -0,0 +1,44 @@
+# Express Controls EZMultiPli
+
+Works with: 
+
+* [Express Controls EZMultiPli](https://www.smartthings.com/works-with-smartthings/)
+
+## Table of contents
+
+* [Release Notes](#release-notes)
+* [Capabilities](#capabilities)
+* [Troubleshooting](#troubleshooting)
+
+## Release Notes
+
+* **2017-04-19** - _dkirker_ - Update default config values in config value range check functions, use lux if lum option is null, fix NullPointerException on initial pairing when color data has not been set (and set the default color data!)
+* **2017-04-10** - _DrZwave_ (with help from Donald Kirker) - changed fingerprint to the new format, lowered the OnTime and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+* **2016-10-06** - _erocm1231_ - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+* **2016-01-28** - _erocm1231_ - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers. Also, added configurationGet and a configurationReport method so that config values can be verified.
+* **2015-12-04** - _erocm1231_ - added range value to preferences as suggested by @Dela-Rick.
+* **2015-11-26** - _erocm1231_ - Fixed null condition error when adding as a new device. 
+* **2015-11-24** - _erocm1231_ - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed the device not having its on/off status updated when colors are changed.
+* **2015-11-23** - _erocm1231_ - Changed the look to match SmartThings v2 devices. 
+* **2015-11-21** - _erocm1231_ - Made code much more efficient. Also made it compatible when setColor is passed a hex value. Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, Daylight - Energize - Teal, Warm White - Relax - Yellow
+* **2015-11-19** - _erocm1231_ - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+* **2015-11-18** - _erocm1231_ - Added to setColor for compatibility with Smart Lighting
+* **v0.1.0** - _DrZWave_ - chose better icons, Got color LED to work - first fully functional version
+* **v0.0.9** - _jrs_ - got the temp and luminance to work. Motion works. Debugging the color wheel.
+* **v0.0.8** - _DrZWave_ 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+* **v0.0.7** - _jrs_ - 02/23/2015 - Jim Sulin
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Sensor** - detects sensor events
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Switch** - can detect state (possible values: on/off)
+* **Color Control** - represents that the color attributes of a device can be controlled (hue, saturation, color value
+* **Configuration** - configure() command called when device is installed or device preferences updated
+* **Refresh** - refresh() command for status updates
+
+## Troubleshooting
+

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -2,27 +2,6 @@
 // Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
 // driver for SmartThings
 // The EZMultiPli is also known as the HSM200 from HomeSeer.com
-//
-// 2017-04-10 - DrZwave (with help from Don Kirker) - changed fingerprint to the new format, lowered the OnTime 
-//              and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
-// 2016-10-06 - erocm1231 - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being
-//              reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
-// 2016-01-28 - erocm1231 - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers.
-//              Also, added configurationGet and a configurationReport method so that config values can be verified.
-// 2015-12-04 - erocm1231 - added range value to preferences as suggested by @Dela-Rick.
-// 2015-11-26 - erocm1231 - Fixed null condition error when adding as a new device. 
-// 2015-11-24 - erocm1231 - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed 
-//              the device not having its on/off status updated when colors are changed.
-// 2015-11-23 - erocm1231 - Changed the look to match SmartThings v2 devices. 
-// 2015-11-21 - erocm1231 - Made code much more efficient. Also made it compatible when setColor is passed a hex value.
-//              Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, 
-//              Daylight - Energize - Teal, Warm White - Relax - Yellow
-// 2015-11-19 - erocm1231 - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
-// 2015-11-18 - erocm1231 - Added to setColor for compatibility with Smart Lighting
-// v0.1.0 - DrZWave - chose better icons, Got color LED to work - first fully functional version
-// v0.0.9 - jrs - got the temp and luminance to work. Motion works. Debugging the color wheel.
-// v0.0.8 - DrZWave 2/25/2015 - change the color control to be tiles since there are only 8 colors.
-// v0.0.7 - jrs - 02/23/2015 - Jim Sulin
 
 metadata {
 	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
@@ -131,7 +110,6 @@ metadata {
 
 } // end metadata
 
-
 // Parse incoming device messages from device to generate events
 def parse(String description){
 	//log.debug "==> New Zwave Event: ${description}"
@@ -145,7 +123,7 @@ def parse(String description){
     
     def statusTextmsg = ""
     if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
-		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == "" || lum == null || lum == 1) ? "%" : "LUX"}"
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == 1) ? "%" : "LUX"}"
     	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
 	}
     if (result != [null] && result != []) log.debug "Parse returned ${result}"
@@ -168,7 +146,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
 			break;
 		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
 			map.value = cmd.scaledSensorValue.toInteger().toString()
-            if(lum == "" || lum == null || lum == 1) map.unit = "%"
+            if(lum == 1) map.unit = "%"
             else map.unit = "lux"
 			map.name = "illuminance"
 			log.debug "Luminance report"
@@ -203,7 +181,8 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-    if (cmd.value == 0 && device.latestState("color").value != "#ffffff") {
+    // The EZMultiPli sets the color back to #ffffff on "off" or at init, so update the ST device to reflect this.
+    if (device.latestState("color") == null || (cmd.value == 0 && device.latestState("color").value != "#ffffff")) {
         sendEvent(name: "color", value: "#ffffff", displayed: true)
     }
     [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
@@ -296,12 +275,12 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 // ensure we are passing acceptable param values for LiteMin & TempMin configs
 def checkLiteTempInput(value) {
 	if (value == null) {
-    	value=60
+    	value=6
     }
     def liteTempVal = value.toInteger()
     switch (liteTempVal) {
       case { it < 0 }:
-        return 60			// bad value, set to default
+        return 6			// bad value, set to default
         break
       case { it > 127 }:
         return 127			// bad value, greater then MAX, set to MAX
@@ -314,12 +293,12 @@ def checkLiteTempInput(value) {
 // ensure we are passing acceptable param value for OnTime config
 def checkOnTimeInput(value) {
 	if (value == null) {
-    	value=10
+    	value=2
     }
     def onTimeVal = value.toInteger()
     switch (onTimeVal) {
       case { it < 0 }:
-        return 10			// bad value set to default
+        return 2			// bad value set to default
         break
       case { it > 127 }:
         return 127			// bad value, greater then MAX, set to MAX

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -103,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} lux', unit:""
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -410,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -282,5 +282,4 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
-
+}

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -193,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/arrival-sensor-ha.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/arrival-sensor-ha.src/README.md

@@ -0,0 +1,50 @@
+# Arrival Sensor HA (2016+ Model)
+
+Cloud Execution
+
+Works with:
+
+* [Samsung SmartThings Arrival Sensor](https://support.smartthings.com/hc/en-us/articles/212417083-Samsung-SmartThings-Arrival-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Sends broadcast of battery level every 20 seconds.
+Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,3 +1,5 @@
+import groovy.json.JsonOutput
+
 /**
  *  Copyright 2017 SmartThings
  *
@@ -19,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
+        capability "Health Check"
 
         fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
                         manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
@@ -58,6 +61,11 @@ def updated() {
     startTimer()
 }
 
+def installed() {
+    // Arrival sensors only goes OFFLINE when Hub is off
+    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def configure() {
     def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"

devicetypes/smartthings/arrival-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/arrival-sensor.src/README.md

@@ -0,0 +1,49 @@
+# Arrival Sensor (2015 Model)
+
+Cloud Execution
+
+Works with:
+
+* [Arrival Sensor](https://www.smartthings.com/products/samsung-smartthings-arrival-sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery)
+* [Troubleshooting](#troubleshooting)
+
+
+## Capabilities
+
+* **Tone** - beep command to allow an audible tone
+* **Actuator** - device has commands
+* **Signal Strength** - device can read the strength of signal- lqi: Link Quality Indication, rssi: Received Signal Strength Indication
+* **Presence Sensor** - device tells presence with enum - {present, not present}
+* **Sensor** - device has attributes
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Arrival Sensor ZigBee is an untracked device. Disconnects when Hub goes OFFLINE.
+
+
+## Battery
+
+Uses 1 CR2032 Battery
+
+* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
+
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+
+* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
+
+If the arrival sensor doesn't update its status, here are a few things you can try to debug.
+
+* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -1,3 +1,5 @@
+import groovy.json.JsonOutput
+
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,6 +21,7 @@ metadata {
 		capability "Presence Sensor"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint profileId: "FC01", deviceId: "019A"
 		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
@@ -111,6 +114,11 @@ def beep() {
 	]
 }
 
+def installed() {
+	// Arrival sensors only goes OFFLINE when Hub is off
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
+}
+
 def parse(String description) {
 	def results
 	if (isBatteryMessage(description)) {

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -33,7 +33,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -31,6 +31,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
 		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3323-G", deviceJoinName: "Centralite Micro Door Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,6 +64,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -84,11 +85,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -123,7 +124,12 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+	zigbee.onOffConfig(0, 300) +
+	zigbee.levelConfig()
 }
 
 def configure() {
@@ -133,26 +139,38 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	refresh()
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -161,4 +179,4 @@ def installed() {
 			sendEvent(name: "level", value: 100)
 		}
 	}
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -78,6 +78,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -102,11 +103,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
@@ -141,7 +142,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -156,7 +163,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -180,19 +192,31 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -201,4 +225,4 @@ def installed() {
             sendEvent(name: "level", value: 100)
         }
     }
-}
+}

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -71,6 +71,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -123,7 +128,11 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -138,7 +147,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+	value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -55,6 +55,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -72,11 +73,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -108,28 +109,46 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() +
+	zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+	//payload-> sat value, transition time
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -70,6 +70,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -88,11 +89,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
@@ -124,11 +125,16 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -139,17 +145,32 @@ def setLevel(value) {
     zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -66,6 +66,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -95,14 +100,14 @@ def setLevel(value) {
 }
 
 def refresh() {
-	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 
-	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
     }
 
-	cmds
+    cmds
 }
 
 def poll() {
@@ -138,7 +143,7 @@ def configure() {
     log.debug "configure()"
     configureHealthCheck()
     // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def updated() {
@@ -148,7 +153,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -68,6 +68,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -94,7 +99,11 @@ def setLevel(value) {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def poll() {
@@ -129,8 +138,7 @@ def configureHealthCheck() {
 def configure() {
     log.debug "configure()"
     configureHealthCheck()
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-
+    refresh()
 }
 
 def updated() {
@@ -140,7 +148,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -16,7 +16,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Metering Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch"
 		capability "Polling"
 		capability "Power Meter"

devicetypes/stelpro/stelpro-ki-zigbee-thermostat.src/stelpro-ki-zigbee-thermostat.groovy

@@ -0,0 +1,663 @@
+/**
+ *  Copyright 2017 Stelpro
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Stelpro Ki ZigBee Thermostat
+ *
+ *  Author: Stelpro
+ *
+ *  Date: 2017-05-08
+ */
+ 
+preferences {
+	section {
+ 			input("unitformat", "enum", title: "What unit format do you want your thermostat to display temperature?", options: ["Celsius", "Fahrenheit"], defaultValue: "Celsius", required: false, displayDuringSetup: false)
+            input("lock", "enum", title: "Do you want to lock your thermostat's physical keypad?", options: ["No", "Yes"], defaultValue: "No", required: false, displayDuringSetup: false)
+            input("heatdetails", "enum", title: "Do you want a detailed operating state notification?", options: ["No", "Yes"], defaultValue: "No", required: false, displayDuringSetup: true)
+    		input("zipcode", "text", title: "ZipCode (Outdoor Temperature)", description: "[Do not use space](Blank = No Forecast)")
+    }
+}
+
+metadata {
+	definition (name: "Stelpro Ki ZigBee Thermostat", namespace: "Stelpro", author: "Stelpro") {
+        capability "Thermostat"
+        capability "Temperature Measurement"
+        capability "Actuator"
+        capability "Polling"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Configuration"
+        
+		command "switchMode"
+        command "quickSetHeat"
+        command "quickSetOutTemp"
+        command "increaseHeatSetpoint"
+        command "decreaseHeatSetpoint"
+        command "parameterSetting"
+
+		fingerprint profileId: "0104", endpointId: "19", inClusters: " 0000,0003,0201,0204", outClusters: "0402"
+	}
+
+	// simulator metadata
+	simulator { }
+
+	tiles {
+		multiAttributeTile(name:"thermostatMulti", type:"thermostat", width:6, height:4) {
+			tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temp", label:'${currentValue}')
+                attributeState("high", label:'HIGH')
+            	attributeState("low", label:'LOW')
+            	attributeState("--", label:'--')
+			}
+            tileAttribute("device.heatingSetpoint", key: "VALUE_CONTROL") {
+				attributeState("VALUE_UP", action: "increaseHeatSetpoint")
+                attributeState("VALUE_DOWN", action: "decreaseHeatSetpoint")
+			}
+			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
+				attributeState("idle", backgroundColor:"#44b621")
+				attributeState("heating", backgroundColor:"#ffa81e")
+			}
+			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {
+				attributeState("off", label:'Off')
+				attributeState("comfort", label:'Comfort')
+				attributeState("eco", label:'Eco')
+			}
+            tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT")
+            {
+            	attributeState("heatingSetpoint", label:'${currentValue}')
+            }
+		}
+        standardTile("mode", "device.thermostatMode", width: 2, height: 2) {
+        	state "off", label:'Off', action:"switchMode", nextState:"comfort", icon:"st.thermostat.off"
+			state "comfort", label:'Comfort', action:"switchMode", nextState:"eco", icon:"http://cdn.device-icons.smartthings.com/Home/home29-icn@2x.png"
+			state "eco", label:'Eco', action:"switchMode", nextState:"off", icon:"http://cdn.device-icons.smartthings.com/Outdoor/outdoor3-icn@2x.png"
+        }
+        valueTile("heatingSetpoint", "device.heatingSetpoint", width: 2, height: 2) {
+            state "temperature", label:'Setpoint\n${currentValue}°', backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+            ]
+            state "--", label:'--', backgroundColor:"#bdbdbd"
+        }
+        standardTile("refresh", "device.refresh", decoration: "flat", width: 2, height: 2) {
+            state "default", action:"poll", icon:"st.secondary.refresh"
+        }
+        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+        main ("thermostatMulti")
+        details(["thermostatMulti", "mode", "heatingSetpoint", "refresh", "configure"])
+    }
+}
+
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parse description $description"
+	def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		if (descMap.cluster == "0201" && descMap.attrId == "0000")
+        {
+			log.debug "TEMP"
+			map.name = "temperature"
+			map.value = getTemperature(descMap.value)
+            if (descMap.value == "7ffd")		//0x7FFD
+            {
+                map.value = "low"
+            }
+            else if (descMap.value == "7fff")	//0x7FFF
+            {
+                map.value = "high"
+            }
+            else if (descMap.value == "8000")	//0x8000
+            {
+                map.value = "--"
+            }
+            sendEvent(name:"temperature", value:map.value)
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "0012")
+        {
+			log.debug "HEATING SETPOINT"
+			map.name = "heatingSetpoint"
+			map.value = getTemperature(descMap.value)
+            if (descMap.value == "8000")		//0x8000
+            {
+                map.value = "--"
+            }
+            sendEvent(name:"heatingSetpoint", value:map.value)
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "001c")
+        {
+        	if (descMap.value.size() == 8)
+            {
+				log.debug "MODE"
+				map.name = "thermostatMode"
+				map.value = getModeMap()[descMap.value]
+				sendEvent(name:"thermostatMode", value:map.value)
+            }
+            else if (descMap.value.size() == 10)
+            {
+            	log.debug "MODE & SETPOINT MODE"
+                def twoModesAttributes = descMap.value[0..-9]
+                map.name = "thermostatMode"
+				map.value = getModeMap()[twoModesAttributes]
+				sendEvent(name:"thermostatMode", value:map.value)
+            }
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "401c")
+        {
+            log.debug "SETPOINT MODE"
+            log.debug "descMap.value $descMap.value"
+            map.name = "thermostatMode"
+            map.value = getModeMap()[descMap.value]
+            sendEvent(name:"thermostatMode", value:map.value)
+		}
+        else if (descMap.cluster == "0201" && descMap.attrId == "0008")
+        {
+        	log.debug "HEAT DEMAND"
+            map.name = "thermostatOperatingState"
+            map.value = getModeMap()[descMap.value]
+            if (map.value == "off")
+            {
+            	map.value = "idle"
+            }
+            else
+            {
+            	map.value = "heating"
+            }
+            sendEvent(name:"thermostatOperatingState", value:map.value)
+            if (settings.heatdetails == "No")
+            {
+    			map.displayed = false
+    		}
+        }
+	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+def getModeMap() { [
+	"00":"off",
+    "04":"comfort",
+	"05":"eco"
+]}
+
+def getFanModeMap() { [
+	"04":"fanOn",
+	"05":"fanAuto"
+]}
+
+def poll() {
+    def weather
+    // If there is a zipcode defined, weather forecast will be sent. Otherwise, no weather forecast.
+    if (settings.zipcode) {
+        log.debug "ZipCode: ${settings.zipcode}"
+        weather = getWeatherFeature( "conditions", settings.zipcode )
+
+        // Check if the variable is populated, otherwise return.
+        if (!weather) {
+            log.debug( "Something went wrong, no data found." )
+            return false
+        }
+
+        // Set the tiles
+        def locationScale = getTemperatureScale()
+        def tempToSend
+        log.debug( "Outdoor Temperature: ${weather.current_observation.temp_c}ºC" )
+        sendEvent( name: 'outsideTemp', value: weather.current_observation.temp_c )
+        tempToSend = weather.current_observation.temp_c
+
+		delayBetween([
+                quickSetOutTemp(tempToSend),
+                zigbee.readAttribute(0x201, 0x0000),	//Read Local Temperature
+                zigbee.readAttribute(0x201, 0x0008),	//Read PI Heating State
+    			zigbee.readAttribute(0x201, 0x0012),	//Read Heat Setpoint
+                zigbee.readAttribute(0x201, 0x001C),	//Read System Mode
+                my_readAttribute(0x201, 0x401C, ["mfgCode": "0x1185"]),	//Read Manufacturer Specific Setpoint Mode
+                zigbee.readAttribute(0x204, 0x0000),	//Read Temperature Display Mode
+                zigbee.readAttribute(0x204, 0x0001),	//Read Keypad Lockout
+                sendEvent( name: 'change', value: 0 )
+        ], 200)
+    } else {
+        delayBetween([
+        		zigbee.readAttribute(0x201, 0x0000),	//Read Local Temperature
+                zigbee.readAttribute(0x201, 0x0008),	//Read PI Heating State
+    			zigbee.readAttribute(0x201, 0x0012),	//Read Heat Setpoint
+                zigbee.readAttribute(0x201, 0x001C),	//Read System Mode
+                my_readAttribute(0x201, 0x401C, ["mfgCode": "0x1185"]),	//Read Manufacturer Specific Setpoint Mode
+                zigbee.readAttribute(0x204, 0x0000),	//Read Temperature Display Mode
+                zigbee.readAttribute(0x204, 0x0001),	//Read Keypad Lockout
+                sendEvent( name: 'change', value: 0 )
+        ], 200)
+    }
+}
+
+def getTemperature(value) {
+	if (value != null) {
+    	log.debug("value $value")
+		def celsius = Integer.parseInt(value, 16) / 100
+		if (getTemperatureScale() == "C") {
+			return celsius
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))
+		}
+	}
+}
+
+def quickSetHeat(degrees) {
+    sendEvent( name: 'change', value: 1 )
+    setHeatingSetpoint(degrees)
+}
+
+def setHeatingSetpoint(degrees) {
+	if (degrees != null) {
+		def temperatureScale = getTemperatureScale()
+		def degreesInteger = Math.round(degrees)
+        float tempfloat;
+	    tempfloat = (Math.round(degrees.toFloat() * 2)) / 2
+
+		log.debug "setHeatingSetpoint({$tempfloat} ${temperatureScale})"
+		sendEvent("name": "heatingSetpoint", "value": tempfloat)
+        def celsius = (getTemperatureScale() == "C") ? tempfloat : (fahrenheitToCelsius(tempfloat) as Float).round(2)
+        delayBetween([
+        	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x12 0x29 {" + hex(celsius * 100) + "}",
+        	zigbee.readAttribute(0x201, 0x12),	//Read Heat Setpoint
+    	], 100)
+	}
+}
+
+def setCoolingSetpoint(degrees) {
+	if (degrees != null) {
+		def degreesInteger = Math.round(degrees)
+		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
+	}
+}
+
+def quickSetOutTemp(degrees) {
+    setOutdoorTemperature(degrees, 0)
+}
+
+def setOutdoorTemperature(degrees, delay = 0) {
+    setOutdoorTemperature(degrees.toDouble(), delay)
+}
+
+def setOutdoorTemperature(Double degrees, Integer delay = 0) {
+    def deviceScale
+    def locationScale = getTemperatureScale()
+    def p = (state.precision == null) ? 1 : state.precision
+    Integer tempToSend
+    def tempToSendInString
+
+    if (locationScale == "C")
+    {
+        deviceScale = 0
+    }
+    else
+    {
+        deviceScale = 1
+    }
+
+    if (degrees < 0)
+    {
+    	tempToSend = -degrees*100 - 65536
+    	tempToSend = -tempToSend
+    }
+    else
+    {
+    	tempToSend = (degrees*100)
+    }
+
+    tempToSendInString = zigbee.convertToHexString(tempToSend, 4)
+    my_writeAttribute(0x201, 0x4001, 0x29, tempToSendInString, ["mfgCode": "0x1185"])
+}
+
+def increaseHeatSetpoint()
+{
+    def currentMode = device.currentState("thermostatMode")?.value
+    if (currentMode != "off")
+    {
+		float currentSetpoint = device.currentValue("heatingSetpoint")
+		def locationScale = getTemperatureScale()
+    	float maxSetpoint
+    	float step
+
+    	if (locationScale == "C")
+    	{
+        	maxSetpoint = 30;
+        	step = 0.5
+    	}
+    	else
+    	{
+        	maxSetpoint = 86
+        	step = 1
+    	}
+
+        if (currentSetpoint < maxSetpoint)
+        {
+            currentSetpoint = currentSetpoint + step
+            quickSetHeat(currentSetpoint)
+        }
+    }
+}
+
+def decreaseHeatSetpoint()
+{
+    def currentMode = device.currentState("thermostatMode")?.value
+    if (currentMode != "off")
+    {
+        float currentSetpoint = device.currentValue("heatingSetpoint")
+        def locationScale = getTemperatureScale()
+        float minSetpoint
+        float step
+
+        if (locationScale == "C")
+        {
+            minSetpoint = 5;
+            step = 0.5
+        }
+        else
+        {
+            minSetpoint = 41
+            step = 1
+        }
+
+    	if (currentSetpoint > minSetpoint)
+    	{
+        	currentSetpoint = currentSetpoint - step
+        	quickSetHeat(currentSetpoint)
+    	}
+    }
+}
+
+def modes() {
+	["comfort", "eco", "off"]
+}
+
+def switchMode() {
+    def currentMode = device.currentState("thermostatMode")?.value
+    def lastTriedMode = state.lastTriedMode ?: currentMode ?: "comfort"
+    def modeOrder = modes()
+    def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
+	def nextMode = next(currentMode)
+    def modeNumber;
+    Integer setpointModeNumber;
+    def modeToSendInString;
+
+    if (nextMode == "comfort")
+    {
+    	modeNumber = 04
+        setpointModeNumber = 04
+    }
+    else if (nextMode == "eco")
+    {
+    	modeNumber = 04
+        setpointModeNumber = 05
+    }
+    else
+    {
+    	modeNumber = 00
+        setpointModeNumber = 00
+    }
+    if (supportedModes?.contains(currentMode)) {
+        while (!supportedModes.contains(nextMode) && nextMode != "comfort") {
+            nextMode = next(nextMode)
+        }
+    }
+    state.lastTriedMode = nextMode
+	modeToSendInString = zigbee.convertToHexString(setpointModeNumber, 2)
+    delayBetween([
+    		"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x001C 0x30 {$modeNumber}",
+            my_writeAttribute(0x201, 0x401C, 0x30, modeToSendInString, ["mfgCode": "0x1185"]),
+            poll()
+    ], 1000)
+}
+
+def setThermostatMode() {
+	log.debug "switching thermostatMode"
+	def currentMode = device.currentState("thermostatMode")?.value
+	def modeOrder = modes()
+	def index = modeOrder.indexOf(currentMode)
+	def next = index >= 0 && index < modeOrder.size() - 1 ? modeOrder[index + 1] : modeOrder[0]
+	log.debug "switching mode from $currentMode to $next"
+	"$next"()
+}
+
+def setThermostatFanMode() {
+	log.debug "Switching fan mode"
+	def currentFanMode = device.currentState("thermostatFanMode")?.value
+	log.debug "switching fan from current mode: $currentFanMode"
+	def returnCommand
+
+	switch (currentFanMode) {
+		case "fanAuto":
+			returnCommand = fanOn()
+			break
+		case "fanOn":
+			returnCommand = fanAuto()
+			break
+	}
+	if(!currentFanMode) { returnCommand = fanAuto() }
+	returnCommand
+}
+
+def setThermostatMode(String value) {
+	log.debug "setThermostatMode({$value})"
+	"$value"()
+}
+
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
+	"$value"()
+}
+
+def off() {
+	log.debug "off"
+	sendEvent("name":"thermostatMode", "value":"off")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {00}"
+}
+
+def cool() {
+	log.debug "cool"
+	sendEvent("name":"thermostatMode", "value":"cool")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {03}"
+}
+
+def heat() {
+	log.debug "heat"
+	sendEvent("name":"thermostatMode", "value":"heat")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {04}"
+}
+
+def emergencyHeat() {
+	log.debug "emergencyHeat"
+	sendEvent("name":"thermostatMode", "value":"emergency heat")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x201 0x1C 0x30 {05}"
+}
+
+def on() {
+	fanOn()
+}
+
+def fanOn() {
+	log.debug "fanOn"
+	sendEvent("name":"thermostatFanMode", "value":"fanOn")
+	"st wattr 0x${device.deviceNetworkId} 0x19 0x202 0 0x30 {04}"
+}
+
+def auto() {
+	fanAuto()
+}
+
+def fanAuto() {
+	log.debug "fanAuto"
+	sendEvent("name":"thermostatFanMode", "value":"fanAuto")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
+}
+
+def configure() {
+	log.debug "binding to Thermostat cluster"
+	delayBetween([
+        "zdo bind 0x${device.deviceNetworkId} 1 0x19 0x201 {${device.zigbeeId}} {}",
+        //Cluster ID (0x0201 = Thermostat Cluster), Attribute ID, Data Type, Payload (Min report, Max report, On change trigger)
+        zigbee.configureReporting(0x0201, 0x0000, 0x29, 10, 60, 50), 	//Attribute ID 0x0000 = local temperature, Data Type: S16BIT
+    	zigbee.configureReporting(0x0201, 0x0012, 0x29, 1, 0, 50),  	//Attribute ID 0x0012 = occupied heat setpoint, Data Type: S16BIT
+        zigbee.configureReporting(0x0201, 0x001C, 0x30, 1, 0, 1),   	//Attribute ID 0x001C = system mode, Data Type: 8 bits enum
+        zigbee.configureReporting(0x0201, 0x401C, 0x30, 1, 0, 1),   	//Attribute ID 0x401C = manufacturer specific setpoint mode, Data Type: 8 bits enum
+        zigbee.configureReporting(0x0201, 0x0008, 0x20, 300, 900, 5),   //Attribute ID 0x0008 = pi heating demand, Data Type: U8BIT
+        
+        //Cluster ID (0x0204 = Thermostat Ui Conf Cluster), Attribute ID, Data Type, Payload (Min report, Max report, On change trigger)
+        zigbee.configureReporting(0x0204, 0x0000, 0x30, 1, 0, 1),   //Attribute ID 0x0000 = temperature display mode, Data Type: 8 bits enum
+    	zigbee.configureReporting(0x0204, 0x0001, 0x30, 1, 0, 1),   //Attribute ID 0x0001 = keypad lockout, Data Type: 8 bits enum
+        
+        //Read the configured variables
+        zigbee.readAttribute(0x201, 0x0000),	//Read Local Temperature
+    	zigbee.readAttribute(0x201, 0x0012),	//Read Heat Setpoint
+        zigbee.readAttribute(0x201, 0x001C),	//Read System Mode
+        my_readAttribute(0x201, 0x401C, ["mfgCode": "0x1185"]),	//Read Manufacturer Specific Setpoint Mode
+        zigbee.readAttribute(0x201, 0x0008),	//Read PI Heating State
+        zigbee.readAttribute(0x204, 0x0000),	//Read Temperature Display Mode
+    	zigbee.readAttribute(0x204, 0x0001),	//Read Keypad Lockout
+	], 200)
+}
+
+def updated() {
+	log.debug "updated called"
+    response(parameterSetting())
+}
+
+def parameterSetting() {
+	def format = null
+    def lockmode = null
+    def valid_format = 0
+    def valid_lock = 0
+
+    log.info "unitformat : $settings.unitformat"
+    if (settings.unitformat == "Celsius") {
+        format = 0x00
+        valid_format = 1
+    }
+    else if (settings.unitformat == "Fahrenheit") {
+        format = 0x01
+        valid_format = 1
+    }
+
+    log.info "lock : $settings.lock"
+    if (settings.lock == "Yes") {
+        lockmode = 0x01
+        valid_lock = 1
+    }
+    else if (settings.lock == "No") {
+        lockmode = 0x00
+        valid_lock = 1
+    }
+    if ((valid_format == 1) && (valid_lock == 1))
+    {
+    	log.info "both valid"
+        delayBetween([
+            zigbee.writeAttribute(0x204, 0x00, 0x30, format),	//Write Unit Format Mode
+            zigbee.writeAttribute(0x204, 0x01, 0x30, lockmode),	//Write Lock Mode
+            poll(),
+        ], 200)
+    }
+    else if (valid_format == 1)
+    {
+    	log.info "format valid"
+        delayBetween([
+            zigbee.writeAttribute(0x204, 0x00, 0x30, format),	//Write Unit Format Mode
+            poll(),
+        ], 200)
+    }
+	else if (valid_lock == 1)
+    {
+    	log.info "lock valid"
+        delayBetween([
+            zigbee.writeAttribute(0x204, 0x01, 0x30, lockmode),	//Write Lock Mode
+            poll(),
+        ], 200)
+    }
+    else
+    {
+    	log.info "nothing valid"
+    }
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private getEndpointId() {
+    new BigInteger(device.endpointId, 16).toString()
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}
+
+def my_readAttribute(cluster, attributeId, Map additional=null)
+{
+    if (additional?.get("mfgCode")) {
+        [ "zcl mfg-code ${additional['mfgCode']}", "delay 200",
+          "zcl global read ${cluster} ${attributeId}", "delay 200",
+          "send 0x${device.deviceNetworkId} 1 ${endpointId}" ] 
+    } else {
+        zigbee.readAttribute(cluster, attributeId)
+    }
+}
+
+def my_writeAttribute(cluster, attributeId, dataType, value, Map additional=null)
+{
+	value = swapEndianHex(value)
+    if (additional ?.get("mfgCode")) {
+        [ "zcl mfg-code ${additional['mfgCode']}", "delay 200",
+          "zcl global write ${cluster} ${attributeId} ${dataType} {${value}}", "delay 200",
+          "send 0x${device.deviceNetworkId} 1 ${endpointId}" ]
+    } else {
+        zigbee.writeAttribute(cluster, attributeId, dataType, value)
+    }
+}
+

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -765,6 +765,7 @@ def turnOffSwitch() {
         } else {
             
             device.off();
+                  
             return [Device_id: params.id, result_action: "200"]
         }
 }
@@ -788,7 +789,6 @@ def getTempSensorsStatus(id) {
             return []
         } else {
         	def bat = getBatteryStatus(device.id)
-            def scale = [Scale: location.temperatureScale]
-        	return [temperature: device.currentValue('temperature')] + bat + scale
+        	return [temperature: device.currentValue('temperature')] + bat
    		}
    }

smartapps/smartthings/wattvision-manager.src/wattvision-manager.groovy

@@ -136,10 +136,20 @@ def getDataForChild(child, startDate, endDate) {
 
 	def wattvisionURL = wattvisionURL(child.deviceNetworkId, startDate, endDate)
 	if (wattvisionURL) {
-		httpGet(uri: wattvisionURL) { response ->
-			def json = new org.json.JSONObject(response.data.toString())
-			child.addWattvisionData(json)
-			return "success"
+		try {
+			httpGet(uri: wattvisionURL) { response ->
+				def json = new org.json.JSONObject(response.data.toString())
+				child.addWattvisionData(json)
+				return "success"
+			}
+		} catch (groovyx.net.http.HttpResponseException httpE) {
+			log.error "Wattvision getDataForChild HttpResponseException: ${httpE} -> ${httpE.response.data}"
+			//log.debug "wattvisionURL = ${wattvisionURL}"
+			return "fail"
+		} catch (e) {
+			log.error "Wattvision getDataForChild General Exception: ${e}"
+			//log.debug "wattvisionURL = ${wattvisionURL}"
+			return "fail"
 		}
 	}
 }
@@ -164,9 +174,14 @@ def wattvisionURL(senorId, startDate, endDate) {
 	if (diff > 259200000) { // 3 days in milliseconds
 		// Wattvision only allows pulling 3 hours of data at a time
 		startDate = new Date(hours: endDate.hours - 3)
+	} else if (diff < 10000) { // 10 seconds in milliseconds
+		// Wattvision throws errors when the difference between start_time and end_time is 5 seconds or less
+		// So we are going to make sure that we have a few more seconds of breathing room
+		use (groovy.time.TimeCategory) {
+			startDate = endDate - 10.seconds
+		}
 	}
 
-
 	def params = [
 		"sensor_id" : senorId,
 		"api_id"    : wattvisionApiAccess.id,
@@ -480,4 +495,3 @@ def connectionSuccessful(deviceName, iconSrc) {
 
 	render contentType: 'text/html', data: html
 }
-