MSA-1947: .

devicetypes/adamheinmiller/utilitech-glass-break-sensor.src/utilitech-glass-break-sensor.groovy

@@ -1,171 +0,0 @@
-/**
- *  Utilitech Glass Break Sensor
- *
- *  Author: Adam Heinmiller
- *
- *  Date: 2014-11-09
- */
-
-metadata 
-{
-    definition (namespace: "adamheinmiller", name: "Utilitech Glass Break Sensor", author: "Adam Heinmiller") 
-    {
-        capability "Contact Sensor"
-		capability "Battery"
-        
-        fingerprint deviceId:"0xA102", inClusters:"0x20, 0x9C, 0x80, 0x82, 0x84, 0x87, 0x85, 0x72, 0x86, 0x5A"
-	}
-
-    simulator 
-    {
-		status "Activate Sensor": "command: 9C02, payload: 26 00 FF 00 00"
-		status "Reset Sensor": "command: 9C02, payload: 26 00 00 00 00"
-
-        status "Battery Status 25%": "command: 8003, payload: 19"
-        status "Battery Status 50%": "command: 8003, payload: 32"
-        status "Battery Status 75%": "command: 8003, payload: 4B"
-        status "Battery Status 100%": "command: 8003, payload: 64"
-	}
-
-    tiles 
-    {
-        standardTile("contact", "device.contact", width: 2, height: 2) 
-        {
-            state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
-            state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#FF0000"
-        }
-        
-        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") 
-        {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-        
-        main "contact"
-        details(["contact", "battery"])
-    }
-}
-
-def installed()
-{
-	
-	updated()
-}
-
-def updated()
-{
-
-}
-
-def getTimestamp() 
-{
-    return new Date().time
-}
-
-def getBatteryLevel(int pNewLevel)
-{
-	def bl = state.BatteryLevel ?: [pNewLevel, pNewLevel, pNewLevel] as int[]
-
-	def iAvg = 4 + ((int)(pNewLevel + bl[0] + bl[1] + bl[2]) / 4)
-    
-    state.BatteryLevel = [pNewLevel, bl[0], bl[1]]
-    
-    //log.debug "New Bat Level: ${iAvg - (iAvg % 5)}, $state.BatteryLevel" 
-    
-    return iAvg - (iAvg % 5)
-}
-
-
-
-def parse(String description) 
-{
-    def result = []
-    
-    // "0x20, 0x9C, 0x80, 0x82, 0x84, 0x87, 0x85, 0x72, 0x86, 0x5A"
-    
-    def cmd = zwave.parse(description)
-    
-    
-    //log.debug "Parse:  Desc: $description, CMD: $cmd"
-    
-    if (cmd) 
-    {
-        result << zwaveEvent(cmd)
-	}
-    
-    return result
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) 
-{
-    logCommand(cmd)
-
-	def result = []
-    
-
-    result << response(zwave.wakeUpV2.wakeUpNoMoreInformation())
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) 
-{
-    logCommand(cmd)
-
-	def result = []
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) 
-{
-    logCommand(cmd)
-
-	def result = []
-
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) 
-{
-    logCommand(cmd)
-
-    def result = [name: "battery", unit: "%", value: getBatteryLevel(cmd.batteryLevel)]
-    
-    return createEvent(result)
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) 
-{
-    logCommand(cmd)
-
-	
-    def result = [name: "contact"]
-    
-    if (cmd.sensorState == 0)
-    {
-    	result += [value: "closed", descriptionText: "${device.displayName} has reset"]
-    }
-    else if (cmd.sensorState == 255)
-    {
-    	result += [value: "open", descriptionText: "${device.displayName} detected broken glass"]
-    }
-
-
-    return createEvent(result)
-}
-
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) 
-{
-    logCommand("**Unhandled**: $cmd")
-
-	return createEvent([descriptionText: "Unhandled: ${device.displayName}: ${cmd}", displayed: false])
-}
-
-
-def logCommand(cmd)
-{
-	log.debug "Device Command:  $cmd"
-}

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -38,9 +38,9 @@ metadata {
     tiles (scale: 2){      
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#00A0DC"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
 				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
@@ -52,20 +52,20 @@ metadata {
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
 			backgroundColors:[
-				[value: 0,  color: "#153591"], // blue=cold
-				[value: 65, color: "#44b621"], // green
-				[value: 70, color: "#44b621"], // green
-				[value: 75, color: "#f1d801"], // yellow
-				[value: 80, color: "#f1d801"], // yellow
-				[value: 85, color: "#f1d801"], // yellow
-				[value: 90, color: "#d04e00"], // red
-				[value: 95, color: "#bc2323"]  // red=hot
+				[value: 0,  color: "#1010ff"], // blue=cold
+				[value: 65, color: "#a0a0f0"],
+				[value: 70, color: "#e0e050"],
+				[value: 75, color: "#f0d030"], // yellow
+				[value: 80, color: "#fbf020"],
+				[value: 85, color: "#fbdc01"],
+				[value: 90, color: "#fb3a01"],
+				[value: 95, color: "#fb0801"]  // red=hot
 			]
 		}
 

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -34,8 +34,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -95,12 +95,12 @@ metadata {
 		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{  
 			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC" , nextState:"Sent"
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC"
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff", nextState:"Sent"
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff"
-			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"
-			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
 			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
 			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 			} 
@@ -135,13 +135,13 @@ metadata {
     	}        
         
 		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}    
         
 		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}            
@@ -189,13 +189,13 @@ metadata {
         
 		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
 		}        
         
 		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
 		}            
         

devicetypes/mitchpond/centralite-keypad.src/centralite-keypad.groovy

@@ -1,618 +0,0 @@
-/**
- *  Centralite Keypad
- *
- *  Copyright 2015-2016 Mitch Pond, Zack Cornelius
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Centralite Keypad", namespace: "mitchpond", author: "Mitch Pond") {
-
-		capability "Battery"
-		capability "Configuration"
-        capability "Motion Sensor"
-		capability "Sensor"
-		capability "Temperature Measurement"
-		capability "Refresh"
-		capability "Lock Codes"
-		capability "Tamper Alert"
-		capability "Tone"
-		capability "button"
-        capability "polling"
-        capability "Contact Sensor"
-		
-		attribute "armMode", "String"
-        attribute "lastUpdate", "String"
-		
-		command "setDisarmed"
-		command "setArmedAway"
-		command "setArmedStay"
-		command "setArmedNight"
-		command "setExitDelay", ['number']
-		command "setEntryDelay", ['number']
-		command "testCmd"
-		command "sendInvalidKeycodeResponse"
-		command "acknowledgeArmRequest"
-		
-		fingerprint endpointId: "01", profileId: "0104", deviceId: "0401", inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019,0501", manufacturer: "CentraLite", model: "3400", deviceJoinName: "Xfinity 3400-X Keypad"
-		fingerprint endpointId: "01", profileId: "0104", deviceId: "0401", inClusters: "0000,0001,0003,0020,0402,0500,0501,0B05,FC04", outClusters: "0019,0501", manufacturer: "CentraLite", model: "3405-L", deviceJoinName: "Iris 3405-L Keypad"
-	}
-	
-	preferences{
-		input ("tempOffset", "number", title: "Enter an offset to adjust the reported temperature",
-				defaultValue: 0, displayDuringSetup: false)
-		input ("beepLength", "number", title: "Enter length of beep in seconds",
-				defaultValue: 1, displayDuringSetup: false)
-                
-        input ("motionTime", "number", title: "Time in seconds for Motion to become Inactive (Default:10, 0=disabled)",	defaultValue: 10, displayDuringSetup: false)
-	}
-
-    tiles (scale: 2) {
-        multiAttributeTile(name: "keypad", type:"generic", width:6, height:4, canChangeIcon: true) {
-            tileAttribute ("device.armMode", key: "PRIMARY_CONTROL") {            		
-                attributeState("disarmed", label:'${currentValue}', icon:"st.Home.home2", backgroundColor:"#44b621")
-                attributeState("armedStay", label:'ARMED/STAY', icon:"st.Home.home3", backgroundColor:"#ffa81e")
-                attributeState("armedAway", label:'ARMED/AWAY', icon:"st.nest.nest-away", backgroundColor:"#d04e00")
-            }
-            tileAttribute("device.lastUpdate", key: "SECONDARY_CONTROL") {
-                attributeState("default", label:'Updated: ${currentValue}')
-            }
-            /*
-			tileAttribute("device.battery", key: "SECONDARY_CONTROL") {
-				attributeState("default", label:'Battery: ${currentValue}%', unit:"%")
-			}
-			tileAttribute("device.battery", key: "VALUE_CONTROL") {
-				attributeState "VALUE_UP", action: "refresh"
-				attributeState "VALUE_DOWN", action: "refresh"
-			}
-			*/
-            tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-                attributeState "VALUE_UP", action: "refresh"
-                attributeState "VALUE_DOWN", action: "refresh"
-            }
-        }
-
-        valueTile("temperature", "device.temperature", width: 2, height: 2) {
-            state "temperature", label: '${currentValue}°',
-                backgroundColors:[
-                    [value: 31, color: "#153591"],
-                    [value: 44, color: "#1e9cbb"],
-                    [value: 59, color: "#90d2a7"],
-                    [value: 74, color: "#44b621"],
-                    [value: 84, color: "#f1d801"],
-                    [value: 95, color: "#d04e00"],
-                    [value: 96, color: "#bc2323"]
-                ]
-        }
-
-        standardTile("motion", "device.motion", decoration: "flat", canChangeBackground: true, width: 2, height: 2) {
-            state "active", label:'motion',icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-            state "inactive", label:'no motion',icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
-        }
-        standardTile("tamper", "device.tamper", decoration: "flat", canChangeBackground: true, width: 2, height: 2) {
-            state "clear", label: 'Tamper', icon:"st.motion.acceleration.inactive", backgroundColor: "#ffffff"
-            state "detected",  label: 'Tamper', icon:"st.motion.acceleration.active", backgroundColor:"#cc5c5c"
-        }
-        standardTile("Panic", "device.contact", decoration: "flat", canChangeBackground: true, width: 2, height: 2) {
-            state "open", label: 'Panic', icon:"st.security.alarm.alarm", backgroundColor: "#ffffff"
-            state "closed",  label: 'Panic', icon:"st.security.alarm.clear", backgroundColor:"#bc2323"
-        }
-        
-		standardTile("Mode", "device.armMode", decoration: "flat", canChangeBackground: true, width: 2, height: 2) {
-            state "disarmed", label:'OFF', icon:"st.Home.home2", backgroundColor:"#44b621"
-            state "armedStay", label:'OFF', icon:"st.Home.home3", backgroundColor:"#ffffff"
-            state "armedAway", label:'OFF', icon:"st.net.nest-away", backgroundColor:"#ffffff"
-        }
-        
-        standardTile("beep", "device.beep", decoration: "flat", width: 2, height: 2) {
-            state "default", action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
-        }
-        valueTile("battery", "device.battery", decoration: "flat", width: 2, height: 2) {
-            state "battery", label:'${currentValue}% battery', unit:""
-        }
-        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", action:"configuration.configure", icon:"st.secondary.configure"
-        }
-        valueTile("armMode", "device.armMode", decoration: "flat", width: 2, height: 2) {
-            state "armMode", label: '${currentValue}'
-        }
-
-        main (["keypad"])
-        details (["keypad","motion","tamper","Panic","Mode","beep","refresh","battery"])
-    }
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'";
-	def results = [];
-	
-	//------Miscellaneous Zigbee message------//
-	if (description?.startsWith('catchall:')) {
-
-		//log.debug zigbee.parse(description);
-
-		def message = zigbee.parse(description);
-		
-		//------Profile-wide command (rattr responses, errors, etc.)------//
-		if (message?.isClusterSpecific == false) {
-			//------Default response------//
-			if (message?.command == 0x0B) {
-				if (message?.data[1] == 0x81) 
-					log.error "Device: unrecognized command: "+description;
-				else if (message?.data[1] == 0x80) 
-					log.error "Device: malformed command: "+description;
-			}
-			//------Read attributes responses------//
-			else if (message?.command == 0x01) {
-				if (message?.clusterId == 0x0402) {
-					log.debug "Device: read attribute response: "+description;
-
-					results = parseTempAttributeMsg(message)
-				}}
-			else 
-				log.debug "Unhandled profile-wide command: "+description;
-		}
-		//------Cluster specific commands------//
-		else if (message?.isClusterSpecific) {
-			//------IAS ACE------//
-			if (message?.clusterId == 0x0501) {
-				if (message?.command == 0x07) {
-                	motionON()
-				}
-                else if (message?.command == 0x04) {
-                	results = createEvent(name: "button", value: "pushed", data: [buttonNumber: 1], descriptionText: "$device.displayName panic button was pushed", isStateChange: true)
-                    panicContact()
-                }
-				else if (message?.command == 0x00) {
-					results = handleArmRequest(message)
-					log.trace results
-				}
-			}
-			else log.debug "Unhandled cluster-specific command: "+description
-		}
-	}
-	//------IAS Zone Enroll request------//
-	else if (description?.startsWith('enroll request')) {
-		log.debug "Sending IAS enroll response..."
-		results = zigbee.enrollResponse()
-	}
-	//------Read Attribute response------//
-	else if (description?.startsWith('read attr -')) {
-		results = parseReportAttributeMessage(description)
-	}
-	//------Temperature Report------//
-	else if (description?.startsWith('temperature: ')) {
-		log.debug "Got ST-style temperature report.."
-		results = createEvent(getTemperatureResult(zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())))
-		log.debug results
-	}
-    else if (description?.startsWith('zone status ')) {
-    	results = parseIasMessage(description)
-    }
-	return results
-}
-
-
-def configure() {
-    log.debug "--- Configure Called"
-    String hubZigbeeId = swapEndianHex(device.hub.zigbeeEui)
-    def cmd = [
-        //------IAS Zone/CIE setup------//
-        "zcl global write 0x500 0x10 0xf0 {${hubZigbeeId}}", "delay 100",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 200",
-
-        //------Set up binding------//
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x500 {${device.zigbeeId}} {}", "delay 200",
-        "zdo bind 0x${device.deviceNetworkId} 1 1 0x501 {${device.zigbeeId}} {}", "delay 200",
-        
-    ] + 
-    zigbee.configureReporting(1,0x20,0x20,3600,43200,0x01) + 
-    zigbee.configureReporting(0x0402,0x00,0x29,30,3600,0x0064)
-
-    return cmd + refresh()
-}
-
-def poll() { 
-	refresh()
-}
-
-def refresh() {
-	 return sendStatusToDevice() +
-		zigbee.readAttribute(0x0001,0x20) + 
-		zigbee.readAttribute(0x0402,0x00)
-}
-
-private formatLocalTime(time, format = "EEE, MMM d yyyy @ h:mm a z") {
-	if (time instanceof Long) {
-    	time = new Date(time)
-    }
-	if (time instanceof String) {
-    	//get UTC time
-    	time = timeToday(time, location.timeZone)
-    }   
-    if (!(time instanceof Date)) {
-    	return null
-    }
-	def formatter = new java.text.SimpleDateFormat(format)
-	formatter.setTimeZone(location.timeZone)
-	return formatter.format(time)
-}
-
-private parseReportAttributeMessage(String description) {
-	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(":")
-		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
-	}
-	//log.debug "Desc Map: $descMap"
-
-	def results = []
-	
-	if (descMap.cluster == "0001" && descMap.attrId == "0020") {
-		log.debug "Received battery level report"
-		results = createEvent(getBatteryResult(Integer.parseInt(descMap.value, 16)))
-	}
-    else if (descMap.cluster == "0001" && descMap.attrId == "0034")
-    {
-    	log.debug "Received Battery Rated Voltage: ${descMap.value}"
-    }
-    else if (descMap.cluster == "0001" && descMap.attrId == "0036")
-    {
-    	log.debug "Received Battery Alarm Voltage: ${descMap.value}"
-    }
-	else if (descMap.cluster == "0402" && descMap.attrId == "0000") {
-		def value = getTemperature(descMap.value)
-		results = createEvent(getTemperatureResult(value))
-	}
-
-	return results
-}
-
-private parseTempAttributeMsg(message) {
-	byte[] temp = message.data[-2..-1].reverse()
-	createEvent(getTemperatureResult(getTemperature(temp.encodeHex() as String)))
-}
-
-private Map parseIasMessage(String description) {
-    List parsedMsg = description.split(' ')
-    String msgCode = parsedMsg[2]
-    
-    Map resultMap = [:]
-    switch(msgCode) {
-        case '0x0020': // Closed/No Motion/Dry
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0021': // Open/Motion/Wet
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0022': // Tamper Alarm
-            break
-
-        case '0x0023': // Battery Alarm
-            break
-
-        case '0x0024': // Supervision Report
-        	resultMap = getContactResult('closed')
-            break
-
-        case '0x0025': // Restore Report
-        	resultMap = getContactResult('open')
-            break
-
-        case '0x0026': // Trouble/Failure
-            break
-
-        case '0x0028': // Test Mode
-            break
-        case '0x0000':
-			resultMap = createEvent(name: "tamper", value: "clear", isStateChange: true, displayed: false)
-            break
-        case '0x0004':
-			resultMap = createEvent(name: "tamper", value: "detected", isStateChange: true, displayed: false)
-            break;
-        default:
-        	log.debug "Invalid message code in IAS message: ${msgCode}"
-    }
-    return resultMap
-}
-
-
-private Map getMotionResult(value) {
-	String linkText = getLinkText(device)
-	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
-	return [
-		name: 'motion',
-		value: value,
-		descriptionText: descriptionText
-	]
-}
-def motionON() {
-    log.debug "--- Motion Detected"
-    sendEvent(name: "motion", value: "active", displayed:true, isStateChange: true)
-    
-	//-- Calculate Inactive timeout value
-	def motionTimeRun = (settings.motionTime?:0).toInteger()
-
-	//-- If Inactive timeout was configured
-	if (motionTimeRun > 0) {
-		log.debug "--- Will become inactive in $motionTimeRun seconds"
-		runIn(motionTimeRun, "motionOFF")
-	}
-}
-
-def motionOFF() {
-	log.debug "--- Motion Inactive (OFF)"
-    sendEvent(name: "motion", value: "inactive", displayed:true, isStateChange: true)
-}
-
-def panicContact() {
-	log.debug "--- Panic button hit"
-    sendEvent(name: "contact", value: "open", displayed: true, isStateChange: true)
-    runIn(3, "panicContactClose")
-}
-
-def panicContactClose()
-{
-	sendEvent(name: "contact", value: "closed", displayed: true, isStateChange: true)
-}
-
-//TODO: find actual good battery voltage range and update this method with proper values for min/max
-//
-//Converts the battery level response into a percentage to display in ST
-//and creates appropriate message for given level
-
-private getBatteryResult(rawValue) {
-	def linkText = getLinkText(device)
-
-	def result = [name: 'battery']
-
-	def volts = rawValue / 10
-	def descriptionText
-	if (volts > 3.5) {
-		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
-	}
-	else {
-		def minVolts = 2.5
-		def maxVolts = 3.0
-		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		result.value = Math.min(100, (int) pct * 100)
-		result.descriptionText = "${linkText} battery was ${result.value}%"
-	}
-
-	return result
-}
-
-private getTemperature(value) {
-	def celcius = Integer.parseInt(value, 16).shortValue() / 100
-	if(getTemperatureScale() == "C"){
-		return celcius
-	} else {
-		return celsiusToFahrenheit(celcius) as Integer
-	}
-}
-
-private Map getTemperatureResult(value) {
-	log.debug 'TEMP'
-	def linkText = getLinkText(device)
-	if (tempOffset) {
-		def offset = tempOffset as int
-		def v = value as int
-		value = v + offset
-	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
-	return [
-		name: 'temperature',
-		value: value,
-		descriptionText: descriptionText
-	]
-}
-
-//------Command handlers------//
-private handleArmRequest(message){
-	def keycode = new String(message.data[2..-2] as byte[],'UTF-8')
-	def reqArmMode = message.data[0]
-	//state.lastKeycode = keycode
-	log.debug "Received arm command with keycode/armMode: ${keycode}/${reqArmMode}"
-
-	//Acknowledge the command. This may not be *technically* correct, but it works
-	/*List cmds = [
-				 "raw 0x501 {09 01 00 0${reqArmMode}}", "delay 200",
-				 "send 0x${device.deviceNetworkId} 1 1", "delay 500"
-				]
-	def results = cmds?.collect { new physicalgraph.device.HubAction(it) } + createCodeEntryEvent(keycode, reqArmMode)
-	*/
-	def results = createCodeEntryEvent(keycode, reqArmMode)
-	log.trace "Method: handleArmRequest(message): "+results
-	return results
-}
-
-def createCodeEntryEvent(keycode, armMode) {
-	createEvent(name: "codeEntered", value: keycode as String, data: armMode as String, 
-				isStateChange: true, displayed: false)
-}
-
-//
-//The keypad seems to be expecting responses that are not in-line with the HA 1.2 spec. Maybe HA 1.3 or Zigbee 3.0??
-//
-private sendStatusToDevice() {
-	log.debug 'Sending status to device...'
-	def armMode = device.currentValue("armMode")
-	log.trace 'Arm mode: '+armMode
-	def status = ''
-	if (armMode == null || armMode == 'disarmed') status = 0
-	else if (armMode == 'armedAway') status = 3
-	else if (armMode == 'armedStay') status = 1
-	else if (armMode == 'armedNight') status = 2
-	
-	// If we're not in one of the 4 basic modes, don't update the status, don't want to override beep timings, exit delay is dependent on it being correct
-	if (status != '')
-	{
-		return sendRawStatus(status)
-	}
-    else
-    {
-    	return []
-    }
-}
-
-
-// Statuses:
-// 00 - Disarmed
-// 01 - Armed partial
-// 02 - Armed partial
-// 03 - Armed Away
-// 04 - ?
-// 05 - Fast beep (1 per second)
-// 05 - Entry delay (Uses seconds) Appears to keep the status lights as it was
-// 06 - Amber status blink (Ignores seconds)
-// 07 - ?
-// 08 - Red status blink
-// 09 - ?
-// 10 - Exit delay Slow beep (2 per second, accelerating to 1 beep per second for the last 10 seconds) - With red flashing status - Uses seconds
-// 11 - ?
-// 12 - ?
-// 13 - ?
-
-private sendRawStatus(status, seconds = 00) {
-	log.debug "Sending Status ${zigbee.convertToHexString(status)}${zigbee.convertToHexString(seconds)} to device..."
-    
-    // Seems to require frame control 9, which indicates a "Server to client" cluster specific command (which seems backward? I thought the keypad was the server)
-    List cmds = ["raw 0x501 {09 01 04 ${zigbee.convertToHexString(status)}${zigbee.convertToHexString(seconds)}}",
-    			 "send 0x${device.deviceNetworkId} 1 1", 'delay 100']
-                 
-    def results = cmds?.collect { new physicalgraph.device.HubAction(it) };
-    return results
-}
-
-def notifyPanelStatusChanged(status) {
-	//TODO: not yet implemented. May not be needed.
-}
-//------------------------//
-
-def setDisarmed() { setModeHelper("disarmed",0) }
-def setArmedAway(def delay=0) { setModeHelper("armedAway",delay) }
-def setArmedStay(def delay=0) { setModeHelper("armedStay",delay) }
-def setArmedNight(def delay=0) { setModeHelper("armedNight",delay) }
-
-def setEntryDelay(delay) {
-	setModeHelper("entryDelay", delay)
-	sendRawStatus(5, delay) // Entry delay beeps
-}
-
-def setExitDelay(delay) {
-	setModeHelper("exitDelay", delay)
-	sendRawStatus(10, delay)  // Exit delay
-}
-
-private setModeHelper(String armMode, delay) {
-	sendEvent([name: "armMode", value: armMode, data: [delay: delay as int], isStateChange: true])
-    def lastUpdate = formatLocalTime(now())
-    sendEvent(name: "lastUpdate", value: lastUpdate, displayed: false)
-	sendStatusToDevice()
-}
-
-private setKeypadArmMode(armMode){
-	Map mode = [disarmed: '00', armedAway: '03', armedStay: '01', armedNight: '02', entryDelay: '', exitDelay: '']
-    if (mode[armMode] != '')
-    {
-		return ["raw 0x501 {09 01 04 ${mode[armMode]}00}",
-				 "send 0x${device.deviceNetworkId} 1 1", 'delay 100']
-    }
-}
-
-def acknowledgeArmRequest(armMode){
-	List cmds = [
-				 "raw 0x501 {09 01 00 0${armMode}}",
-				 "send 0x${device.deviceNetworkId} 1 1", "delay 100"
-				]
-	def results = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	log.trace "Method: acknowledgeArmRequest(armMode): "+results
-	return results
-}
-
-def sendInvalidKeycodeResponse(){
-	List cmds = [
-				 "raw 0x501 {09 01 00 04}",
-				 "send 0x${device.deviceNetworkId} 1 1", "delay 100"
-				]
-				 
-	log.trace 'Method: sendInvalidKeycodeResponse(): '+cmds
-	return (cmds?.collect { new physicalgraph.device.HubAction(it) }) + sendStatusToDevice()
-}
-
-def beep(def beepLength = settings.beepLength) {
-	if ( beepLength == null )
-	{
-		beepLength = 0
-	}
-	def len = zigbee.convertToHexString(beepLength, 2)
-	List cmds = ["raw 0x501 {09 01 04 05${len}}", 'delay 200',
-				 "send 0x${device.deviceNetworkId} 1 1", 'delay 500']
-	cmds
-}
-
-//------Utility methods------//
-
-private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}
-//------------------------//
-
-private testCmd(){
-	//log.trace zigbee.parse('catchall: 0104 0501 01 01 0140 00 4F2D 01 00 0000 07 00 ')
-	//beep(10)
-	//test exit delay
-	//log.debug device.zigbeeId
-	//testingTesting()
-	//discoverCmds()
-	//zigbee.configureReporting(1,0x20,0x20,3600,43200,0x01)		//battery reporting
-	//["raw 0x0001 {00 00 06 00 2000 20 100E FEFF 01}",
-	//"send 0x${device.deviceNetworkId} 1 1"]
-	//zigbee.command(0x0003, 0x00, "0500") //Identify: blinks connection light
-    
-	//log.debug 		//temperature reporting  
-    
-	return zigbee.readAttribute(0x0020,0x01) + 
-		    zigbee.readAttribute(0x0020,0x02) +
-		    zigbee.readAttribute(0x0020,0x03)
-}
-
-private discoverCmds(){
-	List cmds = ["raw 0x0501 {08 01 11 0011}", 'delay 200',
-				 "send 0x${device.deviceNetworkId} 1 1", 'delay 500']
-	cmds
-}
-
-private testingTesting() {
-	log.debug "Delay: "+device.currentState("armMode").toString()
-	List cmds = ["raw 0x501 {09 01 04 050A}", 'delay 200',
-				 "send 0x${device.deviceNetworkId} 1 1", 'delay 500']
-	cmds
-}

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -103,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} lux', unit:""
+			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -410,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} lux', unit:""
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -282,4 +282,5 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
+}
+

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} lux', unit:""
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -193,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -68,8 +68,8 @@
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#e86d13"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#ffa81e"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -86,7 +86,7 @@
 		}
         standardTile("tamper", "device.alarm") {
 			state("secure", label:'secure',    icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
+			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -62,8 +62,8 @@ metadata {
 			state "off", label: '${name}', action: "on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
         }
         standardTile("contact", "device.contact", inactiveLabel: false) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 		}
         standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"

devicetypes/smartthings/smartalert-siren.src/README.md

@@ -4,7 +4,7 @@ Cloud Execution
 
 Works with:
 
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/products/fortrezz-siren-strobe-alarm)
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
 
 ## Table of contents
 

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -44,9 +44,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -56,8 +56,8 @@ metadata {
 			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC")
 		}
 		standardTile("contact", "device.contact") {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat") {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -22,16 +22,16 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13", action: "close")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
 		}
 		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
-			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 		}
 		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
-			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 		}
 		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -25,8 +25,8 @@ metadata {
 
 	tiles(scale: 2) {
 		standardTile("contact", "device.contact", width: 4, height: 4) {
-			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#00A0DC")
-			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#e86d13")
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
 		}
 		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
 		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -27,7 +27,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 		}
@@ -35,7 +35,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
@@ -59,7 +59,7 @@ metadata {
 			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "VALUE_CONTROL") {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -40,11 +40,11 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#cccccc"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -38,11 +38,11 @@
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''
@@ -50,11 +50,11 @@
         }
 
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
             state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
             state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
         }
 
         standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,7 +64,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -85,11 +84,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -124,12 +123,7 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() +
-	zigbee.levelRefresh() +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-	zigbee.onOffConfig(0, 300) +
-	zigbee.levelConfig()
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def configure() {
@@ -139,38 +133,26 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	refresh()
+	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value)
 }
 
-private getScaledHue(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() +
-	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
 }
 
 def setHue(value) {
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -179,4 +161,4 @@ def installed() {
 			sendEvent(name: "level", value: 100)
 		}
 	}
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -46,9 +46,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -78,7 +78,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -103,11 +102,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
@@ -142,13 +141,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-    zigbee.onOffConfig(0, 300) +
-    zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def configure() {
@@ -163,12 +156,7 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -192,31 +180,19 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
-private getScaledHue(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() +
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
 }
 
 def setHue(value) {
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -225,4 +201,4 @@ def installed() {
             sendEvent(name: "level", value: 100)
         }
     }
-}
+}

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -41,9 +41,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2015 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -45,9 +45,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -71,11 +71,6 @@ metadata {
     }
 }
 
-// Globals
-private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -128,11 +123,7 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.colorTemperatureRefresh() +
-    zigbee.onOffConfig(0, 300) +
-    zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def configure() {
@@ -147,12 +138,7 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-	value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -49,9 +49,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -55,7 +55,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -73,11 +72,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -109,46 +108,28 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() +
-	zigbee.levelConfig()
+	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
-	zigbee.onOffRefresh() +
-	zigbee.levelRefresh() +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
-private getScaledHue(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() +
-	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
 }
 
 def setHue(value) {
-	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-	//payload-> sat value, transition time
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
 }

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -70,7 +70,6 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
-private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -89,11 +88,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
                 sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
@@ -125,16 +124,11 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() +
-    zigbee.levelConfig()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.colorTemperatureRefresh() +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -145,32 +139,17 @@ def setLevel(value) {
     zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
-private getScaledHue(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
-private getScaledSaturation(value) {
-    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
-}
-
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() +
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.onOffRefresh() +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
 }
 
 def setHue(value) {
-    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
 }
 
 def setSaturation(value) {
-    //payload-> sat value, transition time
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -66,11 +66,6 @@ metadata {
     }
 }
 
-// Globals
-private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -100,14 +95,14 @@ def setLevel(value) {
 }
 
 def refresh() {
-    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 
-    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
+        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
     }
 
-    cmds
+	cmds
 }
 
 def poll() {
@@ -143,7 +138,7 @@ def configure() {
     log.debug "configure()"
     configureHealthCheck()
     // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def updated() {
@@ -153,12 +148,7 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -68,11 +68,6 @@ metadata {
     }
 }
 
-// Globals
-private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
-private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
-private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
-
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -99,11 +94,7 @@ def setLevel(value) {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() +
-    zigbee.levelRefresh() +
-    zigbee.colorTemperatureRefresh() +
-    zigbee.onOffConfig() +
-    zigbee.levelConfig()
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
 }
 
 def poll() {
@@ -138,7 +129,8 @@ def configureHealthCheck() {
 def configure() {
     log.debug "configure()"
     configureHealthCheck()
-    refresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+
 }
 
 def updated() {
@@ -148,12 +140,7 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    value = value as Integer
-    def tempInMired = (1000000 / value) as Integer
-    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
-
-    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zwave-water-valve.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-water-valve.src/README.md

@@ -1,38 +0,0 @@
-# Z-Wave Water Valve
-
-Cloud Execution
-
-Works with: 
-
-* [Leak Intelligence Leak Gopher Water Shutoff Valve](https://www.smartthings.com/works-with-smartthings/other/leak-intelligence-leak-gopher-water-shutoff-valve)
-
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Valve** - allows for the control of a valve device
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE`
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leak Intelligence Leak Gopher Water Shutoff Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209631423-Leak-Gopher-Z-Wave-Valve-Control)
-
-

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -14,14 +14,12 @@
 metadata {
 	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
 		capability "Valve"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x1006", inClusters: "0x25"
-		fingerprint mfr:"0173", prod:"0003", model:"0002", deviceJoinName: "Leak Intelligence Leak Gopher Water Shutoff Valve"
 	}
 
 	// simulator metadata
@@ -55,14 +53,7 @@ metadata {
 
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response(refresh())
 }
 
@@ -123,13 +114,6 @@ def poll() {
     zwave.switchBinaryV1.switchBinaryGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
     log.debug "refresh() is called"
     def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -765,6 +765,7 @@ def turnOffSwitch() {
         } else {
             
             device.off();
+                  
             return [Device_id: params.id, result_action: "200"]
         }
 }
@@ -788,7 +789,6 @@ def getTempSensorsStatus(id) {
             return []
         } else {
         	def bat = getBatteryStatus(device.id)
-            def scale = [Scale: location.temperatureScale]
-        	return [temperature: device.currentValue('temperature')] + bat + scale
+        	return [temperature: device.currentValue('temperature')] + bat
    		}
-   }
+   }

smartapps/naissan/lights-off-with-no-motion-and-presence.src/lights-off-with-no-motion-and-presence.groovy

@@ -15,66 +15,66 @@ definition(
 )
 
 preferences {
-  section("Light switches to turn off") {
-    input "switches", "capability.switch", title: "Choose light switches", multiple: true
-  }
-  section("Turn off when there is no motion and presence") {
-    input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
-    input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
-  }
-  section("Delay before turning off") {
-    input "delayMins", "number", title: "Minutes of inactivity?"
-  }
+	section("Light switches to turn off") {
+		input "switches", "capability.switch", title: "Choose light switches", multiple: true
+	}
+	section("Turn off when there is no motion and presence") {
+		input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
+   		input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
+	}
+	section("Delay before turning off") {                    
+		input "delayMins", "number", title: "Minutes of inactivity?"
+	}
 }
 
 def installed() {
-  subscribe(motionSensor, "motion", motionHandler)
-  subscribe(presenceSensors, "presence", presenceHandler)
+	subscribe(motionSensor, "motion", motionHandler)
+    subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def updated() {
-  unsubscribe()
-  subscribe(motionSensor, "motion", motionHandler)
-  subscribe(presenceSensors, "presence", presenceHandler)
+	unsubscribe()
+	subscribe(motionSensor, "motion", motionHandler)
+    subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def motionHandler(evt) {
-  log.debug "handler $evt.name: $evt.value"
-  if (evt.value == "inactive") {
-    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
-  }
+	log.debug "handler $evt.name: $evt.value"
+	if (evt.value == "inactive") {
+		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
+	}
 }
 
 def presenceHandler(evt) {
-  log.debug "handler $evt.name: $evt.value"
-  if (evt.value == "not present") {
-    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
-  }
+	log.debug "handler $evt.name: $evt.value"
+	if (evt.value == "not present") {
+		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
+	}
 }
 
 def isActivePresence() {
-  // check all the presence sensors, make sure none are present
-  def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
-  !noPresence
+	// check all the presence sensors, make sure none are present
+	def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
+	!noPresence		
 }
 
 def scheduleCheck() {
-  log.debug "scheduled check"
-  def motionState = motionSensor.currentState("motion")
+	log.debug "scheduled check"
+	def motionState = motionSensor.currentState("motion")
     if (motionState.value == "inactive") {
-      def elapsed = now() - motionState.rawDateCreated.time
-      def threshold = 1000 * 60 * delayMins - 1000
-      if (elapsed >= threshold) {
-        if (!isActivePresence()) {
-          log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
-          switches.off()
-        } else {
-          log.debug "Presence is active: do nothing"
+        def elapsed = now() - motionState.rawDateCreated.time
+    	def threshold = 1000 * 60 * delayMins - 1000
+    	if (elapsed >= threshold) {
+        	if (!isActivePresence()) {
+            	log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
+            	switches.off()
+            } else {
+            	log.debug "Presence is active: do nothing"
+            }
+    	} else {
+        	log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
         }
-      } else {
-        log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
-      }
     } else {
-      log.debug "Motion is active: do nothing"
+    	log.debug "Motion is active: do nothing"
     }
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,7 +1,3 @@
-import javax.crypto.Mac;
-import javax.crypto.spec.SecretKeySpec;
-import java.security.InvalidKeyException;
-
 /**
  *  OpenT2T SmartApp Test
  *
@@ -43,7 +39,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -59,7 +55,7 @@ preferences {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
-		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
 		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
 		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
@@ -70,49 +66,44 @@ preferences {
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors ?: []
-	inputList += garageDoors ?: []
-	inputList += locks ?: []
-	inputList += cameras ?: []
-	inputList += motionSensors ?: []
-	inputList += presenceSensors ?: []
-	inputList += switches ?: []
-	inputList += thermostats ?: []
-	inputList += waterSensors ?: []
+	inputList += contactSensors?: []
+	inputList += garageDoors?: []
+	inputList += locks?: []
+	inputList += cameras?: []
+	inputList += motionSensors?: []
+	inputList += presenceSensors?: []
+	inputList += switches?: []
+	inputList += thermostats?: []
+	inputList += waterSensors?: []
 	return inputList
 }
 
 //API external Endpoints
 mappings {
 	path("/devices") {
-		action:
-		[
+		action: [
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action:
-		[
+		action: [
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action:
-		[
+		action: [
 				PUT: "updateDevice"
 		]
 	}
 	path("/deviceSubscription") {
-		action:
-		[
-				POST  : "registerDeviceChange",
+		action: [
+				POST: "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
 	path("/locationSubscription") {
-		action:
-		[
-				POST  : "registerDeviceGraph",
+		action: [
+				POST: "registerDeviceGraph",
 				DELETE: "unregisterDeviceGraph"
 		]
 	}
@@ -125,21 +116,14 @@ def installed() {
 
 def updated() {
 	log.debug "Updating with settings: ${settings}"
-
-	//Initialize state variables if didn't exist.
-	if (state.deviceSubscriptionMap == null) {
+	if(state.deviceSubscriptionMap == null){
 		state.deviceSubscriptionMap = [:]
 		log.debug "deviceSubscriptionMap created."
 	}
-	if (state.locationSubscriptionMap == null) {
+	if( state.locationSubscriptionMap == null){
 		state.locationSubscriptionMap = [:]
 		log.debug "locationSubscriptionMap created."
 	}
-	if (state.verificationKeyMap == null) {
-		state.verificationKeyMap = [:]
-		log.debug "verificationKeyMap created."
-	}
-
 	unsubscribe()
 	registerAllDeviceSubscriptions()
 }
@@ -148,11 +132,9 @@ def initialize() {
 	log.debug "Initializing with settings: ${settings}"
 	state.deviceSubscriptionMap = [:]
 	log.debug "deviceSubscriptionMap created."
+	registerAllDeviceSubscriptions()
 	state.locationSubscriptionMap = [:]
 	log.debug "locationSubscriptionMap created."
-	state.verificationKeyMap = [:]
-	log.debug "verificationKeyMap created."
-	registerAllDeviceSubscriptions()
 }
 
 /*** Subscription Functions  ***/
@@ -166,7 +148,7 @@ def registerAllDeviceSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
+		theAtts.each {att ->
 			subscribe(myDevice, att.name, deviceEventHandler)
 			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
@@ -178,38 +160,31 @@ def registerDeviceChange() {
 	def subscriptionEndpt = params.subscriptionURL
 	def deviceId = params.deviceId
 	def myDevice = findDevice(deviceId)
-
-	if (myDevice == null) {
+	if( myDevice == null ){
 		httpError(404, "Cannot find device with device ID ${deviceId}.")
 	}
 
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each { att ->
+		theAtts.each {att ->
 			subscribe(myDevice, att.name, deviceEventHandler)
 		}
 		log.info "Subscribing for ${myDevice.displayName}"
 
-		if (subscriptionEndpt != null) {
-			if (state.deviceSubscriptionMap[deviceId] == null) {
+		if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
-			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
 				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
-
-			if (params.key != null) {
-				state.verificationKeyMap[subscriptionEndpt] = params.key
-				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
-			}
 		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
 
 	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
-	log.info "Current verification key map is ${state.verificationKeyMap}"
 	return ["succeed"]
 }
 
@@ -219,19 +194,18 @@ def unregisterDeviceChange() {
 	def deviceId = params.deviceId
 	def myDevice = findDevice(deviceId)
 
-	if (myDevice == null) {
+	if( myDevice == null ){
 		httpError(404, "Cannot find device with device ID ${deviceId}.")
 	}
 
 	try {
-		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
-			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)) {
-				if (state.deviceSubscriptionMap[deviceId].size() == 1) {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
 					state.deviceSubscriptionMap.remove(deviceId)
 				} else {
 					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
 				}
-				state.verificationKeyMap.remove(subscriptionEndpt)
 				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 		} else {
@@ -243,33 +217,25 @@ def unregisterDeviceChange() {
 	}
 
 	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
-	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //Endpoints function: Subscribe to device additiona/removal updated in a location
 def registerDeviceGraph() {
 	def subscriptionEndpt = params.subscriptionURL
 
-	if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
+	if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
 		subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
 		subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
 		subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
 
-		if (state.locationSubscriptionMap[location.id] == null) {
+		if(state.locationSubscriptionMap[location.id] == null){
 			state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
 			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
-		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)) {
+		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
 			state.locationSubscriptionMap[location.id] << subscriptionEndpt
 			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
 		}
-
-		if (params.key != null) {
-			state.verificationKeyMap[subscriptionEndpt] = params.key
-			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
-		}
-
 		log.info "Current location subscription map is ${state.locationSubscriptionMap}"
-		log.info "Current verification key map is ${state.verificationKeyMap}"
 		return ["succeed"]
 	} else {
 		httpError(400, "missing input parameter: subscriptionURL")
@@ -281,17 +247,16 @@ def unregisterDeviceGraph() {
 	def subscriptionEndpt = params.subscriptionURL
 
 	try {
-		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
-			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)) {
-				if (state.locationSubscriptionMap[location.id].size() == 1) {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
 					state.locationSubscriptionMap.remove(location.id)
 				} else {
 					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
 				}
-				state.verificationKeyMap.remove(subscriptionEndpt)
 				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
 			}
-		} else {
+		}else{
 			httpError(400, "missing input parameter: subscriptionURL")
 		}
 	} catch (e) {
@@ -299,40 +264,28 @@ def unregisterDeviceGraph() {
 	}
 
 	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
-	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
 def deviceEventHandler(evt) {
-	def evtDevice = evt.device
-	def evtDeviceType = getDeviceType(evtDevice)
-	def deviceData = [];
+	def evt_device = evt.device
+	def evt_deviceType = getDeviceType(evt_device)
+	def deviceInfo
 
-	if (evt.data != null) {
+	def params = [ body: [deviceName: evt_device.displayName, deviceId: evt_device.id,  locationId: location.id] ]
+
+	if(evt.data != null){
 		def evtData = parseJson(evt.data)
-		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
+		log.info "Received event for ${evt_device.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
 	}
 
-	if (evtDeviceType == "thermostat") {
-		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id]
-	} else {
-		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id]
-	}
-
-	def params = [body: deviceData]
-
 	//send event to all subscriptions urls
-	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
-	state.deviceSubscriptionMap[evtDevice.id].each {
+	log.debug "Current subscription urls for ${evt_device.displayName} is ${state.deviceSubscriptionMap[evt_device.id]}"
+	state.deviceSubscriptionMap[evt_device.id].each {
 		params.uri = "${it}"
-		if (state.verificationKeyMap[it] != null) {
-			def key = state.verificationKeyMap[it]
-			params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
-		}
 		log.trace "POST URI: ${params.uri}"
-		log.trace "Header: ${params.header}"
 		log.trace "Payload: ${params.body}"
-		try {
+		try{
 			httpPostJson(params) { resp ->
 				log.trace "response status code: ${resp.status}"
 				log.trace "response data: ${resp.data}"
@@ -345,27 +298,20 @@ def deviceEventHandler(evt) {
 
 def locationEventHandler(evt) {
 	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
-	switch (evt.name) {
+	switch(evt.name){
 		case "DeviceCreated":
 		case "DeviceDeleted":
-			def evtDevice = evt.device
-			def evtDeviceType = getDeviceType(evtDevice)
-			def params = [body: [eventType: evt.name, deviceId: evtDevice.id, locationId: location.id]]
+			def evt_device = evt.device
+			def evt_deviceType = getDeviceType(evt_device)
+			log.info "DeviceName: ${evt_device.displayName}, DeviceID: ${evt_device.id}, deviceType: ${evt_deviceType}"
 
-			if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null) {
-				state.deviceSubscriptionMap.remove(evtDevice.id)
-			}
+			def params = [ body: [ eventType:evt.name, deviceId: evt_device.id, locationId: location.id ] ]
 
 			state.locationSubscriptionMap[location.id].each {
 				params.uri = "${it}"
-				if (state.verificationKeyMap[it] != null) {
-					def key = state.verificationKeyMap[it]
-					params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
-				}
 				log.trace "POST URI: ${params.uri}"
-				log.trace "Header: ${params.header}"
 				log.trace "Payload: ${params.body}"
-				try {
+				try{
 					httpPostJson(params) { resp ->
 						log.trace "response status code: ${resp.status}"
 						log.trace "response data: ${resp.data}"
@@ -380,23 +326,6 @@ def locationEventHandler(evt) {
 	}
 }
 
-private ComputHMACValue(key, data) {
-	try {
-		SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
-		Mac mac = Mac.getInstance("HmacSHA1")
-		mac.init(secretKeySpec)
-		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
-		return byteArrayToString(digest)
-	} catch (InvalidKeyException e) {
-		log.error "Invalid key exception while converting to HMac SHA1"
-	}
-}
-
-private def byteArrayToString(byte[] data) {
-	BigInteger bigInteger = new BigInteger(1, data)
-	String hash = bigInteger.toString(16)
-	return hash
-}
 
 /*** Device Query/Update Functions  ***/
 
@@ -405,10 +334,10 @@ def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if (deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+		if(deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
 		} else {
-			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 		}
 	}
 
@@ -421,10 +350,10 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if (deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+	if(deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
 	} else {
-		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
 
 	log.debug "getDevice, return: ${device}"
@@ -437,18 +366,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command) {
+		if (command){
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
 
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find { it.name == value }) {
+				if (location.modes?.find {it.name == value}) {
 					location.setMode(value)
 				}
-			} else if (command == "thermostatSetpoint") {
-				switch (device.currentThermostatMode) {
+			}else if (command == "thermostatSetpoint"){
+				switch(device.currentThermostatMode){
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -462,7 +391,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			} else if (!device) {
+			}else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -472,11 +401,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if (value.isNumber()) {
+				} else if(value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value) {
+				} else if (value){
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -503,16 +432,17 @@ private getDeviceType(device) {
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
 
 	//Loop through the device capability list to determine the device type.
-	capabilities.each { capability ->
-		switch (capability.name.toLowerCase()) {
+	capabilities.each {capability ->
+		switch(capability.name.toLowerCase())
+		{
 			case "switch":
 				deviceType = "switch"
 
 				//If the device also contains "Switch Level" capability, identify it as a "light" device.
-				if (capabilities.any { it.name.toLowerCase() == "switch level" }) {
+				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
 
 					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
-					if (capabilities.any { it.name.toLowerCase() == "power meter" }) {
+					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
 						deviceType = "dimmerSwitch"
 						return deviceType
 					} else {
@@ -559,24 +489,24 @@ private deviceAttributeList(device, deviceType) {
 	allAttributes.each { attribute ->
 		try {
 			def currentState = device.currentState(attribute.name)
-			if (currentState != null) {
-				switch (attribute.name) {
+			if(currentState != null ){
+				switch(attribute.name){
 					case 'temperature':
-						attributeList.putAll([(attribute.name): currentState.value, 'temperatureScale': location.temperatureScale])
+						attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
 						break;
 					default:
-						attributeList.putAll([(attribute.name): currentState.value])
+						attributeList.putAll([(attribute.name): currentState.value ])
 						break;
 				}
-				if (deviceType == "genericSensor") {
+				if( deviceType == "genericSensor" ){
 					def key = attribute.name + "_lastUpdated"
-					attributeList.putAll([(key): currentState.isoDate])
+					attributeList.putAll([ (key): currentState.isoDate ])
 				}
 			} else {
-				attributeList.putAll([(attribute.name): null]);
+				attributeList.putAll([ (attribute.name): null ]);
 			}
-		} catch (e) {
-			attributeList.putAll([(attribute.name): null]);
+		} catch(e) {
+			attributeList.putAll([ (attribute.name): null ]);
 		}
 	}
 	return attributeList
@@ -649,7 +579,8 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			} else if (value == 0 || value == "0" || value == "unlock") {
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -658,5 +589,5 @@ private mapDeviceCommands(command, value) {
 			break
 	}
 
-	return [resultCommand, resultValue]
+	return [resultCommand,resultValue]
 }

smartapps/smartthings/left-it-open.src/left-it-open.groovy

@@ -27,82 +27,84 @@ definition(
 
 preferences {
 
-  section("Monitor this door or window") {
-    input "contact", "capability.contactSensor"
-  }
-
-  section("And notify me if it's open for more than this many minutes (default 10)") {
-    input "openThreshold", "number", description: "Number of minutes", required: false
-  }
-
-  section("Delay between notifications (default 10 minutes") {
-    input "frequency", "number", title: "Number of minutes", description: "", required: false
-  }
-
-  section("Via text message at this number (or via push notification if not specified") {
-    input("recipients", "contact", title: "Send notifications to") {
-      input "phone", "phone", title: "Phone number (optional)", required: false
+	section("Monitor this door or window") {
+		input "contact", "capability.contactSensor"
+	}
+	section("And notify me if it's open for more than this many minutes (default 10)") {
+		input "openThreshold", "number", description: "Number of minutes", required: false
+	}
+    section("Delay between notifications (default 10 minutes") {
+        input "frequency", "number", title: "Number of minutes", description: "", required: false
     }
-  }
+	section("Via text message at this number (or via push notification if not specified") {
+        input("recipients", "contact", title: "Send notifications to") {
+            input "phone", "phone", title: "Phone number (optional)", required: false
+        }
+	}
 }
 
 def installed() {
-  log.trace "installed()"
-  subscribe()
+	log.trace "installed()"
+	subscribe()
 }
 
 def updated() {
-  log.trace "updated()"
-  unsubscribe()
-  subscribe()
+	log.trace "updated()"
+	unsubscribe()
+	subscribe()
 }
 
 def subscribe() {
-  subscribe(contact, "contact.open", doorOpen)
-  subscribe(contact, "contact.closed", doorClosed)
+	subscribe(contact, "contact.open", doorOpen)
+	subscribe(contact, "contact.closed", doorClosed)
 }
 
-def doorOpen(evt) {
-  log.trace "doorOpen($evt.name: $evt.value)"
-  def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
-  runIn(delay, doorOpenTooLong, [overwrite: true])
+def doorOpen(evt)
+{
+	log.trace "doorOpen($evt.name: $evt.value)"
+	def t0 = now()
+	def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
+	runIn(delay, doorOpenTooLong, [overwrite: false])
+	log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
 }
 
-def doorClosed(evt) {
-  log.trace "doorClosed($evt.name: $evt.value)"
-  unschedule(doorOpenTooLong)
+def doorClosed(evt)
+{
+	log.trace "doorClosed($evt.name: $evt.value)"
 }
 
 def doorOpenTooLong() {
-  def contactState = contact.currentState("contact")
-  def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
+	def contactState = contact.currentState("contact")
+    def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
 
-  if (contactState.value == "open") {
-    def elapsed = now() - contactState.rawDateCreated.time
-    def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
-    if (elapsed >= threshold) {
-      log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
-      sendMessage()
-      runIn(freq, doorOpenTooLong, [overwrite: false])
-    } else {
-      log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
-    }
-  } else {
-    log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
-  }
+	if (contactState.value == "open") {
+		def elapsed = now() - contactState.rawDateCreated.time
+		def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+		if (elapsed >= threshold) {
+			log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
+			sendMessage()
+            runIn(freq, doorOpenTooLong, [overwrite: false])
+		} else {
+			log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
+		}
+	} else {
+		log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
+	}
 }
 
-void sendMessage() {
-  def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
-  def msg = "${contact.displayName} has been left open for ${minutes} minutes."
-  log.info msg
-  if (location.contactBookEnabled) {
-    sendNotificationToContacts(msg, recipients)
-  } else {
-    if (phone) {
-      sendSms phone, msg
-    } else {
-      sendPush msg
+void sendMessage()
+{
+	def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
+	def msg = "${contact.displayName} has been left open for ${minutes} minutes."
+	log.info msg
+    if (location.contactBookEnabled) {
+        sendNotificationToContacts(msg, recipients)
+    }
+    else {
+        if (phone) {
+            sendSms phone, msg
+        } else {
+            sendPush msg
+        }
     }
-  }
 }

smartapps/smartthings/power-allowance.src/power-allowance.groovy

@@ -1,57 +1,57 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Power Allowance
- *
- *  Author: SmartThings
- */
-definition(
-    name: "Power Allowance",
-    namespace: "smartthings",
-    author: "SmartThings",
-    description: "Save energy or restrict total time an appliance (like a curling iron or TV) can be in use.  When a switch turns on, automatically turn it back off after a set number of minutes you specify.",
-    category: "Green Living",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/light_outlet.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/light_outlet@2x.png"
-)
-
-preferences {
-	section("When a switch turns on...") {
-		input "theSwitch", "capability.switch"
-	}
-	section("Turn it off how many minutes later?") {
-		input "minutesLater", "number", title: "When?"
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	subscribe(theSwitch, "switch.on", switchOnHandler, [filterEvents: false])
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	subscribe(theSwitch, "switch.on", switchOnHandler, [filterEvents: false])
-}
-
-def switchOnHandler(evt) {
-	log.debug "Switch ${theSwitch} turned: ${evt.value}"
-	def delay = minutesLater * 60
-	log.debug "Turning off in ${minutesLater} minutes (${delay}seconds)"
-	runIn(delay, turnOffSwitch)
-}
-
-def turnOffSwitch() {
-	theSwitch.off()
-}
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Power Allowance
+ *
+ *  Author: SmartThings
+ */
+definition(
+    name: "Power Allowance",
+    namespace: "smartthings",
+    author: "SmartThings",
+    description: "Save energy or restrict total time an appliance (like a curling iron or TV) can be in use.  When a switch turns on, automatically turn it back off after a set number of minutes you specify.",
+    category: "Green Living",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/light_outlet.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/light_outlet@2x.png"
+)
+
+preferences {
+	section("When a switch turns on...") {
+		input "theSwitch", "capability.switch"
+	}
+	section("Turn it off how many minutes later?") {
+		input "minutesLater", "number", title: "When?"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribe(theSwitch, "switch.on", switchOnHandler, [filterEvents: false])
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	subscribe(theSwitch, "switch.on", switchOnHandler, [filterEvents: false])
+}
+
+def switchOnHandler(evt) {
+	log.debug "Switch ${theSwitch} turned: ${evt.value}"
+	def delay = minutesLater * 60
+	log.debug "Turning off in ${minutesLater} minutes (${delay}seconds)"
+	runIn(delay, turnOffSwitch)
+}
+
+def turnOffSwitch() {
+	theSwitch.off()
+}

smartapps/statusbits/smart-alarm.src/smart-alarm.groovy

@@ -296,10 +296,7 @@ def pageHistory() {
             if (history.size() == 0) {
                 paragraph "No history available."
             } else {
-            	history.each() {
-                	def text = ""  + new Date(it.time + location.timeZone.rawOffset ).format("yyyy-MM-dd HH:mm") + ": " + it.event + " - " + it.description
-                	paragraph text
-                }
+                paragraph "Not implemented"
             }
         }
     }
@@ -408,7 +405,6 @@ def pageConfigureZones() {
                 section("${it.displayName} (contact)") {
                     input "type_${devId}", "enum", title:"Zone Type", metadata:[values:zoneTypes], defaultValue:"exterior"
                     input "delay_${devId}", "bool", title:"Entry/Exit Delays", defaultValue:true
-                    input "chime_${devId}", "bool", title:"Chime on open", defaultValue:true
                 }
             }
         }
@@ -420,7 +416,6 @@ def pageConfigureZones() {
                 section("${it.displayName} (motion)") {
                     input "type_${devId}", "enum", title:"Zone Type", metadata:[values:zoneTypes], defaultValue:"interior"
                     input "delay_${devId}", "bool", title:"Entry/Exit Delays", defaultValue:false
-                    input "chime_${devId}", "bool", title:"Chime on motion", defaultValue:false
                 }
             }
         }
@@ -432,7 +427,6 @@ def pageConfigureZones() {
                 section("${it.displayName} (movement)") {
                     input "type_${devId}", "enum", title:"Zone Type", metadata:[values:zoneTypes], defaultValue:"interior"
                     input "delay_${devId}", "bool", title:"Entry/Exit Delays", defaultValue:false
-                    input "chime_${devId}", "bool", title:"Chime on movement", defaultValue:false
                 }
             }
         }
@@ -444,7 +438,6 @@ def pageConfigureZones() {
                 section("${it.displayName} (smoke)") {
                     input "type_${devId}", "enum", title:"Zone Type", metadata:[values:zoneTypes], defaultValue:"alert"
                     input "delay_${devId}", "bool", title:"Entry/Exit Delays", defaultValue:false
-                    input "chime_${devId}", "bool", title:"Chime on smoke", defaultValue:false
                 }
             }
         }
@@ -456,7 +449,6 @@ def pageConfigureZones() {
                 section("${it.displayName} (moisture)") {
                     input "type_${devId}", "enum", title:"Zone Type", metadata:[values:zoneTypes], defaultValue:"alert"
                     input "delay_${devId}", "bool", title:"Entry/Exit Delays", defaultValue:false
-                    input "chime_${devId}", "bool", title:"Chime on water", defaultValue:false
                 }
             }
         }
@@ -479,14 +471,6 @@ def pageArmingOptions() {
         "is armed without setting off an alarm. You can optionally disable " +
         "entry and exit delay when the alarm is armed in Stay mode."
 
-	def inputKeypads = [
-    	name:		"keypads",
-        type: 		"capability.lockCodes",
-        title: 		"Keypads for Exit / Entry delay",
-        multiple:	true,
-        required:	false
-    ]
-
     def inputAwayModes = [
         name:       "awayModes",
         type:       "mode",
@@ -523,19 +507,10 @@ def pageArmingOptions() {
     def inputDelayStay = [
         name:       "stayDelayOff",
         type:       "bool",
-        title:      "Disable alarm (entry) delay in Stay mode",
+        title:      "Disable delays in Stay mode",
         defaultValue: false,
         required:   true
     ]
-    
-    def inputExitDelayStay = [
-    	name:			"stayExitDelayOff",
-        type:			"bool",
-        title:			"Disable arming (exit) delay in Stay mode",
-        defaultValue: 	true,
-        required:		true
-    ]
-        
 
     def pageProperties = [
         name:       "pageArmingOptions",
@@ -549,21 +524,16 @@ def pageArmingOptions() {
             paragraph helpArming
         }
 
-		section("Keypads") {
-        	input inputKeypads
-        }
-        
         section("Modes") {
             input inputAwayModes
             input inputStayModes
             input inputDisarmModes
         }
-        
+
         section("Exit and Entry Delay") {
             paragraph helpDelay
             input inputDelay
             input inputDelayStay
-			input inputExitDelayStay
         }
     }
 }
@@ -593,14 +563,6 @@ def pageAlarmOptions() {
         defaultValue:   "Both"
     ]
 
-    def inputSirenEntryStrobe = [
-    	name:           "sirenEntryStrobe",
-        type:           "bool",
-        title:          "Strobe siren during entry delay",
-        defaultValue:   true,
-        required:       true
-    ]
-
     def inputSwitches = [
         name:           "switches",
         type:           "capability.switch",
@@ -640,7 +602,6 @@ def pageAlarmOptions() {
         section("Sirens") {
             input inputAlarms
             input inputSirenMode
-            input inputSirenEntryStrobe
         }
         section("Switches") {
             input inputSwitches
@@ -663,49 +624,7 @@ def pageNotifications() {
         "disarmed or when an alarm is set off. Notifications can be send " +
         "using either Push messages, SMS (text) messages and Pushbullet " +
         "messaging service. Smart Alarm can also notify you with sounds or " +
-        "voice alerts using compatible audio devices, such as Sonos." +
-        "Or using a SmartAlarm dashboard virtual device."
-    
-    def inputNotificationDevice = [
-        name:       "notificationDevice",
-        type:       "capability.notification",
-        title:      "Which smart alarm notification device?",
-        multiple:   false,
-        required:   false
-    ]
-
-    def inputChimeDevices = [
-    	name:			"chimeDevices",
-        type:           "capability.tone",
-        title:          "Which Chime Devices?",
-        multiple:       true,
-        required:       false
-    ]
-        
-
-   def inputSirenOnWaterAlert = [
-        name:       "sirenOnWaterAlert",
-        type:       "bool",
-        title:      "Use Siren for Water Leak?",
-        defaultValue: true,
-        required:   true
-    ]
-     
-   def inputSirenOnSmokeAlert = [
-        name:       "sirenOnSmokeAlert",
-        type:       "bool",
-        title:      "Use Siren for Smoke Alert?",
-        defaultValue: true,
-        required:   true
-    ]
-    
-   def inputSirenOnIntrusionAlert = [
-        name:       "sirenOnIntrusionAlert",
-        type:       "bool",
-        title:      "Use Siren for Intrusion Alert?",
-        defaultValue: true,
-        required:   true
-    ]
+        "voice alerts using compatible audio devices, such as Sonos."
 
     def inputPushAlarm = [
         name:           "pushMessage",
@@ -888,19 +807,6 @@ def pageNotifications() {
         section("Notification Options") {
             paragraph helpAbout
         }
-        section("Notification Device")
-        {
-            input inputNotificationDevice
-        }
-        section("Chime Devices") {
-			input inputChimeDevices
-        }
-        section("Siren Notifcations")
-        {
-            input inputSirenOnWaterAlert
-            input inputSirenOnSmokeAlert
-            input inputSirenOnIntrusionAlert
-        }
         section("Push Notifications") {
             input inputPushAlarm
             input inputPushStatus
@@ -1141,7 +1047,6 @@ private def setupInit() {
         state.zones = []
         state.alarms = []
         state.history = []
-        state.alertType = "None"
     } else {
         def version = state.version as String
         if (version == null || version.startsWith('1')) {
@@ -1160,7 +1065,7 @@ private def initialize() {
     clearAlarm()
     state.delay = settings.delay?.toInteger() ?: 30
     state.offSwitches = []
-    //state.history = []
+    state.history = []
 
     if (settings.awayModes?.contains(location.mode)) {
         state.armed = true
@@ -1177,20 +1082,8 @@ private def initialize() {
     initButtons()
     initRestApi()
     subscribe(location, onLocation)
-    
-    if (settings.notificationDevice)
-    {
-        subscribe(settings.notificationDevice, "switch.off", gotDismissMessage)
-    }
 
     STATE()
-    reportStatus()
-}
-
-def gotDismissMessage(evt)
-{
-    log.debug "Got the dismiss message from the notification device.. clearing alarm!"
-    clearAlarm()
 }
 
 private def clearAlarm() {
@@ -1210,7 +1103,6 @@ private def clearAlarm() {
         }
         state.offSwitches = []
     }
-    reportStatus()
 }
 
 private def initZones() {
@@ -1231,8 +1123,7 @@ private def initZones() {
                 deviceId:   it.id,
                 sensorType: "contact",
                 zoneType:   settings["type_${it.id}"] ?: "exterior",
-                delay:      settings["delay_${it.id}"],
-                chime:		settings["chime_${it.id}"]
+                delay:      settings["delay_${it.id}"]
             ]
         }
         subscribe(settings.z_contact, "contact.open", onContact)
@@ -1244,8 +1135,7 @@ private def initZones() {
                 deviceId:   it.id,
                 sensorType: "motion",
                 zoneType:   settings["type_${it.id}"] ?: "interior",
-                delay:      settings["delay_${it.id}"],
-                chime:		settings["chime_${it.id}"]
+                delay:      settings["delay_${it.id}"]
             ]
         }
         subscribe(settings.z_motion, "motion.active", onMotion)
@@ -1257,8 +1147,7 @@ private def initZones() {
                 deviceId:   it.id,
                 sensorType: "acceleration",
                 zoneType:   settings["type_${it.id}"] ?: "interior",
-                delay:      settings["delay_${it.id}"],
-                chime:		settings["chime_${it.id}"]
+                delay:      settings["delay_${it.id}"]
             ]
         }
         subscribe(settings.z_movement, "acceleration.active", onMovement)
@@ -1270,8 +1159,7 @@ private def initZones() {
                 deviceId:   it.id,
                 sensorType: "smoke",
                 zoneType:   settings["type_${it.id}"] ?: "alert",
-                delay:      settings["delay_${it.id}"],
-                chime:		settings["chime_${it.id}"]
+                delay:      settings["delay_${it.id}"]
             ]
         }
         subscribe(settings.z_smoke, "smoke.detected", onSmoke)
@@ -1286,8 +1174,7 @@ private def initZones() {
                 deviceId:   it.id,
                 sensorType: "water",
                 zoneType:   settings["type_${it.id}"] ?: "alert",
-                delay:      settings["delay_${it.id}"],
-                chime:		settings["chime_${it.id}"]
+                delay:      settings["delay_${it.id}"]
             ]
         }
         subscribe(settings.z_water, "water.wet", onWater)
@@ -1370,37 +1257,20 @@ def onWater(evt)    { onZoneEvent(evt, "water") }
 private def onZoneEvent(evt, sensorType) {
     LOG("onZoneEvent(${evt.displayName}, ${sensorType})")
 
-    state.alertType = sensorType
     def zone = getZoneForDevice(evt.deviceId, sensorType)
     if (!zone) {
         log.warn "Cannot find zone for device ${evt.deviceId}"
-        state.alertType = "None"
         return
     }
 
     if (zone.armed) {
         state.alarms << evt.displayName
         if (zone.zoneType == "alert" || !zone.delay || (state.stay && settings.stayDelayOff)) {
-            history("Alarm", "Alarm triggered by ${sensorType} sensor ${evt.displayName}")
             activateAlarm()
         } else {
-            history("Entry Delay", "Entry delay triggered by ${sensorType} sensor ${evt.displayName}")
-        	if(settings.sirenEntryStrobe)
-            {
-        		settings.alarms*.strobe()
-            }
-        	keypads?.each() { it.setEntryDelay(state.delay) }
             myRunIn(state.delay, activateAlarm)
         }
     }
-    else if (zone.chime)
-    {
-    	chimeDevices?.each() { 
-               	it.beep()
-            }
-    }
-    
-    
 }
 
 def onLocation(evt) {
@@ -1441,27 +1311,23 @@ def onButtonEvent(evt) {
 
 def armAway() {
     LOG("armAway()")
-	history("Armed Away", "Alarm armed away")
 
     if (!atomicState.armed || atomicState.stay) {
         armPanel(false)
     }
-    reportStatus()
 }
 
 def armStay() {
     LOG("armStay()")
-	history("Armed Stay", "Alarm armed stay")
 
     if (!atomicState.armed || !atomicState.stay) {
         armPanel(true)
     }
-    reportStatus()
 }
 
 def disarm() {
     LOG("disarm()")
-	history("Disarmed", "Alarm disarmed")
+
     if (atomicState.armed) {
         state.armed = false
         state.zones.each() {
@@ -1469,12 +1335,9 @@ def disarm() {
                 it.armed = false
             }
         }
-        
-        keypads?.each() { it.setDisarmed() }
 
         reset()
     }
-    reportStatus()
 }
 
 def panic() {
@@ -1501,7 +1364,6 @@ def reset() {
 
     notify(msg)
     notifyVoice()
-    reportStatus()
 }
 
 def exitDelayExpired() {
@@ -1521,16 +1383,6 @@ def exitDelayExpired() {
             it.armed = true
         }
     }
-    
- 	if(stay)
-    {
-   		keypads?.each() { it.setArmedStay() }
-    }
-    else
-    {
-     	keypads?.each() { it.setArmedAway() }
-    }
-    	
 
     def msg = "${location.name}: all "
     if (stay) {
@@ -1554,7 +1406,7 @@ private def armPanel(stay) {
     state.zones.each() {
         def zoneType = it.zoneType
         if (zoneType == "exterior") {
-            if (it.delay && !(stay && settings.stayExitDelayOff)) {
+            if (it.delay) {
                 it.armed = false
                 armDelay = true
             } else {
@@ -1572,22 +1424,10 @@ private def armPanel(stay) {
         }
     }
 
-    def delay = armDelay && !(stay && settings.stayExitDelayOff) ? atomicState.delay : 0
+    def delay = armDelay && !(stay && settings.stayDelayOff) ? atomicState.delay : 0
     if (delay) {
-    	keypads?.each() { it.setExitDelay(delay) }
         myRunIn(delay, exitDelayExpired)
     }
-    else
-    {
-    	if(stay)
-        {
-    		keypads?.each() { it.setArmedStay() }
-        }
-        else
-        {
-        	keypads?.each() { it.setArmedAway() }
-        }
-    }
 
     def mode = stay ? "STAY" : "AWAY"
     def msg = "${location.name} "
@@ -1692,50 +1532,21 @@ def activateAlarm() {
         log.warn "activateAlarm: false alarm"
         return
     }
-    history("Alarm", "Alarm Triggered")
 
-    if(settings.sirenEntryStrobe)
-    {
-    	settings.alarms*.off()
+    switch (settings.sirenMode) {
+    case "Siren":
+        settings.alarms*.siren()
+        break
+
+    case "Strobe":
+        settings.alarms*.strobe()
+        break
+        
+    case "Both":
+        settings.alarms*.both()
+        break
     }
-    
-    def atype = state.alertType
 
-    if ((atype == "Water" && settings.sirenOnWaterAlert) ||
-        (atype == "Smoke" && settings.sirenOnSmokeAlert) ||
-       ((atype == "contact" || atype == "acceleration" || atype == "motion") && settings.sirenOnIntrusionAlert))
-    {
-        switch (settings.sirenMode) {
-        case "Siren":
-            settings.alarms*.siren()
-            break
-
-        case "Strobe":
-            settings.alarms*.strobe()
-            break
-            
-        case "Both":
-            settings.alarms*.both()
-            break
-        }
-    }
-    else
-    { 
-    log.debug "No siren for $atype Alert"
-    }
-}
-  
-def activateAlarmPostDelay(String lastAlertType)
-{
-// no alarm check here as if door opens only for second with delay and system is not disarmed
-// we still want alarm even if door is closed after delay.. Basically like real alarm the delay is only
-// to disarm the system. Otherwise someone can open door come it, quickly close and there is not alarm LGK.
-
-// issue here is that after delay we could have lost the alert type so pass it in
- log.debug "activate alarm post delay check - alert type = $lastAlertType"
- 
- activateSirenAfterCheck(lastAlertType)
- 
     // Only turn on those switches that are currently off
     def switchesOn = settings.switches?.findAll { it?.currentSwitch == "off" }
     LOG("switchesOn: ${switchesOn}")
@@ -1759,8 +1570,6 @@ def activateAlarmPostDelay(String lastAlertType)
     notify(msg)
     notifyVoice()
 
-    reportStatus()
-    
     myRunIn(180, reset)
 }
 
@@ -1859,61 +1668,12 @@ private def notifyVoice() {
     }
 }
 
-def reportStatus()
-{
-    log.debug "in report status"
-    log.debug "notification device = ${settings.notificationDevice}"
-
-    if (settings.notificationDevice)
-    {
-        def phrase = ""
-        if (state.alarms.size())
-        {
-            phrase = "Alert: Alarm at ${location.name}!"
-            notificationDevice.deviceNotification(phrase)
-            log.debug "sending notification alert: = $phrase"
-            def zones = "Zones: "
-            state.alarms.each()
-            {
-                //log.debug "in loop it"
-                //log.debug "it = $it"
-                zones = "Zones: "
-                zones += " $it" +"\n"
-            }
-            notificationDevice.deviceNotification(zones)
-            log.debug "sending nofication zones = $zones" 
-                
-            // send zone type
-            phrase = "AlertType: "
-            def atype = state.alertType
-            if (atype == null)
-                atype = "None"
-            phrase += " $atype"
-            notificationDevice.deviceNotification(phrase)
-            log.debug "sending nofication alert type = $phrase" 
-        }
-        else
-        {
-            phrase = "Status: "
-            if (state.armed)
-              {
-                def mode = state.stay ? "Armed - Stay" : "Armed - Away"
-                phrase += "${mode}"
-            } else {
-                phrase += "Disarmed"
-            }
-            log.debug "sending notification status = $phrase"
-        notificationDevice.deviceNotification(phrase)
-       }
-    }
- }
-
 private def history(String event, String description = "") {
     LOG("history(${event}, ${description})")
 
     def history = atomicState.history
     history << [time: now(), event: event, description: description]
-    if (history.size() > 20) {
+    if (history.size() > 10) {
         history = history.sort{it.time}
         history = history[1..-1]
     }
@@ -2090,27 +1850,3 @@ private def LOG(message) {
 private def STATE() {
     //log.trace "state: ${state}"
 }
-
-def onAlarmSystemStatus(evt) {
-    LOG("Alarm System Status has been changed to '${evt.value}'")
-    String mode = evt.value.toLowerCase()
-    if (mode == "away") {
-        armAway()
-    } else if (mode == "stay") {
-        armStay()
-    } else if (mode == "off") {
-        disarm()
-    }
-}
-
-def setAlarmMode(name) {
-    LOG("Alarm System Status will be set to '${name}'")
-    def event = [
-        name: "alarmSystemStatus",
-        value: name,
-        isStateChange: true,
-        displayed: true,
-        description: "alarm system status is ${name}",
-    ]
-    sendLocationEvent(event)
-}