Merge pull request #2064 from SmartThingsCommunity/staging

Rolling down staging to master

devicetypes/erocm123/inovelli-2-channel-smart-plug.src/inovelli-2-channel-smart-plug.groovy

@@ -0,0 +1,266 @@
+/**
+ *
+ *  Inovelli 2-Channel Smart Plug
+ *
+ *  github: Eric Maycock (erocm123)
+ *  Date: 2017-04-27
+ *  Copyright Eric Maycock
+ *
+ *  Includes all configuration parameters and ease of advanced configuration.
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition(name: "Inovelli 2-Channel Smart Plug", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Actuator"
+		capability "Sensor"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Health Check"
+		fingerprint manufacturer: "015D", prod: "0221", model: "251C"
+	}
+	simulator {}
+	preferences {}
+	tiles {
+		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
+			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
+				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
+				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
+		}
+		main(["switch"])
+		details(["switch",
+				 childDeviceTiles("all"), "refresh"
+		])
+	}
+}
+def parse(String description) {
+	def result = []
+	def cmd = zwave.parse(description)
+	if (cmd) {
+		result += zwaveEvent(cmd)
+		logging("Parsed ${cmd} to ${result.inspect()}", 1)
+	} else {
+		logging("Non-parsed event: ${description}", 2)
+	}
+	return result
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
+	logging("BasicReport ${cmd} - ep ${ep}", 2)
+	if (ep) {
+		def event
+		childDevices.each {
+			childDevice ->
+				if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
+					childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+				}
+		}
+		if (cmd.value) {
+			event = [createEvent([name: "switch", value: "on"])]
+		} else {
+			def allOff = true
+			childDevices.each {
+				n ->
+					if (n.currentState("switch").value != "off") allOff = false
+			}
+			if (allOff) {
+				event = [createEvent([name: "switch", value: "off"])]
+			} else {
+				event = [createEvent([name: "switch", value: "on"])]
+			}
+		}
+		return event
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	logging("BasicSet ${cmd}", 2)
+	def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+	def cmds = []
+	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
+	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	return [result, response(commands(cmds))] // returns the result of reponse()
+}
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
+	logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
+	if (ep) {
+		def event
+		def childDevice = childDevices.find {
+			it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
+		}
+		if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
+		if (cmd.value) {
+			event = [createEvent([name: "switch", value: "on"])]
+		} else {
+			def allOff = true
+			childDevices.each {
+				n->
+					if (n.currentState("switch").value != "off") allOff = false
+			}
+			if (allOff) {
+				event = [createEvent([name: "switch", value: "off"])]
+			} else {
+				event = [createEvent([name: "switch", value: "on"])]
+			}
+		}
+		return event
+	} else {
+		def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+		def cmds = []
+		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
+		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+		return [result, response(commands(cmds))] // returns the result of reponse()
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	logging("MultiChannelCmdEncap ${cmd}", 2)
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+	}
+}
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	logging("ManufacturerSpecificReport ${cmd}", 2)
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	logging("msr: $msr", 2)
+	updateDataValue("MSR", msr)
+}
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// This will capture any commands not handled by other instances of zwaveEvent
+	// and is recommended for development so you can see every command the device sends
+	logging("Unhandled Event: ${cmd}", 2)
+}
+def on() {
+	logging("on()", 1)
+	commands([
+			zwave.switchAllV1.switchAllOn(),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	])
+}
+def off() {
+	logging("off()", 1)
+	commands([
+			zwave.switchAllV1.switchAllOff(),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
+	])
+}
+void childOn(String dni) {
+	logging("childOn($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+void childOff(String dni) {
+	logging("childOff($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+void childRefresh(String dni) {
+	logging("childRefresh($dni)", 1)
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
+	sendHubCommand(cmds, 1000)
+}
+def poll() {
+	logging("poll()", 1)
+	commands([
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
+	])
+}
+def refresh() {
+	logging("refresh()", 1)
+	commands([
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
+			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
+	])
+}
+def ping() {
+	logging("ping()", 1)
+	refresh()
+}
+def installed() {
+	logging("installed()", 1)
+	command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
+	createChildDevices()
+}
+def updated() {
+	logging("updated()", 1)
+	if (!childDevices) {
+		createChildDevices()
+	} else if (device.label != state.oldLabel) {
+		childDevices.each {
+			if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
+				def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
+				it.setLabel(newLabel)
+			}
+		}
+		state.oldLabel = device.label
+	}
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
+}
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+	logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
+}
+private encap(cmd, endpoint) {
+	if (endpoint) {
+		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
+	} else {
+		cmd
+	}
+}
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
+	}
+}
+private commands(commands, delay = 1000) {
+	delayBetween(commands.collect {
+		command(it)
+	}, delay)
+}
+private channelNumber(String dni) {
+	dni.split("-ep")[-1] as Integer
+}
+private void createChildDevices() {
+	state.oldLabel = device.label
+	for (i in 1..2) {
+		addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
+																						 isComponent: true, componentName: "ep$i", componentLabel: "Channel $i"
+		])
+	}
+}
+
+private def logging(message, level) {
+	if (logLevel != "0") {
+		switch (logLevel) {
+			case "1":
+				if (level > 1) log.debug "$message"
+				break
+			case "99":
+				log.debug "$message"
+				break
+		}
+	}
+}

devicetypes/erocm123/switch-child-device.src/switch-child-device.groovy

@@ -0,0 +1,49 @@
+/**
+ *  Switch Child Device
+ *
+ *  Copyright 2017 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Switch Child Device", namespace: "erocm123", author: "Eric Maycock") {
+		capability "Switch"
+		capability "Actuator"
+		capability "Sensor"
+		capability "Refresh"
+	}
+
+	tiles {
+		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+	}
+}
+
+void on() {
+	parent.childOn(device.deviceNetworkId)
+}
+
+void off() {
+	parent.childOff(device.deviceNetworkId)
+}
+
+void refresh() {
+	parent.childRefresh(device.deviceNetworkId)
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -39,8 +39,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
 			}
         }
 

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -37,8 +37,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
+				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
 			}
         }
 

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Battery"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
+		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
 	}
 
 	simulator {
@@ -130,5 +131,12 @@ def updated() {
 }
 
 def initialize() {
-	sendEvent(name: "numberOfButtons", value: 4)
+	def zwMap = getZwaveInfo()
+	def buttons = 4 // Default for Key Fob
+
+	// Only one button for Aeon Panic Button
+	if (zwMap && zwMap.mfr == "0086" && zwMap.prod == "0001" && zwMap.model == "0026") {
+		buttons = 1
+	}
+	sendEvent(name: "numberOfButtons", value: buttons)
 }

devicetypes/smartthings/aeon-multisensor-6.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -0,0 +1,43 @@
+# Aeon Multisensor 6
+
+Cloud Execution
+
+Works with: 
+
+* [Aeon Labs MultiSensor 6](https://www.smartthings.com/products/aeon-labs-multisensor-6)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Ultraviolet Index** - gives the ability to get the ultraviolet index from devices that report it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Aeon Labs MultiSensor 6 is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon Labs MultiSensor 6 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226)

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -29,6 +30,7 @@ metadata {
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
+		fingerprint mfr:"0086", prod:"0102", model:"0064", deviceJoinName: "Aeon Labs MultiSensor 6"
 	}
 
 	simulator {
@@ -127,7 +129,14 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 
@@ -326,6 +335,13 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"

devicetypes/smartthings/aeon-multisensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -0,0 +1,48 @@
+# Aeon Multisensor
+
+Cloud Execution
+
+Works with: 
+
+* [Aeotec MultiSensor (DSB05-ZWUS)](https://www.smartthings.com/products/aeotec-multisensor-5)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Motion Sensor** - can detect motion
+* **Temperature Measurement** - defines device measures current temperature
+* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
+* **Illuminance Measurement** - gives the illuminance reading from devices that support it
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+
+
+## Device Health
+
+Aeon Labs MultiSensor is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Battery Specification
+
+Four AAA batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [Aeon MultiSensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-How-to-connect-Aeon-Labs-MultiSensors)

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -93,6 +94,16 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 // Parse incoming device messages to generate events
 def parse(String description)
 {
@@ -179,6 +190,13 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	[:]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	secure(zwave.batteryV1.batteryGet())
+}
+
 def configure() {
 	delayBetween([
 		// send binary sensor report instead of basic set for motion

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,7 +16,7 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
@@ -61,6 +61,8 @@ metadata {
 def installed() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
+	response(secure(zwave.basicV1.basicGet()))
 }
 
 def updated() {
@@ -163,4 +165,4 @@ private secure(physicalgraph.zwave.Command cmd) {
  * */
 def ping() {
 	secure(zwave.basicV1.basicGet())
-}
+}

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -9,6 +9,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"
 
@@ -18,6 +19,7 @@ metadata {
 		command "quickSetHeat"
 
 		fingerprint deviceId: "0x08", inClusters: "0x43,0x40,0x44,0x31,0x80,0x85,0x60"
+		fingerprint mfr:"0098", prod:"6401", model:"0107", deviceJoinName: "2Gig CT100 Programmable Thermostat"
 	}
 
 	// simulator metadata
@@ -106,6 +108,16 @@ metadata {
 	}
 }
 
+def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def parse(String description)
 {
 	def result = []
@@ -439,6 +451,14 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),

devicetypes/smartthings/everspring-illuminance-sensor.src/everspring-illuminance-sensor.groovy

@@ -0,0 +1,163 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST815 Illuminance Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring Illuminance Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Illuminance Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0007", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "illuminace ${i} lux": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 3:
+			// luminance
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			map.name = "illuminance"
+			break;
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report lux change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 30).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/everspring-st814.src/everspring-st814.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST814 Temperature/Humidity Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring ST814", namespace: "smartthings", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Relative Humidity Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0006", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "humidity ${i}%": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 5).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 1:
+			/* temperature */
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			break
+		case 5:
+			/* humidity */
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "%"
+			map.name = "humidity"
+			break
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	def result = null
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
+	if (encapsulatedCommand) {
+		result = zwaveEvent(encapsulatedCommand)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report temperature change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: 2).format(),
+
+		// Auto report humidity change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -107,8 +107,8 @@
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
         standardTile("acceleration", "device.acceleration") {
-			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
+			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
 		}
 
 

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -12,13 +12,13 @@
  *
  */
 metadata {
-	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
 		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
-        
+
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
 		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
@@ -34,19 +34,22 @@ metadata {
 	}
 
 	// tile definitions
-	tiles {
-		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
-			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+	tiles(scale: 2) {
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+			}
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+
+		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "contact"
-		details(["contact","refresh"])
+		main "valve"
+		details(["valve","refresh"])
 	}
 }
 
@@ -62,22 +65,23 @@ def updated(){
 
 def parse(String description) {
 	log.trace description
-	def result = null
 	def cmd = zwave.parse(description)
 	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
+		return zwaveEvent(cmd)
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Could not parse message"
+	return null
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value ? "closed" : "open"
-	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	[:] // Handles all Z-Wave commands we aren't interested in
+	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -98,3 +102,9 @@ def ping() {
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
+
+def createEventWithDebug(eventMap) {
+	def event = createEvent(eventMap)
+	log.debug "Event created with ${event?.descriptionText}"
+	return event
+}

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
+		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -61,8 +61,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
+				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#00A0DC"
+				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#cccccc"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -87,8 +87,8 @@ metadata {
 			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
+			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#00a0dc")
+			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#cccccc")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label: '${currentValue}°',
@@ -178,7 +178,7 @@ private List<Map> handleAcceleration(descMap) {
 			result += parseAxis(descMap.additionalAttrs)
 		}
 	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs
+		def addAttrs = descMap.additionalAttrs ?: []
 		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
 		result += parseAxis(addAttrs)
 	}

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -46,8 +46,8 @@
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC")
       		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -34,7 +34,7 @@ import physicalgraph.zigbee.zcl.DataType
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
 	}
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -27,7 +27,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles(scale: 2) {
         multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -83,6 +83,9 @@ def parse(String description) {
             }
         }
         sendEvent(event)
+        //handle valve attribute
+        event.name = "valve"
+        sendEvent(event)
     }
     else {
         def descMap = zigbee.parseDescriptionAsMap(description)

devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy

@@ -75,6 +75,10 @@ def parse(String description) {
 	return result
 }
 
+def uninstalled() {
+	sendEvent(name: "epEvent", value: "delete all", isStateChange: true, displayed: false, descriptionText: "Delete endpoint devices")
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	[ createEvent(descriptionText: "${device.displayName} woke up", isStateChange:true),
 	  response(["delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]) ]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,9 +30,15 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
-		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
 		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
+		fingerprint mfr:"0086", prod:"0102", model:"0059", deviceJoinName: "Aeon Labs Recessed Door Sensor"
+		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
+		fingerprint mfr:"014A", prod:"0001", model:"0003", deviceJoinName: "Ecolink Tilt Sensor"
 		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
+		fingerprint mfr:"014F", prod:"2001", model:"0102", deviceJoinName: "Nortek GoControl Door/Window Sensor"
+		fingerprint mfr:"0063", prod:"4953", model:"3031", deviceJoinName: "Jasco Hinge Pin Door Sensor"
+		fingerprint mfr:"019A", prod:"0003", model:"0003", deviceJoinName: "Sensative Strips"
+
 	}
 
 	// simulator metadata
@@ -107,9 +113,9 @@ def updated() {
 
 def configure() {
 	commands([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
-		zwave.batteryV1.batteryGet()
-	], 6000)
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW),
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+	], 1000)
 }
 
 def sensorValueEvent(value) {
@@ -184,11 +190,17 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
+
+	if (device.currentValue("contact") == null) { // Incase our initial request didn't make it
+		cmds << command(zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW))
+	}
+
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
-	} else {
+	} else { // If we check the battery state we will send NoMoreInfo in the handler for BatteryReport so that we definitely get the report
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
+
 	[event, response(cmds)]
 }
 

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -26,7 +26,24 @@ metadata {
 
 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
-		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
+		fingerprint mfr:"0090", prod:"0001", model:"0236", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0238", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0001", model:"0001", deviceJoinName: "KwikSet SmartCode 910 Contemporary Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0339", deviceJoinName: "KwikSet SmartCode 912 Lever Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"4006", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock" //backlit version
+		fingerprint mfr:"0090", prod:"0003", model:"0440", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0001", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"0090", prod:"0003", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"6341", model:"0544", deviceJoinName: "Schlage Camelot Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"6341", model:"5044", deviceJoinName: "Schlage Century Touchscreen Deadbolt Door Lock"
+		fingerprint mfr:"003B", prod:"634B", model:"504C", deviceJoinName: "Schlage Connected Keypad Lever Door Lock"
+		fingerprint mfr:"0129", prod:"0002", model:"0800", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD120
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD220, YRD240
+		fingerprint mfr:"0129", prod:"0002", model:"FFFF", deviceJoinName: "Yale Touchscreen Lever Door Lock" // YRD220
+		fingerprint mfr:"0129", prod:"0004", model:"0800", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD110
+		fingerprint mfr:"0129", prod:"0004", model:"0000", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD210
+		fingerprint mfr:"0129", prod:"0001", model:"0000", deviceJoinName: "Yale Push Button Lever Door Lock" // YRD210
+		fingerprint mfr:"0129", prod:"8002", model:"0600", deviceJoinName: "Yale Assure Lock with Bluetooth"
 	}
 
 	simulator {
@@ -69,13 +86,13 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
 def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch pings if no device events received for 1 hour (checkInterval)
+	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch pings if no device events received for 1 hour (checkInterval)
+	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -135,6 +152,10 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupported
 
 def zwaveEvent(DoorLockOperationReport cmd) {
 	def result = []
+
+	unschedule("followupStateCheck")
+	unschedule("stateCheck")
+
 	def map = [ name: "lock" ]
 	if (cmd.doorLockMode == 0xFF) {
 		map.value = "locked"
@@ -348,7 +369,7 @@ def zwaveEvent(UserCodeReport cmd) {
 			code = state["set$name"] ?: decrypt(state[name]) ?: "****"
 			state.remove("set$name".toString())
 		} else {
-			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
+			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ], isStateChange: true ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
 			map.isStateChange = true
@@ -439,11 +460,12 @@ def zwaveEvent(physicalgraph.zwave.commands.timev1.TimeGet cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
 	// The old Schlage locks use group 1 for basic control - we don't want that, so unsubscribe from group 1
 	def result = [ createEvent(name: "lock", value: cmd.value ? "unlocked" : "locked") ]
-	result << response(zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	if (state.assoc != zwaveHubNodeId) {
-		result << response(zwave.associationV1.associationGet(groupingIdentifier:2))
-	}
-	result
+	def cmds = [
+			zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId).format(),
+			"delay 1200",
+			zwave.associationV1.associationGet(groupingIdentifier:2).format()
+	]
+	[result, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
@@ -513,11 +535,18 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
 def ping() {
-	refresh()
+	runIn(30, followupStateCheck)
+	secure(zwave.doorLockV1.doorLockOperationGet())
+}
+
+def followupStateCheck() {
+	runEvery1Hour(stateCheck)
+	stateCheck()
+}
+
+def stateCheck() {
+	sendHubCommand(new physicalgraph.device.HubAction(secure(zwave.doorLockV1.doorLockOperationGet())))
 }
 
 def refresh() {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -29,7 +29,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Portable Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC"
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2014-07-15
  */
 metadata {
-	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -22,6 +22,7 @@ metadata {
 		attribute "alarmState", "string"
 
 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
+		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
 		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
 		capability "Actuator"
 		capability "Health Check"
 		capability "Valve"
@@ -37,7 +37,7 @@ metadata {
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -45,7 +45,7 @@ metadata {
 			}
 		}
 
-		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -68,18 +68,19 @@ def updated() {
 
 def parse(String description) {
 	log.trace "parse description : $description"
-	def result = null
 	def cmd = zwave.parse(description, [0x20: 1])
 	if (cmd) {
-		result = createEvent(zwaveEvent(cmd))
+		return zwaveEvent(cmd)
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
-	return result
+	log.debug "Could not parse message"
+	return null
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
@@ -89,20 +90,22 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "productTypeId:    ${cmd.productTypeId}"
     def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
     updateDataValue("MSR", msr)
-    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
+    return createEventWithDebug([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
+    return createEventWithDebug([descriptionText: cmd.toString(), isStateChange: true, displayed: true])
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
+
+	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
+			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	[:] // Handles all Z-Wave commands we aren't interested in
+	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -138,3 +141,9 @@ def refresh() {
     }
     delayBetween(commands,100)
 }
+
+def createEventWithDebug(eventMap) {
+	def event = createEvent(eventMap)
+	log.debug "Event created with ${event?.descriptionText}"
+	return event
+}