DHF-7 Z-Wave Lock: Add scheduled checks in case ping() is missed

NVS-6

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -24,7 +24,10 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Health Check"
 
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
+
+		fingerprint mfr:"010F", prod:"0801", model:"2001"
+		fingerprint mfr:"010F", prod:"0801", model:"1001"
 	}
 
 	simulator {

devicetypes/smartthings/everspring-illuminance-sensor.src/everspring-illuminance-sensor.groovy

@@ -0,0 +1,163 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST815 Illuminance Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring Illuminance Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Illuminance Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0007", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "illuminace ${i} lux": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 3:
+			// luminance
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			map.name = "illuminance"
+			break;
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report lux change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 30).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/everspring-st814.src/everspring-st814.groovy

@@ -0,0 +1,188 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Everspring ST814 Temperature/Humidity Sensor
+ *
+ *  Author: SmartThings
+ *  Date: 2017-3-4
+ */
+
+metadata {
+	definition (name: "Everspring ST814", namespace: "smartthings", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Relative Humidity Measurement"
+		capability "Battery"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Health Check"
+
+		fingerprint mfr:"0060", prod:"0006", model:"0001"
+	}
+
+	simulator {
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "humidity ${i}%": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 5).incomingMessage()
+		}
+
+		for( int i = 0; i <= 100; i += 20 ) {
+			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
+				batteryLevel: i).incomingMessage()
+		}
+		status "wakeup":  "command: 8407, payload: "
+	}
+
+	tiles(scale: 2) {
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 32, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 98, color: "#bc2323"]
+			]
+		}
+		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
+			state "humidity", label:'${currentValue}% humidity', unit:""
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main( ["temperature", "humidity"] )
+		details( ["temperature", "humidity", "battery"] )
+	}
+}
+
+def updated() {
+	state.configured = false
+}
+
+def parse(String description) {
+	def result = []
+
+	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+
+	if (result instanceof List) {
+		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
+	} else {
+		log.debug "Parsed '$description' to ${result}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def result = [
+		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	]
+	if (state.configured) {
+		result << response(zwave.batteryV1.batteryGet())
+	} else {
+		result << response(configure())
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
+	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
+		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
+	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
+		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
+
+	def map = [:]
+	switch( cmd.sensorType ) {
+		case 1:
+			/* temperature */
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			break
+		case 5:
+			/* humidity */
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "%"
+			map.name = "humidity"
+			break
+	}
+	
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+
+	def response_cmds  = []
+	if (!currentTemperature) {
+		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
+		response_cmds << "delay 1000"
+	}
+	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+
+	return [createEvent(map), response(response_cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+	def result = null
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
+	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
+	if (encapsulatedCommand) {
+		result = zwaveEvent(encapsulatedCommand)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: ${cmd.toString()}"
+	return [:]
+}
+
+def configure() {
+	state.configured = true
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	delayBetween([
+		// Auto report time interval in minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 20).format(),
+
+		// Auto report temperature change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: 2).format(),
+
+		// Auto report humidity change threshold
+		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5).format(),
+
+		// Get battery – report triggers WakeUpNMI
+		zwave.batteryV1.batteryGet().format()
+	]) 
+}

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -47,14 +47,14 @@
 		capability 	"Sensor"
 		capability 	"Battery"
 		capability  "Health Check"
+		command "resetParams2StDefaults"
+		command "listCurrentParams"
+		command "updateZwaveParam"
+		command "test"
+		command "configure"
 
-        command		"resetParams2StDefaults"
-        command		"listCurrentParams"
-        command		"updateZwaveParam"
-        command		"test"
-        command		"configure"
-
-		fingerprint deviceId: "0x2001", inClusters: "0x30,0x84,0x85,0x80,0x8F,0x56,0x72,0x86,0x70,0x8E,0x31,0x9C,0xEF,0x30,0x31,0x9C"
+		fingerprint mfr:"010F", prod:"0800", model:"2001"
+		fingerprint mfr:"010F", prod:"0800", model:"1001"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -152,6 +152,10 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupported
 
 def zwaveEvent(DoorLockOperationReport cmd) {
 	def result = []
+
+	unschedule(followupStateCheck)
+	unschedule(stateCheck)
+
 	def map = [ name: "lock" ]
 	if (cmd.doorLockMode == 0xFF) {
 		map.value = "locked"
@@ -365,7 +369,7 @@ def zwaveEvent(UserCodeReport cmd) {
 			code = state["set$name"] ?: decrypt(state[name]) ?: "****"
 			state.remove("set$name".toString())
 		} else {
-			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
+			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ], isStateChange: true ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
 			map.isStateChange = true
@@ -456,11 +460,12 @@ def zwaveEvent(physicalgraph.zwave.commands.timev1.TimeGet cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
 	// The old Schlage locks use group 1 for basic control - we don't want that, so unsubscribe from group 1
 	def result = [ createEvent(name: "lock", value: cmd.value ? "unlocked" : "locked") ]
-	result << response(zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	if (state.assoc != zwaveHubNodeId) {
-		result << response(zwave.associationV1.associationGet(groupingIdentifier:2))
-	}
-	result
+	def cmds = [
+			zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId).format(),
+			"delay 1200",
+			zwave.associationV1.associationGet(groupingIdentifier:2).format()
+		]
+	[result, response(cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
@@ -530,11 +535,18 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
 def ping() {
-	refresh()
+	runIn(30, followupStateCheck)
+	secure(zwave.doorLockV1.doorLockOperationGet())
+}
+
+def followupStateCheck() {
+	runEvery1Hour(stateCheck)
+	stateCheck()
+}
+
+def stateCheck() {
+	sendHubCommand(new physicalgraph.device.HubAction(secure(zwave.doorLockV1.doorLockOperationGet())))
 }
 
 def refresh() {