MSA-615: Add control for the indicator light on the enerwave zw15sm switch. This is a modification to the stock metering switch device type.

devicetypes/smartthings/enerwave-zw15sm-metering-switch.src/enerwave-zw15sm-metering-switch.groovy

@@ -0,0 +1,249 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ * modified by lgkahn v1 for control of the on/off light
+ * the lite when on/off is not the normal parameter settings of the config class and there also
+ * is no never lite option.. So custom code for this device only.
+ *
+ */
+metadata {
+	definition (name: "Enerwave ZW15SM Metering Switch", namespace: "smartthings", author: "LGKahn") {
+		capability "Energy Meter"
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Polling"
+		capability "Refresh"
+		capability "Configuration"
+		capability "Sensor"
+        capability "Indicator"
+        
+      
+        
+		fingerprint inClusters: "0x25,0x32"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		for (int i = 0; i <= 10000; i += 1000) {
+			status "power  ${i} W": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 10) {
+			status "energy  ${i} kWh": new physicalgraph.zwave.Zwave().meterV1.meterReport(
+				scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
+		}
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+
+	}
+
+	// tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+		}
+		valueTile("power", "device.power") {
+			state "default", label:'${currentValue} W'
+		}
+		valueTile("energy", "device.energy") {
+			state "default", label:'${currentValue} kWh'
+		}
+		standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'reset kWh', action:"reset"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		standardTile("indicatorStatus", "device.indicatorStatus", width: 1, height: 1, inactiveLabel: false, decoration: "flat") {
+			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
+			state "when on", action:"indicator.indicatorWhenOff", icon:"st.indicators.lit-when-on"
+		
+		}
+		main(["switch","power","energy"])
+		details(["switch","power","energy","indicatorStatus","refresh","reset"])
+	}
+}
+
+def updated() {
+	try {
+		if (!state.MSR) {
+			response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
+		}
+	} catch (e) { log.debug e }
+}
+
+def parse(String description) {
+	def result = null
+    //log.debug "in parse desc = $description"
+    
+	if(description == "updated") return 
+	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
+	if (cmd) {
+		result = zwaveEvent(cmd)
+	}
+	return result
+}
+
+
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv1.MeterReport cmd) {
+	if (cmd.scale == 0) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
+	} else if (cmd.scale == 1) {
+		createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kVAh")
+	} else if (cmd.scale == 2) {
+		createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	def evt = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "physical")
+	if (evt.isStateChange) {
+		[evt, response(["delay 3000", zwave.meterV2.meterGet(scale: 2).format()])]
+	} else {
+		evt
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+
+   // log.debug "in config report  got indicatorstatus = $state.currentIndicatorStatus"	
+	[name: "indicatorStatus", value: state.currentIndicatorStatus, display: true]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	// retypeBasedOnMSR()
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr.startsWith("0086") && !state.aeonconfig) {  // Aeon Labs meter
+		state.aeonconfig = 1
+		result << response(delayBetween([
+			zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 4).format(),   // report power in watts
+			zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 8).format(),   // report energy in kWh
+			zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.configurationV1.configurationSet(parameterNumber: 103, size: 4, scaledConfigurationValue: 0).format(),    // no third report
+			//zwave.configurationV1.configurationSet(parameterNumber: 113, size: 4, scaledConfigurationValue: 300).format(), // every 5 min
+			zwave.meterV2.meterGet(scale: 0).format(),
+			zwave.meterV2.meterGet(scale: 2).format(),
+		]))
+	} else {
+		result << response(delayBetween([
+			zwave.meterV2.meterGet(scale: 0).format(),
+			zwave.meterV2.meterGet(scale: 2).format(),
+		]))
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "$device.displayName: Unhandled: $cmd"
+	[:]
+}
+
+def on() {
+
+log.debug "in on"
+	[
+    
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		"delay 3000",
+		zwave.meterV2.meterGet(scale: 2).format()
+	]
+}
+
+def off() {
+log.debug "in off"
+	[
+    	zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		"delay 3000",
+		zwave.meterV2.meterGet(scale: 2).format()
+	]
+}
+
+def poll() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def refresh() {
+	def value = "when off"
+   
+    log.debug "in refresh for whenon got indicatorstatus = $state.currentIndicatorStatus"
+    sendEvent(name: "indicatorStatus", value: state.currentIndicatorStatus, display: true)
+	
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.meterV2.meterGet(scale: 0).format(),
+		zwave.meterV2.meterGet(scale: 2).format()
+	])
+}
+
+def configure() {
+	zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+}
+
+def reset() {
+			 state.currentIndicatorStatus = "when on"
+	return [
+		zwave.meterV2.meterReset().format(),
+		zwave.meterV2.meterGet(scale: 0).format()
+	]
+}
+
+
+
+
+def indicatorWhenOn() {
+log.debug "in when on"
+ state.currentIndicatorStatus = "when on"
+	sendEvent(name: "indicatorStatus", value: "when on", display: true)
+zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 1, scaledConfigurationValue: 1).format()
+	}
+
+def indicatorWhenOff() {
+log.debug "in when off"
+ state.currentIndicatorStatus = "when off"
+	sendEvent(name: "indicatorStatus", value: "when off", display: true)	  
+zwave.configurationV1.configurationSet(parameterNumber: 0x01, size: 1, scaledConfigurationValue: 0).format()
+	}
+
+
+