MSA-1986: SmartThingsToStart

devicetypes/erocm123/inovelli-2-channel-smart-plug.src/inovelli-2-channel-smart-plug.groovy

@@ -1,268 +0,0 @@
-/**
- *
- *  Inovelli 2-Channel Smart Plug
- *
- *  github: Eric Maycock (erocm123)
- *  Date: 2017-04-27
- *  Copyright Eric Maycock
- *
- *  Includes all configuration parameters and ease of advanced configuration.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition(name: "Inovelli 2-Channel Smart Plug", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Actuator"
-		capability "Sensor"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Health Check"
-
-		fingerprint manufacturer: "015D", prod: "0221", model: "251C", deviceJoinName: "Show Home 2-Channel Smart Plug"
-		fingerprint manufacturer: "0312", prod: "B221", model: "251C", deviceJoinName: "Inovelli 2-Channel Smart Plug"
-	}
-	simulator {}
-	preferences {}
-	tiles {
-		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
-		}
-		main(["switch"])
-		details(["switch",
-				 childDeviceTiles("all"), "refresh"
-		])
-	}
-}
-def parse(String description) {
-	def result = []
-	def cmd = zwave.parse(description)
-	if (cmd) {
-		result += zwaveEvent(cmd)
-		logging("Parsed ${cmd} to ${result.inspect()}", 1)
-	} else {
-		logging("Non-parsed event: ${description}", 2)
-	}
-	return result
-}
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
-	logging("BasicReport ${cmd} - ep ${ep}", 2)
-	if (ep) {
-		def event
-		childDevices.each {
-			childDevice ->
-				if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
-					childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
-				}
-		}
-		if (cmd.value) {
-			event = [createEvent([name: "switch", value: "on"])]
-		} else {
-			def allOff = true
-			childDevices.each {
-				n ->
-					if (n.currentState("switch").value != "off") allOff = false
-			}
-			if (allOff) {
-				event = [createEvent([name: "switch", value: "off"])]
-			} else {
-				event = [createEvent([name: "switch", value: "on"])]
-			}
-		}
-		return event
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	logging("BasicSet ${cmd}", 2)
-	def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
-	def cmds = []
-	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
-	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	return [result, response(commands(cmds))] // returns the result of reponse()
-}
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
-	logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
-	if (ep) {
-		def event
-		def childDevice = childDevices.find {
-			it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
-		}
-		if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
-		if (cmd.value) {
-			event = [createEvent([name: "switch", value: "on"])]
-		} else {
-			def allOff = true
-			childDevices.each {
-				n->
-					if (n.currentState("switch").value != "off") allOff = false
-			}
-			if (allOff) {
-				event = [createEvent([name: "switch", value: "off"])]
-			} else {
-				event = [createEvent([name: "switch", value: "on"])]
-			}
-		}
-		return event
-	} else {
-		def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
-		def cmds = []
-		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
-		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-		return [result, response(commands(cmds))] // returns the result of reponse()
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
-	logging("MultiChannelCmdEncap ${cmd}", 2)
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	logging("ManufacturerSpecificReport ${cmd}", 2)
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	logging("msr: $msr", 2)
-	updateDataValue("MSR", msr)
-}
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// This will capture any commands not handled by other instances of zwaveEvent
-	// and is recommended for development so you can see every command the device sends
-	logging("Unhandled Event: ${cmd}", 2)
-}
-def on() {
-	logging("on()", 1)
-	commands([
-			zwave.switchAllV1.switchAllOn(),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	])
-}
-def off() {
-	logging("off()", 1)
-	commands([
-			zwave.switchAllV1.switchAllOff(),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	])
-}
-void childOn(String dni) {
-	logging("childOn($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-void childOff(String dni) {
-	logging("childOff($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-void childRefresh(String dni) {
-	logging("childRefresh($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-def poll() {
-	logging("poll()", 1)
-	commands([
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
-	])
-}
-def refresh() {
-	logging("refresh()", 1)
-	commands([
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
-	])
-}
-def ping() {
-	logging("ping()", 1)
-	refresh()
-}
-def installed() {
-	logging("installed()", 1)
-	command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
-	createChildDevices()
-}
-def updated() {
-	logging("updated()", 1)
-	if (!childDevices) {
-		createChildDevices()
-	} else if (device.label != state.oldLabel) {
-		childDevices.each {
-			if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
-				def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
-				it.setLabel(newLabel)
-			}
-		}
-		state.oldLabel = device.label
-	}
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
-}
-def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
-	logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
-}
-private encap(cmd, endpoint) {
-	if (endpoint) {
-		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
-	} else {
-		cmd
-	}
-}
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
-	}
-}
-private commands(commands, delay = 1000) {
-	delayBetween(commands.collect {
-		command(it)
-	}, delay)
-}
-private channelNumber(String dni) {
-	dni.split("-ep")[-1] as Integer
-}
-private void createChildDevices() {
-	state.oldLabel = device.label
-	for (i in 1..2) {
-		addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
-																						 isComponent: true, componentName: "ep$i", componentLabel: "Channel $i"
-		])
-	}
-}
-
-private def logging(message, level) {
-	if (logLevel != "0") {
-		switch (logLevel) {
-			case "1":
-				if (level > 1) log.debug "$message"
-				break
-			case "99":
-				log.debug "$message"
-				break
-		}
-	}
-}

devicetypes/erocm123/switch-child-device.src/switch-child-device.groovy

@@ -1,49 +0,0 @@
-/**
- *  Switch Child Device
- *
- *  Copyright 2017 Eric Maycock
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Switch Child Device", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Switch"
-		capability "Actuator"
-		capability "Sensor"
-		capability "Refresh"
-	}
-
-	tiles {
-		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-	}
-}
-
-void on() {
-	parent.childOn(device.deviceNetworkId)
-}
-
-void off() {
-	parent.childOff(device.deviceNetworkId)
-}
-
-void refresh() {
-	parent.childRefresh(device.deviceNetworkId)
-}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -39,8 +39,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
 			}
         }
 

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -37,8 +37,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
 			}
         }
 

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Battery"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
-		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
 	}
 
 	simulator {
@@ -131,12 +130,5 @@ def updated() {
 }
 
 def initialize() {
-	def zwMap = getZwaveInfo()
-	def buttons = 4 // Default for Key Fob
-
-	// Only one button for Aeon Panic Button
-	if (zwMap && zwMap.mfr == "0086" && zwMap.prod == "0001" && zwMap.model == "0026") {
-		buttons = 1
-	}
-	sendEvent(name: "numberOfButtons", value: buttons)
+	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/aeon-multisensor-6.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -1,43 +0,0 @@
-# Aeon Multisensor 6
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs MultiSensor 6](https://www.smartthings.com/products/aeon-labs-multisensor-6)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Ultraviolet Index** - gives the ability to get the ultraviolet index from devices that report it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs MultiSensor 6 is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs MultiSensor 6 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226)

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -30,7 +29,6 @@ metadata {
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
-		fingerprint mfr:"0086", prod:"0102", model:"0064", deviceJoinName: "Aeon Labs MultiSensor 6"
 	}
 
 	simulator {
@@ -129,14 +127,7 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 
@@ -335,13 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -22,6 +22,8 @@ metadata {
 		capability "Battery"
 		capability "Health Check"
 
+		command "configureAfterSecure"
+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
@@ -89,12 +91,12 @@ metadata {
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "configure", label:'', action:"configure", icon:"st.secondary.configure"
+        standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
 		}
 
 		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery", "configure"])
+		details(["motion", "temperature", "humidity", "illuminance", "battery", "configureAfterSecure"])
 	}
 }
 
@@ -129,8 +131,8 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		log.debug("not sending wakeUpNoMoreInformation yet: late configure")
-		result += response(configure())
+		log.debug("not sending wakeUpNoMoreInformation yet")
+        result += response(configureAfterSecure())
 	} else {
 		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
@@ -148,6 +150,11 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 	}
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
+    // log.debug "Received SecurityCommandsSupportedReport"
+	response(configureAfterSecure())
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -219,6 +226,36 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
+def configureAfterSecure() {
+    // log.debug "configureAfterSecure()"
+
+    def request = [
+		// send temperature, humidity, and illuminance every 8 minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32),
+		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
+
+		// send battery every 20 hours
+		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1),
+		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60),
+
+		// send no-motion report 60 seconds after motion stops
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60),
+
+		// send binary sensor report instead of basic set for motion
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2),
+
+		// disable notification-style motion events
+		zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0),
+
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType:0x0C)
+    ]
+	
+    setConfigured()
+	
+    secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+}
+
 /**
  * PING is used by Device-Watch in attempt to reach the Device
  * */
@@ -228,36 +265,7 @@ def ping() {
 
 def configure() {
 	// log.debug "configure()"
-	def request = []
-	// send temperature, humidity, and illuminance every 8 minutes
-	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60)
-
-	// send battery every 20 hours
-	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60)
-
-	// send no-motion report 60 seconds after motion stops
-	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60)
-
-	// send binary sensor report instead of basic set for motion
-	request << zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2)
-
-	// Turn on the Multisensor Gen5 PIR sensor
-	request << zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: 1)
-
-	// disable notification-style motion events
-	request << zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0)
-
-	request << zwave.batteryV1.batteryGet()
-	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
-
-	setConfigured()
-
-	secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+    //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -1,48 +0,0 @@
-# Aeon Multisensor
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec MultiSensor (DSB05-ZWUS)](https://www.smartthings.com/products/aeotec-multisensor-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Aeon Labs MultiSensor is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Battery Specification
-
-Four AAA batteries are required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon MultiSensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-How-to-connect-Aeon-Labs-MultiSensors)

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -94,16 +93,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 // Parse incoming device messages to generate events
 def parse(String description)
 {
@@ -190,13 +179,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	[:]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	delayBetween([
 		// send binary sensor report instead of basic set for motion

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,7 +16,7 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
@@ -61,8 +61,6 @@ metadata {
 def installed() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(secure(zwave.basicV1.basicGet()))
 }
 
 def updated() {
@@ -165,4 +163,4 @@ private secure(physicalgraph.zwave.Command cmd) {
  * */
 def ping() {
 	secure(zwave.basicV1.basicGet())
-}
+}

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch
  *

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -9,7 +9,6 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"
 
@@ -19,7 +18,6 @@ metadata {
 		command "quickSetHeat"
 
 		fingerprint deviceId: "0x08", inClusters: "0x43,0x40,0x44,0x31,0x80,0x85,0x60"
-		fingerprint mfr:"0098", prod:"6401", model:"0107", deviceJoinName: "2Gig CT100 Programmable Thermostat"
 	}
 
 	// simulator metadata
@@ -108,16 +106,6 @@ metadata {
 	}
 }
 
-def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description)
 {
 	def result = []
@@ -451,14 +439,6 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	log.debug "ping() called"
-	refresh()
-}
-
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -108,20 +108,11 @@ def updated(){
     }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -188,16 +179,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/everspring-illuminance-sensor.src/everspring-illuminance-sensor.groovy

@@ -1,163 +0,0 @@
-/**
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Everspring ST815 Illuminance Sensor
- *
- *  Author: SmartThings
- *  Date: 2017-3-4
- */
-
-metadata {
-	definition (name: "Everspring Illuminance Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Illuminance Measurement"
-		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Health Check"
-
-		fingerprint mfr:"0060", prod:"0007", model:"0001"
-	}
-
-	simulator {
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "illuminace ${i} lux": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 0, sensorType: 3, scale: 1).incomingMessage()
-		}
-
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
-				batteryLevel: i).incomingMessage()
-		}
-
-		status "wakeup":  "command: 8407, payload: "
-	}
-
-	tiles(scale: 2) {
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 32, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 98, color: "#bc2323"]
-			]
-		}
-		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label:'${currentValue}% humidity', unit:""
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main( ["temperature", "humidity"] )
-		details( ["temperature", "humidity", "battery"] )
-	}
-}
-
-def updated() {
-	state.configured = false
-}
-
-def parse(String description) {
-	def result = []
-
-	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
-
-	if (cmd) {
-		result = zwaveEvent(cmd)
-	}
-
-	if (result instanceof List) {
-		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
-	} else {
-		log.debug "Parsed '$description' to ${result}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def result = [
-		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	]
-	if (state.configured) {
-		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(configure())
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
-	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
-		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
-	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
-		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
-
-	def map = [:]
-	switch( cmd.sensorType ) {
-		case 3:
-			// luminance
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "lux"
-			map.name = "illuminance"
-			break;
-	}
-	
-	return createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-
-	def response_cmds  = []
-	if (!currentTemperature) {
-		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
-		response_cmds << "delay 1000"
-	}
-	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-
-	return [createEvent(map), response(response_cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "Unhandled: ${cmd.toString()}"
-	return [:]
-}
-
-def configure() {
-	state.configured = true
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	delayBetween([
-		// Auto report time interval in minutes
-		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 2, scaledConfigurationValue: 20).format(),
-
-		// Auto report lux change threshold
-		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 30).format(),
-
-		// Get battery – report triggers WakeUpNMI
-		zwave.batteryV1.batteryGet().format()
-	]) 
-}

devicetypes/smartthings/everspring-st814.src/everspring-st814.groovy

@@ -1,188 +0,0 @@
-/**
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Everspring ST814 Temperature/Humidity Sensor
- *
- *  Author: SmartThings
- *  Date: 2017-3-4
- */
-
-metadata {
-	definition (name: "Everspring ST814", namespace: "smartthings", author: "SmartThings") {
-		capability "Temperature Measurement"
-		capability "Relative Humidity Measurement"
-		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Health Check"
-
-		fingerprint mfr:"0060", prod:"0006", model:"0001"
-	}
-
-	simulator {
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
-		}
-
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "humidity ${i}%": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 0, sensorType: 5).incomingMessage()
-		}
-
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
-				batteryLevel: i).incomingMessage()
-		}
-		status "wakeup":  "command: 8407, payload: "
-	}
-
-	tiles(scale: 2) {
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 32, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 98, color: "#bc2323"]
-			]
-		}
-		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label:'${currentValue}% humidity', unit:""
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main( ["temperature", "humidity"] )
-		details( ["temperature", "humidity", "battery"] )
-	}
-}
-
-def updated() {
-	state.configured = false
-}
-
-def parse(String description) {
-	def result = []
-
-	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
-
-	if (cmd) {
-		result = zwaveEvent(cmd)
-	}
-
-	if (result instanceof List) {
-		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
-	} else {
-		log.debug "Parsed '$description' to ${result}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def result = [
-		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	]
-	if (state.configured) {
-		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(configure())
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
-	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
-		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
-	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
-		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
-
-	def map = [:]
-	switch( cmd.sensorType ) {
-		case 1:
-			/* temperature */
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			map.name = "temperature"
-			break
-		case 5:
-			/* humidity */
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "%"
-			map.name = "humidity"
-			break
-	}
-	
-	return createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-
-	def response_cmds  = []
-	if (!currentTemperature) {
-		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
-		response_cmds << "delay 1000"
-	}
-	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-
-	return [createEvent(map), response(response_cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
-	def result = null
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
-	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
-	if (encapsulatedCommand) {
-		result = zwaveEvent(encapsulatedCommand)
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "Unhandled: ${cmd.toString()}"
-	return [:]
-}
-
-def configure() {
-	state.configured = true
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	delayBetween([
-		// Auto report time interval in minutes
-		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 20).format(),
-
-		// Auto report temperature change threshold
-		zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: 2).format(),
-
-		// Auto report humidity change threshold
-		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5).format(),
-
-		// Get battery – report triggers WakeUpNMI
-		zwave.batteryV1.batteryGet().format()
-	]) 
-}

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -107,8 +107,8 @@
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
         standardTile("acceleration", "device.acceleration") {
-			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
-			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 
 

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -12,13 +12,13 @@
  *
  */
 metadata {
-	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
+	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
-
+        
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
 		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
@@ -34,30 +34,25 @@ metadata {
 	}
 
 	// tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
-				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-			}
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
+			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
 		}
-
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "valve"
-		details(["valve","refresh"])
+		main "contact"
+		details(["contact","refresh"])
 	}
 }
 
 def installed(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(refresh())
 }
 
 def updated(){
@@ -67,37 +62,30 @@ def updated(){
 
 def parse(String description) {
 	log.trace description
+	def result = null
 	def cmd = zwave.parse(description)
 	if (cmd) {
-		return zwaveEvent(cmd)
+		result = createEvent(zwaveEvent(cmd))
 	}
-	log.debug "Could not parse message"
-	return null
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value ? "closed" : "open"
-
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
+	[:] // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format()
 }
 
 def close() {
-	delayBetween([
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
 }
 
 /**
@@ -110,9 +98,3 @@ def ping() {
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
-
-def createEventWithDebug(eventMap) {
-	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.name}:${event?.value} - ${event?.descriptionText}"
-	return event
-}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bloom
  *

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bridge
  *

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Bulb
  *

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Lux Bulb
  *

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue White Ambiance Bulb
  *

devicetypes/smartthings/smartalert-siren.src/smartalert-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-05
  */
 metadata {
-	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+	definition (name: "SmartAlert Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.smokedetector") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Sensor"

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3200-Sgb", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "4257050-RZHAC", deviceJoinName: "Outlet"
-		fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
 		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
 	}
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -61,8 +61,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#00A0DC"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#cccccc"
+				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
+				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -87,8 +87,8 @@ metadata {
 			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#00a0dc")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#cccccc")
+			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
+			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label: '${currentValue}°',
@@ -178,7 +178,7 @@ private List<Map> handleAcceleration(descMap) {
 			result += parseAxis(descMap.additionalAttrs)
 		}
 	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs ?: []
+		def addAttrs = descMap.additionalAttrs
 		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
 		result += parseAxis(addAttrs)
 	}

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -49,6 +49,6 @@ def arrived() {
 
 
 def departed() {
-	log.trace "Executing 'departed'"
+	log.trace "Executing 'arrived'"
 	sendEvent(name: "presence", value: "not present")
 }

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *
@@ -48,8 +46,8 @@
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
       		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -66,29 +66,22 @@ def parse(String description) {
         else {
             sendEvent(event)
         }
-    } else {
-        def descMap = zigbee.parseDescriptionAsMap(description)
-        if (descMap && descMap.clusterInt == 0x0006 && descMap.commandInt == 0x07) {
-            if (descMap.data[0] == "00") {
+    }
+    else {
+        def cluster = zigbee.parse(description)
+
+        if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
+            if (cluster.data[0] == 0x00) {
                 log.debug "ON/OFF REPORTING CONFIG RESPONSE: " + cluster
                 sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-            } else {
+            }
+            else {
                 log.warn "ON/OFF REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
             }
-        } else if (device.getDataValue("manufacturer") == "sengled" && descMap && descMap.clusterInt == 0x0008 && descMap.attrInt == 0x0000) {
-            // This is being done because the sengled element touch/classic incorrectly uses the value 0xFF for the max level.
-            // Per the ZCL spec for the UINT8 data type 0xFF is an invalid value, and 0xFE should be the max.  Here we
-            // manually handle the invalid attribute value since it will be ignored by getEvent as an invalid value.
-            // We also set the level of the bulb to 0xFE so future level reports will be 0xFE until it is changed by
-            // something else.
-            if (descMap.value.toUpperCase() == "FF") {
-                descMap.value = "FE"
-            }
-            sendHubCommand(zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, "FE0000").collect { new physicalgraph.device.HubAction(it) }, 0)
-            sendEvent(zigbee.getEventFromAttrData(descMap.clusterInt, descMap.attrInt, descMap.encoding, descMap.value))
-        } else {
+        }
+        else {
             log.warn "DID NOT PARSE MESSAGE for description : $description"
-            log.debug "${descMap}"
+            log.debug "${cluster}"
         }
     }
 }

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -34,7 +34,7 @@ import physicalgraph.zigbee.zcl.DataType
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
 	}
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -103,12 +103,12 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                state.hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
-                runIn(5, updateColor, [overwrite: true])
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                state.saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
-                runIn(5, updateColor, [overwrite: true])
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
+                sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
         else if (cluster && cluster.clusterId == 0x0006 && cluster.command == 0x07) {
@@ -127,11 +127,6 @@ def parse(String description) {
     }
 }
 
-def updateColor() {
-	sendEvent(name: "hue", value: state.hueValue, descriptionText: "Color has changed")
-	sendEvent(name: "saturation", value: state.saturationValue, descriptionText: "Color has changed", displayed: false)
-}
-
 def on() {
     zigbee.on()
 }
@@ -209,9 +204,9 @@ def setColor(value){
     log.trace "setColor($value)"
     zigbee.on() +
     zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
-    getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
-    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -27,6 +27,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles(scale: 2) {
         multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -83,9 +83,6 @@ def parse(String description) {
             }
         }
         sendEvent(event)
-        //handle valve attribute
-        event.name = "valve"
-        sendEvent(event)
     }
     else {
         def descMap = zigbee.parseDescriptionAsMap(description)

devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy

@@ -75,10 +75,6 @@ def parse(String description) {
 	return result
 }
 
-def uninstalled() {
-	sendEvent(name: "epEvent", value: "delete all", isStateChange: true, displayed: false, descriptionText: "Delete endpoint devices")
-}
-
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	[ createEvent(descriptionText: "${device.displayName} woke up", isStateChange:true),
 	  response(["delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]) ]

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -88,20 +88,11 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -168,16 +159,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,15 +30,9 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
-		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
-		fingerprint mfr:"0086", prod:"0102", model:"0059", deviceJoinName: "Aeon Labs Recessed Door Sensor"
 		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
-		fingerprint mfr:"014A", prod:"0001", model:"0003", deviceJoinName: "Ecolink Tilt Sensor"
+		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
 		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
-		fingerprint mfr:"014F", prod:"2001", model:"0102", deviceJoinName: "Nortek GoControl Door/Window Sensor"
-		fingerprint mfr:"0063", prod:"4953", model:"3031", deviceJoinName: "Jasco Hinge Pin Door Sensor"
-		fingerprint mfr:"019A", prod:"0003", model:"0003", deviceJoinName: "Sensative Strips"
-
 	}
 
 	// simulator metadata
@@ -113,9 +107,9 @@ def updated() {
 
 def configure() {
 	commands([
-		zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW),
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-	], 1000)
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
+	], 6000)
 }
 
 def sensorValueEvent(value) {
@@ -190,17 +184,11 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
-
-	if (device.currentValue("contact") == null) { // Incase our initial request didn't make it
-		cmds << command(zwave.sensorBinaryV2.sensorBinaryGet(sensorType: zwave.sensorBinaryV2.SENSOR_TYPE_DOOR_WINDOW))
-	}
-
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
 		cmds << command(zwave.batteryV1.batteryGet())
-	} else { // If we check the battery state we will send NoMoreInfo in the handler for BatteryReport so that we definitely get the report
+	} else {
 		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 	}
-
 	[event, response(cmds)]
 }
 

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -26,24 +26,7 @@ metadata {
 
 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
-		fingerprint mfr:"0090", prod:"0001", model:"0236", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"0238", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0001", model:"0001", deviceJoinName: "KwikSet SmartCode 910 Contemporary Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"0339", deviceJoinName: "KwikSet SmartCode 912 Lever Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"4006", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock" //backlit version
-		fingerprint mfr:"0090", prod:"0003", model:"0440", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0001", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"003B", prod:"6341", model:"0544", deviceJoinName: "Schlage Camelot Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"003B", prod:"6341", model:"5044", deviceJoinName: "Schlage Century Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"003B", prod:"634B", model:"504C", deviceJoinName: "Schlage Connected Keypad Lever Door Lock"
-		fingerprint mfr:"0129", prod:"0002", model:"0800", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD120
-		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD220, YRD240
-		fingerprint mfr:"0129", prod:"0002", model:"FFFF", deviceJoinName: "Yale Touchscreen Lever Door Lock" // YRD220
-		fingerprint mfr:"0129", prod:"0004", model:"0800", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD110
-		fingerprint mfr:"0129", prod:"0004", model:"0000", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD210
-		fingerprint mfr:"0129", prod:"0001", model:"0000", deviceJoinName: "Yale Push Button Lever Door Lock" // YRD210
-		fingerprint mfr:"0129", prod:"8002", model:"0600", deviceJoinName: "Yale Assure Lock with Bluetooth"
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
 	}
 
 	simulator {
@@ -86,13 +69,13 @@ import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
 def installed() {
-	// Device-Watch pings if no device events received for 1 hour (checkInterval)
-	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-	// Device-Watch pings if no device events received for 1 hour (checkInterval)
-	sendEvent(name: "checkInterval", value: 1 * 60 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	try {
 		if (!state.init) {
 			state.init = true
@@ -152,10 +135,6 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupported
 
 def zwaveEvent(DoorLockOperationReport cmd) {
 	def result = []
-
-	unschedule("followupStateCheck")
-	unschedule("stateCheck")
-
 	def map = [ name: "lock" ]
 	if (cmd.doorLockMode == 0xFF) {
 		map.value = "locked"
@@ -369,7 +348,7 @@ def zwaveEvent(UserCodeReport cmd) {
 			code = state["set$name"] ?: decrypt(state[name]) ?: "****"
 			state.remove("set$name".toString())
 		} else {
-			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ], isStateChange: true ]
+			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
 			map.isStateChange = true
@@ -460,12 +439,11 @@ def zwaveEvent(physicalgraph.zwave.commands.timev1.TimeGet cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
 	// The old Schlage locks use group 1 for basic control - we don't want that, so unsubscribe from group 1
 	def result = [ createEvent(name: "lock", value: cmd.value ? "unlocked" : "locked") ]
-	def cmds = [
-			zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId).format(),
-			"delay 1200",
-			zwave.associationV1.associationGet(groupingIdentifier:2).format()
-	]
-	[result, response(cmds)]
+	result << response(zwave.associationV1.associationRemove(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+	if (state.assoc != zwaveHubNodeId) {
+		result << response(zwave.associationV1.associationGet(groupingIdentifier:2))
+	}
+	result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
@@ -535,18 +513,11 @@ def unlockwtimeout() {
 	lockAndCheck(DoorLockOperationSet.DOOR_LOCK_MODE_DOOR_UNSECURED_WITH_TIMEOUT)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
 def ping() {
-	runIn(30, followupStateCheck)
-	secure(zwave.doorLockV1.doorLockOperationGet())
-}
-
-def followupStateCheck() {
-	runEvery1Hour(stateCheck)
-	stateCheck()
-}
-
-def stateCheck() {
-	sendHubCommand(new physicalgraph.device.HubAction(secure(zwave.doorLockV1.doorLockOperationGet())))
+	refresh()
 }
 
 def refresh() {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -85,21 +85,11 @@ metadata {
 	details(["switch", "power", "energy", "levelSliderControl", "refresh", "reset"])
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 3,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-		0x32: 3,  // Meter
-	]
-}
-
 // parse events into attributes
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 3, 0x70: 1, 0x32:3])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 	        log.debug("'$description' parsed to $result")
@@ -134,21 +124,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelR
 	dimmerEvents(cmd)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
 def dimmerEvents(physicalgraph.zwave.Command cmd) {
 	def result = []
 	def value = (cmd.value ? "on" : "off")

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -89,19 +89,10 @@ def updated() {
 	} catch (e) { log.debug e }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x32: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x72: 2,  // ManufacturerSpecific
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if(description == "updated") return
-	def cmd = zwave.parse(description, commandClassVersions)
+	def cmd = zwave.parse(description, [0x20: 1, 0x32: 1, 0x72: 2])
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
@@ -166,16 +157,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	result
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	log.debug "$device.displayName: Unhandled: $cmd"
 	[:]

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -29,7 +29,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Portable Smart Motion Sensor"
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -16,7 +16,7 @@
  *  Date: 2014-07-15
  */
 metadata {
-	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+	definition (name: "Z-Wave Siren", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -22,7 +22,6 @@ metadata {
 		attribute "alarmState", "string"
 
 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
-		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
 		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -71,17 +71,9 @@ def updated(){
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, commandClassVersions)
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -128,15 +120,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -89,17 +89,9 @@ def updated(){
     }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
-	def cmd = zwave.parse(description, commandClassVersions)
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
 	if (cmd) {
 		result = createEvent(zwaveEvent(cmd))
 	}
@@ -146,16 +138,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in

devicetypes/smartthings/zwave-water-valve.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-water-valve.src/README.md

@@ -1,38 +0,0 @@
-# Z-Wave Water Valve
-
-Cloud Execution
-
-Works with: 
-
-* [Leak Intelligence Leak Gopher Water Shutoff Valve](https://www.smartthings.com/works-with-smartthings/other/leak-intelligence-leak-gopher-water-shutoff-valve)
-
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Valve** - allows for the control of a valve device
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE`
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leak Intelligence Leak Gopher Water Shutoff Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209631423-Leak-Gopher-Z-Wave-Valve-Control)
-
-

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -12,16 +12,14 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
 		capability "Valve"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x1006", inClusters: "0x25"
-		fingerprint mfr:"0173", prod:"0003", model:"0002", deviceJoinName: "Leak Intelligence Leak Gopher Water Shutoff Valve"
 	}
 
 	// simulator metadata
@@ -37,7 +35,7 @@ metadata {
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -45,7 +43,7 @@ metadata {
 			}
 		}
 
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -55,32 +53,24 @@ metadata {
 
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response(refresh())
 }
 
 def parse(String description) {
 	log.trace "parse description : $description"
+	def result = null
 	def cmd = zwave.parse(description, [0x20: 1])
 	if (cmd) {
-		return zwaveEvent(cmd)
+		result = createEvent(zwaveEvent(cmd))
 	}
-	log.debug "Could not parse message"
-	return null
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
+    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
@@ -90,22 +80,20 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "productTypeId:    ${cmd.productTypeId}"
     def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
     updateDataValue("MSR", msr)
-    return createEventWithDebug([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-    return createEventWithDebug([descriptionText: cmd.toString(), isStateChange: true, displayed: true])
+    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
+	[:] // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -126,13 +114,6 @@ def poll() {
     zwave.switchBinaryV1.switchBinaryGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
     log.debug "refresh() is called"
     def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]
@@ -141,9 +122,3 @@ def refresh() {
     }
     delayBetween(commands,100)
 }
-
-def createEventWithDebug(eventMap) {
-	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.descriptionText}"
-	return event
-}

smartapps/smartthings/bose-soundtouch-connect.src/bose-soundtouch-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch (Connect)
  *

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Hue Service Manager
  *
@@ -1085,6 +1083,7 @@ def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
 	updateInProgress()
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
 	return "Bulb is turning On"
 }
@@ -1093,6 +1092,7 @@ def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
 	updateInProgress()
+	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
 	return "Bulb is turning Off"
 }
@@ -1108,6 +1108,8 @@ def setLevel(childDevice, percent) {
 	else
 		level = Math.min(Math.round(percent * 254 / 100), 254)
 
+	createSwitchEvent(childDevice, level > 0, percent)
+
 	// For Zigbee lights, if level is set to 0 ST just turns them off without changing level
 	// that means that the light will still be on when on is called next time
 	// Lets emulate that here
@@ -1126,6 +1128,7 @@ def setSaturation(childDevice, percent) {
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
 	// TODO should this be done by app only or should we default to on?
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [sat: level, on: true])
 	return "Setting saturation to $percent"
 }
@@ -1137,6 +1140,7 @@ def setHue(childDevice, percent) {
 	// 0 - 65535
 	def level = Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [hue: level, on: true])
 	return "Setting hue to $percent"
 }
@@ -1147,6 +1151,7 @@ def setColorTemperature(childDevice, huesettings) {
 	updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000 / huesettings)
+	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $ct"
 }
@@ -1205,6 +1210,7 @@ def setColor(childDevice, huesettings) {
 	if (huesettings.switch == "off")
 		value.on = false
 
+	createSwitchEvent(childDevice, value.on ? "on" : "off")
 	put("lights/$id/state", value)
 	return "Setting color to $value"
 }
@@ -1316,6 +1322,32 @@ private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
 }
 
+/**
+ * Sends appropriate turningOn/turningOff state events depending on switch or level changes.
+ *
+ * @param childDevice device to send event for
+ * @param setSwitch The new switch state, "on" or "off"
+ * @param setLevel Optional, switchLevel between 0-100, used if you set level to 0 for example since
+ * 				  that should generate "off" instead of level change
+ */
+private void createSwitchEvent(childDevice, setSwitch, setLevel = null) {
+
+	if (setLevel == null) {
+		setLevel = childDevice.device?.currentValue("level")
+	}
+	// Create on, off, turningOn or turningOff event as necessary
+	def currentState = childDevice.device?.currentValue("switch")
+	if ((currentState == "off" || currentState == "turningOff")) {
+		if (setSwitch == "on" || setLevel > 0) {
+			childDevice.sendEvent(name: "switch", value: "turningOn", displayed: false)
+		}
+	} else if ((currentState == "on" || currentState == "turningOn")) {
+		if (setSwitch == "off" || setLevel == 0) {
+			childDevice.sendEvent(name: "switch", value: "turningOff", displayed: false)
+		}
+	}
+}
+
 /**
  * Return the supported color range for different Hue lights. If model is not specified
  * it defaults to the smallest Gamut (B) to ensure that colors set on a mix of devices

smartapps/smartthings/json-complete-api.src/json-complete-api.groovy

@@ -1,447 +0,0 @@
-/**
- *  JSON Complete API
- *
- *  Copyright 2017 Paul Lovelace
- *
- */
-definition(
-    name: "JSON Complete API",
-    namespace: "smartthings",
-    author: "Ashok Malhotra",
-    description: "API for JSON with complete set of devices",
-    category: "SmartThings Labs",
-    iconUrl:   "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%401.png",
-    iconX2Url: "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%402.png",
-    iconX3Url: "https://raw.githubusercontent.com/pdlove/homebridge-smartthings/master/smartapps/JSON%403.png",
-    oauth: true)
-
-
-preferences {
-    page(name: "copyConfig")
-}
-
-//When adding device groups, need to add here
-def copyConfig() {
-    if (!state.accessToken) {
-        createAccessToken()
-    }
-    dynamicPage(name: "copyConfig", title: "Configure Devices", install:true, uninstall:true) {
-        section("Select devices to include in the /devices API call") {
-            paragraph "Version 0.5.5"
-            input "deviceList", "capability.refresh", title: "Most Devices", multiple: true, required: false
-            input "sensorList", "capability.sensor", title: "Sensor Devices", multiple: true, required: false
-            input "switchList", "capability.switch", title: "All Switches", multiple: true, required: false
-            //paragraph "Devices Selected: ${deviceList ? deviceList?.size() : 0}\nSensors Selected: ${sensorList ? sensorList?.size() : 0}\nSwitches Selected: ${switchList ? switchList?.size() : 0}"
-        }
-        section("Configure Pubnub") {
-            input "pubnubSubscribeKey", "text", title: "PubNub Subscription Key", multiple: false, required: false
-            input "pubnubPublishKey", "text", title: "PubNub Publish Key", multiple: false, required: false
-            input "subChannel", "text", title: "Channel (Can be anything)", multiple: false, required: false
-        }
-        section() {
-            paragraph "View this SmartApp's configuration to use it in other places."
-            href url:"${apiServerUrl("/api/smartapps/installations/${app.id}/config?access_token=${state.accessToken}")}", style:"embedded", required:false, title:"Config", description:"Tap, select, copy, then click \"Done\""
-        }
- 
-        section() {
-        	paragraph "View the JSON generated from the installed devices."
-            href url:"${apiServerUrl("/api/smartapps/installations/${app.id}/devices?access_token=${state.accessToken}")}", style:"embedded", required:false, title:"Device Results", description:"View accessories JSON"
-        }
-        section() {
-        	paragraph "Enter the name you would like shown in the smart app list"
-        	label title:"SmartApp Label (optional)", required: false 
-        }
-    }
-}
-
-def renderDevices() {
-    def deviceData = []
-        deviceList.each { 
-        	try {
-            deviceData << [name: it.displayName,
-    				basename: it.name,
-    				deviceid: it.id, 
-                    status: it.status,
-                    manufacturerName: it.getManufacturerName(),
-                    modelName: it.getModelName(),
-                    lastTime: it.getLastActivity(),
-                    capabilities: deviceCapabilityList(it), 
-                    commands: deviceCommandList(it), 
-                    attributes: deviceAttributeList(it)
-                    ]
-      		} catch (e) {
-      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
-      		}
-        }    
-        sensorList.each { 
-        	try {
-            deviceData << [name: it.displayName,
-    				basename: it.name,
-    				deviceid: it.id, 
-                    status: it.status,
-                    manufacturerName: it.getManufacturerName(),
-                    modelName: it.getModelName(),
-                    lastTime: it.getLastActivity(),
-                    capabilities: deviceCapabilityList(it), 
-                    commands: deviceCommandList(it), 
-                    attributes: deviceAttributeList(it)
-                    ]
-      		} catch (e) {
-      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
-      		}
-        }    
-        switchList.each { 
-        	try {
-            deviceData << [name: it.displayName,
-    				basename: it.name,
-    				deviceid: it.id, 
-                    status: it.status,
-                    manufacturerName: it.getManufacturerName(),
-                    modelName: it.getModelName(),
-                    lastTime: it.getLastActivity(),
-                    capabilities: deviceCapabilityList(it), 
-                    commands: deviceCommandList(it), 
-                    attributes: deviceAttributeList(it)
-                    ]
-      		} catch (e) {
-      			log.error("Error Occurred Parsing Device "+it.displayName+", Error " + e)
-      		}
-        }    
-    return deviceData
-}
-
-def findDevice(paramid) {
-	def device = deviceList.find { it.id == paramid }
-  	if (device) return device
-	device = sensorList.find { it.id == paramid }
-	if (device) return device
-  	device = switchList.find { it.id == paramid }
-
-	return device
- }
-//No more individual device group definitions after here.
-
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-	if(!state.accessToken) {
-         createAccessToken()
-    }
-    registerAll()
-	state.subscriptionRenewed = 0
-    subscribe(location, null, HubResponseEvent, [filterEvents:false])
-    log.debug "0.5.5"
-}
-
-def authError() {
-    [error: "Permission denied"]
-}
-def renderConfig() {
-    def configJson = new groovy.json.JsonOutput().toJson([
-        description: "JSON API",
-        platforms: [
-            [
-                platform: "SmartThings",
-                name: "SmartThings",
-                app_url: apiServerUrl("/api/smartapps/installations/"),
-                app_id: app.id,
-                access_token:  state.accessToken
-            ]
-        ],
-    ])
-
-    def configString = new groovy.json.JsonOutput().prettyPrint(configJson)
-    render contentType: "text/plain", data: configString
-}
-def renderLocation() {
-  	[
-    	latitude: location.latitude,
-    	longitude: location.longitude,
-    	mode: location.mode,
-    	name: location.name,
-    	temperature_scale: location.temperatureScale,
-    	zip_code: location.zipCode,
-        hubIP: location.hubs[0].localIP,
-        smartapp_version: '0.5.5'
-  	]
-}
-def CommandReply(statusOut, messageOut) {
-	def replyData =
-    	[
-        	status: statusOut,
-            message: messageOut
-        ]
-
-    def replyJson    = new groovy.json.JsonOutput().toJson(replyData)
-    render contentType: "application/json", data: replyJson
-}
-def deviceCommand() {
-	log.info("Command Request")
-	def device = findDevice(params.id)    
-    def command = params.command
-    
-  	if (!device) {
-		log.error("Device Not Found")
-      	CommandReply("Failure", "Device Not Found")
-  	} else if (!device.hasCommand(command)) {
-      	log.error("Device "+device.displayName+" does not have the command "+command)
-      	CommandReply("Failure", "Device "+device.displayName+" does not have the command "+command)
-  	} else {
-      	def value1 = request.JSON?.value1
-      	def value2 = request.JSON?.value2
-      	try {
-      		if (value2) {
-	       		device."$command"(value1,value2)
-	    	} else if (value1) {
-	    		device."$command"(value1)
-	    	} else {
-	    		device."$command"()
-	    	}
-        	log.info("Command Successful for Device "+device.displayName+", Command "+command)
-        	CommandReply("Success", "Device "+device.displayName+", Command "+command)
-      	} catch (e) {
-      		log.error("Error Occurred For Device "+device.displayName+", Command "+command)
- 	    	CommandReply("Failure", "Error Occurred For Device "+device.displayName+", Command "+command)
-      	}
-  	}
-}
-def deviceAttribute() {
-	def device = findDevice(params.id)    
-    def attribute = params.attribute
-  	if (!device) {
-    	httpError(404, "Device not found")
-  	} else {
-      	def currentValue = device.currentValue(attribute)
-      	[currentValue: currentValue]
-  	}
-}
-def deviceQuery() {
-	def device = findDevice(params.id)    
-    if (!device) { 
-    	device = null
-        httpError(404, "Device not found")
-    } 
-    
-    if (result) {
-    	def jsonData =
-        	[
-         		name: device.displayName,
-            	deviceid: device.id,
-            	capabilities: deviceCapabilityList(device),
-            	commands: deviceCommandList(device),
-            	attributes: deviceAttributeList(device)
-         	]
-    	def resultJson = new groovy.json.JsonOutput().toJson(jsonData)
-    	render contentType: "application/json", data: resultJson
-    }
-}
-def deviceCapabilityList(device) {
-  	def i=0
-  	device.capabilities.collectEntries { capability->
-    	[
-      		(capability.name):1
-    	]
-  	}
-}
-def deviceCommandList(device) {
-  	def i=0
-  	device.supportedCommands.collectEntries { command->
-    	[
-      		(command.name): (command.arguments)
-    	]
-  	}
-}
-def deviceAttributeList(device) {
-  	device.supportedAttributes.collectEntries { attribute->
-    	try {
-      		[
-        		(attribute.name): device.currentValue(attribute.name)
-      		]
-    	} catch(e) {
-      		[
-        		(attribute.name): null
-      		]
-    	}
-  	}
-}
-def getAllData() {
-	//Since we're about to send all of the data, we'll count this as a subscription renewal and clear out pending changes.
-	state.subscriptionRenewed = now()
-    state.devchanges = []
-
-
-	def deviceData =
-    [	location: renderLocation(),
-        deviceList: renderDevices() ]
-    def deviceJson = new groovy.json.JsonOutput().toJson(deviceData)
-    render contentType: "application/json", data: deviceJson
-}
-def startSubscription() {
-//This simply registers the subscription.
-    state.subscriptionRenewed = now()
-	def deviceJson = new groovy.json.JsonOutput().toJson([status: "Success"])
-    render contentType: "application/json", data: deviceJson    
-}
-def endSubscription() {
-//Because it takes too long to register for an api command, we don't actually unregister.
-//We simply blank the devchanges and change the subscription renewal to two hours ago.
-	state.devchanges = []
-    state.subscriptionRenewed = 0
- 	def deviceJson = new groovy.json.JsonOutput().toJson([status: "Success"])
-    render contentType: "application/json", data: deviceJson     
-}
-def registerAll() {
-//This has to be done at startup because it takes too long for a normal command.
-	log.debug "Registering All Events"
-    state.devchanges = []
-	registerChangeHandler(deviceList)
-	registerChangeHandler(sensorList)
-	registerChangeHandler(switchList)
-}
-def registerChangeHandler(myList) {
-	myList.each { myDevice ->
-		def theAtts = myDevice.supportedAttributes
-		theAtts.each {att ->
-		    subscribe(myDevice, att.name, changeHandler)
-    	log.debug "Registering ${myDevice.displayName}.${att.name}"
-		}
-	}
-}
-def changeHandler(evt) {
-	//Send to Pubnub if we need to.
-    if (pubnubPublishKey!=null) {
-	    def deviceData = [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
-		def changeJson = new groovy.json.JsonOutput().toJson(deviceData)
-		def changeData = URLEncoder.encode(changeJson)
-        def uri = "http://pubsub.pubnub.com/publish/${pubnubPublishKey}/${pubnubSubscribeKey}/0/${subChannel}/0/${changeData}"
-		log.debug "${uri}"
-    	httpGet(uri)
-    }
-  
-  	if (state.directIP!="") {
-    	//Send Using the Direct Mechanism
-        def deviceData = [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
-        //How do I control the port?!?
-        log.debug "Sending Update to ${state.directIP}:${state.directPort}"
-        def result = new physicalgraph.device.HubAction(
-    		method: "GET",
-    		path: "/update",
-    		headers: [
-        		HOST: "${state.directIP}:${state.directPort}",
-                change_device: evt.deviceId,
-                change_attribute: evt.name,
-                change_value: evt.value,
-                change_date: evt.date
-    		]
-		)
-        sendHubCommand(result)
-    }
-    
-	//Only add to the state's devchanges if the endpoint has renewed in the last 10 minutes.
-    if (state.subscriptionRenewed>(now()-(1000*60*10))) {
-  		if (evt.isStateChange()) {
-			state.devchanges << [device: evt.deviceId, attribute: evt.name, value: evt.value, date: evt.date]
-      }
-    } else if (state.subscriptionRenewed>0) { //Otherwise, clear it
-    	log.debug "Endpoint Subscription Expired. No longer storing changes for devices."
-        state.devchanges=[]
-        state.subscriptionRenewed=0
-    }
-}
-def getChangeEvents() {
-    //Store the changes so we can swap it out very quickly and eliminate the possibility of losing any.
-    //This is mainly to make this thread safe because I'm willing to bet that a change event can fire
-    //while generating/sending the JSON.
-    def oldchanges = state.devchanges
-    state.devchanges=[]
-    state.subscriptionRenewed = now()
-	if (oldchanges.size()==0) {
-        def deviceJson = new groovy.json.JsonOutput().toJson([status: "None"])
-	    render contentType: "application/json", data: deviceJson    
-    } else {
-    	def changeJson = new groovy.json.JsonOutput().toJson([status: "Success", attributes:oldchanges])
-    	render contentType: "application/json", data: changeJson
-	}
-}
-def enableDirectUpdates() {
-	log.debug("Command Request")
-	state.directIP = params.ip
-    state.directPort = params.port
-	log.debug("Trying ${state.directIP}:${state.directPort}")
-	def result = new physicalgraph.device.HubAction(
-    		method: "GET",
-    		path: "/initial",
-    		headers: [
-        		HOST: "${state.directIP}:${state.directPort}"
-    		],
-    		query: deviceData
-		)
-     sendHubCommand(result)
-}
-
-def HubResponseEvent(evt) {
-	log.debug(evt.description)
-}
-
-def locationHandler(evt) {
-    def description = evt.description
-    def hub = evt?.hubId
-
-    log.debug "cp desc: " + description
-    if (description.count(",") > 4)
-    {
-def bodyString = new String(description.split(',')[5].split(":")[1].decodeBase64())
-log.debug(bodyString)
-}
-}
-
-def getSubscriptionService() {
-	def replyData =
-    	[
-        	pubnub_publishkey: pubnubPublishKey,
-            pubnub_subscribekey: pubnubSubscribeKey,
-            pubnub_channel: subChannel
-        ]
-
-    def replyJson    = new groovy.json.JsonOutput().toJson(replyData)
-    render contentType: "application/json", data: replyJson
-}
-
-mappings {
-    if (!params.access_token || (params.access_token && params.access_token != state.accessToken)) {
-        path("/devices")                        { action: [GET: "authError"] }
-        path("/config")                         { action: [GET: "authError"] }
-        path("/location")                       { action: [GET: "authError"] }
-        path("/:id/command/:command")     		{ action: [POST: "authError"] }
-        path("/:id/query")						{ action: [GET: "authError"] }
-        path("/:id/attribute/:attribute") 		{ action: [GET: "authError"] }
-        path("/subscribe")                      { action: [GET: "authError"] }
-        path("/getUpdates")                     { action: [GET: "authError"] }
-        path("/unsubscribe")                    { action: [GET: "authError"] }
-        path("/startDirect/:ip/:port")          { action: [GET: "authError"] }
-        path("/getSubcriptionService")          { action: [GET: "authError"] }
-
-    } else {
-        path("/devices")                        { action: [GET: "getAllData"] }
-        path("/config")                         { action: [GET: "renderConfig"]  }
-        path("/location")                       { action: [GET: "renderLocation"] }
-        path("/:id/command/:command")     		{ action: [POST: "deviceCommand"] }
-        path("/:id/query")						{ action: [GET: "deviceQuery"] }
-        path("/:id/attribute/:attribute") 		{ action: [GET: "deviceAttribute"] }
-        path("/subscribe")                      { action: [GET: "startSubscription"] }
-        path("/getUpdates")                     { action: [GET: "getChangeEvents"] }
-        path("/unsubscribe")                    { action: [GET: "endSubscription"] }
-        path("/startDirect/:ip/:port")          { action: [GET: "enableDirectUpdates"] }
-        path("/getSubcriptionService")          { action: [GET: "getSubscriptionService"] }
-    }
-}

smartapps/smartthings/smart-nightlight.src/smart-nightlight.groovy

@@ -98,7 +98,7 @@ def motionHandler(evt) {
 	else {
 		state.motionStopTime = now()
 		if(delayMinutes) {
-			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: true])
+			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: false])
 		} else {
 			turnOffMotionAfterDelay()
 		}

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Copyright 2015 SmartThings
  *

smartapps/torick-net/smartthingstostart.src/smartthingstostart.groovy

@@ -0,0 +1,373 @@
+/**
+ *  SmartThingsToStart REST Api
+ *
+ *  Copyright 2017 Dr1rrb
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+	name: "SmartThingsToStart",
+	namespace: "torick.net",
+	author: "Dr1rrb",
+	description: "SmartThingsToStart REST Api",
+	category: "My Apps",
+	iconUrl: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo.png",
+	iconX2Url: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo@2X.png",
+	iconX3Url: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo@3X.png",
+	oauth: true)
+
+
+preferences {
+	section("Control these devices") {
+		input "switches", "capability.switch", title: "Select switches", multiple: true, required: false
+		input "bubls", "capability.bulb", title: "Select bubls", hideWhenEmpty: true, multiple: true, required: false
+		input "lights", "capability.light", title: "Select lights", hideWhenEmpty: true, multiple: true, required: false
+		input "outlets", "capability.outlet", title: "Select outlets", hideWhenEmpty: true, multiple: true, required: false
+		input "relaySwitches", "capability.relaySwitch", title: "Select relay switches", hideWhenEmpty: true, multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/infos") {
+		action: [GET: "retreiveServerInfos"]
+  	}
+    path("/items") {
+		action: [GET: "retreiveDevicesAndRoutines"]
+  	}
+	path("/device/:id") {
+		action: [GET: "retreiveDevice"]
+	}
+	path("/device/:id/subscription/:subscriptionId") {
+		action: [
+			PUT: "updateOrCreateSubscription",
+			POST: "updateOrCreateSubscription",
+		]
+	}
+    // TODO
+	//path("/device/:id/unsubscribe") {
+	//	action: [POST: "unsubscribeFromDevice"]
+	//}
+	path("/device/:id/:command") {
+		action: [ PUT: "updateDevice" ]
+	}
+    path("/routine/:id/execute") {
+		action: [PUT: "executeRoutine"]
+	}
+}
+
+// Region: App lifecycle
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+    //state.pushChannels = [:]
+	initialize()
+}
+
+def initialize() {
+	def channels = state.pushChannels = state.pushChannels ?: [:];
+	channels.each 
+	{ 
+		def device = findDevice(it.key);
+		if (device != null)
+		{
+			subscribeToDevice(device);
+		}
+	}
+}
+
+
+// Region: Http request handlers
+def retreiveServerInfos()
+{
+	return [version: 1]
+}
+
+def retreiveDevicesAndRoutines() {
+	def details = params.details == "true" ? true : false;
+
+	return [
+		devices: getDevices().collect { getDeviceInfos(it, details) }, 
+		routines: location.helloHome?.getPhrases().collect { getRoutineInfos(it, details) }
+	];
+}
+
+def retreiveDevice() {
+	def device = getDevice(params.id);
+	def details = params.details == "true" ? true : false;
+	
+	return getDeviceInfos(device, details);
+}
+
+def updateOrCreateSubscription() {
+	def device = getDevice(params.id);
+	def channelUri = notNull("channelUri", request.JSON?.channelUri);
+	def token = notNull("token", request.JSON?.token);
+	
+	log.debug "Subscribing to device '${device.id}' (target: '${channelUri}' / token: '${token}')"
+
+	// Get or create the push notification channel from / into the local state
+	def subscriptionId = params.subscriptionId ?: UUID.randomUUID().toString() ;
+	def allSubscriptions = state.pushChannels ?: (state.pushChannels = [:]);
+	def deviceSubscriptions = allSubscriptions[device.id] ?: (allSubscriptions[device.id] = []);
+	def subscription = deviceSubscriptions.find { it.id == subscriptionId };
+	if (subscription == null)
+	{
+		deviceSubscriptions << [
+			id: subscriptionId,
+			deviceId: device.id,
+			channelUri: channelUri,
+			token: token
+		];
+	}
+	else
+	{
+		subscription["channelUri"] = channelUri;
+		subscription["token"]  = token;
+	}
+	
+	log.debug "Active subscriptions: \n" + state.pushChannels.collect { "** Device ${it.key} **\n" + it.value.collect{c -> "- - - > ${c.channelUri} : ${c.token.substring(0, 10)}..."}.join('\n') + "\n***************************" }.join('\n\n')
+	
+	// (Re)create the subscription(s)
+	subscribeToDevice(device)
+
+	return [subscriptionId: subscriptionId];
+}
+
+def subscribeToDevice(device)
+{
+	log.debug "Subscribing to device '${device.id}'"
+
+	unsubscribe(device);
+	subscribe(device, "switch", switchStateChanged)
+
+	if (device.hasCapability("Color Control"))
+	{
+		log.debug "Device '${device.id}' has also the color capability. Subscribe to it."
+		subscribe(device, "color", colorStateChanged)
+	}
+}
+
+def switchStateChanged(eventArgs) { sendPushNotification("switch", eventArgs) }
+def colorStateChanged(eventArgs) { sendPushNotification("color", eventArgs) }
+
+def updateDevice() {
+	def device = getDevice(params.id)
+	def command = notNull("command", params.command)
+	
+	log.debug "Executing '${command}' on device '${device.id}'."
+	
+	switch(command) {
+		case "on":
+		case "On":
+			device.on()
+			break
+
+		case "off":
+		case "Off":
+			device.off()
+			break
+
+		case "toggle":
+		case "Toggle":
+			if (device.currentSwitch == "on")
+				device.off();
+			else
+				device.on();
+			break;
+
+		default:
+			httpError(501, "'${command}' is not a valid command for '${device.id}'")
+	}
+	
+	return getDeviceInfos(device);
+}
+
+def executeRoutine() {
+	def routine = getRoutine(params.id);
+    log.debug "Executing routine '${routine.id}' (${routine.label})"
+    
+    location.helloHome?.execute(routine.id)
+}
+
+// Region: Get device
+def getDevices()
+{
+	return switches
+		+ bubls
+		+ lights
+		+ outlets
+		+ relaySwitches;
+}
+
+def findDevice(deviceId)
+{
+	notNull("deviceId", deviceId);
+	
+	return getDevices().find { it.id == deviceId };
+}
+
+def getDevice(deviceId)
+{
+	def device = findDevice(deviceId);
+	if (device == null)
+	{
+		httpError(404, "Device '${deviceId}' not found.")
+	}
+	return device;
+}
+
+// Region: Get routine
+def findRoutine(routineId)
+{
+	return location.helloHome?.getPhrases().find{ it.id == routineId};
+}
+
+def getRoutine(routineId)
+{
+	def routine = findRoutine(routineId);
+	if (routine == null)
+	{
+		httpError(404, "Routine '${routineId}' not found.")
+	}
+	return routine;
+}
+
+// Region: Parameters assertion helpers
+def notNull(parameterName, value)
+{
+	if(value == null || value == "")
+	{
+		httpError(404, "Missing parameter '${parameterName}'.")
+	}
+	return value;
+}
+
+// Region: Get infos
+def getDeviceInfos(device, details = false)
+{
+   	def infos = [
+		id: device.id,
+		name: device.displayName,
+		state: device.currentValue("switch"),
+        color: device.currentValue("color"),
+        hue: device.currentValue("hue"),
+        saturation: device.currentValue("saturation"),
+		capabilities: device.capabilities.collect { getCapabilityInfos(it, details) }
+	]
+	
+	if (details)
+	{
+		infos["attributes"] = device.supportedAttributes.collect { getAttributeInfos(it, details) }
+		infos["commands"] = device.supportedCommands.collect { getCommandInfos(it, details) }
+	}
+	
+	return infos;
+}
+
+def getCapabilityInfos(capablity, details = false)
+{
+	def infos = [name: capablity.name]
+	
+	if(details)
+	{
+		infos["attributes"] = capablity.attributes.collect { getAttributeInfos(it, details) }
+		infos["commands"] = capablity.commands.collect { getCommandInfos(it, details) }
+	}
+	
+	return infos;
+}
+
+def getCommandInfos(command, details = false)
+{
+	return [
+		name: command.name, 
+		arguments: command.arguments
+	]
+}
+
+def getAttributeInfos(attribute, details = false)
+{
+	return [
+		name: attribute.name, 
+		arguments: attribute.dataType,
+		values: attribute.values
+	]
+}
+
+def getRoutineInfos(routine, details = false)
+{
+	def infos = [
+    	id: routine.id,
+        name: routine.label
+	];
+    
+    if (details)
+    {
+    	infos["hasSecureActions"] = routine.hasSecureActions;
+        infos["action"] = routine.action;
+    }
+    
+    return infos;
+}
+
+// Region: Push notification
+def sendPushNotification(capability, eventArgs)
+{
+	def deviceId = eventArgs.deviceId;
+	log.debug "Received notification for '${capability}' for device '${deviceId}'.";
+	
+	def subscriptions = state.pushChannels.get(deviceId);
+	if (subscriptions == null || subscriptions.empty)
+	{
+		log.error "No subscription found for device ${deviceId}, unsubscribing!";
+		unsubscribe(eventArgs.device);
+		
+		return;
+	}
+
+	subscriptions.groupBy { it.channelUri }.each { sendPushNotification(capability, eventArgs, it.key, it.value) }
+}
+
+def sendPushNotification(capability, eventArgs, channelUri, subscriptions)
+{
+	try {
+		def request = [
+			uri: channelUri,
+			//headers: [name: "Authorization", value: "Bearer ${subscription.token}"],
+			body: [
+				location: [
+					id: eventArgs.locationId,
+				],
+				device: getDeviceInfos(eventArgs.device),
+				event: [
+					source: capability, 
+					date: eventArgs.isoDate, 
+					value: eventArgs.value,
+					name: eventArgs.name,
+				],
+				subscriptions: subscriptions.collect { [id: it.id, token: it.token] }
+			]
+		]
+		
+		// Async post is still in beta stage ...
+		httpPostJson(request) { resp -> log.debug "response: ${resp.status}." }
+		
+	} catch (e) {
+		log.error "Failed to push notification: ${e}"
+	}
+}

smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy

@@ -125,19 +125,19 @@
       if(allOk) {
     
       if(everyoneIsAway() && (state.sunMode == "sunrise")) {
-        log.debug("Home is Empty  Setting New Away Mode")
+        log.info("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
     
       if(everyoneIsAway() && (state.sunMode == "sunset")) {
-        log.debug("Home is Empty  Setting New Away Mode")
+        log.info("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
       
       else {
-      log.debug("Home is Occupied Setting New Home Mode")
+      log.info("Home is Occupied Setting New Home Mode")
       setHome()
     
     
@@ -152,7 +152,7 @@
         log.debug("Checking if everyone is away")
     
         if(everyoneIsAway()) {
-          log.debug("Nobody is home, running away sequence")
+          log.info("Nobody is home, running away sequence")
           def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
           runIn(delay, "setAway")
         }
@@ -161,7 +161,7 @@
     else {
     	def lastTime = state[evt.deviceId]
         if (lastTime == null || now() - lastTime >= 1 * 60000) {
-      		log.debug("Someone is home, running home sequence")
+      		log.info("Someone is home, running home sequence")
       		setHome()
         }    
     	state[evt.deviceId] = now()
@@ -175,14 +175,14 @@
       if(everyoneIsAway()) {
         if(state.sunMode == "sunset") {
           def message = "Performing \"${awayNight}\" for you as requested."
-          log.debug(message)
+          log.info(message)
           sendAway(message)
           location.helloHome.execute(settings.awayNight)
         }
         
         else if(state.sunMode == "sunrise") {
           def message = "Performing \"${awayDay}\" for you as requested."
-          log.debug(message)
+          log.info(message)
           sendAway(message)
           location.helloHome.execute(settings.awayDay)
           }
@@ -192,19 +192,19 @@
       }
     
       else {
-        log.debug("Somebody returned home before we set to '${newAwayMode}'")
+        log.info("Somebody returned home before we set to '${newAwayMode}'")
       }
     }
     
     //set home mode when house is occupied
     def setHome() {
     sendOutOfDateNotification()
-    log.debug("Setting Home Mode!!")
+    log.info("Setting Home Mode!!")
     if(anyoneIsHome()) {
           if(state.sunMode == "sunset"){
           if (location.mode != "${homeModeNight}"){
           def message = "Performing \"${homeNight}\" for you as requested."
-            log.debug(message)
+            log.info(message)
             sendHome(message)
             location.helloHome.execute(settings.homeNight)
             }
@@ -213,7 +213,7 @@
           if(state.sunMode == "sunrise"){
           if (location.mode != "${homeModeDay}"){
           def message = "Performing \"${homeDay}\" for you as requested."
-            log.debug(message)
+            log.info(message)
             sendHome(message)
             location.helloHome.execute(settings.homeDay)
                 }
@@ -329,4 +329,4 @@
         	sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
         	state.lastTime = (new Date() + 31).getTime()
         }
-    }
+    }