Merge pull request #2108 from SmartThingsCommunity/staging

Rolling up staging to production for deploy

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -1,34 +0,0 @@
-# Aeon Labs Key Fob
-
-Cloud Execution
-
-Works with:
-
-* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
-* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -20,7 +19,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -133,9 +131,6 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
-
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -1,33 +0,0 @@
-# Aeon Minimote
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
-* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,7 +18,6 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -121,7 +119,5 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -300,21 +300,15 @@ def setColor(value) {
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
 
-    if(value.hue) {
-        sendEvent(name: "hue", value: value.hue, displayed: false)
-    }
-    if(value.saturation) {
-        sendEvent(name: "saturation", value: value.saturation, displayed: false)
-    }
-    if(value.hex?.trim()) {
-        sendEvent(name: "color", value: value.hex, displayed: false)
-    }
-    if (value.level) {
-        sendEvent(name: "level", value: value.level)
-    }
-    if (value.switch?.trim()) {
-        sendEvent(name: "switch", value: value.switch)
-    }
+	sendEvent(name: "hue", value: value.hue, displayed: false)
+	sendEvent(name: "saturation", value: value.saturation, displayed: false)
+	sendEvent(name: "color", value: value.hex, displayed: false)
+	if (value.level) {
+		sendEvent(name: "level", value: value.level)
+	}
+	if (value.switch) {
+		sendEvent(name: "switch", value: value.switch)
+	}
 
     sendRGB(value.rh, value.gh, value.bh)
 }