MSA-2042: A sensor to see if something has been open too long, and then flip a switch (usually simulated)

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.12"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
     }
     repositories {
         mavenLocal()
@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -32,7 +32,7 @@ repositories {
             username smartThingsArtifactoryUserName
             password smartThingsArtifactoryPassword
         }
-        url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+        url "https://artifactory.smartthings.com/libs-release-local"
     }
 }
 
@@ -51,10 +51,10 @@ sourceSets {
 
 dependencies {
     devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    devicetypesCompile 'smartthings:appengine-z-wave:0.1.3'
-    devicetypesCompile 'smartthings:appengine-zigbee:0.1.12'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
     smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    smartappsCompile 'smartthings:appengine-common:0.1.9'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
     smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
     smartappsCompile 'org.grails:grails-web:2.3.11'
     smartappsCompile 'org.json:json:20140107'
@@ -74,19 +74,19 @@ slackSendMessage {
     String username
     switch (branch) {
         case 'master':
-            username = 'DEV'
+            username = 'Hickory'
             iconUrl = wolverine
             color = '#35D0F2'
             messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
             break
         case 'staging':
-            username = 'STG'
+            username = 'Dickory'
             iconUrl = beach
             color = '#FFDE20'
             messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
             break
         case 'production':
-            username = 'PRD'
+            username = 'Dock'
             iconUrl = drinks
             color = '#FF1D23'
             messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -1,34 +0,0 @@
-# Aeon Labs Key Fob
-
-Cloud Execution
-
-Works with:
-
-* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
-* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -20,7 +19,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
 		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
@@ -133,9 +131,6 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
-
 	def zwMap = getZwaveInfo()
 	def buttons = 4 // Default for Key Fob
 

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -1,33 +0,0 @@
-# Aeon Minimote
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
-* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -19,7 +18,6 @@ metadata {
 		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -121,7 +119,5 @@ def updated() {
 }
 
 def initialize() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
 	sendEvent(name: "numberOfButtons", value: 4)
 }

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -35,8 +35,8 @@ metadata {
 
 	// tile definitions
 	tiles(scale: 2) {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -48,8 +48,8 @@ metadata {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "contact"
-		details(["contact","refresh"])
+		main "valve"
+		details(["valve","refresh"])
 	}
 }
 

devicetypes/smartthings/zigbee-button.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zigbee-button.src/README.md

@@ -1,43 +0,0 @@
-# ZigBee Button
-
-Cloud Execution
-
-Works with: 
-
-* [OSRAM LIGHTIFY Dimming Switch](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
-* [Iris Smart Button](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
-* [Iris KeyFob](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - It represents that a device has commands.
-* **Battery** - It defines that the device has a battery
-* **Button** - It defines that a device has one or more buttons
-* **Holdable Button** - It defines that a device has one or more holdable buttons
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - it represents that a Device has attributes.
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __722min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-It may also happen that you need to reset the device.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [OSRAM LIGHTIFY Dimming Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000236823-SYLVANIA-Dimming-Switch)
-* [Iris Smart Button Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/115000190186-Iris-Smart-Button)
-* [Iris KeyFob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/217409686-Iris-Smart-Fob)

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -24,7 +24,6 @@ metadata {
         capability "Configuration"
         capability "Refresh"
         capability "Sensor"
-        capability "Health Check"
 
         command "enrollResponse"
 
@@ -183,13 +182,6 @@ private Map parseNonIasButtonMessage(Map descMap){
     }
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    refresh()
-}
-
 def refresh() {
     log.debug "Refreshing Battery"
 
@@ -198,8 +190,6 @@ def refresh() {
 }
 
 def configure() {
-    // Device-Watch allows 2 check-in misses from device (plus 2 mins lag time)
-    sendEvent(name: "checkInterval", value: 2 * 6 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting, IAS CIE, and Bindings."
     def cmds = []
     if (device.getDataValue("model") == "3450-L") {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -38,8 +38,8 @@ metadata {
     }
 
     tiles(scale: 2) {
-        multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+        multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -58,8 +58,8 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["contact"])
-        details(["contact", "battery", "refresh"])
+        main(["valve"])
+        details(["valve", "battery", "refresh"])
     }
 }
 

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -195,10 +195,7 @@ def registerDeviceChange() {
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
-				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
-				// For now, we will only have one subscription endpoint per device
-				state.deviceSubscriptionMap.remove(deviceId)
-				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 

smartapps/smartthings/left-it-open-set-switch.src/left-it-open-set-switch.groovy

@@ -0,0 +1,97 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Left It Open
+ *
+ *  Author: SmartThings
+ *  Date: 2013-05-09
+ */
+definition(
+    name: "Left It Open (Set switch)",
+    namespace: "smartthings",
+    author: "SmartThings",
+    description: "Turns on a switch if you have left a door or window open longer that a specified amount of time. Turns if off when closed",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/bon-voyage.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/ModeMagic/bon-voyage%402x.png"
+)
+
+preferences {
+
+	section("Monitor this door or window") {
+		input "contact", "capability.contactSensor"
+	}
+	section("And notify me if it's open for more than this many minutes (default 10)") {
+		input "openThreshold", "number", description: "Number of minutes", required: false
+	}
+	section("Turn on/off a switch... (usually a simulated one)") {
+		input "switch1", "capability.switch"
+	}
+}
+
+def installed() {
+	log.trace "installed()"
+	subscribe()
+}
+
+def updated() {
+	log.trace "updated()"
+	unsubscribe()
+	subscribe()
+}
+
+def subscribe() {
+	subscribe(contact, "contact.open", doorOpen)
+	subscribe(contact, "contact.closed", doorClosed)
+}
+
+def doorOpen(evt)
+{
+	log.trace "doorOpen($evt.name: $evt.value)"
+	def t0 = now()
+	def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
+	runIn(delay, doorOpenTooLong, [overwrite: false])
+	log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
+}
+
+def doorClosed(evt)
+{
+	log.trace "doorClosed($evt.name: $evt.value)"
+        switch1.off()
+}
+
+def doorOpenTooLong() {
+	def contactState = contact.currentState("contact")
+    def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
+
+	if (contactState.value == "open") {
+		def elapsed = now() - contactState.rawDateCreated.time
+		def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+		if (elapsed >= threshold) {
+			log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
+			sendMessage()
+            runIn(freq, doorOpenTooLong, [overwrite: false])
+		} else {
+			log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
+		}
+	} else {
+		log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
+	}
+}
+
+void sendMessage()
+{
+	def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
+	def msg = "${contact.displayName} has been left open for ${minutes} minutes."
+	log.info msg
+        switch1.on()
+}