MSA-2118: - For use with Flow Meter -

Leak Detector SmartApp allows uses to create custom rules for turning off their water and getting notifications from their flow meter.  Catch a running toilet and turn off the water automatically.  Detect leaky pipes and notify user of leak alert. 5 different trigger types: Continuous flow, accumulated flow, Mode, Time Period, Water Valve Status.  Parent & Child app need to be installed as a pair (parent first).

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -27,13 +27,9 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor 6 is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+Aeon MultiSensor reports in once every hour.
 
-* __32min__ checkInterval
+* __122min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -130,13 +130,13 @@ metadata {
 }
 
 def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 122min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 122min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -171,8 +171,8 @@ private Map getBatteryResult(rawValue) {
 			def pct = batteryMap[volts]
 			result.value = pct
 		} else {
-			def minVolts = 2.1
-			def maxVolts = 3.0
+			def minVolts = 2.4
+			def maxVolts = 2.7
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -274,7 +274,7 @@ private Map getBatteryResult(rawValue) {
 			result.value = pct
 		} else {
 			def minVolts = 2.1
-			def maxVolts = 3.0
+			def maxVolts = 2.7
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -15,10 +15,9 @@ metadata {
 	definition (name: "Z-Wave Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Temperature Measurement"
-		capability "Relative Humidity Measurement"
 		capability "Thermostat"
 		capability "Configuration"
-		capability "Polling"
+		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
 		
@@ -117,7 +116,7 @@ metadata {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
 		}
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"polling.poll", icon:"st.secondary.refresh"
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		main "temperature"
 		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
@@ -125,13 +124,20 @@ metadata {
 }
 
 def installed(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendHubCommand(new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format()))
+	initialize()
 }
 
 def updated(){
+	initialize()
+}
+
+def initialize() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	unschedule()
+	runEvery5Minutes("refresh")
+	refresh()
 }
 
 def parse(String description)
@@ -149,6 +155,7 @@ def parse(String description)
 		]
 		if (map.name == "thermostatMode") {
 			state.lastTriedMode = map.value
+			map.data = [supportedThermostatModes:state.supportedThermostatModes]
 			if (map.value == "cool") {
 				map2.value = device.latestValue("coolingSetpoint")
 				log.info "THERMOSTAT, latest cooling setpoint = ${map2.value}"
@@ -172,6 +179,7 @@ def parse(String description)
 		}
 	} else if (map.name == "thermostatFanMode" && map.isStateChange) {
 		state.lastTriedFanMode = map.value
+		map.data = [supportedThermostatFanModes: state.supportedThermostatFanModes]
 	}
 	log.debug "Parse returned $result"
 	result
@@ -305,26 +313,26 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
-	def supportedModes = ""
-	if(cmd.off) { supportedModes += "off " }
-	if(cmd.heat) { supportedModes += "heat " }
-	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergency heat " }
-	if(cmd.cool) { supportedModes += "cool " }
-	if(cmd.auto) { supportedModes += "auto " }
+	def supportedModes = []
+	if(cmd.off) { supportedModes << "off" }
+	if(cmd.heat) { supportedModes << "heat" }
+	if(cmd.cool) { supportedModes << "cool" }
+	if(cmd.auto) { supportedModes << "auto" }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes << "emergency heat" }
 
-	state.supportedModes = supportedModes
-	// No events to be generated, return empty map
+	state.supportedThermostatModes = supportedModes
+	sendEvent(name: "supportedThermostatModes", value: supportedModes, displayed: false)
 	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
-	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
-	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
-	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
+	def supportedFanModes = []
+	if(cmd.auto) { supportedFanModes << "auto" } // "fanAuto "
+	if(cmd.circulation) { supportedFanModes << "circulate" } // "fanCirculate"
+	if(cmd.low) { supportedFanModes << "on" } // "fanOn"
 
-	state.supportedFanModes = supportedFanModes
-	// No events to be generated, return empty map
+	state.supportedThermostatFanModes = supportedFanModes
+	sendEvent(name: "supportedThermostatFanModes", value: supportedFanModes, displayed: false)
 	return [:]
 }
 
@@ -337,15 +345,17 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 // Command Implementations
-def poll() {
-	delayBetween([
-		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	], 2300)
+def refresh() {
+	def cmds = []
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.sensorMultilevelV2.sensorMultilevelGet().format()) // current temperature
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
+	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
+	sendHubCommand(cmds)
 }
 
 def quickSetHeat(degrees) {
@@ -416,28 +426,14 @@ def ping() {
 	poll()
 }
 
-def configure() {
-	delayBetween([
-		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
-		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
-		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-		zwave.thermostatModeV2.thermostatModeGet().format(),
-		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	], 2300)
-}
-
 def modes() {
-	["off", "heat", "cool", "auto", "emergency heat"]
+	return state.supportedThermostatModes
 }
 
 def switchMode() {
 	def currentMode = device.currentState("thermostatMode")?.value
-	def lastTriedMode = state.lastTriedMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedModes")
+	def lastTriedMode = state.lastTriedMode ?: currentMode ?: ["off"]
+	def supportedModes = getDataByName("supportedThermostatModes")
 	def modeOrder = modes()
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
@@ -454,7 +450,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-	def supportedModes = getDataByName("supportedModes")
+	def supportedModes = getDataByName("supportedThermostatModes")
 	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
@@ -466,9 +462,9 @@ def switchToMode(nextMode) {
 
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
-	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
-	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
+	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: ["off"]
+	def supportedModes = getDataByName("supportedThermostatFanModes") ?: ["auto", "on"]
+	def modeOrder = state.supportedThermostatFanModes
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
 	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
@@ -478,7 +474,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-	def supportedFanModes = getDataByName("supportedFanModes")
+	def supportedFanModes = getDataByName("supportedThermostatFanModes")
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand

smartapps/fortrezz/fortrezz-leak-detector.src/fortrezz-leak-detector.groovy

@@ -0,0 +1,320 @@
+/**
+ *  Leak Detector for FortrezZ Water Meter
+ *
+ *  Copyright 2016 Daniel Kurin
+ *
+ */
+definition(
+    name: "FortrezZ Leak Detector",
+    namespace: "fortrezz",
+    author: "FortrezZ, LLC",
+    description: "Use the FortrezZ Water Meter to identify leaks in your home's water system.",
+    category: "Green Living",
+    iconUrl: "http://swiftlet.technology/wp-content/uploads/2016/05/logo-square-200-1.png",
+    iconX2Url: "http://swiftlet.technology/wp-content/uploads/2016/05/logo-square-500.png",
+    iconX3Url: "http://swiftlet.technology/wp-content/uploads/2016/05/logo-square.png")
+
+
+preferences {
+	page(name: "page2", title: "Select device and actions", install: true, uninstall: true)
+}
+
+def page2() {
+    dynamicPage(name: "page2") {
+        section("Choose a water meter to monitor:") {
+            input(name: "meter", type: "capability.energyMeter", title: "Water Meter", description: null, required: true, submitOnChange: true)
+        }
+
+        if (meter) {
+            section {
+                app(name: "childRules", appName: "Leak Detector", namespace: "fortrezz", title: "Create New Leak Detector...", multiple: true)
+            }
+        }
+        
+        section("Send notifications through...") {
+        	input(name: "pushNotification", type: "bool", title: "SmartThings App", required: false)
+        	input(name: "smsNotification", type: "bool", title: "Text Message (SMS)", submitOnChange: true, required: false)
+            if (smsNotification)
+            {
+            	input(name: "phone", type: "phone", title: "Phone number?", required: true)
+            }
+            input(name: "minutesBetweenNotifications", type: "number", title: "Minutes between notifications", required: true, defaultValue: 60)
+        }
+
+		log.debug "there are ${childApps.size()} child smartapps"
+        def childRules = []
+        childApps.each {child ->
+            //log.debug "child ${child.id}: ${child.settings()}"
+            childRules << [id: child.id, rules: child.settings()]
+        }
+        state.rules = childRules
+        //log.debug("Child Rules: ${state.rules} w/ length ${state.rules.toString().length()}")
+        log.debug "Parent Settings: ${settings}"
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(meter, "cumulative", cumulativeHandler)
+	subscribe(meter, "gpm", gpmHandler)
+    log.debug("Subscribing to events")
+}
+
+def cumulativeHandler(evt) {
+	//Date Stuff
+   	def daysOfTheWeek = ["Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"]
+    def today = new Date()
+    today.clearTime()
+    Calendar c = Calendar.getInstance();
+    c.setTime(today);
+    int dow = c.get(Calendar.DAY_OF_WEEK);
+    def dowName = daysOfTheWeek[dow-1]
+    
+	def gpm = meter.latestValue("gpm")
+    def cumulative = new BigDecimal(evt.value)
+    log.debug "Cumulative Handler: [gpm: ${gpm}, cumulative: ${cumulative}]"
+    def rules = state.rules
+    rules.each { it ->
+        def r = it.rules
+        def childAppID = it.id
+    	//log.debug("Rule: ${r}")
+    	switch (r.type) {
+            case "Mode":
+            	log.debug("Mode Test: ${location.currentMode} in ${r.modes}... ${findIn(r.modes, location.currentMode)}")
+                if (findIn(r.modes, location.currentMode))
+                {
+                	log.debug("Threshold:${r.gpm}, Value:${gpm}")
+                	if(gpm > r.gpm)
+                    {
+                    	sendNotification(childAppID, gpm)
+                        if(r.dev)
+                        {
+                        	//log.debug("Child App: ${childAppID}")
+                        	def activityApp = getChildById(childAppID)
+                            activityApp.devAction(r.command)
+                        }
+                    }
+                }
+                break
+
+            case "Time Period":
+            	log.debug("Time Period Test: ${r}")
+                def boolTime = timeOfDayIsBetween(r.startTime, r.endTime, new Date(), location.timeZone)
+                def boolDay = !r.days || findIn(r.days, dowName) // Truth Table of this mess: http://swiftlet.technology/wp-content/uploads/2016/05/IMG_20160523_150600.jpg
+                def boolMode = !r.modes || findIn(r.modes, location.currentMode)
+                
+            	if(boolTime && boolDay && boolMode)
+                {
+                    if(gpm > r.gpm)
+                    {
+                        sendNotification(childAppID, gpm)
+                        if(r.dev)
+                        {
+                            def activityApp = getChildById(childAppID)
+                            activityApp.devAction(r.command)
+                        }
+                    }
+                }
+            	break
+
+            case "Accumulated Flow":
+            	log.debug("Accumulated Flow Test: ${r}")
+                def boolTime = timeOfDayIsBetween(r.startTime, r.endTime, new Date(), location.timeZone)
+                def boolDay = !r.days || findIn(r.days, dowName) // Truth Table of this mess: http://swiftlet.technology/wp-content/uploads/2016/05/IMG_20160523_150600.jpg
+                def boolMode = !r.modes || findIn(r.modes, location.currentMode)
+                
+            	if(boolTime && boolDay && boolMode)
+                {
+                	def delta = 0
+                    if(state["accHistory${childAppID}"] != null)
+                    {
+                    	delta = cumulative - state["accHistory${childAppID}"]
+                    }
+                    else
+                    {
+                    	state["accHistory${childAppID}"] = cumulative
+                    }
+                	log.debug("Currently in specified time, delta from beginning of time period: ${delta}")
+                    
+                    if(delta > r.gallons)
+                    {
+                        sendNotification(childAppID, delta)
+                        if(r.dev)
+                        {
+                            def activityApp = getChildById(childAppID)
+                            activityApp.devAction(r.command)
+                        }
+                    }
+                }
+                else
+                {
+                	log.debug("Outside specified time, saving value")
+                    state["accHistory${childAppID}"] = cumulative
+                }
+            	break
+
+            case "Continuous Flow":
+            	log.debug("Continuous Flow Test: ${r}")
+            	def contMinutes = 0
+                def boolMode = !r.modes || findIn(r.modes, location.currentMode)
+
+				if(gpm != 0)
+                {
+                	if(state["contHistory${childAppID}"] == [])
+                    {
+                    	state["contHistory${childAppID}"] = new Date()
+                    }
+                    else
+                    {
+                    	//def td = now() - Date.parse("yyyy-MM-dd'T'HH:mm:ss'Z'", state["contHistory${childAppID}"]).getTime()
+                        //log.debug(state["contHistory${childAppID}"])
+                        //def historyDate = new Date(state["contHistory${childAppID}"])
+                    	def historyDate = new Date().parse("yyyy-MM-dd'T'HH:mm:ssZ", state["contHistory${childAppID}"])
+                    	def td = now() - historyDate.getTime()
+                        //log.debug("Now minus then: ${td}")
+                        contMinutes = td/60000
+                        log.debug("Minutes of constant flow: ${contMinutes}, since ${state["contHistory${childAppID}"]}")
+                    }
+                }
+                
+                if(contMinutes > r.flowMinutes && boolMode)
+                {
+                    sendNotification(childAppID, Math.round(contMinutes))
+                    if(r.dev)
+                    {
+                        def activityApp = getChildById(childAppID)
+                        activityApp.devAction(r.command)
+                    }
+                }
+                break
+
+            case "Water Valve Status":
+            	log.debug("Water Valve Test: ${r}")
+            	def child = getChildById(childAppID)
+                //log.debug("Water Valve Child App: ${child.id}")
+                if(child.isValveStatus(r.valveStatus))
+                {
+                    if(gpm > r.gpm)
+                    {
+                        sendNotification(childAppID, gpm)
+                   }
+                }
+                break
+
+            case "Switch Status":
+            	break
+
+            default:
+                break
+        }
+    }
+}
+
+def gpmHandler(evt) {
+	//Date Stuff
+   	def daysOfTheWeek = ["Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"]
+    def today = new Date()
+    today.clearTime()
+    Calendar c = Calendar.getInstance();
+    c.setTime(today);
+    int dow = c.get(Calendar.DAY_OF_WEEK);
+    def dowName = daysOfTheWeek[dow-1]
+    
+	def gpm = evt.value
+    def cumulative = meter.latestValue("cumulative")
+    log.debug "GPM Handler: [gpm: ${gpm}, cumulative: ${cumulative}]"
+    def rules = state.rules
+    rules.each { it ->
+        def r = it.rules
+        def childAppID = it.id
+    	switch (r.type) {
+
+			// This is down here because "cumulative" never gets sent in the case of 0 change between messages
+			case "Continuous Flow":
+            	log.debug("Continuous Flow Test (GPM): ${r}")
+            	def contMinutes = 0
+
+				if(gpm == "0.0")
+                {
+                	state["contHistory${childAppID}"] = []
+                }
+                //log.debug("contHistory${childAppID} is ${state["contHistory${childAppID}"]}")
+                break
+
+            default:
+                break
+        }
+	}	
+}
+def sendNotification(device, gpm)
+{
+	def set = getChildById(device).settings()
+	def msg = ""
+    if(set.type == "Accumulated Flow")
+    {
+    	msg = "Water Flow Warning: \"${set.ruleName}\" is over threshold at ${gpm} gallons"
+    }
+    else if(set.type == "Continuous Flow")
+    {
+    	msg = "Water Flow Warning: \"${set.ruleName}\" is over threshold at ${gpm} minutes"
+    }
+    else
+    {
+    	msg = "Water Flow Warning: \"${set.ruleName}\" is over threshold at ${gpm}gpm"
+    }
+    log.debug(msg)
+    
+    // Only send notifications as often as the user specifies
+    def lastNotification = 0
+    if(state["notificationHistory${device}"])
+    {
+    	lastNotification = Date.parse("yyyy-MM-dd'T'HH:mm:ssZ", state["notificationHistory${device}"]).getTime()
+    }
+    def td = now() - lastNotification
+    log.debug("Last Notification at ${state["notificationHistory${device}"]}... ${td/(60*1000)} minutes")
+    if(td/(60*1000) > minutesBetweenNotifications.value)
+    {
+    	log.debug("Sending Notification")
+        if (pushNotification)
+        {
+            sendPush(msg)
+            state["notificationHistory${device}"] = new Date()
+        }
+        if (smsNotification)
+        {
+            sendSms(phone, msg)
+            state["notificationHistory${device}"] = new Date()
+        }
+    }
+}
+
+def getChildById(app)
+{
+	return childApps.find{ it.id == app }
+}
+
+def findIn(haystack, needle)
+{
+	def result = false
+	haystack.each { it ->
+    	//log.debug("findIn: ${it} <- ${needle}")
+    	if (needle == it)
+        {
+        	//log.debug("Found needle in haystack")
+        	result = true
+        }
+    }
+    return result
+}

smartapps/fortrezz/leak-detector.src/leak-detector.groovy

@@ -0,0 +1,243 @@
+/**
+ *  Leak Detector
+ *
+ *  Copyright 2016 Daniel Kurin
+ *
+ */
+definition(
+    name: "Leak Detector",
+    namespace: "fortrezz",
+    author: "FortrezZ, LLC",
+    description: "Child SmartApp for leak detector rules",
+    category: "Green Living",
+    parent: "fortrezz:FortrezZ Leak Detector",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	page(name: "prefsPage", title: "Choose the detector behavior", install: true, uninstall: true)
+
+    // Do something here like update a message on the screen,
+    // or introduce more inputs. submitOnChange will refresh
+    // the page and allow the user to see the changes immediately.
+    // For example, you could prompt for the level of the dimmers
+    // if dimmers have been selected:
+    //log.debug "Child Settings: ${settings}"
+}
+
+def prefsPage() {
+	def daysOfTheWeek = ["Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"]
+    dynamicPage(name: "prefsPage") {
+        section("Set Leak Threshold by...") {
+            input(name: "type", type: "enum", title: "Type...", submitOnChange: true, options: ruleTypes())
+        }
+
+        if(type)
+        {
+            switch (type) {
+                case "Mode":
+                    section("Threshold settings") {
+                        input(name: "ruleName", type: "text", title: "Rule Name", required: true)
+                        input(name: "gpm", type: "decimal", title: "GPM exceeds", required: true, defaultValue: 0.1)
+                    }
+                    section("Only in these modes") {
+                        input(name: "modes", type: "mode", title: "select a mode(s)", multiple: true, required: true)
+                    }
+                    section ("Action") {
+                    	input(name: "dev", type: "capability.actuator", title: "Choose a device to perform the action", required: false, submitOnChange: true)
+                        if (dev) {
+                        	input(name: "command", type: "enum", title: "Command...", submitOnChange: true, options: deviceCommands(dev))
+                    	}
+                    }
+                    break
+
+                case "Time Period":
+                    section("Threshold settings") {
+                        input(name: "ruleName", type: "text", title: "Rule Name", required: true)
+                        input(name: "gpm", type: "decimal", title: "GPM exceeds", required: true)
+                    }
+                    section("Between...") {
+                    	input(name: "startTime", type: "time", title: "Start Time", required: true)
+                    }
+                    section("...and...") {
+                    	input(name: "endTime", type: "time", title: "End Time", required: true)
+                    }
+                    section("Only on these days") {
+                    	input(name: "days", type: "enum", title: "Days of the week", required: false, options: daysOfTheWeek, multiple: true)
+                    }
+                    section("Only in these modes") {
+                    	input(name: "modes", type: "mode", title: "System Modes", required: false, multiple: true)
+                    }
+                    section ("Action") {
+                    	input(name: "dev", type: "capability.actuator", title: "Choose a device to perform the action", required: false, submitOnChange: true)
+                        if (dev) {
+                        	input(name: "command", type: "enum", title: "Command...", submitOnChange: true, options: deviceCommands(dev))
+                    	}
+                    }
+                    break
+
+                case "Accumulated Flow":
+                    section("Threshold settings") {
+                        input(name: "ruleName", type: "text", title: "Rule Name", required: true)
+                        input(name: "gallons", type: "number", title: "Total Gallons exceeds", required: true)
+                    }
+                    section("Between...") {
+                    	input(name: "startTime", type: "time", title: "Start Time", required: true)
+                    }
+                    section("...and...") {
+                    	input(name: "endTime", type: "time", title: "End Time", required: true)
+                    }
+                    section("Only on these days") {
+                    	input(name: "days", type: "enum", title: "Days of the week", required: false, options: daysOfTheWeek, multiple: true)
+                    }
+                    section("Only in these modes") {
+                    	input(name: "modes", type: "mode", title: "System Modes", required: false, multiple: true)
+                    }
+                    section ("Action") {
+                    	input(name: "dev", type: "capability.actuator", title: "Choose a device to perform the action", required: false, submitOnChange: true)
+                        if (dev) {
+                        	input(name: "command", type: "enum", title: "Command...", submitOnChange: true, options: deviceCommands(dev))
+                    	}
+                    }
+                    break
+
+                case "Continuous Flow":
+                    section("Threshold settings") {
+                        input(name: "ruleName", type: "text", title: "Rule Name", required: true)
+	                    input(name: "flowMinutes", type: "number", title: "Minutes of constant flow", required: true, defaultValue: 60)
+                    }
+                    section("Only in these modes") {
+                    	input(name: "modes", type: "mode", title: "System Modes", required: false, multiple: true)
+                    }
+                    section ("Action") {
+                    	input(name: "dev", type: "capability.actuator", title: "Choose a device to perform the action", required: false, submitOnChange: true)
+                        if (dev) {
+                        	input(name: "command", type: "enum", title: "Command...", submitOnChange: true, options: deviceCommands(dev))
+                    	}
+                    }
+                    break
+
+                case "Water Valve Status":
+                    section("Threshold settings") {
+                        input(name: "ruleName", type: "text", title: "Rule Name", required: true)
+                        input(name: "gpm", type: "decimal", title: "GPM exceeds", required: true, defaultValue: 0.1)
+                    }
+                    section ("While...") {
+                        input(name: "valve", type: "capability.valve", title: "Choose a valve", required: true)
+                    }
+                    section ("...is...") {
+                        input(name: "valveStatus", type: "enum", title: "Status", options: ["Open","Closed"], required: true)
+                    }
+                   break
+
+                case "Switch Status":
+                    section("Threshold settings") {
+                        input(name: "ruleName", type: "text", title: "Rule Name", required: true)
+                        input(name: "gpm", type: "decimal", title: "GPM exceeds", required: true, defaultValue: 0.1)
+                    }
+                    section ("If...") {
+                        input(name: "valve", type: "capability.switch", title: "Choose a switch", required: true)
+                    }
+                    section ("...is...") {
+                        input(name: "switchStatus", type: "enum", title: "Status", options: ["On","Off"], required: true)
+                    }
+                    break
+
+                default:
+                    break
+            }
+        }
+    }
+}
+
+def ruleTypes() {
+	def types = []
+    types << "Mode"
+    types << "Time Period"
+    types << "Accumulated Flow"
+    types << "Continuous Flow"
+    types << "Water Valve Status"
+    //types << "Switch Status"
+    
+    return types
+}
+
+def actionTypes() {
+	def types = []
+    types << [name: "Switch", capability: "capabilty.switch"]
+    types << [name: "Water Valve", capability: "capability.valve"]
+    
+    return types
+}
+
+def deviceCommands(dev)
+{
+	def cmds = []
+	dev.supportedCommands.each { command ->
+    	cmds << command.name
+    }
+    
+    return cmds
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	app.updateLabel("${ruleName ? ruleName : ""} - ${type}")
+    
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	app.updateLabel("${ruleName ? ruleName : ""} - ${type}")
+
+	unsubscribe()
+	initialize()
+}
+
+def settings() {
+	def set = settings
+    if (set["dev"] != null)
+    {
+    	log.debug("dev set: ${set.dev}")
+    	set.dev = set.dev.id
+    }
+    if (set["valve"] != null)
+    {
+    	log.debug("valve set: ${set.valve}")
+    	set.valve = set.valve.id
+    }
+    log.debug(set)
+	return set
+}
+
+def devAction(action)
+{
+	if(dev)
+    {
+    	log.debug("device: ${dev}, action: ${action}")
+		dev."${action}"()
+    }
+}
+
+def isValveStatus(status)
+{
+	def result = false
+    log.debug("Water Valve ${valve} has status ${valve.currentState("contact").value}, compared to ${status.toLowerCase()}")
+	if(valve)
+    {
+    	if(valve.currentState("contact").value == status.toLowerCase())
+        {
+        	result = true
+        }
+    }
+    return result
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers