MSA-2069: home auto

devicetypes/erocm123/sonoff-wifi-switch.src/sonoff-wifi-switch.groovy

@@ -0,0 +1,450 @@
+/**
+ *  Copyright 2016 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Sonoff Wifi Switch
+ *
+ *  Author: Eric Maycock (erocm123)
+ *  Date: 2016-06-02
+ */
+ 
+import groovy.json.JsonSlurper
+import groovy.util.XmlSlurper
+
+metadata {
+	definition (name: "Sonoff Wifi Switch", namespace: "erocm123", author: "Eric Maycock") {
+        capability "Actuator"
+		capability "Switch"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Configuration"
+        capability "Health Check"
+        
+        command "reboot"
+        
+        attribute   "needUpdate", "string"
+	}
+
+	simulator {
+	}
+    
+    preferences {
+        input description: "Once you change values on this page, the corner of the \"configuration\" icon will change orange until all configuration parameters are updated.", title: "Settings", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		generate_preferences(configuration_model())
+	}
+
+	tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "generic", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", backgroundColor:"#00a0dc", icon: "st.switches.switch.on", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", icon: "st.switches.switch.off", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", backgroundColor:"#00a0dc", icon: "st.switches.switch.off", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", icon: "st.switches.switch.on", nextState:"turningOn"
+			}
+        }
+
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("configure", "device.needUpdate", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "NO" , label:'', action:"configuration.configure", icon:"st.secondary.configure"
+            state "YES", label:'', action:"configuration.configure", icon:"https://github.com/erocm123/SmartThingsPublic/raw/master/devicetypes/erocm123/qubino-flush-1d-relay.src/configure@2x.png"
+        }
+        standardTile("reboot", "device.reboot", decoration: "flat", height: 2, width: 2, inactiveLabel: false) {
+            state "default", label:"Reboot", action:"reboot", icon:"", backgroundColor:"#ffffff"
+        }
+        valueTile("ip", "ip", width: 2, height: 1) {
+    		state "ip", label:'IP Address\r\n${currentValue}'
+		}
+        valueTile("uptime", "uptime", width: 2, height: 1) {
+    		state "uptime", label:'Uptime ${currentValue}'
+		}
+        
+    }
+
+	main(["switch"])
+	details(["switch",
+             "refresh","configure","reboot",
+             "ip", "uptime"])
+}
+
+def installed() {
+	log.debug "installed()"
+	configure()
+}
+
+def configure() {
+    logging("configure()", 1)
+    def cmds = []
+    cmds = update_needed_settings()
+    if (cmds != []) cmds
+}
+
+def updated()
+{
+    logging("updated()", 1)
+    def cmds = [] 
+    cmds = update_needed_settings()
+    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name:"needUpdate", value: device.currentValue("needUpdate"), displayed:false, isStateChange: true)
+    if (cmds != []) response(cmds)
+}
+
+private def logging(message, level) {
+    if (logLevel != "0"){
+    switch (logLevel) {
+       case "1":
+          if (level > 1)
+             log.debug "$message"
+       break
+       case "99":
+          log.debug "$message"
+       break
+    }
+    }
+}
+
+def parse(description) {
+	//log.debug "Parsing: ${description}"
+    def events = []
+    def descMap = parseDescriptionAsMap(description)
+    def body
+    //log.debug "descMap: ${descMap}"
+
+    if (!state.mac || state.mac != descMap["mac"]) {
+		log.debug "Mac address of device found ${descMap["mac"]}"
+        updateDataValue("mac", descMap["mac"])
+	}
+    
+    if (state.mac != null && state.dni != state.mac) state.dni = setDeviceNetworkId(state.mac)
+    if (descMap["body"]) body = new String(descMap["body"].decodeBase64())
+
+    if (body && body != "") {
+    
+    if(body.startsWith("{") || body.startsWith("[")) {
+    def slurper = new JsonSlurper()
+    def result = slurper.parseText(body)
+    
+    log.debug "result: ${result}"
+    
+    if (result.containsKey("type")) {
+        if (result.type == "configuration")
+            events << update_current_properties(result)
+    }
+    if (result.containsKey("power")) {
+        events << createEvent(name: "switch", value: result.power)
+    }
+    if (result.containsKey("uptime")) {
+        events << createEvent(name: "uptime", value: result.uptime, displayed: false)
+    }
+    } else {
+        //log.debug "Response is not JSON: $body"
+    }
+    }
+
+    if (!device.currentValue("ip") || (device.currentValue("ip") != getDataValue("ip"))) events << createEvent(name: 'ip', value: getDataValue("ip"))
+
+    return events
+}
+
+def parseDescriptionAsMap(description) {
+	description.split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+        
+        if (nameAndValue.length == 2) map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        else map += [(nameAndValue[0].trim()):""]
+	}
+}
+
+def on() {
+	log.debug "on()"
+    def cmds = []
+    cmds << getAction("/on")
+    return cmds
+}
+
+def off() {
+    log.debug "off()"
+	def cmds = []
+    cmds << getAction("/off")
+    return cmds
+}
+
+def refresh() {
+	log.debug "refresh()"
+    def cmds = []
+    cmds << getAction("/status")
+    return cmds
+}
+
+def ping() {
+    log.debug "ping()"
+    refresh()
+}
+
+private getAction(uri){ 
+  updateDNI()
+  def userpass
+  //log.debug uri
+  if(password != null && password != "") 
+    userpass = encodeCredentials("admin", password)
+    
+  def headers = getHeader(userpass)
+
+  def hubAction = new physicalgraph.device.HubAction(
+    method: "GET",
+    path: uri,
+    headers: headers
+  )
+  return hubAction    
+}
+
+private postAction(uri, data){ 
+  updateDNI()
+  
+  def userpass
+  
+  if(password != null && password != "") 
+    userpass = encodeCredentials("admin", password)
+  
+  def headers = getHeader(userpass)
+  
+  def hubAction = new physicalgraph.device.HubAction(
+    method: "POST",
+    path: uri,
+    headers: headers,
+    body: data
+  )
+  return hubAction    
+}
+
+private setDeviceNetworkId(ip, port = null){
+    def myDNI
+    if (port == null) {
+        myDNI = ip
+    } else {
+  	    def iphex = convertIPtoHex(ip)
+  	    def porthex = convertPortToHex(port)
+        myDNI = "$iphex:$porthex"
+    }
+    log.debug "Device Network Id set to ${myDNI}"
+    return myDNI
+}
+
+private updateDNI() { 
+    if (state.dni != null && state.dni != "" && device.deviceNetworkId != state.dni) {
+       device.deviceNetworkId = state.dni
+    }
+}
+
+private getHostAddress() {
+    if (override == "true" && ip != null && ip != ""){
+        return "${ip}:80"
+    }
+    else if(getDeviceDataByName("ip") && getDeviceDataByName("port")){
+        return "${getDeviceDataByName("ip")}:${getDeviceDataByName("port")}"
+    }else{
+	    return "${ip}:80"
+    }
+}
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02x', it.toInteger() ) }.join()
+    return hex
+}
+
+private String convertPortToHex(port) {
+	String hexport = port.toString().format( '%04x', port.toInteger() )
+    return hexport
+}
+
+private encodeCredentials(username, password){
+	def userpassascii = "${username}:${password}"
+    def userpass = "Basic " + userpassascii.encodeAsBase64().toString()
+    return userpass
+}
+
+private getHeader(userpass = null){
+    def headers = [:]
+    headers.put("Host", getHostAddress())
+    headers.put("Content-Type", "application/x-www-form-urlencoded")
+    if (userpass != null)
+       headers.put("Authorization", userpass)
+    return headers
+}
+
+def reboot() {
+	log.debug "reboot()"
+    def uri = "/reboot"
+    getAction(uri)
+}
+
+def sync(ip, port) {
+    def existingIp = getDataValue("ip")
+    def existingPort = getDataValue("port")
+    if (ip && ip != existingIp) {
+        updateDataValue("ip", ip)
+        sendEvent(name: 'ip', value: ip)
+    }
+    if (port && port != existingPort) {
+        updateDataValue("port", port)
+    }
+}
+
+def generate_preferences(configuration_model)
+{
+    def configuration = parseXml(configuration_model)
+   
+    configuration.Value.each
+    {
+        if(it.@hidden != "true" && it.@disabled != "true"){
+        switch(it.@type)
+        {   
+            case ["number"]:
+                input "${it.@index}", "number",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    range: "${it.@min}..${it.@max}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+            case "list":
+                def items = []
+                it.Item.each { items << ["${it.@value}":"${it.@label}"] }
+                input "${it.@index}", "enum",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}",
+                    options: items
+            break
+            case ["password"]:
+                input "${it.@index}", "password",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+            case "decimal":
+               input "${it.@index}", "decimal",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    range: "${it.@min}..${it.@max}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+            case "boolean":
+               input "${it.@index}", "boolean",
+                    title:"${it.@label}\n" + "${it.Help}",
+                    defaultValue: "${it.@value}",
+                    displayDuringSetup: "${it.@displayDuringSetup}"
+            break
+        }
+        }
+    }
+}
+
+ /*  Code has elements from other community source @CyrilPeponnet (Z-Wave Parameter Sync). */
+
+def update_current_properties(cmd)
+{
+    def currentProperties = state.currentProperties ?: [:]
+    currentProperties."${cmd.name}" = cmd.value
+
+    if (settings."${cmd.name}" != null)
+    {
+        if (settings."${cmd.name}".toString() == cmd.value)
+        {
+            sendEvent(name:"needUpdate", value:"NO", displayed:false, isStateChange: true)
+        }
+        else
+        {
+            sendEvent(name:"needUpdate", value:"YES", displayed:false, isStateChange: true)
+        }
+    }
+    state.currentProperties = currentProperties
+}
+
+
+def update_needed_settings()
+{
+    def cmds = []
+    def currentProperties = state.currentProperties ?: [:]
+     
+    def configuration = parseXml(configuration_model())
+    def isUpdateNeeded = "NO"
+    
+    cmds << getAction("/configSet?name=haip&value=${device.hub.getDataValue("localIP")}")
+    cmds << getAction("/configSet?name=haport&value=${device.hub.getDataValue("localSrvPortTCP")}")
+    
+    configuration.Value.each
+    {     
+        if ("${it.@setting_type}" == "lan" && it.@disabled != "true"){
+            if (currentProperties."${it.@index}" == null)
+            {
+               if (it.@setonly == "true"){
+                  logging("Setting ${it.@index} will be updated to ${it.@value}", 2)
+                  cmds << getAction("/configSet?name=${it.@index}&value=${it.@value}")
+               } else {
+                  isUpdateNeeded = "YES"
+                  logging("Current value of setting ${it.@index} is unknown", 2)
+                  cmds << getAction("/configGet?name=${it.@index}")
+               }
+            }
+            else if ((settings."${it.@index}" != null || it.@hidden == "true") && currentProperties."${it.@index}" != (settings."${it.@index}"? settings."${it.@index}".toString() : "${it.@value}"))
+            { 
+                isUpdateNeeded = "YES"
+                logging("Setting ${it.@index} will be updated to ${settings."${it.@index}"}", 2)
+                cmds << getAction("/configSet?name=${it.@index}&value=${settings."${it.@index}"}")
+            } 
+        }
+    }
+    
+    sendEvent(name:"needUpdate", value: isUpdateNeeded, displayed:false, isStateChange: true)
+    return cmds
+}
+
+def configuration_model()
+{
+'''
+<configuration>
+<Value type="password" byteSize="1" index="password" label="Password" min="" max="" value="" setting_type="preference" fw="">
+<Help>
+</Help>
+</Value>
+<Value type="list" byteSize="1" index="pos" label="Boot Up State" min="0" max="2" value="0" setting_type="lan" fw="">
+<Help>
+Default: Off
+</Help>
+    <Item label="Off" value="0" />
+    <Item label="On" value="1" />
+    <Item label="Previous" value="2" />
+</Value>
+<Value type="number" byteSize="1" index="autooff" label="Auto Off" min="0" max="65536" value="0" setting_type="lan" fw="">
+<Help>
+Automatically turn the switch off after this many seconds.
+Range: 0 to 65536
+Default: 0 (Disabled)
+</Help>
+</Value>
+<Value type="list" byteSize="1" index="switchtype" label="External Switch Type" min="0" max="1" value="0" setting_type="lan" fw="">
+<Help>
+If a switch is attached to GPIO 14.
+Default: Momentary
+</Help>
+    <Item label="Momentary" value="0" />
+    <Item label="Toggle" value="1" />
+</Value>
+<Value type="list" index="logLevel" label="Debug Logging Level?" value="0" setting_type="preference" fw="">
+<Help>
+</Help>
+    <Item label="None" value="0" />
+    <Item label="Reports" value="1" />
+    <Item label="All" value="99" />
+</Value>
+</configuration>
+'''
+}

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -1,5 +1,5 @@
 /**
- *  Spruce Sensor -updated with SLP model number 5/2017
+ *  Spruce Sensor -Pre-release V2 10/8/2015
  *
  *  Copyright 2014 Plaid Systems
  *
@@ -14,33 +14,25 @@
  *
  -------10/20/2015 Updates--------
  -Fix/add battery reporting interval to update
- -remove polling and/or refresh
- 
- -------5/2017 Updates--------
- -Add fingerprints for SLP
- -add device health, check every 60mins + 2mins
+ -remove polling and/or refresh(?)
  */
- 
 metadata {
-	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "Plaid Systems") {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
 		
 		capability "Configuration"
 		capability "Battery"
         capability "Relative Humidity Measurement"
         capability "Temperature Measurement"
         capability "Sensor"
-        capability "Health Check"
         //capability "Polling"
 		
         attribute "maxHum", "string"
         attribute "minHum", "string"        
         
-        
         command "resetHumidity"
         command "refresh"
         
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01", deviceJoinName: "Spruce Sensor"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-SLP1", deviceJoinName: "Spruce Sensor"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
 	}
 
 	preferences {
@@ -301,11 +293,6 @@ def setConfig(){
     sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
 }
 
-def installed(){
-	//check every 1 hour + 2mins
-    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-}
-
 //when device preferences are changed
 def updated(){	
     log.debug "device updated"
@@ -316,8 +303,6 @@ def updated(){
             sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
     	}
     }
-    //check every 1 hour + 2mins
-    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 //poll
@@ -410,4 +395,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -158,7 +158,7 @@ def generateEvent(Map results) {
 	if(results) {
 
 			def linkText = getLinkText(device)
-		def supportedThermostatModes = ["off"]
+		def supportedThermostatModes = []
 		def thermostatMode = null
 
 		results.each { name, value ->

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,8 +105,6 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -131,10 +129,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -203,8 +197,7 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,8 +111,6 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -137,10 +135,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -206,8 +200,7 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,9 +134,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
+
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -230,11 +229,6 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-
-	translateZoneStatus(zs)
-}
-
-private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -319,7 +313,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
+			zigbee.enrollResponse()
 
 	return refreshCmds
 }

devicetypes/smartthings/zigbee-button.src/README.md

@@ -28,8 +28,9 @@ Works with:
 
 ## Device Health
 
-ZigBee Button is marked offline only in the case when Hub is offline.
+SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
 
+* __722min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -13,8 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
-import groovy.json.JsonOutput
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
@@ -185,6 +183,13 @@ private Map parseNonIasButtonMessage(Map descMap){
     }
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    refresh()
+}
+
 def refresh() {
     log.debug "Refreshing Battery"
 
@@ -193,6 +198,8 @@ def refresh() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device (plus 2 mins lag time)
+    sendEvent(name: "checkInterval", value: 2 * 6 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     log.debug "Configuring Reporting, IAS CIE, and Bindings."
     def cmds = []
     if (device.getDataValue("model") == "3450-L") {
@@ -252,8 +259,6 @@ def updated() {
 }
 
 def initialize() {
-    // Arrival sensors only goes OFFLINE when Hub is off
-    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -58,7 +58,6 @@ metadata {
 def installed() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	response(refresh())
 }
 
 def updated() {

smartapps/erocm123/sonoff-connect.src/sonoff-connect.groovy

@@ -0,0 +1,409 @@
+/**
+ *  Copyright 2016 Eric Maycock
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Sonoff (Connect)
+ *
+ *  Author: Eric Maycock (erocm123)
+ *  Date: 2016-06-02
+ */
+
+definition(
+    name: "Sonoff (Connect)",
+    namespace: "erocm123",
+    author: "Eric Maycock (erocm123)",
+    description: "Service Manager for Sonoff switches",
+    category: "Convenience",
+    iconUrl:   "https://raw.githubusercontent.com/erocm123/SmartThingsPublic/master/smartapps/erocm123/sonoff-connect.src/sonoff-connect-icon.png",
+    iconX2Url: "https://raw.githubusercontent.com/erocm123/SmartThingsPublic/master/smartapps/erocm123/sonoff-connect.src/sonoff-connect-icon-2x.png",
+    iconX3Url: "https://raw.githubusercontent.com/erocm123/SmartThingsPublic/master/smartapps/erocm123/sonoff-connect.src/sonoff-connect-icon-3x.png"
+)
+
+preferences {
+	page(name: "mainPage")
+    page(name: "configurePDevice")
+    page(name: "deletePDevice")
+    page(name: "changeName")
+    page(name: "discoveryPage", title: "Device Discovery", content: "discoveryPage", refreshTimeout:5)
+    page(name: "addDevices", title: "Add Sonoff Switches", content: "addDevices")
+    page(name: "manuallyAdd")
+    page(name: "manuallyAddConfirm")
+    page(name: "deviceDiscovery")
+}
+
+def mainPage() {
+	dynamicPage(name: "mainPage", title: "Manage your Sonoff switches", nextPage: null, uninstall: true, install: true) {
+        section("Configure"){
+           href "deviceDiscovery", title:"Discover Devices", description:""
+           href "manuallyAdd", title:"Manually Add Device", description:""
+        }
+        section("Installed Devices"){
+            getChildDevices().sort({ a, b -> a["deviceNetworkId"] <=> b["deviceNetworkId"] }).each {
+                href "configurePDevice", title:"$it.label", description:"", params: [did: it.deviceNetworkId]
+            }
+        }
+    }
+}
+
+def configurePDevice(params){
+   if (params?.did || params?.params?.did) {
+      if (params.did) {
+         state.currentDeviceId = params.did
+         state.currentDisplayName = getChildDevice(params.did)?.displayName
+      } else {
+         state.currentDeviceId = params.params.did
+         state.currentDisplayName = getChildDevice(params.params.did)?.displayName
+      }
+   }  
+   if (getChildDevice(state.currentDeviceId) != null) getChildDevice(state.currentDeviceId).configure()
+   dynamicPage(name: "configurePDevice", title: "Configure Sonoff Switches created with this app", nextPage: null) {
+		section {
+            app.updateSetting("${state.currentDeviceId}_label", getChildDevice(state.currentDeviceId).label)
+            input "${state.currentDeviceId}_label", "text", title:"Device Name", description: "", required: false
+            href "changeName", title:"Change Device Name", description: "Edit the name above and click here to change it"
+        }
+        section {
+              href "deletePDevice", title:"Delete $state.currentDisplayName", description: ""
+        }
+   }
+}
+
+def manuallyAdd(){
+   dynamicPage(name: "manuallyAdd", title: "Manually add a Sonoff device", nextPage: "manuallyAddConfirm") {
+		section {
+			paragraph "This process will manually create a Sonoff device based on the entered IP address. The SmartApp needs to then communicate with the device to obtain additional information from it. Make sure the device is on and connected to your wifi network."
+            input "deviceType", "enum", title:"Device Type", description: "", required: false, options: ["Sonoff Wifi Switch","Sonoff TH Wifi Switch","Sonoff POW Wifi Switch","Sonoff Dual Wifi Switch","Sonoff 4CH Wifi Switch"]
+            input "ipAddress", "text", title:"IP Address", description: "", required: false 
+		}
+    }
+}
+
+def manuallyAddConfirm(){
+   if ( ipAddress =~ /^(?:[0-9]{1,3}\.){3}[0-9]{1,3}$/) {
+       log.debug "Creating Sonoff Wifi Switch with dni: ${convertIPtoHex(ipAddress)}:${convertPortToHex("80")}"
+       addChildDevice("erocm123", deviceType ? deviceType : "Sonoff Wifi Switch", "${convertIPtoHex(ipAddress)}:${convertPortToHex("80")}", location.hubs[0].id, [
+           "label": (deviceType ? deviceType : "Sonoff Wifi Switch") + " (${ipAddress})",
+           "data": [
+           "ip": ipAddress,
+           "port": "80" 
+           ]
+       ])
+   
+       app.updateSetting("ipAddress", "")
+            
+       dynamicPage(name: "manuallyAddConfirm", title: "Manually add a Sonoff device", nextPage: "mainPage") {
+		   section {
+			   paragraph "The device has been added. Press next to return to the main page."
+	    	}
+       }
+    } else {
+        dynamicPage(name: "manuallyAddConfirm", title: "Manually add a Sonoff device", nextPage: "mainPage") {
+		    section {
+			    paragraph "The entered ip address is not valid. Please try again."
+		    }
+        }
+    }
+}
+
+def deletePDevice(){
+    try {
+        unsubscribe()
+        deleteChildDevice(state.currentDeviceId)
+        dynamicPage(name: "deletePDevice", title: "Deletion Summary", nextPage: "mainPage") {
+            section {
+                paragraph "The device has been deleted. Press next to continue"
+            } 
+        }
+    
+	} catch (e) {
+        dynamicPage(name: "deletePDevice", title: "Deletion Summary", nextPage: "mainPage") {
+            section {
+                paragraph "Error: ${(e as String).split(":")[1]}."
+            } 
+        }
+    
+    }
+}
+
+def changeName(){
+    def thisDevice = getChildDevice(state.currentDeviceId)
+    thisDevice.label = settings["${state.currentDeviceId}_label"]
+
+    dynamicPage(name: "changeName", title: "Change Name Summary", nextPage: "mainPage") {
+	    section {
+            paragraph "The device has been renamed. Press \"Next\" to continue"
+        }
+    }
+}
+
+def discoveryPage(){
+   return deviceDiscovery()
+}
+
+def deviceDiscovery(params=[:])
+{
+	def devices = devicesDiscovered()
+    
+	int deviceRefreshCount = !state.deviceRefreshCount ? 0 : state.deviceRefreshCount as int
+	state.deviceRefreshCount = deviceRefreshCount + 1
+	def refreshInterval = 3
+    
+	def options = devices ?: []
+	def numFound = options.size() ?: 0
+
+	if ((numFound == 0 && state.deviceRefreshCount > 25) || params.reset == "true") {
+    	log.trace "Cleaning old device memory"
+    	state.devices = [:]
+        state.deviceRefreshCount = 0
+        app.updateSetting("selectedDevice", "")
+    }
+
+	ssdpSubscribe()
+
+	//sonoff discovery request every 15 //25 seconds
+	if((deviceRefreshCount % 5) == 0) {
+		discoverDevices()
+	}
+
+	//setup.xml request every 3 seconds except on discoveries
+	if(((deviceRefreshCount % 3) == 0) && ((deviceRefreshCount % 5) != 0)) {
+		verifyDevices()
+	}
+
+	return dynamicPage(name:"deviceDiscovery", title:"Discovery Started!", nextPage:"addDevices", refreshInterval:refreshInterval, uninstall: true) {
+		section("Please wait while we discover your Sonoff devices. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
+			input "selectedDevices", "enum", required:false, title:"Select Sonoff Switch (${numFound} found)", multiple:true, options:options
+		}
+        section("Options") {
+			href "deviceDiscovery", title:"Reset list of discovered devices", description:"", params: ["reset": "true"]
+		}
+	}
+}
+
+Map devicesDiscovered() {
+	def vdevices = getVerifiedDevices()
+	def map = [:]
+	vdevices.each {
+		def value = "${it.value.name}"
+		def key = "${it.value.mac}"
+		map["${key}"] = value
+	}
+	map
+}
+
+def getVerifiedDevices() {
+	getDevices().findAll{ it?.value?.verified == true }
+}
+
+private discoverDevices() {
+	sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:Basic:1", physicalgraph.device.Protocol.LAN))
+}
+
+def configured() {
+	
+}
+
+def buttonConfigured(idx) {
+	return settings["lights_$idx"]
+}
+
+def isConfigured(){
+   if(getChildDevices().size() > 0) return true else return false
+}
+
+def isVirtualConfigured(did){ 
+    def foundDevice = false
+    getChildDevices().each {
+       if(it.deviceNetworkId != null){
+       if(it.deviceNetworkId.startsWith("${did}/")) foundDevice = true
+       }
+    }
+    return foundDevice
+}
+
+private virtualCreated(number) {
+    if (getChildDevice(getDeviceID(number))) {
+        return true
+    } else {
+        return false
+    }
+}
+
+private getDeviceID(number) {
+    return "${state.currentDeviceId}/${app.id}/${number}"
+}
+
+def installed() {
+	initialize()
+}
+
+def updated() {
+	unsubscribe()
+    unschedule()
+	initialize()
+}
+
+def initialize() {
+    ssdpSubscribe()
+    runEvery5Minutes("ssdpDiscover")
+}
+
+void ssdpSubscribe() {
+    subscribe(location, "ssdpTerm.urn:schemas-upnp-org:device:Basic:1", ssdpHandler)
+}
+
+void ssdpDiscover() {
+    sendHubCommand(new physicalgraph.device.HubAction("lan discovery urn:schemas-upnp-org:device:Basic:1", physicalgraph.device.Protocol.LAN))
+}
+
+def ssdpHandler(evt) {
+    def description = evt.description
+    def hub = evt?.hubId
+    def parsedEvent = parseLanMessage(description)
+    parsedEvent << ["hub":hub]
+
+    def devices = getDevices()
+    
+    String ssdpUSN = parsedEvent.ssdpUSN.toString()
+    
+    if (devices."${ssdpUSN}") {
+        def d = devices."${ssdpUSN}"
+        def child = getChildDevice(parsedEvent.mac)
+        def childIP
+        def childPort
+        if (child) {
+            childIP = child.getDeviceDataByName("ip")
+            childPort = child.getDeviceDataByName("port").toString()
+            log.debug "Device data: ($childIP:$childPort) - reporting data: (${convertHexToIP(parsedEvent.networkAddress)}:${convertHexToInt(parsedEvent.deviceAddress)})."
+            if(childIP != convertHexToIP(parsedEvent.networkAddress) || childPort != convertHexToInt(parsedEvent.deviceAddress).toString()){
+               log.debug "Device data (${child.getDeviceDataByName("ip")}) does not match what it is reporting(${convertHexToIP(parsedEvent.networkAddress)}). Attempting to update."
+               child.sync(convertHexToIP(parsedEvent.networkAddress), convertHexToInt(parsedEvent.deviceAddress).toString())
+            }
+        }
+
+        if (d.networkAddress != parsedEvent.networkAddress || d.deviceAddress != parsedEvent.deviceAddress) {
+            d.networkAddress = parsedEvent.networkAddress
+            d.deviceAddress = parsedEvent.deviceAddress
+        }
+    } else {
+        devices << ["${ssdpUSN}": parsedEvent]
+    }
+}
+
+void verifyDevices() {
+    def devices = getDevices().findAll { it?.value?.verified != true }
+    devices.each {
+        def ip = convertHexToIP(it.value.networkAddress)
+        def port = convertHexToInt(it.value.deviceAddress)
+        String host = "${ip}:${port}"
+        sendHubCommand(new physicalgraph.device.HubAction("""GET ${it.value.ssdpPath} HTTP/1.1\r\nHOST: $host\r\n\r\n""", physicalgraph.device.Protocol.LAN, host, [callback: deviceDescriptionHandler]))
+    }
+}
+
+def getDevices() {
+    state.devices = state.devices ?: [:]
+}
+
+void deviceDescriptionHandler(physicalgraph.device.HubResponse hubResponse) {
+	log.trace "description.xml response (application/xml)"
+	def body = hubResponse.xml
+    log.debug body?.device?.friendlyName?.text()
+	if (body?.device?.modelName?.text().startsWith("Sonoff")) {
+		def devices = getDevices()
+		def device = devices.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (device) {
+			device.value << [name:body?.device?.friendlyName?.text() + " (" + convertHexToIP(hubResponse.ip) + ")", serialNumber:body?.device?.serialNumber?.text(), verified: true]
+		} else {
+			log.error "/description.xml returned a device that didn't exist"
+		}
+	}
+}
+
+def addDevices() {
+    def devices = getDevices()
+    def sectionText = ""
+
+    selectedDevices.each { dni ->bridgeLinking
+        def selectedDevice = devices.find { it.value.mac == dni }
+        def d
+        if (selectedDevice) {
+            d = getChildDevices()?.find {
+                it.deviceNetworkId == selectedDevice.value.mac
+            }
+        }
+
+        if (!d) {
+            log.debug selectedDevice
+            log.debug "Creating Sonoff Switch with dni: ${selectedDevice.value.mac}"
+
+            def deviceHandlerName
+            if (selectedDevice?.value?.name?.startsWith("Sonoff TH"))
+                deviceHandlerName = "Sonoff TH Wifi Switch"
+            else if (selectedDevice?.value?.name?.startsWith("Sonoff POW"))
+                deviceHandlerName = "Sonoff POW Wifi Switch"
+            else if (selectedDevice?.value?.name?.startsWith("Sonoff Dual"))
+                deviceHandlerName = "Sonoff Dual Wifi Switch"
+            else if (selectedDevice?.value?.name?.startsWith("Sonoff 4CH"))
+                deviceHandlerName = "Sonoff 4CH Wifi Switch"
+            else 
+                deviceHandlerName = "Sonoff Wifi Switch"
+            def newDevice = addChildDevice("erocm123", deviceHandlerName, selectedDevice.value.mac, selectedDevice?.value.hub, [
+                "label": selectedDevice?.value?.name ?: "Sonoff Wifi Switch",
+                "data": [
+                    "mac": selectedDevice.value.mac,
+                    "ip": convertHexToIP(selectedDevice.value.networkAddress),
+                    "port": "" + Integer.parseInt(selectedDevice.value.deviceAddress,16)
+                ]
+            ])
+            sectionText = sectionText + "Succesfully added Sonoff device with ip address ${convertHexToIP(selectedDevice.value.networkAddress)} \r\n"
+        }
+        
+	} 
+    log.debug sectionText
+        return dynamicPage(name:"addDevices", title:"Devices Added", nextPage:"mainPage",  uninstall: true) {
+        if(sectionText != ""){
+		section("Add Sonoff Results:") {
+			paragraph sectionText
+		}
+        }else{
+        section("No devices added") {
+			paragraph "All selected devices have previously been added"
+		}
+        }
+}
+    }
+
+def uninstalled() {
+    unsubscribe()
+    getChildDevices().each {
+        deleteChildDevice(it.deviceNetworkId)
+    }
+}
+
+
+
+private String convertHexToIP(hex) {
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+private String convertIPtoHex(ipAddress) { 
+    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02x', it.toInteger() ) }.join()
+    return hex
+}
+
+private String convertPortToHex(port) {
+	String hexport = port.toString().format( '%04x', port.toInteger() )
+    return hexport
+}

smartapps/rboy/5-2-day-thermostat.src/5-2-day-thermostat.groovy

@@ -1,470 +0,0 @@
-/* **DISCLAIMER**
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * Without limitation of the foregoing, Contributors/Regents expressly does not warrant that:
- * 1. the software will meet your requirements or expectations;
- * 2. the software or the software content will be free of bugs, errors, viruses or other defects;
- * 3. any results, output, or data provided through or generated by the software will be accurate, up-to-date, complete or reliable;
- * 4. the software will be compatible with third party software;
- * 5. any errors in the software will be corrected.
- * The user assumes all responsibility for selecting the software and for the results obtained from the use of the software. The user shall bear the entire risk as to the quality and the performance of the software.
- */ 
- 
-/**
- *  5-2 Day Thermostat
- *
- * Base code from mwoodengr@hotmail.com, bugfixed and enhanced by RBoy
- * Changes Copyright RBoy, redistribution of any changes or modified code is not allowed without permission
- * Version 2.1.0
- * 2015-10-3 - Fixed an issue with selecting multiple thermostats and for recent platform changes
- * 2015-5-17 - Added ability to select mutiple thermostats simultaneously
- * 2015-2-11 - Fixed issue with fan mode
- *
- */
-definition(
-		name: "5-2 Day Thermostat",
-		namespace: "rboy",
-		author: "RBoy",
-		description: "Weekday and Weekend Thermostat",
-    	category: "Green Living",
-    	iconUrl: "https://s3.amazonaws.com/smartapp-icons/GreenLiving/Cat-GreenLiving.png",
-    	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/GreenLiving/Cat-GreenLiving@2x.png",
-    	iconX3Url: "https://s3.amazonaws.com/smartapp-icons/GreenLiving/Cat-GreenLiving@3x.png")
-
-preferences {
-	section("Choose thermostat (s)") {
-		input "thermostats", "capability.thermostat", required: true, multiple:true
-	}
-
-    section("Switch HVAC mode (auto to cool/heat) based on the outside temperature (optional)") {
-		input "temperatureSensor", "capability.temperatureMeasurement", required: false
-		input "temperatureH", "number", title: "Switch to heating temperature", required: false, description: "Temperature below which switch to heat mode"
-		input "temperatureC", "number", title: "Switch to cooling temperature", required: false, description: "Temperature above which switch to cool mode"
-	}
-
-	section("Monday to Friday Schedule") {
-		input "time1", "time", title: "Wake Time", required: true
-		input "tempSetpoint1", "number", title: "Wake Heat Temp", required: true
-		input "tempSetpointA", "number", title: "Wake Cool Temp", required: true
-		input "time2", "time", title: "Leave Time", required: true
-		input "tempSetpoint2", "number", title: "Leave Heat Temp", required: true
-		input "tempSetpointB", "number", title: "Leave Cool Temp", required: true
-		input "time3", "time", title: "Return Time", required: true
-		input "tempSetpoint3", "number", title: "Return Heat Temp", required: true
-		input "tempSetpointC", "number", title: "Return Cool Temp", required: true
-		input "time4", "time", title: "Sleep Time", required: true
-		input "tempSetpoint4", "number", title: "Sleep Heat Temp", required: true
-		input "tempSetpointD", "number", title: "Sleep Cool Temp", required: true
-	}
-	section("Saturday and Sunday Schedule") {
-		input "time11", "time", title: "Wake Time", required: true
-		input "tempSetpoint11", "number", title: "Wake Heat Temp", required: true
-		input "tempSetpointAA", "number", title: "Wake Cool Temp", required: true
-		input "time21", "time", title: "Leave Time", required: true
-		input "tempSetpoint21", "number", title: "Leave Heat Temp", required: true
-		input "tempSetpointBB", "number", title: "Leave Cool Temp", required: true
-		input "time31", "time", title: "Return Time", required: true
-		input "tempSetpoint31", "number", title: "Return Heat Temp", required: true
-		input "tempSetpointCC", "number", title: "Return Cool Temp", required: true
-		input "time41", "time", title: "Sleep Time", required: true
-		input "tempSetpoint41", "number", title: "Sleep Heat Temp", required: true
-		input "tempSetpointDD", "number", title: "Sleep Cool Temp", required: true
-	}
-}
-
-def installed()
-{
-	subscribeToEvents()
-}
-
-def updated()
-{
-    unsubscribe()
-	subscribeToEvents()
-}
-
-def subscribeToEvents() {
-	subscribe(temperatureSensor, "temperature", temperatureHandler)
-    subscribe(location, modeChangeHandler)
-
-    initialize()
-}
-
-// Handle mode changes, reinitialize the current temperature and timers after a mode change, this is to workaround the issue of the last timer firing while in a non running mode, resume operations when supported modes are set
-def modeChangeHandler(evt) {
-	log.debug "Reinitializing thermostats on mode change notification, new mode $evt.value"
-	//sendNotificationEvent("$thermostats Reinitializing on mode change notification, new mode $evt.value")
-    initialize()
-}
-
-// This section sets the HVAC mode based outside temperature. HVAC fan mode is set to "auto".
-def temperatureHandler(evt) {
-	log.debug "Heat mode switch temperature $temperatureH, cool mode switch temperature $temperatureC"
-    
-	if (temperatureH == null || temperatureC == null) { // We are in Auto mode or user doesn't want us to switch modes
-		return
-	}
-	
-    thermostats.each { thermostat ->
-        def extTemp = temperatureSensor.currentTemperature
-        log.debug "External temperature is: $extTemp"
-        def thermostatState = thermostat.currentThermostatMode
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "HVAC current mode $thermostatState"
-        log.debug "HVAC Fan current mode $thermostatFan"
-        if (extTemp < temperatureH) {
-            if (thermostatState == "cool") {
-                def hvacmode = "heat"
-                thermostat.setThermostatMode(hvacmode)
-                log.debug "HVAC mode set to $hvacmode"
-            }
-        }
-        else if (extTemp > temperatureC) {
-            if (thermostatState == "heat") {
-                def hvacmode = "cool"
-                thermostat.setThermostatMode(hvacmode)
-                log.debug "HVAC mode set to $hvacmode"
-            }
-        }
-
-        if (thermostatFan != "fanAuto") {
-            thermostat.setThermostatFanMode("auto")
-            log.debug "HVAC fan mode set to auto"
-        }
-    }
-}
-
-// This section determines which day it is.
-def initialize() {
-	log.trace "Initialized with $settings"
-
-	unschedule()
-	def calendar = Calendar.getInstance()
-	calendar.setTimeZone(location.timeZone)
-	def today = calendar.get(Calendar.DAY_OF_WEEK)
-   	def timeNow = now()
-	def midnightToday = timeToday("2000-01-01T23:59:59.999-0000", location.timeZone)
-   	log.debug("Current time is ${(new Date(timeNow)).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-	log.debug("Midnight today is ${midnightToday.format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-   	log.trace("Weekday schedule1 ${timeToday(time1, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekday schedule2 ${timeToday(time2, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekday schedule3 ${timeToday(time3, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekday schedule4 ${timeToday(time4, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekend schedule1 ${timeToday(time11, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekend schedule2 ${timeToday(time21, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekend schedule3 ${timeToday(time31, location.timeZone).format("HH:mm z", location.timeZone)}")
-   	log.trace("Weekend schedule4 ${timeToday(time41, location.timeZone).format("HH:mm z", location.timeZone)}")
-
-	// This section is where the time/temperature schedule is set
-	switch (today) {
-		case Calendar.MONDAY:
-		case Calendar.TUESDAY:
-		case Calendar.WEDNESDAY:
-		case Calendar.THURSDAY:
-        	if (timeNow >= timeToday(time1, location.timeZone).time && timeNow < timeToday(time2, location.timeZone).time) { // Are we between 1st time and 2nd time
-        		changeTemp1()
-            	schedule(timeToday(time2, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time2, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time2, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-        	}
-        	else if (timeNow >= timeToday(time2, location.timeZone).time && timeNow < timeToday(time3, location.timeZone).time) { // Are we between 2nd time and 3rd time
-            	changeTemp2()
-				schedule(timeToday(time3, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time3, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time3, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time3, location.timeZone).time && timeNow < timeToday(time4, location.timeZone).time) { // Are we between 3rd time and 4th time
-            	changeTemp3()
-				schedule(timeToday(time4, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time4, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time4, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time4, location.timeZone).time && timeNow < midnightToday.time) { // Are we between 4th time and midnight, schedule next day
-            	changeTemp4()
-				schedule(timeToday(time1, location.timeZone) + 1, initialize)
-                log.info("$thermostats Scheduled next adjustment for ${(timeToday(time1, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${(timeToday(time1, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= (midnightToday - 1).time && timeNow < timeToday(time1, location.timeZone).time) { // Are we between midnight yesterday and 1st time, schedule today
-            	changeTemp4()
-				schedule(timeToday(time1, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time1, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time1, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-			break
-			
-		case Calendar.FRIDAY:
-        	if (timeNow >= timeToday(time1, location.timeZone).time && timeNow < timeToday(time2, location.timeZone).time) { // Are we between 1st time and 2nd time
-        		changeTemp1()
-            	schedule(timeToday(time2, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time2, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time2, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-        	}
-        	else if (timeNow >= timeToday(time2, location.timeZone).time && timeNow < timeToday(time3, location.timeZone).time) { // Are we between 2nd time and 3rd time
-            	changeTemp2()
-				schedule(timeToday(time3, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time3, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time3, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time3, location.timeZone).time && timeNow < timeToday(time4, location.timeZone).time) { // Are we between 3rd time and 4th time
-            	changeTemp3()
-				schedule(timeToday(time4, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time4, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time4, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time4, location.timeZone).time && timeNow < midnightToday.time) { // Are we between 4th time Friday and midnight, we schedule Saturday
-            	changeTemp4()
-				schedule(timeToday(time11, location.timeZone) + 1, initialize)
-                log.info("$thermostats Scheduled next adjustment for ${(timeToday(time11, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${(timeToday(time11, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= (midnightToday - 1).time && timeNow < timeToday(time11, location.timeZone).time) { // Are we between midnight Friday and 1st time on Saturday, we schedule Saturday
-            	changeTemp4()
-				schedule(timeToday(time11, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time11, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time11, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-			break
-
-		case Calendar.SATURDAY:
-            if (timeNow >= timeToday(time11, location.timeZone).time && timeNow < timeToday(time21, location.timeZone).time) { // Are we between 1st time and 2nd time
-        		changeTemp11()
-            	schedule(timeToday(time21, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time21, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time21, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-        	}
-        	else if (timeNow >= timeToday(time21, location.timeZone).time && timeNow < timeToday(time31, location.timeZone).time) { // Are we between 2nd time and 3rd time
-            	changeTemp21()
-				schedule(timeToday(time31, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time31, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time31, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time31, location.timeZone).time && timeNow < timeToday(time41, location.timeZone).time) { // Are we between 3rd time and 4th time
-            	changeTemp31()
-				schedule(timeToday(time41, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time41, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time41, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time41, location.timeZone).time && timeNow < midnightToday.time) { // Are we between 4th time and midnight, schedule the next day
-            	changeTemp41()
-				schedule(timeToday(time11, location.timeZone) + 1, initialize)
-                log.info("$thermostats Scheduled next adjustment for ${(timeToday(time11, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${(timeToday(time11, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= (midnightToday - 1).time && timeNow < timeToday(time11, location.timeZone).time) { // Are we between midnight yesterday and 1st time, schedule today
-            	changeTemp41()
-				schedule(timeToday(time11, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time11, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time11, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-			break
-            
-		case Calendar.SUNDAY:
-            if (timeNow >= timeToday(time11, location.timeZone).time && timeNow < timeToday(time21, location.timeZone).time) { // Are we between 1st time and 2nd time
-        		changeTemp11()
-            	schedule(timeToday(time21, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time21, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time21, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-        	}
-        	else if (timeNow >= timeToday(time21, location.timeZone).time && timeNow < timeToday(time31, location.timeZone).time) { // Are we between 2nd time and 3rd time
-            	changeTemp21()
-				schedule(timeToday(time31, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time31, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time31, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time31, location.timeZone).time && timeNow < timeToday(time41, location.timeZone).time) { // Are we between 3rd time and 4th time
-            	changeTemp31()
-				schedule(timeToday(time41, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time41, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time41, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= timeToday(time41, location.timeZone).time && timeNow < midnightToday.time) { // Are we between 4th time Sunday and midnight, we schedule Monday
-            	changeTemp41()
-				schedule(timeToday(time1, location.timeZone) + 1, initialize)
-                log.info("$thermostats Scheduled next adjustment for ${(timeToday(time1, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${(timeToday(time1, location.timeZone) + 1).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-            else if (timeNow >= (midnightToday - 1).time && timeNow < timeToday(time1, location.timeZone).time) { // Are we between midnight Sunday and 1st time on Monday, we schedule Monday
-            	changeTemp41()
-				schedule(timeToday(time1, location.timeZone), initialize)
-                log.info("$thermostats Scheduled next adjustment for ${timeToday(time1, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-                //sendNotificationEvent("$thermostats Scheduled next adjustment for ${timeToday(time1, location.timeZone).format("EEE MMM dd yyyy HH:mm z", location.timeZone)}")
-            }
-			break
-	}
-}
-
-// This section is where the thermostat temperature settings are set. 
-def changeTemp1() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint1)
-            thermostat.setCoolingSetpoint(tempSetpointA)
-            log.info "Set $thermostat Heat $tempSetpoint1°, Cool $tempSetpointA°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint1)
-            log.info "Set $thermostat Heat $tempSetpoint1°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointA)
-            log.info "Set $thermostat Cool $tempSetpointA°"
-        }
-    }
-}
-
-def changeTemp2() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint2)
-            thermostat.setCoolingSetpoint(tempSetpointB)
-            log.info "Set $thermostat Heat $tempSetpoint2°, Cool $tempSetpointB°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint2)
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointB)
-        }
-    }
-}
-
-def changeTemp3() {
-    thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint3)
-            thermostat.setCoolingSetpoint(tempSetpointC)
-            log.info "Set $thermostat Heat $tempSetpoint3°, Cool $tempSetpointC°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint3)
-            log.info "Set $thermostat Heat $tempSetpoint3°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointC)
-            log.info "Set $thermostat Cool $tempSetpointC°"
-        }
-    }
-}
-
-def changeTemp4() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint4)
-            thermostat.setCoolingSetpoint(tempSetpointD)
-            log.info "Set $thermostat Heat $tempSetpoint4°, Cool $tempSetpointD°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint4)
-            log.info "Set $thermostat Heat $tempSetpoint4°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointD)
-            log.info "Set $thermostat Cool $tempSetpointD°"
-        }
-    }
-}
-
-def changeTemp11() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint11)
-            thermostat.setCoolingSetpoint(tempSetpointAA)
-            log.info "Set $thermostat Heat $tempSetpoint11°, Cool $tempSetpointAA°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint11)
-            log.info "Set $thermostat Heat $tempSetpoint11°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointAA)
-            log.info "Set $thermostat Cool $tempSetpointAA°"
-        }
-    }
-}
-
-def changeTemp21() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint21)
-            thermostat.setCoolingSetpoint(tempSetpointBB)
-            log.info "Set $thermostat Heat $tempSetpoint21°, Cool $tempSetpointBB°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint21)
-            log.info "Set $thermostat Heat $tempSetpoint21°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointBB)
-            log.info "Set $thermostat Cool $tempSetpointBB°"
-        }
-    }
-}
-
-def changeTemp31() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint31)
-            thermostat.setCoolingSetpoint(tempSetpointCC)
-            log.info "Set $thermostat Heat $tempSetpoint31°, Cool $tempSetpointCC°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint31)
-            log.info "Set $thermostat Heat $tempSetpoint31°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointCC)
-            log.info "Set $thermostat Cool $tempSetpointCC°"
-        }
-    }
-}
-
-def changeTemp41() {
-	thermostats.each { thermostat ->
-        def thermostatState = thermostat.currentThermostatMode
-        log.debug "Thermostat mode = $thermostatState"
-        def thermostatFan = thermostat.currentThermostatFanMode
-        log.debug "Thermostat fan = $thermostatFan"
-        if (thermostatState == "auto") {
-            thermostat.setHeatingSetpoint(tempSetpoint41)
-            thermostat.setCoolingSetpoint(tempSetpointDD)
-            log.info "Set $thermostat Heat $tempSetpoint41°, Cool $tempSetpointDD°"
-        }
-        else if (thermostatState == "heat") {
-            thermostat.setHeatingSetpoint(tempSetpoint41)
-            log.info "Set $thermostat Heat $tempSetpoint41°"
-        }
-        else {
-            thermostat.setCoolingSetpoint(tempSetpointDD)
-            log.info "Set $thermostat Cool $tempSetpointDD°"
-        }
-    }
-}

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,9 +27,10 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	for (def i=1; i<=8; i++) {
-		page(name: "configureButton$i")
-	}
+	page(name: "configureButton1")
+	page(name: "configureButton2")
+	page(name: "configureButton3")
+	page(name: "configureButton4")
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -59,45 +60,22 @@ def selectButton() {
 	}
 }
 
-def createPage(pageNum) {
-	if ((state.numButton == pageNum) || (pageNum == 8))
-		state.installCondition = true
-	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
-			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
-}
-
 def configureButton1() {
-	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
-	log.debug "state variable numButton: ${state.numButton}"
-	state.installCondition = false
-	createPage(1)
+	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
+		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
 }
 def configureButton2() {
-	createPage(2)
+	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
+		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
 }
 
 def configureButton3() {
-	createPage(3)
+	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
+		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
 }
-
 def configureButton4() {
-	createPage(4)
-}
-
-def configureButton5() {
-	createPage(5)
-}
-
-def configureButton6() {
-	createPage(6)
-}
-
-def configureButton7() {
-	createPage(7)
-}
-
-def configureButton8() {
-	createPage(8)
+	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
+		install: true, uninstall: true, getButtonSections(4))
 }
 
 def getButtonSections(buttonNumber) {

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -202,8 +202,7 @@ def inputSelectionPage() {
 
         section("options variations") {
             paragraph "tap these elements and look at the differences when selecting an option"
-            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", options: ["Thing 1", "Thing 2", "(Complicated) Thing 3"])
-            input(type: "enum", name: "selectionSimpleGrouped", title: "Simple (Grouped) options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
             input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
         }
 
@@ -215,15 +214,15 @@ def inputSelectionPage() {
 
         section("segmented") {
             paragraph "segmented should only work if there are either 2 or 3 options to choose from"
-            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", options: ["One"])
-            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", options: ["One", "Two", "Three", "Four"])
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
 
             paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
             input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
             input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
 
             paragraph "specifying defaultValue still works with segmented selection elements"
-            input(type: "enum", name: "selectionSegmentedWithDefault", style: "segmented", title: "defaulted to 'two'", options: ["One", "Two", "Three"], defaultValue: "Two")
+            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
         }
 
         section("required: true") {
@@ -232,8 +231,6 @@ def inputSelectionPage() {
 
         section("multiple: true") {
             input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
-            input(type: "enum", name: "selectionMultipleDefault1", title: "This allows multiple selections with a single default", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: "an option")
-            input(type: "enum", name: "selectionMultipleDefault2", title: "This allows multiple selections with multiple defaults", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: ["an option", "another option"])
         }
 
         section("with image") {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -72,7 +72,7 @@ def authPage() {
 		log.debug "have LIFX access token"
 
 		def options = locationOptions() ?: []
-		def count = options.size().toString()
+		def count = options.size()
 
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {