MSA-2096: For use with sump pump z-wave module. Allows battery backup sump pump systems made by Glentronics, inc to send alert notifications through Z-wave to the SmartThings user.

devicetypes/fortrezz/fortrezz-flow-meter-interface.src/fortrezz-flow-meter-interface.groovy

@@ -1,439 +0,0 @@
-/**
- *  FortrezZ Flow Meter Interface
- *
- *  Copyright 2016 FortrezZ, LLC
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "FortrezZ Flow Meter Interface", namespace: "fortrezz", author: "Daniel Kurin") {
-		capability "Battery"
-		capability "Energy Meter"
-		capability "Image Capture"
-		capability "Temperature Measurement"
-        capability "Sensor"
-        capability "Water Sensor"
-        
-        attribute "gpm", "number"
-        attribute "cumulative", "number"
-        attribute "alarmState", "string"
-        attribute "chartMode", "string"
-        attribute "lastThreshhold", "number"
-
-        
-        command "chartMode"
-        command "zero"
-        command "setHighFlowLevel", ["number"]
-
-	    fingerprint deviceId: "0x2101", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x73, 0x71, 0x85, 0x59, 0x32, 0x31, 0x70, 0x80, 0x7A"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-    
-    preferences {
-       input "gallonThreshhold", "decimal", title: "High Flow Rate Threshhold", description: "Flow rate (in gpm) that will trigger a notification.", defaultValue: 5, required: false, displayDuringSetup: true
-       input("registerEmail", type: "email", required: false, title: "Email Address", description: "Register your device with FortrezZ", displayDuringSetup: true)
-    }
-
-	tiles(scale: 2) {
-    	carouselTile("flowHistory", "device.image", width: 6, height: 3) { }
-		valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}%\nBattery', unit:""
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-            state("temperature", label:'${currentValue}°',
-                backgroundColors:[
-                    [value: 31, color: "#153591"],
-                    [value: 44, color: "#1e9cbb"],
-                    [value: 59, color: "#90d2a7"],
-                    [value: 74, color: "#44b621"],
-                    [value: 84, color: "#f1d801"],
-                    [value: 95, color: "#d04e00"],
-                    [value: 96, color: "#bc2323"]
-                ]
-            )
-        }
-        valueTile("gpm", "device.gpm", inactiveLabel: false, width: 2, height: 2) {
-			state "gpm", label:'${currentValue}gpm', unit:""
-		}
-		standardTile("powerState", "device.powerState", width: 2, height: 2) { 
-			state "reconnected", icon:"http://swiftlet.technology/wp-content/uploads/2016/02/Connected-64.png", backgroundColor:"#cccccc"
-			state "disconnected", icon:"http://swiftlet.technology/wp-content/uploads/2016/02/Disconnected-64.png", backgroundColor:"#cc0000"
-			state "batteryReplaced", icon:"http://swiftlet.technology/wp-content/uploads/2016/04/Full-Battery-96.png", backgroundColor:"#cccccc"
-			state "noBattery", icon:"http://swiftlet.technology/wp-content/uploads/2016/04/No-Battery-96.png", backgroundColor:"#cc0000"
-		}
-		standardTile("waterState", "device.waterState", width: 2, height: 2, canChangeIcon: true) {
-			state "none", icon:"http://cdn.device-icons.smartthings.com/Weather/weather12-icn@2x.png", backgroundColor:"#cccccc", label: "No Flow"
-			state "flow", icon:"http://cdn.device-icons.smartthings.com/Weather/weather12-icn@2x.png", backgroundColor:"#53a7c0", label: "Flow"
-			state "overflow", icon:"http://cdn.device-icons.smartthings.com/Weather/weather12-icn@2x.png", backgroundColor:"#cc0000", label: "High Flow"
-		}
-		standardTile("heatState", "device.heatState", width: 2, height: 2) {
-			state "normal", label:'Normal', icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
-			state "freezing", label:'Freezing', icon:"st.alarm.temperature.freeze", backgroundColor:"#2eb82e"
-			state "overheated", label:'Overheated', icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
-		}
-        standardTile("take1", "device.image", width: 2, height: 2, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false, decoration: "flat") {
-            state "take", label: "", action: "Image Capture.take", nextState:"taking", icon: "st.secondary.refresh"
-        }
-		standardTile("chartMode", "device.chartMode", width: 2, height: 2, canChangeIcon: false, canChangeBackground: false, decoration: "flat") {
-			state "day", label:'24 Hours\n(press to change)', nextState: "week", action: 'chartMode'
-			state "week", label:'7 Days\n(press to change)', nextState: "month", action: 'chartMode'
-			state "month", label:'4 Weeks\n(press to change)', nextState: "day", action: 'chartMode'
-		}
-		valueTile("zeroTile", "device.zero", width: 2, height: 2, canChangeIcon: false, canChangeBackground: false, decoration: "flat") {
-			state "zero", label:'Zero', action: 'zero'
-		}
-		main (["waterState"])
-		details(["flowHistory", "chartMode", "take1", "temperature", "gpm", "waterState", "battery"])
-	}
-    
-}
-
-// parse events into attributes
-def parse(String description) {
-	def results = []
-	if (description.startsWith("Err")) {
-	    results << createEvent(descriptionText:description, displayed:true)
-	} else {
-		def cmd = zwave.parse(description, [ 0x80: 1, 0x84: 1, 0x71: 2, 0x72: 1 ])
-		if (cmd) {
-			results << createEvent( zwaveEvent(cmd) )
-		}
-	}
-	//log.debug "\"$description\" parsed to ${results.inspect()}"
-    if(gallonThreshhold != device.currentValue("lastThreshhold"))
-    {
-    	results << setThreshhold(gallonThreshhold)
-    }
-	log.debug "zwave parsed to ${results.inspect()}"
-	return results
-}
-
-def updated()
-{
-	log.debug("Updated")
-}
-
-def setHighFlowLevel(level)
-{
-	setThreshhold(level)
-}
-
-def take() {
-	def mode = device.currentValue("chartMode")
-    if(mode == "day")
-    {
-    	take1()
-    }
-    else if(mode == "week")
-    {
-    	take7()
-    }
-    else if(mode == "month")
-    {
-    	take28()
-    }
-}
-
-def chartMode(string) {
-	log.debug("ChartMode")
-	def state = device.currentValue("chartMode")
-    def tempValue = ""
-	switch(state)
-    {
-    	case "day":
-        	tempValue = "week"
-            break
-        
-        case "week":
-        	tempValue = "month"
-            break
-            
-        case "month":
-        	tempValue = "day"
-            break
-            
-        default:
-        	tempValue = "day"
-            break
-    }
-	sendEvent(name: "chartMode", value: tempValue)
-    take()
-}
-
-def take1() {
-    api("24hrs", "") {
-        log.debug("Image captured")
-
-        if(it.headers.'Content-Type'.contains("image/png")) {
-            if(it.data) {
-                storeImage(getPictureName("24hrs"), it.data)
-            }
-        }
-    }
-}
-
-def take7() {
-    api("7days", "") {
-        log.debug("Image captured")
-
-        if(it.headers.'Content-Type'.contains("image/png")) {
-            if(it.data) {
-                storeImage(getPictureName("7days"), it.data)
-            }
-        }
-    }
-}
-
-def take28() {
-    api("4weeks", "") {
-        log.debug("Image captured")
-
-        if(it.headers.'Content-Type'.contains("image/png")) {
-            if(it.data) {
-                storeImage(getPictureName("4weeks"), it.data)
-            }
-        }
-    }
-}
-
-def zero()
-{
-	delayBetween([
-		zwave.meterV3.meterReset().format(),
-        zwave.meterV3.meterGet().format(),
-        zwave.firmwareUpdateMdV2.firmwareMdGet().format(),
-    ], 100)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
-{
-	log.debug cmd
-	def map = [:]
-	if(cmd.sensorType == 1) {
-		map = [name: "temperature"]
-        if(cmd.scale == 0) {
-        	map.value = getTemperature(cmd.scaledSensorValue)
-        } else {
-	        map.value = cmd.scaledSensorValue
-        }
-        map.unit = location.temperatureScale
-	} /* else if(cmd.sensorType == 2) {
-    	map = [name: "waterState"]
-        if(cmd.sensorValue[0] == 0x80) {
-        	map.value = "flow"
-            sendEvent(name: "water", value: "dry")
-        } else if(cmd.sensorValue[0] == 0x00) {
-	        map.value = "none"
-            sendEvent(name: "water", value: "dry")
-        } else if(cmd.sensorValue[0] == 0xFF) {
-	        map.value = "overflow"
-            sendEvent(name: "water", value: "wet")
-            sendAlarm("waterOverflow")
-        }
-	} */
-	return map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd)
-{
-	def map = [:]
-    map.name = "gpm"
-    def delta = cmd.scaledMeterValue - cmd.scaledPreviousMeterValue
-    if (delta < 0 || delta > 10000) {
-        log.error(cmd)
-    	delta = 0
-    }
-
-    map.value = delta
-    map.unit = "gpm"
-    sendDataToCloud(delta)
-    sendEvent(name: "cumulative", value: cmd.scaledMeterValue, displayed: false, unit: "gal")
-	return map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
-{
-	def map = [:]
-    if (cmd.zwaveAlarmType == 8) // Power Alarm
-    {
-    	map.name = "powerState" // For Tile (shows in "Recently")
-        if (cmd.zwaveAlarmEvent == 2) // AC Mains Disconnected
-        {
-            map.value = "disconnected"
-            sendAlarm("acMainsDisconnected")
-        }
-        else if (cmd.zwaveAlarmEvent == 3) // AC Mains Reconnected
-        {
-            map.value = "reconnected"
-            sendAlarm("acMainsReconnected")
-        }
-        else if (cmd.zwaveAlarmEvent == 0x0B) // Replace Battery Now
-        {
-            map.value = "noBattery"
-            sendAlarm("replaceBatteryNow")
-        }
-        else if (cmd.zwaveAlarmEvent == 0x00) // Battery Replaced
-        {
-            map.value = "batteryReplaced"
-            sendAlarm("batteryReplaced")
-        }
-    }
-    else if (cmd.zwaveAlarmType == 4) // Heat Alarm
-    {
-    	map.name = "heatState"
-        if (cmd.zwaveAlarmEvent == 0) // Normal
-        {
-            map.value = "normal"
-        }
-        else if (cmd.zwaveAlarmEvent == 1) // Overheat
-        {
-            map.value = "overheated"
-            sendAlarm("tempOverheated")
-        }
-        else if (cmd.zwaveAlarmEvent == 5) // Underheat
-        {
-            map.value = "freezing"
-            sendAlarm("tempFreezing")
-        }
-    }
-    else if (cmd.zwaveAlarmType == 5) // Water Alarm
-    {
-    	map.name = "waterState"
-        if (cmd.zwaveAlarmEvent == 0) // Normal
-        {
-            map.value = "none"
-            sendEvent(name: "water", value: "dry")
-        }
-        else if (cmd.zwaveAlarmEvent == 6) // Flow Detected
-        {
-        	if(cmd.eventParameter[0] == 2)
-            {
-                map.value = "flow"
-                sendEvent(name: "water", value: "dry")
-            }
-            else if(cmd.eventParameter[0] == 3)
-            {
-            	map.value = "overflow"
-                sendAlarm("waterOverflow")
-                sendEvent(name: "water", value: "wet")
-            }
-        }
-    }
-    //log.debug "alarmV2: $cmd"
-    
-	return map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [:]
-	if(cmd.batteryLevel == 0xFF) {
-		map.name = "battery"
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.displayed = true
-	} else {
-		map.name = "battery"
-		map.value = cmd.batteryLevel > 0 ? cmd.batteryLevel.toString() : 1
-		map.unit = "%"
-		map.displayed = false
-	}
-	return map
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd)
-{
-	log.debug "COMMAND CLASS: $cmd"
-}
-
-def sendDataToCloud(double data)
-{
-    def params = [
-        uri: "https://iot.swiftlet.technology",
-        path: "/fortrezz/post.php",
-        body: [
-            id: device.id,
-            value: data,
-            email: registerEmail
-        ]
-    ]
-
-	//log.debug("POST parameters: ${params}")
-    try {
-        httpPostJson(params) { resp ->
-            resp.headers.each {
-                //log.debug "${it.name} : ${it.value}"
-            }
-            log.debug "sendDataToCloud query response: ${resp.data}"
-        }
-    } catch (e) {
-        log.debug "something went wrong: $e"
-    }
-}
-
-def getTemperature(value) {
-	if(location.temperatureScale == "C"){
-		return value
-    } else {
-        return Math.round(celsiusToFahrenheit(value))
-    }
-}
-
-private getPictureName(category) {
-  //def pictureUuid = device.id.toString().replaceAll('-', '')
-  def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
-
-  def name = "image" + "_$pictureUuid" + "_" + category + ".png"
-  return name
-}
-
-def api(method, args = [], success = {}) {
-  def methods = [
-    //"snapshot":        [uri: "http://${ip}:${port}/snapshot.cgi${login()}&${args}",        type: "post"],
-    "24hrs":      [uri: "https://iot.swiftlet.technology/fortrezz/chart.php?uuid=${device.id}&tz=${location.timeZone.ID}&type=1", type: "get"],
-    "7days":      [uri: "https://iot.swiftlet.technology/fortrezz/chart.php?uuid=${device.id}&tz=${location.timeZone.ID}&type=2", type: "get"],
-    "4weeks":     [uri: "https://iot.swiftlet.technology/fortrezz/chart.php?uuid=${device.id}&tz=${location.timeZone.ID}&type=3", type: "get"],
-  ]
-
-  def request = methods.getAt(method)
-
-  return doRequest(request.uri, request.type, success)
-}
-
-private doRequest(uri, type, success) {
-  log.debug(uri)
-
-  if(type == "post") {
-    httpPost(uri , "", success)
-  }
-
-  else if(type == "get") {
-    httpGet(uri, success)
-  }
-}
-
-def sendAlarm(text)
-{
-	sendEvent(name: "alarmState", value: text, descriptionText: text, displayed: false)
-}
-
-def setThreshhold(rate)
-{
-	log.debug "Setting Threshhold to ${rate}"
-    
-    def event = createEvent(name: "lastThreshhold", value: rate, displayed: false)
-    def cmds = []
-    cmds << zwave.configurationV2.configurationSet(configurationValue: [(int)Math.round(rate*10)], parameterNumber: 5, size: 1).format()
-    sendEvent(event)
-    return response(cmds) // return a list containing the event and the result of response()
-}

devicetypes/fortrezz/sump-pump-controller.src/sump-pump-controller.groovy

@@ -0,0 +1,167 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Sump Pump Controller", namespace: "fortrezz", author: "FortrezZ, LLC") {
+		capability "Sensor"
+
+		attribute "alarmState", "string"
+        attribute "powerAlert", "number"
+        attribute "sumpAlert", "number"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x5A,0x85,0x59,0x73,0x20,0x7A,0x71"
+	}
+
+	simulator {
+		status "replace battery now": "command: 7105, payload: 00 00 00 FF 08 0B 00 00"
+		status "battery fully charged": "command: 7105, payload: 00 00 00 FF 08 0D 00 00"
+		status "AC mains disconnected": "command: 7105, payload: 00 00 00 FF 08 02 00 00"
+		status "AC mains reconnected": "command: 7105, payload: 00 00 00 FF 08 03 00 00"
+		status "Excess Pumping": "command: 7105, payload: 00 00 00 FF 09 03 01 01 00"
+		status "Float Error": "command: 7105, payload: 00 00 00 FF 09 03 01 02 00"
+		status "General Error": "command: 7105, payload: 00 00 00 FF 09 01 00 00"
+	}
+
+	tiles (scale: 2){
+		multiAttributeTile(name:"alert", type: "lighting", width: 6, height: 4){
+			tileAttribute ("device.alarm", key: "PRIMARY_CONTROL") {
+				attributeState("clear", label:"clear", icon:"http://swiftlet.technology/wp-content/uploads/2016/04/Ok-96.png", backgroundColor:"#ffffff")
+                attributeState("alert", label:"Alert!", icon:"http://swiftlet.technology/wp-content/uploads/2016/04/Error-96.png", backgroundColor:"#ff5b5b")
+			}
+		}
+		main "alert"
+		details(["alert"])
+	}
+}
+
+def parse(String description) {
+	def results = []
+	if (description.startsWith("Err")) {
+	    results << createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [ 0x80: 1, 0x84: 1, 0x71: 2, 0x72: 1 ])
+		if (cmd) {
+			zwaveEvent(cmd, results)
+		}
+	}
+	log.debug "\"$description\" parsed to ${results.inspect()}"
+	return results
+}
+
+
+// Notification Report from SPM
+def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
+    def powerAlert = device.currentValue("powerAlert")
+    if (powerAlert == null)
+    {
+    	powerAlert = 0
+    }
+    def sumpAlert = device.currentValue("sumpAlert")
+    if (sumpAlert == null)
+    {
+    	sumpAlert = 0
+    }
+
+if (cmd.zwaveAlarmType == 8) {
+    	if (cmd.zwaveAlarmEvent == 2) {
+        	results << createEvent(name: "alarmState", value: "acMainsDisconnected", descriptionText: "AC Mains Disconnected")
+            powerAlert = powerAlert + 1
+        } else if (cmd.zwaveAlarmEvent == 3) {
+        	results << createEvent(name: "alarmState", value: "acMainsReconnected", descriptionText: "AC Mains Reconnected")
+            powerAlert = powerAlert - 1
+        } else if (cmd.zwaveAlarmEvent == 11) {
+        	results << createEvent(name: "alarmState", value: "replaceBatteryNow", descriptionText: "Replace AA batteries in Z-wave module")
+            powerAlert = powerAlert + 1
+        } else if (cmd.zwaveAlarmEvent == 13) {
+        	results << createEvent(name: "alarmState", value: "batteryFullyCharged", descriptionText: "AA Batteries Replaced")
+            powerAlert = powerAlert - 1
+        }
+        
+        if (powerAlert < 0)
+        {
+        	powerAlert = 0
+        }
+	} else if (cmd.zwaveAlarmType == 9) {
+    	if (cmd.zwaveAlarmEvent == 1) {
+        	results << createEvent(name: "alarmState", value: "systemHardwareFailure", descriptionText: "Sump Pump Error, refer to Sump Pump Controller Unit")
+            sumpAlert = sumpAlert + 1
+        } else if (cmd.zwaveAlarmEvent == 3) {
+			if (cmd.eventParameter[0] == 0) {
+            	results << createEvent(name: "alarmState", value: "alarmClear", descriptionText: "Alarm has been cleared")
+                sumpAlert = 0
+            } else if (cmd.eventParameter[0] == 1) {
+            	results << createEvent(name: "alarmState", value: "floatError", descriptionText: "Pump or float problem")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 2) {
+            	results << createEvent(name: "alarmState", value: "backupPumpActivated", descriptionText: "Backup pump was activated")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 3) {
+            	results << createEvent(name: "alarmState", value: "highWater", descriptionText: "High water alarm")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 4) {
+            	results << createEvent(name: "alarmState", value: "addWater", descriptionText: "Add distilled water to the battery")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 5) {
+            	results << createEvent(name: "alarmState", value: "backupPumpError", descriptionText: "Backup pump is defective or not connected")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 6) {
+            	results << createEvent(name: "alarmState", value: "9VBatteryLow", descriptionText: "9 volt battery is low or slide switch is OFF")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 7) {
+            	results << createEvent(name: "alarmState", value: "12VBatteryError", descriptionText: "Problem with backup sump pump battery")
+	            sumpAlert = sumpAlert + 1
+            } else if (cmd.eventParameter[0] == 8) {
+            	results << createEvent(name: "alarmState", value: "checkCable", descriptionText: "Check your cable connection (to Z-wave module)")
+	            sumpAlert = sumpAlert + 1
+            }
+		}
+
+		if (sumpAlert < 0)
+        {
+        	sumpAlert = 0
+        }
+	}
+    
+    if ((sumpAlert > 0) || (powerAlert > 0))
+    {
+    	sendEvent(name: "alarm", value: "alert", displayed: false)
+    }
+    else
+    {
+    	sendEvent(name: "alarm", value: "clear", displayed: false)
+    }
+    results
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
+	results << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "$device.displayName battery is low!"
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	results << createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd, results) {
+	def event = [ displayed: false ]
+	event.linkText = device.label ?: device.name
+	event.descriptionText = "$event.linkText: $cmd"
+	results << createEvent(event)
+}

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -27,9 +27,13 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor 6 is polled by the hub.
-Aeon MultiSensor reports in once every hour.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
 
-* __122min__ checkInterval
+* __32min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -130,13 +130,13 @@ metadata {
 }
 
 def installed(){
-// Device-Watch simply pings if no device events received for 122min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 122min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -171,8 +171,8 @@ private Map getBatteryResult(rawValue) {
 			def pct = batteryMap[volts]
 			result.value = pct
 		} else {
-			def minVolts = 2.4
-			def maxVolts = 2.7
+			def minVolts = 2.1
+			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -274,7 +274,7 @@ private Map getBatteryResult(rawValue) {
 			result.value = pct
 		} else {
 			def minVolts = 2.1
-			def maxVolts = 2.7
+			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -15,9 +15,10 @@ metadata {
 	definition (name: "Z-Wave Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Temperature Measurement"
+		capability "Relative Humidity Measurement"
 		capability "Thermostat"
 		capability "Configuration"
-		capability "Refresh"
+		capability "Polling"
 		capability "Sensor"
 		capability "Health Check"
 		
@@ -116,7 +117,7 @@ metadata {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
 		}
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action:"polling.poll", icon:"st.secondary.refresh"
 		}
 		main "temperature"
 		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
@@ -124,20 +125,13 @@ metadata {
 }
 
 def installed(){
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format()))
-	initialize()
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated(){
-	initialize()
-}
-
-def initialize() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	unschedule()
-	runEvery5Minutes("refresh")
-	refresh()
 }
 
 def parse(String description)
@@ -155,7 +149,6 @@ def parse(String description)
 		]
 		if (map.name == "thermostatMode") {
 			state.lastTriedMode = map.value
-			map.data = [supportedThermostatModes:state.supportedThermostatModes]
 			if (map.value == "cool") {
 				map2.value = device.latestValue("coolingSetpoint")
 				log.info "THERMOSTAT, latest cooling setpoint = ${map2.value}"
@@ -179,7 +172,6 @@ def parse(String description)
 		}
 	} else if (map.name == "thermostatFanMode" && map.isStateChange) {
 		state.lastTriedFanMode = map.value
-		map.data = [supportedThermostatFanModes: state.supportedThermostatFanModes]
 	}
 	log.debug "Parse returned $result"
 	result
@@ -313,26 +305,26 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
-	def supportedModes = []
-	if(cmd.off) { supportedModes << "off" }
-	if(cmd.heat) { supportedModes << "heat" }
-	if(cmd.cool) { supportedModes << "cool" }
-	if(cmd.auto) { supportedModes << "auto" }
-	if(cmd.auxiliaryemergencyHeat) { supportedModes << "emergency heat" }
+	def supportedModes = ""
+	if(cmd.off) { supportedModes += "off " }
+	if(cmd.heat) { supportedModes += "heat " }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergency heat " }
+	if(cmd.cool) { supportedModes += "cool " }
+	if(cmd.auto) { supportedModes += "auto " }
 
-	state.supportedThermostatModes = supportedModes
-	sendEvent(name: "supportedThermostatModes", value: supportedModes, displayed: false)
+	state.supportedModes = supportedModes
+	// No events to be generated, return empty map
 	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
-	def supportedFanModes = []
-	if(cmd.auto) { supportedFanModes << "auto" } // "fanAuto "
-	if(cmd.circulation) { supportedFanModes << "circulate" } // "fanCirculate"
-	if(cmd.low) { supportedFanModes << "on" } // "fanOn"
+	def supportedFanModes = ""
+	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
+	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
+	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
 
-	state.supportedThermostatFanModes = supportedFanModes
-	sendEvent(name: "supportedThermostatFanModes", value: supportedFanModes, displayed: false)
+	state.supportedFanModes = supportedFanModes
+	// No events to be generated, return empty map
 	return [:]
 }
 
@@ -345,17 +337,15 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 // Command Implementations
-def refresh() {
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format())
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format())
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
-	cmds << new physicalgraph.device.HubAction(zwave.sensorMultilevelV2.sensorMultilevelGet().format()) // current temperature
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format())
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
-	sendHubCommand(cmds)
+def poll() {
+	delayBetween([
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
+	], 2300)
 }
 
 def quickSetHeat(degrees) {
@@ -426,14 +416,28 @@ def ping() {
 	poll()
 }
 
+def configure() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
+		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
+	], 2300)
+}
+
 def modes() {
-	return state.supportedThermostatModes
+	["off", "heat", "cool", "auto", "emergency heat"]
 }
 
 def switchMode() {
 	def currentMode = device.currentState("thermostatMode")?.value
-	def lastTriedMode = state.lastTriedMode ?: currentMode ?: ["off"]
-	def supportedModes = getDataByName("supportedThermostatModes")
+	def lastTriedMode = state.lastTriedMode ?: currentMode ?: "off"
+	def supportedModes = getDataByName("supportedModes")
 	def modeOrder = modes()
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
@@ -450,7 +454,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-	def supportedModes = getDataByName("supportedThermostatModes")
+	def supportedModes = getDataByName("supportedModes")
 	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
@@ -462,9 +466,9 @@ def switchToMode(nextMode) {
 
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
-	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: ["off"]
-	def supportedModes = getDataByName("supportedThermostatFanModes") ?: ["auto", "on"]
-	def modeOrder = state.supportedThermostatFanModes
+	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
+	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
+	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
 	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
@@ -474,7 +478,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-	def supportedFanModes = getDataByName("supportedThermostatFanModes")
+	def supportedFanModes = getDataByName("supportedFanModes")
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand