MSA-631: Astralink's Panic button is use for elderly who in distress

It only have pressed event

devicetypes/astralink/panic-button.src/panic-button.groovy

@@ -0,0 +1,104 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Panic Button", namespace: "astralink", author: "SmartThings") {
+		capability "Button"
+		capability "Battery"
+	}
+
+	simulator {
+		status "button 1 pushed":  "command: 2001, payload: 01"
+		status "button 1 held":  "command: 2001, payload: 15"
+		status "button 2 pushed":  "command: 2001, payload: 29"
+		status "button 2 held":  "command: 2001, payload: 3D"
+		status "button 3 pushed":  "command: 2001, payload: 51"
+		status "button 3 held":  "command: 2001, payload: 65"
+		status "button 4 pushed":  "command: 2001, payload: 79"
+		status "button 4 held":  "command: 2001, payload: 8D"
+		status "wakeup":  "command: 8407, payload: "
+	}
+	tiles {
+		standardTile("button", "device.button", width: 2, height: 2) {
+			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
+		}
+		main "button"
+		details(["button"])
+	}
+}
+
+def parse(String description) {
+	def results = []
+	if (description.startsWith("Err")) {
+	    results = createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [0x2B: 1, 0x80: 1, 0x84: 1])
+		if(cmd) results += zwaveEvent(cmd)
+		if(!results) results = [ descriptionText: cmd, displayed: false ]
+	}
+	log.debug("Parsed '$description' to $results")
+	return results
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
+	def results = [createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)]
+
+    results += configurationCmds().collect{ response(it) }
+	results << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+
+	return results
+}
+
+def buttonEvent(button, pushed) {
+	button = button as Integer
+	if (pushed) {
+		createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
+	} else {
+		createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sceneactivationv1.SceneActivationSet cmd) {
+	Integer button = ((cmd.sceneId + 1) / 2) as Integer
+	Boolean pushed = !(cmd.sceneId % 2)
+	buttonEvent(button, pushed)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	Integer button = (cmd.value / 40 + 1) as Integer
+	Boolean pushed = (button * 40 - cmd.value) <= 20
+	buttonEvent(button, pushed)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	[ descriptionText: "$device.displayName: $cmd", linkText:device.displayName, displayed: false ]
+}
+
+def configurationCmds() {
+	def cmds = []
+	def hubId = zwaveHubNodeId
+	(1..4).each { button ->
+		cmds << zwave.configurationV1.configurationSet(parameterNumber: 240+button, scaledConfigurationValue: 1).format()
+	}
+	(1..4).each { button ->
+		cmds << zwave.configurationV1.configurationSet(parameterNumber: (button-1)*40, configurationValue: [hubId, (button-1)*40 + 1, 0, 0]).format()
+		cmds << zwave.configurationV1.configurationSet(parameterNumber: (button-1)*40 + 20, configurationValue: [hubId, (button-1)*40 + 21, 0, 0]).format()
+	}
+	cmds
+}
+
+def configure() {
+	def cmds = configurationCmds()
+	log.debug("Sending configuration: $cmds")
+	return cmds
+}

smartapps/richardneville/leave-home-secure.src/leave-home-secure.groovy

@@ -1,142 +0,0 @@
-definition (
-        name: "Leave home secure",
-        namespace: "richardneville",
-        author: "Richard Neville",
-        description: "Tells us if the doors and windows are open when we go out.",
-        category: "My Apps",
-        iconUrl: "http://animl.co.uk/img/SmartThingsLeaveHomeSecure.png",
-        iconX2Url: "http://animl.co.uk/img/SmartThingsLeaveHomeSecure@2x.png",
-        iconX3Url: "http://animl.co.uk/img/SmartThingsLeaveHomeSecure@2x.png"
-        )
-
-preferences {
-    section("Things to report on") {
-        input "contactSensorThings", "capability.contactSensor", required: true, multiple: true, 
-            title: "Select which things to watch:"
-        paragraph "This SmartApp reports if the doors and windows are left open when we go out. The report can be triggered in various ways. v0.1"
-    }
-    section("Things to trigger the report") {
-        input "presenceThings", "capability.presenceSensor", required: false, multiple: true,
-            title: "Notify when these things leave home:"
-        input "contactSensorTrigger", "capability.contactSensor", required: false, multiple: true,
-            title: "Notify when this thing closes:"
-        input "motionSensorThing", "capability.motionSensor", required: false, multiple: true,
-            title: "Notify when movement is detected near this thing:"
-    }
-    section("Settings") {
-        input "fullReport", "bool", title: "Full report, even if things are closed?", required: false
-        input "pushNotification", "bool", title: "Push the message out?", required: false
-        input("recipients", "contact", title: "Send messages to:") {
-            input "phone", "phone", title: "Send an SMS to:", description: "Phone Number", required: false
-        }
-        paragraph "(If no recipients are selected, app will just send a push notification instead.)"
-    }
-}
-
-def installed() {
-    initialize()
-}
-
-def updated() {
-	unsubscribe()
-    initialize()
-}
-
-def initialize() {
-    subscribe(presenceThings, "presence", presenceHandler)
-    subscribe(contactSensorTrigger, "contact", contactHandler)
-    subscribe(motionSensorThing, "motion", motionHandler)
-    
-    /*
-    subscribe(switchThing, "switch", switchHandler)
-    */
-}
-
-def presenceHandler(evt) {
-    if (evt.value == "not present") {
-        if (allThingsLeftHome()) {
-            checkIfHouseSecure()
-	    }
-    }
-}
-
-def contactHandler(evt) {
-	if (evt.value == "closed") {
-        checkIfHouseSecure()
-    }
-}
-
-def motionHandler(evt) {
-    if (evt.value == "active") {
-    	// motion detected
-        checkIfHouseSecure()
-    } else if (evt.value == "inactive") {
-        // motion stopped
-    }
-}
-
-/*
-def switchHandler(evt) {
-	if (debugMode) {
-        checkIfHouseSecure()
-    }
-}
-*/
-
-private checkIfHouseSecure() {
-    for (contactSensorThing in contactSensorThings) {
-        def sensorState = contactSensorThing.currentState("contact").value
-        if (sensorState == "open" || fullReport) {
-            sendMsg("${contactSensorThing.displayName} is ${sensorState}.")
-        }
-    }
-}
-
-private allThingsLeftHome() {
-    def result = true
-    for (presenceThing in presenceThings) {
-        if (presenceThing.currentPresence == "present") {
-            // someone is present, so set result to false and terminate the loop.
-            result = false
-            break
-        }
-    }
-    return result
-}
-
-private sendMsg(msg) {
-    if (pushNotification) {
-        // check that contact book is enabled and recipients selected
-        if (location.contactBookEnabled && recipients) {
-            sendNotificationToContacts(msg, recipients)
-        } else if (phone) { // check that the user did select a phone number
-            sendNotificationEvent("SMS sent to ${phone}")
-            sendSms(phone, msg)
-            //sendNotification(msg, [method: "phone", phone: "1234567890"])
-        } else {
-            sendPush(msg)
-        }
-    } else {
-        sendNotificationEvent(msg)
-    }
-}
-
-/*
-
-def switchHandler(evt) {
-    if (evt.value == "on") {
-        //sendPush("The ${switchThing.displayName} is on!")
-    } else if (evt.value == "off") {
-        //sendPush("The ${switchThing.displayName} is off!")
-    }
-}
-
-def contactHandler(evt) {
-    if (evt.value == "open") {
-        // contactSensor open
-    } else if (evt.value == "closed") {
-        // contactSensor closed
-    }
-}
-
-*/

smartapps/tslagle13/routine-director.src/routine-director.groovy

@@ -50,7 +50,7 @@ preferences {
         }
         section("Send Notifications?") {
             input("recipients", "contact", title: "Send notifications to") {
-                input "phone", "phone", title: "Send an SMS to this number?", required:false
+                input "phone", "phone", title: "Send an SMS to this number?"
             }
         }
 
@@ -266,9 +266,7 @@ def sendAway(msg) {
         }
         else {
         	sendPush(msg)
-        	if(phone){
-            		sendSms(phone, msg)
-        	}	
+            sendSms(phone, msg)
         }    
     }
 
@@ -282,9 +280,7 @@ def sendHome(msg) {
         }
         else {
         	sendPush(msg)
-                if(phone){
-            		sendSms(phone, msg)
-        	}
+            sendSms(phone, msg)
         }    
     }
 
@@ -343,4 +339,4 @@ private getTimeIntervalLabel() {
 
 private hideOptionsSection() {
     (starting || ending || days || modes) ? false: true
-}
+}