MSA-613: Controls turning on and off devices based on a temperature range and also a date range. I specificially use it to control a heating coil on the roof . I need it turned on if the temp goes above 30 degrees, and again off if the temp gets too high. Also only between the months of dec and april.

2026-03-09 13:21:53 +00:00 · 2015-10-10 11:02:48 -05:00
15 changed files with 462 additions and 1539 deletions
--- a/devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy
+++ b/devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy
@@ -43,7 +43,7 @@ metadata {
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
 			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
--- a/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
+++ b/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
@@ -55,136 +55,141 @@ metadata {
 			}
 		}

-		standardTile("indicator", "device.indicatorStatus", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("indicator", "device.indicatorStatus", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
 			state "when on", action:"indicator.indicatorNever", icon:"st.indicators.lit-when-on"
 			state "never", action:"indicator.indicatorWhenOff", icon:"st.indicators.never-lit"
 		}
-
-		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}

 		main(["switch"])
-		details(["switch", "level", "indicator", "refresh"])
-
+		details(["switch", "refresh", "indicator"])
 	}
 }

 def parse(String description) {
-	def result = null
-	if (description != "updated") {
-		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
+	def item1 = [
+		canBeCurrentState: false,
+		linkText: getLinkText(device),
+		isStateChange: false,
+		displayed: false,
+		descriptionText: description,
+		value:  description
+	]
+	def result
+	def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+	if (cmd) {
+		result = createEvent(cmd, item1)
 	}
-	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
-		result = [result, response(zwave.basicV1.basicGet())]
-		log.debug "Was hailed: requesting state update"
-	} else {
-		log.debug "Parse returned ${result?.descriptionText}"
+	else {
+		item1.displayed = displayed(description, item1.isStateChange)
+		result = [item1]
 	}
-	return result
+	log.debug "Parse returned ${result?.descriptionText}"
+	result
 }

-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
-	dimmerEvents(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
-	dimmerEvents(cmd)
-}
-
-private dimmerEvents(physicalgraph.zwave.Command cmd) {
-	def value = (cmd.value ? "on" : "off")
-	def result = [createEvent(name: "switch", value: value)]
-	if (cmd.value && cmd.value <= 100) {
-		result << createEvent(name: "level", value: cmd.value, unit: "%")
+def createEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "physical"
 	}
-	return result
+	result
 }

+def createEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "physical"
+	}
+	result
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStartLevelChange cmd, Map item1) {
+	[]
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd, Map item1) {
+	[response(zwave.basicV1.basicGet())]
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "physical"
+	}
+	result
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	result[0].descriptionText = "${item1.linkText} is ${item1.value}"
+	result[0].handlerName = cmd.value ? "statusOn" : "statusOff"
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "digital"
+	}
+	result
+}
+
+def doCreateEvent(physicalgraph.zwave.Command cmd, Map item1) {
+	def result = [item1]
+
+	item1.name = "switch"
+	item1.value = cmd.value ? "on" : "off"
+	item1.handlerName = item1.value
+	item1.descriptionText = "${item1.linkText} was turned ${item1.value}"
+	item1.canBeCurrentState = true
+	item1.isStateChange = isStateChange(device, item1.name, item1.value)
+	item1.displayed = item1.isStateChange
+
+	if (cmd.value >= 5) {
+		def item2 = new LinkedHashMap(item1)
+		item2.name = "level"
+		item2.value = cmd.value as String
+		item2.unit = "%"
+		item2.descriptionText = "${item1.linkText} dimmed ${item2.value} %"
+		item2.canBeCurrentState = true
+		item2.isStateChange = isStateChange(device, item2.name, item2.value)
+		item2.displayed = false
+		result << item2
+	}
+	result
+}

 def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
-	log.debug "ConfigurationReport $cmd"
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	createEvent([name: "indicatorStatus", value: value])
+	[name: "indicatorStatus", value: value, display: false]
 }

-def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
-	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
+def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
+	// Handles any Z-Wave commands we aren't interested in
+	log.debug "UNHANDLED COMMAND $cmd"
 }

 def on() {
-	delayBetween([
-			zwave.basicV1.basicSet(value: 0xFF).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	],5000)
+	log.info "on"
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }

 def off() {
-	delayBetween([
-			zwave.basicV1.basicSet(value: 0x00).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	],5000)
+	delayBetween ([zwave.basicV1.basicSet(value: 0x00).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }

 def setLevel(value) {
-	log.debug "setLevel >> value: $value"
 	def valueaux = value as Integer
-	def level = Math.max(Math.min(valueaux, 99), 0)
-	if (level > 0) {
-		sendEvent(name: "switch", value: "on")
-	} else {
-		sendEvent(name: "switch", value: "off")
-	}
-	sendEvent(name: "level", value: level, unit: "%")
+	def level = Math.min(valueaux, 99)
 	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }

 def setLevel(value, duration) {
-	log.debug "setLevel >> value: $value, duration: $duration"
 	def valueaux = value as Integer
-	def level = Math.max(Math.min(valueaux, 99), 0)
+	def level = Math.min(valueaux, 99)
 	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
-	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
-	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
-				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
+	zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format()
 }

 def poll() {
@@ -192,27 +197,21 @@ def poll() {
 }

 def refresh() {
-	log.debug "refresh() is called"
-	def commands = []
-	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
-	if (getDataValue("MSR") == null) {
-		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
-	}
-	delayBetween(commands,100)
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }

 def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on")
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
 	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }

 def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off")
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
 	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }

 def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never")
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
 	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }

@@ -223,4 +222,4 @@ def invertSwitch(invert=true) {
 	else {
 		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
 	}
-}
+}
--- a/devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy
+++ b/devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy
@@ -1,455 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-    definition (name: "Fibaro Smoke Sensor", namespace: "smartthings", author: "SmartThings") {
-        capability "Battery" //attributes: battery
-        capability "Configuration"  //commands: configure()
-        capability "Sensor"
-        capability "Smoke Detector" //attributes: smoke ("detected","clear","tested")
-        capability "Temperature Measurement" //attributes: temperature
-        attribute "tamper", "enum", ["detected", "clear"]
-        attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
-        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
-    }
-    simulator {
-        //battery
-        for (int i in [0, 5, 10, 15, 50, 99, 100]) {
-            status "battery ${i}%":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
-                    new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i)
-            ).incomingMessage()
-        }
-        status "battery 100%": "command: 8003, payload: 64"
-        status "battery 5%": "command: 8003, payload: 05"
-        //smoke
-        status "smoke detected": "command: 7105, payload: 01 01"
-        status "smoke clear": "command: 7105, payload: 01 00"
-        status "smoke tested": "command: 7105, payload: 01 03"
-        //temperature
-        for (int i = 0; i <= 100; i += 20) {
-            status "temperature ${i}F": new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
-                    new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1)
-            ).incomingMessage()
-        }
-    }
-    preferences {
-        input description: "After successful installation, please click B-button at the Fibaro Smoke Sensor to update device status and configuration",
-                title: "Instructions", displayDuringSetup: true, type: "paragraph", element: "paragraph"
-        input description: "Enter the menu by press and hold B-button for 3 seconds. Once indicator glows WHITE, release the B-button. Visual indicator will start changing colours in sequence. Press B-button briefly when visual indicator glows GREEN",
-                title: "To check smoke detection state", displayDuringSetup: true, type: "paragraph", element: "paragraph"
-        input description: "Please consult Fibaro Smoke Sensor operating manual for advanced setting options. You can skip this configuration to use default settings",
-                title: "Advanced Configuration", displayDuringSetup: true, type: "paragraph", element: "paragraph"
-        input "smokeSensorSensitivity", "enum", title: "Smoke Sensor Sensitivity", options: ["High","Medium","Low"], defaultValue: "${smokeSensorSensitivity}", displayDuringSetup: true
-        input "zwaveNotificationStatus", "enum", title: "Notifications Status", options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
-                defaultValue: "${zwaveNotificationStatus}", displayDuringSetup: true
-        input "visualIndicatorNotificationStatus", "enum", title: "Visual Indicator Notifications Status",
-                options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
-                defaultValue: "${visualIndicatorNotificationStatus}", displayDuringSetup: true
-        input "soundNotificationStatus", "enum", title: "Sound Notifications Status",
-                options: ["disabled","casing opened","exceeding temperature threshold", "lack of Z-Wave range", "all notifications"],
-                defaultValue: "${soundNotificationStatus}", displayDuringSetup: true
-        input "temperatureReportInterval", "enum", title: "Temperature Report Interval",
-                options: ["reports inactive", "5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${temperatureReportInterval}", displayDuringSetup: true
-        input "temperatureReportHysteresis", "number", title: "Temperature Report Hysteresis", description: "Available settings: 1-100 C", range: "1..100", displayDuringSetup: true
-        input "temperatureThreshold", "number", title: "Overheat Temperature Threshold", description: "Available settings: 0 or 2-100 C", range: "0..100", displayDuringSetup: true
-        input "excessTemperatureSignalingInterval", "enum", title: "Excess Temperature Signaling Interval",
-                options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${excessTemperatureSignalingInterval}", displayDuringSetup: true
-        input "lackOfZwaveRangeIndicationInterval", "enum", title: "Lack of Z-Wave Range Indication Interval",
-                options: ["5 minutes", "15 minutes", "30 minutes", "1 hour", "6 hours", "12 hours", "18 hours", "24 hours"], defaultValue: "${lackOfZwaveRangeIndicationInterval}", displayDuringSetup: true
-    }
-    tiles (scale: 2){
-        multiAttributeTile(name:"smoke", type: "lighting", width: 6, height: 4){
-            tileAttribute ("device.smoke", key: "PRIMARY_CONTROL") {
-                attributeState("clear", label:"CLEAR", icon:"st.alarm.smoke.clear", backgroundColor:"#ffffff")
-                attributeState("detected", label:"SMOKE", icon:"st.alarm.smoke.smoke", backgroundColor:"#e86d13")
-                attributeState("tested", label:"TEST", icon:"st.alarm.smoke.test", backgroundColor:"#e86d13")
-                attributeState("replacement required", label:"REPLACE", icon:"st.alarm.smoke.test", backgroundColor:"#FFFF66")
-                attributeState("unknown", label:"UNKNOWN", icon:"st.alarm.smoke.test", backgroundColor:"#ffffff")
-            }
-            tileAttribute ("device.battery", key: "SECONDARY_CONTROL") {
-                attributeState "battery", label:'Battery: ${currentValue}%', unit:"%"
-            }
-        }
-        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "battery", label:'${currentValue}% battery', unit:"%"
-        }
-        valueTile("temperature", "device.temperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "temperature", label:'${currentValue}°', unit:"C"
-        }
-        valueTile("heatAlarm", "device.heatAlarm", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "clear", label:'TEMPERATURE OK', backgroundColor:"#ffffff"
-            state "overheat detected", label:'OVERHEAT DETECTED', backgroundColor:"#ffffff"
-            state "rapid temperature rise", label:'RAPID TEMP RISE', backgroundColor:"#ffffff"
-            state "underheat detected", label:'UNDERHEAT DETECTED', backgroundColor:"#ffffff"
-        }
-        valueTile("tamper", "device.tamper", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "clear", label:'NO TAMPER', backgroundColor:"#ffffff"
-            state "detected", label:'TAMPER DETECTED', backgroundColor:"#ffffff"
-        }
-
-        main "smoke"
-        details(["smoke","temperature"])
-    }
-}
-
-def updated() {
-    log.debug "Updated with settings: ${settings}"
-    setConfigured("false") //wait until the next time device wakeup to send configure command
-}
-
-def parse(String description) {
-    log.debug "parse() >> description: $description"
-    def result = null
-    if (description.startsWith("Err 106")) {
-        log.debug "parse() >> Err 106"
-        result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
-                descriptionText: "This sensor failed to complete the network security key exchange. " +
-                        "If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
-    } else if (description != "updated") {
-        log.debug "parse() >> zwave.parse(description)"
-        def cmd = zwave.parse(description, [0x31: 5, 0x71: 3, 0x84: 1])
-        if (cmd) {
-            result = zwaveEvent(cmd)
-        }
-    }
-    log.debug "After zwaveEvent(cmd) >> Parsed '${description}' to ${result.inspect()}"
-    return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
-    log.info "Executing zwaveEvent 86 (VersionV1): 12 (VersionReport) with cmd: $cmd"
-    def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
-    updateDataValue("fw", fw)
-    def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
-    createEvent(descriptionText: text, isStateChange: false)
-}
-
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-    def map = [ name: "battery", unit: "%" ]
-    if (cmd.batteryLevel == 0xFF) {
-        map.value = 1
-        map.descriptionText = "${device.displayName} battery is low"
-        map.isStateChange = true
-    } else {
-        map.value = cmd.batteryLevel
-    }
-    setConfigured("true")  //when battery is reported back meaning configuration is done
-    //Store time of last battery update so we don't ask every wakeup, see WakeUpNotification handler
-    state.lastbatt = now()
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationBusy cmd) {
-    def msg = cmd.status == 0 ? "try again later" :
-            cmd.status == 1 ? "try again in $cmd.waitTime seconds" :
-                    cmd.status == 2 ? "request queued" : "sorry"
-    createEvent(displayed: true, descriptionText: "$device.displayName is busy, $msg")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationRejectedRequest cmd) {
-    createEvent(displayed: true, descriptionText: "$device.displayName rejected the last request")
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-    setSecured()
-    def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x71: 3, 0x84: 1])
-    if (encapsulatedCommand) {
-        log.debug "command: 98 (Security) 81(SecurityMessageEncapsulation) encapsulatedCommand:  $encapsulatedCommand"
-        zwaveEvent(encapsulatedCommand)
-    } else {
-        log.warn "Unable to extract encapsulated cmd from $cmd"
-        createEvent(descriptionText: cmd.toString())
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
-    log.info "Executing zwaveEvent 98 (SecurityV1): 03 (SecurityCommandsSupportedReport) with cmd: $cmd"
-    setSecured()
-    log.info "checking this MSR : ${getDataValue("MSR")} before sending configuration to device"
-    if (getDataValue("MSR")?.startsWith("010F-0C02")){
-        response(configure()) //configure device using SmartThings default settings
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.NetworkKeyVerify cmd) {
-    log.info "Executing zwaveEvent 98 (SecurityV1): 07 (NetworkKeyVerify) with cmd: $cmd (node is securely included)"
-    createEvent(name:"secureInclusion", value:"success", descriptionText:"Secure inclusion was successful", isStateChange: true, displayed: true)
-    //after device securely joined the network, call configure() to config device
-    setSecured()
-    log.info "checking this MSR : ${getDataValue("MSR")} before sending configuration to device"
-    if (getDataValue("MSR")?.startsWith("010F-0C02")){
-        response(configure()) //configure device using SmartThings default settings
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-    log.info "Executing zwaveEvent 71 (NotificationV3): 05 (NotificationReport) with cmd: $cmd"
-    def result = []
-    if (cmd.notificationType == 7) {
-        switch (cmd.event) {
-            case 0:
-                result << createEvent(name: "tamper", value: "clear", displayed: false)
-                break
-            case 3:
-                result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName casing was opened")
-                break
-        }
-    } else if (cmd.notificationType == 1) { //Smoke Alarm (V2)
-        log.debug "notificationv3.NotificationReport: for Smoke Alarm (V2)"
-        result << smokeAlarmEvent(cmd.event)
-    }  else if (cmd.notificationType == 4) { // Heat Alarm (V2)
-        log.debug "notificationv3.NotificationReport: for Heat Alarm (V2)"
-        result << heatAlarmEvent(cmd.event)
-    } else {
-        log.warn "Need to handle this cmd.notificationType: ${cmd.notificationType}"
-        result << createEvent(descriptionText: cmd.toString(), isStateChange: false)
-    }
-    result
-}
-
-def smokeAlarmEvent(value) {
-    log.debug "smokeAlarmEvent(value): $value"
-    def map = [name: "smoke"]
-    if (value == 1 || value == 2) {
-        map.value = "detected"
-        map.descriptionText = "$device.displayName detected smoke"
-    } else if (value == 0) {
-        map.value = "clear"
-        map.descriptionText = "$device.displayName is clear (no smoke)"
-    } else if (value == 3) {
-        map.value = "tested"
-        map.descriptionText = "$device.displayName smoke alarm test"
-    } else if (value == 4) {
-        map.value = "replacement required"
-        map.descriptionText = "$device.displayName replacement required"
-    } else {
-        map.value = "unknown"
-        map.descriptionText = "$device.displayName unknown event"
-    }
-    createEvent(map)
-}
-
-def heatAlarmEvent(value) {
-    log.debug "heatAlarmEvent(value): $value"
-    def map = [name: "heatAlarm"]
-    if (value == 1 || value == 2) {
-        map.value = "overheat detected"
-        map.descriptionText = "$device.displayName overheat detected"
-    } else if (value == 0) {
-        map.value = "clear"
-        map.descriptionText = "$device.displayName heat alarm cleared (no overheat)"
-    } else if (value == 3 || value == 4) {
-        map.value = "rapid temperature rise"
-        map.descriptionText = "$device.displayName rapid temperature rise"
-    } else if (value == 5 || value == 6) {
-        map.value = "underheat detected"
-        map.descriptionText = "$device.displayName underheat detected"
-    } else {
-        map.value = "unknown"
-        map.descriptionText = "$device.displayName unknown event"
-    }
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
-    log.info "Executing zwaveEvent 84 (WakeUpV1): 07 (WakeUpNotification) with cmd: $cmd"
-    log.info "checking this MSR : ${getDataValue("MSR")} before sending configuration to device"
-    def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
-    def cmds = []
-    /* check MSR = "manufacturerId-productTypeId" to make sure configuration commands are sent to the right model */
-    if (!isConfigured() && getDataValue("MSR")?.startsWith("010F-0C02")) {
-        result << response(configure()) // configure a newly joined device or joined device with preference update
-    } else {
-        //Only ask for battery if we haven't had a BatteryReport in a while
-        if (!state.lastbatt || (new Date().time) - state.lastbatt > 24*60*60*1000) {
-            log.debug("Device has been configured sending >> batteryGet()")
-            cmds << zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format()
-            cmds << "delay 1200"
-        }
-        log.debug("Device has been configured sending >> wakeUpNoMoreInformation()")
-        cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-        result << response(cmds) //tell device back to sleep
-    }
-    result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
-    log.info "Executing zwaveEvent 31 (SensorMultilevelV5): 05 (SensorMultilevelReport) with cmd: $cmd"
-    def map = [:]
-    switch (cmd.sensorType) {
-        case 1:
-            map.name = "temperature"
-            def cmdScale = cmd.scale == 1 ? "F" : "C"
-            map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-            map.unit = getTemperatureScale()
-            break
-        default:
-            map.descriptionText = cmd.toString()
-    }
-    createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-    log.info "Executing zwaveEvent 5A (DeviceResetLocallyV1) : 01 (DeviceResetLocallyNotification) with cmd: $cmd"
-    createEvent(descriptionText: cmd.toString(), isStateChange: true, displayed: true)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-    log.info "Executing zwaveEvent 72 (ManufacturerSpecificV2) : 05 (ManufacturerSpecificReport) with cmd: $cmd"
-    log.debug "manufacturerId:   ${cmd.manufacturerId}"
-    log.debug "manufacturerName: ${cmd.manufacturerName}"
-    log.debug "productId:        ${cmd.productId}"
-    log.debug "productTypeId:    ${cmd.productTypeId}"
-    def result = []
-    def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-    updateDataValue("MSR", msr)
-    log.debug "After device is securely joined, send commands to update tiles"
-    result << zwave.batteryV1.batteryGet()
-    result << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
-    result << zwave.wakeUpV1.wakeUpNoMoreInformation()
-    [[descriptionText:"${device.displayName} MSR report"], response(commands(result, 5000))]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.associationv2.AssociationReport cmd) {
-    def result = []
-    if (cmd.nodeId.any { it == zwaveHubNodeId }) {
-        result << createEvent(descriptionText: "$device.displayName is associated in group ${cmd.groupingIdentifier}")
-    } else if (cmd.groupingIdentifier == 1) {
-        result << createEvent(descriptionText: "Associating $device.displayName in group ${cmd.groupingIdentifier}")
-        result << response(zwave.associationV1.associationSet(groupingIdentifier:cmd.groupingIdentifier, nodeId:zwaveHubNodeId))
-    }
-    result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-    log.warn "General zwaveEvent cmd: ${cmd}"
-    createEvent(descriptionText: cmd.toString(), isStateChange: false)
-}
-
-def configure() {
-// This sensor joins as a secure device if you tripple-click the button to include it
-    log.debug "configure() >> isSecured() : ${isSecured()}"
-    if (!isSecured()) {
-        log.debug "Fibaro smoke sensor not sending configure until secure"
-        return []
-    } else {
-        log.info "${device.displayName} is configuring its settings"
-        def request = []
-
-        //1. configure wakeup interval : available: 0, 4200s-65535s, device default 21600s(6hr)
-        request += zwave.wakeUpV1.wakeUpIntervalSet(seconds:6*3600, nodeid:zwaveHubNodeId)
-
-        //2. Smoke Sensitivity 3 levels: 1-HIGH , 2-MEDIUM (default), 3-LOW
-        if (smokeSensorSensitivity && smokeSensorSensitivity != "null") {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1,
-                    scaledConfigurationValue:
-                            smokeSensorSensitivity == "High" ? 1 :
-                                    smokeSensorSensitivity == "Medium" ? 2 :
-                                            smokeSensorSensitivity == "Low" ? 3 : 2)
-        }
-        //3. Z-Wave notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable
-        if (zwaveNotificationStatus && zwaveNotificationStatus != "null"){
-            request += zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: notificationOptionValueMap[zwaveNotificationStatus] ?: 0)
-        }
-        //4. Visual indicator notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable, 4-lack of range notification
-        if (visualIndicatorNotificationStatus && visualIndicatorNotificationStatus != "null") {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: notificationOptionValueMap[visualIndicatorNotificationStatus] ?: 0)
-        }
-        //5. Sound notification status: 0-all disabled (default), 1-casing open enabled, 2-exceeding temp enable, 4-lack of range notification
-        if (soundNotificationStatus && soundNotificationStatus != "null") {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: notificationOptionValueMap[soundNotificationStatus] ?: 0)
-        }
-        //6. Temperature report interval: 0-report inactive, 1-8640 (multiply by 10 secs) [10s-24hr], default 180 (30 minutes)
-        if (temperatureReportInterval && temperatureReportInterval != "null") {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 20, size: 2, scaledConfigurationValue: timeOptionValueMap[temperatureReportInterval] ?: 180)
-        } else { //send SmartThings default configuration
-            request += zwave.configurationV1.configurationSet(parameterNumber: 20, size: 2, scaledConfigurationValue: 180)
-        }
-        //7. Temperature report hysteresis: 1-100 (in 0.1C step) [0.1C - 10C], default 10 (1 C)
-        if (temperatureReportHysteresis && temperatureReportHysteresis != null) {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 21, size: 1, scaledConfigurationValue: temperatureReportHysteresis < 1 ? 1 : temperatureReportHysteresis > 100 ? 100 : temperatureReportHysteresis)
-        }
-        //8. Temperature threshold: 1-100 (C), default 55 (C)
-        if (temperatureThreshold && temperatureThreshold != null) {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 30, size: 1, scaledConfigurationValue: temperatureThreshold < 1 ? 1 : temperatureThreshold > 100 ? 100 : temperatureThreshold)
-        }
-        //9. Excess temperature signaling interval: 1-8640 (multiply by 10 secs) [10s-24hr], default 180 (30 minutes)
-        if (excessTemperatureSignalingInterval && excessTemperatureSignalingInterval != "null") {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 31, size: 2, scaledConfigurationValue: timeOptionValueMap[excessTemperatureSignalingInterval] ?: 180)
-        } else { //send SmartThings default configuration
-            request += zwave.configurationV1.configurationSet(parameterNumber: 31, size: 2, scaledConfigurationValue: 180)
-        }
-        //10. Lack of Z-Wave range indication interval: 1-8640 (multiply by 10 secs) [10s-24hr], default 2160 (6 hours)
-        if (lackOfZwaveRangeIndicationInterval && lackOfZwaveRangeIndicationInterval != "null") {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 32, size: 2, scaledConfigurationValue: timeOptionValueMap[lackOfZwaveRangeIndicationInterval] ?: 2160)
-        } else {
-            request += zwave.configurationV1.configurationSet(parameterNumber: 32, size: 2, scaledConfigurationValue: 2160)
-        }
-        //11. get battery level when device is paired
-        request += zwave.batteryV1.batteryGet()
-
-        //12. get temperature reading from device
-        request += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01)
-
-        commands(request) + ["delay 10000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
-    }
-}
-
-private def getTimeOptionValueMap() { [
-        "5 minutes"  : 30,
-        "15 minutes" : 90,
-        "30 minutes" : 180,
-        "1 hour"     : 360,
-        "6 hours"    : 2160,
-        "12 hours"   : 4320,
-        "18 hours"   : 6480,
-        "24 hours"   : 8640,
-        "reports inactive" : 0,
-]}
-
-private def getNotificationOptionValueMap() { [
-        "disabled" : 0,
-        "casing opened" : 1,
-        "exceeding temperature threshold" : 2,
-        "lack of Z-Wave range" : 4,
-        "all notifications" : 7,
-]}
-
-private command(physicalgraph.zwave.Command cmd) {
-    if (isSecured()) {
-        log.info "Sending secured command: ${cmd}"
-        zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-    } else {
-        log.info "Sending unsecured command: ${cmd}"
-        cmd.format()
-    }
-}
-
-private commands(commands, delay=200) {
-    log.info "inside commands: ${commands}"
-    delayBetween(commands.collect{ command(it) }, delay)
-}
-
-private setConfigured(configure) {
-    updateDataValue("configured", configure)
-}
-private isConfigured() {
-    getDataValue("configured") == "true"
-}
-private setSecured() {
-    updateDataValue("secured", "true")
-}
-private isSecured() {
-    getDataValue("secured") == "true"
-}
--- a/devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy
+++ b/devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy
@@ -25,7 +25,7 @@ metadata {
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
 			state("present", labelIcon:"st.presence.tile.mobile-present", backgroundColor:"#53a7c0")
-			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ebeef2")
+			state("not present", labelIcon:"st.presence.tile.mobile-not-present", backgroundColor:"#ffffff")
 		}
 		main "presence"
 		details "presence"
--- a/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
+++ b/devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy
@@ -346,8 +346,8 @@ def getTemperature(value) {
 		log.debug "Acceleration"
        def name = "acceleration"
 		def value = numValue.endsWith("1") ? "active" : "inactive"
-		def linkText = getLinkText(device)
-		def descriptionText = "$linkText was $value"
+		//def linkText = getLinkText(device)
+		def descriptionText = "was $value"
 		def isStateChange = isStateChange(device, name, value)
 		[
 			name: name,
--- a/devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy
@@ -1,98 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Power Meter"
-        capability "Sensor"
-        capability "Switch"
-        capability "Switch Level"
-
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"
-    }
-
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("power", key: "SECONDARY_CONTROL") {
-                attributeState "power", label:'${currentValue} W'
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else if (resultMap.type == "power") {
-            def powerValue
-            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-                sendEvent(name: "power", value: powerValue)
-            }
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off()
-}
-
-def on() {
-    zigbee.on()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value)
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
-}
--- a/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
+++ b/devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy
@@ -11,77 +11,133 @@
 *  for the specific language governing permissions and limitations under the License.
 *
 */
-
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-        capability "Switch"
-        capability "Switch Level"
+	definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Configuration"
+		capability "Sensor"
+		capability "Refresh"

+		fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0B05", outClusters: "0019"
+	}

-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
-    }
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"

-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
+		}
+		main "switch"
+		details(["switch", "refresh", "level", "levelSliderControl"])
+	}
 }

 // Parse incoming device messages to generate events
 def parse(String description) {
-    log.debug "description is $description"
+	log.info description
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		log.trace msg
+		log.trace "data: $msg.data"
+	}
+	else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+		log.debug "Parse returned ${result?.descriptionText}"
+		return result
+	}
+}

-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
+// Commands to device
+def on() {
+	log.debug "on()"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
 }

 def off() {
-    zigbee.off()
+	log.debug "off()"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
 }
-
-def on() {
-    zigbee.on()
-}
-
 def setLevel(value) {
-    zigbee.setLevel(value)
+	log.trace "setLevel($value)"
+	def cmds = []
+
+	if (value == 0) {
+		sendEvent(name: "switch", value: "off")
+		cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 0 {}"
+	}
+	else if (device.latestValue("switch") == "off") {
+        sendEvent(name: "switch", value: "on")
+        cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 6 1 {}"
+        
+	}
+
+	sendEvent(name: "level", value: value)
+    def level = hexString(Math.round(value * 255/100))
+	cmds << "st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {${level} 0000}"
+
+	//log.debug cmds
+	cmds
 }

 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
+	[
+		"st wattr 0x${device.deviceNetworkId} 1 6 0", "delay 200",
+		"st wattr 0x${device.deviceNetworkId} 1 8 0"
+	]
 }

 def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+
+	/*log.debug "binding to switch and level control cluster"
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}"
+	]
+    */
+
+	//set transition time to 2 seconds. Not currently working.
+	"st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {1400}"
+}
+
+
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
 }
--- a/devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy
+++ b/devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy
@@ -1,161 +0,0 @@
-/**
- *  ZigBee Lock
- *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
- metadata {
-    definition (name: "ZigBee Lock", namespace: "smartthings", author: "SmartThings")
-    {
-        capability "Actuator"
-        capability "Lock"
-        capability "Refresh"
-        capability "Sensor"
-        capability "Battery"
-        capability "Configuration"
-
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10", deviceJoinName: "Kwikset 10-Button Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019",
-                        manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_10T", deviceJoinName: "Kwikset 10-Button Touch Deadbolt"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019",
-                        manufacturer: "Yale", model: "YRL220 TS LL", deviceJoinName: "Yale YRL220 Lock"
-    }
-
-    tiles(scale: 2) {
-		multiAttributeTile(name:"toggle", type:"generic", width:6, height:4){
-			tileAttribute ("device.lock", key:"PRIMARY_CONTROL") {
-				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
-				attributeState "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
-				attributeState "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
-				attributeState "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
-			}
-		}
-		standardTile("lock", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
-			state "default", label:'lock', action:"lock.lock", icon:"st.locks.lock.locked", nextState:"locking"
-		}
-		standardTile("unlock", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
-			state "default", label:'unlock', action:"lock.unlock", icon:"st.locks.lock.unlocked", nextState:"unlocking"
-		}
-		valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		standardTile("refresh", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-
-		main "toggle"
-		details(["toggle", "lock", "unlock", "battery", "refresh"])
-	}
-}
-
-// Globals
-private getCLUSTER_POWER() { 0x0001 }
-private getCLUSTER_DOORLOCK() { 0x0101 }
-
-private getDOORLOCK_CMD_LOCK_DOOR() { 0x00 }
-private getDOORLOCK_CMD_UNLOCK_DOOR() { 0x01 }
-private getDOORLOCK_ATTR_LOCKSTATE() { 0x0000 }
-private getPOWER_ATTR_BATTERY_PERCENTAGE_REMAINING() { 0x0021 }
-
-private getTYPE_U8() { 0x20 }
-private getTYPE_ENUM8() { 0x30 }
-
-// Public methods
-def installed() {
-    log.trace "installed()"
-}
-
-def uninstalled() {
-    log.trace "uninstalled()"
-}
-
-def configure() {
-    def cmds =
-        zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
-                           "${TYPE_ENUM8}", 0, 3600, "{01}") +
-        zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
-                           "${TYPE_U8}", 3600, 3600, "{01}")
-    log.info "configure() --- cmds: $cmds"
-    return cmds + refresh() // send refresh cmds as part of config
-}
-
-def refresh() {
-    def cmds =
-        zigbee.refreshData("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}") +
-        zigbee.refreshData("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}")
-    log.info "refresh() --- cmds: $cmds"
-    return cmds
-}
-
-def parse(String description) {
-    log.trace "parse() --- description: $description"
-
-    Map map = [:]
-    if (description?.startsWith('read attr -')) {
-        map = parseReportAttributeMessage(description)
-    }
-
-    log.debug "parse() --- Parse returned $map"
-    def result = map ? createEvent(map) : null
-    return result
-}
-
-// Lock capability commands
-def lock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
-    log.info "lock() -- cmds: $cmds"
-    return cmds
-}
-
-def unlock() {
-    def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
-    log.info "unlock() -- cmds: $cmds"
-    return cmds
-}
-
-// Private methods
-private Map parseReportAttributeMessage(String description) {
-    log.trace "parseReportAttributeMessage() --- description: $description"
-
-    Map descMap = zigbee.parseDescriptionAsMap(description)
-
-    log.debug "parseReportAttributeMessage() --- descMap: $descMap"
-
-    Map resultMap = [:]
-    if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
-        resultMap.name = "battery"
-        // BatteryPercentageRemaining is specified in .5% increments
-        resultMap.value = Integer.parseInt(descMap.value, 16) / 2
-        log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
-    }
-    else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {
-        def value = Integer.parseInt(descMap.value, 16)
-        resultMap.name = "lock"
-        resultMap.putAll([0:["value":"unknown",
-                             "descriptionText":"Not fully locked"],
-                          1:["value":"locked"],
-                          2:["value":"unlocked"]].get(value,
-                                                      ["value":"unknown",
-                                                       "descriptionText":"Unknown lock state"]))
-        log.info "parseReportAttributeMessage() --- lock: ${resultMap.value}"
-    }
-    else {
-        log.debug "parseReportAttributeMessage() --- ignoring attribute"
-    }
-    return resultMap
-}
--- a/devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy
+++ b/devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy
@@ -1,90 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZigBee Switch Power", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Power Meter"
-        capability "Sensor"
-        capability "Switch"
-
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
-    }
-
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("power", key: "SECONDARY_CONTROL") {
-                attributeState "power", label:'${currentValue} W'
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else if (resultMap.type == "power") {
-            def powerValue
-            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-                sendEvent(name: "power", value: powerValue)
-            }
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off()
-}
-
-def on() {
-    zigbee.on()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh() + zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.simpleMeteringPowerConfig() + zigbee.electricMeasurementPowerConfig() + zigbee.onOffRefresh() + zigbee.simpleMeteringPowerRefresh() + zigbee.electricMeasurementPowerRefresh()
-}
--- a/devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy
+++ b/devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy
@@ -1,89 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-
-metadata {
-    definition (name: "ZigBee Switch", namespace: "smartthings", author: "SmartThings") {
-        capability "Actuator"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-        capability "Switch"
-
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006"
-    }
-
-    // simulator metadata
-    simulator {
-        // status messages
-        status "on": "on/off: 1"
-        status "off": "on/off: 0"
-
-        // reply messages
-        reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
-    }
-
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-        }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-        main "switch"
-        details(["switch", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def resultMap = zigbee.getKnownDescription(description)
-    if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off()
-}
-
-def on() {
-    zigbee.on()
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.onOffConfig()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.onOffRefresh()
-}
--- a/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
+++ b/devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy
@@ -1,130 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  ZigBee White Color Temperature Bulb
- *
- *  Author: SmartThings
- *  Date: 2015-09-22
- */
-
-metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
-
-        capability "Actuator"
-        capability "Color Temperature"
-        capability "Configuration"
-        capability "Refresh"
-        capability "Sensor"
-        capability "Switch"
-        capability "Switch Level"
-
-        attribute "colorName", "string"
-        command "setGenericName"
-
-        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04", outClusters: "0019"
-    }
-
-    // UI tile definitions
-    tiles(scale: 2) {
-        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-                attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
-                attributeState "colorName", label:'${currentValue}'
-            }
-        }
-
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-        main(["switch"])
-        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-    log.debug "description is $description"
-
-    def finalResult = zigbee.getKnownDescription(description)
-    if (finalResult) {
-        log.info finalResult
-        if (finalResult.type == "update") {
-            log.info "$device updates: ${finalResult.value}"
-        }
-        else {
-            sendEvent(name: finalResult.type, value: finalResult.value)
-        }
-    }
-    else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
-        log.debug zigbee.parseDescriptionAsMap(description)
-    }
-}
-
-def off() {
-    zigbee.off()
-}
-
-def on() {
-    zigbee.on()
-}
-
-def setLevel(value) {
-    zigbee.setLevel(value)
-}
-
-def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
-}
-
-def configure() {
-    log.debug "Configuring Reporting and Bindings."
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
-}
-
-def setColorTemperature(value) {
-    setGenericName(value)
-    zigbee.setColorTemperature(value)
-}
-
-//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
-def setGenericName(value){
-    if (value != null) {
-        def genericName = "White"
-        if (value < 3300) {
-            genericName = "Soft White"
-        } else if (value < 4150) {
-            genericName = "Moonlight"
-        } else if (value <= 5000) {
-            genericName = "Cool White"
-        } else if (value >= 5000) {
-            genericName = "Daylight"
-        }
-        sendEvent(name: "colorName", value: genericName)
-    }
-}
--- a/devicetypes/superuser/switch-too.src/switch-too.groovy
+++ b/devicetypes/superuser/switch-too.src/switch-too.groovy
@@ -0,0 +1,48 @@
+/**
+ *  Switch Too
+ *
+ *  Copyright 2015 Bob Florian
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Switch Too", author: "Bob Florian") {
+		capability "Switch"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		// TODO: define your main and details tiles here
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+	// TODO: handle 'switch' attribute
+
+}
+
+// handle commands
+def on() {
+	log.debug "Executing 'on'"
+	// TODO: handle 'on' command
+}
+
+def off() {
+	log.debug "Executing 'off'"
+	// TODO: handle 'off' command
+}
+
+
--- a/smartapps/smartthings/roof-coil-controller.src/roof-coil-controller.groovy
+++ b/smartapps/smartthings/roof-coil-controller.src/roof-coil-controller.groovy
@@ -0,0 +1,200 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  lg kahn smart app to turn device on when temp is between two values
+ *  and off otherwise. Also has to be between 2 date ranges.
+ *  also give alerts when turning on off. 
+ *  I use for a roof heater wire/coil.
+ *
+ *  Author: LGKahn kahn-st@lgk.com
+ */
+ 
+definition(
+    name: "Roof Coil Controller",
+    namespace: "smartthings",
+    author: "lgkahn",
+    description: "Control a roof coil or othe device(s) when temperature is between two values turns on and also has to be within a date range. Automatically turns off if one of the conditions is not met. Alerting option also.",
+    category: "Green Living",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/temp_thermo-switch.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/temp_thermo-switch@2x.png"
+)
+
+preferences {
+	section("Choose a temperature sensor... "){
+		input "sensor", "capability.temperatureMeasurement", title: "Sensor"
+	}
+	section("Select the outlet(s)... "){
+		input "outlets", "capability.switch", title: "Outlets", multiple: true
+	}
+	section("Turn on when temp is above ..."){
+		input "onSetPoint", "decimal", title: "Set On Temp"
+	}
+	section("Turn off when temp is above ..."){
+		input "offSetPoint", "decimal", title: "Set Off Temp"
+	}
+	section("Start after Date format (yyyymmdd)..."){
+		input "startDate", "number", title: "Date?"
+	}
+	section("End after Date format (yyyymmdd)..."){
+		input "endDate", "number", title: "Date?"
+	}
+	section("Time Zone Offset ie -5 etc...."){
+		input "tzOffset", "number", title: "Offset?", range: "-12..12"
+	}
+     section( "Notifications" ) {
+        input("recipients", "contact", title: "Send notifications to") {
+            input "sendPushMessage", "enum", title: "Send a push notification?", options: ["Yes", "No"], required: false
+            input "phone1", "phone", title: "Send a Text Message?", required: false
+        }
+    }
+
+}
+
+def installed()
+{
+log.debug "in coil controller installed ... currenttemp = $sensor.currentTemperature"
+	subscribe(sensor, "temperature", temperatureHandler)
+}
+
+def updated()
+{
+log.debug "in coil controller updated ... currenttemp = $sensor.currentTemperature"
+	unsubscribe()
+	subscribe(sensor, "temperature", temperatureHandler)
+  // for debugging and testing uncomment  temperatureHandlerTest()
+}
+
+
+def temperatureHandler(evt)
+{
+def currenttemp = sensor.currentTemperature
+/*
+log.debug "in temp handler"
+log.debug "current temp = $currenttemp"
+log.debug "onSetPoint = $onSetPoint"
+log.debug "offSetPoint = $offSetPoint"
+log.debug "set offset = $tzOffset"
+*/
+	def today = new Date();
+
+		def ltf = new java.text.SimpleDateFormat("yyyyMMdd")
+		ltf.setTimeZone(TimeZone.getTimeZone("GMT${tzOffset}"))
+		 
+         String date1 = ltf.format(today);
+         int intdate = Integer.parseInt(date1)
+        // log.debug "int date = $intdate"
+         //log.debug "enddate = $endDate"
+        // log.debug "startdate = $startDate"
+         def currSwitches = outlets.currentSwitch
+         def onOutlets = currSwitches.findAll { switchVal ->
+         switchVal == "on" ? true : false }
+         
+         if  (((intdate >= startDate) && (intdate <= endDate))
+            && ((currenttemp > onSetPoint) && (currenttemp < offSetPoint)))
+           {
+                     // dont do anything if already on
+                     if (onOutlets.size() != outlets.size())
+                       {
+                         log.debug "turning outlets On as $sensor.displayName is reporting $currenttemp which is between $onSetPoint and $offSetPoint, and we are within the date range ($startDate - $endDate)!"
+            	         mysend("Turning device(s) On as $sensor.displayName is reporting a temperature of $currenttemp which is between $onSetPoint and $offSetPoint, and we are within the date range ($startDate - $endDate)!")
+                         outlets.on()
+                       }
+                      else log.debug "Not turning on again, all already on!"
+                 }
+             else 
+                 {
+                    // dont do anything if already off
+                     if (onOutlets.size() != 0)
+                       {
+                 	    log.debug "turning outlets Off! as $sensor.displayName is reporting $currenttemp which is Not between $onSetPoint and $offSetPoint, or we are no longer within the date range ($startDate - $endDate)!"
+                        mysend("Turning device(s) Off as $sensor.displayName is reporting a temperature of $currenttemp which is not between $onSetPoint and $offSetPoint, or we are no longer within the date range ($startDate - $endDate)!")
+                        outlets.off()
+                       }
+                      else log.debug "All outlets already off!"
+                 }
+}
+
+
+def temperatureHandlerTest()
+{
+//log.trace "temperature: $evt.value, $evt"
+// this routine is only for testing and debugging. to test or make changes uncomment the call in update.
+// this is so we dont have to wait 15 minutes till a half an hour for the event to fire for testing.
+
+def currenttemp = sensor.currentTemperature
+
+log.debug "in temp handler test"
+log.debug "current temp = $currenttemp"
+log.debug "onSetPoint = $onSetPoint"
+log.debug "offSetPoint = $offSetPoint"
+log.debug "set offset = $tzOffset"
+	def today = new Date();
+
+		def ltf = new java.text.SimpleDateFormat("yyyyMMdd")
+		ltf.setTimeZone(TimeZone.getTimeZone("GMT${tzOffset}"))
+		 
+         String date1 = ltf.format(today);
+        int intdate = Integer.parseInt(date1)
+         log.debug "int date = $intdate"
+         log.debug "enddate = $endDate"
+         log.debug "startdate = $startDate"
+         def currSwitches = outlets.currentSwitch
+         def onOutlets = currSwitches.findAll { switchVal ->
+         switchVal == "on" ? true : false }
+
+        log.debug "how many on = ${onOutlets.size()} "
+
+      if  (((intdate >= startDate) && (intdate <= endDate))
+            && ((currenttemp > onSetPoint) && (currenttemp < offSetPoint)))
+           {
+                     // dont do anything if already on
+                     if (onOutlets.size() != outlets.size())
+                       {
+                         log.debug "turning outlets On as $sensor.displayName is reporting $currenttemp which is between $onSetPoint and $offSetPoint, and we are within the date range ($startDate - $endDate)!"
+            	         //mysend("Turning device(s) On as $sensor.displayName is reporting a temperature of $currenttemp which is between $onSetPoint and $offSetPoint, and we are within the date range ($startDate - $endDate)!")
+                         outlets.on()
+                       }
+                      else log.debug "Not turning on again, all already on!"
+                 }
+             else 
+                 {
+                    // dont do anything if already off
+                     if (onOutlets.size() != 0)
+                       {
+                 	    log.debug "turning outlets Off! as $sensor.displayName is reporting $currenttemp which is Not between $onSetPoint and $offSetPoint, or we are no longer within the date range ($startDate - $endDate)!"
+                        //mysend("Turning device(s) Off as $sensor.displayName is reporting a temperature of $currenttemp which is not between $onSetPoint and $offSetPoint, or we are no longer within the date range ($startDate - $endDate)!")
+                        outlets.off()
+                       }
+                      else log.debug "All outlets already off!"
+                 }
+}
+
+
+private mysend(msg) {
+    if (location.contactBookEnabled) {
+        log.debug("sending notifications to: ${recipients?.size()}")
+        sendNotificationToContacts(msg, recipients)
+    }
+    else {
+        if (sendPushMessage != "No") {
+            log.debug("sending push message")
+            sendPush(msg)
+        }
+
+        if (phone1) {
+            log.debug("sending text message")
+            sendSms(phone1, msg)
+        }
+    }
+
+    log.debug msg
+}
--- a/smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy
+++ b/smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy
@@ -1,4 +1,4 @@
-/**
+    /**
     *  Magic Home
     *
     *  Copyright 2014 Tim Slagle
@@ -198,7 +198,7 @@
    
    //set home mode when house is occupied
    def setHome() {
-    sendOutOfDateNotification()
+    
    log.info("Setting Home Mode!!")
    if(anyoneIsHome()) {
          if(state.sunMode == "sunset"){
@@ -319,14 +319,3 @@
    private hideOptionsSection() {
    	(starting || ending || days || modes) ? false : true
    }
-    
-    def sendOutOfDateNotification(){
-    	if(!state.lastTime){
-    		state.lastTime = (new Date() + 31).getTime()
-            sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
-        }
-        else if (((new Date()).getTime()) >= state.lastTime){
-        	sendNotification("Your version of Hello, Home Phrase Director is currently out of date. Please look for the new version of Hello, Home Phrase Director now called 'Routine Director' in the marketplace.")
-        	state.lastTime = (new Date() + 31).getTime()
-        }
-    }
--- a/smartapps/tslagle13/routine-director.src/routine-director.groovy
+++ b/smartapps/tslagle13/routine-director.src/routine-director.groovy
@@ -1,346 +0,0 @@
-/**
- *  Rotuine Director
- *
- *
- *  Changelog
- *
- *  2015-09-01
- *     --Added Contact Book
- *     --Removed references to phrases and replaced with routines
- *     --Added bool logic to inputs instead of enum for "yes" "no" options
- *     --Fixed halting error with code installation
- *
- *  Copyright 2015 Tim Slagle
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Routine Director",
-    namespace: "tslagle13",
-    author: "Tim Slagle",
-    description: "Monitor a set of presence sensors and activate routines based on whether your home is empty or occupied.  Each presence status change will check against the current 'sun state' to run routines based on occupancy and whether the sun is up or down.",
-    category: "Convenience",
-    iconUrl: "http://icons.iconarchive.com/icons/icons8/ios7/512/Very-Basic-Home-Filled-icon.png",
-    iconX2Url: "http://icons.iconarchive.com/icons/icons8/ios7/512/Very-Basic-Home-Filled-icon.png"
-)
-
-preferences {
-    page(name: "selectRoutines")
-
-    page(name: "Settings", title: "Settings", uninstall: true, install: true) {
-        section("False alarm threshold (defaults to 10 min)") {
-            input "falseAlarmThreshold", "decimal", title: "Number of minutes", required: false
-        }
-
-        section("Zip code (for sunrise/sunset)") {
-            input "zip", "text", required: true
-        }
-
-        section("Notifications") {
-            input "sendPushMessage", "bool", title: "Send notifications when house is empty?"
-            input "sendPushMessageHome", "bool", title: "Send notifications when home is occupied?"
-        }
-        section("Send Notifications?") {
-            input("recipients", "contact", title: "Send notifications to") {
-                input "phone", "phone", title: "Send an SMS to this number?", required:false
-            }
-        }
-
-        section(title: "More options", hidden: hideOptionsSection(), hideable: true) {
-            label title: "Assign a name", required: false
-            input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
-                options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
-            input "modes", "mode", title: "Only when mode is", multiple: true, required: false
-        }
-    }
-}
-
-def selectRoutines() {
-    def configured = (settings.awayDay && settings.awayNight && settings.homeDay && settings.homeNight)
-    dynamicPage(name: "selectRoutines", title: "Configure", nextPage: "Settings", uninstall: true) {
-        section("Who?") {
-            input "people", "capability.presenceSensor", title: "Monitor These Presences", required: true, multiple: true, submitOnChange: true
-        }
-
-        def routines = location.helloHome?.getPhrases()*.label
-        if (routines) {
-            routines.sort()
-            section("Run This Routine When...") {
-                    log.trace routines
-                    input "awayDay", "enum", title: "Everyone Is Away And It's Day", required: true, options: routines, submitOnChange: true
-                    input "awayNight", "enum", title: "Everyone Is Away And It's Night", required: true, options: routines, submitOnChange: true
-                    input "homeDay", "enum", title: "At Least One Person Is Home And It's Day", required: true, options: routines, submitOnChange: true
-                    input "homeNight", "enum", title: "At Least One Person Is Home And It's Night", required: true, options: routines, submitOnChange: true
-                }
-                /*    section("Select modes used for each condition.") { This allows the director to know which rotuine has already been ran so it does not run again if someone else comes home. 
-        input "homeModeDay", "mode", title: "Select Mode Used for 'Home Day'", required: true
-        input "homeModeNight", "mode", title: "Select Mode Used for 'Home Night'", required: true
-    }*/
-        }
-    }
-}
-
-def installed() {
-	log.debug "Updated with settings: ${settings}"
-    initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-    unsubscribe()
-    initialize()
-}
-
-def initialize() {
-    subscribe(people, "presence", presence)
-    checkSun()
-    subscribe(location, "sunrise", setSunrise)
-    subscribe(location, "sunset", setSunset)
-    state.homestate = null
-}
-
-//check current sun state when installed.
-def checkSun() {
-    def zip = settings.zip as String
-    def sunInfo = getSunriseAndSunset(zipCode: zip)
-    def current = now()
-
-    if (sunInfo.sunrise.time < current && sunInfo.sunset.time > current) {
-        state.sunMode = "sunrise"
-        runIn(60,"setSunrise")
-    }
-    else {
-        state.sunMode = "sunset"
-        runIn(60,"setSunset")
-    }
-}
-
-//change to sunrise mode on sunrise event
-def setSunrise(evt) {
-    state.sunMode = "sunrise";
-    changeSunMode(newMode);
-    log.debug "Current sun mode is ${state.sunMode}"
-}
-
-//change to sunset mode on sunset event
-def setSunset(evt) {
-    state.sunMode = "sunset";
-    changeSunMode(newMode)
-    log.debug "Current sun mode is ${state.sunMode}"
-}
-
-//change mode on sun event
-def changeSunMode(newMode) {
-    if (allOk) {
-
-        if (everyoneIsAway()) /*&& (state.sunMode == "sunrise")*/ {
-            log.info("Home is Empty  Setting New Away Mode")
-            def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60
-            setAway()
-        }
-/*
-        else if (everyoneIsAway() && (state.sunMode == "sunset")) {
-            log.info("Home is Empty  Setting New Away Mode")
-            def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60
-            setAway()
-        }*/
-        else if (anyoneIsHome()) {
-            log.info("Home is Occupied Setting New Home Mode")
-            setHome()
-
-
-        }
-    }
-}
-
-//presence change run logic based on presence state of home
-def presence(evt) {
-    if (allOk) {
-        if (evt.value == "not present") {
-            log.debug("Checking if everyone is away")
-
-            if (everyoneIsAway()) {
-                log.info("Nobody is home, running away sequence")
-                def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60
-                runIn(delay, "setAway")
-            }
-        }
-        else {
-            def lastTime = state[evt.deviceId]
-            if (lastTime == null || now() - lastTime >= 1 * 60000) {
-                log.info("Someone is home, running home sequence")
-                setHome()
-            }
-            state[evt.deviceId] = now()
-
-        }
-    }
-}
-
-//if empty set home to one of the away modes
-def setAway() {
-    if (everyoneIsAway()) {
-        if (state.sunMode == "sunset") {
-            def message = "Performing \"${awayNight}\" for you as requested."
-            log.info(message)
-            sendAway(message)
-            location.helloHome.execute(settings.awayNight)
-            state.homestate = "away"
-
-        }
-        else if (state.sunMode == "sunrise") {
-            def message = "Performing \"${awayDay}\" for you as requested."
-            log.info(message)
-            sendAway(message)
-            location.helloHome.execute(settings.awayDay)
-            state.homestate = "away"
-        }
-        else {
-            log.debug("Mode is the same, not evaluating")
-        }
-    }
-}
-
-//set home mode when house is occupied
-def setHome() {
-    log.info("Setting Home Mode!!")
-    if (anyoneIsHome()) {
-        if (state.sunMode == "sunset") {
-            if (state.homestate != "homeNight") {
-                def message = "Performing \"${homeNight}\" for you as requested."
-                log.info(message)
-                sendHome(message)
-                location.helloHome.execute(settings.homeNight)
-                state.homestate = "homeNight"
-            }
-        }
-
-        if (state.sunMode == "sunrise") {
-            if (state.homestate != "homeDay") {
-                def message = "Performing \"${homeDay}\" for you as requested."
-                log.info(message)
-                sendHome(message)
-                location.helloHome.execute(settings.homeDay)
-                state.homestate = "homeDay"
-            }
-        }
-    }
-}
-
-private everyoneIsAway() {
-  def result = true
-
-  if(people.findAll { it?.currentPresence == "present" }) {
-    result = false
-  }
-
-  log.debug("everyoneIsAway: ${result}")
-
-  return result
-}
-
-private anyoneIsHome() {
-  def result = false
-
-  if(people.findAll { it?.currentPresence == "present" }) {
-    result = true
-  }
-
-  log.debug("anyoneIsHome: ${result}")
-
-  return result
-}
-
-def sendAway(msg) {
-    if (sendPushMessage) {
-    	if (recipients) {
-        	sendNotificationToContacts(msg, recipients)
-        }
-        else {
-        	sendPush(msg)
-        	if(phone){
-            		sendSms(phone, msg)
-        	}	
-        }    
-    }
-
-    log.debug(msg)
-}
-
-def sendHome(msg) {
-    if (sendPushMessageHome) {
-    	if (recipients) {
-        	sendNotificationToContacts(msg, recipients)
-        }
-        else {
-        	sendPush(msg)
-                if(phone){
-            		sendSms(phone, msg)
-        	}
-        }    
-    }
-
-    log.debug(msg)
-}
-
-private getAllOk() {
-    modeOk && daysOk && timeOk
-}
-
-private getModeOk() {
-    def result = !modes || modes.contains(location.mode)
-    log.trace "modeOk = $result"
-    result
-}
-
-private getDaysOk() {
-    def result = true
-    if (days) {
-        def df = new java.text.SimpleDateFormat("EEEE")
-        if (location.timeZone) {
-            df.setTimeZone(location.timeZone)
-        }
-        else {
-            df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
-        }
-        def day = df.format(new Date())
-        result = days.contains(day)
-    }
-    log.trace "daysOk = $result"
-    result
-}
-
-private getTimeOk() {
-    def result = true
-    if (starting && ending) {
-        def currTime = now()
-        def start = timeToday(starting, location?.timeZone).time
-        def stop = timeToday(ending, location?.timeZone).time
-        result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
-    }
-    log.trace "timeOk = $result"
-    result
-}
-
-private hhmm(time, fmt = "h:mm a") {
-    def t = timeToday(time, location.timeZone)
-    def f = new java.text.SimpleDateFormat(fmt)
-    f.setTimeZone(location.timeZone?:timeZone(time))
-    f.format(t)
-}
-
-private getTimeIntervalLabel() {
-    (starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z"): ""
-}
-
-private hideOptionsSection() {
-    (starting || ending || days || modes) ? false: true
-}